Issuu on Google+

Solutions for the service sector 2013-2014 Edition

MADE IN FRANCE


Solutions for energy optimisation in the service and manufacturing sectors. EXPERTISE... acquired over the last 60 years in designing and building systems for producing domestic hot water (DHW), Low Temperature Hot Water (LTHW), as well as in Chilled Water storage for the service and manufacturing sectors.

AN EXTENSIVE RANGE TO MEET ALL REQUIREMENTS • Energy production and storage systems tailored to meet even the most demanding requirements thanks to powerful design tools. • A large range of standardised products available in stock.

2


MADE IN F R A N C E

A MULTI-INDUSTRY APPROACH FOR A GLOBAL SOLUTION From the manufacture of storage tanks through to the creation of innovative hot water production systems, LACAZE ENERGIES has successfully anticipated market growth by establishing itself as a leading creator of energy storage solutions. Developed as complete systems, each of our products integrates the best combination of components and materials to ensure 100% satisfaction in terms of performance, costeffectiveness and reliability. It was this mentality that led to the creation of the Solar agency - an entity in its own right dedicated to the development of complete solar thermal installations (expertise, advice, sizing, help with commissioning the installation, etc.).

INNOVATION IS AT THE HEART OF OUR BUSINESS... by dedicating nearly 7% of our annual turnover to Research and Development. LACAZE ENERGIES continues to develop and offer the most efficient materials in line with market demands, new thermal regulations (such as the RT2012) and environmental issues (optimisation of the production and consumption of hot water, technological developments linked to renewable energies, etc.).

3


THE EXPERTISE OF A SPECIALIST in hydraulics, heat science, boiler making, robotics, plastics manufacturing and electricity used throughout our equipment’s manufacturing process.

RESOURCES AUTOMATED PRODUCTION EQUIPMENT designed for manufacturing standard and made-to-measure products. In 2012, a new welding machine was introduced at the same time as the new range of DUPLEX «DPX» stainless steel DHW cylinders, as well as the production of all cylinders in stainless steel.

EXCEPTIONAL LOGISTICS MANAGEMENT • Integrated Logistics Department (for all products of any size). • Express delivery in the best conditions, even for large capacities. • Equipment unloading service (on request /depending on capacity).

A MATERIALS ANALYSIS LABORATORY

A SALES SUPPORT NETWORK to fulfil your quality and service requirements. The promise of an efficient countrywide network.

4


OUR PROMISES TO DETERMINE YOUR NEEDS AND MEET YOUR EXPECTATIONS • Specific advice and information, technical product information. • Quick quotation turnaround time.

TO OFFER YOU CUSTOMISED SOLUTIONS... Thanks to our versatile and efficient design and manufacturing tools for standard and bespoke products enabling us to meet a client’s individual specifications.

TO PROVIDE YOU WITH CONSTANT QUALITY Evolving is also about being able to listen. As a result, LACAZE ENERGIES pays special attention to every expressed need, from the receipt of the specifications to the maintenance of the equipment. With a Quality Policy shared by all our employees and based on an on-going commitment to improve processes, products and services, we place your satisfaction at the very heart of everything that we do.

5


new

products

TRANSECO

e-LESS®

ENERGY RECOVERY from the flue gases

CONTROL AND MONITORING SYSTEMS

• Compact and vertical device made from 304 L stainless steel. •C  alorific power of up to 900 kW. •C  an be combined with Hydrogaz® tanks (domestic hot water, pages 98 and 188), industrial pre-mix burners (I.P.B.-I.C.T, for more information consult the Manufacturing Sector catalogue) or boilers (heating hot water, page 218). • Suitable for new or existing installations. • Service or manufacturing sector applications. • High efficiency obtained - up to 109% on NCV.

6

for DHW and LHTW production and storage installations

• All production methods: Accumulation / instantaneous / semi-instantaneous. • All types of energy: Gas / Electricity / Solar / Heat pump / Combined energies. • Improved energy performance and savings (monitoring and managing the installation). • Anti-legionella protection via thermal shocks. • Automation. • Stand-alone and versatile. • Remote access using a PC, Smartphone or digital tablet.

Page 30


DPX

COIL TANKS

DUPLEX STAINLESS STEEL CYLINDERS

Production and storage of hot water (domestic purposes or heating)

• DUPLEX stainless steel cylinder (high-tech austenitic-ferritic stainless steel). • Production and storage of domestic hot water (DHW). • 300 to 3,000 litres capacity tanks available. • Service or manufacturing sector applications. • Exceptional anti-legionella treatment resistance. • Excellent resistance to corrosion. • Enhanced mechanical performance. • Economical and high-performance solution. • 7-year tank warranty. • Discover the various models of the new DUPLEX ”DPX” stainless steel cylinder by consulting the main menu.

• Tanks made from: - DUPLEX STAINLESS STEEL ("DPX" range); - "RC" coated carbon steel ("PREFERENCE" range); - Enamelled steel ("GLASS LINED" range). • 300 to 3,000 litres capacity tanks available. • Service or manufacturing sector applications. •C  oil tanks with a large heat exchange surface for accelerated water heating. •E  conomical and high-performance solution. •M  ulti-purpose: Heating from multiple heat sources or types of energies (conventional or renewable), simultaneous feeding of several consumer circuits.

7


RESIDENTIAL AND INDUSTRIAL SOLAR SOLUTIONS For many years, LACAZE ENERGIES has been investing in the development of technologies linked to renewable energies and in particular the design of a range of tried and tested solar water heaters. It has further developed its expertise in relation to residential solar thermal energy and today is now able to provide end-to-end solutions thanks to: - The provision of all materials required for installation. The necessary backup is provided by other energies that we have been mastering for a long time (electricity, primary hot water, gas or biogas, combined energy solutions); - Its engineering expertise and tailored support/services.

SOLAR ENERGY - NATURAL AND ECONOMICAL With the implementation of new regulations, the government is supporting the development of heat p ro d u ce d f ro m s o l a r t h e r m a l e n e rg y w h i c h re p re s e n t s a f re e a n d limitless source of energy emitting no greenhouse gases. Promoted by t h e A D E M E a n d lo c a l authorities, domestic solar hot water has shown significant year on year growth in France and has resulted in a reduction in energy costs today and for the next 20 years.

8


OUR PHILOSOPHY

To offer high-performance equipment that meets energy-saving requirements.

OUR EXPERIENCE

To develop and implement turnkey solar projects for the service, manufacturing and residential sectors.

OUR PROMISE

To reduce operating costs and therefore your energy bills by using new, modern and clean energy resources. Ask for our «Solar thermal systems» catalogue. 2013 -2014 Edition

A COMPREHENSIVE SOLAR THERMAL RANGE Recurrent price increases for traditional energies have encouraged us to offer new energy solutions and to increase the value of your goods and processes. Our first-rate European solar solutions are designed for use in residential, service sector and industrial environments. They meet the needs of design consultants and climate engineering businesses looking for a comprehensive solution and they also benefit from an extended warranty period. Researched and approved by our R&D department, they are guaranteed to offer quality, reliability and durability.

BUILDING YOUR PROJECT TOGETHER With LACAZE ENERGIES, your projects will meet the requirements of the new 2012 thermal regulations and the «Grenelle Environnement». Do not hesitate to contact one of our advisors located throughout France and Belgium to benefit from a study that is tailor-made to your geographical location and the space available for the installation.

9


LACAZE ENERGIES’ ASSETS Solar Products using solar thermal energy or designed for this use.

Outdoor version The device can be installed outdoors (weather-proof thermal insulation).

Tanks • The tanks are designed and manufactured based on CODAP regulations and more than 60 years of experience in the tank manufacturing industry. • Potential provision of design calculations (optional extra). •D  esign complies with the recommendations of the Directorate-General for Health with regards to the prevention of Legionella-related risks.

CE compliance • 97/23: Pressure Equipment Directive • 73/23: Low Voltage Directive • 89/336: Electromagnetic Compatibility • EN676: automatic forced draught gas burner standards • CE markings: - Certigaz marking (Hydrogaz®*). - E0694 body. * except 120 and 140 kW.

Optimised connections • A single multi-use tank: position, number, size and dimensions designed for solar and conventional uses, in a series or parallel assembly, looped, etc. •D  ual cold water inlet with deflector (right/left): easy to install. •C  old water deflector without reduction of diameter: - Less disturbance; - Better maintenance of stratification; - Low head loss.

Electric immersion heater with integrated power contactor (Power ≤ 20 kW) Three-phase 30 A-400 V safety/ regulation control box fitted to the top of the immersion heater with cable-connected components: - Double safety thermostat; - Power contactor. For maximum reliability and durability, and unlike more commonly used technologies, the power cut is not provided directly by the thermostat’s switches.

10

Fire-rated thermal insulation M1 (Euroclasses) or M0 (Euroclasses A2) fire-rated insulation jackets that do not require special preparation of premises (according to the directives of 20/11/2000 and 22/11/2004 relating to fire safety regulations in buildings open the public).

Inspection manhole • Compliant with recommendations of the DGS [Directorate-General for Health]. • Scalable equipment in accordance with needs (power adjustment, change of energy). • Tank inspection and cleaning possible. Note: ø 250 mm inspection nozzle on 300 litres capacity tank, ø 500 mm inspection manhole for RC and SS tanks over 4,000L

High resistance tubular heaters • AISI 316 stainless steel bundle. • Improved resistance to corrosion compared to the 304 L. • Better compatibility with environments containing chlorines (anti-legionella treatments for example).


Reinforced thermal insulation RT2005-compliant thermal insulation performance. Surface thermal resistance (m2.k) / W Conventional Lacaze Energies insulation insulation Foam 40 mm 1,43 2,00 Rockwool 60 mm 1,50 1,88 Rockwool 100 mm 2,50 3,12

RC

Component eligible for use in installations that must meet RT2012 requirements.

Cylinder with "RC" coated carbon steel tank The internal "RC" coating, the result of extensive research (R&D department, testing laboratory), is now a feature of all "PREFERENCE" series tanks. This new internal protection, developed to meet strict specifications, is the result of a technological collaboration with the best European specialists in the field. It offers the following benefits: •A  ttestation de Conformité Sanitaire [Sanitary Conformity Certification] (ACS); • WRAS approved material BS6920-01(Approval Number 1005531 • Strong adhesion (semi-thick flexible coating 400 μ). • No grip for organic compounds (bio-film, scale): smooth and shiny appearance; • Good chemical and thermal resistance (85°C constant); • Less sensitive to shocks than rigid coatings (such as plasticized cement). There are four different types of "RC" coating available depending on capacity and temperature restrictions: Type of coating Capacity T-max Duration of T-max

RC701(1) 8 to 110 m3 70°C Constant

RC851 0,3 to 6 m3 85°C Constant

RC901(1) 8 to 110 m3 90°C Constant

RC951 0,3 to 6 m3 95°C Peak

Discover the full range of models designed for use in industrial environments in our Manufacturing Sector catalogue.

(1)

Magnesium protection anode : Advantages over classic anodes. • Greater protection: significant surface area; • Extended lifespan: greater magnesium content. Classic anode Capacity 300 to 500 L 750 to 6 000 L

Diameter (mm) 22 26

Lenght (mm)

Mass Mg - g

350 400

232 370

Lacaze Energies anode(2) Diameter Lenght (mm) Mass Mg - g (mm) 32 500 700 32 700 980

Note : Our 0.3 to 3 m3 capacity tanks feature one anode and our 4 to 6 m3 capacity tanks feature two anodes.

(2)

• Wear inspection possible without removing the anode or draining the cylinder. • Specific plug on the tank enabling good grounding of the anode (more efficient than via a screw thread). • Reduced maintenance costs.

GL

DPX

New range of "GLASS LINED" cylinders made from enamelled steel • High performance enamelled steel: increased resistance to chemical cleaning agents and very high working temperature (99°C). • Domestic hot water storage. • Production of domestic hot water via coil-wound heat exchangers. • Multi-purpose operation: they integrate perfectly into solar installations and can be connected to boilers, heat pumps, etc. • Increased protection against corrosion (magnesium anodes supplied).

New “DPX” DUPLEX stainless steel tank • Stainless steel DUPLEX 100% recyclable • Equipment compliant with food standards: suitable for contact with domestic water and compliant with DGS [Directorate-General for Health] recommendations. • Exceptional resistance to corrosion: particularly in the case of chlorinated treatments used to combat legionella. • The mechanical performance of duplex tanks is superior to those of conventional stainless steel: - Lighter cylinder; - Easy to handle. • Less maintenance: no protection anode required. • No internal coating that is likely to degrade or peel away: - Food safety characteristics preserved over time; - Water storage possible at a constant temperature of 95°C (solar or industrial applications); - No risk of obstruction to the control and safety devices. • 7-year tank warranty.

11


SOLAR HOT WATER

p 16

CENTRALISED HOT WATER AND ENERGY MANAGEMENT

p 30

POWER, PROTECTION AND REGULATION BOX

p 38

DHW CYLINDER

RC851

0,3 to 6 m3

DHW CYLINDER

316 L stainless steel

DHW HEAT EXCHANGER SYSTEM

316 L stainless steel

Backup immersion heater

Immersion heater

Cartridges

0,3 to 3 m3

p 44

SOLAR DHW CYLINDER

RC851

0,3 to 3 m3

p 48

p 48*

SOLAR DHW CYLINDER

RC951

0,3 to 3 m3

p 48

p 48*

Duplex stainless 0,3 to 3 m3 steel

p 48

p 48*

SOLAR DHW CYLINDER SOLAR DHW CYLINDER

316 L stainless steel

0,3 to 3 m3

p 48

p 48*

SOLAR DHW CYLINDER

Enamelled steel 0,3 to 3 m3

p 48

p 48*

p 108

p 108*

DHW HEAT EXCHANGER SYSTEM DHW CYLINDER

Carbon steel

DHW CYLINDER

0,3 to 4 m3

316 L stainless steel RC851

p 124 0,3 to 6 m3

p 162

p 128

p 170 p 170 p 128*

Duplex stainless 0,3 to 3 m3 steel

p 162

p 128

p 170 p 170 p 128*

p 162

p 128

p 170 p 170 p 128*

p 128

p 128*

DHW CYLINDER

316 L stainless steeel

DHW CYLINDER

Enamelled steel

DHW GENERATOR

Enamelled steel

LOOP HEATER

316 L stainless

HEATING HOT WATER CYLINDER

Carbon steel

0,3 to 3 m3

0,22 to 0,4 m3 p 214 0,75 to 3 m3

SKID-MOUNTED SUBSTATION

PRIMARY WATER

PLATE HEAT EXCHANGER STORAGE

Duplex stainless 0,3 to 3 m3 steel

DHW CYLINDER

SOLAR HEATING HOT WATER CYLINDER

DOMESTIC HOT WATER

Capacity

Managing and optimizing of energy

RECOVERING ENERGY FROM FLUE GASES

Type of tank/coating

MANAGING AND OPTIMISING OF ENERGY

CONTENTS

ÉLECTRIC

p 222

p 222

p 222 p 222

p 222

CHILLED WATER CYLINDER

Carbon steel

0,3 to 3 m3

p 230

p 230

HEATING HOT WATER CYLINDER

Carbon steel

0,3 to 3 m3

p 234

p 234

ELECTRIC BOILER

Carbon steel

MAGNETIC FILTER

316 L stainless steel

LOOP HEATER

Carbon steel

p 246 p 252 p 256

The cylinders’ diagonals for installation : p 259 / Online shop : p 260 / Commercial network : p 261 /

12


VERSIONS/HEATING METHOD

Coil heat exchangers: solar + primary backup

Heaters: solar + primary backup

Solar heater + gas backup

Electric immersion heater + heater

DUAL-ENERGY SOURCE Heat pump

Solar

COIL

Primary

Heat pump

Solar

Domestic water

GAS

Primary water

TUBULAR HEATER

p 22

MANAGING AND OPTIMISING OF ENERGY

p 22

p 22

p 78

p 78

p 98

p 78

p 78

p 78

p 98

p 78

p 78

p 78

p 60

p 98

p 78

p 60

p 78

p 78

p 60

p 98

p 78

p 60

SOLAR HOT WATER

p 60

p 60

p 114

p 114

p 200 p 184

DOMESTIC HOT WATER

p 192

p 200 p 184

p 140

p 140

p 192

p 200 p 184

p 140

p 140

p 192

p 140

p 140

PRIMARY WATER

p 212

p 218 p 222 p 222

p 222

p 222

p 222

p 222

p 222

p 222

p 238

p 238

p 222

p 222

p 222

p 222

p 238

*The immersion heater

backup is available on all models of cylinder featured in this catagoque.

Cahors Group presentation : p 262 / Reference index : p 264

13


14


1

MANAGING AND OPTIMISING OF ENERGY TRANSECO. .................................................................................................. 16|21 Recovering energy from flue gases - 30 to 900 kW

“RECUPAC” DHW cylinder......................................................... 22|29 Recovering energy from heat pumps - 500 to 6,000 litres "PREFERENCE” range "DPX" Duplex stainless steel range

e-LESS®..........................................................................................................30|37 Centralised management of hot water and energy

POWER, PROTECTION & REGULATION BOXES

...........................

38|41

15


TRANSECO RECOVERING ENERGY FROM FLUE GASES 30 to  900

kW

With the TRANSECO it’s possible to recover energy contained in combustion products emitted by generators using gaseous fuels. This condenser can also be combined with Hydrogaz® systems (for domestic hot water) as well as boilers (Low Temperature Hot Water),and is suitable for new or existing installations in the service or manufacturing sectors. Thanks to the recovery of sensible heat (reducing flue gases temperature) and latent heat (condensing water flue gases contained within combustion products), the efficiency obtained can reach 109% on NCV, depending on the return temperature of the water in the system.

ADvantages • Multi-purpose : can be combined with a Hydrogaz® domestic hot water system, industrial pre-mix burners and boilers. • Reduced operating costs : efficiency of up to109% on NCV. • Rapid return on investment : significant savings. • Excellent resistance to corrosion : the sections in contact with water and flue gases are made from stainless steel. • Service pressure of 7 bar as standard. • Can be installed outdoors : weather and UV resistant shell. • Quick and easy to maintain : tubes can be cleaned without disassembling the piping or isolating them. • Removable base for wall mounting.

16


MANAGING AND OPTMISING OF ENERGY

VERSIONS AVAILABLE The TRANSECO is available in 4 models, with calorific values from 30 to 900 kW.

OPERATING PRINCIPLE The TRANSECO employs the principle of counter-flow exchange between the flue gases and the water, with the two circuits being separated by a wall of finned tubes. The flue gases emitted by the burner enter the top part of the device, descend and transfer their heat to the water flowing in the opposite direction, inside the finned tubes. The combustion products move in the same direction as the condensation and as they travel they meet a colder wall which encourages the condensation process.

1

 imultaneous control of the burner S and circulator

2

Circulator

3

 old water inlet or outlet for the C exchanger

4

Return in the cylinder

5

Chimney

1

5 4

1 3 Gas burner

Cold water

2

The circulator 2 which is controlled by the operation of the burner, recovers the energy, even in the absence of water withdrawal (period following a peak in hot water consumption with a Hydrogaz速 system).

17


SPECIFICATION

Outdoor version

Main body

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

- 304 L Stainless steel vertical cylinder (on steam and water side). - Maximum service pressure: 7 bar (on water side). - Access hatch for cleaning the finned tubes. - Base made of galvanised metal sheet, compatible with pallet trucks and removable for wall mounting. - Hoisting ring for lifting and 360° rotation. - T-max. (on water side): 95°C - T-max. for flue gases: 250°C. - Condensates removed by a 316 L stainless steel siphon. - 316 L stainless steel watertight vapour duct and flue.

Thermal insulation - Insulation: 50 mm rockwool with M0 fire rating. - Shell : pre-lacquered sheet metal finish (anti-corrosion paint). - Can be partially dismantled without disconnecting the piping for access to the cleaning trap.

Optional extras - Boiler fitting kit: connection between TRANSECO and Hydrogaz®. - Circulator kit: circulator (230 V - 220 W) + control and protection device. - Hydraulic kit: valve + tee fitting + reducers + safety valve calibrated at 7 bar. - Various colours available on request. - Hoisting ring.

Warranties (in accordance with our general conditions of sale) Main body = 5 ans Accessories = 1 an

MODELS AVAILABLE References TRA0100 TRA0200

Power (kW) Minimum Maximum 30 100 90 200

Note: Discover the TRA0500 and TRA0900 models in our Manufacturing Sector catalogue (calorific power of 500 and 900 kW respectively).

OPTIONAL EXTRAS Reference TRAKH TRAKC TRAKF150 TRAKF200

18

Description Hydraulic kit Circulator kit Cylinder vapour kit for TRA0100 Cylinder vapour kit for TRA0200


MANAGING AND OPTMISING OF ENERGY

PERFORMANCE DATA 110

Efficiency on NCV (Net Calorific Value)* of the TRANSECO-generator unit depending on the water temperature.

108 106

*Data given for information purposes.

104

Conditions

102

- Natural gas - 93% boiler efficiency - 20% excess air - Temperature of incoming flue gases 160°C. - Nominal water flow

100

Efficiency on NCV %

98 96

1

94 92

10

20

40

30

50

Water return temperature °C Minimum recovery Without TRANSECO

Maximum recovery

HEAD LOSS

BIP 03s

Calorific power (kW) 34

BIP 06s

64

BIP 12

127

Reference

IPB*

TRA0100

TRA0200

Hydrogaz® TRG 32 TRG 51 TRG 60 TRG 90 TRG 120 TRG 140

Calorific power (kW) 34 54 63 95 133 150

Water flow rate (m3/hr) 1 1 1 1 2 2

*IPB: Industrial pre-mix burner.

Head loss in relation to flue gases (T -°C 200°C and 20% excess air)

Head loss in relation to water 6

6,0 5,41

5

5,0 4,38

4

4,0 3,47

3

3,0 2,66

2,0

1,95

1,44

1,36 1 0,49 0,06 0

0,22

0,16 2

0,87 0,29

0,45

1,14 0,64

4

0,87

6

Flow rate in m3/hr TRA0100

Head loss in mm CE

Head loss in m CE

2

TRA0200

8

10

1,0

0

20

40

60

80

100

120

140

160

180

200

Boiler power in kW TRA0100

TRA0200

19


HEAD LOSS CORRECTION IN RELATION TO FLUE GASES For flue gases or excess air temperatures that are different to the reference values, the head loss values are obtained by multiplying the value on the diagram (page 19), by the corrective coefficients determined using the graphs hereafter.

Example • 150 kW burner with a vapour temperature of 150°C and excess air of 20%. • TRANSECO designed for this boiler: TRA0200. • Head loss in relation to flue gases of 220°C: 3 mm WC (see the previous diagram “Head loss in relation to flue gases - T° 220°C”). • On the “Corrective coefficient according to vapour temperature” graph: C1 = 0.75 for 150°C. • On the “Corrective coefficient according to excess air” graph: C2 = 1 for 20%. • Head loss: 0.8 x 0.75 x 1 = 1,8 mm WC.

Corrective coefficient according to vapour temperature

Corrective coefficient according to excess air

1,15

1,3

1,1 1,05

1,2

1 0,95

1,1

0,9 0,85 1

Coefficient correctif 2

Corrective coefficient 1

0,8 0,75 0,7 0,65 0,6

100

150

200

250

Vapour temperature (°C)

0,9

0,8

10 Excès d’air

RETURN ON INVESTMENT Example 2-bedroomed houses Consumption of 15 m3 per day at 60°C for 365 days of the year; Which is a 140 kW burner operating for around 6.2 hrs per day. With an average efficiency of 92% on NCV: Energy consumed: 346,055 kWh per year. Annual cost: €17,995 per year (based on €0.052/kWh). With an efficiency of 106% on NCV: Annual cost: €15,618 per year (based on €0.052 /kWh). Saving: €2,377 per year.. TRA0200 recovery unit + connection kit + circulator ~ €6,077 excl. VAT. A return on investment is achieved in around 2.6 years.

20

20

30

40


Se

394

Fe

536

196

169

268

TH C Fe

Condensate outlett

Ee Water inlet Fe Flue gases inlet Fs Flue gases outlet Se Water outlet

2002

2150

TH Thermostat sleeve

1808

25

C

MANAGING AND OPTMISING OF ENERGY

GENERAL DIMENSIONS

1

Fs Fs

431

Ee

256

332

Ee

178

178

167

398

750

167

870

Connector diameter

Weight Connector diameter

Type of connection Fe

- Flue gases inlet

200 mm

Fs

- Flue gases outlet

150 mm

Ee

- Water inlet

DN40

Se

- Water outlet

DN40

C

- Condensate outlet

DN20

TH

- Thermostat sleeve

DN15

Models TRA0100 TRA0200

Weight (kg) 162 170

Boiler fitting kit 130

1400

A

580

0째

10

Axis R

A

Adjustable element from 300 mm to 450 mm

Axis R Possible to rotate in relation to this axis

21


“RECUPAC” DOMESTIC HOT WATER CYLINDER ENERGY RECOVERY VIA A HEAT PUMP 500 to  6, 000

The “RECUPAC” is a cost-effective solution for producing and storing DHW from energy recovered by a heat pump. Thanks to heat extracted from the air or the ground it is possible, via a tubular heater, to store sufficiently large quantities of hot water to meet the needs of the service or residential sectors. If necessary, a backup system can be used to provide additional energy.

Based on the CODAP, the “RECUPAC” also fulfils the requirements of the EN13445 standard.

22

Litres


• Production of DHW via any kind of heat pump. • Less heat pump operating cycles. • Reduced operating costs (energy savings of up to 60%). • Reduced greenhouse gas emissions. • DHW temperature stability. • Significant volume of hot water means that peaks in demand are met.

• Multi-purpose: can be integrated into new or existing installations. • Delivered to site with pre-assembled insulation and thermal equipment. • Non-standard versions are available on request.

MANAGING AND OPTMISING OF ENERGY

ADVANTAGES

1

OPERATING PRINCIPLE

5

1

Cold water inlet

2

Non-return valve

3

Safety valve

4

Electrical backup

5

Degasser

6

Loop pump

7

Magnesium anode

8

U-tube heater

9

Circulator

10 Heat pump 11 Drainage

6 4 7

10

3

2

8

9 PAC

1

11

23


“PREFERENCE” range SPECIFICATION

RC Optimised connections

Tank

CE compliance • 97/23: pressure equipment • 73/23: low voltage • 89/336: electromagnetic compatibility

Cylinder with "RC" coated carbon steel tank

Reinforced thermal insulation

• Vertical carbon steel tank with 3 feet. • 500 to 6,000 litres capacity. • Maximum service pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manhole.

Note: Compliant with the recommendations of the Directorate-General for Health

Internal coating (WRAS) • Finished with “RC851” coating. • T-max = 85°C constant. • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint.

Removable thermal insulation

(even on the inspection manhole and on the bottom) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ= 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Tubular heater • Removable tubular heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Class B heater, compliant with article 16.9 of the health regulations.

Options • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air drain valve). • Other thicknesses of insulation. • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years • Tubular heater = 5 years. • Other workstations = 1 year.

24

Inspection manhole

High resistance tubular heaters


MANAGING AND OPTMISING OF ENERGY

DIMENSIONS øD

EC

TM TT

DA

AN1

AN1 Screw-on nozzle 40/49

AN2

AN2 Screw-on nozzle 40/49

for anode

for 2nd anode

EF Cold water inlet RE

EC Hot water outlet

H

DA

1

DA Outlet/loop return PI Support feet J

TT

G2

EF

RE Heat pump heater TH Manhole with an internal

G1

diameter of 400 mm*

F

TM Nozzles for thermometer

(or PT100 probe)

B

E

C

TT Nozzles for thermostat EF

VM DN50 drainage

PI

A

* 500 mm for tanks over 4,000L VM

180°

EC VM

Capacity (litres)

DA EF TT

EF DA

90°

270°

AN1 AN2 RE TH TM 315° 0°

500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

TM - TT (G-int. thread) DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

DA - VM (G-ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

EC* - EF (G-int. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

Weight (kg) 140 175 210 235 280 290 345 400 430 470 680 790 890

*EC nozzle for plate flange from 5 000 L to 6 000 L.

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

A (mm) 90 90 90 90 90 90 90 90 90 90 110 110 110

B (mm) 410 440 440 475 475 510 510 560 560 560 630 630 630

C (mm) 560 590 590 650 650 685 685 745 745 745 855 855 855

øD (mm) 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300 1 500 1 500 1 500

E (mm) 660 690 690 725 725 760 760 810 810 810 860 860 860

F (mm) 860 890 890 925 925 960 960 1 010 1 010 1 010 1 060 1 060 1 060

G1 (mm) G2 (mm) 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450 1 530 1 780 1 880 2 130 2 160 2 410

H (mm) 1 820 1 880 2 430 1 960 2 510 2 020 2 570 2 110 2 350 2 660 2 790 3 490 3 990

J (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120 2 185 2 805 3 305

Note : H = High version ; B = Low version.

(1)

25


TECHNICAL SPECIFICATIONS Heat pump heater Primary system (Glycol water 30%) 55/47,5°C - Secondary 10/45°C Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

Heat pump heater Power (kW) Nozzle E/S 18 DN32 35 DN65 35 DN65 35 DN65 35 DN65 40 DN65 45 DN65 45 DN65 50 DN65 50 DN65 60 DN65 60 DN65 60 DN65

Flow rate m3/hr 3,5 4,5 4,5 4,5 4,5 5,1 5,8 5,8 6,3 6,3 7,7 7,7 7,7

Head loss (mH2O)(2) 0,6 0,2 0,2 0,2 0,2 0,3 0,4 0,4 0,4 0,4 0,7 0,7 0,7

Surface area (m2) 1,72 4,1 4,1 4,1 4,1 4 4,5 4,56 5,1 5,1 5,9 5,9 5,9

Note : H = High version ; B = Low version. mH20 = Meter of water column

(1) (2)

MODELS AVAILABLE Capacity Standard model comes with a 100 mm-M1 (litres) 500 PRC050M11V 750 PRC075M11V 1 000H(1) PRC100M11HV 1 000B(1) PRC100M11BV 1 500H(1) PRC150M11HV 1 500B(1) PRC150M11BV 2 000H(1) PRC200M11HV 2 000B(1) PRC200M11BV 2 500 PRC250M11V 3 000 PRC300M11V 4 000 PRC400M11V 5 000 PRC500M11V 6 000 PRC600M11V

Cooling constant (Wh/day.K.L) 0.060 0.049 0.046 0,042 0,039 0.037 0,034 0.032 0.031 0.030 0.026 0.025 0.024

Standard model comes with a 100 mm-M0 PRC050M01V PRC075M01V PRC100M01HV PRC100M01BV PRC150M01HV PRC150M01BV PRC200M01HV PRC200M01BV PRC250M01V PRC300M01V PRC400M01V PRC500M01V PRC600M01V

Cooling constant (Wh/day.K.L) 0.072 0.058 0.054 0,050 0,046 0.044 0,041 0.038 0.036 0.035 0,030 0,029 0,028

Note : H = High version ; B = Low version.

(1)

OPTIONs Reference KA1

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass stainless steel thermometer with dial 0/120°C - DN50 drainage valve - Air drain valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

26


SPECIFICATION

DPX Optimised connections

DUPLEX stainless steel

CE compliance

• 97/23 : pressure equipment • 73/23 : low voltage • 89/336 : electromagnetic compatibility

Tank

Reinforced thermal insulation

Inspection manhole

High resistance tubular heaters

MANAGING AND OPTMISING OF ENERGY

“DPX” DUPLEX STAINLESS STEEL range

1

• Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum service pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manhole. • T-max = 95°C constant. Note : Compliant with the recommendations of the DirectorateGeneral for Health.

(1)

Removable thermal insulation

(even on the inspection manhole and on the bottom) M1 fire rated : • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated : • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Tubular heater • Removable tubular heater with bundle made from 316 L stainless steel, fixed onto the inspection manhole. • Class B heater, compliant with article 16.9 of the health regulations.

Options • Tank made from AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air drain valve).

Warranties

(in accordance with our general conditions of sale) • Tank = 7 ans. • Tubular heater = 5 years. • Other workstations = 1 year.

27


Dimensions øD

EC

DA

TT

TM TH RE H

DA

EF

L

EF Cold water inlet J

K

TT

EC Hot water outlet

G

DA Outlet/loop return E’

PI Support feet

E

F

RE Heat pump heater TH Manhole with an internal

diameter of 400 mm

B

EF

TM Nozzles for thermometer TT Nozzles for thermostat A

(or PT100 probe)

PI

VM DN50 drainage

VM

270°

EC VM

RE

EF DA

DA EF TM TT

180°

Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

90°

Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

28

TM-TT (G-int. thread) DN15 DN15 DN15 DN15 DN15 DN15 DN15

EC-EF-DA-VM Weight (G-ext. thread) (kg) DN50 DN50 DN50 DN50 DN50 DN50 DN50

Weight with heater (kg

90 110 135 180 265 315 335

115 135 160 185 235 320 370

A (mm)

B (mm)

øD (mm)

E (mm)

E’ (mm)

F (mm)

G (mm)

H (mm)

J (mm)

K (mm)

L (mm)

90 90 90 90 90 90 90

410 440 440 510 560 560 560

650 790 790 1 100 1 250 1 250 1 250

560 590 590 685 745 745 745

860 890 890 960 1 010 1 010 1 010

660 690 690 760 810 810 810

1 030 1 060 1 390 1 130 1 180 1 510 1 640

1 820 1 880 2 430 2 020 2 110 2 660 2 880

1 295 1 325 1 875 1 390 1 425 1 975 2 195

1 420 1 450 2 000 1 520 1 570 2 120 2 340

1 445 1 475 2 025 1 545 1 595 2 145 2 365


Heat pump heater Primary system (Glycol water 30%) 55/47,5°C - Secondary 10/45°C Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000 (1)

Power (kW) 18 35 35 40 45 50 50

Heat pump heater Nozzle E/S DN32 DN65 DN65 DN65 DN65 DN65 DN65

Flow rate m3/h 3,5 4,5 4,5 5,1 5,8 6,3 6,3

Head loss (mH2O)(1)

Surface area (m2)

0,6 0,2 0,2 0,3 0,4 0,4 0,4

1,72 4,1 4,1 4 4,56 5,1 5,1

mH2O = Meter of water column

1

MODELS AVAILABLE Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Standard model comes with a 100 mm-M1 jacket DXC050M11V DXC075M11V DXC100M11V DXC150M11V DXC200M11V DXC250M11V DXC300M11V

MANAGING AND OPTMISING OF ENERGY

TECHNICAL SPECIFICATIONS

Cooling constant (Wh/day.K.L) 0.060 0.049 0.046 0.037 0.032 0.031 0.030

Standard model comes with a 100 mm-M0 DXC050M01V DXC075M01V DXC100M01V DXC150M01V DXC200M01V DXC250M01V DXC300M01V

Cooling constant (Wh/day.K.L) 0.072 0.058 0.054 0.044 0.038 0.036 0.035

OPTIONs Reference KA1

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass stainless steel thermometer with dial 0/120°C - DN50 drainage valve - Air drain valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

29


CENTRALISED HOT WATER AND ENERGY MANAGEMENT STANDARD AND NON-STANDARD APPLICATIONS

As a key factor in energy consumption, when optimised, hot water production can be a source of energy savings. With the e-LESS®, the control and monitoring of your hot water production and storage installations, and the automation of certain maintenance operations, will provide you with a perfectly optimised performance. Scalable and user-friendly, the e-LESS® will also surprise you with its communication capabilities (remote access). e-LESS® is designed for use with all production methods : Accumulation / instantaneous / semi-instantaneous and all types of energy : Gas / Hydrogaz® / electricity / solar / heat pump/ combined energy.

DEVELOPED IN COLLABORATION WITH AN INTERNATIONAL MANUFACTURER OF INDUSTRIAL CONTROLLERS

INSTALLATIONS AVAILABLE Installed in a self-contained or existing control box, the e-LESS® is available in 6 standard versions: - Solar DHW production: • e-LESS–SB1 (basic), up to 2 cylinders in a series. • e-LESS–SE1 (enhanced), up to 3 cylinders in a series. - Non-solar DHW production: • e-LESS–NB1 (basic non-solar), up to 2 cylinders in a series. • e-LESS–NB1 (enhanced non-solar), up to 3 cylinders in a series.

30

- Non-solar hot water production: •e  -LESS–CE1 (electric boiler or power box with up to 6 stages). •e  -LESS–EP1 (PLAKÉO® : DHW plate heat exchanger system). Non-standard applications available on request: • Cold water; • Treatment baths; • Complex thermal systems; • Data logging from technical thermal installations


• Improved energy performance and savings relating to monitoring and managing the installation. • Anti-legionella protection via thermal treatment. • Automation : flushing, heating boosts, etc. • Stand-alone - Local access using a keyboard. - Remote access without the need for a CTM software* through the Ethernet network via a simple web browser for e-LESS® management (PC or Smartphone). - Communication using GSM card (depending on the option).

• Scalable > - Extension cards (up to 128 additional inputs/outputs). - Specific programmes on request. • Ready to use for standard applications. • Multi-purpose: - Can be used with new or existing installations; - Compatible with all centralised technical management software* or supervision software available on the market. • Simple ergonomics and multi-language menu. • Perfect compatibility between the machine and the measuring instruments.

MANAGING AND OPTMISING OF ENERGY

Avantages

1

*Note : centralised technical management

COMMUNICATION ARCHITECTURE

Local workstation

Modem / Router Remote workstation Mobile phone TCP/IP Ethernet

Modbus

All-or-nothing regulator on the electric water heater

Hydrogaz® burner control

PID control of power stages on the electric boiler

Control of the 3-way valve on the DHW plate heat exchanger system

31


SPECIFICATION

Solar

Outdoor version

CE compliance • 97/23 : pressure equipment • 73/23 : low voltage

Standard system • Back-lit display of 2”4 128 x 64 pixels, 4 lines. • 20-key IP65 keyboard. • Power; 24 V DC/8 mA. • Maximum consumption of 6 W. • All-or-nothing 24 V DC inputs. • 4-20 mA inputs for all types of probes and sensors. • All-or-nothing 30 V DC, 250 V AC 1A relays. • RS485 communication port. • Depending on the version, Ethernet card + SD 2 Go card. Several options possible depending on the application.

BASIC SHARED USER-DEFINED FUNCTIONS • Equipment control and safety devices: - Heating element (automatic or manual boost); - Gas burners (Hydrogaz®); - Single or double pumps (homogenisation for example); - Solenoid valves (rapid flushing); - Motorised valves (heating regulation circuits). • All-or-nothing or PID temperature regulation, or via a 3-way valve (depending on application). • Control and management of thermal shocks (anti-legionella), • Alarm management (temperature, water consumption, instantaneous flow rate, pressure). • Equipment cut-out in the event of faults (memorised). • Detailed metering of DHW consumption, energy, heating time, temperatures, alarms. • Choice of communication modes: via Modbus RS485 or TCP-IP on request. • Password-protected local and remote access. Note : The ability to obtain certain information is subject to the presence of optional measuring devices.

ADVANCED FUNCTIONS (depending on the version) • Ethernet remote access (integrated server, no need for management software): - Password-protected access; - Visualisation of input/output and fault status; - Set point modifications; - Configuration of alerts via email. • Alert messages sent automatically by e-mail or SMS. • Operating data logged on a Micro-SD card (temperatures, meters, status of peripheral devices, faults).

32


SE

Production of Solar Domestic Hot Water with up to 2 cylinders in a series Temperatures measured by PT100 probes and regulated by thermostats.

BS

BA

RB

Y

Operation

RB

TCT TEC EC

P1

The solar pump P1 is controlled by the sunlight sensor SE , subject to sufficient pressure in the solar circuit PSS . If the output temperature of the solar sensor SSC is greater than that of the lower section SBS of the solar cylinder BS the head pump P1 starts up, P2 operates until the desired temperature in the solar cylinder is reached (detection via SBS ). The desired temperature is set by the user via the thermostats TEC which control the heating elements EC in accordance with this value. With the thermostat TCT you can choose a thermal shock temperature, the duration of which is defined via the e-LESS速 (anti-legionella). With the solenoid valves EV you can remove the deposits that settle at the bottom of the cylinders through rapid flushing, the frequency of which can be set via e-LESS速. The pressure switches PS protect the heating elements against water shortages in the tanks. All faults resulting from the thermostats, pressure switches and pumps are logged and reported by e-LESS速. An energy audit.

SECS

SSBS CS

P3

EP SSC

PS PS

7

SBS

P2

PSS

TCT TEC EC

EV

EV

1

EF CI

MANAGING AND OPTMISING OF ENERGY

e-less-SB1 (basic solar)

SEF

 ackup cylinder BA B BS Solar tank CI Water meter with

P2 Charge pump P3 Homogenisation pump

SEF Cold water input

PS Water shortage

pulse output

SSC

pressure switch

CS Solar cell EC Heating element

PSS Solar circuit pressure

switch

SSBS

RB Loop return SBS Temperature sensor

EF Cold water inlet EP Plate exchanger

located at the bottom of the solar cylinder SE Sunlight sensor SECS Domestic hot water output temperature sensor

EV Solenoid valve

(quick flush) P1 Solar circuit pump

TCT TEC

temperature sensor Solar cell output temperature sensor Solar cylinder output temperature sensor Thermal shock thermostat Heating element thermostat

e-less-SE1 (enhanced solar) Production of Solar Domestic Hot Water with up to 3 cylinders in a series Temperatures measured and controlled by PT100 probes (adjustment of set points and hysteresis values). Ethernet communication card - data collection on a mini SD card.

SE

SECS

SSBS CS

BS

BA

BA

SRB TSC SEC EC

RB

Y

P1

RB

EP SSC

PS PS

7

P2

PSS

EV

Operation Same as the ELSSB1 version, plus : - Option to manage 3 cylinders in a series (instead of 2). - Replacement of thermostats ( TEC & TCT ) for heating elements EC , with probes regulating set point and thermal shock temperatures SEC . In this case, the different desired temperatures and the hysteresis are regulated and controlled via the e-LESS速, either locally or remotely.. - The Ethernet communication card makes it possible to visualise and modify settings remotely (without centralised technical management software, via a simple web browsers) and to send alerts - Data collection via micro SD card. - Return loop temperature control ( SRB probe). - Presence of an additional safety thermostat.

PS

P3

TSC SEC EC

SBS

PSS

RB

EV

TSC SEC EC

EV

EF CI

SEF

 ackup cylinder BA B BS Solar tank CI Water meter with pulse output

CS Solar cell EC Heating element

PS Water shortage pressure PSS RB SBS

EF Cold water inlet EP P  late exchanger EV Solenoid valve

(quick flush)

P1 S  olar circuit pump P2 Charge pump P3 Homogenisation

SE

switch Solar circuit pressure switch Loop return Temperature sensor located at the bottom of the solar cylinder Sunlight sensor

SEC Heating element and

thermal shock probe

SECS Domestic hot water

output temperature sensor

SEF Cold water input

temperature sensor

SRB Loop return

temperature sensor SSC Solar cell output temperature sensor SSBS Solar cylinder output temperature sensor TSC Safety thermostat

pump

33


e-less-NB1 (basic non-solar) Production of Non-Solar Domestic Hot Water with up to 2 cylinders in a series Temperatures measured by PT100 probes and regulated by thermostats.

SECS

Operation

RB

The desired temperature is set by the user via thermostats TEC , which control the heating elements EC in accordance with this value. With the thermostat TCT you can choose a thermal shock temperature, the duration of which is defined via the e-LESS速 (anti-legionella). With the solenoid valves EV you can remove the deposits that settle at the bottom of the cylinders through rapid flushing, the frequency of which can be set via e-LESS速. The pressure switch PS protects the heating elements against water shortages in the tanks. All faults resulting from the thermostats, pressure switches and pumps are logged and signalled by e-LESS速. An energy audit is possible thanks to the presence of a pulse output water meter CI and PT100 probes ( SEF / SECS > total energy consumed).

RB

PS TCT TEC EC

PS P

TCT TEC EC

EV EF

CI

EV

SEF

CI Water meter with pulse output EC Heating element EF Cold water inlet

output temperature sensor

SEF Cold water input

temperature sensor

EV Solenoid valve (quick flush) P

SECS Domestic hot water

TCT Thermal shock

Homogenisation pump

PS Water shortage pressure switch RB Loop return

thermostat

TEC Heating element

thermostat

e-less-NE1 (enhanced non-solar) Production of Non-Solar Domestic Hot Water with up to 3 cylinders in a series Temperatures measured and controlled by PT100 probes (adjustment of set points and hysteresis values). Ethernet communication card - Data collection via a mini SD card

SECS

ECS SRB

RB

RB

RB

PS

PS

PS

TSC SEC EC

EV

EF CI

TSC SEC EC

EV

TSC SEC EC

EV

SEF

Operation Same as the ELSNB1 version, plus : - Option to manage 3 cylinders in a series (instead of 2). - Replacement of thermostats TEC & TCT , for heating elements EC , with probes regulating set points and SEC . thermal shock temperatures. In this case, the different desired temperatures and the hysteresis are regulated and controlled via the e-LESS速, either locally or remotely. - The Ethernet communication card makes it possible to visualise and modify settings remotely (without centralised technical management software, via a simple web browser) and to send alerts. - Data collection via micro SD card. - Return loop temperature control SRB probe). - Presence of an additional safety thermostat.

34

CI Water meter with pulse

output

EC Heating element ECS PS Domestic Hot Water EF Cold water inlet EV Solenoid valve (quick flush)

SEC Heating element and

thermal shock probe

SECS Domestic hot water

output temperature sensor

SEF Cold water input

temperature sensor

PS Water shortage pressure

SRB Loop return temperature

RB Loop return

TSC Safety thermostat

switch

sensor


MANAGING AND OPTMISING OF ENERGY

e-less-CE1 (electric boiler) Production of Low Temperature Hot Water Temperature measurement with a PT100 probe (adjustment of set point and hysteresis value).

SE

Heating Chauffage

PS

TSC

Operation SEC

The user defines the set point temperature and the hysteresis via the e-LESS®. The aforementioned actuates one or several of the electric boiler’s CE stages of power ( PID regulation) depending on the water temperature SEC and potentially the external temperature SE . All faults resulting from the thermostat’s TSC , pressure switch PS , flow rate controller CD , and pump P , are logged and reported by e-LESS®.

CD

P

Options available - The Ethernet communication card makes is possible to visualise and modify settings remotely (without centralised technical management software, via a simple web browser) and to receive alerts. - Data collection via micro SD card. - Probe for regulation in accordance with the outside temperature. - GSM card (mobile phone alerts).

CD Flow rate controller CE Electric boiler P

Circulation pump

PS Water shortage pressure

switch

SE External temperature

sensor

PS Loop return temperature

sensor

TSC Safety thermostat

e-less-EP1 (PLAKEO® exchanger) Production of domestic hot water via a plate exchanger Temperature measurement with PT100 probes (adjustment of set point and hysteresis values).

1

CE

ECS

P3

V3V

Primary hot water

SEC

P1

BECS

P2

EP

SBB

EV EF

Operation The user defines the set point temperatures and the hysteresis via e-LESS®. If the temperature measured in the lower section of the cylinder SBB , is lower than the desired temperature, the charge pump P2 is actuated. The e-LESS® continuously adjusts the temperature of the domestic water leaving the exchanger SEC , by gradually moving the 3-way valve V3V . The temperature and duration of the thermal shock (anti-legionella) can be set as required. Faults resulting from the P1 and P2 , pumps are logged and reported by e-LESS®.

Options available - The Ethernet communication card makes is possible to visualise and modify settings remotely (without centralised technical management software, via a simple web browser) and to receive alerts. - Data collection via micro SD card. - GSM card (mobile phone alerts).

BECS Domestic hot water ECS PS EF EP EV

tank Domestic Hot Water Cold water inlet Plate exchanger (PLAKÉO®) S  olenoid valve (quick flush)

P1 Primary circuit pump P2 Charge pump P3 Loop pump SEC PS Heating element and

thermal shock probe

SBB PS Sensor placed at

the bottom of the cylinder V3V 3-way regulation valve for the primary

35


MODELS AVAILABLE Detailed functions Maximum number of cylinders (boiler for CE1 - exchanger for EP1) ALARMS Fault alarm for each safety thermostat (TSC) High and low alarms in relation to distribution of DHW (SECS / SEC for the EP1 version) or water for heating on the boiler (SEC) Fault alarm for one or several pressure switches (PS) Fault alarm for each pressure switch (PS) Flow rate controller fault alarm (CD) Fault alarm for one or several pumps Delay activation for each fault (P or P1P2, except EP1 version for P3) Emergency cut-off depending on the version, in the case of ice, overheating, loss of flow or pressure METERS, MEASUREMENTS Control and measurement of sunlight levels (W/m² - probe) Metering of the volumes of water consumed with reset (CI) Metering of the solar energy recovered in kWh with reset (SEF/SBS) - Thermal audit Metering of backup energy in kWh with reset (SEF/SBS) - Thermal consumption Metering of the total energy consumed in kWh with reset (SEF/SECS) Hourly operating meter for each heating element or for each of the boiler's power stages with reset INDICATORS Instantaneous flow rate indicator at 1 min (l/hr) Temperature indicator for incoming cold water (EF) Solar circuit temperature indicator (SSC) Temperature indicator for the lower section of the solar cylinder (SBS) Output temperature indicator for solar cylinder (SBS) Temperature indicator for the distribution of DHW (SECS / SEC for the EP1 version) or water for heating on the boiler (SEC) Return loop temperature indicator with alarm (SRB) External temperature indicator (SE) Heating indicator (heating element switched on or off) Remote visualisation of history (via an internet browser on a PC or Smartphone) Visualisation of the status of each heating element's thermostat (TEC) Visualisation and adjustment of set point values on the e-LESS® screen Remote visualisation and adjustment of set point values (via a web browser on a PC or Smartphone) Fault history Visualisation of faults on the e-LESS® screen Remote visualisation of faults (via a web browser on a PC or Smartphone) CONTROLS Control of each heating element with the thermostat (TEC) Control of each heating element with a PT100 probe (3 or 6 stages on the boiler depending on the power) Control of the single solar or primary pump (P1) Control of the single or double solar or primary pump (P1) Control of the single charge pump (P2) Control of the single or double charge pump (P2) Control of the single homogenisation (P3, P) or circulation (P) pump Control of the single or double homogenisation (P3, P) or circulation (P) pump Control of solenoid valves upon draining (rapid flushing) Control of the 3-way regulating valve Remote control of the heating by dry contact (if deactivated, recovery is possible) SETTINGS, PROGRAMMING Adjustment of the actuation thresholds for pumps (solar and domestic circuit differential) Limiting the temperature of solar panels (CS) Programming the start time and the duration of the thermal shocks Adjustment of the set point temperature on each device (TEC thermostat) Adjustment and regulation of the set point temperature and the hysteresis with e-LESS® for each device (PT100-SEC probe) Adjustment and regulation of the thermal shock temperature on each device (TCT thermostat) Adjustment and regulation of the thermal shock temperature and the hysteresis with e-LESS® for each device (PT100-SEC probe) SYSTEM (INTERFACE, COMMUNICATION) Local secured access Remote secured access Choice of language (FR/EN) Reset (restore to factory settings) Micro SD card reader Micro SD 2 Go card Recording information on the Micro SD card (energy meter readings, water volumes, temperatures, alarms) On-board web server Ethernet communications card Automatic email alerts in relation to faults Remote downloading of the history file in Excel format to the Mini SD card (via a web browser on a PC or Smartphone) GSM card Automatic SMS alerts in relation to faults Modbus RS485 communication TCP-IP communication Additional card with 4 inputs for PT100 probes Additional card with 8 digital inputs + 8 outputs Additional card with 4 x 4-20 mA inputs + 2 x 4-20 mA analogue outputs

ELSSB1 ELSSE1 ELSNB1 ELSNE1 ELSCE1 ELSEP1 2 3 2 3 1 1 •

• •

• • • •

• • •

• • • •

• • •

• • •

• • • • •

• • • • •

• • • • •

• • • • •

• •

• •

• • o • o • • o

• • • • • • •

• • •

• • o • o • • o

• • • • •

• • o • • o • • o

• •

o • o • • o

• •

• •

• • •

• •

• •

• • • •

• • •

• •

• •

• •

• •

• o • • • o o • o o

• • • • • • • • • •

• o • • • o o • o o

o

• o o o o

o o • o o o o

• • • • • • • • • •

• o • • • o o • o o

• o • • • o o • o o

o

o

o

• o o o o

o o • o o o o

o o • o o o o

o o • o o o o

Nota : The acquisition of certain information is subject to the presence of measuring devices that may be optional (water meters with pulse output, pressure switches, flow rate controllers, sunlight sensors, probes, thermostats, pumps, solenoid valves, etc.). Our prices ranges illustrate the extent of our supplies. • series / o : option

36


ELSSB1 ELSSE1 ELSNB1 ELSNE1 ELSCE1 ELSEP1 • • • • • • 10 10 10 10 10 10 6 10 2 6 2 2 6 14 6 6 6 6

Automation > All-or-nothing 24 V DC digital inputs > 4-20 mA inputs (probe/sensor) > All-or-nothing 30 V DC, 250 V AC-1A relays > Unlimited number of inputs without extensions

3

0

3

1

6

8

> Unlimited number of outputs without extensions (1 on CE1 if 3-stage regulation + double pump) > Maximum number of inputs/outputs (with extension cards) Micro SD 2 Go card PT100 probe Thermal shock thermostat input (via a probe on ELSSE1 & ELSNE1 versions) Safety thermostat input (provided by a double safety thermostat on ELSSB1 & ELSNB1) Box with power and protection

0

4

0

1

0

0

128 o 5

128 • 9

128 o 2

128 • 6

128 o 1

128 o 2

1

-

1

-

-

-

1

3

1

3

1

-

•/-

•/-

•/-

•/-

-

-

MANAGING AND OPTMISING OF ENERGY

Equipment

1

• Series / - Not supplied (as required) O : Optional extras

OPTIONAL ACCESSORIES • Ethernet communications card • GSM card • Micro SD 2 Go card • Additional card with 4 x 4-20 mA inputs + 2 x 4-20 mA analogue outputs. • Additional card with 4 inputs for PT100 probes. • Additional card with 8 inputs + 8 all-or-nothing outputs • Water meter with pulse output • Flow controller • Leak detector • 1" solenoid valve (rapid flushing) • Homogenisation kit (circulator + 2 valves + 1 non-return valve) • Primary kit (circulator + thermostat for a circuit) • Water shortage pressure switch • Sensor for measuring sunlight levels • PT100 probe • Safety/regulation thermostat • 3-way motorised valve for a primary circuit • 3-way motorised valve for a secondary circuit • Any other accessory available on request

Example of remote access to an installation with a PLAKEO® plate heat exchanger system

Provision (• : series ; o : option) Standard model references ELSSB1 ELSSE1 ELSNB1 ELSNE1

Application

Basic solar Enhanced solar Basic non-solar Enhanced non-solar

Automation

Micro SD 2 Go card

• • • •

o • o •

Thermal shock Thermal shock PT100 thermostat (via a thermostat (via a probe probe on ELSSE1 & probe on ELSSE1 & ELSNE1 versions) ELSNE1 versions) 5 7 2 6

1 1 1 1

Box with power and protection • • • •

Warranties (in accordance with our general conditions of sale) : 1 year

37


POWER, PROTECTION & REGULATION BOXES Domestic hot water Hot water for heating ElectriCAL POWER FROM 3 TO  2, 000

kW

LACAZE ENERGIES’ electrical power, protection and regulation boxes are designed to be combined with one or several cylinders with or without an electric backup.

Because every installation is different, they can also be tailored to meet specific needs requiring a particular operating mode or equipment (water level regulation system, hydraulic accessory or burner controls, information logging, etc.). Each component is chosen with meticulous care to offer you boxes that combine quality and reliability.

38


• Factory-tested monobloc equipment, ready to use. • Made-to-measure installations (optional extra). • Installation possible indoors (boiler room) or outdoors. • Time savings when fulfilling projects.

• The electric box can be fitted onto the cylinder. • High quality branded components. • Short lead times (standardised NF C-15100 -compliant models).

SPECIFICATION

MANAGING AND OPTMISING OF ENERGY

Avantages

1

CE compliance • 97/23 : pressure equipment • 73/23 : low voltage

• Heating power from 3 kW. • Three-phase 400 V + Neutral + Earth • Weatherproofing: IP55. • General switch. • Power contactor for the immersion heater. • Protection fuses. • Remote control workstations (load shedding). • ‘’Auto / 0 / Manu’’ switch. • Power LED. • Heat indicators

OPTIONS • Control and protection of the electric backup (RBI kit for DHW cylinders): - Additional immersion heater located in the top section of the tank (three-phase 230/400 V) - Double safety unipolar thermostat. • Single pump control. • Double pump control. • Solenoid valve control. • Motorised valve control. • Integration and programming of e-LESS® module (centralised management of hot water and energy). • Pre-cabling carried out on boxes supplied separately. • Higher power on request.

Warranties (in accordance with our general conditions of sale) = 1 year

39


OPERATING PRINCIPLE CI Water meter with

pulse output

EC Heating element

SECS

ECS

ECS Domestic Hot Water EF Cold water inlet

SRB

EV Solenoid valve

(quick flush)

PS Water shortage

RB

RB

pressure switch

RB

RB RB Loop return

PS

PS

TSC SEC EC

SEC Heating element and

PS

TSC SEC EC

thermal shock probe

TSC SEC EC

SECS Domestic hot water

output temperature sensor

SEF Cold water input

EV

EF

EV

temperature sensor

EV

SRB Loop return

temperature sensor

CI SEF

TSC Safety thermostat

MODELS AVAILABLE 1 tank - without ILH Reference Three-phase 400 Electrical resistance V Box + Earth +Neutral AR3 1x3 AR6 1x6 AR9 1x9 AR12 1 x 12 AR15 1 x 15 AR20 1 x 20 AR24 1 x 24 AR30 1 x 30

2 tanks - without ILH Reference Three-phase 400 Electrical resistances V Box + Earth +Neutral AR3B2 2x3 AR6B2 2x6 AR9B2 2x9 AR12B2 2 x 12 AR15B2 2 x 15 AR20B2 2 x 20 AR24B2 2 x 24 AR30B2 2 x 30

3 tanks - without ILH Reference Three-phase 400 Electrical resistances V Box + Earth +Neutral AR3B3 3x3 AR6B3 3x6 AR9B3 3x9 AR12B3 3 x 12 AR15B3 3 x 15 AR20B3 3 x 20 AR24B3 3 x 24 AR30B3 3 x 30

4 tanks - without ILH Reference Three-phase 400 Electrical resistances V Box + Earth +Neutral AR3B4 4x3 AR6B4 4x6 AR9B4 4x9 AR12B4 4 x 12 AR15B4 4 x 15 AR20B4 4 x 20 AR24B4 4 x 24 AR30B4 4 x 30

1 tank - 1 ILH Reference Threephase 400 V Box + Earth +Neutral AR3B1RBI3 AR6B1RBI3 AR9B1RBI6 AR12B1RBI6 AR15B1RBI9 AR20B1RBI9 AR24B1RBI12 AR30B1RBI12

40

2 tanks - 1 ILH

Electrical resistances

ILH power (kW)

1x3 1x6 1x9 1 x 12 1 x 15 1 x 20 1 x 24 1 x 30

1x3 1x3 1x6 1x6 1x9 1x9 1 x 12 1 x 12

Reference Threephase 400 V Box + Earth +Neutral AR3B2RBI3 AR6B2RBI3 AR9B2RBI6 AR12B2RBI6 AR15B2RBI9 AR20B2RBI9 AR24B2RBI12 AR30B2RBI12

Electrical resistances

ILH power (kW)

2x3 2x6 2x9 2 x 12 2 x 15 2 x 20 2 x 24 2 x 30

1x3 1x3 1x6 1x6 1x9 1x9 1 x 12 1 x 12


ILH power (kW)

4x3 4x6 4x9 4 x 12 4 x 15 4 x 20 4 x 24 4 x 30

1x3 1x3 1x6 1x6 1x9 1x9 1 x 12 1 x 12

Electrical resistances

ILH power (kW)

1

3x3 3x6 3x9 3 x 12 3 x 15 3 x 20 3 x 24 3 x 30

3x3 3x3 3x6 3x6 3x9 3x9 3 x 12 3 x 12

4 tanks - 1 ILH

Electrical resistances

ILH power (kW)

3x3 3x6 3x9 3 x 12 3 x 15 3 x 20 3 x 24 3 x 30

1x3 1x3 1x6 1x6 1x9 1x9 1 x 12 1 x 12

Reference Threephase 400 V Box + Earth +Neutral AR3B4RBI3 AR6B4RBI3 AR9B4RBI6 AR12B4RBI6 AR15B4RBI9 AR20B4RBI9 AR24B4RBI12 AR30B4RBI12

2 tanks - 2 ILH Reference Threephase 400 V Box + Earth +Neutral AR3B2RBI32 AR6B2RBI32 AR9B2RBI62 AR12B2RBI62 AR15B2RBI92 AR20B2RBI92 AR24B2RBI122 AR30B2RBI122

Electrical resistances

MANAGING AND OPTMISING OF ENERGY

3 tanks - 1 ILH Reference Threephase 400 V Box + Earth +Neutral AR3B3RBI3 AR6B3RBI3 AR9B3RBI6 AR12B3RBI6 AR15B3RBI9 AR20B3RBI9 AR24B3RBI12 AR30B3RBI12

3 tanks - 3 ILH

Electrical resistances

ILH power (kW)

2x3 2x6 2x9 2 x 12 2 x 15 2 x 20 2 x 24 2 x 30

2x3 2x3 2x6 2x6 2x9 2x9 2 x 12 2 x 12

Reference Threephase 400 V Box + Earth +Neutral AR3B3RBI33 AR6B3RBI33 AR9B3RBI63 AR12B3RBI63 AR15B3RBI93 AR20B3RBI93 AR24B3RBI123 AR30B3RBI123

4 tanks - 4 ILH Reference Threephase 400 V Box + Earth +Neutral AR3B4RBI34 AR6B4RBI34 AR9B4RBI64 AR12B4RBI64 AR15B4RBI94 AR20B4RBI94 AR24B4RBI124 AR30B4RBI124

Electrical resistances

ILH power (kW)

4x3 4x6 4x9 4 x 12 4 x 15 4 x 20 4 x 24 4 x 30

4x3 4x3 4x6 4x6 4x9 4x9 4 x 12 4 x 12

For made-to-measure models please contact us.

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

41


42


2

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING) SOLAR PLAKEO®.............................................................................. 44|47 Solar plate heat exchanger system

Solar DHW storage cylinder....................................................... 48|59 “SOLAR PREFERENCE” 500 to 6,000 litres range “SOLAR DPX” duplex stainless steel 300 to 3,000 litres range “GLASS LINED” 300 to 3,000 litres range

Solar DHW coil cylinder.............................................................. 60|77 “SOLAR DPX SOLAIRE” duplex stainless steel 300 to 3,000 litres range - Single lower coil “SOLAR DPX SOLAIRE” duplex stainless steel 500 to 3,000 litres range - Dual coil “GLASS LINED” 300 to 3,000 litres range - Single coil “GLASS LINED” 300 to 3,000 litres range - Dual coil

Solar DHW cylinder for primary and/or solar heating............ 78|97

“SOLAR PREFERENCE” 500 to 3,000 litres range - Primary heater “SOLAR DPX” duplex stainless steel 500 to 3,000 litres range - Primary heater “SOLAR PREFERENCE” 500 to 3,000 litres range - Solar heater “SOLAR DPX” duplex stainless steel 500 to 3,000 litres range - Solar heater “SOLAR PREFERENCE” 500 to 3,000 litres range - Solar and primary heater “SOLAR DPX” duplex stainless steel 500 to 3,000 litres range - Solar and primary heater

Solar DHW dual energy Hydrogaz® cylinder........................... 98|107 “SOLAR PREFERENCE” 1,000 to 3,000 litres range “SOLAR DPX” duplex stainless steel 1,000 to 3,000 litres range

SOLAR CALEO® hot water for heating cylinder.................... 108|113 Recovery and/or backup of 500 to 4,000 litres Backup of 500 to 4,000 litres

Solar hot water for heating coil cylinder............................. 114|121 300 to 3,000 litres - Single coil 500 to 3,000 litres - Dual coil

43


SOLAR PLAKEO

®

SOLAR PLATE HEAT EXCHANGER SYSTEM The “SOLAR PLAKEO®” module is a transfer station designed for solar installations where the maximum surface area of the collectors is between 10 and 80 m2. This compact device comes preassembled and can integrate all control, safety and regulation devices required for its operation (exchanger with a high heat exchange coefficient, a solar module with circulators,. regulators and accessories).. Both the exchanger and module are thermally insulated to minimise heat loss. Its combination with a “SOLAR PREFERENCE” buffer cylinder results in the production of solar DHW.

ADVANTAGES • Removable plates made of 316 stainless steel for easy maintenance. • Possible increase in power by addition of plates. • A compact module which can be installed in small spaces. • Module supplied fully preset (can be re-programmed by the user). • Easy and quick to commission. • Minimised heat loss (insulated elements). • Excellent resistance to corrosion (316 stainless steel plates). • High exchange coefficient. • Low head loss.

44


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

EXAMPLE OF THE SOLAR PRODUCTION OF DHW WITH 6 PROBE REGULATION

6

S1 7 8

7 5

S5

S3

2 S6 12

5 9

10

11 4

3

S2

2

10 S4 1 1 Cold water inlet 2 Flow rate meter with pulse output 3 Secondary pump 4 Plate exchanger 5 Solar module 6 Sunlight sensor

7 Solar panel 8 Solar pump

S1 Solar panel temperature sensor S2 Temperature sensor located at the bottom of the solar tank

9 Solar tank

S3 Exchanger temperature sensor S4 Cold water input temperature sensor

10 Backup tank 11 Gas equipment 12 Domestic hot water

outlet

S5 Recovery tank output temperature sensor S6 Feed temperature sensor

45


SPECIFICATION

Solar

Differential solar regulation

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

• 12 T- probe inputs • 9 relay outputs • Supplied with 6 probes

Thermometers and ball valves

Safety valve (6 bar) Valve and nozzle for rinsing/filling the solar circuit

Non-return valves

Manometer (bar) Circulator

Drain valve*

Flow rate meter* + flow control valve

Solar module Maximum solar pressure = 6 bar Supplied pre-assembled with: - Circulator - Safety valve - Manometer - Thermometers - Non-return valves - Flow rate meter - Degasser - Valves - Thermal insulation

Plate exchanger Secondary circulator

46

Valve and nozzle for rinsing/filling the solar circuit * on the DN20

Gasketed plate heat exchanger • 316 stainless steel and NBR gaskets • Maximum working pressure = 6 bar (Maximum working pressure = 10 bar on secondary DHW circuit) • Thermally insulated exchanger • Single secondary pump • Flow control valve


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

Dimensions SP G

EP

EP Primary inlet

(threaded)

ES Secondary inlet

(threaded)

SP WP Primary outlet

(threaded)

SS SS Secondary

outlet (threaded)

A

SS

ES

H

F

2

C

D B

E

A B C D E F G H EP (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (Ø) PK007 to PK020 1440 420 360 450 520 640 100 128 3/4’’ PK026 to PK052 1550 430 360 450 520 640 125 128 1’’1/4 Model

SP (Ø) 3/4’’ 1’’1/4

ES (Ø/DN) 1’’ 1’’

SS (Ø) 1’’ 1’’

Weight (kg) single secondary pump 61 & 62 68 à 76

MODELS AVAILABLE

Reference(1)

PK007 PK013 PK020 PK026 PK033 PK039 PK046 PK052

Power (kw)(2) 6,5 13 19,5 26 32,5 39 45,5 52

Primary Maximum surface Flow Exchanger Head loss area. rate head loss available Solar m3/h (mWC) (mWC) panels (m2) 10 0,25 0,1 7,6 20 0,5 0,1 7 30 0,75 0,1 6,3 40 1 0,2 10,3 50 1,25 0,2 10,1 60 1,5 0,2 9,2 70 1,75 0,3 9,2 80 2 0,3 8,8

Secondary T1 °C

T2 °C

Flow rate m3/h

60 60 60 60 60 60 60 60

36 36 36 36 36 36 36 36

0,2 0,4 0,6 0,8 1 1,2 1,4 1,6

Exchanger Head loss head loss available (mWC) (mWC) 0,1 0,2 0,2 0,2 0,2 0,2 0,2 0,3

4,6 4,5 4,4 4,3 4,2 4,1 4 3,8

T1 °C

T2 °C

27 27 27 27 27 27 27 27

55 55 55 55 55 55 55 55

Single primary pump + single secondary pump – (2) Primary circuit 60/36°C - Secondary 27/55°C - Glycol water 30%

(1)

47


SOLAR DHW CYLINDER storage 300 to 

6,000 Litres

The solar DHW storage cylinder is designed for use with energy recovery systems to amass a water reserve to cope with peaks in demands. If necessary, a backup system can be used to provide additional energy. This device has been specifically designed to meet the production and storage needs of solar domestic hot water (collection and backup) in the service and manufacturing sectors. There are six different types of tank available. to meet all needs : Carbon steel with RC coating

Stainless steel

Version

48

Enamelled carbon steel

RC851

RC851

RC951

DUPLEX STAINLESS STEEL

316L STAINLESS STEEL

S235

Capacity

0,3 to 3 m3

4 to 6 m3

0,3 to 6 m3

0,3 to 3 m3

0,3 to 3 m3

0,3 to 3 m3

T-max

85°C constant

85°C peak

95°C peak

95°C constant

95°C constant

99°C constant

Special resistance to chlorinated shocks

+

+

+

+++

++

+++


• Inspection manhole ø 400 mm*: - Easy maintenance - Thermal equipment can be installed at a later date. • Significant hot water storage capacity meaning that peaks in demand are met. • Particularly suited for use with solar energy recovery systems (dimensions of nozzles, number and location). • Can be combined with any energy recovery or production system. • Delivered to site with pre-installed insulation (for carbon and stainless steel cylinders only) and thermal backup system (can be rapidly removed if required).

• Insulation of the bottom dished end and the manhole as standard. • Storage of water at a constant temperature of up to 99°C (depending on the model). • Extended warranty for stainless steel version. • Non-standard versions are available on request (higher pressure and special dimensions). *For carbon steel cylinders with RC coating and stainless steel cylinders: nozzle ø 250 mm on the 300 L For enamelled steel cylinders: manhole ø 400 mm for the 750 to 3,000 litres version (or handhole DN 110 mm for the 300 to 3,000 L version).

OPERATING PRINCIPLE (Solar energy + Electrical backup)

7

Solar regulation

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

ADVANTAGES

2

8 6

17 13

12

11

Y 5

9 3

4

15

7

10 2 18 16

1

14 1 Cold water inlet 2 Secondary pump

6 Solar panel 7 Sunlight sensor

3 Plate heat exchanger 4 Solar module

8 Solar panel temperature sensor 13 DHW tank 9 Loop return 14 Drainage 10 Temperature sensor located at 15 Solar panel output

5 Expansion vessel

the bottom of the solar cylinder

11 Electrical backup 12 DHW outlet

16 Cold water input temperature

sensor

17 Domestic hot water output

temperature sensor

18 Cold water meter

temperature sensor

49


“SOLAR PREFERENCE” range 500 to 6,000 litres

SPECIFICATION

RC Solar

Optimised connections

CE compliance • 97/23/CE

Cylinder with «RC» coated carbon steel tank

Tank • Vertical carbon steel tank with 3 feet. • 500 to 6,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manhole(1). Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating • Finished with “RC851” coating (Maximum temp = 85°C constant) or "RC951" coating (T-max = 95°C at peak times) WRAS approved material • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Options • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Other thicknesses of insulation. • Non-standard versions available on request (higher working pressure and custom dimensions).

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Accessories = 1 year

50

Reinforced thermal insulation

Inspection manhole


øD

AN1 AN1 Threaded nozzle 40/49

EC

for anode

AN2 Threaded nozzle 40/49 for

2nd anode (Volume ≥ 4m3)

TM

EC Hot water outlet DA

TT

EF Cold water inlet DA Outlet/loop return PI Support feet

AN2

TM Nozzles for thermometer

AN1

TH Manhole with an internal

diameter of 400 mm (handhole with a diameter of 250 mm for 300 litres)

TH H

DA

TT Nozzles for thermostat

(or PT100 probe)

VM Threaded drainage outlet

J

TT

B

EF

E

C

F

G1

G2

EF

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

dimensions

VM

180°

2

A

PI

EC VM

DA EF TT

500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

EF (G int. thread) DA-VM (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

5 000

DN15

DN50

6 000

DN15

DN50

EF DA

90°

270°

315° 0°

AN1 AN2 TH TM

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

A (mm) 90 90 90 90 90 90 90 90 90 90 110 110 110

B (mm) 410 440 440 475 475 510 510 560 560 560 630 630 630

C (mm) 560 590 590 650 650 685 685 745 745 745 855 855 855

ØD (mm) 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300 1 500 1 500 1 500

Capacity TM – TT (G int. (litres) thread)

E (mm) 660 690 690 725 725 760 760 810 810 810 860 860 860

F (mm) 860 890 890 925 925 960 960 1 010 1 010 1 010 1 060 1 060 1 060

EC

Weight (kg)

DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN80 flat flange DN80 flat flange

140 175 210 235 280 290 345 400 430 470 680

G1 (mm) G2 (mm) 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450 1 530 1 780 1 880 2 130 2 160 2 410

H (mm) 1 820 1 880 2 430 1 960 2 510 2 020 2 570 2 110 2 350 2 660 2 790 3 490 3 990

790 890 J (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120 2 185 2 805 3 305

Note: H = High version ; B = Low version.

(1)

51


MODELS AVAILABLE Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

Standard model with a 100 mm-M1 jacket Cooling constant Tank 85°C Tank 95°C (Wh/day.K.L) PLT050M11V PST050M11V 0.060 PLT075M11V PST075M11V 0.049 PLT100M11HV PST100M11HV 0.046 PLT100M11BV PST100M11BV 0.042 PLT150M11HV PST150M11HV 0.039 PLT150M11BV PST150M11BV 0.037 PLT200M11HV PST200M11HV 0.034 PLT200M11BV PST200M11BV 0.032 PLT250M11V PST250M11V 0.031 PLT300M11V PST300M11V 0.030 PLT400M11V PST400M11V 0.026 PLT500M11V PST500M11V 0.025 PLT600M11V PST600M11V 0.024

Standard model with a 100 mm-M0 jacket Cooling constant Tank 85°C Tank 95°C (Wh/day.K.L) PLT050M01V PST050M01V 0.072 PLT075M01V PST075M01V 0.058 PLT100M01HV PST100M01HV 0.054 PLT100M01BV PST100M01BV 0.050 PLT150M01HV PST150M01HV 0.046 PLT150M01BV PST150M01BV 0.044 PLT200M01HV PST200M01HV 0.041 PLT200M01BV PST200M01BV 0.038 PLT250M01V PST250M01V 0.036 PLT300M01V PST300M01V 0.035 PLT400M01V PST400M01V 0.030 PLT500M01V PST500M01V 0.029 PLT600M01V PST600M01V 0.028

Note : H = High version ; B = Low version.

(1)

OPTIONS Reference KA1

52

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve


300 to 3,000 litres

SPECIFICATION

DPX Solar

Optimised connections

DUPLEX stainless steel

Tank • Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manhole(1) (handhole with a diameter of 250 mm for 300 litres). • T-max = 95°C constant.

CE compliance • 97/23/CE

Reinforced thermal insulation

Inspection manhole

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

“SOLAR DPX” DUPLEX STAINLESS STEEL range

2

Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Options • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve).

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • Accessories = 1 year.

53


Dimensions øD

EC

DA

TT

TM TH

H

DA

DA Outlet/loop return L

EC Hot water outlet

J

K

TT

EF Cold water inlet / Solar

exchanger outlet

G

EF

E’

PI Support feet

F

TH Manhole with an

E

internal diameter of 400 mm (handhole with a diameter of 250 mm for 300 litres)

B

EF

TM Nozzles for thermometer TT Nozzles for thermostat

(or PT100 probe)

A

PI

VD

VD DN50 drainage

270°

EC VD

DA EF TM TT

DA EF

180°

TH

90°

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

54

A (mm) B (mm) 90 395 90 410 90 440 90 440 90 510 90 560 90 560 90 560

øD (mm) 550 650 790 790 1 100 1 250 1 250 1 250

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

E (mm) E’ (mm) F (mm) 545 685 565 560 860 660 590 890 690 590 890 690 685 960 760 745 1 010 810 745 1 010 810 745 1 010 810

G (mm) 855 1 030 1 060 1 390 1 130 1 180 1 510 1 640

TM-TT (G int. thread) DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 H (mm) 1 535 1 820 1 880 2 430 2 020 2 110 2 660 2 880

EC-EF-DA-VD Weight (G ext. thread) (kg) DN50 95 DN50 140 DN50 175 DN50 210 DN50 290 DN50 400 DN50 430 DN50 470 J (mm) 1 030 1 295 1 325 1 875 1 390 1 425 1 975 2 195

K (mm) 1 155 1 420 1 450 2 000 1 520 1 570 2 120 2 340

L (mm) 1 180 1 445 1 475 2 025 1 545 1 595 2 145 2 365


Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

Standard model with a 100 mm-M1 jacket DXT030M11B DXT050M11V DXT075M11V DXT100M11V DXT150M11V DXT200M11V DXT250M11V DXT300M11V

Cooling constant (Wh/day.K.L) 0.077 0.060 0.049 0.046 0.037 0.032 0.031 0.030

OPTIONS Reference KA1

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Standard model with a 100 mm-M0 jacket DXT030M01B DXT050M01V DXT075M01V DXT100M01V DXT150M01V DXT200M01V DXT250M01V DXT300M01V

Cooling constant (Wh/day.K.L) 0.091 0.072 0.058 0.054 0.044 0.038 0.036 0.035

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

MODELS AVAILABLE

2

55


“SOLAR GLASS LINED” range 300 to 3,000 litres

SPECIFICATION

GL Solar

Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank). Note : Compliant with the recommendations of the Directorate-General for Health.

Internal coating • Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 - Euroclass B fire rated (λ = 0,037 W/m/K) : • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K) : • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Options • Electrical kits with immersion heating elements from 3 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 3 to 30 kW, depending on the capacity of the tanks. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

56


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

Dimensions

DN110 handhole (from 300 to 3,000 litres)

ø 400 mm inspection manhole (from 750 to 3,000 litres)

36

2

ø2

ø2

ø 1/2

2 or 3 anodes according to model ø2

B

øK C

øA

D

øK

E

ø2

10

0

0

G

F

I

J

10

ø2

45°

45°

57


Dimensions Capacity (litres)

ØA (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

Weight with insulation (kg)

300

630

1386

1155

807

472

150

204

204

-

330

90

500

630

1983

1752

1108

472

150

204

204

-

330

125

750

790

1891

1601

1051

501

150

196

196

465

425

230

1 000

790

2244

1956

1246

501

150

196

196

465

425

280

1 500

1100

2073

1700

1140

600

200

221

221

620

580

400

2 000

1100

2261

1888

1244

600

200

221

221

620

580

430

2 500

1400

2136

1680

1180

680

200

216

216

730

730

560

3 000

1400

2263

1808

1250

680

200

216

216

730

730

590

MODELS AVAILABLE Capacity (litres)

Standard model with a 50 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

300

-

EMT030M1B

0,000260

-

EMT030M0B

0,000167

500

-

EMT050M1B

0,000240

-

EMT050M0B

0,000148

750

EMT075M1V

EMT075M1B

0,000184

EMT075M0V

EMT075M0B

0,000123

1 000

EMT100M1V

EMT100M1B

0,000140

EMT100M0V

EMT100M0B

0,000108

1 500

EMT150M1V

EMT150M1B

0,000123

EMT150M0V

EMT150M0B

0,000096

2 000

EMT200M1V

EMT200M1B

0,000109

EMT200M0V

EMT200M0B

0,000085

2 500

EMT250M1V

EMT250M1B

0,000098

EMT250M0V

EMT250M0B

0,000077

3 000

EMT300M1V

EMT300M1B

0,000093

EMT300M0V

EMT300M0B

0,000073

Capacity (litres)

58

Standard model with a 50 mm-M1 jacket

Standard model with a 100 mm-M1 jacket

Standard model with a 100 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

300

-

EMT030M11B

0,000153

-

EMT030M01B

0,000113

500

-

EMT050M11B

0,000132

-

EMT050M01B

0,000104

750

EMT075M11V

EMT075M11B

0,000101

EMT075M01V

EMT075M01B

0,000085

1 000

EMT100M11V

EMT100M11B

0,000090

EMT100M01V

EMT100M01B

0,000074

1 500

EMT150M11V

EMT150M11B

0,000076

EMT150M01V

EMT150M01B

0,000067

2 000

EMT200M11V

EMT200M11B

0,000062

EMT200M01V

EMT200M01B

0,000059

2 500

EMT250M11V

EMT250M11B

0,000059

EMT250M01V

EMT250M01B

0,000053

3 000

EMT300M11V

EMT300M11B

0,000052

EMT300M01V

EMT300M01B

0,000051


Electrical kits with immersion heating elements Reference Power (kW) Mounted on DN110 handhole

Mounted on ø 400 mm inspection manhole

KEB03B (from 300 to 3.000 litres)

-

3

KEB09B (from 300 to 3.000 litres)

KEB09V (from 750 to 3.000 litres)

9

KEB15B (from 300 to 3.000 litres)

KEB15V (from 750 to 3.000 litres)

15

KEB30B (from 300 to 3.000 litres)

KEB30V (from 750 to 3.000 litres)

30

-

KEB45V (from 750 to 3.000 litres)

45

-

KEB60V (from 750 to 3.000 litres)

60

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

options

2

Electrical kits with steatite heating elements Reference

Power (kW)

KES03 (from 750 to 3.000 litres)

3 (1x3kW)

KES06 (from 750 to 3.000 litres)

6 (2x3kW)

KES09 (from 750 to 3.000 litres)

9 (3x3kW)

KES12 (from 750 to 3.000 litres)

12 (4x3kW)

KES15 (from 750 to 3.000 litres)

15 (5x3kW)

KES18 (from 2500 to 3.000 litres)

18 (3x6kW)

KES24 (from 2500 to 3.000 litres)

24 (4x6kW)

KES30 (from 2500 to 3.000 litres)

30 (5x6kW)

59


SOLAR DHW COIL CYLINDER 300 to 

3,000 Litres

Thanks to the high-powered exchangers, the coil cylinder represents an economical and high-performance solution for use with all types of energy. It has been specifically designed to meet solar domestic hot water production and storage needs (collection and backup) in the service and manufacturing sectors. The lower coil heats the water using a renewable energy source (solar, heat pump, etc.). If necessary, en electric immersion heater or a second coil located in the top section can provide additional energy. This DHW heat exchanger system can be used with two types of tank to suit all needs:

Stainless steel Version Capacity T-max Special resistance to chlorinated shocks

60

Enamelled carbon steel

DUPLEX STAINLESS STEEL

316L STAINLESS STEEL

S235

0,3 to 3 m3

0,3 to 3 m3

0,3 to 3 m3

95째C constant

95째C constant

95째C constant

+++

++

+++


• Multi-purpose: - Heating possible from any energy source. - Simultaneous feeding of multiple consumer circuits. •A  ccelerated heating: coil(s) with large exchange surface area. • Inspection manhole ø 400 mm*: - Easy to maintain - Thermal equipment can be installed at a later date. • Significant water storage capacity to meet peaks in demand. • Water can be stored at a constant temperature of up to 99°C (depending on the model).

• Particularly suited for use with energy recovery (solar, heat pump) or production (solid or gaseous fuel boilers) systems. • Reduced greenhouse gas emissions. • Quick and easy to install: equipment delivered to site with pre-assembled insulation (for stainless steel cylinders only). Insulation can be easily removed if required. • Non-standard version available on request (cylinder with a single heater in the top section upon request). * Only for enamelled steel cylinders: manhole ø 400 mm for the 750 to 3,000 litres version (or handhole DN 110 mm for the 300 to 3,000 L version)

OPERATING PRINCIPLES

With one lower coil (solar) made of 316 L stainless steel Solar regulation

1 Solar panel 2 Solar module

9

2

3 Drain pipe 4 Immersion

1

5 5

heater (optional) Loop outlet and . return : available. nozzle

6 DN125 handhole 7 Loop return

6

Y

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

ADvantages

8 Cold water inlet 9 Distribution

4

7 2

8 3

With two coils lower (solar) and upper (primary backup) made of 316 L stainless steel Solar regulation 1 Solar panel 2 Solar

8

module

1

3 Backup 4 Storage 5 DN125

handhole

4

6 Loop return 7 Cold water

5

inlet

8 Distribution 3 6 7 2

61


OPERATING PRINCIPLES

With two coils lower and upper (solar) made of 316 L stainless steel - Use of one or two coils managed by a 3-way valve for better stratification. Solar regulation

8 1

M

4 T

T

5

3

6 7 2 1 Solar panel 2 Solar module

4 Storage 5 DN125 handhole

3 Stratification

6 Loop return

7 Cold water inlet 8 Distribution

With two coils lower and upper (solar) made of 316 L stainless steel - Mounting of coils in a series for maximum power.

Solar regulation

8 1

M

4 T

5

T

3

6 7 2

62

1 Solar panel 2 Solar module

4 Storage 5 DN125 handhole

3 Hydraulic connector

6 Loop return

7 Cold water inlet 8 Distribution


300 to 3,000 litres

SPECIFICATIOn

DPX Solar

Optimised connections

DUPLEX stainless steel

CE compliance • 97/23/CE

Reinforced thermal insulation

Tank

• Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • DN125 handhole.

Removable thermal insulation

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

“SOLAR DPX” DUPLEX STAINLESS STEEL range - Single coil

2

(including the bottom of the tank) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Coil exchanger made of 316 L stainless steel. Options • Back up electric immersion heater: - Electrical elements with Incoloy pins. - DN40 tapped cap up to 12 kW, M77 beyond that. - Three-phase voltage of 230/400 up to 24 kW, three-phase 400/400 V beyond that. - Immersion heater mounting: on the tank. - Temperature regulation: ° Electrical power ≤ 20 kW: 30 A Three-phase control safety box, 400V three-phase, fitted to the top of the immersion heater (double safety thermostat + cabled power contactor). ° Electrical power > 20 kW: Double unipolar safety thermostat. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank and coil = 7 years. • Other workstations = 1 year.

63


dimensionS With one solar coil made of 316 L stainless steel øD

EC

PM

TT

TM TP PS EF Cold water inlet

H

DA

DA Outlet/loop return EC Hot water outlet

M

J

TT

PI Support feet

G

PS

PM Threated nozzle for L

F

transportation/untapped tank

B

C

E

PS Nozzles for coil TM Nozzles for thermometer

EF

TP DN125 handhole TT Nozzles for thermostat (or

PT100 probe)

A

VD DN50 drainage PI

VD

Note: TM TM is

270°

EC VD

positioned at 90° on the 300 L version

DA EF TM TT DA PS

180°

TP

90°

J L M E F G A B C H øD Capacity (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

64

90 90 90 90 90 90 90 90

395 410 440 440 510 560 560 560

545 560 590 590 685 745 745 745

550 650 790 790 1 100 1 250 1 250 1 250

675 710 740 740 860 930 930 930

865 1 010 1 045 1 170 1 100 1 175 1 175 1 225

1 180 1 295 1 325 1 875 1 390 1 425 1 975 2 195

1 535 1 820 1 880 2 430 2 020 2 110 2 660 2 880

1 180 1 445 1 475 2 025 1 545 1 595 2 145 2 365

795 950 980 1 115 950 1 040 1 100 1 160

1 055 1 295 1 290 1 800 1 390 1 425 1 880 2 130

TM-TT (G int. thread) DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

EC-EF PS DA-VD (G-ext. Weight (G ext. thread) (kg) thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

DN25 DN25 DN25 DN25 DN40 DN40 DN40 DN40

105 145 195 240 340 460 500 550


25 25 25 25 40 40 40 40

1,1 1,8 2,3 2,8 3,4 4,1 5,1 5,1

Volume (l)

550 650 800 800 1 100 1 300 1 300 1 300

10 15 19 24 44 53 66 66

Other sources 80/60°C - 10/60°C Glycol water 30%

Solar S1 : 70/43,5°C-32,5°C - 25l/mc² S2 : 60/48°C-32,5°C - 40l/mc² Power (kW)

Δp (mbar)

Surface area solar panels(m2)

S1

S2

S1

S2

S1

S2

3,9 6,5 9,8 13 14,3 15,6 18,9 18,9

3,9 6,5 9,8 13 16,3 24,1 36,4 36,4

5 12 20 40 13 13 15 15

8 10 30 70 24 31 45 45

6 10 15 20 22 24 29 29

6 10 15 20 25 37 56 56

Flow rate (m3/h)

Power (kW)

Δp (mbar)

0,7 1,4 2,1 2,8 2,2 3 4,1 4,1

15 29 43 58 47 62 85 85

15 78 150 290 45 50 80 80

Note: 100 mbar = 1 meter of water column (1mWC)

MODELS AVAILABLE Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

M1 reference DSI030033M11 DSI050045M11 DSI075063M11 DSI100074M11 DSI150088M11 DSI200107M11 DSI250145M11 DSI300145M11

Cooling constant (Whr/day.K.L) 0.077 0.060 0.049 0.046 0.037 0.032 0.031 0.030

M0 reference DSI030033M01 DSI050045M01 DSI075063M01 DSI100074M01 DSI150088M01 DSI200107M01 DSI250145M01 DSI300145M01

Cooling constant (Whr/day.K.L) 0.091 0.072 0.058 0.054 0.044 0.038 0.036 0.035

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

300 500 750 1 000 1 500 2 000 2 500 3 000

DN

Surface area (m2)

Model

Diameter (mm)

TECHNICAL SPECIFICATIONS OF LOWER COIL

2

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

65


“SOLAR DPX” DUPLEX STAINLESS STEEL range - Dual coil 500 to 3,000 litres

SPECIFICATION

DPX Solar

Optimised connections

DUPLEX stainless steel

CE compliance • 97/23/CE

Tank

Reinforced thermal insulation

• Vertical «DPX» DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litre capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • DN125 handhole

Removable thermal insulation (including the bottom of the tank) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket

Coil exchangers made of 316 L stainless steel. Options • Back up electric immersion heater: - Electrical elements with Incoloy pins. - DN40 tapped cap up to 12 kW, M77 beyond that. - Three-phase voltage of 230/400 up to 24 kW, three phase 400/400 V beyond that. - Immersion heater mounting: on the tank. - Temperature regulation: ° Electrical power ≤ 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cabled power contactor). ° Electrical power ≤ 20 kW: Double unipolar safety thermostat. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank and coils = 7 years. • Other workstations = 1 year.

66


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

dimensionS øD

EC

TT

PS

TM PM TP PS

H

DA PS

F

M

G

N

J

TT

C

E

L

EC Hot water outlet PS

EF Cold water inlet DA Outlet/loop return

EF B

PI Support feet

2

PM Threated nozzle

for transportation/ untapped tank

A

PS Nozzles for coils PI

VD

TM Nozzles for

thermometer

TP DN125 handhole

270°

TT Nozzles for

EC VD

thermostat (or PT100 probe)

VD DN50 drainage DA EF TM TT PM PS

180°

TP

90°

EC-EF J L M N TM-TT (G DA-VD E F G A B C H øD Capacity (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) int. thread) (G ext. (litres) thread) 500 90 410 560 650 710 1 010 1 295 1 820 1 445 950 1 125 1 440 DN15 DN50 750 90 440 590 790 740 1 045 1 325 1 880 1 475 980 1 110 1 470 DN15 DN50 1 000 90 440 590 790 740 1 170 1 875 2 430 2 025 1 115 1 595 2 000 DN15 DN50 1 500 90 510 685 1 100 860 1 100 1 390 2 020 1 545 950 1 245 1 520 DN15 DN50 2 000 90 560 745 1 250 930 1 175 1 425 2 110 1 595 1 040 1 270 1 570 DN15 DN50 2 500 90 560 745 1 250 930 1 175 1 975 2 660 2 145 1 100 1 700 2 060 DN15 DN50 3 000 90 560 745 1 250 930 1 225 2 195 2 880 2 365 1 160 1 920 2 340 DN15 DN50

PS Weight (G ext. (kg) thread) DN25 DN25 DN25 DN40 DN40 DN40 DN40

145 195 240 340 460 500 550

67


TECHNICAL SPECIFICATIONS

Volume (l)

500 750 1 000 1 500 2 000 2 500 3 000

DN

Surface area (m2)

Model

Diameter (mm)

Lower coil

650 800 800 1 100 1 300 1 300 1 300

25 25 25 40 40 40 40

1,8 2,3 2,8 3,4 4,1 5,1 5,1

15 19 24 44 53 66 66

Solar S1 : 70/43,5°C-32,5°C - 25l/mc² S2 : 60/48°C-32,5°C - 40l/mc² Puissance Δp Surface area solar (kW) (mbar) panels (m2) S1 S2 S1 S2 S1 S2 6,5 6,5 12 10 10 10 9,8 9,8 20 30 15 15 13 13 40 70 20 20 14,3 16,3 13 24 22 25 15,6 24,1 13 31 24 37 18,9 36,4 15 45 29 56 18,9 36,4 15 45 29 56

Other sources 80/60°C - 10/60°C Glycol water 30% Δp Flow rate Power (mbar) (m3/h) (kW) 1,4 2,1 2,8 2,2 3,0 4,1 4,1

29 43 58 47 62 85 85

78 150 290 45 50 80 80

Note : 100 mbar = 1 meter of water column (1mWC)

650 800 800 1 100 1 300 1 300 1 300

25 25 25 40 40 40 40

Volume (l)

500 750 1 000 1 500 2 000 2 500 3 000

DN

Surface area (m2)

Model

Diameter (mm)

Upper coil Solar S1 : 70/43,5°C-32,5°C - 25l/mc² S2 : 60/48°C-32,5°C - 40l/mc² Puissance Δp Surface area solar (kW) (mbar) panels(m2)

1 1,7 1,7 2,1 3,1 3,1 3,1

8 14 14 27 40 40 40

3,3 4,9 5,9 6,5 8,5 8,5 8,5

S1

S2

S1

S2

S1

S2

3,3 4,9 5,9 6,5 13 13 13

4 9 14 4 5 5 5

6 14 22 6 11 11 11

5 7,5 9 10 13 13 13

5 7,5 9 10 20 20 20

Other sources 90/70°C - 10/55°C Flow rate (m3/h)

Power (kW)

Δp (mbar)

1,3 2,6 2,6 2,4 3,9 3,9 3,9

30 60 60 55 90 90 90

40 120 120 30 55 55 55

Note : 100 mbar = 1 meter of water column (1mWC)

Combined upper and lower coils (connected in a series)

650 800 800 1 100 1 300 1 300 1 300

25 25 25 40 40 40 40

Volume (l)

DN

Surface area (m2)

Model

Diameter (mm)

Solar S1 : 70/43,5°C-32,5°C - 25l/mc² S2 : 60/48°C-32,5°C - 40l/mc² Puissance (kW) S1 500 750 1 000 1 500 2 000 2 500 3 000

2,8 4,0 4,5 5,5 7,2 8,2 8,2

23 33 38 71 93 106 106

Note : 100 mbar = 1 meter of water column (1mWC)

68

S2

6,5 6,5 9,8 9,8 13 13 19,5 19,5 26 26 32,5 32,5 39 39

Δp (mbar)

Surface area solar panels(m2)

S1

S2

S1

S2

19 33 64 22 22 22 26

32 50 112 39 50 64 77

10 15 20 30 40 50 60

10 15 20 30 40 50 60

Other sources System 1 : 80/60°C - 10/40°C Glycol water 30% System 2 : 80/60°C - 10/60°C Glycol water 30% Δp Flow rate Power (mbar) (m3/h) (kW) S1

S2

4,1 2,6 6,2 4,1 7,6 5 7,2 4,4 9,1 5,7 11 6,9 12,9 8,2

S1

S2

S1

S2

85 55 560 300 130 85 1 450 720 160 105 2 500 1 200 150 92 300 150 190 120 380 180 230 145 650 290 270 172 900 400


Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

M1reference

Cooling constant (Whr/day.K.L)

M0 reference

Cooling constant (Whr/day.K.L)

DSD050045027M11 DSD075063044M11 DSD100074044M11 DSD150088055M11 DSD200107084M11 DSD250145084M11 DSD300145084M11

0.060 0.049 0.046 0.037 0.032 0.031 0.030

DSD050045027M01 DSD075063044M01 DSD100074044M01 DSD150088055M01 DSD200107084M01 DSD250145084M01 DSD300145084M01

0.072 0.058 0.054 0.044 0.038 0.036 0.035

OPTIONS Reference MSP25 MSP32 RSD6

KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

MODELS AVAILABLE

2

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

69


“SOLAR GLASS LINED” range Single coil 300 to 3,000 litres

SPECIFICATIOn

GL Solar

Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank). Note: Compliant with the recommendations of the Directorate-General for Health

Internal coating • Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation (including the inspection manhole and the bottom dished end) M1 - Euroclass B fire rated (λ = 0,037 W/m/K): • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K): • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Coil exchanger made of enamelled steel. Options • Electrical kits with immersion heating elements from 3 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 3 to 30 kW, depending on the capacity of the tanks. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

70


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

36

Dimensions ø2

ø2

ø 1/2

2 or 3 anodes according to model

C

B

ø2

G

H

F

E

D

ø2

2

K

L

I

øA

45° J

45°

ø2

Capacity (litres)

ØA (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

K (mm)

L (mm)

Weight with insulation (kg)

300

630

1386

1155

807

472

150

204

36

982

472

-

330

130

500

630

1983

1752

1 108

463

150

204

36

1 615

495

-

330

180

750

790

1891

1601

1 051

501

150

196

34

1 623

501

465

425

295

1 000

790

2244

1956

1 246

501

150

196

34

1 929

501

465

425

360

1 500

1100

2073

1700

1 150

600

200

221

32

1 722

600

620

580

500

2 000

1100

2261

1 885

1 244

600

200

221

32

1 722

600

620

580

535

2 500

1400

2136

1 680

1 180

680

200

216

31

1 587

650

730

730

680

3000

1400

2 269

1 808

1 245

680

200

216

31

1 587

650

730

730

700

71


TECHNICAL SPECIFICATIONS OF THE COIL 70/43,5°C-32,5°C 25l/m² useful ØA (mm)

Exchange surface area (m²)

300

630

500

Capacity (litres)

60/44,5°C-32,5°C 40l/m² useful

Surface area of solar panels (m²)

Power (kW)

Δp (mbar)

Surface area of solar panels (m²)

1,1

6,0

3,9

1,1

6,0

6,5

2,8

10,0

6,5

2,7

10,0

4

9,8

5,6

15,0

9,8

5,4

15,0

790

5,2

13,0

9,7

20,0

13,0

151,9

20,0

1 500

1 100

5,5

19,5

15,4

30,0

19,5

362,5

30,0

2 000

1 100

5,5

21,4

285,7

33,0

20,1

383,5

30,9

2 500

1 400

6

24,5

406,5

37,7

22,8

539,1

35,0

3 000

1 400

6

24,5

406,5

37,7

22,8

539,1

35,0

Power (kW)

Δp (mbar)

2

3,9

630

3

750

790

1 000

MODELS AVAILABLE Standard model with a 50 mm-M1 jacket Capacity (litres) 300

With ø 400 mm inspection manhole

With DN110 handhole

-

EMI030M1B

0,000260

-

With DN110 handhole

Cooling constant (kWh/24hr)

EMI030M0B

0,000167

500

-

EMI050M1B

0,000240

-

EMI050M0B

0,000148

750

EMI075M1V

EMI075M1B

0,000184

EMI075M0V

EMI075M0B

0,000123

1 000

EMI100M1V

EMI100M1B

0,000140

EMI100M0V

EMI100M0B

0,000108

1 500

EMI150M1V

EMI150M1B

0,000123

EMI150M0V

EMI150M0B

0,000096

2 000

EMI200M1V

EMI200M1B

0,000109

EMI200M0V

EMI200M0B

0,000085

2 500

EMI250M1V

EMI250M1B

0,000098

EMI250M0V

EMI250M0B

0,000077

3 000

EMI300M1V

EMI300M1B

0,000093

EMI300M0V

EMI300M0B

0,000073

Standard model with a 100 mm-M1 jacket Capacity (litres) 300

72

Standard model with a 50 mm-M0 jacket

With ø 400 mm Cooling constant inspection (kWh/24hr) manhole

Standard model with a 100 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

-

EMI030M11B

0,000153

-

EMI030M01B

0,000113

500

-

EMI050M11B

0,000132

-

EMI050M01B

0,000104

750

EMI075M11V

EMI075M11B

0,000101

EMI075M01V

EMI075M01B

0,000085

1 000

EMI100M11V

EMI100M11B

0,000090

EMI100M01V

EMI100M01B

0,000074

1 500

EMI150M11V

EMI150M11B

0,000076

EMI150M01V

EMI150M01B

0,000067

2 000

EMI200M11V

EMI200M11B

0,000062

EMI200M01V

EMI200M01B

0,000059

2 500

EMI250M11V

EMI250M11B

0,000059

EMI250M01V

EMI250M01B

0,000053

3 000

EMI300M11V

EMI300M11B

0,000052

EMI300M01V

EMI300M01B

0,000051


Reference

Description

MSP25 MSP32

Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels

RSD6

Differential solar regulator + 6 sensors

Electrical kits with immersion heating elements Reference Power (kW) Mounted on DN110 handhole

Mounted on ø 400 mm inspection manhole

KEB03B (from 300 to 3.000 litres)

-

3

KEB09B (from 300 to 3.000 litres)

KEB09V (from 750 to 3.000 litres)

9

KEB15B (from 300 to 3.000 litres)

KEB15V (from 750 to 3.000 litres)

15

KEB30B (from 300 to 3.000 litres)

KEB30V (from 750 to 3.000 litres)

30

-

KEB45V (from 750 to 3.000 litres)

45

-

KEB60V (from 750 to 3.000 litres)

60

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

options

2

Electrical kits with steatite heating elements Reference

Power (kW)

KES03 (from 750 to 3.000 litres)

3 (1x3kW)

KES06 (from 750 to 3.000 litres)

6 (2x3kW)

KES09 (from 750 to 3.000 litres)

9 (3x3kW)

KES12 (from 750 to 3.000 litres)

12 (4x3kW)

KES15 (from 750 to 3.000 litres)

15 (5x3kW)

KES18 (from 2500 to 3.000 litres)

18 (3x6kW)

KES24 (from 2500 to 3.000 litres)

24 (4x6kW)

KES30 (from 2500 to 3.000 litres)

30 (5x6kW)

73


“SOLAR GLASS LINED” range Dual coil 300 to 3,000 litres

SPECIFICATIOn

GL Solar

Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank). Note: Compliant with the recommendations of the Directorate-General for Health

Internal coating • Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation (including the inspection manhole and the bottom dished end) M1 - Euroclass B fire rated (λ = 0,037 W/m/K): • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K): • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Coil exchanger made of enamelled steel. Options • Electrical kits with immersion heating elements from 3 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 3 to 30 kW, depending on the capacity of the tanks. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

74


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

36

Dimensions ø2

ø2

ø 1/2

2 or 3 anodes according to model

ø2

C

B

ø 400

ø2

G

H

F

E

D

ø 110

2

1"1/2

M

L

K

J

N

I

øA

45°

45°

ø2

Weight with insulation (kg)

Capacity (litres)

ØA (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

K (mm)

L (mm)

300

630

1386

1155

807

472

150

204

36

1033

880

778

472

-

330

145

500

630

1983

1752

1108

472

150

204

36

1390

1033

931

472

-

330

175

750

790

1891

1601

1051

501

150

196

34

1623

1266

1164

501

465

425

290

1000

790

2244

1956

1246

501

150

196

34

1674

1317

1215

501

465

425

340

1500

1100

2073

1700

1150

600

200

221

32

1695

1722

1467

600

620

580

475

2000

1100

2261

1888

1244

600

200

221

32

1824

1467

1365

600

620

580

515

2500

1400

2136

1680

1180

680

200

216

31

1689

1434

1332

650

730

730

670

3000

1400

2263

1808

1250

680

200

216

31

1689

1434

1332

650

730

730

690

M (mm)

N (mm)

75


SPECIFICATIOn Lower coil 70/43,5°C-32,5°C 25l/m² useful ØA (mm)

Exchange surface area (m²)

300

630

500

Capacity (litres)

60/44,5°C-32,5°C 40l/m² useful Surface area of solar panels (m²)

Power (kW)

Δp (mbar)

Surface area of solar panels (m²)

0,4

3,7

2,2

0,4

3,4

3,2

0,7

5,0

3,0

0,6

4,6

1,9

4,3

1,2

6,7

3,9

1,1

6,0

790

2,4

6,0

2,0

9,2

5,5

1,9

8,5

1 500

1 100

2,5

6,2

2,2

9,5

5,7

2,0

8,8

2 000

1 100

2,5

6,2

2,2

9,5

5,7

2,0

8,8

2 500

1 400

2,5

6,1

2,2

9,4

5,6

1,9

8,6

3 000

1 400

2,5

6,1

2,2

9,4

5,6

1,9

8,6

Power (kW)

Δp (mbar)

1,2

2,4

630

1,5

750

790

1 000

Upper coil 70/43,5°C-32,5°C 25l/m² useful ØA (mm)

Exchange surface area (m²)

300

630

500

Capacity (litres)

60/44,5°C-32,5°C 40l/m² useful Surface area of solar panels (m²)

Power (kW)

Δp (mbar)

Surface area of solar panels (m²)

Power (kW)

Δp (mbar)

0,8

1,1

0,1

1,7

1,0

0,1

1,6

630

1,5

3,2

0,7

5,0

3,0

0,6

4,6

750

790

1,7

3,7

0,9

5,8

3,5

0,8

5,4

1 000

790

2,4

6,0

2,0

9,2

5,5

1,8

8,5

1 500

1 100

2,5

6,2

2,2

9,5

5,7

2,0

8,8

2 000

1 100

2,5

6,2

2,2

9,5

5,7

2,0

8,8

2 500

1 400

3

7,8

3,4

12,0

7,8

3,2

12,0

3 000

1 400

3

7,8

3,4

12,0

7,8

3,2

12,0

Combined upper and lower coils (connected in a series) 70/43,5°C-32,5°C 25l/m² useful ØA (mm)

Exchange surface area (m²)

300

630

500

Capacity (litres)

76

60/44,5°C-32,5°C 40l/m² useful Surface area of solar panels (m²)

Power (kW)

Δp (mbar)

0,6

3,0

2,0

0,2

3,0

3,3

1,4

5,0

3,3

0,7

5,0

3,6

4,9

2,5

7,5

4,9

1,1

7,5

790

4,8

6,5

4,5

10,0

6,5

2,1

10,0

1 500

1 100

5

9,8

7,0

15,0

9,8

3,4

15,0

2 000

1 100

5

11,6

8,3

17,9

12,3

4,2

19,0

2 500

1 400

5,5

12,1

9,5

18,6

12,9

87,1

19,9

3 000

1 400

5,5

12,1

9,5

18,6

12,9

87,1

19,9

Power (kW)

Δp (mbar)

2

2,0

630

3

750

790

1 000

Surface area of solar panels (m²)


Standard model with a 100 mm-M1 jacket Capacity (litres)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

Standard model with a 100 mm-M0 jacket With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

300

-

EMD030M11B

0,000153

-

EMD030M01B

0,000113

500

-

EMD050M11B

0,000132

-

EMD050M01B

0,000104

750

EMD075M11V

EMD075M11B

0,000101

EMD075M01V

EMD075M01B

0,000085

1 000

EMD100M11V

EMD100M11B

0,000090

EMD100M01V

EMD100M01B

0,000074

1 500

EMD150M11V

EMD150M11B

0,000076

EMD150M01V

EMD150M01B

0,000067

2 000

EMD200M11V

EMD200M11B

0,000062

EMD200M01V

EMD200M01B

0,000059

2 500

EMD250M11V

EMD250M11B

0,000059

EMD250M01V

EMD250M01B

0,000053

3 000

EMD300M11V

EMD300M11B

0,000052

EMD300M01V

EMD300M01B

0,000051

options Reference

Description

MSP25 MSP32

Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels

RSD6

Differential solar regulator + 6 sensors

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

MODELS AVAILABLE

2

Electrical kits with immersion heating elements Reference Mounted on DN110 handhole

Mounted on ø 400 mm inspection manhole

Power (kW)

KEB03B (from 300 to 3.000 litres)

-

3

KEB09B (from 300 to 3.000 litres)

KEB09V (from 750 to 3.000 litres)

9

KEB15B (from 300 to 3.000 litres)

KEB15V (from 750 to 3.000 litres)

15

KEB30B (from 300 to 3.000 litres)

KEB30V (from 750 to 3.000 litres)

30

-

KEB45V (from 750 to 3.000 litres)

45

-

KEB60V (from 750 to 3.000 litres)

60

Electrical kits with steatite heating elements Reference

Power (kW)

KES03 (from 750 to 3.000 litres)

3 (1x3kW)

KES06 (from 750 to 3.000 litres)

6 (2x3kW)

KES09 (from 750 to 3.000 litres)

9 (3x3kW)

KES12 (from 750 to 3.000 litres)

12 (4x3kW)

KES15 (from 750 to 3.000 litres)

15 (5x3kW)

KES18 (from 2500 to 3.000 litres)

18 (3x6kW)

KES24 (from 2500 to 3.000 litres)

24 (4x6kW)

KES30 (from 2500 to 3.000 litres)

30 (5x6kW)

77


SOLAR DHW CYLINDER SOLAR AND/OR PRIMARY HEATERS 500 to

3, 000

litres

Thanks to the removable U-tube heaters, solar DHW boilers represent an upgradeable and easy to maintain solution suitable for use with all types of energy. They have been specifically designed to meet solar domestic hot water production and storage needs (collection and backup) in the service and manufacturing sectors. The lower exchanger (solar U-tube heater) heats the device from a renewable energy source (solar,. heat pump, etc.). If necessary, a second exchanger positioned in the top section (primary U-tube heater) can provide additional energy via a heat generator. Designed in accordance with CODAP and incorporating more than 60 years of experience in the field of storage tank production, these cylinders meet the demands of EN13445 and CE standards.

78


• Multi-purpose: - Heating possible from any energy source. - Simultaneous feeding of multiple consumer circuits. • Easy to maintain: removable heaters. • Upgradeable equipment: thermal equipment mounted on manholes can be easily replaced (power or energy changes). • Significant water storage capacity, to meet peaks in demands. • Water can be stored at a constant temperature of up to 95°C (depending on the model).

• Particularly suited for use with solar energy recovery systems, heat pumps and solid or gaseous fuel boilers. • Non-standard versions are available on request. • Reduced greenhouse gas emissions. • Multiple nozzles (hydraulic loops, attaching control equipment, regulation and safety accessories). • Delivered to site with pre-assembled insulation and thermal backup system (can be easily removed if required).

OPERATING PRINCIPLE

6

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

ADvantages

2 Solar regulation

7 5

18

13

14 12 90° C

Y

4

9

70° C

10

16

11

3

2

8

17 15

1 1 Cold water inlet 2 Solar heater 3 Solar station 4 Expansion vessel 5 PSolar panel 6 Sunlight sensor

7 Solar panel temperature

sensor 8 Temperature sensor located at the bottom of the solar cylinder 9 Loop return 10 Primary heater

11 Gas boiler 12 Electrical backup 13 DHW tank 14 DHW outlet 15 Drainage outlet 16 Solar panel return temperature sensor 17 Cold water inlet temperature sensor

79


“SOLAR PREFERENCE” range 500 to 3, 000 litres - Primary heater

SPECIFICATION

RC Solar

Optimised connections

CE compliance Cylinder with • 97/23/CE ¨RC¨ coated carbon steel Tank tank • Vertical carbon steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manholes(1).

Reinforced thermal insulation

Note: Compliant with the recommendations of the Directorate-General for Health. .

(1)

Internal coating

• Finished with “RC851” coating (Maximum temp = 85°C constant) or "RC951" coating (T-max = 95°C at peak times) WRAS approved material • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom dished end)

M1 fire rated :

• High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated : • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Primary U-tube heater

• Removable U-tube heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Inlet/outlet DN32F or DN50F + DN8F purge. • Primary = 90/70°C. • Secondary = 10/60°C. • Δ p ≤ 0,25 mWC. • Class B heater, compliant with article 16.9 of the health regulations.

Options

• Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • U-tube heater = 5 years. • Other workstations = 1 year 80

Inspection manholes

High resistance U-tube heaters


øD

EC

DA

TG

AN1 Threaded nozzle 40/49 for anode

RP TO

DA Outlet/loop return EC Hot water outlet

DA

EF Cold water inlet PI Support feet RP U-tube heater

H

AN1 TG

TG Threaded nozzles for thermometer

F

and thermostat

TO Manhole with an internal diameter.

of 400 mm

VM Threaded drainage outlet

G

C

E1

J

K

TO DA

B

EF

Ø 1100 et 1300 mm

VM

2

A

PI

180°

Ø 800 mm

EC VM

180°

DA

AN1 DA EF TG

90°

EC VM AN1 DA EF TG

DA

270°

300°

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS

90°

270°

RP TO 45°

60°

315° 0°

RP TO TG

TG

TO

TO

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

TG (G int. thread) EC-EF (G int. thread) / DA-VM (G ext. thread) Weight (kg) DN15 DN50 250 DN15 DN50 290 DN15 DN50 320 DN15 DN50 350 DN15 DN50 380 DN15 DN50 420 DN15 DN50 480 DN15 DN50 540 DN15 DN50 560 DN15 DN50 590

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

A (mm) 90 90 90 90 90 90 90 90 90 90

(1)

B (mm) 410 440 440 475 475 510 510 560 560 560

C (mm) 510 540 630 575 665 610 700 660 700 750

øD (mm) E1 (mm) 650 925 800 955 800 955 950 990 950 990 1 100 1 025 1 100 1 025 1 300 1 075 1 300 1 075 1 300 1 075

F (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120

G (mm) 660 690 690 725 725 760 760 810 810 810

H (mm) 1  760 1  820 2  370 1  890 2  440 1  960 2  510 2  060 2  310 2  610

J (mm) 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450

K (mm) 1 130 1 160 1 540 1 195 1 575 1 230 1 610 1 280 1 460 1 660

Note : H = High version ; B = Low version.

81


TECHNICAL SPECIFICATIONS Primary heater (backup) Primary = 90/70°C – Secondary 10/60°C Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Backup heater Power (kW) 12 25 25 25 34 34 58 58 58 58

Inlet/outlet nozzle DN32 DN32 DN32 DN32 DN32 DN32 DN32 DN32 DN32 DN32

Flow rate m3/h

Head loss (mWC)(2)

Surface area (m2)

0,5 1,1 1,1 1,1 1,5 1,5 2,5 2,5 2,5 2,5

0,1 0,15 0,15 0,15 0,2 0,2 0,35 0,45 0,45 0,45

0,54 0,98 0,98 0,98 1,8 1,33 2,5 2 2 2

Note : H = High version ; B = Low version. mWC = Meter of water column

(1) (2)

MODELS AVAILABLE Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Standard model with a 100 mm-M1 jacket Cooling constant Tank 95°C (Wh/day.K.L) PLP050M11V PSP050M11V 0.060 PLP075M11V PSP075M11V 0.049 PLP100M11HV PSP100M11HV 0.046 PLP100M11BV PSP100M11BV 0.042 PLP150M11HV PSP150M11HV 0.039 PLP150M11BV PSP150M11BV 0.037 PLP200M11HV PSP200M11HV 0.034 PLP200M11BV PSP200M11BV 0.032 PLP250M11V PSP250M11V 0.031 PLP300M11V PSP300M11V 0.030 Tank 85°C

Standard model with a 100 mm-M0 jacket Cooling constant Tank 95°C (Wh/day.K.L) PLP050M01V PSP050M01V 0.072 PLP075M01V PSP075M01V 0.058 PLP100M01HV PSP100M01HV 0.054 PLP100M01BV PSP100M01BV 0.050 PLP150M01HV PSP150M01HV 0.046 PLP150M01BV PSP150M01BV 0.044 PLP200M01HV PSP200M01HV 0.041 PLP200M01BV PSP200M01BV 0.038 PLP250M01V PSP250M01V 0.036 PLP300M01V PSP300M01V 0.035 Tank 85°C

Note : H = High version ; B = Low version.

(1)

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-mounted onto the cylinder

82


500 to 3,000 litres - Primary heater

SPECIFICATION

DPX Solar

Optimised connections

DUPLEX CE compliance stainless steel • 97/23/CE

Tank

• Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manholes(1). • T-max = 95°C constant. Note : Compliant with the recommendations of the Directorate-General for Health.

(1)

Reinforced thermal insulation

Inspection manholes

High resistance U-tube heaters

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

“SOLAR DPX” DUPLEX STAINLESS STEEL range

2

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated : • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated : • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Primary U-tube heater • Removable U-tube heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Inlet/outlet DN32F or DN50F + DN8F purge. • Primary = 90/70°C. • Secondary = 10/60°C. • Δp ≤ 0,25 mWc. • Class B heater, compliant with article 16.9 of the health regulations.

Options • Tank made of AISI 316L stainless steel. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve).

Warranties (in accordance with our general conditions of sale) •T  ank = 7 years. • U-tube heater = 5 years. • Other workstations = 1 year.

83


DIMENSIONS øD

EC

TT

DA

TM DA Outlet/loop return

DA

EC Hot water outlet TH

EF Cold water inlet / Solar exchanger outlet

H

RP

PI Support feet

TT

TH Manhole with an internal diameter.

J

K

DA

L

RP U-tube heater (backup)

G

M

of 400 mm

F

TM Nozzle for thermometer E

TT Nozzles for thermostat (or PT100 probe)

VM

Ø 1250 mm

VM DN50 drainage

A

PI

B

EF

Ø 800 et 1100 mm

270°

EC VM

270°

DA

EC VM

DA EF TM TT

DA DA EF TM TT

TH

180°

TH

140°

180°

45°

135°

40°

90°

RP TH

RP TH

90°

Ø 650 mm 270°

EC VM

DA

500 750 1 000 1 500 2 000 2 500 3 000

TM-TT (G int. thread) DN15 DN15 DN15 DN15 DN15 DN15 DN15

Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

A (mm) 90 90 90 90 90 90 90

Capacity (litres)

84

B (mm) 410 440 440 510 560 560 560

EC-EF-DA-VM (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 ØD (mm) 650 790 790 1 100 1 250 1 250 1 250

Weight (kg) 120 135 155 225 265 335 355

E (mm) 560 590 590 685 745 745 745

F (mm) 660 690 690 760 810 810 810

DA EF TM TT

TH 180°

135° 90°

G (mm) H (mm) J (mm) 1 820 1 030 1 295 1 880 1 060 1 325 2 430 1 390 1 875 2 020 1 130 1 390 2 110 1 180 1 425 2 660 1 510 1 975 2 880 1 640 2 195

60°

RP TH

K (mm) 1 420 1 450 2 000 1 520 1 570 2 120 2 340

L (mm) M (mm) 1 445 1 130 1 475 1 160 2 025 1 600 1 545 1 230 1 595 1 280 2 145 1 660 2 365 1 860


Primary heater (backup) Primary = 90/70°C – Secondary 10/60°C Capacity (litres)

Backup heater Power (kW)

Inlet/outlet nozzle

12 25 25 34 58 58 58

DN32 DN32 DN32 DN32 DN32 DN32 DN32

500 750 1 000 1 500 2 000 2 500 3 000

Flow rate m3/h 0,5 1,1 1,1 1,5 2,5 2,5 2,5

Head loss (mWC)(1) Surface area (m2) 0,1 0,15 0,15 0,2 0,45 0,45 0,45

0,54 0,98 0,98 1,33 2 2 2

mWC = Meter of water column

(1)

MODELS AVAILABLE Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Standard model with a 100 mm-M1 jacket DSP050M11V DSP075M11V DSP100M11V DSP150M11V DSP200M11V DSP250M11V DSP300M11V

Cooling constant (Wh/day.K.L) 0.060 0.049 0.046 0.037 0.032 0.031 0.030

Standard model with a 100 mm-M0 jacket DSP050M01V DSP075M01V DSP100M01V DSP150M01V DSP200M01V DSP250M01V DSP300M01V

Cooling constant (Wh/day.K.L) 0.072 0.058 0.054 0.044 0.038 0.036 0.035

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

TECHNICAL SPECIFICATIONS

2

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

85


“SOLAR PREFERENCE” range 500 to 3,000 litres - Solar heater

SPECIFICATION

RC Solar

Optimised connections

CE compliance • 97/23/CE

Tank

Cylinder with ¨RC¨ coated carbon steel tank

• Vertical carbon steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manhole(1). Note :Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating

• Finished with “RC851” coating (Maximum temp = 85°C constant) or "RC951" coating (T-max = 95°C at peak times) WRAS approved material • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated : •High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated : • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Solar U-tube heater

• Removable U-tube heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Inlet/outlet DN32F or DN50F + DN8F purge. • Δp ≤ 0,25 m mWC. • Class B heater, compliant with article 16.9 of the health regulations.

Options

• Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • U-tube heater = 5 years. • Other workstations = 1 year.

86

Reinforced thermal insulation

Inspection manhole

High resistance U-tube heater


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS øD

EC

TM DA

TT

AN1

RE H

DA AN1 Threaded nozzle 40/49 for

anode

J

TT

DA Outlet/loop return

EF G1

EC Hot water outlet EF Cold water inlet

E

F

PI Support feet

C B

EF

RE Solar U-tube heater TH Manhole with an internal

2

diameter of 400 mm

TM Nozzle for thermometer A

PI

TT Nozzles for thermostat (or

VM

PT100 probe)

VM Threaded drainage outlet 180°

EC VM

DA EF TT

EF DA

90°

270°

AN1 RE TM TH

315° 0°

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

A (mm) 90 90 90 90 90 90 90 90 90 90

B (mm) 410 440 440 475 475 510 510 560 560 560

C (mm) 560 590 590 650 650 685 685 745 745 745

øD (mm) 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300

E (mm) 660 690 690 725 725 760 760 810 810 810

Capacity (litres)

TM-TT (G int. thread)

500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

F (mm) 860 890 890 925 925 960 960 1 010 1 010 1 010

G (mm) 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450

EC-EF (G int. thread)/ Weight DA-VM (kg) (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 H (mm) 1 820 1 880 2 430 1 960 2 510 2 020 2 570 2 110 2 350 2 660

140 175 210 235 280 290 345 400 430 470 J (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120

Note : H = High version ; B = Low version.

(1)

87


TECHNICAL SPECIFICATIONS Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Solar heater Power (kW) Inlet/outlet nozzle 16 DN32 30 DN32 30 DN32 30 DN32 40 DN65 40 DN32 60 DN32 60 DN65 80 DN65 80 DN65

Flow rate m3/h

Head loss (mWC)(2)

Surface area (m2)

1,1 2 2 2 2,7 2,7 4 4 5,2 5,2

0,1 0,15 0,15 0,15 0,3 0,15 0,7 0,15 0,3 0,3

1 1,8 1,8 1,8 3,3 2,45 3 5,1 5,1 5,1

Note : H = High version ; B = Low version. mWC = Meter of water column

(1) (2)

MODELS AVAILABLE Standard model with a 100 mm-M1 jacket

Capacity (litres)

Tank 85°C

500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

PLS050M11V PLS075M11V PLS100M11HV PLS100M11BV PLS150M11HV PLS150M11BV PLS200M11HV PLS200M11BV PLS250M11V PLS300M11V

Standard model with a 100 mm-M0 jacket

Tank 95°C

Cooling constant (Wh/day.K.L)

Tank 85°C

Tank 95°C

Cooling constant (Wh/day.K.L)

PSS050M11V PSS075M11V PSS100M11HV PSS100M11BV PSS150M11HV PSS150M11BV PSS200M11HV PSS200M11BV PSS250M11V PSS300M11V

0.060 0.049 0.046 0.042 0.039 0.037 0.034 0.032 0.031 0.030

PLS050M01V PLS075M01V PLS100M01HV PLS100M01BV PLS150M01HV PLS150M01BV PLS200M01HV PLS200M01BV PLS250M01V PLS300M01V

PSS050M01V PSS075M01V PSS100M01HV PSS100M01BV PSS150M01HV PSS150M01BV PSS200M01HV PSS200M01BV PSS250M01V PSS300M01V

0.072 0.058 0.054 0.050 0.046 0.044 0.041 0.038 0.036 0.035

Note: H = High version ; B = Low version..

(1)

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note: Integrated loop heater is not pre-assembled onto the cylinder.

88


SPECIFICATION

DPX Solar

Optimised connections

DUPLEX CE compliance stainless steel • 97/23/CE

Tank • Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manhole(1). • T-max = 95°C constant.

Reinforced thermal insulation

Inspection manhole

High resistance U-tube heater

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

“SOLAR DPX” DUPLEX STAINLESS STEEL range 500 to 3,000 - Solar heater

2

Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket

Solar U-tube heater • Removable U-tube heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Inlet/outlet DN32F or DN50F + DN8F purge. • Δp ≤ 0,25 mWC. • Class B heater, compliant with article 16.9 of the health regulations.

Options • Tank made of AISI 316L stainless steel. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve).

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • U-tube heater = 5 years. • Other workstations = 1 year

89


DIMENSIONS øD

EC

TT

DA

TH TM

RE

H

DA TT

EF Cold water inlet /

Solar exchanger outlet

G

J

EF

L

K

DA Outlet/loop return

E’

EC hot water outlet

E

F

PI Support feet

B

EF

RE U-tube heater TH Manhole with an

internal diameter of 400 mm

TM Nozzles for

A

thermometer

VD

PI

TT Nozzles for

thermostat (or PT100 probe)

VD DN50 drainage RE

270°

EC VD

DA EF TM TT

DA EF

180°

TM-TT EC-EF-DA-VD Weight Capacity (kg) (litres) (G int. thread) (G ext. thread)

90°

Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

90

TH

500 750 1 000 1 500 2 000 2 500 3 000

A (mm) B (mm) øD (mm) E (mm) E’ (mm) F (mm) 650 90 410 560 860 660 790 90 440 590 890 690 790 90 440 590 890 690 1 100 90 510 685 960 760 1 250 90 560 745 1 010 810 1 250 90 560 745 1 010 810 1 250 90 560 745 1 010 810

G (mm) 1 030 1 060 1 390 1 130 1 180 1 510 1 640

DN15 DN15 DN15 DN15 DN15 DN15 DN15

H (mm) 1 820 1 880 2 430 2 020 2 110 2 660 2 880

DN50 DN50 DN50 DN50 DN50 DN50 DN50

J (mm) 1 295 1 325 1 875 1 390 1 425 1 975 2 195

K (mm) 1 420 1 450 2 000 1 520 1 570 2 120 2 340

140 175 210 290 400 430 470

L (mm) 1 445 1 475 2 025 1 545 1 595 2 145 2 365


Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Pu (kW) 16 30 30 40 60 80 80

Solar heater Piquage E/S DN32 DN32 DN32 DN32 DN65 DN65 DN65

Flow rate m3/h

Head loss (mWC)(1)

Surface area (m2)

1,1 2 2 2,7 4 5,2 5,2

0,1 0,15 0,15 0,15 0,15 0,3 0,3

1 1,8 1,8 2,45 5,1 5,1 5,1

Note: mWC = Meter of water column

1)

MODELS AVAILABLE Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Standard model with a 100 mm-M1 jacket DSS050M11V DSS075M11V DSS100M11V DSS150M11V DSS200M11V DSS250M11V DSS300M11V

Cooling constant (Wh/day.K.L) 0.060 0.049 0.046 0.037 0.032 0.031 0.030

RStandard model with a 100 mm-M0 jacket DSS050M01V DSS075M01V DSS100M01V DSS150M01V DSS200M01V DSS250M01V DSS300M01V

Cooling constant (Wh/day.K.L) 0.072 0.058 0.054 0.044 0.038 0.036 0.035

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

TECHNICAL SPECIFICATIONS

2

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note: Integrated loop heater is not pre-assembled onto the cylinder.

91


“SOLAR PREFERENCE” range

500 to 3,000 litres - Solar and primary U-tube heaters

SPECIFICATION

RC Solar

Optimised connections

CE compliance • 97/23/CE

Tank

Cylinder with «RC» coated carbon steel tank

Reinforced thermal insulation

Inspection manholes

• Vertical carbon steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manholes(1).

Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating • Finished with “RC851” coating or "RC951" coating (T-max = 95°C at peak times)

WRAS approved material • Magnesium protection anode(s) with wear indicator.

Removable thermal insulation • Anti-rust paint.

Removable thermal insulation (including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Solar and primary U-tube heaters • Removable U-tube heaters with bundle made of 316 L stainless steel, fixed onto the inspection manholes. • Inlet/outlet DN32F or DN50F + DN8F purge. • Δp ≤ 0,25 mWC. • Class B heaters, compliant with article 16.9 of the health regulations.

Options • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • U-tube heaters = 5 years. • Other workstations = 1 year

92

High resistance U-tube heaters


øD

EC

TG DA AN1 Threaded nozzle 40/49 for anode DA Outlet/loop return EF Cold water inlet

RP TO

EC Hot water outlet

DA

PI Support feet RS Solar U-tube heater RP Primary U-tube heater (backup)

H

AN1

TG Threaded nozzles for thermometer

TG

and thermostat

TO Manhole with an internal diameter

of 400 mm

F

RS TO

VM Threaded drainage outlet

C

G

E1

J

K

DA

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS

2

B

EF

Ø 650 and 800 mm VM

A

180°

PI

DA

RP TO

EC VM AN1 DA EF TG

90°

270°

Ø 1100 and 1300 mm 180°

EC VM

315°

45°

TG

DA

RS TO

AN1 DA EF TG

90°

60°

500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

300°

RP TO TG

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Capacity (litres)

270°

A (mm) 90 90 90 90 90 90 90 90 90 90

RS TO

B (mm) 410 440 440 475 475 510 510 560 560 560

C (mm) 510 540 630 575 665 610 700 660 700 750

ØD (mm) 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300

E (mm) 925 955 955 990 990 1 025 1 025 1 075 1 075 1 075

F (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120

EC-EF TG (G int. (G int. thread) Weight thread) / DA-VM (kg) (G ext. thread) DN15 DN50 250 DN15 DN50 290 DN15 DN50 320 DN15 DN50 350 DN15 DN50 380 DN15 DN50 420 DN15 DN50 480 DN15 DN50 540 DN15 DN50 560 DN15 DN50 590

G (mm) 660 690 690 725 725 760 760 810 810 810

H (mm) 1 760 1 820 2 370 1 890 2 440 1 960 2 510 2 060 2 310 2 610

J (mm) 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450

K (mm) 1 130 1 160 1 540 1 195 1 575 1 230 1 610 1 280 1 460 1 660

Note : H = High version ; B = Low version

(1)

93


TECHNICAL SPECIFICATIONS Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Solar heater Power (kW) Inlet/outlet nozzle 16 DN32 30 DN32 30 DN32 30 DN32 40 DN65 40 DN32 60 DN32 60 DN65 80 DN65 80 DN65

Flow rate m3/h

Head loss (mWC)(2)

Surface area (m2)

1,1 2 2 2 2,7 2,7 4 4 5,2 5,2

0,1 0,15 0,15 0,15 0,3 0,15 0,7 0,15 0,3 0,3

1 1,8 1,8 1,8 3,3 2,45 3 5,1 5,1 5,1

Flow rate m3/h

Head loss (mWC)(2)

Surface area (m2)

0,5 1,1 1,1 1,1 1,5 1,5 2,5 2,5 2,5 2,5

0,1 0,15 0,15 0,15 0,2 0,2 0,35 0,45 0,45 0,45

0,54 0,98 0,98 0,98 1,8 1,33 2,5 2 2 2

Note: H = High version ; B = Low version. mWC = Meter of water column

(1) (2)

Primary heater (backup) Primary = 90/70°C – Secondary 10/60°C Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Backup heater Power (kW) Inlet/outlet nozzle 12 DN32 25 DN32 25 DN32 25 DN32 34 DN32 34 DN32 58 DN32 58 DN32 58 DN32 58 DN32

Note: H = High version ; B = Low version mWC = Meter of water column

(1) (2)

MODELS AVAILABLE Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Standard model with a 100 mm-M1 jacket Cooling constant Tank 85°C Tank 95°C (Wh/day.K.L) PLM050M11V PSM050M11V 0.060 PLM075M11V PSM075M11V 0.049 PLM100M11HV PSM100M11HV 0.046 PLM100M11BV PSM100M11BV 0.042 PLM150M11HV PSM150M11HV 0.039 PLM150M11BV PSM150M11BV 0.037 PLM200M11HV PSM200M11HV 0.034 PLM200M11BV PSM200M11BV 0.032 PLM250M11V PSM250M11V 0.031 PLM300M11V PSM300M11V 0.030

Standard model with a 100 mm-M0 jacket Cooling constant Tank 85°C Tank 95°C (Wh day.K.L) PLM050M01V PSM050M01V 0.072 PLM075M01V PSM075M01V 0.058 PLM100M01HV PSM100M01HV 0.054 PLM100M01BV PSM100M01BV 0.050 PLM150M01HV PSM150M01HV 0.046 PLM150M01BV PSM150M01BV 0.044 PLM200M01HV PSM200M01HV 0.041 PLM200M01BV PSM200M01BV 0.038 PLM250M01V PSM250M01V 0.036 PLM300M01V PSM300M01V 0.035

Note: H = High version ; B = Low version.

(1)

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note: Integrated loop heater is not pre-assembled onto the cylinder

94


500 to 3,000 litres - Solar and primary U-tube heaters

SPECIFICATION

DPX Solar

Optimised connections

DUPLEX CE compliance stainless steel • 97/23/CE

Reinforced thermal insulation

Tank • Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manholes(1). • T-max = 95°C constant.

Inspection manholes

High resistance U-tube heaters

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

“SOLAR DPX” DUPLEX STAINLESS STEEL range

2

Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Solar and primary U-tube heaters • Removable U-tube heaters with bundle made of 316 L stainless steel, fixed onto the inspection manholes. • Inlet/outlet DN32F or DN50F + DN8F purge. • Δp ≤ 0,25 mWC. • Class B heaters, compliant with article 16.9 of the health regulations.

Options • Tank made of AISI 316L stainless steel. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve).

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • U-tube heater = 5 years. • Other workstations = 1 year

95


DIMENSIONS øD

EC DA Outlet/loop return DA

EF Cold water inlet

TT

EC Hot water outlet

TM

PI Support feet RP Primary U-tube heater

DA

(backup)

RS Solar U-tube heater RS

TH Manhole with an internal

diameter of 400 mm

H

RP

TM Nozzles for thermometer

TT K

L

TT Nozzles for thermostat (or

PT100 probe)

J

DA

E

F

G

M

VD DN50 drainage

VM

Ø 1250 mm

A

PI

B

EF

Ø 800 and 1100 mm

270°

270°

EC VD

EC VD

DA

DA DA EF TM TT

DA EF TM TT RS TH 180°

180°

RS TH 45°

40°

140° 90°

135°

RP TH

RP TH

Ø 650 mm Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

96

270°

EC VD

TM-TT (G int. thread)

EC-EF-DAVM (G ext. thread)

Weight (kg

DN15 DN15 DN15 DN15 DN15 DN15 DN15

DN50 DN50 DN50 DN50 DN50 DN50 DN50

120 135 155 225 265 335 355

Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

90°

DA DA EF TM TT

RS TH

A (mm) B (mm) ØD (mm) E (mm) 650 90 410 560 790 90 440 590 790 90 440 590 1 100 90 510 685 1 250 90 560 745 1 250 90 560 745 1 250 90 560 745

180°

135°

60° 90°

F (mm) 660 690 690 760 810 810 810

G (mm) H (mm) J (mm) 1 820 1 030 1 295 1 880 1 060 1 325 2 430 1 390 1 875 2 020 1 130 1 390 2 110 1 180 1 425 2 660 1 510 1 975 2 880 1 640 2 195

RP TH

K (mm) 1 420 1 450 2 000 1 520 1 570 2 120 2 340

L (mm) M (mm) 1 445 1 130 1 475 1 160 2 025 1 600 1 545 1 230 1 595 1 280 2 145 1 660 2 365 1 860


Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Solar heater Power (kW) Inlet/outlet nozzle 16 DN32 30 DN32 30 DN32 40 DN32 60 DN65 80 DN65 80 DN65

Flow rate m3/h

Head loss (mWC)(1)

Surface area (m2)

1,1 2 2 2,7 4 5,2 5,2

0,1 0,15 0,15 0,15 0,15 0,3 0,3

1 1,8 1,8 2,45 5,1 5,1 5,1

Flow rate m3/h

Head loss (mWC)(1)

Surface area (m2)

0,5 1,1 1,1 1,5 2,5 2,5 2,5

0,1 0,15 0,15 0,2 0,45 0,45 0,45

0,54 0,98 0,98 1,33 2 2 2

mWC = Meter of water column

(1)

Primary heater (backup) Primary = 90/70°C – Secondary 10/60°C Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Backup heater Power (kW) Inlet/outlet nozzle 12 DN32 25 DN32 25 DN32 34 DN32 58 DN32 58 DN32 58 DN32

mWC = Meter of water column

(1)

2

MODELS AVAILABLE Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

Standard model with a 100 mm-M1 jacket DSM050M11V DSM075M11V DSM100M11V DSM150M11V DSM200M11V DSM250M11V DSM300M11V

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

TECHNICAL SPECIFICATIONS

Cooling constant (Wh/day.K.L) 0.060 0.049 0.046 0.037 0.032 0.031 0.030

Standard model with a 100 mm-M0 jacket DSM050M01V DSM075M01V DSM100M01V DSM150M01V DSM200M01V DSM250M01V DSM300M01V

Cooling constant (Wh/day.K.L) 0.072 0.058 0.054 0.044 0.038 0.036 0.035

OPTIONS Reference MSP25 MSP32 RSD6

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors

KA1

Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note: Integrated loop heater is not pre-assembled onto the cylinder.

97


Dual energy HYDROGAZ

®

SOLAR DHW CYLINDER (SOLAR-GAS) 1 000 to  3,000

Litres

Thanks to the combination of a removable U-tube heater and a high-efficiency monobloc gas device, HYDROGAZ® cylinders represent an ideal dual energy solution to meet RT2012 requirements. They have been specifically designed to meet solar domestic hot water production and storage needs (collection and backup) in the service and manufacturing sectors. Designed in accordance with CODAP and incorporating more than 60 years of experience in the field of storage tank production, these cylinders meet the demands of EN13445 and CE standards.

ADVANTAGES • Maximum continuous efficiency, thanks to a Hydrogaz® flue gases/liquid exchanger working at maximum power (efficiency = 98% to 92% on NCV). • Up to 109% efficiency on NCV when combined with a TRANSECO flue gases energy recovery device. • Control of energy costs: - Reduced gas bills (burner power is less than with an instant production system). - Energy savings of at least 30% compared with centralised solutions. • Reduced gas line costs (smaller pipes than with an instant production system). • Space saving and offers reduced implementation costs compared with a classic solution (cylinder + boiler + exchanger). • Peak clipping. • Temperature stability for distributed water (even with significant variations in flow rates). • Possibility of heating water up to a constant temperature of 95°C (depending on the model).

98

• Hydrogaz® exchanger unit in stainless steel and removable burner (CE certified), enabling easy maintenance and increase in power should requirements change. • Auto-compensating combustion chamber guaranteeing increased longevity. • Can be operated with a sealed flue system (up to 60 kW of useful energy), therefore meaning that the device can be used in a chimney-less space. • Use of a premium branded power burner (low CO and NOx emissions), renowned for its reliability. • Device works with all types of gas and at any pressure. • Outdoors installation possible (no need for technical premises). • Equipment is supplied pre-assembled, ready to use (minimal hydraulic connection), with a burner with integrated control (easy to operate)


Solar regulation

6

Differential thermostat

7 5

17 10

11 19 12

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

OPERATING PRINCIPLE

Y 4

9

18

2

13

15

3

2

8

16 1

1 Cold water inlet 2 Solar heater 3 Solar station 4 Expansion vessel 5 Solar panel 6 Sunlight sensor

7 Solar panel temperature

sensor 8 Temperature sensor located at the bottom of the solar cylinder 9 Loop return 10 DHW tank

The tank works at mains pressure, to which it is connected at the bottom via safety mechanisms. The solar exchanger located in the lower section of the cylinder allows the thermal energy recovered by the solar panels to be transferred to the water. The gas burner and the HYDROGAZ® exchanger provide additional energy for increasing the temperature of the water in the top section of the cylinder. The burner starts up when the water temperature measured by 18 is lower than the set point and the thermostat 18 will stop once the temperature has reached the set point. The circulation pump is activated as soon as the 18 and 19 19 is difference in water temperature between 18 higher than the set point value and is stopped if the opposite is true. The combustion gases pushed by the burner’s ventilator, are channelled across a stainless

14 11 DHW outlet 12 Gas equipment 13 Condensates 14 Drainage outlet 15 Solar panel return

temperature sensor

16 Cold water inlet

temperature sensor

17 Domestic hot water outlet

temperature sensor

18 Regulation thermostat 19 Safety thermostat

steel HYDROGAZ® exchanger, which is submerged in the water tank. This transfers the heat produced by the combustion process to the water. A safety thermostat also controls the temperature of the water in the tank. The hot water is drawn off at the top of the device and sent directly to the various delivery points thanks to the cylinder pressure. The thermal insulation minimises heat loss. The device’s optimum volume/power ratio will be determined (with our help) depending on the importance and distribution of demand (consumption profile).

99


“SOLAR PREFERENCE” range 1 000 to 3,000 litres

SPECIFICATION

RC Solar

Optimised connections

Tank

CE compliance Cylinder with • 97/23/CE «RC» coated • 73/23/CE carbon steel • 89/336/CE tank Certigaz marking*

Reinforced thermal insulation

Inspection manholes

• Vertical carbon steel tank with 3 feet. • 1,000 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manholes(1). (ø 500 mm for 120 & 140 kW) Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating

• Finished with “RC851” coating (Maximum temp = 85°C constant) or “RC951” coating (T-max = 95°C at peak times). • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Gas equipment fitted onto the manhole ø 400 mm

(ø 500 mm for 120 & 140 kW) • Power burner (single-phase integrated control/230 V) • Removable flue gases/liquid exchanger made of stainless steel.

Solar U-tube heater

• Removable U-tube heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Inlet/outlet DN32F or DN50F + DN8F purge. • Class B heater, compliant with article 16.9 of the health regulations.

Differential solar regulator + 6 sensors Options

• Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Electric backup (immersion heater on the top section + double safety thermostat). • Accessories kit (thermometer, DN50 drainage valve, water shortage pressure switch). • Non-standard versions available on request. • Homogenisation kit (circulator + non-return valve + 2 valves + tee fitting).

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • U-tube heater = 5 years. • Gaz exchanger = 3 years. • Other workstations = 1 year

*except 120 and 140 Kw.

100

High resistance U-tube heater


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS øD

EC DA

TG

TO

AN1 Threaded nozzle DA Outlet/loop return DA

EC Hot water outlet EF Cold water inlet

H

PI Support feet AN1

SF Flue gases outlet

TG F

TG Threaded nozzles

for thermometer and thermostat

K

TO

TH Manhole with an

DA

B

G

C

E1

J

internal diameter of 400 mm (or 500 mm depending on the power of the gas equipment)

VM Threaded drainage

EF

VM

Ø 1100 and 1300 mm

2

A

PI

outlet

Ø 800 mm

180°

EC VM

DA

AN1 DA EF TG

DA

AN1 DA EF TG

90°

EC VM

180°

TO

270°

270°

90°

T T

300°

V

U

60°

.

S

e zon ce k n n a ar ta Cle = Ø

315° 0°

TO TG

TO

S

TO V

45°

U

SF

TG

.

e 

n zo ce nk n ra ta ea Ø Cl =

SF

With ø 400 mm manhole Capacity (litres) 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

J K TG (G int. E F G A B C H ØD (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) thread) 90 90 90 90 90 90 90 90

440 475 475 510 510 560 560 560

630 575 665 610 700 660 700 750

800 950 950 1 100 1 100 1 300 1 300 1 300

955 990 990 1 025 1 025 1 075 1 075 1 075

2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120

690 725 725 760 760 810 810 810

2 370 1 890 2 440 1 960 2 510 2 060 2 310 2 610

1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450

1 540 1 195 1 575 1 230 1 610 1 280 1 460 1 660

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

EC-EF (G int. thread) DA-VM (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

Weight (kg) 320 350 380 420 480 540 560 590

Note: H = High version ; B = Low version.

(1)

101


TECHNICAL SPECIFICATIONS Gas equipment GAS FLOW RATE

Type of gas fitting (reference)

Burner dimensions Ø Ø Flue Diameter G20 Calorific Useful Gas gases Ø CondenG31 G20 natural Weight of the flow rate power natural propane supply outlet sates outlet (kg) gas manhole gas (kW) (kW) (DN) (mm) (DN) (Groningen) gas 37 S T U V (mm) (Lacq) SF mbar 25 mbar 20 mbar 3 (kg/hr) (m /h) (m3/h)

TRG 32 N/P

34

32

3.60

4.18

2.64

15

153

10

82

400

215 305 660 300

TRG 51 N/P

54

51

5.71

6.64

4.20

20

153

10

91

400

215 305 660 300

TRG 60 N/P

63

60

6.67

7.75

4.90

20

153

10

96

400

215 305 660 300

TRG 90 N/P

95

90

10.05

11.69

7.38

20

153

10

110

400

215 305 660 400

TRG 120 N/P

133

120

14.07

16.36

10.33

20

200

10

195

500

240 480 860 400

TRG 140 N/P

150

135

15.87

18.45

11.66

20

200

10

195

500

240 480 860 400

Electrical supply = single phase 230 V - Consumption: 200 W from 32 to 90 kW, 500 W for 120 & 140 kW

Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Capacity (litres) 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000

Solar heater Power (kW) Inlet/outlet nozzle 30 DN32 30 DN32 40 DN65 40 DN32 60 DN32 60 DN65 80 DN65 80 DN65

(1)

Note : H = High version ; B = Low version.

(2)

mWC = Meter of water column

Flow rate m3/h

Head loss (mWC)(2)

Surface area (m2)

2 2 2,7 2,7 4 4 5,2 5,2

0,15 0,15 0,3 0,15 0,7 0,15 0,3 0,3

1,8 1,8 3,3 2,45 3 5,1 5,1 5,1

MODELS AVAILABLE Tank 85°C – Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Heater / gaz power Capacity (litres) 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1)

Reference 30 / 32 kW

Reference 40 / 51 kW

Reference 40 / 60 kW

Reference 60 / 60 kW

Reference 60 / 90 kW

Cooling constant (Wh/day.K.L)

PLH200H6090i PLH200B6090i

0,054 0,050 0,046 0,044 0,041 0,038

PLH100H3032i PLH100B3032i PLH150H4051i PLH150B4051i

PLH150H4060i PLH150B4060i PLH200H6060i PLH200B6060i

Note: H = High version ; B = Low version.

(1)

Heater / gaz power Capacity (litres) 2 500 3 000

102

Reference 80 / 90 kW

Reference 80 / 120 kW

Reference 80 / 140 kW

Cooling constant (Wh/day.K.L)

PLH250S8090i

PLH250S80120i PLH300S80120i

PLH300S80140i

0,036 0,035


Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Heater / gaz power Capacity (litres) 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1)

Reference 30 / 32 kW

Reference 40 / 51 kW

Reference 40 / 60 kW

Reference 60 / 60 kW

Reference 60 / 90 kW

PSH100H3032i PSH100B3032i PSH150H4051i PSH150H4060i PSH150B4051i PSH150B4060i PSH200H6060i PSH200H6090i PSH200B6060i PSH200B6090i

Cooling constant (Wh/day.K.L) 0,054 0,050 0,046 0,044 0,041 0,038

Note : H = High version ; B = Low version.

(1)

Heater / gaz power Capacity (litres) 2 500 3 000

Reference 80 / 90 kW

Reference 80 / 120 kW

Reference 80 / 140 kW

Cooling constant (Wh/day.K.L)

PSH250S8090i

PSH250S80120i PSH300S80120i

PSH300S80140i

0,036 0,035

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

Tank 95°C – Solar U-tube heater

2 OPTIONS Reference MSP25 MSP32 KA7

KH1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Accessories kit - Dial thermometer 0/120°C - DN50 drainage valve - Water shortage pressure switch Homogenisation kit - circulator - non-return valve - 2 valves - tee fitting

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note: Integrated loop heater is not pre-assembled onto the cylinder.

103


“SOLAR DPX” DUPLEX STAINLESS STEEL range 1 000 to 3,000 litres

SPECIFICATION

DPX Solar

Optimised connections

DUPLEX CE compliance stainless steel • 97/23/CE • 73/23/CE • 89/336/CE Certigaz marking*

Reinforced thermal insulation

Inspection manholes

Tank • Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 1,000 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • Specific nozzle for the solar regulation sensor. • ø 400 mm inspection manholes (1). (ø 500 mm for 120 & 140 kW). Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Gas equipment fitted onto the manhole ø 400 mm

(ø 500 mm for 120 & 140 kW) • Power burner (single-phase integrated control/230 V) • Removable flue gases/liquid exchanger made of stainless steel.

Solar U-tube heater • Removable U-tube heater with bundle made of 316 L stainless steel, fixed onto the inspection manhole. • Inlet/outlet DN32F or DN50F + DN8F purge. • Class B heater, compliant with article 16.9 of the health regulations.

Differential solar regulator + 6 sensors Options • Tank made of AISI 316L stainless steel. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Accessories kit (thermometer, DN50 drainage valve, water shortage pressure switch). • Electric backup (immersion heater on the top section + double safety thermostat). • Homogenisation kit (circulator + non-return valve + 2 valves + tee fitting).

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • U-tube heater = 5 years. • Gaz exchanger = 3 years. • Other workstations = 1 year * except 120 and 140 Kw.

104

High resistance U-tube heater


øD

EC DA Outlet/loop return EF Cold water inlet EC hot water outlet

TT

DA

PI Support feet SF Flue gases outlet

TM

TH Manhole with an internal diameter

of 400 mm (or 500 mm depending on the power of the gas equipment)

TH H

TM Nozzles for thermometer TT Nozzles for thermostat (or PT100 VD DN50 drainage

E

F

G

M

J

K

L

probe)

DA

VD

Ø 1250 mm

A

PI

B

EF

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS

2 Ø 800 and 1100 mm

270°

EC VM

EC VM

270°

DA

DA

DA EF TM TT

DA EF TM TT

SF

0° S

TH

S

SF

180°

180°

e.

n zo e k nc n ra ta ea Ø Cl =

n zo e k nc n ra ta ea Ø Cl =

TH

135°

e.

140°

90° V

TH

90°

TH

U

T

V U

45°

T

50°

With ø 400 mm manhole Capacity (litres) 1 000 1 500 2 000 2 500 3 000

A B (mm) (mm) 90 90 90 90 90

440 510 560 560 560

ØD (mm)

E (mm)

F (mm)

G (mm)

H (mm)

J (mm)

K (mm)

L (mm)

M (mm)

TG (G int. thread)

790 1 100 1 250 1 250 1 250

590 685 745 745 745

690 760 810 810 810

1 390 1 130 1 180 1 510 1 640

2 430 2 020 2 110 2 660 2 880

1 875 1 390 1 425 1 975 2 195

2 000 1 520 1 570 2 120 2 340

2 025 1 545 1 595 2 145 2 365

1 600 1 230 1 280 1 660 1 860

DN15 DN15 DN15 DN15 DN15

EC-EF (G int. thread) DA-VM (G ext. thread) DN50 DN50 DN50 DN50 DN50

Weight (kg)

155 225 265 335 355

105


TECHNICAL SPECIFICATIONS Gas equipment Type of gas fitting (reference)

GAS FLOW RATE Burner dimensions Ø Ø Flue G20 Diameter G31 G20 natural Calorific Useful natural Gas gases Ø Condenpropane supply outlet sates outlet Weight of the gas flow rate power gas (kg) manhole S gas 37 (Groningen) T U V (kW) (kW) (DN) (mm) (DN) (Lacq) (mm) mbar 25 mbar SF 20 mbar 3 /h) (kg/hr) (m (m3/h)

TRG 32 N/P

34

32

3.60

4.18

2.64

15

153

10

82

400

215 305 660 300

TRG 51 N/P

54

51

5.71

6.64

4.20

20

153

10

91

400

215 305 660 300

TRG 60 N/P

63

60

6.67

7.75

4.90

20

153

10

96

400

215 305 660 300

TRG 90 N/P

95

90

10.05

11.69

7.38

20

153

10

110

400

215 305 660 400

TRG 120 N/P

133

120

14.07

16.36

10.33

20

200

10

195

500

240 480 860 400

TRG 140 N/P

150

135

15.87

18.45

11.66

20

200

10

195

500

240 480 860 400

Electrical supply = single phase 230 V - Consumption: 200 W from 32 to 90 kW, 500 W for 120 & 140 kW

Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Solar heater Power (kW) Inlet/outlet nozzle 30 DN32 40 DN32 60 DN65 80 DN65 80 DN65

Capacity (litres) 1 000 1 500 2 000 2 500 3 000

Flow rate m3/h

Head loss (mWC)(1)

Surface area (m2)

2 2,7 4 5,2 5,2

0,15 0,15 0,15 0,3 0,3

1,8 2,45 5,1 5,1 5,1

MODELS AVAILABLE Solar U-tube heater Primary (Glycol water 30%) = 80/65°C – Secondary 10/60°C Heater / gaz power Capacity (litres) 1 000 1 500 2 000

Heater / gaz power Capacity (litres) 2 500 3 000

106

Reference 30 / 32 kW

Reference 40 / 51 kW

Reference 40 / 60 kW

Reference 60 / 60 kW

Reference 60 / 90 kW

DSH100H3032i DSH150B4051i DSH150B4060i DSH200B6060i DSH200B6090i

Reference 80 / 90 kW

Reference 80 / 120 kW

Reference 80 / 140 kW

Cooling constant (Wh/day.K.L)

DSH250S8090i

DSH250S80120i DSH300S80120i

DSH300S80140i

0,036 0,035

Cooling constant (Wh/day.K.L) 0,054 0,044 0,038


Reference MSP25 MSP32 KA7

KH1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Accessories kit - Dial thermometer 0/120°C - DN50 drainage valve - Water shortage pressure switch Homogenisation kit - circulator - non-return valve - 2 valves - tee fitting

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

OPTIONS

2

Note: Integrated loop heater is not pre-assembled onto the cylinder.

107


SOLAR CALEO

®

SOLAR HOT WATER FOR HEATING CYLINDER RECOVERY AND/OR BACKUP 500 to  4,000

Litres

Specifically designed to meet primary hot water storage demands in the service and manufacturing sectors, the SOLAR CALEO® 500 to 4,000 litres solar hot water cylinders are perfect for use in installations using solar energy. If necessary, an electric immersion heater and/or boiler can be used to provide additional energy. These devices are designed for heating applications or the production of domestic hot water together with an instantaneous heat exchanger system.

SOLAR CALEO® L

The SOLAR CALEO® heating hot water cylinders are available in two models: • The SOLAR CALEO® L : connected to the solar energy recovery exchanger, it can provide both the recovery and backup or, if required, be used only for energy recovery together with the SOLAR CALEO® A. • The SOLAR CALEO® A : used together with a SOLAR CALEO® L, it raises the temperature of preheated water and can, by disassociating the recovery and backup systems, provide greater hot water reserves. Designed for use in a pressurised closed circuit, these devices are made of carbon steel

SOLAR CALEO® A

108


• Multi-purpose: - Heating possible from multiple heat generators. - Simultaneous feeding of multiple consumer circuits. • Significant energy reserves to clip peaks in demand. • Water can be stored at a constant temperature of up to 110°C. • Operates in a pressurised closed circuit: - Tank: steel or carbon without internal coating. - Extended lifespan: very limited corrosion. • Particularly suited for use with energy recovery (solar, heat pump) systems with or without a backup (electric immersion heater, solid or gaseous fuel boilers). • Reduced greenhouse gas emissions. • Quick and easy to install: equipment delivered to site with pre-assembled insulation and heating systems (can be easily removed if required).

OPERATING PRINCIPLES

Solar installation diagram with “SOLAR CALEO® L” + electric backup + instantaneous PLAKEO®

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

ADVANTAGES

2

DT

option M

7

DT

DT

DT

M

Solar installation diagram with “SOLAR CALEO® L” + “SOLAR CALEO® A” + electric backup + instantaneous PLAKEO®

7 DT

M

DT

DT

DT

M

109


SOLAR CALEO® L Recovery and/or backup 500 to 4,000 litres SPECIFICATION

Solar

Optimised connections

CE compliance • 97/23/CE

Tank

Reinforced thermal insulation

• 500 to 4,000 litres capacity. • Vertical carbon steel tank. • Three support feet. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram).

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket

Electrical backup option

• Mounting boss welded on the tank • Electrical elements with Incoloy pins. • Temperature regulation: - P =< 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cabled power contactor). - P > 20 kW: double unipolar safety thermostat

2,000 to 4,000 litres 500 to 1,500 litres

Other options

• Ø 400 mm insulated manhole (from 500 litres). • Accessories kit (thermometer 0/120°C, DN25 safety valve, flue gases relief valve, DN50 valve for drainage). • Non-standard dimensions, higher operating pressure and non-standard position of nozzles

Warranties (in accordance with our general conditions of sale) • Tank = 2 years (against perforation, used in a pressurised closed circuit only.) • Electrical equipment and accessories = 1 year.

MODELS AVAILABLE Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

Reference with a 100 mm-M1 jacket ECL050M11 ECL075M11 ECL100M11H ECL100M11B ECL150M11H ECL150M11B ECL200M11H ECL200M11B ECL250M11 ECL300M11 ECL400M11

Cooling constant (Wh/day.K.L) 0,060 0,049 0,046 0,042 0,039 0,037 0,034 0,032 0,031 0,030 0,026

Reference with a 100 mm-M0 jacket ECL050M01 ECL075M01 ECL100M01H ECL100M01B ECL150M01H ECL150M01B ECL200M01H ECL200M01B ECL250M01 ECL300M01 ECL400M01

Cooling constant (Wh/day.K.L) 0,072 0,058 0,054 0,050 0,046 0,044 0,041 0,038 0,036 0,035 0,030

Electrical backup option Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

Power (kW) 6 6 9 9 12 12 15/20 15/20 20 24 / 30 / 35 35

Note : H = High version ; B = Low version.

(1)

110

Reference WITH thermostat AE6 AE6 AE9 AE9 AE12 AE15 AE15 / AE20 AE15 / AE20 AE20 AE24 / AE30 / AE35 AE35

Reference WITHOUT thermostat AE6ST AE6ST AE9ST AE9ST AE12ST AE15ST AE15ST / AE20ST AE15ST / AE20ST AE20ST AE24ST / AE30ST / AE35ST AE35ST


øD

DP

2,000 to 4,000 litres

AH TH

AH TH

TT RS

AH RP

EL

V3V

H

RS

AT

AH/TH Hydraulic backup or

thermometer

K

F

AH/RP Hydraulic backup or

PLAKEO® return

SD

AT Use depending on

application

G

DP PLAKEO® outlet

C

J

E

DS

B

DS Solar outlet RP

PI Support feet.

"PLAKEO" return

VD

A

PI

RS Solar return SD Solar probe .

(PT 100/1 000)

øD

V3V Sensor for 3-way solar

valves and PLAKEO®

DP

500 to 1,500 litres included

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS

VD Drainage AH TH

AH TH

V3V

RBI

vailable as an optional extra for electric backup:

2

EL Electric immersion

RS

heater (15-35 kW)

AH RH

RBI Integrated loop return H

(thermostat + electric immersion heater

AT

RS

TT Thermostat F

DS

B

C

G

E

J

SD

PI

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

VD

RS - RP (G int. thread)

ST1 - ST2 - ST3 TT (G int. thread)

AT - TH (G ext. thread)

DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

DN40 DN40 DN40 DN40 DN40 DN40 DN50 DN50 DN50 DN50 DN50

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

ØD (mm) 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300 1 500

A (mm) 90 90 90 90 90 90 90 90 90 90 90

B (mm) 410 440 440 475 475 510 510 560 560 560 630

C (mm) 735 765 960 800 995 835 1 030 885 970 1 080 1 100

EL - RBI (threaded nozzles) DN50 DN50 DN50 DN50 DN50 DN50 M77 M77 M77 M77 M77 E (mm) 1 060 1 090 1 440 1 125 1 475 1 160 1 510 1 210 1 375 1 560 1 560

A

RP

VD - DP ( G ext. thread)

Weight (kg)

DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

120 155 170 200 235 270 335 380 410 440 645

F (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120 2 065

G (mm) 950 980 1 340 1 015 1 375 1 050 1 410 1 100 1 290 1 460 1 460

H (mm) 1 820 1 880 2 430 1 950 2 500 2 020 2 560 2 110 2 360 2 660 2 780

J (mm) 1 160 1 190 1 550 1 225 1 585 1 260 1 610 1 305 1 495 1 665 1 695

J (mm) 1 810 1 510 1 700 1 870 1 930

Note: H = High version ; B = Low version.

(1)

111


SOLAR CALEO® A Backup 500 to 4,000 litres SPECIFICATION

Solar

Optimised connections

CE compliance • 97/23/CE

Tank

Reinforced thermal insulation

• 500 to 4,000 litres capacity. • Vertical carbon steel tank. • Three support feet. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram).

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom dished end) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Electrical backup option

• Mounting boss welded on the tank • Electrical elements with Incoloy pins. • Temperature regulation: - P > 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cabled power contactor). - P > 20 kW: double unipolar safety thermostat - P > 20 kW : Thermostat double sécurité unipolaire.

2,000 to 4,000 litres 500 to 1,500 litres

Other options

• Ø 400 mm insulated manhole (from 500 litres). • Accessories kit (thermometer 0/120°C, DN25 safety valve, flue gases relief valve, DN50 valve for drainage). • Dimensions, higher working pressure and non-standard position of nozzles.

Warranties

(in accordance with our general conditions of sale) • Tank = 2 years (against perforation, used in a pressurised closed circuit only.) • Electrical equipment and accessories = 1 year.

MODELS AVAILABLE Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

Reference with a 100 mm-M1 jacket ECA050M11 ECA075M11 ECA100M11H ECA100M11B ECA150M11H ECA150M11B ECA200M11H ECA200M11B ECA250M11 ECA300M11 ECA400M11

Cooling constant (Wh/day.K.L) 0,060 0,049 0,046 0,042 0,039 0,037 0,034 0,032 0,031 0,030 0,026

Reference with a 100 mm-M0 jacket ECA050M01 ECA075M01 ECA100M01H ECA100M01B ECA150M01H ECA150M01B ECA200M01H ECA200M01B ECA250M01 ECA300M01 ECA400M01

Cooling constant (Wh/day.K.L) 0,072 0,058 0,054 0,050 0,046 0,044 0,041 0,038 0,036 0,035 0,030

Electrical backup option Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

Power (kW) 6 6 9 9 12 12 15/20 15/20 20 24 / 30 / 35 35

Note : H = High version ; B = Low version.

(1)

112

Reference WITH thermostat AE6 AE6 AE9 AE9 AE12 AE15 AE15 / AE20 AE15 / AE20 AE20 AE24 / AE30 / AE35 AE35

Reference WITHOUT thermostat AE6ST AE6ST AE9ST AE9ST AE12ST AE15ST AE15ST / AE20ST AE15ST / AE20ST AE20ST AE24ST / AE30ST / AE35ST AE35ST


øD

DP ST3

2,000 to 4,000 litres

TH

TH

H

ST2 AT

AT

ST1

EL

E

TT

AT Use depending on

application.

RS C

J

DP PlakEo® outlet PI Support feet RP/RS PlakEo® return or

G

solar hot water inlet

B

F

ST1 Temperature sensor for

backup actuation (PT100 probe) ST2/ST3 Temperature sensor for controlling the temperature of hot water in the cylinder TH Nozzle for thermometer VD Drainage

RP

VD

A

PI øD

DP

500 to 1,500 litres included

Available as an optional extra for electric backup : EL Electric immersion heater (15-35 kW) RBI Integrated loop return (thermostat + electric immersion heater) TT Thermostat

TH

TH

ST3 H

AT

AT

ST1

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS

2

ST2

E

RS

B

G

C

J

RBI

VD

PI

Capacity (litres)

RS - RP (G int. thread)

ST1 - ST2 - ST3 TT (G int. thread)

500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

Capacity (litres) 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

ØD (mm) 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300 1 500

A (mm) 90 90 90 90 90 90 90 90 90 90 90

AT - TH (G ext. thread) DN40 DN40 DN40 DN40 DN40 DN40 DN50 DN50 DN50 DN50 DN50 B (mm) 410 440 440 475 475 510 510 560 560 560 630

EL - RBI (threaded nozzles) DN50 DN50 DN50 DN50 DN50 DN50 M77 M77 M77 M77 M77

C (mm) 960 990 1 290 1 025 1 325 1 060 1 360 1 110 1 260 1 410 1 460

E (mm) 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120 2 065

A

RP

VD - DP (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 F (mm) 690 750 750 750 850

Weight (kg) 120 155 170 200 235 270 335 380 410 440 645 G (mm) 660 690 840 725 875 760 910 810 860 960 1 010

H (mm) 1 820 1 880 2 430 1 950 2 500 2 020 2 560 2 110 2 360 2 660 2 780

J (mm) 1 110 1 140 1 440 1 175 1 475 1 210 1 510 1 260 1 410 1 560 1 610

Note : H = High version ; B = Low version.

(1)

113


SOLAR HOT WATER FOR HEATING CYLINDER COIL(S)

300 to 3,000 Litres Specifically designed to meet heating hot water production and storage needs in the service and manufacturing sectors, the 300 to 3,000 litres coil cylinder for the production of primary hot water is particularly suited to installations using renewable energies. The presence of one or two high-powered coils makes it possible to heat the device from one or more energy sources (solar, heat pump, etc.) without contact between the different coolants. If necessary, an electric immersion heater and/or boiler can be used to provide additional energy. For use in a pressurised closed circuit, these devices are made of carbon steel.

ADvantages • Multi-purpose: - Heating possible from multiple heat generators. - Simultaneous feeding of multiple consumer circuits. • Accelerated heating: coil(s) with large exchange surface area. • Significant water storage capacity, thus reducing the number of generator operating cycles. • Water can be stored at a constant temperature of up to 110°C.

• Particularly suited for use with energy recovery (solar, heat pump) systems with or without a backup (solid or gaseous fuel boilers). • Reduced greenhouse gas emissions. • Quick and easy to install: equipment delivered to site with pre-assembled insulation and heating systems (can be easily removed if required). • Non-standard version available on request. *Note : single upper coil version available on request.

114


With two coils Solar regulation

1

1 Solar panel 2 Solar module 3 Classic heat

pump

9

Y

4 Compressor 5 Holder 6

8

Drainage outlet

7 Cold water inlet 8 Underfloor

heating

2 3

9 Heating network Condenseur

Evaporateur

4

6

5

7

With one coil

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

OPERATING PRINCIPLES

2

Solar regulation

1

1 Solar panel

5

Y

2 Solar module 3 Cold water inlet 7 4 Underfloor

heating

4

5 Heating network

2

3

With one coil + backup via a boiler (direct looping on the cylinder) Solar regulation

1 Solar panel 2 Solar module

Y 6 1

3 Drainage outlet 4 Cold water inlet 7 5 Underfloor

5

heating

6 Heating network

Y

2

3

4

115


Single coil 300 to 3, 000 litres SPECIFICATION

Solar

Optimised connections

CE compliance • 97/23/CE • 73/23/CE

Reinforced thermal insulation

Tank

• Vertical carbon steel tank with 3 feet. • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • DN125 handhole.

External protection • Anti-rust paint.

Removable thermal insulation

(including the bottom of the tank) M1 fire rated : • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated : • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Coil exchanger made of carbon steel. Options

• Back up electric immersion heater : - Electrical elements with Incoloy pins. - DN40 tapped cap up to 12 kW, M77 beyond that. - Three-phase voltage of 230/400 up to 24 kW, three-phase 400/400 V beyond that. - Immersion heater mounting: on the tank. - Temperature regulation: - Electrical power ≤ 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cabled power contactor). - Electrical power ≤ 20 kW: Double unipolar safety thermostat. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors. • Electric backup (immersion heater on the top section + double safety thermostat). • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request

Warranties (in accordance with our general conditions of sale) •T  ank and coil = 2 years. • Other workstations = 1 year.

116


SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

DIMENSIONS øD

ECH

TT

ECB

TP

L

N

H

PS

RB TT

ECB Low temperature

J

hot water outlet

F

G

PS

ECH High temperature

hot water outlet

2

EF Cold water inlet C

E

PI Support feet

B

PS Nozzles for coil

EF

RB Loop return TM Nozzle for

thermometer

VD

TP DN125 handhole

A

PI

TT Nozzles for

thermostat (or PT100 probe)

270°

ECH VD

VD DN50 drainage

TP PS RB

180°

Note : TM is positioned at 90° on the following versions : • 300 L • 1 500 L • 2 000 L

ECB EF TM TT

90°

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

J L N E F G A B C H ØD (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) 90 90 90 90 90 90 90 90

375 390 420 440 510 560 560 560

545 560 590 610 700 760 760 760

550 650 800 800 1 100 1 300 1 300 1 300

645 775 795 1 535 660 930 960 1 820 690 960 1 000 1 880 690 1115 1 155 2 430 760 950 990 2 020 810 1 040 1 080 2 110 810 1 100 1 140 2 360 810 1 160 1 200 2 660

1 000 1 160 1 200 1 355 1 235 1 335 1 395 1 455

1 190 1 305 1 345 1 865 1 555 1 605 1 680 1 985

1 190 1 455 1 485 2 035 1 555 1 605 1 855 2 165

TM - TT (G int. thread) DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

VD - ECH ECB PS (G EF-RB ext. (G ext. thread) thread) DN50 DN25 DN50 DN25 DN50 DN25 DN50 DN25 DN65 DN40 DN65 DN40 DN65 DN40 DN65 DN40

Weight (kg) 115 165 230 280 330 430 460 490

117


550 650 800 800 1 100 1 300 1 300 1 300

25 25 25 25 40 40 40 40

Volume

300 500 750 1 000 1 500 2 000 2 500 3 000

DN

Surface area (m2)

Model

Diameter (mm)

Technical specification of lower coil

1,1 1,8 2,3 2,8 3,4 4,1 5,1 5,1

10 15 19 24 44 53 66 66

Solar 70/43,5°C - 32,5°C - 25l/mc² 60/48°C - 32,5°C - 40l/mc² Power (kW) S1 3,9 6,5 9,8 13 14,3 15,6 18,9 18,9

S2 3,9 6,5 9,8 13 16,3 24,1 36,4 36,4

Δp (mbar) S1 5 12 20 40 13 13 15 15

S2 8 10 30 70 24 31 45 45

Other sources 80/60°C - 10/40°C - EG30% 55/45°C - 10/40°C (PAC)

Surface area solar panels (m2) S1 6 10 15 20 22 24 29 29

S2 6 10 15 20 25 37 56 56

Flow rate (m3/h) S1 0,7 1,4 2,1 2,8 2,2 3 4,1 4,1

S2 1,4 2 2,8 3,5 3,5 4,1 5 5

Power (kW) S1 31 46 64 80 80 95 115 115

S2 8 14 20 26 24 30 40 40

Δp (mbar) S1 40 120 220 430 80 90 115 115

Note : 100 mbar = 1 mCE / EG = 30% pour solaire

MODELS AVAILABLE Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

M1 reference EPC030033M11 EPC050045M11 EPC075063M11 EPC100074M11 EPC150088M11 EPC200107M11 EPC250145M11 EPC300145M11

Cooling constant (Whr/day.K.L) 0.077 0.060 0.049 0.046 0.037 0.032 0.031 0.030

M0 reference EPC030033M01 EPC050045M01 EPC075063M01 EPC100074M01 EPC150088M01 EPC200107M01 EPC250145M01 EPC300145M01

Cooling constant (Whr/day.K.L) 0.091 0.072 0.058 0.054 0.044 0.038 0.036 0.035

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for hot water for heating cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

118

S2 15 60 90 200 50 55 70 70


SPECIFICATION

Solar

Optimised connections

CE compliance • 97/23/CE • 73/23/CE

Reinforced thermal insulation

Tank • Vertical carbon steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • DN125 handhole.

External protection • Anti-rust paint.

Removable thermal insulation

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

Dual coil 500 à 3 000 litres

2

(including the bottom of the tank) : M1 fire rated : • High-performance mineral wool - 100 mm thick (= 0.032 W/m/K). • Flexible PVC jacket M0 fire rated : • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Coil exchangers

made of carbon steel.

Options • Back up electric immersion heater : • Electrical elements with Incoloy pins. • DN40 tapped cap up to 12 kW, M77 beyond that. • Three-phase voltage of 230/400 up to 24 kW, three-phase 400/400 V beyond that. • Immersion heater mounting: on the tank. • Temperature regulation: - Electrical power ≤ 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cabled power contactor). - Electrical power ≤ 20 kW: Double unipolar safety thermostat. • Solar module with maximum WP of 6 bar (circulator, safety valve, manometer, thermometers, non-return valve, flow rate meter, degasser, valves, thermal insulation). • Differential solar regulator + 6 sensors. • Electric backup (immersion heater on the top section + double safety thermostat). • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, air vent valve). • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) •T  ank and coils = 2 years. • Other workstations = 1 year.

119


DIMENSIONS øD

ECH

TM

PS

TT PS

ECB

ECH High temperature hot .

TP

water outlet (DN50)

PS H

ECB Low temperature hot

L

M

N

water outlet

EF Cold water inlet

K

PS Nozzles for coil

G

J

PI Support feet

RB

TT

RB Loop return F

PS

TM Nozzle for thermometer

B

C

E

TP DN125 handhole TT Nozzles for thermostat (or .

PT100 probe)

EF

VD DN50 drainage PI

A

VD

270°

ECH VD

Note : TM is positioned at 90° on the following versions: • 1500 L • 2000 L

TP PS RB

180°

ECB EF TM TT

90°

Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

TM - TT J K L M N E F G A B C H ØD (G int. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) thread) 90 90 90 90 90 90 90

390 420 440 510 560 560 560

560 590 610 700 760 760 760

650 800 800 1 100 1 300 1 300 1 300

660 690 690 760 810 810 810

930 960 1 115 950 1 040 1 100 1 160

960 1 000 1 155 990 1 080 1 140 1 200

1 820 1 880 2 430 2 020 2 110 2 360 2 660

1 160 1 200 1 355 1 235 1 335 1 395 1 455

1 125 1 110 1 595 1 245 1 270 1 460 1 700

1 305 1 345 1 865 1 555 1 605 1 680 1 985

1 440 1 470 2 000 1 520 1 570 1 820 2 120

1 455 1 485 2 035 1 555 1 605 1 855 2 165

DN15 DN15 DN15 DN15 DN15 DN15 DN15

VD - ECH ECB EF-RB (G ext. thread) DN50 DN50 DN50 DN65 DN65 DN65 DN65

PS G ext. Weight thread) (kg) DN25 DN25 DN25 DN40 DN40 DN40 DN40

165 230 280 330 430 460 490

Diameter (mm)

DN

Surface area (m2)

Volume

Technical specification of lower coil

650 800 800 1 100 1 300

25 25 25 40 40

1,8 2,3 2,8 3,4 4,1

15 19 24 44 53

Other sources System 1 : 80/60°C - 10/60°C - Glycol water 30% System 1 : 70/43,5°C-32,5°C - 25l/mc² System 2 : 55/45°C - 10/40°C System 2 : 60/48°C-32,5°C - 40l/mc² (Heat pump) Power Δp Surface area solar Flow rate Power Δp (kW) (mbar) panels (m2) (m3/h) (kW) (mbar) S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 S1 S2 6,5 6,5 12 10 10 10 2 1,2 46 14 120 60 9,8 9,8 20 30 15 15 2,8 1,7 64 20 220 90 13 13 40 70 20 20 3,5 2,3 80 26 430 200 14,3 16,3 13 24 22 25 3,5 2,1 80 24 80 50 15,6 24,1 13 31 24 37 4,1 2,6 95 30 90 55

2 500

1 300

40

5,1

66

18,9 36,4

15

45

29

56

5

3,5

115 40

115 70

3 000 3 000

1 300 1 300

40 40

5,1 5,1

66 66

18,9 36,4 18,9 36,4

15 15

45 45

29 29

56 56

5 4,1

3,5 5

115 40 115 40

115 70 115 70

Model

500 750 1 000 1 500 2 000

Solar

Note : 100 mbar = 1 meter of water column (1mWC) / Glycol water = 30% for solar

120


650 800 800 1 100 1 300 1 300 1 300

25 25 25 40 40 40 40

1,8 2,3 2,8 3,4 4,1 5,1 5,1

Volume

500 750 1 000 1 500 2 000 2 500 3 000

DN

Surface area (m2)

Model

Diameter (mm)

Solar

15 19 24 44 53 66 66

Other sources System 1 : 80/60°C - 10/40°C System 1 : 70/43,5°C-32,5°C - 25l/mc² Glycol water 30% System 2 : 55/45°C - 10/40°C (Heat System 2 : 60/48°C-32,5°C - 40l/mc² pump) Power Δp Surface area solar Flow rate Power Δp (kW) (mbar) panels (m2) (m3/h) (kW) (mbar) S1 3,3 4,9 5,9 6,5 8,5 8,5 8,5

S2 3,3 4,9 5,9 6,5 13 13 13

S1 4 9 14 4 5 5 5

S2 6 14 22 6 11 11 11

S1 5 7,5 9 10 13 13 13

S2 5 7,5 9 10 20 20 20

S1 2 2,8 3,5 3,5 4,1 5 5

S2 1,2 1,7 2,3 2,1 2,6 3,5 3,5

S1 46 64 80 80 95 115 115

S2 14 20 26 24 30 40 40

S1 120 220 430 80 90 115 115

S2 60 90 200 50 55 70 70

Note : 100 mbar = 1 meter of water column (1mWC) / Glycol water = 30% for solar

Technical specification of combined upper and lower coils (connected in a series)

650 800 800 1 100 1 300 1 300 1 300

25 25 25 40 40 40 40

2,8 4,0 4,5 5,5 7,2 8,2 8,2

Volume

500 750 1 000 1 500 2 000 2 500 3 000

DN

Surface area (m2)

Model

Diameter (mm)

Solar

23 33 38 71 93 106 106

Other sources System 1 : 80/60°C - 10/40°C - Glycol System 1 : 70/43,5°C-32,5°C - 25l/mc² water 30% System 2 : 55/45°C - 10/40°C (Heat System 2 : 60/48°C-32,5°C - 40l/mc² pump) Power Δp Surface area solar Flow rate Power Δp (kW) (mbar) panels (m2) (m3/h) (kW) (mbar) S1 6,5 9,8 13 19,5 26 32,5 39

S2 6,5 9,8 13 19,5 26 32,5 39

S1 19 33 64 22 22 22 26

S2 32 50 112 39 50 64 77

S1 10 15 20 30 40 50 60

10 15 20 30 40 50 60

S2

S1 2,9 4,3 5,5 4,8 6,3 7,6 8,8

S2 3,3 4,9 5,9 5,8 7,4 8,7 10,1

S1 60 90 115 100 132 160 185

S2 38 56 68 67 85 100 116

S1 370 830 1 600 140 210 350 470

S2 480 1 060 1 800 180 270 410 590

SOLAR HOT WATER (DOMESTIC HOT WATER AND HEATING)

Technical specification of upper coil

2

Note : 100 mbar = 1 meter of water column (1mWC) / Glycol water = 30% for solar

MODELS AVAILABLE Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

M1 reference EPP050045027M11 EPP075063044M11 EPP100074044M11 EPP150088055M11 EPP200107084M11 EPP250145084M11 EPP300145084M11

Cooling constant (Whr/day.K.L) 0.060 0.049 0.046 0.037 0.032 0.031 0.030

M0 reference EPP050045027M01 EPP075063044M01 EPP100074044M01 EPP150088055M01 EPP200107084M01 EPP250145084M01 EPP300145084M01

Cooling constant (Whr/day.K.L) 0.072 0.058 0.054 0.044 0.038 0.036 0.035

OPTIONS Reference MSP25 MSP32 RSD6 KA1

Description Solar module up to 30 m² of SUN300 solar panels Solar module up to 80 m² of SUN300 solar panels Differential solar regulator + 6 sensors Accessories kit - DN25 safety valve calibrated at 7-bar - Dial thermometer 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for hot water for heating cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : RBI livré non monté sur le ballon.

121


PLAKEO®. ............................................................................................124|127 Plate heat exchanger system

DHW storage cylinder.....................................................................128|139 “PREFERENCE” 300 to 6,000 litres range "DPX" duplex stainless steel 300 to 3,000 litres range “GLASS LINED” 300 to 3,000 litres range

DHW coil cylinder.............................................................................140|161 "DPX" duplex stainless steel range - 300 to 3,000 litres coil cylinder "DPX" duplex stainless steel range - 500 to 3,000 litres dual coil cylinder “GLASS LINED” range 300 to 3,000 litres - Single coil “GLASS LINED” range 300 to 3,000 litres - Dual coil “GLASS LINED” range 500 to 2,000 litres - Single coil for heat pump

PREPAC DHW cylinder. ..................................................................162|169 “PREFERENCE” range – 500 to 3,000 litres "DPX" duplex stainless steel range – 500 to 3,000 litres

DHW electric cylinder.....................................................................170|183 "PREFERENCE” 300 to 6,000 litres range - Electric immersion heater "DPX" duplex stainless steel 300 to 3,000 litres range - Electric immersion heater “PREFERENCE” 500 to 6,000 litres range - Electric cartridge heater "DPX" duplex stainless steel 500 to 3,000 litres range - Electric cartridge heater

122


DOMESTIC HOT WATER

3

DHW U-tube heater cylinder........................................................184|191 “PREFERENCE” 300 to 6,000 litres range "DPX" duplex stainless steel 300 to 3,000 litres range

Dual energy DHW cylinder............................................................192|199 “PREFERENCE” 300 to 6,000 litres range "DPX" duplex stainless steel 300 to 3,000 litres range

Hydrogaz® DHW cylinder...............................................................200|213 “PREFERENCE” 750 to 6,000 litres range "DPX" duplex stainless steel 750 to 3,000 litres range “TCE” 220 to 400 litres range

TIMEOX® electric loop heater.......................................................214|217 3 to 35 kW

PRIMEO® primary storage cylinder. ..........................................218|221 750 to 3 000 litres DHW heater

Domestic hot water substation ..................................................222|225 System integrated into a multi-energy SKID

123


PLAKEO

®

PLATE HEAT EXCHANGER SYSTEM DHW PRODUCTION 20 to  1, 347

kW

The PLAKEO® module is an instantaneous or semi-instantaneous domestic hot water system built around a removable high-performance plate heat exchanger. This compact system comes as a pre-assembled unit incorporating control, safety and regulation devices, reputed for their reliability and precision, necessary for its operation. It is supplied fully preset, however, it can be completely reprogrammed by the user thanks to the use of the latest technologies. The standard control box displays temperature alarms as well as pump and probe faults .

ADvantages •H  ot water available on demand and at whatever flow rate and temperature you desire. • Removable plates for easy maintenance. • Increase in power by adding standard elements. • Compact unit which can be installed in small spaces. • Module supplied fully preset (can be re-programmed by the user). • Quick and easy to set up. • Anti-legionella programme (on all models). • Limited heat loss (no buffer volume). • Excellent resistance to corrosion (316 stainless steel plates). • High exchange coefficient. • Low head loss. • Peak clipping in semi-instantaneous mode thus reducing the in-built power. • e-LESS communicating version (optional extra) - the control and monitoring system for domestic hot water and hot water for heating production and storage.

124


OPERATING PRINCIPLE The exchanger consists of a series steel plates made of stainless steel, between which the water for heating (primary circuit) and domestic water (secondary circuit) circulate alternately against the flow. The heat exchanged between the fluids via the plates instantly heats the domestic water, the flow rate of which depends on the power of the selected exchanger. The nitrile seals ensure water tightness between the plates and channels the fluids. A pump installed on the primary circuit assures the circulation of the heating hot water around the plate exchanger. As for the domestic hot water, this is forced into the exchanger by mains pressure. A high-precision control system (¹ 0.5°C), comprising an electronic regulator, a probe and a 3-way motorised valve, constantly adjusts the temperature of the domestic hot water leaving the secondary circuit. Various components such as the electric control box, safety valve, air vent valve, manometer and valve, protect the heat exchanger system or complement the device. The addition of a storage cylinder (semi-instantaneous heating) meets the needs of peaks in demand without the need for an extremely high-powered exchanger. In such cases, a charge pump assures the circulation of domestic water between the plate exchanger and the buffer cylinder.

Semi-instantaneous production

Instantaneous production

3

21 an de

1

m

9

8

5

2

4

6

5

9

8

16 3

7

4

12 17 2

14

1

4

13

14 15

13

17 22

19

20

23

4

14

20

5

7

7

15

4 2

4

5

14

11

3

7

18

19 15

3

Co m

6 4

12

4

21

18

1 Heat generator

7

Primary pump

15 Expansion system

19 Heating outlet

2

Safety valve

8

Plate exchanger

16 Distribution of domestic .

20 Heating return

3

Automatic air vent valve

9

Control probe

4

Isolating valve

12 DHW loop pump

5

Sieve filter

13 Non-return valve

6

3-way valve (regulation)

14 Drainage valve

hot water

18 Cold water inlet (according

to European directive. 98/83/CE of 03/11/1998)

Estimation of instantaneous need

3

21 Electrical box

17 Manometer

DOMESTIC HOT WATER

3

Co m

2

m

an d

e

16

22 Charge pump 23 Domestic hot water.

buffer tank

Determining capacity in semi-instantaneous mode

1 100

1 000

1 000

900

900

800

800

700

700 600 600 500 Semi-instantaneous power (kW)

500 400 300

Power (kW)

200 100

0

50

100

150

200

250

300

350

400

450

500

550

400 300 200 100

0

100

200

300

400

500

600

700

800

900

1 000

Instantaneous power (kW)

Number Sports facilities (showers)

Luxury hotels

Hotels

Luxury housing

Standard housing

Instantaneous

750 L

1 500 L

2 500 L

500 L

1 000 L

2 000 L

3 000 L

Hospitals (beds)

125


SPECIFICATION Servo-motor Motorised 3-way valve CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

Protected and connected single or double primary pump with automatic permutation and fault reporting on dry contact

Plastic electronic control box

(single phase 230 V - 16 A), completely programmable, with backlit digital display : • PID control with “normal/reduced” settings (programmable for 1 week/2 settings a day). • Safety thermostat function. • Dry contact for reporting pump or probe faults. • Dry contacts for reporting high and low temperature alerts. • Programmable operating times. • Adjustable control settings. • Adjustable anti-legionella programme. • TURBO mode (start-up of 2nd primary pump if the water temperature is insufficient). • Digital thermometer function. • Communicating version (with e-LESS, available as an option).

Air separator and air vent valve

Removable plate heat exchanger

Isolating valve (drainage)

PT100 temperature measurement probe Safety valve

Manometer Protected and connected single or double charge pump with automatic permutation and fault reporting on dry contact

• 316 L stainless steel and nitrile gaskets • Maximum working pressure = 10 bar

DIMENSIONS B

EP

Model

A

SS ES

AL0050 to 1440 430 300 300 520 640 60 128 AL0399 AL0402 to 1600 530 550 500 700 592 135 185 AL0768 AL0808 to 1555 630 550 500 670 592 135 185 AL1347

F

Model

H

SP

D

G

E

C

EP Primary inlet (threaded)

SP Primary outlet (threaded)

ES Secondary inlet (threaded.

SS Secondary outlet

or flat flange)

126

(threaded)

A B C D E F G H (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

AL0050 to AL0233 AL0261 to AL0399 AL0402 to AL0768 AL0808 to AL0924 AL0955 to AL1347

EP* (ø)

SP* (ø)

1’’

ES* (ø/DN)

SS* (ø)

1’’

1’’

1/4

1’’

1’’1/4

1’’

1’’1/4

1’’

1’’1/2

1’’1/2

40

1’’1/2

1’’1/2

2’’

50

2’’

2’’

2’’

50

2’’


MODELS AVAILABLE AND TECHNICAL SPECIFICATIONS Standard primary double pump model

AL0050S AL0050D

Power Power Primary Secondary (kW) Primary flow rate Secondary Single Double Secondary (kW) flow Prim. = P= ∆P ∆P charge charge (m³/h) Technical rate ∆P 90°C (m³/h available 80°C available DHW = pump pump connection DHW (mWC*) = (mWC*) DHW = (mWC*) 10/55°C No. No. 10/55°C 10/55°C 90°C) A705..25

50

1,25

1

0,96

3,1

AL19

AL2

1

37

Power Weight (kW) (kg) Prim. = 2 70°C single DHW = pumps 10/55°C 24

63

AL0086S AL0086D

A707..25

86

1,80

1

1,64

4,1

AL1

AL2

1

66

45

66

AL0115S AL0115D

A709..25

115

2,20

1

2,20

4,2

AL1

AL2

1

90

63

66

AL0143S AL0143D

A711..25

143

2,60

1

2,73

4,2

AL1

AL2

1

112

79

67

AL0170S AL0170D

A713..25

170

3,00

1

3,27

4,2

AL1

AL2

1

134

96

68

AL0198S AL0198D

A715..25

198

3,40

1

3,78

4,2

AL1

AL2

1

156

112

69

AL0220S AL0220D

A717..25

220

3,70

1

4,20

4,0

AL1

AL2

1

175

126

70

AL0233S AL0233D

A719..25

233

3,80

1

4,45

3,6

AL1

AL2

1

185

134

70

AL0261S AL0261D

A719..32

261

4,40

1

4,99

4,5

AL3

AL4

1

207

149

86

AL0278S AL0278D

A721..32

278

4,60

1

5,31

4,3

AL3

AL4

1

221

160

86

AL0295S AL0295D

A723..32

295

4,80

1

5,64

4,1

AL3

AL4

1

235

170

87

AL0317S AL0317D

A725..32

317

5,10

1

6,06

4,0

AL3

AL4

1

253

184

88

AL0329S AL0329D

A727..32

329

5,20

1

6,27

3,8

AL3

AL4

1

262

191

89

AL0344S AL0344D

A729..32

344

5,40

1

6,57

3,7

AL3

AL4

1

276

201

89

AL0355S AL0355D

A731..32

355

5,50

1

6,78

3,5

AL3

AL4

1

285

209

90

AL0366S AL0366D

A733..32

366

5,60

1

6,97

3,4

AL3

AL4

1

294

216

91

AL0376S AL0376D

A735..32

376

5,70

1

7,18

3,3

AL3

AL4

1

302

223

92

AL0386S AL0386D

A737..32

386

5,80

1

7,36

3,2

AL3

AL4

1

311

229

92

AL0399S AL0399D

A741..32

399

5,90

1

7,62

2,9

AL3

AL4

1

323

239

94

AL0402S AL0402D A1314..40

402

8,90

1

7,68

6,0

AL13

AL14

1

330

242

201

AL0458S AL0458D A1316..40

458

9,70

1

8,75

5,8

AL13

AL14

1

377

275

203

AL0510S AL0510D A1318..40

510

10,3

1

9,74

5,5

AL13

AL14

1

420

303

204

AL0558S AL0558D A1320..40

558

10,8

1

10,66

5,1

AL13

AL14

1

460

328

206

AL0605S AL0605D A1322..40

605

11,3

1

11,56

4,9

AL13

AL14

1

494

353

207

AL0648S AL0648D A1324..40

648

11,7

1

12,38

4,7

AL13

AL14

1

523

375

208

AL0688S AL0688D A1326..40

688

12,0

1

13,15

4,4

AL13

AL14

1

548

394

210

AL0721S AL0721D A1328..40

721

12,3

1

13,78

4,2

AL13

AL14

1

573

413

211

AL0745S AL0745D A1330..40

745

12,5

1

14,24

3,9

AL13

AL14

1

592

428

212

AL0768S AL0768D A1332..40

768

12,7

1

14,67

3,6

AL13

AL14

1

612

444

214

AL0808S AL0808D A2330..40

808

14,2

1

15,44

4,5

AL15

AL16

1

650

468

236

AL0846S AL0846D A2332..40

846

14,5

1

16,17

4,3

AL15

AL16

1

674

486

237

AL0878S AL0878D A2334..40

878

14,8

1

16,78

4,1

AL15

AL16

1

698

504

239

AL0901S AL0901D A2336..40

901

15,0

1

17,22

3,9

AL15

AL16

1

717

520

240

AL0924S AL0924D A2338..40

924

15,2

1

17,66

3,7

AL15

AL16

1

736

534

242

AL0955S AL0955D A2334..50

955

17,5

1

18,25

4,8

AL15

AL16

1

788

565

242

AL0997S AL0997D A2336..50

997

17,9

1

19,05

4,7

AL15

AL16

1

816

586

244

AL1038S AL1038D A2338..50

1 038

18,2

1

19,83

4,5

AL15

AL16

1

841

605

245

AL1076S AL1076D A2340..50

1 076

18,5

1

20,56

4,4

AL15

AL16

1

865

624

246

AL1114S AL1114D A2342..50

1 114

18,8

1

21,29

4,3

AL15

AL16

1

888

642

248

AL1146S AL1146D A2344..50

1 146

19,1

1

21,90

4,1

AL15

AL16

1

911

659

249

AL1173S AL1173D A2346..50

1 173

19,4

1

22,41

4,0

AL15

AL16

1

934

677

250

AL1196S AL1196D A2348..50

1 196

19,6

1

22,85

3,8

AL15

AL16

1

953

692

252

AL1217S AL1217D A2350..50

1 217

19,8

1

23,25

3,6

AL15

AL16

1

971

706

253

AL1239S AL1239D A2352..50

1 239

20,0

1

23,67

3,5

AL15

AL16

1

989

721

254

AL1254S AL1254D A2346..50-B 1 254

21,7

1

23,96

4,5

AL7

AL8

1

1 014

732

253

AL1289S AL1289D A2348..50-B 1 289

21,9

1

24,63

4,4

AL7

AL8

1

1 035

747

254

AL1323S AL1323D A2350..50-B 1 323

22,1

1

25,28

4,3

AL7

AL8

1

1 054

763

256

AL1347S AL1347D A2352..50-B 1 347

22,3

1

25,74

4,1

AL7

AL8

1

1 074

778

257

DOMESTIC HOT WATER

Standard primary single pump model

3

127


DHW CYLINDER STORAGE 300 to  6, 000

litres

The DHW storage cylinder is designed for use with energy production or recovery systems to amass a reserve of water to meet peaks in demands. If required, a backup system can be used to supplement the energy. This device has been specially designed to meet the production and storage needs of domestic hot water in the residential and manufacturing sectors. There are five different types of tank available to meet all needs : Carbon steel with coating Version

RC851

RC951

Capacity

0,3 à 6 m3

0,3 à 6 m3

T° maxi

85°C constant

95°C peak

+

+

Special resistance to chlorinated shocks

Stainless steel DUPLEX 316L STAINLESS STAINLESS STEEL STEEL 0.3 to 3 m3 0.3 to 3 m3 95°C 95°C constant constant

+++

Enamelled steel

++

S235 0.3 to 3 m3 99°C constant

+++

ADvantages • Inspection manhole ø 400 mm*: - Easy to maintain. - Thermal equipment can be installed at a later date. • Significant hot water storage capacity to meet peaks in demand. • Less heat generator operating cycles. • Temperature stability for distributed DHW. • Water can be stored at a constant temperature of up to 99°C (depending on the model).

• Can be combined with any energy recovery or production systems. • Delivered to site with pre-assembled insulation (for carbon and stainless steel cylinders only). Insulation can be easily removed if required. • Insulated bottom and manhole as standard. • Extended warranty for stainless steel version. • Non-standard versions are available on request.

*For carbon steel cylinders with coating and stainless steel cylinders: nozzle ø 250 mm on the 300 L version. For enamelled steel cylinders: manhole ø 400 mm for the 750 to 3 000 litre version (or handhole DN 110 mm for the 300 to 3,000 L version)

128


OPERATING PRINCIPLES

19 15

Co

nt ro l

12

5

14

DOMESTIC HOT WATER

20

21 1

11

Solar regulation

12 3

3

18

10

19

3

13 3

Y

9

3 7

15

5

16 14

8

3

17 4

7

6

3 1 2

1 Cold water inlet 2 Meter 3 Temperature sensors

7 Circulators (7’) 8 Solar module 9 Solar vessel

4 Expansion vessel 5 Tank

10 Solar cell 11 Sunlight sensor

6 Valve

12 Regulator

13 Thermometer 14 Solar PLAKEO® 15 Domestic hot water loop

return 16 Electrical backup 17 Manhole

18 Mixing valve 19 Distribution of

domestic hot water

20 Boiler 21 Heating network

129


“PREFERENCE” range 300 to 6,000 litres SPECIFICATION

RC Optimised connections

CE compliance • 97/23/CE

Cylinder with "RC" coated carbon steel tank

Reinforced thermal insulation

Tank • Vertical carbon steel tank with 3 feet. • 300 to 6,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1). (handhole with a diameter of 250 mm for 300 litres) Note : Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating • Finished with “RC851” coating (Maximum temp = 85°C constant). WRAS approved material • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 fire rated: • High-performance mineral wool - 60 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 50 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Options • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • “RC951” finish (T-max = 95°C peak). • Other thicknesses of insulation. • Non-standard versions available on request.

Warranties

(in accordance with our general conditions of sale) • Tank = 5 years. • Accessories = 1 year.

130

Inspection manhole


DIMENSIONS øD

AN1 Threaded nozzle 40/49 .

EC

for anode

AN2 Threaded nozzle 40/49 for

2nd anode (Volume ≥ 4m3)

TM DA

DA Outlet/loop return EC Hot water outlet

TT

EF Cold water inlet PI Support feet AN2

TM Nozzles for thermometer

AN1

TO Manhole with an internal

diameter of 400 mm (handhole with a diameter of 250 mm for 300 litres)

TH

TT Nozzles for thermostat (or

H

DA

PT100 probe)

VM Threaded drainage outlet J

TT

VM

180°

TM Capacity – TT (litres) (G int. thread)

EC VM

EF DA

DA EF TT

90°

270°

AN1 AN2 TH TM 315°

EF (G int. thread) DA-VM (G ext. thread)

300 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

5 000

DN15

DN50

6 000

DN15

DN50

Capacity (litres) 300 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

A (mm) 90 90 90 90 90 90 90 90 90 90 90 110 110 110

B (mm) 395 410 440 440 475 475 510 510 560 560 560 630 630 630

C (mm) 545 560 590 590 650 650 685 685 745 745 745 855 855 855

øD (mm) 550 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300 1 500 1 500 1 500

E (mm) 565 660 690 690 725 725 760 760 810 810 810 860 860 860

F (mm) 685 860 890 890 925 925 960 960 1 010 1 010 1 010 1 060 1 060 1 060

EC

Weight (kg)

DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN80 flat flange DN80 flat flange

95 140 175 210 235 280 290 345 400 430 470 680

G1 (mm) G2 (mm) 850 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450 1 530 1 780 1 880 2 130 2 160 2 410

H (mm) 1 535 1 820 1 880 2 430 1 960 2 510 2 020 2 570 2 110 2 350 2 660 2 790 3 490 3 990

DOMESTIC HOT WATER

PI

A

B

EF

E

C

F

G1

G2

EF

3

790 890

J (mm) 1 155 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120 2 185 2 805 3 305

Note : H = High version ; B = Low version. Dimensions of models without a manhole are available on request.

(1)

131


MODELS AVAILABLE Capacity (litres) 300 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

Standard model with a 60 mm-M1 jacket Cooling Without With manhole constant manhole (Wh/day.K.L)

Standard model with a 50 mm-M0 jacket Without manhole Without With manhole Cooling constant manhole (Wh/day.K.L)

PRT030M1B PRT050M1V PRT075M1V PRT100M1HV PRT100M1BV PRT150M1HV PRT150M1BV PRT200M1HV PRT200M1BV PRT250M1V PRT300M1V PRT400M1V PRT500M1V PRT600M1V

PRT030M0B PRT050M0V PRT075M0V PRT100M0HV PRT100M0BV PRT150M0HV PRT150M0BV PRT200M0HV PRT200M0BV PRT250M0V PRT300M0V PRT400M0V PRT500M0V PRT600M0V

PRT030M1 PRT050M1 PRT075M1 PRT100M1H PRT100M1B PRT150M1H PRT150M1B PRT200M1H PRT200M1B PRT250M1 PRT300M1 -

0,125 0,098 0,080 0,075 0,068 0,063 0,060 0,055 0,052 0,05 0,048 0,042 0,040 0,039

Note : H = High version ; B = Low version.

(1)

OPTIONS Reference KA1

132

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve

PRT030M0 PRT050M0 PRT075M0 PRT100M0H PRT100M0B PRT150M0H PRT150M0B PRT200M0H PRT200M0B PRT250M0 PRT300M0 -

0,173 0,136 0,111 0,103 0,094 0,088 0,083 0,077 0,072 0,069 0,067 0,058 0,056 0,054


“DPX” DUPLEX STAINLESS STEEL range 300 to 3,000 litres

SPECIFICATION

DPX Optimised connections

DUPLEX stainless steel

CE compliance • 97/23/CE

Reinforced thermal insulation

Inspection manhole

• Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1) (handhole with a diameter of 250 mm for 300 litres). • T-max = 95°C constant. Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 fire rated: • High-performance mineral wool 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

DOMESTIC HOT WATER

Tank

3

Options • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • Other thicknesses of insulation.

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • Accessories = 1 year.

133


DIMENSIONS øD

EC

DA

TT

TM TH

H

DA

DA Outlet/loop return L

J

K

TT

EC Hot water outlet EF Cold water inlet

G

EF

E’

PI Support feet TH Manhole with an

E

F

internal diameter of 400 mm (handhole with a diameter of 250 mm for 300 litres)

B

EF

TM Nozzle for thermometer TT Nozzles for thermostat A

(or PT100 probe)

PI

VD DN50 drainage

VD

270°

EC VD

DA EF TM TT

DA EF

180°

90°

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

134

A (mm) B (mm) øD (mm) 550 90 395 650 90 410 790 90 440 790 90 440 1 100 90 510 1 250 90 560 1 250 90 560 1 250 90 560

TH

TM-TT EC-EF-DA-VD Weight Capacity (G int. thread) (G ext. thread) (kg) (litres) 300 DN15 DN50 95 500 DN15 DN50 140 750 DN15 DN50 175 1 000 DN15 DN50 210 1 500 DN15 DN50 290 2 000 DN15 DN50 400 2 500 DN15 DN50 430 3 000 DN15 DN50 470

E (mm) E’ (mm) F (mm) 545 685 565 560 860 660 590 890 690 590 890 690 685 960 760 745 1 010 810 745 1 010 810 745 1 010 810

G (mm) H (mm) 1 535 855 1 820 1 030 1 880 1 060 2 430 1 390 2 020 1 130 2 110 1 180 2 660 1 510 2 880 1 640

J (mm) 1 030 1 295 1 325 1 875 1 390 1 425 1 975 2 195

K (mm) 1 155 1 420 1 450 2 000 1 520 1 570 2 120 2 340

L (mm) 1 180 1 445 1 475 2 025 1 545 1 595 2 145 2 365


MODELS AVAILABLE Capacity t(litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

Standard model with a 100 mm-M1 jacket DXT030M11B DXT050M11V DXT075M11V DXT100M11V DXT150M11V DXT200M11V DXT250M11V DXT300M11V

Cooling constant (Wh/day.K.L) 0.077 0.060 0.049 0.046 0.037 0.032 0.031 0.030

Standard model with a 100 mm-M0 jacket DXT030M01B DXT050M01V DXT075M01V DXT100M01V DXT150M01V DXT200M01V DXT250M01V DXT300M01V

Cooling constant (Wh/day.K.L) 0.091 0.072 0.058 0.054 0.044 0.038 0.036 0.035

Reference

KA1

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve

DOMESTIC HOT WATER

OPTIONS

3

135


“GLASS LINED” range 300 to 3,000 litres

SPECIFICATIOn

GL Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank). Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating

• Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 - Euroclass B fire rated (λ = 0,037 W/m/K) : • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K) : • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Options • Electrical kits with immersion heating elements from 3 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 3 to 30 kW, depending on the capacity of the tanks.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

136


Dimensions

DN110 handhole (from 300 to 3,000 litres)

DOMESTIC HOT WATER

ø 400 mm inspection manhole (from 750 to 3,000 litres)

36

3

ø2

ø2

ø 1/2

2 or 3 anodes according to model

ø2

øA

C

B

øK

D

øK

E

ø2

10

0

0

ø2

H

G

F

I

J

10

45°

45°

137


DIMENSIONS Capacity (litres)

ØA (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

Weight with insulation (kg)

300

630

1386

1155

807

472

150

204

204

-

330

90

500

630

1983

1752

1108

472

150

204

204

-

330

125

750

790

1891

1601

1051

501

150

196

196

465

425

230

1 000

790

2244

1956

1246

501

150

196

196

465

425

280

1 500

1100

2073

1700

1140

600

200

221

221

620

580

400

2 000

1100

2261

1888

1244

600

200

221

221

620

580

430

2 500

1400

2136

1680

1180

680

200

216

216

730

730

560

3000

1400

2263

1808

1250

680

200

216

216

730

730

590

MODELS AVAILABLE Capacity (litres)

Standard model with a 50 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

300

-

EMT030M1B

0,000260

-

EMT030M0B

0,000167

500

-

EMT050M1B

0,000240

-

EMT050M0B

0,000148

750

EMT075M1V

EMT075M1B

0,000184

EMT075M0V

EMT075M0B

0,000123

1000

EMT100M1V

EMT100M1B

0,000140

EMT100M0V

EMT100M0B

0,000108

1500

EMT150M1V

EMT150M1B

0,000123

EMT150M0V

EMT150M0B

0,000096

2000

EMT200M1V

EMT200M1B

0,000109

EMT200M0V

EMT200M0B

0,000085

2500

EMT250M1V

EMT250M1B

0,000098

EMT250M0V

EMT250M0B

0,000077

3000

EMT300M1V

EMT300M1B

0,000093

EMT300M0V

EMT300M0B

0,000073

Capacity (litres)

138

Standard model with a 50 mm-M1 jacket

Standard model with a 100 mm-M1 jacket

Standard model with a 100 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

300

-

EMT030M11B

0,000153

-

EMT030M01B

0,000113

500

-

EMT050M11B

0,000132

-

EMT050M01B

0,000104

750

EMT075M11V

EMT075M11B

0,000101

EMT075M01V

EMT075M01B

0,000085

1000

EMT100M11V

EMT100M11B

0,000090

EMT100M01V

EMT100M01B

0,000074

1500

EMT150M11V

EMT150M11B

0,000076

EMT150M01V

EMT150M01B

0,000067

2000

EMT200M11V

EMT200M11B

0,000062

EMT200M01V

EMT200M01B

0,000059

2500

EMT250M11V

EMT250M11B

0,000059

EMT250M01V

EMT250M01B

0,000053

3000

EMT300M11V

EMT300M11B

0,000052

EMT300M01V

EMT300M01B

0,000051


options Electrical kits with immersion heating elements Reference Mounted on DN110 handhole KEB03B (from 300 to 3.000 litres)

-

3

KEB09B (from 300 to 3.000 litres)

KEB09V (from 750 to 3.000 litres)

9

KEB15B (from 300 to 3.000 litres)

KEB15V (from 750 to 3.000 litres)

15

KEB30B (from 300 to 3.000 litres)

KEB30V (from 750 to 3.000 litres)

30

-

KEB45V (from 750 to 3.000 litres)

45

-

KEB60V (from 750 to 3.000 litres)

60

Electrical kits with steatite heating elements Reference

Power (kW)

KES03 (from 750 to 3.000 litres)

3 (1x3kW)

KES06 (from 750 to 3.000 litres)

6 (2x3kW)

KES09 (from 750 to 3.000 litres)

9 (3x3kW)

KES12 (from 750 to 3.000 litres)

12 (4x3kW)

KES15 (from 750 to 3.000 litres)

15 (5x3kW)

KES18 (from 2500 to 3.000 litres)

18 (3x6kW)

KES24 (from 2500 to 3.000 litres)

24 (4x6kW)

KES30 (from 2500 to 3.000 litres)

30 (5x6kW)

DOMESTIC HOT WATER

Power (kW) Mounted on ø 400 mm inspection manhole

3

139


DHW COIL CYLINDER 300 to  3,000 LITRES

Thanks to its considerable power, the coil cylinder represents an economical and high-performance solution suitable for use with all types of energy. It has been specifically designed to meet domestic hot water production and storage needs both in the residential and manufacturing sectors. The presence of one or two coils makes way for several operating modes: • One coil version (lower): - Preheating from a renewable energy source; - Heating by a heat generator. • Dual coil version (lower + upper): - Recovery (lower coil) + backup (upper coil); - Heating with two coils (for maximum power). An electric immersion heater can be used to provide additional energy. The DHW coil heat exchanger system is available in three different types of tank to meet all needs: Enamelled carbon steel

Stainless steel Version Capacity T-max Special resistance to chlorinated shocks

140

DUPLEX STAINLESS STEEL

316L STAINLESS STEEL

S235

0,3 à 3 m3 95°C en continu

0,3 à 3 m3 95°C en continu

0,3 à 3 m3 99°C constant

+++

++

+++


ADVANTAGES • Multi-purpose: - Energy recovery; - Heating possible from any kind of energy. - Particularly suited for use with energy recovery (heat pump, cooler unit) and production (solid or gaseous fuel boilers, electric, etc.) systems. • Accelerated heating: coil(s) with large exchange surface area. • Inspection manhole ø 400mm*: - Easy to maintain; - Thermal equipment can be installed at a later date. • Significant water storage capacity to meet peaks in demand. • Temperature stability for distributed DHW.

• Water can be stored at a constant temperature of up to 110°C. • Reduced Greenhouse Gas Emissions. • Less heat generator operating cycles. • Cost-effective solution (heating element directly inttegrated into the tank). • Quick and easy installation: equipment delivered to site with pre-assembled insulation (for stainless steel cylinders only). Insulation can be easily removed if required. • Extended warranty. • Non-standard version available on request (cylinder with a single heater in the top section upon request). *Only for enamelled steel cylinders: manhole ø 400 mm for the 750 to 3,000 litres version (or handhole DN 110 mm for the 300 to 3,000 L version)

Version with one lower coil for preheating the heat pump Regulator

4 1 Classic heat

pump

DOMESTIC HOT WATER

OPERATING PRINCIPLES

2 Tank 3 Cold water

inlet

1

4 Distribution

3

3 2

Version with one lower coil for preheating the boiler Regulator

3

1 Tank 2 Cold water

inlet

3 Distribution

2 Y

1

141


OPERATING PRINCIPLES

Two-coil version Solar pre-heater + boiler heating Regulator

6 1

Y

2 5 4 3

1 Solar cell

4 Tank

2 Solar module

5 Cold water inlet

3 Drainage outlet

6 Distribution

Two-coil version Boiler heating Regulator

4

3 Y 1 Drainage

outlet

2 Tank

142

3 Cold water inlet 4 Distribution

2 1


“DPX” DUPLEX STAINLESS STEEL range Single coil 300 to 3,000 litres SPECIFICATION

DPX Optimised connections

CE compliance • 97/23/CE

DUPLEX stainless steel

Reinforced thermal insulation

Tank

Removable thermal insulation (including the bottom of the tank) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Coil exchanger

made of 316 L stainless steel.

DOMESTIC HOT WATER

• Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • DN125 handhole.

3

Options • Back up electric immersion heater : - Electrical elements with Incoloy pins. - DN40 threaded cap up to 12 kW, M77 beyond that. - Three-phase voltage of 230/400 up to 24 kW, three-phase 400/400 V beyond that. - Immersion heater fixing: on the tank. - Temperature regulation: - Electrical power ≤ 20 kW: Three-phase control/ safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cable switch). - Electrical power ≤ 20 kW: Double unipolar safety thermostat. • Non-standard versions available on request. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • Tank made of AISI 316L stainless steel. • Other thicknesses of insulation.

Warranties

(in accordance with our general conditions of sale) • Tank and coil = 7 years. • Other workstations = 1 year.

143


DIMENSIONS

øD

EC

DA

TT

TM TP PS H

DA

DA Outlet/loop return EC Hot water outlet

M

J

TT G

EF Cold water inlet PI Support feet

PS

B

C

E

L

F

PS Nozzles for coil TM Nozzles for

thermometere

TP DN125 handhole

EF

TT Nozzles for thermostat

(or PT100 probe)

A

VD DN50 drainage

PI

VD

Note: TM is positioned at 90° on the 300 L version.

270°

EC VD

DA EF TM TT DA PS

180°

TP

90°

EC-EF PS J L M TM-TT (G E F G B C H øD Capacity A DA-VD (G-ext. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) int. thread) (G ext. thread) nozzle) (litres) 300 90 395 545 550 675 865 1 180 1 535 1 180 795 1 055 DN15 DN50 DN25 500 90 410 560 650 710 1 010 1 295 1 820 1 445 950 1 295 DN15 DN50 DN25 750 90 440 590 790 740 1 045 1 325 1 880 1 475 980 1 290 DN15 DN50 DN25 1 000 90 440 590 790 740 1 170 1 875 2 430 2 025 1 115 1 800 DN15 DN50 DN25 1 500 90 510 685 1 100 860 1 100 1 390 2 020 1 545 950 1 390 DN15 DN50 DN40 2 000 90 560 745 1 250 930 1 175 1 425 2 110 1 595 1 040 1 425 DN15 DN50 DN40 2 500 90 560 745 1 250 930 1 175 1 975 2 660 2 145 1 100 1 880 DN15 DN50 DN40 3 000 90 560 745 1 250 930 1 225 2 195 2 880 2 365 1 160 2 130 DN15 DN50 DN40

144

Weight (kg) 105 145 195 240 340 460 500 550


TECHNICAL SPECIFICATIONS OF LOWER COIL Model

ØD (mm)

DN

S (m2)

300 500 750 1 000 1 500 2 000 2 500 3 000

550 650 790 790 1 100 1 250 1 250 1 250

25 25 25 25 40 40 40 40

1,1 1,8 2,4 3 3,5 4,1 4.6 5,1

Power (kW) : 55/45 – 10/40 °C (HP) Flow rate Power Δp (mbar) (m3/h) (kW) 0.65 7.5 20 1.2 13.5 55 1.7 19.5 95 2.2 25 155 1.92 22 40 2.5 29 45 2.94 34 50 3.3 38 55

Power (kW) : 90/70 – 10/55 °C (boiler) Flow rate Power Δp (mbar) (m3/h) (kW) 1.5 35 50 2.6 60 140 3.7 85 280 4.8 110 510 4.4 100 90 5.6 130 120 6.5 150 160 7.6 175 200

Note : 100 mbar = 1 meter of water column (1mWC).

Capacity (litres)

M1 reference

300 500 750 1 000 1 500 2 000 2 500 3 000

DSI030033M11 DSI050045M11 DSI075063M11 DSI100074M11 DSI150088M11 DSI200107M11 DSI250145M11 DSI300145M11

Cooling constant (Whr/day.K.L) 0.077 0.060 0.049 0.046 0.037 0.032 0.031 0.030

M0 reference DSI030033M01 DSI050045M01 DSI075063M01 DSI100074M01 DSI150088M01 DSI200107M01 DSI250145M01 DSI300145M01

Cooling constant (Whr/day.K.L) 0.091 0.072 0.058 0.054 0.044 0.038 0.036 0.035

DOMESTIC HOT WATER

MODELS AVAILABLE

3

OPTIONS Reference

Description

KA1

Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

145


“DPX” DUPLEX STAINLESS STEEL range Dual coil 500 to 3,000 litres SPECIFICATION

DPX Optimised connections

DUPLEX stainless steel

CE compliance • 97/23/CE

Reinforced thermal insulation

Tank • Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • DN125 handhole.

Removable thermal insulation

(including the bottom of the tank) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Coil exchangers made of 316 L stainless steel. Options • Back up electric immersion heater : - Electrical elements with Incoloy pins. - DN40 threaded cap up to 12 kW, M77 beyond that. - Three-phase voltage of 230/400 up to 24 kW, three-phase 400/400 V beyond that. - Immersion heater fixing: on the tank. - Temperature regulation: - Electrical power ≤ 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cable switch). - Electrical power ≤ 20 kW: Double unipolar safety thermostat. • Non-standard versions available on request. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • Tank made of AISI 316L stainless steel. • Other thicknesses of insulation.

Warranties (in accordance with our general conditions of sale) •T  ank and coils = 7 years. • Other workstations = 1 year.

146


DIMENSIONS øD

EC

TT

PS

TM PM TP PS

H

DA PS

C

E

L

PS

DOMESTIC HOT WATER

F

M

G

N

J

TT

A

B

EF

PI

VD DA Outlet / loop return EC Hot water outlet

270°

EC VD

EF Cold water inlet PI Support feet

3

PM Threated nozzle

for transportation/ untapped tank

DA EF TM TT PM PS

PS Nozzles for coils TM Nozzles for

thermometer

180°

TP DN125 handhole TT Nozzle for

thermostat (or PT100 probe)

TP

VD DN50 drainage

90°

PS Weight Capacity A TM-TT (G EC-EF DA-VD (G-ext. J L M E F G N B C øD H (litres) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) int. thread) (G ext. thread) tread) (kg) 500 90 410 560 650 710 1 010 1 295 1 820 1 445 950 1 125 1 440 DN15 DN50 DN25 145 750 90 440 590 790 740 1 045 1 325 1 880 1 475 980 1 110 1 470 DN15 DN50 DN25 195 1 000 90 440 590 790 740 1 170 1 875 2 430 2 025 1 115 1 595 2 000 DN15 DN50 DN25 240 1 500 90 510 685 1 100 860 1 100 1 390 2 020 1 545 950 1 245 1 520 DN15 DN50 DN40 340 2 000 90 560 745 1 250 930 1 175 1 425 2 110 1 595 1 040 1 270 1 570 DN15 DN50 DN40 460 2 500 90 560 745 1 250 930 1 175 1 975 2 660 2 145 1 100 1 700 2 060 DN15 DN50 DN40 500 3 000 90 560 745 1 250 930 1 225 2 195 2 880 2 365 1 160 1 920 2 340 DN15 DN50 DN40 550

147


TECHNICAL SPECIFICATIONS Lower coil Model

ØD (mm)

DN

Surface area (m2)

500 750 1 000 1 500 2 000 2 500 3 000

650 790 790 1 100 1 250 1 250 1 250

25 25 25 40 40 40 40

1,8 2,4 3 3,5 4,1 4.6 5,1

Power (kW) : 55/45 - 10/40°C (PAC) Flow rate Power (kW) Δp (mbar) (m3/h) 1.2 13.5 55 1.7 19.5 95 2.2 25 155 1.92 22 40 2.5 29 45 2.94 34 50 3.3 38 55

Power (kW) : 90/70 - 10/55°C (boiler) Flow rate Power (kW) Δp (mbar) (m3/h) 2.6 60 140 3.7 85 280 4.8 110 510 4.4 100 90 5.6 130 120 6.5 150 160 7.6 175 200

Note : 100 mbar = 1 meter of water column (1mWC)

Upper coil Model

Ø (mm)

DN

Surface area (m2)

500 750 1 000 1 500 2 000 2 500 3 000

650 790 790 1 100 1 250 1 250 1 250

25 25 25 40 40 40 40

1.0 1,6 1,8 2,1 2,6 3,1 3,6

Power (kW) : 90/70 - 10/55°C (boiler) Power (kW) Δp (mbar) Flow rate (m3/h) 1.3 30 40 2.25 52 95 2.6 60 120 2.4 55 30 3.0 70 30 3.9 90 55 4.6 105 65

Note : 100 mbar = 1 meter of water column (1mWC)

Combined upper and lower coils (connected in a series) Model

Ø (mm)

DN

Surface area (m2)

500 750 1 000 1 500 2 000 2 500 3000

650 790 790 1 100 1 250 1 250 1 250

25 25 25 40 40 40 40

2,8 4,0 4,8 5,6 6,7 7,7 8,7

Power (kW) : 90/70 - 10/55°C Power Flow rate Δp (mbar) (kW) (m3/h) 4.6 90 510 6.6 137 1 170 8.0 170 1 950 8.0 155 320 10.2 200 480 12.2 240 560 13.9 280 650

Power (kW) : 90/65 - 10/55°C low rate Power Δp (mbar) (m3/h) (kW) 3.1 90 290 4.7 135 680 5.7 165 1 090 5.6 160 190 7.1 205 270 8.3 240 450 9.6 276 510

Note : 100 mbar = 1 meter of water column (1mWC)

MODELS AVAILABLE Capacity (litres) 500 750 1 000 1 500 2 000 2 500 3 000

148

M1 reference DSD050045027M11 DSD075063044M11 DSD100074044M11 DSD150088055M11 DSD200107084M11 DSD250145084M11 DSD300145084M11

Cooling constant (Whr/day.K.L) 0.060 0.049 0.046 0.037 0.032 0.031 0.030

M0 reference DSD050045027M01 DSD075063044M01 DSD100074044M01 DSD150088055M01 DSD200107084M01 DSD250145084M01 DSD300145084M01

Cooling constant (Whr/day.K.L) 0.072 0.058 0.054 0.044 0.038 0.036 0.035


OPTIONs

Reference KA1

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve

Integrated loop heater (ILH kits for DHW cylinders)

Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder.

DOMESTIC HOT WATER

• Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat.

3

149


“GLASS LINED” range Single coil 300 to 3,000 litres

SPECIFICATIOn

GL Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank).

Note: Compliant with the recommendations of the Directorate-General for Health

Internal coating

• Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation (including the inspection manhole and the bottom dished end) M1 - Euroclass B fire rated (λ = 0,037 W/m/K): • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K): • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Coil exchanger made of enamelled steel. Options • Electrical kits with immersion heating elements from 3 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 3 to 30 kW, depending on the capacity of the tanks.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

150


36

Dimensions ø2

ø2

ø 1/2

2 or 3 anodes according to model

C

B

ø2

DOMESTIC HOT WATER

G

H

F

E

D

ø2

3

K

L

I

øA

45° J

45°

ø2

Capacity (litres)

ØA (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

K (mm)

L (mm)

300

630

1386

1155

807

472

150

204

36

982

472

-

330

500

630

1983

1752

1108

463

150

204

36

1615

495

-

330

750

790

1891

1601

1051

501

150

196

34

1623

501

465

425

1 000

790

2244

1956

1246

501

150

196

34

1929

501

465

425

1 500

1100

2073

1700

1150

600

200

221

32

1722

600

620

580

2 000

1100

2261

1885

1244

600

200

221

32

1722

600

620

580

2 500

1400

2136

1680

1180

680

200

216

31

1587

650

730

730

3000

1400

2269

1808

1245

680

200

216

31

1587

650

730

730

151


SPECIFICATION OF LOWER COIL Power (Kw) 55/45 10/40°C (HP) Diameter A (mm)

Exchange surface area (m²)

300

630

500

Model

Power (Kw) 90/70 - 10/55°C (boiler)

Flow rate (m3/h)

Power (kW)

Head loss (mbar)

2

1,2

14

630

3

1,8

750

790

4

1000

790

1500

Flow rate (m3/h)

Pu (kW)

Head loss (mbar)

58

2,9

67

158

21

85

4,3

100

235

2,4

28

110

5,7

133

311

5.2

3,1

37

143

7,4

173

404

1100

5,5

3,3

39

151

7,9

183

429

2000

1100

5,5

3,3

39

151

7,9

183

429

2500

1400

6

3,6

42

165

8,6

200

468

3000

1400

6

3,6

42

165

8,6

200

468

Note : 100 mbar = 1 meter of water column (1mWC)

MODELS AVAILABLE Standard model with a 50 mm-M1 jacket Capacity (litres) 300

With ø 400 mm inspection manhole

With DN110 handhole

-

EMI030M1B

0,000260

-

With DN110 handhole

Cooling constant (kWh/24hr)

EMI030M0B

0,000167

500

-

EMI050M1B

0,000240

-

EMI050M0B

0,000148

750

EMI075M1V

EMI075M1B

0,000184

EMI075M0V

EMI075M0B

0,000123

1000

EMI100M1V

EMI100M1B

0,000140

EMI100M0V

EMI100M0B

0,000108

1500

EMI150M1V

EMI150M1B

0,000123

EMI150M0V

EMI150M0B

0,000096

2000

EMI200M1V

EMI200M1B

0,000109

EMI200M0V

EMI200M0B

0,000085

2500

EMI250M1V

EMI250M1B

0,000098

EMI250M0V

EMI250M0B

0,000077

3000

EMI300M1V

EMI300M1B

0,000093

EMI300M0V

EMI300M0B

0,000073

Standard model with a 100 mm-M1 jacket Capacity (litres) 300

152

Standard model with a 50 mm-M0 jacket

With ø 400 mm Cooling constant inspection (kWh/24hr) manhole

Standard model with a 100 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

-

EMI030M11B

0,000153

-

EMI030M01B

0,000113

500

-

EMI050M11B

0,000132

-

EMI050M01B

0,000104

750

EMI075M11V

EMI075M11B

0,000101

EMI075M01V

EMI075M01B

0,000085

1000

EMI100M11V

EMI100M11B

0,000090

EMI100M01V

EMI100M01B

0,000074

1500

EMI150M11V

EMI150M11B

0,000076

EMI150M01V

EMI150M01B

0,000067

2000

EMI200M11V

EMI200M11B

0,000062

EMI200M01V

EMI200M01B

0,000059

2500

EMI250M11V

EMI250M11B

0,000059

EMI250M01V

EMI250M01B

0,000053

3000

EMI300M11V

EMI300M11B

0,000052

EMI300M01V

EMI300M01B

0,000051


options Electrical kits with immersion heating elements Reference Mounted on DN110 handhole KEB03B (from 300 to 3.000 litres)

-

3

KEB09B (from 300 to 3.000 litres)

KEB09V (from 750 to 3.000 litres)

9

KEB15B (from 300 to 3.000 litres)

KEB15V (from 750 to 3.000 litres)

15

KEB30B (from 300 to 3.000 litres)

KEB30V (from 750 to 3.000 litres)

30

-

KEB45V (from 750 to 3.000 litres)

45

-

KEB60V (from 750 to 3.000 litres)

60

Electrical kits with steatite heating elements Reference

Power (kW)

KES03 (from 750 to 3.000 litres)

3 (1x3kW)

KES06 (from 750 to 3.000 litres)

6 (2x3kW)

KES09 (from 750 to 3.000 litres)

9 (3x3kW)

KES12 (from 750 to 3.000 litres)

12 (4x3kW)

KES15 (from 750 to 3.000 litres)

15 (5x3kW)

KES18 (from 2500 to 3.000 litres)

18 (3x6kW)

KES24 (from 2500 to 3.000 litres)

24 (4x6kW)

KES30 (from 2500 to 3.000 litres)

30 (5x6kW)

DOMESTIC HOT WATER

Power (kW) Mounted on ø 400 mm inspection manhole

3

153


“GLASS LINED” range Dual coil 300 to 3,000 litres

SPECIFICATIOn

GL Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank).

Note: Compliant with the recommendations of the Directorate-General for Health

Internal coating

• Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation (including the inspection manhole and the bottom dished end) M1 - Euroclass B fire rated (λ = 0,037 W/m/K): • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K): • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Coil exchanger made of enamelled steel. Options • Electrical kits with immersion heating elements from 3 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 3 to 30 kW, depending on the capacity of the tanks.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

154


36

Dimensions ø2

ø2

ø 1/2

2 or 3 anodes according to model

ø2

C

B

ø 400

DOMESTIC HOT WATER

G

H

F

E

D

ø2

øA

M

L

K

J

N

I

3 45°

45°

ø2

Capacity (litres)

ØA (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

K (mm)

L (mm)

300

630

1386

1155

807

472

150

204

36

1033

880

778

472

-

330

500

630

1983

1752

1108

472

150

204

36

1390

1033

931

472

-

330

750

790

1891

1601

1051

501

150

196

34

1623

1266

1164

501

465

425

1000

790

2244

1956

1246

501

150

196

34

1674

1317

1215

501

465

425

1500

1100

2073

1700

1150

600

200

221

32

1695

1722

1467

600

620

580

2000

1100

2261

1888

1244

600

200

221

32

1824

1467

1365

600

620

580

2500

1400

2136

1680

1180

680

200

216

31

1689

1434

1332

650

730

730

3000

1400

2263

1808

1250

680

200

216

31

1689

1434

1332

650

730

730

M (mm)

N (mm)

155


SPECIFICATIOn Lower coil Power (Kw) 55/45 10/40°C (HP) Diameter A (mm)

Exchange surface area (m²)

300

630

500

Model

Power (Kw) 90/70 - 10/55°C (boiler)

Flow rate (m3/h)

Power (kW)

Head loss (mbar)

1,2

0,7

8

630

1,5

0,9

750

790

1,9

1 000

790

1 500

Flow rate (m3/h)

Power (kW)

Head loss (mbar)

6

0,7

17

5

11

11

0,9

21

11

1,2

13

21

1,2

27

21

2,4

1,5

17

41

1,4

34

39

1100

2,5

1,5

18

42

1,5

36

39

2 000

1100

2,5

1,5

18

42

1,5

36

39

2 500

1400

2,5

1,5

18

39

1,5

36

50

3 000

1400

2,5

1,5

18

39

1,5

36

50

Note : 100 mbar = 1 meter of water column (1mWC)

Upper coil Power (Kw) 55/45 10/40°C (HP) Diameter A (mm)

Exchange surface area (m²)

300

630

500

Model

Power (Kw) 90/70 - 10/55°C (boiler)

Flow rate (m3/h)

Power (kW)

Head loss (mbar)

0,8

0,5

6

630

1,5

0,9

750

790

1,7

1 000

790

1 500

Flow rate (m3/h)

Power (kW)

Head loss (mbar)

3

0,5

12

3

11

12

0,9

22

11

1

12

14

1

24

19

2,4

1,4

17

36

1,4

34

35

1100

2,5

1,5

18

42

1,5

36

40

2 000

1100

2,5

1,5

18

42

1,5

36

40

2 500

1400

3

1,8

21

47

1,8

42

62

3 000

1400

3

1,8

21

47

1,8

42

62

Note : 100 mbar = 1 meter of water column (1mWC)

MODELS AVAILABLE Standard model with a 50 mm-M1 jacket Capacity (litres) 300

156

With ø 400 mm inspection manhole

With DN110 handhole

-

EMD030M1B

0,000260

Standard model with a 50 mm-M0 jacket

With ø 400 mm Cooling constant inspection (kWh/24hr) manhole

With DN110 handhole

Cooling constant (kWh/24hr)

-

EMD030M0B

0,000167

500

-

EMD050M1B

0,000240

-

EMD050M0B

0,000148

750

EMD075M1V

EMD075M1B

0,000184

EMD075M0V

EMD075M0B

0,000123

1 000

EMD100M1V

EMD100M1B

0,000140

EMD100M0V

EMD100M0B

0,000108

1 500

EMD150M1V

EMD150M1B

0,000123

EMD150M0V

EMD150M0B

0,000096

2 000

EMD200M1V

EMD200M1B

0,000109

EMD200M0V

EMD200M0B

0,000085

2 500

EMD250M1V

EMD250M1B

0,000098

EMD250M0V

EMD250M0B

0,000077

3 000

EMD300M1V

EMD300M1B

0,000093

EMD300M0V

EMD300M0B

0,000073


Standard model with a 100 mm-M1 jacket Capacity (litres)

Standard model with a 100 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

300

-

EMD030M11B

0,000153

-

EMD030M01B

0,000113

500

-

EMD050M11B

0,000132

-

EMD050M01B

0,000104

750

EMD075M11V

EMD075M11B

0,000101

EMD075M01V

EMD075M01B

0,000085

1 000

EMD100M11V

EMD100M11B

0,000090

EMD100M01V

EMD100M01B

0,000074

1 500

EMD150M11V

EMD150M11B

0,000076

EMD150M01V

EMD150M01B

0,000067

2 000

EMD200M11V

EMD200M11B

0,000062

EMD200M01V

EMD200M01B

0,000059

2 500

EMD250M11V

EMD250M11B

0,000059

EMD250M01V

EMD250M01B

0,000053

3 000

EMD300M11V

EMD300M11B

0,000052

EMD300M01V

EMD300M01B

0,000051

Electrical kits with immersion heating elements Reference Mounted on DN110 handhole

Mounted on ø 400 mm inspection manhole

Power (kW)

KEB03B (from 300 to 3.000 litres)

-

3

KEB09B (from 300 to 3.000 litres)

KEB09V (from 750 to 3.000 litres)

9

KEB15B (from 300 to 3.000 litres)

KEB15V (from 750 to 3.000 litres)

15

KEB30B (from 300 to 3.000 litres)

KEB30V (from 750 to 3.000 litres)

30

-

KEB45V (from 750 to 3.000 litres)

45

-

KEB60V (from 750 to 3.000 litres)

60

DOMESTIC HOT WATER

options

3

Electrical kits with steatite heating elements Reference

Power (kW)

KES03 (from 750 to 3.000 litres)

3 (1x3kW)

KES06 (from 750 to 3.000 litres)

6 (2x3kW)

KES09 (from 750 to 3.000 litres)

9 (3x3kW)

KES12 (from 750 to 3.000 litres)

12 (4x3kW)

KES15 (from 750 to 3.000 litres)

15 (5x3kW)

KES18 (from 2500 to 3.000 litres)

18 (3x6kW)

KES24 (from 2500 to 3.000 litres)

24 (4x6kW)

KES30 (from 2500 to 3.000 litres)

30 (5x6kW)

157


“GLASS LINED” range Single coil for heat pump 300 to 3,000 litres

SPECIFICATIOn

GL Optimised connections

Enamelled steel

CE compliance • 97/23/CE

Tank • Vertical steel tank with 3 feet • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10,5 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole (from 750 to 3,000 litres) or DN110 handhole (from 300 to 3,000 litres). • Magnesium protection anode(s) (2 or 3 depending on the capacity of the tank). Note: Compliant with the recommendations of the Directorate-General for Health

Internal coating

• Tank enameled according to DIN 4753-3 • WT = max 99°C • MS520B Enamel Coating WRAS approved material

Removable thermal insulation (including the inspection manhole and the bottom dished end) M1 - Euroclass B fire rated (λ = 0,037 W/m/K): • High-performance mineral wool – 50 or 100 mm thick. • Flexible PVC jacket M0 - Euroclass A2 fire rated (λ = 0,035 W/m/K): • Rockwool – 50 or 100 mm thick. • Isoxal metal sheet jacket.

Coil exchanger made of enamelled steel. Options • Electrical kits with immersion heating elements from 9 to 60 kW, depending on the capacity of the tanks. • Electrical kits with steatite heating elements from 9 to 15 kW, depending on the capacity of the tanks.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Electric equipment and accessories = 1 year.

158


H

Dimensions 2"

2"

B

テク 400

DOMESTIC HOT WATER

F

G

E

D

C

2"

テクA

J

K

L

I

3 45ツー

2"

Capacity (litres)

テ連 (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

H (mm)

I (mm)

J (mm)

K (mm)

L (mm)

500

630

1983

1752

1108

472

150

204

36

1390

472

-

330

750

790

1891

1601

1051

501

150

196

34

1611

501

465

425

1000

790

2244

1956

1246

501

150

196

34

1713

501

465

425

1500

1100

2073

1700

1150

600

200

221

32

1569

600

620

580

2000

1100

2261

1888

1244

600

200

221

32

1671

600

620

580

159


TECHNICAL SPECIFICATIONS OF COIL Power (Kw) 55/45 - 10/40°C LITRES

Ø A (mm)

Exchange surface area (m²)

Power (Kw) 90/70 - 10/55°C

Power (kW)

Δp (mbar)

Surface area of solar cells (m²)

Power (kW)

Δp (mbar)

Surface area of solar cells (m²)

500

630

5,5

3,3

39

466

3,3

77

456

750

790

7

4,2

49

908

4,2

98

891

1000

790

8

4,8

56

1308

4,8

112

1283

1500

1100

9

5,4

63

1761

5,4

126

1721

2000

1100

10

6

70

2468

6

140

2457

Note : 100 mbar = 1 meter of water column (1mWC)

MODELS AVAILABLE Standard model with a 50 mm-M1 jacket Capacity (litres)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

500

-

EMS050M1B

0,000240

-

EMS050M0B

0,000148

750

EMS075M1V

EMS075M1B

0,000184

EMS075M0V

EMS075M0B

0,000123

1 000

EMS100M1V

EMS100M1B

0,000140

EMS100M0V

EMS100M0B

0,000108

1 500

EMS150M1V

EMS150M1B

0,000123

EMS150M0V

EMS150M0B

0,000096

2 000

EMS200M1V

EMS200M1B

0,000109

EMS200M0V

EMS200M0B

0,000085

Standard model with a 100 mm-M1 jacket Capacity (litres)

160

Standard model with a 50 mm-M0 jacket

Standard model with a 100 mm-M0 jacket

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

With ø 400 mm inspection manhole

With DN110 handhole

Cooling constant (kWh/24hr)

500

-

EMS050M11B

0,000132

-

EMS050M01B

0,000104

750

EMS075M11V

EMS075M11B

0,000101

EMS075M01V

EMS075M01B

0,000085

1 000

EMS100M11V

EMS100M11B

0,000090

EMS100M01V

EMS100M01B

0,000074

1 500

EMS150M11V

EMS150M11B

0,000076

EMS150M01V

EMS150M01B

0,000067

2 000

EMS200M11V

EMS200M11B

0,000062

EMS200M01V

EMS200M01B

0,000059


options Electrical kits with immersion heating elements Reference Mounted on DN110 handhole

Mounted on ø 400 mm inspection manhole

Power (kW)

KEB09B (from 750 to 2.000 litres)

KEB09V (from 750 to 2.000 litres)

9

KEB15B (from 750 to 2.000 litres)

KEB15V (from 750 to 2.000 litres)

15

KEB30B (from 750 to 2.000 litres)

KEB30V (from 750 to 2.000 litres)

30

-

KEB45V (from 1.500 to 2.000 litres)

45

-

KEB60V (from 1.500 to 2.000 litres)

60

Reference

Power (kW)

KES09 (from 750 to 2.000 litres)

9 (3x3kW)

KES12 (from 750 to 2.000 litres)

12 (4x3kW)

KES15 (from 750 to 2.000 litres)

15 (5x3kW)

DOMESTIC HOT WATER

Electrical kits with steatite heating elements

3

161


PREPAC DHW CYLINDER MONOBLOC SYSTEM WITH PLATE HEAT EXCHANGER 300 to  6,000

Litres

The PREPAC is a compact monobloc heat exchanger system for domestic hot water comprising a storage tank and a high-performance heat exchange module (plate heat exchanger, circulator, isolating valves, thermostat, stainless steel piping). This semi-instantaneous DHW system provides an economical solution to the problem of hot water with significant variations in flow rates experienced in residential properties. If necessary, a second thermal device can be fitted onto the tank (dual energy operation). The PREPAC is available in four different versions of tank to meet all needs: Carbon steel with coating Version Capacity T-max Special resistance to chlorinated shocks

162

RC851

RC951

0.3 to 6 m3 85째C constant

0.3 to 6 m3 95째C peak

+

+

Stainless steel DUPLEX 316L STAINLESS STAINLESS STEEL STEEL 0.3 to 3 m3 0.3 to 3 m3 95째C constant 95째C constant +++

++


ADVANTAGES

•H  igh-performance (high plate exchange

• T emperature stability for distributed DHW. • Water can be stored at a constant

coefficient). •C  ompact (monobloc unit). •Q  uick and easy to install (unit supplied pre-assembled); •E  asy to maintain (module can be completely dismantled). • Inspection manhole ø 400mm* (depending on the model): - Easy to maintain; - Thermal equipment can be installed at a later date. • S ignificant hot water storage capacity to meet peaks in demand • L ess heat generator operating cycles.

DOMESTIC HOT WATER

temperature of up to 95°C (depending on the model). •C  an be combined with any energy recovery or production systems. •D  elivered to site with pre-assembled insulation (can be easily removed if required). • Insulated bottom and manhole as standard.. • E xtended warranty for stainless steel version. •N  on-standard versions are available on request.

OPERATING PRINCIPLE 1 Heat generator

8 Non-return valve

2 Safety valve

9 Expansion system

3 Automatic air vent valve

10 Heating outlet

4 Isolating valve

11 Heating return

5 Sieve filter

12 PREPAC DHW cylinder

6 Primary pump

13 Cold water inlet

3

3

7 Plate exchanger

7 2

3

6 4

5

6 4

4

9

1

12

8

10

4

9

5 11

13

6

163


“PREFERENCE” range SPECIFICATION

RC Optimised connections

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

Cylinder with "RC" coated carbon steel tank

Reinforced thermal insulation

Tank • Vertical carbon steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1). Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating • Finished with “RC851” coating (maximum temp = 85°C constant). • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint.

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 fire rated: • High-performance mineral wool - 60 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 50 mm thick (40 kg/m3). • Isoxal metal sheet jacket

Equipment • Removable plate exchanger made of AISI 316 stainless steel. • AISI 316 L stainless steel connection pipes. • Secondary stainless steel circulator. • Double safety thermostat 0/90°C. • Exchanger/circulator insulation valve.

Options • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • “RC951” finish (T-max = 95°C peak). • Other thicknesses of insulation. • Non-standard versions available on request.

Warranties (in accordance with our general conditions of sale) • Tank = 5 years. • Accessories = 1 year.

164

Inspection manhole


DIMENSIONS AN1 Threaded nozzle

EF Cold water inlet

40/49 for anode

CS Secondary

With manhole

circulator

1

TG Sleeves 15/21 for

1 Primary

thermometers and thermostat

exchanger inlet

2 Primary

exchanger outlet

AN1

EP

180°

DA

2

DA EF

TT

CS

EC VD

EP

VA

TT

DA TG

J

H

VD DN50 drainage

TG

DA

F

VA Isolating valve

PI Support feet

EC hot water outlet

EC

internal diameter of 400 mm

(DN25 connection)

DA Outlet/loop return

øD

TH Manhole with an

EP Plate exchanger

90°

270°

B

C

E

F

G

EF

EF A

315°

VD

AN1 TH

øD + 350

J TM-TT E F G A B C H øD øD+350 Capacity (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (G int. thread) (litres) 500 750 1 000

90 90 90

410 440 440

650 800 800

560 590 590

1 000 1 150 1 150

660 690 690

860 890 890

1 030 1 820 1 420 1 060 1 880 1 450 1 330 2 430 2 000

Without manhole

CS DA

EC

EC

DA

EF EP TG

1

PI PR

DA

EP

DN50 DN50 DN50

140 175 210

DN15 DN15 DN15

anode Secondary circulator Outlet/loop return Hot water outlet Cold water inlet Plate exchanger (DN25 connection) Support feet Threaded bearing with cover for attaching an immersion heater, if required

TG Sleeves 15/21 for VA VD 1 2

thermometers and thermostat Isolating valve DN50 drainage Primary exchanger inlet Primary exchanger outlet

3

AN1

2

180°

TG

CS

H

Weight (kg)

AN1 Threaded nozzle 40/49 for øD

EC VD

DA EF

VA

EP

AN1 DA

90°

270°

EF A

B

C

PR

E

J

F

EC-EF (G int. thread) DA-VM (G ext. thread)

DOMESTIC HOT WATER

PI

PI

VD

PR TG

øD + 350

A B C øD øD+350 Capacity(1) (mm) (mm) (mm) (mm) (mm) (litres) 500 750 1 000

90 90 90

410 440 440

860 890 890

650 800 800

1 000 1 150 1 150

E (mm) 925 955 955

F (mm)

H (mm)

1 420 1 820 1 450 1 880 2 000 2 430

J TG (mm) (G int.thread) 1 170 1 200 1 510

DN15 DN15 DN15

EC-EF (G int. thread) DA-VM (G ext. thread)

Weight (kg)

DN50 DN50 DN50

100 155 175

Note : other models available on request.

(1)

165


PLATE EXCHANGER Exchanger power (kW) 41(1) 49(1) 66 77(1) 87(1) 94 100(1) 106(1)

Primary 90°C Flow rate (m3/h) 1.26 1.26 2.02 2.12 2.41 2.59 2.52 2.48

Δ p (mWC*) 2,90 1.69 2.70 2.12 2.70 3.10 2.20 1.67

Second. 10/55°C Flow rate (m3/h) 0.79 0.94 1.26 1.48 1.66 1.80 1.91 2.02

Other models available on request. *mWC = Meter of water column.

Exchanger power (kW) 136(1) 143(1) 154 222(1) 252 266(1) 301(1) 332

Primary 90°C Flow rate (m3/h) 3.71 3.89 3.89 5.83 6.44 6.77 7.60 8.24

Δ p (mWC*) 2.88 3.16 2.61 3.09 2.96 3.26 3.06 3.06

Second. 10/55°C Flow rate (m3/h) 2.59 2.74 2.95 4.25 4.82 5.08 5.76 6.34

Other models available on request. *mWC = Meter of water column.

(1)

(1)

MODELS AVAILABLE Without manhole Capacity (litres)

Power (kW)

500 500 500 500 500 750 750 750 750 750 1 000H(2) 1 000H(2) 1 000H(2) 1 000H(2) 1 000H(2)

66 94 154 252 332 66 94 154 252 332 66 94 154 252 332

Standard model with a 60 mm-M1 jacket PRP05066M1 PRP05094M1 PRP05154M1 PRP05252M1 PRP05332M1 PRP07066M1 PRP07094M1 PRP07154M1 PRP07252M1 PRP07332M1 PRP10066M1 PRP10094M1 PRP10154M1 PRP10252M1 PRP10332M1

Cooling constant (Wh/day.K.L)

Standard model with a 60 mm-M1 jacket PRP05066M1V PRP05094M1V PRP05154M1V PRP05252M1V PRP05332M1V PRP07066M1V PRP07094M1V PRP07154M1V PRP07252M1V PRP07332M1V PRP10066M1V PRP10094M1V PRP10154M1V PRP10252M1V PRP10332M1V

Cooling constant (Wh/day.K.L)

0,098 0,098 0,098 0,098 0,098 0,080 0,080 0,080 0,080 0,080 0,075 0,075 0,075 0,075 0,075

Standard model with a 50 mm-M0 jacket PRP05066M0 PRP05094M0 PRP05154M0 PRP05252M0 PRP05332M0 PRP07066M0 PRP07094M0 PRP07154M0 PRP07252M0 PRP07332M0 PRP10066M0 PRP10094M0 PRP10154M0 PRP10252M0 PRP10332M0

Cooling constant (Wh/day.K.L)

Standard model with a 50 mm-M0 jacket PRP05066M0V PRP05094M0V PRP05154M0V PRP05252M0V PRP05332M0V PRP07066M0V PRP07094M0V PRP07154M0V PRP07252M0V PRP07332M0V PRP10066M0V PRP10094M0V PRP10154M0V PRP10252M0V PRP10332M0V

Cooling constant (Wh/day.K.L)

0,136 0,136 0,136 0,136 0,136 0,111 0,111 0,111 0,111 0,111 0,103 0,103 0,103 0,103 0,103

Note : H = Top version.

(2)

With manhole Capacity (litres)

Power (kW)

500 500 500 500 500 750 750 750 750 750 1 000H(2) 1 000H(2) 1 000H(2) 1 000H(2) 1 000H(2)

66 94 154 252 332 66 94 154 252 332 66 94 154 252 332

Note : H = Top version.

(2)

OPTIONs Reference KA1

166

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve

0,098 0,098 0,098 0,098 0,098 0,080 0,080 0,080 0,080 0,080 0,075 0,075 0,075 0,075 0,075

0,136 0,136 0,136 0,136 0,136 0,111 0,111 0,111 0,111 0,111 0,103 0,103 0,103 0,103 0,103


“DPX” DUPLEX STAINLESS STEEL range SPECIFICATION

DPX Optimised connections

DUPLEX stainless steel

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

Reinforced thermal insulation

Inspection manhole

• Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 500 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1) • T-max = 95°C constant. Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

DOMESTIC HOT WATER

Tank

3

Equipment • Removable plate exchanger made of AISI 316 stainless steel. • AISI 316 L stainless steel connection pipes. • Secondary stainless steel circulator. • Double safety thermostat 0/90°C. • Exchanger/circulator insulation valve.

Options • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • Other thicknesses of insulation.

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • Accessories = 1 year.

167


DIMENSIONS øD

EC

DA TM

TT 1 EP DA 2 TT

L

K

H

CS

CS Secondary circulator

J

TT VA

DA Outlet/loop return

E'

G

EC Hot water outlet EF Cold water inlet EP Plate exchanger

F

EF

(DN25 connection)

E

EF B

PI Support feet TH Manhole with an

internal diameter of 400 mm

TM Nozzle for

A

PI

VD

thermometer

TH

TT Nozzle for

thermostat (or PT100 probe

VA Isolating valve 270°

VD DN50 drainage

EC VD

1 Primary exchanger

inlet

2 Primary exchanger

outlet

DA EF EP

DA EF TM TT

180°

TH

TM-TT EC-EF-DA-VD Capacity(1) (G int. thread) (G ext. thread (litres) 500 DN15 DN50 750 DN15 DN50 1 000 DN15 DN50

90°

Weight (kg) 140 175 210

Note: other models available on request.

(1)

Capacity (litres) 500 750 1 000

168

A (mm) 90 90 90

B (mm) 410 440 440

øD (mm) 650 790 790

E (mm) 560 590 590

E’ (mm) 860 890 890

F (mm) 660 690 690

G (mm) 1 030 1 060 1 390

H (mm) 1 820 1 880 2 430

J (mm) 1 295 1 325 1 875

K (mm) 1 420 1 450 2 000

L (mm) 1 445 1 475 2 025


TECHNICAL SPECIFICATIONS OF THE PLATE EXCHANGER Primary 90°C

Exchanger power (kW)

Flow rate (m3/h) 1.26 1.26 2.02 2.12 2.41 2.59 2.52 2.48 3.71 3.89 3.89 5.83 6.44 6.77 7.60 8.24

41(2) 49(2) 66 77(2) 87(2) 94 100(2) 106(2) 136(2) 143(2) 154 222(2) 252 266(2) 301(2) 332

Δ p (mWC*) 2,90 1.69 2.70 2.12 2.70 3.10 2.20 1.67 2.88 3.16 2.61 3.09 2.96 3.26 3.06 3.06

Second. 10/55°C Flow rate (m3/h) 0.79 0.94 1.26 1.48 1.66 1.80 1.91 2.02 2.59 2.74 2.95 4.25 4.82 5.08 5.76 6.34

Other models available on request. * mWC = Meter of water column.

MODELS AVAILABLE Capacity (litres) 500 500 500 500 500 750 750 750 750 750 1 000 1 000 1 000 1 000 1 000

Power (kW) 66 94 154 252 332 66 94 154 252 332 66 94 154 252 332

Standard model with a M1 jacket DXP05066M11V DXP05094M11V DXP05154M11V DXP05252M11V DXP05332M11V DXP07066M11V DXP07094M11V DXP07154M11V DXP07252M11V DXP07332M11V DXP10066M11V DXP10094M11V DXP10154M11V DXP10252M11V DXP10332M11V

Cooling constant (Wh/day.K.L) 0,060 0,060 0,060 0,060 0,060 0,049 0,049 0,049 0,049 0,049 0,046 0,046 0,046 0,046 0,046

Standard model with a M0 jacket DXP05066M01V DXP05094M01V DXP05154M01V DXP05252M01V DXP05332M01V DXP07066M01V DXP07094M01V DXP07154M01V DXP07252M01V DXP07332M01V DXP10066M01V DXP10094M01V DXP10154M01V DXP10252M01V DXP10332M01V

Cooling constant (Wh/day.K.L) 0,072 0,072 0,072 0,072 0,072 0,058 0,058 0,058 0,058 0,058 0,054 0,054 0,054 0,054 0,054

DOMESTIC HOT WATER

(2)

3

OPTIONs Reference KA1

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve

169


DHW CYLINDER IMMERSION HEATERS AND ELECTRICAL CARTRIDGES 300 to  6,000 Litres The electric heater is most often used in domestic hot water (ECS) storage systems in residential properties or industrial premises. It makes it possible to amass a reserve of water from electric elements fixed directly onto the tank and operating at night during off-peak hours (in accordance with the energy supplier's tariff). The volume corresponding to the daily requirement is heated outside the hours of use and thus allows tapping without flow restrictions linked to the installed power. There are two types of electrical equipment available: • Immersion heaters: the heating elements are directly immersed into the water requiring heating. • Cartridges: the heating elements are inserted into stainless sleeves; the lack of contact with the water avoids corrosion or scaling on the heating elements and also enables disassembly without the need to drain the tank. The electric water heater is available in four different versions of tank to meet all needs: Type of coating Capacity T-max Duration of T-max

170

RC851 0,3 à 6 m3 85°C Constant

RC951 0,3 à 6 m3 95°C Peak

Nature of the stainless steel Capacity T-max Special resistance to chlorinated shocks

DUPLEX STAINLESS STEEL 0,3 à 3 m3 95°C en continu

316L STAINLESS STEEL 0,3 à 3 m3 95°C constant

+++

++


ADVANTAGES

DOMESTIC HOT WATER

• Multi-purpose: suitable for use with energy recovery systems (preheating). • Significant hot water storage capacity to meet peaks in demand. • Temperature stability for distributed DHW. • Can be used a constant temperature of up to 95°C (depending on the model). • Cost-effective solution (heating element directly integrated into the tank). • Quick and easy to install: equipment delivered to site with pre-assembled thermal equipment (can be easily removed if required). • Easy to maintain: cartridges can be removed without the need for draining. • Extended warranty for stainless steel version. • Non-standard versions available on request.

OPERATING PRINCIPLE

11

10 9

7 6

1

3

3

10 9

8

12

7 6

5

4

8 5

4

2 1

Cold water outlet

5

Heating element

2 Water meter with pulse output

6 Heating element thermostat

3 Cold water input temperature

7 Thermal shock thermostat

sensor

4

Solenoid valve (quick flush)

8 Water shortage pressure switch 9

10 Integrated loop heater 11 Domestic hot water outlet

temperature sensor

12 Homogenisation pump

Loop return

171


“PREFERENCE” range

Electric immersion heater(s) - 300 to 6,000 litres

SPECIFICATION

RC Optimised connections

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

Cylinder with "RC" coated carbon steel tank

Reinforced thermal insulation

Tank

Inspection manhole

Electric immersion heater with integrated power switch (P ≤ 20 kW)

• Vertical carbon steel tank with 3 feet. • 300 to 6,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. •Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1). (handhole with a diameter of 250 mm for 300 litres. Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating • Finished with “RC851” coating (Maximum temp = 85°C constant). • Magnesium protection anode(s) with wear indicator.

External protection • Anti-rust paint

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 fire rated: • High-performance mineral wool - 60 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 50 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Electric immersion heater(s) • Reinforced incoloy resistor(s). • DN40 threaded cap up to 12 kW, M77 beyond that. • Voltage - three-phase 230/400 V up to 24 kW, three-phase 400/700 V beyond that. - Immersion heater fixing: on the tank or the manhole as required

172

• Immersion heater fixing on the manhole . • Temperature regulation: - Electrical power ≤ 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cable switch). - Electrical power ≤ 20 kW: Double unipolar safety thermostat.

Options • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • “RC951” finish (T-max = 95°C peak). • Non-standard versions available on request.

Warranties

(in accordance with our general conditions of sale) • Tank = 5 years. • Accessories = 1 year.


DIMENSIONS øD

AN1 Threaded nozzle 40/49 for

anode

EC

AN2 Threaded nozzle 40/49 for

2nd anode (Volume ≥ 4m3)

TM

DA Outlet/loop return

DA

TT

EC hot water outlet

AN2

EL Electric heaters

EF Cold water inlet

PI Support feet

AN1

TH Manhole with an internal

EL

diameter of 400 mm (handhole with a diameter of 250 mm for 300 litres)

H

DA

TM Threaded nozzle 15/21 for

thermometer

TT Threaded nozzles 15/21

J

TT

for thermostat (or PT100 probe)

G2

EF

VM

180°

EC VM

EF DA

DA EF TT

90°

270°

315° 0°

AN1 AN2 EL TH TM

Capacity (litres) 300 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

A (mm) 90 90 90 90 90 90 90 90 90 90 90 110 110 110

B (mm) 395 410 440 440 475 475 510 510 560 560 560 630 630 630

C (mm) 545 560 590 590 650 650 685 685 745 745 745 855 855 855

øD (mm) 550 650 800 800 950 950 1 100 1 100 1 300 1 300 1 300 1 500 1 500 1 500

E (mm) 565 660 690 690 725 725 760 760 810 810 810 860 860 860

Capacity (litres)

TM – TT (G int. thread)

300 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15

EF (G int. thread) DA-VM (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50

5 000

DN15

DN50

6 000

DN15

DN50

G1 (mm) 850 1 030 1 060 1 330 1 100 1 100 1 160 1 400 1 220 1 280 1 450 1 530 1 880 2 160

G2 (mm) 1 780 2 130 2 410

F (mm) 685 860 890 890 925 925 960 960 1 010 1 010 1 010 1 060 1 060 1 060

EC

Weight (kg)

DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN50 threaded DN80 flat flange DN80 flat flange

95 140 175 210 235 280 290 345 400 430 470 680

H (mm) 1 535 1 820 1 880 2 430 1 960 2 510 2 020 2 570 2 110 2 350 2 660 2 790 3 490 3 990

DOMESTIC HOT WATER

A

PI

B

EF

E

C

F

G1

VM Threaded drainage outlet

3

790 890

J (mm) 1 155 1 420 1 450 2 000 1 485 2 035 1 520 2 070 1 570 1 820 2 120 2 185 2 805 3 305

Note : H = High version ; B = Low version

(1)

173


MODELS AVAILABLE Manhole ø 400 mm (except 300 L) – Elect.: Heating from 10 to 60°C in 6 hrs + Thermostat (tri-phased for power ≤ 20 kW, unless unipolar).. Capacity (litres)

Power (Number x kW)

Standard model with a 60 mm-M1 jacket Cooling Without With manhole constant (Wh/ manhole day.K.L)

Standard model with a 50 mm-M0 jacket Cooling Without With manhole constant (Wh/ manhole day.K.L)

300 500 750 1 000H(1) 1 000B(1) 1 500H(1) 1 500B(1) 2 000H(1) 2 000B(1) 2 500 3 000 4 000 5 000 6 000

3 (1 x 3) 6 (1 x 6) 9 (1 x 9) 12 (1 x 12) 12 (1 x 12) 15 (1 x 15) 15 (1 x 15) 20 (1 x 20) 20 (1 x 20) 24 (1 x 24) 30 (1 x 30) 40 (2 x 20) 48 (2 x 24) 60 (2 x 30)

PRE030M1B PRE050M1V PRE075M1V PRE100M1HV PRE100M1BV PRE150M1HV PRE150M1BV PRE200M1HV PRE200M1BV PRE250M1V PRE300M1V PRE400M1V PRE500M1V PRE600M1V

PRE030M0B PRE050M0V PRE075M0V PRE100M0HV PRE100M0BV PRE150M0HV PRE150M0BV PRE200M0HV PRE200M0BV PRE250M0V PRE300M0V PRE400M0V PRE500M0V PRE600M0V

PRE030M1 PRE050M1 PRE075M1 PRE100M1H PRE100M1B PRE150M1H PRE150M1B PRE200M1H PRE200M1B PRE250M1 PRE300M1 -

0,125 0,098 0,080 0,075 0,068 0,063 0,060 0,055 0,052 0,050 0,048 0,042 0,040 0,039

PRE030M0 PRE050M0 PRE075M0 PRE100M0H PRE100M0B PRE150M0H PRE150M0B PRE200M0H PRE200M0B PRE250M0 PRE300M0 -

Note : H = High version ; B = Low version

(1)

OPTIONs Reference KA1 CCT

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve Thermal shock box, anti-legionella box

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

Minimum Ø of tank (mm) 550 550 550 650 800

Note: Integrated loop heater is not pre-assembled onto the cylinder.

174

0,173 0,136 0,111 0,103 0,094 0,088 0,083 0,077 0,072 0,069 0,067 0,058 0,056 0,054


“DPX” DUPLEX STAINLESS STEEL range Electric immersion heater(s) - 300 to 3,000 litres

SPECIFICATION

DPX DUPLEX stainless steel

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

Reinforced thermal insulation

Inspection manhole

Tank • Vertical "DPX" DUPLEX stainless steel tank with 3 feet. • 300 to 3,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1) (handhole with a diameter of 250 mm for 300 litres). • T-max = 95°C constant. Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Removable thermal insulation

(including the inspection manhole and the bottom of the tank) M1 fire rated: • High-performance mineral wool - 100 mm thick (λ = 0.032 W/m/K). • Flexible PVC jacket M0 fire rated: • Rockwool - 100 mm thick (40 kg/m3). • Isoxal metal sheet jacket.

Electric immersion heater with integrated power switch (P ≤ 20 kW)

DOMESTIC HOT WATER

Optimised connections

3

Electric immersion heater(s) • Reinforced incoloy resistor(s). • DN40 threaded cap up to 12 kW, M77 beyond that. • Voltage - three-phase 230/400 V up to 24 kW, three-phase 400/700 V beyond that. - Immersion heater fixing: on the tank or the manhole as required • Immersion heater fixing on the manhole. • Temperature regulation: - Electrical power ≤ 20 kW: Three-phase control/safety box 30 A, 400 V, fitted to the top of the immersion heater (double safety thermostat + cable switch). - Electrical power ≤ 20 kW: Double unipolar safety thermostat.

Options • Tank made of AISI 316L stainless steel. • Accessories kit (thermometer, DN25 safety valve, DN50 drainage valve, Air vent valve). • Other thicknesses of insulation.

Warranties (in accordance with our general conditions of sale) • Tank = 7 years. • Accessories = 1 year.

175


DIMENSIONS øD

EC

TM

DA

TT TH DA

EL

H

TT

TT K

L

DA Outlet/loop return EC hot water outlet

J

EF

EF Cold water inlet G

EF E'

EL Electric heaters

F

PI Support feet

E

TH Manhole with an

B

internal diameter of 400 mm (handhole with a diameter of 250 mm for 300 litres)

TM Nozzle for

A

PI

VD

thermometer

TT Nozzle for

thermostat (or PT100 probe)

VD DN50 drainage

270°

EC VD

EF DA

DA EF TM TT

180°

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

TH 90°

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

176

A (mm) 90 90 90 90 90 90 90 90

B (mm) 395 410 440 440 510 560 560 560

øD (mm) 550 650 790 790 1 100 1 250 1 250 1 250

EL

E mm) 545 560 590 590 685 745 745 745

TM-TT (G int. thread)

E’ (mm) 685 860 890 890 960 1 010 1 010 1 010

F (mm) 565 660 690 690 760 810 810 810

DN15 DN15 DN15 DN15 DN15 DN15 DN15 DN15 G (mm) 855 1 030 1 060 1 390 1 130 1 180 1 510 1 640

H (mm) 1 535 1 820 1 880 2 430 2 020 2 110 2 660 2 880

EC-EFDA-VD (G ext. thread) DN50 DN50 DN50 DN50 DN50 DN50 DN50 DN50 J (mm) 1 030 1 295 1 325 1 875 1 390 1 425 1 975 2 195

Weight Weight with heater (kg) (kg) 95 140 175 210 290 400 430 470 K (mm) 1 155 1 420 1 450 2 000 1 520 1 570 2 120 2 340

110 165 205 240 330 450 480 520 L (mm) 1 180 1 445 1 475 2 025 1 545 1 595 2 145 2 365


MODELS AVAILABLE Manhole ø 400 mm (except 300 L) – Elect.: Heating from 10 to 60°C in 6 hrs + Thermostat (tri-phased for power ≤ 20 kW, unless unipolar). Power (Number x kW)

Capacity (litres) 300 500 750 1 000 1 500 2 000 2 500 3 000

3 (1 x 3) 6 (1 x 6) 9 (1 x 9) 12 (1 x 12) 15 (1 x 15) 20 (1 x 20) 24 (1 x 24) 30 (1 x 30)

Standard model with a 100 mm-M1 jacket DXE030M11B DXE050M11V DXE075M11V DXE100M11V DXE150M11V DXE200M11V DXE250M11V DXE300M11V

Cooling constant (Wh/day.K.L) 0.077 0.060 0.049 0.046 0.037 0.032 0.031 0.030

Standard model with a 100 mm-M0 jacket DXE030M01B DXE050M01V DXE075M01V DXE100M01V DXE150M01V DXE200M01V DXE250M01V DXE300M01V

Cooling constant (Wh/day.K.L) 0.091 0.072 0.058 0.054 0.044 0.038 0.036 0.035

Reference KA1 CCT

Description Accessories kit - DN25 safety valve calibrated at 7-bar - Brass thermometer with dial 0/120°C - DN50 drainage valve - Air vent valve Thermal shock box, anti-legionella box

Integrated loop heater (ILH kits for DHW cylinders) • Additional immersion heater located in the top section of the tank (230/400 V tri-phase) • Double unipolar safety thermostat. Reference RBI3 RBI4 RBI6 RBI9 RBI12

Immersion heater power (kW) 3 4,5 6 9 12

DOMESTIC HOT WATER

OPTIONs

3

Minimum Ø of tank (mm) 550 550 550 650 800

Note : Integrated loop heater is not pre-assembled onto the cylinder

177


“PREFERENCE” range Electric cartridge(s) - 500 to 6,000 litres SPECIFICATION

RC Optimised connections

CE compliance • 97/23/CE • 73/23/CE • 89/336/CE

Cylinder with "RC" coated carbon steel tank

Reinforced thermal insulation

Tank • Vertical carbon steel tank with 3 feet. • 500 to 6,000 litres capacity. • Maximum working pressure = 7 bar. • Test pressure = 10 bar. • Nozzles (in accordance with the following diagram). • ø 400 mm inspection manhole(1). Note: Compliant with the recommendations of the Directorate-General for Health.

(1)

Internal coating • Finished with “RC851” coating (maximum temp = 85°C constant)