Vises & Clamps
JORGENSEN Rapid-Acting Bench Vises
Turn the hardwood handle a half-turn counter-clockwise and the pivoting nut disengages, allowing you to open or close the jaws to the desired opening in a flash. The machined jaws are toed-in to create the best possible holding power, and included countersunk, tapped holes for custom wood facings if desired. Includes a solid steel front dog to serve as a bench stop for large-project clamping. Appearance of the smaller vise slightly different from larger vise shown in the photo. USA. Face
Opening
16T51 4" x 7"........ 9".................................$134.99 16T52 4" x 10".... 12"................................$154.99
GRÖZ 7" Bench Vise Hardware
The 7" Gröz Front Vise Hardware manufactured from close-grained cast iron features a 3/4" diameter steel main screw with buttress threads and fitted solid steel guide rods that reduce wear and tear, giving the vice hardware a smooth and true parallel action. Main casting and 7" wide face casting are pre-drilled to add jaws and to mount to your workbench. The jaw opens to 83/4" without added components. Includes a finished wooden handle. 148446 ..................................................... $56.99
WILTON Woodworker’s Vise
Features include a metal housing which fully encloses the screw, preventing sawdust and dirt from “gumming” the threads. Front jaw pivots 12 degrees to allow clamping of irregularly shaped objects and the entire front jaw can be “lifted” up and locked in place to serve as a full-length dog. Jaw width 4" x 7", max. opening 10", 29 lbs. Complete with mounting instructions. Vise shown with optional Magnetic Maple Jaws available below. 126504 Wilton vise...................................$179.99 126505 magnetic maple jaw inserts.........$29.99
A
B
D
GRÖZ Rapid Action Woodworking Vises
Small End Vise Slide with 1" dia. x 14" L screw and 4" W x 15" L vise. 144806 (A).................................................. $47.99
These vises feature a unique rapid-action mechanism to tighten the vise simply turn the handle in the usual way but as soon as the handle is turned in the opposite direction, the screw is disengaged and the front jaw slides freely. Vise jaws are equipped with a “toe-in” feature so that when fully closed the jaws meet only at the top for even clamping on the whole depth of the work piece. The steel main screw has Buttress threads for smooth and responsive adjustment. 7" vise has a 7" wide jaw and 8" opening; 9" vise has 9" wide jaw and 13" opening. 148445 7" vise............................................$84.99 148437 9" vise.........................................$115.49
Small Front Vise with 1" dia. x 10" L screw, 3/4" dia. guide rods and 9" W x 13" L vise. 144804 (B)................................................. $51.99 17E46 handle for 144804 & 144806....... $6.50
GRÖZ Portable Hobbyist Vise
WoodRiver® Economy Bench Vise Hardware
Improve your current bench by adding a front vise or use this economical hardware to build a new bench from scratch. We’re sure you’ll find that the rugged castings and precision parts make these economically priced workbench vises a fantastic value. Handle not included.
Large Front Vise with 13/16" dia. x 151/2" L screw, 3/ " dia. guide rods and 10 1/ " W x 19 1/ " L vise. 4 4 4 144805 (C).................................................. $76.99 17E52 handle for 144805 & 144807....... $6.99 Large End Vise Slide with 11/4" dia. x 171/2" L screw and 4" W x 195/8" L vise. 144807 (D).................................................. $79.99
Quick Release Front Vise
Features a machined pivoting nut that engages or releases with a turn of the 1" diameter main screw. 20mm diameter guide rods. Screw and body length 19", width 101/2". Made in Germany. Handle and mounting screws not included. 17A11 . .......................$214.99 17E52 handle.................. $6.99 Economy Quick Release Front Vise. Virtually identical to the hardware above, but made in China. 145444 . ..........................$86.99
Body and jaws are quality castings fitted with two steel slide bars, an acme threaded main screw, and steel sliding handle. Portable and features an integral clamp for tops up to 21/4" thick. Pre-drilled holes to permanently mount to a bench. Jaws are 6" x 2", open to 5" and are pre-drilled for wooden faces. 141673 ......................................................$32.99
German Bench Screw
Favored because of its strength and versatility, these are adaptable for many uses: end vises, cider presses, and bookbinder’s presses. 32mm (1 1/4") diameter screw, length 480 mm (183/4"), screw length 17". Collar and nut are made of malleable cast iron. Made in Germany. Handle and mounting screws not included. 01H41 . ......................................$61.99 17E52 handle............................... $6.99
WoodRiver® Pattern Maker’s Vise
Because of their versatility, vises of this type were the center of a pattern maker’s shop for more than a hundred years. Not only can you swing a clamped workpiece up to horizontal, you can rotate it 360° in the vertical position. Rotating gives you access to three sides of a clamped piece, even upside down! The main jaws pivot up to 5° for clamping tapered work, and the furnished auxiliary jaw will pivot up to 30°. Two dogs in each jaw allow clamping of round or irregular shapes. Jaws are 133/4" wide x 5" deep, maximum opening 12". Weight 55 lbs. Complete with wooden handle, mounting instructions and hardware.
GRÖZ Quick Release Vises
Close-grained grey cast iron means accurately machined housings for smooth sliding and true parallel action, free of side or cross movement. The steel main screw has buttress threads for smooth, accurate and responsive adjustment and the body and sliding jaw have provisions for attaching wooden liners. The adjustable front dog of special high-strength plastic protects your tools. 7" vise installs 21/4" below the bench surface, 9" and 101/2" vise installs 27/8" below the bench surface. 144844 7" width, 8" opening..................$109.99 144845 9" width, 14" opening................$146.99 147941 101/2" width, 15" opening..........$153.99
C
Cam Action On Front Jaw
Auxiliary Swivel Jaw
Tilts Up 90°
Rotates 360°
Extension Dogs Hold Rings and Awkward Shapes
Helping You Make Wood Work ®
47