PCTA CENTRAL STATION REMOTE CONTROL ATLANTIS
FTC_541000007_01
SYSTEM PRESENTATION ATLANTIS SYSTEM
Atlantis Logytel System is a platform composed of a central remote control that allows sending and receiving orders from the states of the field elements controlled by the remote control. Communication with the field elements is performed in IEC-870-IEC-101 or 870-104 depending on the characteristics of communications to remote elements. The system meets the E.T. Adif 03.359.120.7 "Technical and Functional Requirements for the Supply and Installation of Remote Controls Energy (Conventional Lines)" in February 2007. The composition of the system hardware consists of: -
Cluster Server with Real Time functions.
-
Historical Cluster Server with storage features.
-
Communication Server (depending on protocol used).
-
Operating posts with 4 screens
-
Positions of Directors.
The functions of the clusters can be exchanged if a fault occurs on servers RealTime considered, the system will switch to the other servers do not leave the remote out of service at any time. The main functions of Atlantis System are: •
Entry by username and password, can work with user access control by reading identification card.
•
Graphical environment for operation and visualization of all field elements. Allows printing of the screen with the status "current" disconnects.
•
Display and alarm acknowledgment received (enables filtering, saving and printing).
•
•
listings. •
Assists in web format.
•
Access to the administration to authorized users and in positions defined for it.
•
•
Topological representation of the system.
•
Graphic representation of the state of the roads, through a logical application of catenary voltage.
Inserting new lines of communications or changing or deleting existing lines from the
Graphic display of the status of the communications field.
View status of all signals in a database of
administration program. •
Insertion of new remote.
•
Insertion of new signals associated with a remote
•
Editing pages in a simple representation.
A Red de Campo
Servidores de Tiempo Real y Comunicaciones
Servidores de Históricos
Puestos de Operación
Impresora Láser
Impresora Color
Puestos de Administración
FLYING POST
The system has an application called Remote Control Flying Post which allows from any workstation connected to the network (either Ethernet or GPRS) can visualize the facility in real time. With the proper permissions can perform maneuvers from these positions. This application meets the specification defined by ADIF to post flyers.
This application can be put on mobile devices (PDAs), although
Since Volante – Portable
in this case the functionality is restricted to viewing states.
Since Volante - PDA
The functions that implement this application are:
•
Communication with the central network via Ethernet or via GPRS.
•
•
authorized to do so prior grant of permission by the
View the states of the sections of each facility controlled by the Remote
•
Access and historical alarm list.
•
Allows implementation of controls through phone calls (phone calls Digital), prior authorization of the
remote control operator •
Grant access to MAC team and user.
•
Access control through card reader.
Display on the topology of the circuit by flying maneuvers from posts.
•
Functionality similar to a permanent position unless the recognition is not allowed alarm or
remote control operator. •
Allows direct control performance of the facilities
access to the communications side.
SUPPORT SYSTEM
The backup system comprises: - A cluster of servers. - A permanent position with 3 / 4 monitors - A Communications Server (optional)
This system allows remote operation if for any eventuality or disaster, the system fails. On failure, the system is redirected to these servers (which are updated at all times, through database replication), and from the fixed have control of all remote control, being able to operate normally. Additionally it allows to gain control of the system with the appropriate permissions (bomb threats, disasters, etc.).. Features: •
Cluster with two servers and database software updated.
•
Replicated database main server every few minutes.
•
Access from remote fixed positions or from the backup job.
•
The operation of the backup system starts as a result of a head crash or after a request from a supervisor previously identified and authorized.
•
If the operational support system is not active the backup job allows viewing of all information in the permanent position.
ELECTRICAL SYSTEM An application that allows viewing of the entire line in three large format screens. The functions built into this device are: •
Display states of the switches.
•
Status display of routes.
Electric Schema Detail
Topology
• Visualization of topological information of the remote state.
REMOTE CONTROL OPERATOR
The Remote Control Operators of high speed lines is a SCADA
system
representation
of
responsible the
for
information
receiving booths
and
mobile
operators. It consists of a cluster of servers and multiple operating positions. Communication with the operators is done using the protocol IEC-870-104.
•
Application access by username / password.
•
Display of states per line / area / operator.
•
Access to information lines as permits the operator.
•
Display of states by type of user.
•
•
User Management.
Display alarms for all operators.
•
•
Consultation events (Historical).
Alarm Recognition and derecognition only to users with permission.
WIND DETECTORS REMOTE CONTROL SIDE AND DYNAMIC BEHAVIOR PANTOGRAPH
The
Remote
Control
enables
remote
monitoring sensors to remotely monitoring equipment, both Control System Side Wind (SCVL) and the Dynamic Behavior System Pantograph (SCDP) and graph the data collected by the sensors.
•
Application access by username / password.
•
Display of states by area / detector.
•
Display data concerning SCVL and SCDP.
•
User Management.
•
Plot the data received.
•
Consultation events (Historical).
REMOTE DETECTOR falling objects (DCO) The Fall Detector Remote Object allows detection of objects falling overpasses and road tunnel mouths and communicate simultaneously to the command post and electronic
locking
devices
ENCE
information from the non-presence of objects falling through ..
•
Application access by username / password.
•
Implementation of control according to user permissions.
•
Display data on the steps and fibers.
•
User Management.
•
Plot the data received.
•
Consultation events (Historical).
•
Display of states ENCE / technical building / step.
•
Certification SIL4 sensory element detects falling to inform the ENCE for voltage free contacts.
•
Viewing fiber measures.
•
Certification Ethernet communications SIL2 ENCE.
•
Inserting / Updating hot steps.
INSTALLED REMOTE
Logytel have installed the following remote controls: - Remote Power Oviedo - Remote Power Zaragoza - Remote Control Le贸n Catenary - Remote Control Operators Madrid - Barcelona, Madrid-Valladolid, C贸rdoba-M谩laga. (High Speed) - Remote Detector Falling Objects Madrid - Lleida, Medina - Olmedo, Madrid - Levante, Barcelona - Figueras (High Speed). - Remote Detector Madrid - Levante (High Speed).