How to create chamfer using autocad chamfer command

Learning Tutorials

Tutorial : How to create chamfer using Chamfer command In this tutorial you will learn, how to create chamfer using Chamfer command.

CADIN360.COM LEARNING TUTORIALS Let’s learn how to create chamfer using Chamfer command.

In AutoCAD Chamfer command bevels the edges of objects. The distance and angles that you specify are applied in the order that you select the objects. A chamfer connects two objects to meet in a flattened or bevelled corner. A chamfer connects two objects with an angled line. It is usually used to represent a bevelled edge on a corner. Chamfer command can be used to bevel all corners of a polyline using a single command.

To learn how to create chamfer using Chamfer command, follow the below mentioned steps.

1. Now, click on the Arrow head button.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 2. Then, click on the Chamfer command in Modify panel under Home tab.

You can also activate Chamfer command by entering CHAMFER or CHA at the Command Line.

Another method to select the Chamfer command is also available. You can select the Chamfer command from Menu Bar > Modify > Chamfer.

You can also find Chamfer command in Modify toolbar of the AutoCAD classic workspace.

3. Chamfer command have various options such as UNDO, POLYLINE, DISTANCE, ANGLE, TRIM, METHOD, AND MULTIPLE to create chamfer. In this tutorial we will use Distance option of chamfer command to create chamfer.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 4. Next, type D for Distance option of chamfer command.

5. Next, press Enter or spacebar or Right-click to activate distance option.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 6. Next, specify the first chamfer distance.

7. Next, type 8 as first chamfer distance value.

8. Next, press Enter to accept the input value.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 9. Next, specify second chamfer distance.

10. Next, type 3 as second chamfer distance value.

11. Next, press Enter to accept the input value.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 12. Next, select first line.

13. Next, select second line to create chamfer.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 14. Observe that, chamfer is created with specified chamfer distance between selected lines.

15. There are various methods to activate the Chamfer command.

16. You can activate Chamfer command from command line.

17. Type CHA or CHAMFER in command line.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 18. Next, press Enter to activate Chamfer command. You can also use spacebar in place of Enter to perform the operation.

19. Next, press Esc key to exit the Chamfer command.

20. You can also activate Chamfer command from Menu Bar. 21. Next, click on the Modify menu bar.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 22. You can select the Chamfer command from Modify menu bar.

23. You can also activate the Chamfer command from the Modify toolbar.

24. Next, click on the Tools menu bar.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 25. Next, click on the Modify toolbar.

26. Observe that, Modify toolbar is appeared.

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

CADIN360.COM LEARNING TUTORIALS 27. You can select the Chamfer command from the Modify toolbar.

28. Click on the close button of Modify toolbar.

29. For more tutorials visit www.cadin360.com

All the information pictures logos are property of their respective owners & our presented for information & learning purpose only.

Learning Tutorials