Abby Jackson - final portfolio fall 2016

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Table of Contents ………………………………………………………………………………

O-Tools …………………………………………………………………………………………

T- Trusses ………………………………………………………………………………………

Q- Quantity Take-Off

ABBY Q.1

JACKSON

O.1 T.1-T.9

F.1 ……………………………………………………………………………………….

P-Wall Panels ………………………………………………………………………………….. P.1-P.2 W- Window ………………………………………………………………………………………. W.1 S- Skylight ………………………………………………………………………………………..

S.1 R- Roof ………………………………………………………………………………………... R.1-R.2 D- Door ……………………………………………………………………………………..

D.1-D.2 C- Changing Room ……………………………………………………………………………. C.1-C.2 A– Mass Assemblies ……………………………………………………………………………. M.1-M.4 E– Master Planning …………………………………………………………………………….

E..1-E.3 M- Models …………………………………………………………………………………… M.1-M.5 N– Plans & Elevations ……………………………………………………………………………. N.1-N.5 B– Build Project …………………………………………………………………………………

B.1-B.3 F-Flooring

ARC 2526 Professor Herrmann Second Year Fall 2016

Quantity Take-Off

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Q.1

Tools 

Cordless Drills/Drill Batteries



Speed Squares



Tape Measures

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year



Pencil



Circular Saws/Miter Saw



Hammers

Fall 2016

O.1

ABBY JACKSON

Assignment 7.0

Truss Assembly

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Truss Assembly

ABBY

Outer Triangle Materials:



JACKSON

Tools: Circular Saw Tape Measure Pencil

2x4 P. T. Pine– 12’ (1)

Steps: 1.

Take 12’ 2x4 and cut down to 11’ 3/4”.

Waste

Assignment 7.0 2.

On one end of the 2x4, mark 7 1/2” and cut from corner to mark.

Assembly Sequencing Diagrams

65°

Waste

Professor Herrmann 3.

On the opposite side of the 2x4, cut 45° from bottom corner.

ARC 2526 45°

Waste

4.

Finished board should look as shown.

T.1

Truss Assembly Outer Triangle Materials:



2x6 P.T. Pine– 10’ (1)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

Steps: 1.

Take 10’ 2x6 and cut down to 8’ 4 9/16”.

Assignment 7.0 Assembly Sequencing Diagrams 2.

On both ends of the 2x6 mark 2 1/8” and cut from corner to mark creating a parallelogram shape.

Professor Herrmann ARC 2526

3.

Finished board should look as shown.

T.2

Truss Assembly Outer Triangle Materials:



2x4 P.T. Pine– 6’ (1)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

Steps: 1.

Take 6’ 2x4 and cut down to 5’ 8 1/8”.

Assignment 7.0

2.

On one end of the 2x4. mark 4 5/16” on the bottom side and cut to corner.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

On opposite end of 2x4, mark 3 3/4” on bottom side and cut to corner.

4.

Finished board should look as shown.

T.3

Truss Assembly Web Members Materials:



2x4 P.T. Pine– 8’ (1)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

Steps: 1.

Take 8’ 2x4 and cut in half to make two 4’ long pieces.

Assignment 7.0

2.

Take one 4’ board and rip down middle.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

Cut 4’ board down to 3’ 1 7/8”.

4.

Cut corners off of one end from mark.

T.4

Truss Assembly Web Members Materials:



2x2 P.T. Pine– 4’ (1) (from previous 8’ 2x4)

ABBY JACKSON

Tools: Circular Saw Tape Measure Pencil

Steps: 1.

Take 2x2 from previous cut down 2x4 and cut down to 2’ 1 3/16”.

Assignment 7.0

2.

Cut off both corners of one end at 45°.

45°

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

T.5

Truss Assembly Web Members Materials:



2x2 P.T. Pine– 4’ (from previous 8’ 2x4)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

Steps: 1.

Take 2x2 from previous cut down 2x4 and cut down to 3’ 7 9/16”.

Assignment 7.0

2.

Cut ends accordingly.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

T.6

Truss Assembly Web Members Materials:



2x2 P.T. Pine– 4’ (from previous 8’ 2x4)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

Steps: 1.

Take 2x2 from previous cut down 2x4 and cut down to 2’ 2 2/8”.

Assignment 7.0

2.

Cut ends accordingly.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

T.7

Truss Assembly Web Members Materials:



2x4 P.T. Pine– 8’ (1)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

Steps: 1.

Mark corners.

Assignment 7.0

2.

Cut ends as diagrammed.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

T.8

Truss Assembly Materials:

  

2x2 P. T. Pine– 12’ (10) 2x4 P. T. Pine– 12’ (10) 2x6 P. T. Pine– 16’ (15)

Tools: Circular Saw Tape Measure Pencil Screws Drill

ABBY JACKSON

Steps: 1.

The top of the truss is made of 2x4’s. The column is a 2x6 and the web members are 2x2’s.

Assignment 7.0

2.

You will need 2 of these flat trusses.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

To create the 4 3D trusses, construct two of these trusses.

4.

Then attach together with screws at 90° angle with 2x2.

T.9

ABBY JACKSON

Assignment 7.0

Flooring Install

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Flooring Install Materials:



Plastic vapor barrier (3’ wide roll)

  

Tools: Hammer 16D nails

ABBY JACKSON

3/4” 4’x8’ plywood sheets- (6) 2x2 stained P.T. Pine– 12’ (11) 2x12 stained P.T. Pine– 12’ (20)

Steps: 1.

Take the plastic vapor barrier and roll out the cover concrete slab.

Assignment 7.0

2.

Take sheets of plywood and layer on top.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

Place 2x2’s 2’ apart and nail down.

4.

Insert 2x12 boards in sets of twos in between the 2x2’s and nail down.

F.1

ABBY JACKSON

Assignment 7.0

Wall Panel Assembly

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Wall Assembly

Materials:

      

2x12 stained P. T. Pine– 10’ (6) 2x10 stained P. T. Pine –10’ (6) 2x8 stained P. T. Pine– 10’ (8) 2x6 stained P. T. Pine– 10’ (8) 2x4 stained P. T. Pine-10’ (10) 2x2 stained P. T. Pine– 10’ (10)

Tools: Circular Saw Tape Measure Pencil Hammer 16d nails

ABBY JACKSON

Rigid insulation 1’x12’ (16)

Steps: 1.

Construct stud wall.

Assignment 7.0 Assembly Sequencing Diagrams 2.

Insert Rigid insulation.

Professor Herrmann ARC 2526

3.

Stack and nail wood panels on both sides of stud wall.

4.

Repeat to create 9 total walls at this dimension.

P.1

Wall Assembly

Materials:

       

Rigid insulation—12’ (3) 2x12 stained P. T. Pine– 10’ (6) 2x10 stained P. T. Pine –10’ (6) 2x8 stained P. T. Pine– 10’ (8) 2x6 stained P. T. Pine– 10’ (8)

Tools: Circular Saw Tape Measure Pencil

ABBY JACKSON

2x4 stained P. T. Pine-10’ (10) 2x2 stained P. T. Pine– 10’ (10) Rigid insulation 1’x12’ (16)

Steps: 1.

Repeat previous page instructions for each wall dimension. *Create 2 of each of these walls for north and south sides of cabin.

Assignment 7.0 Assembly Sequencing Diagrams Professor Herrmann ARC 2526

P.2

ABBY JACKSON

Assignment 7.0

Window Install

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Window Install Materials:

 

2x12 Stained P. T. Pine– 12’ (1) 2x4 Stained P. T. Pine– 8’- (2)

Tools: Drill Bits Screws Circular Saw Tape Measure

ABBY JACKSON

Steps: 1.

Take 10’ 2x12 and cut (2) 3’ 6 15/16” boards for the window sill.

Assignment 7.0 Assembly Sequencing Diagrams 2.

3.

Stack wood board 2x4, 2x4, 2x2, 2x2, 2x2, and screw to trusses on either side.

Professor Herrmann ARC 2526

Cut custom glass panels.

W.1

ABBY JACKSON

Assignment 7.0

Skylight Install

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Skylight Install Materials:

 

2x6 P. T. Pine– 12’ (3) 4’ x 3’ glass panels (3)

Tools: Drill Bits Screws Circular Saw Tape Measure

ABBY JACKSON

Steps: 1.

Cut boards to length.

Assignment 7.0 Assembly Sequencing Diagrams 2.

Notch boards 1” from bottom and 1” inside for the glass panels to sit on. Screw together frame.

Professor Herrmann ARC 2526

3.

Install glass.

S.1

ABBY JACKSON

Assignment 7.0

Roof Assembly

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Roof Assembly Materials:  4’x8’ 3/4” plywood sheets- (20)  2x4 wood lathes– 10’ (18)  Rigid foil-backed foam

Tools: Hammer 16D Nails

ABBY JACKSON

insulation– 20’-(9)

Steps: 1.

Lay out sheets of plywood for each side of roof.

Assignment 7.0

2.

Spread the wood lathes out along the bottom plywood layer and nail.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

Place the insulation in between the wood lathes.

4.

Place another 3/4” sheet layer on top just as step 1 and nail.

R.1

Roof Assembly Materials:

 

2x4 wood lathes– 10’ (18) 29 gauge R-panel metal roof–

ABBY JACKSON

Tools: Hammer 16D nails

20’x5’ 8 1/8”- (1)



29 gauge R-panel metal roof– 20’x8’- (1)

 

Roof felt (3’ wide roll) 20’ ridge cap

Steps: 1.

Start at bottom of each roof side and roll out 3’ wide roofing felt and overlap each layer 6” and nail.

Bottom

Assignment 7.0

Bottom

2.

Take the remaining wood lathes and lay out just as step 2 on the previous page and nail.

3.

Lastly, take the 29 gauge R-panel and place on top and nail to layers beneath.

4.

Attach ridge cap.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

R.2

ABBY JACKSON

Assignment 7.0

Door Assembly

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Door Assembly Materials:

     

12’ stained P. T. Pine (1) 10’ stained P. T. Pine (1) 8’ stained P. T. Pine (1) 6’ stained P. T. Pine (1) 4’ stained P. T. Pine (1)

Tools: Hammer 16D nails Circular Saw Tape Measure Speed Square Pencil

ABBY JACKSON

4’x8’ plywood sheet (1)

Steps: 1.

Start building the door jam by cutting pieces of plywood to the dimensions of the jam.

Assignment 7.0

2.

Cut wood block 4 1/2” x (each dimension) nail down to plywood and repeat for both sides of jam.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

Start constructing the door by cutting a piece of plywood 3’ x 6’8”.

4.

Cut wood boards 3’ long x (each dimension) and nail to plywood.

Repeat for both sides of door.

D.1

Door Assembly Materials:



2x2 P. T. Pine– 10’

Tools: Hammer 16D nails Drill Drill Bit Screws

ABBY JACKSON

Steps: 1.

First cut the three 1 1/4”x1 1/4” x 2 1/2” pieces that attach to the door.

Assignment 7.0

2.

Cut the two long pieces at 3’ each; then cut off angles as shown.

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

3.

To attach door to jam, set door square inside jam and drill down hinges 2’ 5 15/16” with the middle hinge centered to door.

D.2

ABBY JACKSON

Assignment 7.0

Changing Room Assembly

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Changing Room Assembly Materials:

     

2x12 stained P. T. Pine– 3’ (6) 2x10 stained P. T. Pine –3’ (6) 2x8 stained P. T. Pine– 3’ (8) 2x6 stained P. T. Pine– 3’ (8)

Tools: Hammer 16D nails Drill Drill Bit Screws

ABBY JACKSON

2x4 stained P. T. Pine-3’ (10) 2x2 stained P. T. Pine– 3’ (10)

Steps: 1.

Construct stud wall.

Assignment 7.0 Assembly Sequencing Diagrams 2.

Stack and nail wood panels on both sides of stud wall.

Professor Herrmann ARC 2526

3.

Repeat to make 2 walls and then stack wood panels connecting the two.

C.1

Changing Room Assembly Materials:



2x2 P. T. Pine– 3’ (1)

Tools: Hammer 16D nails Drill Drill Bit Screws Speed Square

ABBY JACKSON

Steps: 1.

Use speed square to cut angles of door knob.

Assignment 7.0 Assembly Sequencing Diagrams

2.

Attach with screws.

Professor Herrmann ARC 2526

C.2

ABBY JACKSON

Assignment 7.0

Mass Assemblies

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Super-Structure

ABBY JACKSON

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann Top View

ARC 2526

Axonometric

Second Year November 28, 2016

Super-Structure Truss Types

3D Truss Front Elevation

3D Truss Side View

Middle Truss Front Elevation

A.1 Inner Truss Front Elevation

Roof Assembly

ABBY JACKSON

Corrugated Metal with Ridge Cap

Wood Lathes

Roofing Felt

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann ARC 2526 Second Year

Plywood

November 28, 2016

Rigid Insulation

Wood Lathes

Roof Layers Plywood

A.1

Special Assembly

ABBY JACKSON

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann ARC 2526 Second Year November 28, 2016 Axonometric View of 3D Truss Plan

3D Truss Construction

Custom 1/4� Steel Gusset Plates

A.2

Wall Panel Assembly

ABBY JACKSON

This zone is not studded and will be custom for door and window.

*2- 2x12’s 2– 2x10’s 5– 2x8’s 4– 2x6’s 4– 2x4’s 5– 2x2’s

l

l

2x4 stud walls in between each truss with studs 1’ apart

Interior sides are boarded with stained P. T. Pine starting with 2x12 up to 2x2.*

Steps of Wall

Panel Assembly

l

l

Rigid insulation is cut to fit between studs.

Exterior sides are boarded in the same fashion as the interior sides.*

A.3

Corner Assembly

ABBY JACKSON P. T. Pine column finishes off exterior

3D truss extending from corner

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann Corner Plan View Without Roof

ARC 2526 Second Year

Boarded stud walls meet with east/west walls over lap the end of the north/south walls

November 28, 2016 Corner Explanation in Plan and Elevation

Exterior Elevation of Corner Interior Corner Without Diagonal Beam

A.4

ABBY JACKSON

Master Planning

ARC 2526 Professor Herrmann

Second Year Fall 2016

Cluster Exploration Project

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Exploring the technique of cluster planning through photos and diagrams

E.1

Master Plan Proposals

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Proposals for master plan using cluters

E.2

Master Plan

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Master plan for Hood Scout Reservation

E.3

ABBY JACKSON

Models

ARC 2526 Professor Herrmann

Second Year Fall 2016

Process Models

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Initial structure models Experimenting with different truss types

M.1

Process Models

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Experimenting with skinning and bed layout

M.2

Final Model

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Final model elevations on site

M.3

Computer Model

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Interior and Exterior views using Sketchup computer drawing program

M.4

Rendering

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

M.5

ABBY JACKSON

Assignment 7.0

Plan & Elevation Drawings

Assembly Sequencing Diagrams Professor Herrmann ARC 2526

Plan

ABBY JACKSON

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann ARC 2526 Second Year November 28, 2016

Scale: 1/2” = 1’-0” Plan

N.1

Elevations

ABBY JACKSON

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann West

ARC 2526 Second Year November 28, 2016

c East

N.2

Elevations

ABBY JACKSON

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann ARC 2526 Second Year November 28, 2016

North

South

N.3

Sections

ABBY JACKSON

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann ARC 2526 Second Year November 28, 2016

Transverse

Longitudinal

Building Sections

N.4

Site

ABBY JACKSON

N

Assignment 7.0 Assembly Sequencing Diagrams

Professor Herrmann ARC 2526 Plan

Second Year November 21, 2016

Site Plan Site Section

Section

N.5

ABBY JACKSON

Build Project

ARC 2526 Professor Herrmann

Second Year Fall 2016

Build Project

ABBY JACKSON

Sleeping Shelter Cabin for Hood Scout Reservation in Hazlehurst, MS

ARC 2526 Professor Herrmann Second Year Fall 2016

Architecture & Building Construction Science

Bridge for access to sleeping shelter when it is placed on site

Collaborative Studio Fall 2016 Build Project Both sleeping shelter and bridge were constructed at Mississippi State University by students.

B.1

Build Project Initial Super-Structure Model

ABBY JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Architecture & Building Construction Science Collaborative Studio Fall 2016 Build Project

B.2

Build Project

ABBY

My Hands-On Projects

JACKSON

ARC 2526 Professor Herrmann Second Year Fall 2016

Cut out custom metal gusset plates with plasma cutter. Then, drilled holes for bolts with drill press.

Team of 4 created custom wood and polygal door and window for entrance.

Cut and drilled together pieces for window frames for operable windows.

Architecture & Building Construction Science Collaborative Studio Fall 2016 Build Project

B.3