How to draw 3d box using autocad box command

Learning Tutorials

Tutorial : How to draw 3d box using Box command In this tutorial you will learn, how to draw 3d box using Box command.

CADIN360.COM LEARNING TUTORIALS Let’s learn how to draw 3d box using Box command.

In AutoCAD Box command creates a 3D solid box. The base of the box is always drawn parallel to the XY plane of the current UCS (work plane). The height of the box is specified in the Z-axis direction. You can enter both positive and negative values for the height. Entering a positive value draws the height along the positive Z axis of the current UCS. Entering a negative value draws the height along the negative Z axis.

To learn how to draw 3d box using Box command, follow the below mentioned steps.

1. Now, click on the Box command in Modeling panel under Home tab.

You can also activate Box command by entering BOX at the command line.

Another method to select the Box command is also available. You can select the Box command from Menu Bar > Draw > Modeling > Box. You can also find Box command in Modeling toolbar of the AutoCAD classic workspace.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 2. Then, specify first corner.

3. Next, press F8 key to activate ORTHO on mode.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 4. Next, you can specify Length of box.

5. Next, type L and then press Enter for Length option.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 6. Next, type 9 and then press Enter.

7. Next, you can specify width of box.

8. Next, type 10 and then press Enter.

9. Next, you can specify height of box.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 10. Next, type 6 and then press Enter.

11. Observe that, box is created with specified length width and height.

12. Next, click on the box and then press delete key to delete the box.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 13. You can also create 3d cube using Box command.

14. Click on the Box command in Modeling panel under Home tab.

15. Next, specify first corner.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 16. Next, press F8 key to activate ORTHO on mode.

17. Next, type C for cube option of Box command.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 18. Next, press Enter to activate the cube option.

19. Next, specify length of cube.

20. Next, type 10 and then press Enter.

21. Next, right-click on the drawing area to display shortcut menu.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 22. Next, select Zoom option.

23. Next, press and hold the left mouse button; then drag the cursor downward to zoom out.

24. Next, press Esc or Enter key to exit.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 25. Observe that, cube is created using the Box command.

26. There are various methods to activate the Box command.

27. You can activate Box command from command line.

28. Type BOX in command line.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 29. Next, press Enter or Spacebar to activate the Box command.

30. Next, press ESC key to exit the Box command.

31. You can also activate the Box command from Solid tab in 3D Modeling workspace.

32. Next, click on the Solid tab.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 33. You can select Box command in Primitive panel under Solid tab.

34. You can also activate the Box command from Menu Bar. 35. Next, click on the Customize Quick Access toolbar button.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 36. Once you click on the Customize quick access toolbar button customize quick access toolbar list appears.

37. Next, select show menu bar option.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 38. Next, click on the Draw menu bar.

39. You can select the Box command from Draw menu bar.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 40. You can also activate the Box command from the Modeling toolbar.

41. Next, click on the Tools menu bar.

42. Next, click on the Modeling toolbar.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 43. Observe that, Modeling toolbar is appeared.

44. You can select the Box command from the Modeling toolbar.

45. Next, click on the close button of Modeling toolbar.

46. For more tutorials visit www.cadin360.com All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

Learning Tutorials