How to get more mileage from your CedarPrci Sidifu .

edarPro@ is the number one Knotty Cedar siding because CedarPro performs. Vith consistent qudity from unit to unit. Outstanding decay resistance and dimensional stability Superior acceptance of stain and paint. And a natural beauty that can last a lifetime when it's treated correctly Here's how to build yourself a classic.

Do what comes naturally.

CedarPro Siding is precision manufactured from natural Incense Cedar, and needs to "breathe." Even though it has been properly kiln-dried for its intended application, CedarPro Siding will still gain and lose a bit of moisrure as it adapts to job-site conditions. For top performance, pre-condition your CedarPro Siding, Stack it evenly, with air space between layers. And allow it to rest on-site in a coveredareafor seven to ten days before you install it.

Once your CedarPro Siding has settled-in, minimize future changes by pre-sealing sides, edges, and ends of each length prior to installation. If you'll be painting the finished installation, use a moisture-resistant sealer.

Allow some room to move.

Changes in humidity will cause all wood products, including CedarPro Siding, to expand and contract. If courses are butted together or improperly nailed, these natural changes can cause cracking or loosening of individual lengths. So be on the safe side. Make sure the subsurface is properly spaced, allow the proper expansion clearance between courses, and don't over-nail

CedarPro Siding.

Finish clean and fast. CedarPro Incense Cedar Siding readily acceprs paint and stain. For a classic job, stain or paint CedarPro Siding before it is installed.

Carefully touch-up butt ioints and other exposed ends with sealer and stain. Use a brush to work the finish into tight spaces. Seal-out moisture by caulking the joints around windows and doors with an acrylic or butyl compound.

If your plans call for paintingafter installation, do it as soon as possible to preclude weathering of the wood. If there's a lengthy delay between installation and finishing, be sure to clean your CedarPro Siding using a high-pressure warerwasher, and allow it to dry completely before applying the finish. Always be certain to read and follow the manufacturer's directions for applying primer and paint. For a frst-place finish, apply a coat of high-quality oil-based, stain-blocking primer to seal-in the siding's natural extracts. Then, as soon as the primer has dried, finish with a high-qudity acrylic latex exterior house paint. A brush application will produce better results than a spray or roller application. For proper adhesion, ^pply the top coat within rwo weeks of the first finish coat.

Get into high gear.

Our "Guide to Installation and Finishing" will give you the inside track on getting top performance from CedarPro Siding. For your copy, or to test-drive the complete

CedarPro Incense Cedar Siding

P&M Cedar Products, Inc.

P.O.Box7349

Stockton, Cahfomh 952O7 2091957-6360 fine. contact vour CedarPro retailer or distributor. Or call our sales office at 2091957 -6360.