Hat with Hidden Camera Quick Start Guide Last Modified on 12/20/2015 11:40 pm EST
Hat with Hidden Camera Quick start guide
To Charge the Camera 1. 2. 3. 4.
Make sure the On-Off switch is in the Off position. Plug in the mini USB cable to the hat, and plug in the other end into the computer. The green LED next to the light will turn on to show that the camera is charging. When the camera is finished charging, the green light will turn off.
Operating the Camera 1. To use the camera, first, slide the On-Off switch to the On position. 2. On the remote, press and hold the power button to put the unit into stand-by mode. You will feel a vibration in the hat, and the green light will stay on. 3. Press and hold the button on the remote for about one second. You should feel the hat give 5-6 short vibrations and the light will flash 5-6 times, then turn off. 4. To stop recording, press the button on the remote and hold it for about one second. You should feel the hat give 2-3 short vibrations and the light will blink 2-3 times. This means the video is being recorded on internal memory. 5. If you do not begin recording within 10 seconds of putting the hat in stand-by mode,