DOWNLOAD MANUAL
621G 721G 821G 921G
Touchscreen
Wheel Loader
OPERATOR’S MANUAL
Part number 91822368
1st edition English July 2022
TRANSPOR T OPERA TIONS
6 WORKING OPERA TIONS
Preparing
1 - GENERAL INFORMA TION
Note the Owner
LEIL19WHL0126F A 1
Read this manual before you start the engine operate the machine. you need more information, contact your authorized dealer
This manual contains important information about the safe operation, adjustment, and maintenance your machine. Refer the index the back this manual for locating specific items about your The wheel loader forms current safety regulations the time its
Consult authorized dealer CNH Industrial modifications that can required for this machine comply with various country regulations and safety Unauthorized modifications will cause serious injury death. Anyone making such unauthorized modifications responsible for the consequences.
The information this manual provided the basis information that was available the time the manual was written. Settings, procedures, part numbers, software and other items can change. These changes can fect the maintenance performed the Ensure that you have complete and current information from your dealer before you start any machine
A TTENTION: the fuel system and engine your machine are designed and built government emissions T ampering and users strictly prohibited law Failure comply could result government rework invalid warranty , legal and possible confiscation the machine until rework original condition completed. Engine service and / repairs must done a certified technician only!
LEIL18WHL1387F A 2
NOT OPERA permit anyone operate service this machine until you the other persons have read and understand the safety , operation and maintenance instructions this manual. Use only trained operators who have demonstrated the ability operate and service this machine correctly and safely
This operator ’ s manual stored the manual compartment equipped this Make sure this manual complete and good Contact your authorized dealer obtain additional manuals manuals languages other than that the country
Y our dealer your disposal for any further will also provide any after - sales service you may require and genuine replacement your guarantee quality and
This manual contains information concerning the adjustment and maintenance your new Y have purchased a dependable but only proper care and operation can you expect receive the performance and long service built into this equipment. Please have all operators read this manual carefully and keep available for ready
Y our authorized dealer will instruct you the general operation your new Y our staf f tory - trained service technicians will glad answer any questions that may arise regarding the operation your
Y our authorized dealer carries a complete line genuine service These parts are manufactured and fully inspected ensure high quality and accurate fitting any necessary replacement prepared give your dealer the model and product identification number your new equipment when ordering parts. Locate these numbers now and record them below Refer the section this manual for the location the model and product identification numbers your
PLEASE RECORD THE FOLLOWING INFORMA TION
Model
Date Purchased
This the safety alert used with and without signal words alert you potential personal injury Obey all safety messages that follow this symbol avoid possible death injury .
W ARNING
A void injury and / machine damage!
Illustrations may show protective shielding open removed better illustrate a particular feature adjustment. Unless instructed otherwise, the machine should turned off and hazardous energies dissipated before you open any Replace all shields before you operate the Failure comply could result death serious injury . W1399A
IMPROVEMENTS
CNH Industrial continually striving improve its W e reserve the right make improvements changes when becomes practical and possible so, without incurring any obligation make changes additions the equipment sold previously
Intended use
This wheel loader , with standard equipment and attachments intended used for digging and general earth moving purposes such land truck and material
NOT use this machine for any application purpose other than those described this other product safety information provided with the These materials define the intended
Consult authorized dealer changes, additions modifications that can required for this machine comply with various applications and / country regulations and safety
Before permitting a new operator this machine, make certain:
• That the operator has received the necessary training operate the machine correctly and safely
• That the operator has read and understands the instructions given this manual.
All persons who will operating this machine shall possess a valid local vehicle operating permit and / other cable local age work permits.
• T ravel with a full bucket rolled - back and lowered much possible ensure maximum visibility , stability and safety a travelling machine. Operate the machine a speed adequate the working conditions the site and slow enough ensure complete control all
• not use the machine for another purpose than intended the manufacturer and outlined this
• not use the machine higher speeds than allowed the load and A wet surface other low adherence conditions may increase the braking distance result vehicle instability Adapt your traveling speed according the load the vehicle and the characteristics the road.
• Always check the conditions and carrying capacity bridges and ramps before driving over
• not use the machine without wearing the seat restraint system during activities where rollover tip - over hazards The ROPS cab ROPS structure will only fully fective when the driver remains attached the
• not use equipment mounted the machine which not correctly matching and firmly Such equipment may increase the risk rollover and hit the machine when coming
• not use the machine beyond its limits dynamic stability High abrupt maneuvers and fast and short cornering will increase the risk rollover .
• T ake the necessary precautions always aware the possible presence not work standers are within the range the operation the machine. Keep people away from the machine during work; bystanders must leave the working
• not allow riders the not allow people stand the access way step the cab when the machine Y our view the left - hand side will and a rider risks falling from the machine during unforeseen abrupt
• Always stay clear from implements operating area. When operating lift controls ensure bystanders are not near operating
• A machine has only one operator station and a one man operated vehicle. Other people are not allowed around the machine during normal
• The machine intended used under normal conditions for the applications described this the machine used for other purposes dangerous for example a flammable explosive special safety regulations must followed and the machine must equipped for use these
• The operator has determine whether additional noise exist due the characteristics the workplace, noise emissions from other machinery , the duration which require the use dedicated personal protective equipment hearing some specific operating conditions the the actual noise emission may dif ferent from the values determined using the noise level
Electro - Magnetic Compatibility (EMC)
This machine complies strictly with the European Regulations the electro - magnetic emissions. However , ence may arise a result add - equipment which may not necessarily meet the required such interference can result serious malfunction the unit and / create unsafe you must observe the ing:
• Ensure that each piece non - CASE CONSTRUCTION equipment fitted the machine bears the
• The maximum power emission equipment must not exceed the limits imposed the national authorities the country where you use the
• The electromagnetic field generated the add - system should not exceed 100 V / m any time and any location the proximity electronic
Failure comply with these rules will render the CASE CONSTRUCTION warranty null and void.
Manual scope and required training level
Introduction this manual
• Greasing
• Replacing consumable items such light bulbs
This manual gives information about the use your CASE CONSTRUCTION machine intended and under the conditions foreseen CASE CONSTRUCTION ing normal routine and
Periodic service, conversions, and repairs
Periodic service consists activities that are necessary maintain the expected life the CASE TION These activities have defined
This manual does not contain all the information that lates periodic and repairs that only trained service personnel can Some these activities may require appropriate technical skills, and / tools that CASE CONSTRUCTION does not supply with the
The manual contains the chapters shown the tents See the Index the end this manual locate specific items about your CASE CONSTRUCTION machine.
Normal operation
Normal operation consists the use this machine for the purpose CASE CONSTRUCTION intends operator that:
• familiar with the machine and any mounted ment towed equipment
T rained service personnel familiar with the machine acteristics must perform these activities the defined T rained service personnel must comply with the information periodic service and safe practices partly specified CASE CONSTRUCTION this ual and / other company
Periodic service includes:
• Oil change service for the hydraulic transmission
• Periodic exchange other substances components required
Conversion activities rebuild the CASE CONSTRUCTION machine a configuration that appropriate for a specific job site and / soil Conversion activities must done:
• Complies with the information operation and safe practices specified CASE CONSTRUCTION this manual and the signs the machine
Normal operation includes:
• Preparation and storage the machine
• trained service personnel familiar with the machine characteristics
• trained service personnel that comply with the information conversion partly specified CASE CONSTRUCTION this manual, assembly and / other company literature
• Connection and disconnection mounted equipment and / towed equipment
• Adjustment and configuration the machine and equipment for the specific conditions the job field, and / crop
• Movement components into and out working sitions
Routine service and maintenance
Routine service and maintenance consists the daily activities necessary maintain the proper machine The operator must:
• familiar with the machine characteristics
Repair activities restore proper function a CASE STRUCTION machine after a failure degradation Dismantling activities occur during the scrapping and / dismantling the machine.
T rained service personnel familiar with the machine acteristics must perform these activities. T rained service personnel must comply with the information for repair specified CASE CONSTRUCTION the service
Before you operate
Read this manual before you start the engine operate this CASE CONSTRUCTION Contact your CASE CONSTRUCTION dealer if:
• Comply with the information routine service and safe practices specified CASE CONSTRUCTION this manual and the signs the machine
Routine service can include:
• Fueling
• Cleaning
• W ashing
• T opping f fluid levels
• Y not understand any information this manual
• Y need more information
• Y need assistance
All persons training operate, who will operate this CASE CONSTRUCTION machine should old enough possess a valid local vehicle operating permit (or meet other applicable local age These persons
must demonstrate the ability operate and service the CASE CONSTRUCTION machine a correct and safe manner
Metric and imperial units
Frequency
(other than
ime
T orque (includes Bending moment, Moment force, and Moment a couple)
V elocity
V olume (includes Capacity)
V olume per time (includes Discharge and Flow rate)
Glossary
Acronym Definition
API American Petroleum Institute
ASTM American Society for T esting and Material
CCTV Closed - Circuit T elevision System European Community
CUC Clean Catalyst
DEF D IESEL E XHAUST F LUID (DEF) / A D B LUE ®
DIN
German Industrial Standard Institute
DOC Diesel Oxidation Catalyst
DPF Diesel Particulate Filter
DTC Diagnostic T rouble Code
ECU Electronic Control Unit
ECM Electronic Control Module European standard
EOL End Line
EST Electronic Service T ool
F AME Fatty Acid Methyl Ester
FMHL Follow Home Light
FMI Failure Mode Indicator
FOPS Falling Objects Protective Structures
FWD Front Wheel Drive
GWP Global W arming Potential
ISO International Standardization Organization
JSS Joystick Steering System
Load Center
LCD Liquid Crystal Display
LED Light Emitting Diode
LpA Sound pressure level the workplace
LwA
Sound pressure level the machine when stationary
MCM Manual Catalyst Management MSDS Material Safety Data Sheet
x Nitrogen Oxide
T Organic Acid T echnology
PCV Positive Crankcase V entilation
PIN Product Identifier Number
PPE Personal Protective Equipment
ppm Parts Per Million
ROPS Roll Over Protective Structures
RST Remote Service T ool
SAE Society Automotive Engineers (USA)
SCA Supplemental Coolant Additives
SCR Selective Catalytic Reduction
SCRoF Selective Catalytic Reduction Filter
SFB Smart Fuse Box Supply Module
TCU T ransmission Control Unit
TPMS T ire Pressure Monitoring System
UCM Universal Control Module
UDST Urea Dosing System T est
ULSD Ultra Low Sulfur Diesel
UQS Urea Quality Sensor
VGT V ariable Geometry T urbo
VIN V ehicle Identifier Number W aste Handler
Product identification
Model, serial number , and year manufacture
Record the machine and part identification When ordering obtaining information always supply your dealer with the type and serial number your machine Keep a record these numbers and your Manufacturer ’ s Statement Origin a safe the machine report the numbers your local law enforcement agency
Machine identification
Model name
PIN Model year
The Product identification number (PIN) plate located the right - hand side the
The identification plate includes the following main data the Logo
Machine model
Homologation code number the machine target foreseen
Machine serial number
Maximum total weight which the machine can bear
Maximum weight which the front axle can bear
Maximum weight which the rear axle can bear
This field not used since the machine not designed tow
Category the machine
Y ear manufacturing the machine 1 T otal weight the machine standard version
Engine power according standard ISO 14396
Y ear the model
Product identification plate (from January 2023)
Roll - Over Protective Structure (ROPS)
The serial number plate located inside the cab, under the operator ’ s seat the left - hand
Engine make and model
Engine serial number
The identification plates the engine (1) and (2) are cated the engine oil
The homologation plate (1) shows:
• Serial number
• Engine type
The identification plate (2) shows:
• Serial number
• Manufacturing date
• CNH part number
• FPT part number
LEIL16WHL1 167AB
LEIL19WHL0559AB
T ransmission
The serial number plate the transmission face
The serial number plate the axle cross member
LEIL16WHL0083AA
Axle
RCPH10WHL081AAH
manual storage the machine
The operator ’ s manual stored the cab.
READ THIS MANUAL
COMPLETEL Y and make certain you understand the All equipment has a Make sure you understand the speed, brakes, steering, stability and load characteristics this machine before you start
NOT remove this manual the safety manual from the
See your dealer for additional Keep the manual the storage compartment provided the The manual must available for use all
When you see this read your
When you see this symbol, refer your service manual.
Machine orientation
The terms right - left - and rear are used this manual indicate the sides they are seen from the seat.
Front
Right - hand
Rear
Left - hand
LEIL20WHL0178CA
Identification machine components
Roll Over Protection System (ROPS) cab
LEIL19WHL0126F A 1
Articulation soft stop
Cab door handle Bucket
T imed disconnect hood raise switch and battery jump post Loader lift arms
Battery access Bucket cylinder
Steps
LEIL18WHL1387F A 2
Pre - cleaner Handrail
Sliding access panel Windshield washer bottle
Cab side window T oolbox
Cab air filter door
Diesel Exhaust Fluid (DEF) / AdBlue® fill tank
Driving lights T ail light
LEIL17WHL2018FB 3
W aste Handler (WH) configuration
4
Windshield guard T ransmission guard
Driving light guard
Chassis side cover
Front articulation joint cover
Rear articulation joint cover
Fuel tank guard
Front chassis guard
Upper articulation cover
LEIL17WHL2017FB
Declaration Conformity
The following page provides a facsimile copy the “EC” Declaration Conformity . The Declaration Conformity the manufacturer ’ s declaration about machine compliance relevant Please keep the original document a safe Local authorities may require you show this document order assure compliance your
T ranslation this declaration your own country language provided the reverse page the original
For your better and easier understanding the document hereafter find some explanatory code
Under section are listed those options variants which have safety related Some them are standard provided, like FOPS ROPS.
Under section 2 are listed all information required
Directive 2000 / / Please refer your own original Declaration Conformity for specific machine information.
Generic serial number for this machine Sequence letters and numbers may vary depending machine
Declaration Conformity serial number Please make reference this number when requiring information support about
Signature a person authorized sign the document behalf the company
LEIL21WHL0792H 1
Specifically for UKCA
2 - SAFETY INFORMA TION
Safety rules and signal word definitions
Personal safety
This the safety alert used alert you potential personal injury
Obey all safety messages that follow this symbol avoid possible death injury
Throughout this manual you will find the signal words W and CAUTION followed special These precautions are intended for the personal safety you and those working with
Read and understand all the safety messages this manual before you operate service the
DANGER indicates a hazardous situation not will result death serious injury
W ARNING indicates a hazardous situation not could result death serious injury
CAUTION indicates a hazardous situation not could result minor moderate injury
Machine safety
NOTICE: Notice indicates a situation not could result machine property
Throughout this manual you will find the signal word Notice followed special instructions prevent machine property The word Notice used address practices not related personal safety
Information
NOTE: Note indicates additional information that clarifies steps, other information this
Throughout this manual you will find the word Note followed additional information about a other information the manual. The word Note not intended address personal safety property damage.
Personal safety
Most accidents involving machine operation and maintenance can avoided following basic safety rules and Read and understand all the safety messages this the safety and the safety signs the machine before you operate service the See your dealer you have any
READ THIS MANUAL
COMPLETEL Y and make sure you understand the All equipment has a Make sure you understand the stability , and load characteristics the machine before you start operate this machine.
NOT remove this manual the safety manual from the See your dealer for additional Also see the manual information the title pages (first and second pages front the T able Contents) this manual.
The safety information given this manual does not replace safety insurance local laws. Make sure that your machine has the correct equipment according these rules laws.
Additional safety messages are used the text the manual show specific safety
NOTICE: the safety messages this chapter point out conditions which can happen during the normal operation and maintenance your machine. These safety messages also give possible ways dealing with these conditions.