Busi 650 week 6 quiz 3

BUSI 650 Week 6 Quiz 3

Click Link Below To Purchase

http://www.foxtutor.com/product/busi-650-week-6quiz-3

A diagram where the physical flows of the parts are mapped onto the shop floor is referred to as muda The objective of feeding buffers is to ensure that non-critical chains are completed so that they do not delay tasks on the critical chain Project charters should contain some level of information regarding which of the following elements: Which of the following is NOT a direct benefit of lean An event is a series of connected activities from the start to the finish of the project When workers receive approval for a task based on inflated time estimate, they may perceive that they now have plenty of time to complete the task and therefore delay starting the task. What has this concept been called The project life cycle typically has a stretched-s or an exponential form Which of the following terms provides the basis for the project schedule, often formatted as a project Gantt chart?

Which of the following statement(s) concerning probabilities of completion is/are incorrect The optimistic time is the amount of time the project will take under the worstcase scenario The amount of flexibility the project manager has in terms of starting and completing an activity is referred to as its The step in the 5s approach in which unnecessary steps are eliminated is called Which of the following is NOT one of the seven categories of waste or muda A patient diagnosis is an example of what type of activity?

All of the following are important outputs of project scheduling, EXCEPT Favorable variances do not require corrective action or further investigation; only unfavorable variances in performance Key aspects of the theory of constraints include identifying the bottlenecks in the process and balancing the work flows in the system Takt time is calculated as Which of the following is/are (a) primary tenet(s) in the Japanese work systems Duration of critical path – path duration = __________?

According to Goldratt, to complete a project on time, the highest priority should be given to the In traditional approaches to production, preventive maintenance is also common.

Which of the following project categories typically seeks the development of a new generation of outputs?

The goal of single minute exchange of die is to reduce setup times to less than 10 minutes.

Pursuing perfection in lean organizations involves which of the following tools?