Marking & Measuring CROWN Rosewood And Brass Marking Set
B
A
Marking And Cutting Gauges
(A) Rosewood Marking Gauge performs two operations. One side of its posts has a single pin for general marking with the grain or on end grain; its other side has double pins adjustable to approximately 2" for layout of mortises. Made with solid brass hardware, wear plates, and fitted with milled thumb screw in head. Overall length 73/4". 145464 . .................................................. $48.99 (B) Rosewood Cutting Gauge is designed for accurate scoring across the grain without tearing. The 1/ " single-beveled cutting iron is held in place by 4 a brass wedge, and a brass thumbscrew grips the sliding post securely. Solid rosewood fence has two inlaid brass wear plates. Overall length 8". 145465 . ................................................. $34.99
We’ve combined the beauty and reliability of imported rosewood and solid brass with three classic bench tools. Try Squares have blued steel blades triple-pinned to their handles. A 1/8" thick brass rub plate protects inside face for accurate readings. 101/2" Bevel with sliding steel blade can be easily secured at any angle by a brass thumb lever. Marking Gauge features an adjusting pull slide for fast layout of mortises. Rosewood post has double steel pins on slide face and a single pin on the reverse face. Rosewood fence has brass wear plates and set knob. Set of 3 includes marking gauge, 101/2" sliding bevel, and 6" try square. 14C50 set of 3 Save Over $15! ..........$79.99 Also available individually. 14C41 marking gauge........................... $38.99 07F87 4" sliding bevel............................$19.99
PFEIL Swiss Made Marking Knives Marking knives A
A-LINE-IT Systems
Quickly setup, tune up, and check the accuracy of your shop’s tools with these systems. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/ chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, outfeed table alignment; router/shaper spindle run-out, or any other set-up or alignment measurement you desire. A-LINE-IT Basic Kit is the perfect for hobbyists and small shops. Each kit contains a 3/4" x 3/4" x 51/2" dial indicator mounting bar, 3/8" x 3/4" x 61/4" miter groove bar with leveling screws and spring plungers for a perfect fit in your miter slot, dial indicator, hardware and hex wrench for assembly, and an instructional DVD. The A-LINE-IT Deluxe Kit includes all of the above but features an 11" long dial indicator mounting bar instead of the 51/2" bar, a planer bar, a precision 1/2" x 33/8" pin for drill press and router tests, special spring and arbor nut to test saw blade and arbor run out, 22-piece tip set for the dial indicator to meet any application, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines. 148719 basic kit....................................... $79.99 148720 deluxe kit.................................. $144.99
are the most accurate way to mark lines for fine joinery layout work. The B flat steel blades on these knives are beveled on only one side so you can mark tight against your straight edge. These knives feature a K720 steel blade with a beautiful Bubinga handle that fits snug in your hand for easy gripping and control. Blade is 3/4" wide and 17/8" long; overall length is 6". 05E72 (A) right hand................................... $27.50 05E73 (B) left hand..................................... $27.50 05E74 set of two, save over $10................$44.99
WoodRiver® Woodworker’s Pencil
This unique pencil with extra thick (5.66mm, about 7/ " D x 3 1/ "L) HB round lead is held firmly in place 32 8
Made in England 143016 144563 14C33 14C15 14C11 14C19
101/2" sliding bevel.................... $30.99 12" sliding bevel........................ $39.99 3" try square................................ $17.99 4" try square............................... $20.99 6" try square.............................. $25.99 9" try square...............................$27.99
PFEIL Swiss Made Marking Knife Kit
These beautiful Swiss made marking tools are perfect for all your joinery layout work. Features a K720 steel blade with a 60° ground point that allows the knife to be used left- or right-handed. The round Bubinga handle with two small flats, to prevent the tool from rolling on your benchtop, fits in the hand like a pencil for accurate marking. Small blade -13/8" x 1/2", large blade-11/2" x 3/4", 7" overall length. 05Z25 lg. blade w/handle 11/2" x 3/4"......$19.99 05B47 sm. blade w/handle, 13/8" x 1/2"....$17.99 05B46 set of two blades only............................... save over $10................................$24.99
by a four-jaw collet. Unscrew the top to access an internal sharpener. Comes with HB (hard) lead. 146807 ..................................................... $15.99 146769 4B soft lead (2)..............................$1.50 146770 HB hard lead (2).............................$1.50 147263 colored lead assort.......................$4.99
Loose Leg Wing Dividers
For scribing circles, arcs, and stepping out equal distances in odd measurements. Includes one fixed leg and a hardened removable point that can be replaced with a pencil. The 6" divider has 81/2" scribing capacity, the 8" model has 131/4". 06C21 6"..........................................................................................$66.99 06C22 8"..........................................................................................$71.50
Wing Dividers
Make more accurate scribes or layouts. The tips of these heavy-duty scribes are precision ground for accuracy and finished with black epoxy coating for durability. The 6" divider has 8" scribing capacity, the 8" has 101/2", and the 16" has 22". 148053 6"...................................................................................... $15.99 148054 8"...................................................................................... $24.99 148055 16".....................................................................................$47.29
FASTCAP AccuScribePRO
10" Metal Sliding Bevel
This high-quality Japanese sliding bevel sets with a twist of a rear-locking screw. The rear locking screw also allows you to lay the bevel flat on either side. The heavy 10" blade is mounted in an aluminum handle. 146020 . ................................................... $24.50
78
The Accuscribe Pro makes it easy to maintain a consistent scribe offset while remaining parallel to the object surface every time. The non-rocking base provides stability, and the articulating pencil head adjusts to accommodate difficult and awkward scribing applications such as scribing around windows and doors. Also ideal for scribing the trim strip on kitchen cabinets, architectural moldings, tile, countertops, splash guards, and even flooring. Includes an oversized thumb screw, a convenient built-in pencil sharpener, and a removable compass point with its own storage clip. 147402 . ...................................................................................................................... $17.99
Credit Card Orders: 800 225-1153
Free Technical Advice: 800 535-4486
www.woodcraft.com