BPRW Restroom Standards Manual

Public Restroom Design Standards Manual February 28, 2015 Created By:

Public Restroom Design Standards Manual Design Team City of Burlington, Vermont Department of Parks, Recreation & Waterfront Jon Adams-Kollitz Jen Francis Erin Moreau Todd Greenough

Gardner Kilcoyne Architects Liza Kilcoyne David Weissberger Sherilyn Lafley

gk architects

Index Introduction .................................................................................................................P.1 Standards Manual .......................................................................................................P.3 Mounting Heights Required for ADA ................................................................P.5 Paint & Flooring ...............................................................................................P.7 Doors, Windows, & Signage ............................................................................P.9 Lighting ............................................................................................................P.11 Toilet Partitions ................................................................................................P.13 Fixtures Toilet .....................................................................................................P.15 Urinal ....................................................................................................P.17 Sink & Faucet .......................................................................................P.19 Water Fountains ...................................................................................P.21 Accessories Baby Changing Table, Hand Dryer, Soap Dispenser ...........................P.23 Toilet Paper Dispenser, Mirror, & Trash Receptacles ...........................P.25 Showers ..........................................................................................................P.27 Appendix 1 - Cut Sheets ............................................................................................P.29 Appendix 2 - Case Study - Oakledge Park .............................................................. ..P.95 Proposed Exterior Color Scheme ....................................................................P.97 Proposed Plan and Elevations ........................................................................P.99 Color Board .....................................................................................................P.101

gk architects

Index

Introduction: This manual was developed to assist The City of Burlington’s Department of Parks, Recreation & Waterfront with renovating their existing seasonal restrooms that are located throughout the city of Burlington, Vermont. It’s goal is to establish a unique identity for the entire City of Burlington’s Park system, where individual park components relate to each other. This manual contains specific types of materials, fixtures, accessories and their installation practices that will be used in future renovation projects.

The preparation of this document meets the follow three objectives: The development and utilization of a single standards document by Burlington’s Parks, Recreation & Waterfront department.

To establish a pattern of common elements and identifiable quality throughout all the city’s parks restrooms.

The utilization of consistent, safe, and cost effective elements that are easily maintained and managed that is implemented system-wide.

Key Components: The Public Restroom Design Standards Manual identifies standard elements, materials, product information, specifications (as needed), and implementation practices. The main components of the manual are listed below. Each section includes text, images, and details to communicate the city’s standards. However, the details provided throughout the manual are not to be used for construction, but for general guidance to common practices and design elements.

gk architects 1

Public Restroom Design Standards Manual

gk architects 3

Required ADA Mounting Heights for Fixtures and Accessories

gk architects

ADA Fixture Mounting Heights 5

Paint:

Ben Moore Regal Select Exterior Paint

Selection Criteria: • Durable • Superior Adhesion for Difficult Surfaces • Easy Application • Mildew and Fade Resistant • Easy to Clean • Colors to coordinate with BPRW Logo • • • •

Exterior Paint Colors

Walls - Ben Moore PM-32 Briarwood

Gable - Ben Moore 1557 Silver Song

Trim - Ben Moore 602 Gondola Ride

Trim - Ben Moore HC-70 Van Buren Brown

Accent - Ben Moore 147 Fruity Cocktail

Accent - Ben Moore 768 Atlantis Blue

Interior Paint Colors

Walls - Ben Moore 2143-70 Simply White

Accent - Ben Moore 420 Apple Lime Cocktail

Flooring:

Custom Polyaspartic Flooring

gk architects

Selction Criteria: • Durable • Longevity • Chemical Resistance • UV Stability • Easy to Clean and Maintain • Adhesion to Difficult Surfaces with Ease • •

Paint & Flooring 7

Doors: Selection Criteria: • Durable • Secure • Heavy Duty • Voids between stiffeners are filled with polystyrene • Powder Coat • •

De La Fontaine - ST Series Steel Stiffened Core Painted

Trim - Ben Moore 602 Gondola Ride

Trim - Ben Moore HC-70 Van Buren Brown

Windows:

Signage:

Selection Criteria: • Repair and paint windows as needed • • •

Selection Criteria: • Use existing signage if applicable • ADA Requirements • •

Trim - Ben Moore 602 Gondola Ride

Men’s Room ADA Signage - TBD

Women’s Room ADA Signage - TBD

Men’s Room ADA Signage - TBD

Women’s Room ADA Signage - TBD

gk architects

Trim - Ben Moore HC-70 Van Buren Brown

ADA Compliant Door Handle with Back Plate -TBD

Doors, Windows & Signage 9

Lighting: Selection Criteria: • Brings daylight into spaces • LED lighting • Occupancy Sensor • Energy Efficient • Ease to retrofit in existing spaces • • •

Solatube

Solatube Occupancy Sensor

gk architects

Lighting 11

HDPE Toilet Partitions: Selection Criteria: • Durability • Easy to Clean • Impermeable to Moisture • Hides Scratches Well • Low Maintance • Pre Consumer Recycled Content • 100% Recyclable • •

Scranton Hiny Hider Partitions - Floor Mounted with Overhead Bracing

Scranton Hiny Hider Partitions - Shale in Orange Peal

Phenolic Toilet Partitions: Selection Criteria: • Durability • Easy to Clean • Impermeable to Moisture • Low Maintance • Strong • • •

Global Phenolic Partitions - Floor Mounted with Overhead Bracing

gk architects

Scranton Hiny Hider Partitions - Shale in Orange Peal

Toilet Partitions 13

Toilets:

American Standard 1.6 GSF Wall Mounted Toilet Model # 2859.016

American Standard 1.6 GSF Battery Flush Valve Model # 6065.161.002

Sloan Dual-Flush Side Mount EBV-550-A

gk architects

Selection Criteria: • Off the Floor for easy cleaning • • • • • •

Selection Criteria: • For non troubled areas • • • • • •

American Standard 1.6 GSF Floor Mounted Toilet Model # 2854.016

Sloan Royal Flushometer 110/111

Selection Criteria: • For places where the plumbing is not changed.

• • • • •

Selection Criteria: • For troubled areas that have problems flushing • • • • •

Selection Criteria: • Placed on the Side of the Sloan Royal Flushometer 110/111 for dual flushing • • • •

Fixtures 15

Urinals: Selection Criteria: • Easy to Clean • Requires no water • • • • • Waterless Urinal - Sonora Model # 2004

American Standard Washbrook FloWise Universal Urinal - Model # 6590

gk architects

American Standard Washbrook Flowwise 0.125 GPF Ultra High Efficiency Urinal - Model # 6590.503

Selection Criteria: • For non troubled areas • • • • • •

Selection Criteria: • For places troubled plumbing areas • • • • • •

Selection Criteria: • Battery Operated • • • •

American Standard Selectronic Flowwise Urinal Flush Valve - Battery Operated Model # 6063.013.002

Fixtures 17

Sinks: Selection Criteria: • Easy to Clean • • • • • • Kohler - Chesapeake Wall Mounted Sink - Model # K-1721

Faucet: Selection Criteria: • Easy to Clean • Tall enough to fill water bottles • • • • • American Standard Selectronic Integrated Electronic Proximity Laatory Faucet - Model # 7055.105

gk architects

Fixtures 19

Water Fountains: Selection Criteria: • Circular Shape • Address ADA • • • • Halsey Taylor - Enura II Tublular Wall Mounted Water Fountain Model # 4405 - Color: TBD

gk architects

Fixtures 21

Baby Changing Table: Selection Criteria: • Durable • Easy Cleaning • Shape • • • • Koala Kare Baby Changing Table - Model # KB200 - Cream Color

Selection Criteria: • Durable • Easy Cleaning • Shape • • • • Koala Kare Baby Changing Table - Model # KB208 - Cream Color

Hand Dryers:

Extreme Air GXT Hand Dryer White Enamel

Selection Criteria: • Energy Efficient • Adjustable Air Velocity • Powerful to dry hands quickly • Heavy Duty • Compact • Vandal Resistant • • •

Soap Dispensor:

American Dryer ADA Wall Guard - Model # ADA-WG

Toilet Paper Dispensor: Selection Criteria: • • • • • •

Provided by Burlington Parks & Rec

gk architects

Selection Criteria: • Easy to Clean • Protects Wall from water splatter • • • • •

Selection Criteria: • • • • • • Toilet Paper Dispensor Provided

by Burlington Parks & Rec

Accessories 23

Mirrors:

Acrylic Mirror with Stainless Steel Frame- TBD

Selection Criteria: • Shatter Resistant • • • • • • •

Selection Criteria: • • • • • • • Glass Mirror with Stainless Steel Frame- TBD

Trash Receptacles: Selection Criteria: • Easy to Clean • Off of the Floor • • • • • Rubbermaid Wall Hung Trash Can - Model # FG200GLWH

gk architects

Selection Criteria: • Easy to Clean • • • • • • Rubbermaid Floor Trash Can Model # 690FG816088B

Accessories 25

Showers: Selection Criteria: • • • • • • TBD

gk architects

Showers 27

Appendix 1 Cutsheets

gk architects 29

Material Safety Data Sheet Revision Date: 04-Nov-2011

Revision Number: 3

1. PRODUCT AND COMPANY IDENTIFICATION Product Name Product Code Product Class Color

MOORGARD 100% ACRYLIC LOW LUSTRE HOUSE PAINT N103

Manufacturer Benjamin Moore & Co. 101 Paragon Drive Montvale, NJ 07645 Phone: 201-573-9600 www.benjaminmoore.com

Emergency Telephone Number(s) CHEMTREC: 800-424-9300

WATER THINNED PAINT All

2. COMPOSITION INFORMATION ON COMPONENTS

Hazardous Components Chemical Name Titanium dioxide Silica, crystalline Nepheline syenite Kaolin Zinc oxide Diatomaceous earth Silica, mica Silica, amorphous Carbon black

CAS-No 13463-67-7 14808-60-7 37244-96-5 1332-58-7 1314-13-2 61790-53-2 12001-26-2 7631-86-9 1333-86-4

Weight % (max) 25 25 15 5 5 5 5 5 1

3. HAZARDS IDENTIFICATION Emergency Overview Vapors may be irritating to eyes, nose, throat, and lungs. May cause skin irritation and/or dermatitis.

Appearance liquid

Odor little or no odor

Potential Health Effects Principal Routes of Exposure

Eye contact, skin contact and inhalation.

Acute Effects _____________________________________________________________________________________________ Page 1 / 9

Revision Date: 04-Nov-2011 N103 - MOORGARD 100% ACRYLIC LOW LUSTRE HOUSE PAINT _____________________________________________________________________________________________ Eyes Skin Inhalation Ingestion Chronic Effects

May cause slight irritation.

Substance may cause slight skin irritation.

May cause irritation of respiratory tract.

Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Repeated contact may cause allergic reactions in very susceptible persons.

Contains: Crystalline Silica which has been determined to be carcinogenic to humans

by IARC (1) when in respirable form. Risk of cancer depends on duration and level of inhalation exposure to spray mist or dust from sanding the dried paint.

See Section 11 for additional Toxicological information.

Aggravated Medical Conditions HMIS

Health: 1*

None known Flammability: 0

Reactivity: 0

PPE: -

HMIS Legend 0 - Minimal Hazard 1 - Slight Hazard 2 - Moderate Hazard 3 - Serious Hazard 4 - Severe Hazard * - Chronic Hazard X - Consult your supervisor or S.O.P. for "Special" handling instructions.

Note: The PPE rating has intentionally been left blank. Choose appropriate PPE that will protect employees from the hazards the material will present under the actual normal conditions of use.

Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks.

Although HMIS® ratings are not required on MSDSs under 29 CFR 1910.1200, the preparer, has choosen to provide them. HMIS® ratings are to be used only in conjunction with a fully implemented HMIS® program by workers who have received appropriate HMIS® training. HMIS® is a registered trade and service mark of the NPCA. HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.

4. FIRST AID MEASURES General Advice

No hazards which require special first aid measures.

Eye Contact

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.

Skin Contact

Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes.

Inhalation

Move to fresh air. If symptoms persist, call a physician.

Ingestion

Clean mouth with water and afterwards drink plenty of water. Consult a physician if necessary.

Notes To Physician

Treat symptomatically

5. FIRE-FIGHTING MEASURES

_____________________________________________________________________________________________ Page 2 / 9

Revision Date: 04-Nov-2011 N103 - MOORGARD 100% ACRYLIC LOW LUSTRE HOUSE PAINT _____________________________________________________________________________________________

5. FIRE-FIGHTING MEASURES Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Suitable Extinguishing Media

Protective Equipment And Precautions For Firefighters As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

Specific Hazards Arising From The Chemical

Closed containers may rupture if exposed to fire or extreme heat.

Sensitivity To Mechanical Impact

No

Sensitivity To Static Discharge

No

Flash Point Data Flash Point (°F) Flash Point (°C) Flash Point Method

Not applicable Not applicable Not applicable

Flammability Limits In Air Lower Explosion Limit Upper Explosion Limit

Not applicable Not applicable

NFPA

Health: 1

Flammability: 0

Instability: 0

Special: Not Applicable

NFPA Legend 0 - Not Hazardous 1 - Slightly 2 - Moderate 3 - High 4 - Severe The ratings assigned are only suggested ratings, the contractor/employer has ultimate responsibilities for NFPA ratings where this system is used.

Additional information regarding the NFPA rating system is available from the National Fire Protection Agency (NFPA) at www.nfpa.org.

6. ACCIDENTAL RELEASE MEASURES Personal Precautions

Avoid contact with skin, eyes and clothing. Ensure adequate ventilation.

Environmental Precautions

Prevent further leakage or spillage if safe to do so.

Methods For Clean-Up

Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal.

Other Information

None known

7. HANDLING AND STORAGE Handling

Avoid contact with skin, eyes and clothing. Avoid breathing vapors, spray mists or sanding dust. In case of insufficient ventilation, wear suitable respiratory equipment.

_____________________________________________________________________________________________ Page 3 / 9

N103 - MOORGARD 100% ACRYLIC LOW LUSTRE Revision Date: 04-Nov-2011 HOUSE PAINT _____________________________________________________________________________________________ Keep container tightly closed. Keep out of the reach of children.

Storage

8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Limits

Hazardous Components Chemical Name Titanium dioxide Silica, crystalline

ACGIH 10 mg/m3 - TWA 0.025 mg/m3 - TWA

Nepheline syenite Kaolin

N/E 2 mg/m3 - TWA

Zinc oxide Diatomaceous earth

2 mg/m3 - TWA 10 mg/m3 - STEL N/E

Silica, mica Silica, amorphous

3 mg/m3 - TWA N/E

Carbon black

3.5 mg/m3 - TWA

OSHA 15 mg/m3 - TWA total respirable - (10)/(%SiO2 + 2) mg/m3 TWA respirable - (250)/(%SiO2 + 5) mppcf TWA total dust - (30)/(%SiO2 + 2) mg/m3 TWA 5 mg/m3 - TWA (nuisance dust) 15 mg/m3 - TWA total 5 mg/m3 - TWA 15 mg/m3 - TWA total 5 mg/m3 - TWA - (80)/(% SiO2) mg/m3 TWA 20 mppcf - TWA 20 mppcf - TWA - (80)/(% SiO2) mg/m3 TWA 20 mppcf - TWA 3.5 mg/m3 - TWA

Legend ACGIH - American Conference of Governmental Industrial Hygienists Exposure Limits OSHA - Occupational Safety & Health Administration Exposure Limits N/E - Not Established

Engineering Measures

Ensure adequate ventilation, especially in confined areas.

Personal Protective Equipment Eye/Face Protection Skin Protection Respiratory Protection

Safety glasses with side-shields.

Protective gloves and impervious clothing.

In case of insufficient ventilation wear suitable respiratory equipment.

Hygiene Measures

Avoid contact with skin, eyes and clothing. Remove and wash contaminated clothing before re-use. Wash thoroughly after handling.

9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Odor Density (lbs/gal) Specific Gravity pH Evaporation Rate Vapor Pressure Vapor Density Wt. % Solids

liquid little or no odor 9.5 - 11.4 1.13 - 1.37 Not available Not available Not available Not available 40 - 60

_____________________________________________________________________________________________ Page 4 / 9

N103 - MOORGARD 100% ACRYLIC LOW LUSTRE Revision Date: 04-Nov-2011 HOUSE PAINT _____________________________________________________________________________________________

9. PHYSICAL AND CHEMICAL PROPERTIES Vol. % Solids Wt. % Volatiles Vol. % Volatiles VOC Regulatory Limit (g/L) Boiling Point (°F) Boiling Point (°C) Freezing Point (°F) Freezing Point (°C) Flash Point (°F) Flash Point (°C) Flash Point Method Upper Explosion Limit Lower Explosion Limit

30 - 50 40 - 60 50 - 70 < 50 212 100 32 0 Not applicable Not applicable Not applicable Not applicable Not applicable

10. STABILITY AND REACTIVITY Chemical Stability

Stable under normal conditions.

Conditions To Avoid

Prevent from freezing

Incompatible Materials

No materials to be especially mentioned.

Hazardous Decomposition Products

None under normal use.

Possibility Of Hazardous Reactions

None under normal conditions of use.

11. TOXICOLOGICAL INFORMATION Acute Toxicity Product No information available Component Titanium dioxide LD50 Oral: > 10000 mg/kg (Rat) LD50 Dermal: > 10000 mg/m³ (Rabbit) LC50 Inhalation (Dust): > 6.82 mg/L (Rat, 4 hr.)

Silica, crystalline LD50 Oral: 500 mg/kg (Rat) vendor data Nepheline syenite Sensitization: No sensitizing effects known.

Kaolin

_____________________________________________________________________________________________ Page 5 / 9

N103 - MOORGARD 100% ACRYLIC LOW LUSTRE Revision Date: 04-Nov-2011 HOUSE PAINT _____________________________________________________________________________________________ LD50 Oral: > 5000 mg/kg (Rat) Zinc oxide LD50 Oral: > 8437 mg/kg (Rat) LC50 Inhalation (Dust): > 5700 mg/m³ (Rat, 4 hr.)

Silica, amorphous LD50 Oral: > 5000 mg/kg (Rat) LD50 Dermal: 2,000 mg/kg (Rabbit) LC50 Inhalation (Dust): > 2 mg/L Carbon black LD50 Oral: > 15400 mg/kg (Rat) LD50 Dermal: > 3000 mg/kg (Rabbit) Chronic Toxicity Carcinogenicity The information below indicates whether each agency has listed any ingredient as a carcinogen: Chemical Name

ACGIH

Titanium dioxide

Silica, crystalline

A2 - Suspected Human Carcinogen

IARC

NTP

2B - Possible Human Carcinogen 1 - Human Carcinogen

OSHA Carcinogen Listed

Known Human Carcinogen

Listed

2B - Possible Human Carcinogen

Carbon black

Listed

• Crystalline Silica has been determined to be carcinogenic to humans by IARC (1) when in respirable form. Risk of cancer depends on duration and level of inhalation exposure to spray mist or dust from sanding the dried paint.

• Although IARC has classified titanium dioxide as possibly carcinogenic to humans (2B), their summary concludes: "No significant exposure to titanium dioxide is thought to occur during the use of products in which titanium dioxide is bound to other materials, such as paint."

Legend ACGIH - American Conference of Governmental Industrial Hygienists IARC - International Agency for Research on Cancer NTP - National Toxicity Program OSHA - Occupational Safety & Health Administration

12. ECOLOGICAL INFORMATION Ecotoxicity Effects

Product Acute Toxicity to Fish No information available _____________________________________________________________________________________________ Page 6 / 9

N103 - MOORGARD 100% ACRYLIC LOW LUSTRE Revision Date: 04-Nov-2011 HOUSE PAINT _____________________________________________________________________________________________

12. ECOLOGICAL INFORMATION Acute Toxicity to Aquatic Invertebrates No information available Acute Toxicity to Aquatic Plants No information available

Component Acute Toxicity to Fish Titanium dioxide LC50: >1000 mg/L (Fathead Minnow - 96 hr.)

Acute Toxicity to Aquatic Invertebrates No information available Acute Toxicity to Aquatic Plants No information available

13. DISPOSAL CONSIDERATIONS Waste Disposal Method

Dispose of in accordance with federal, state, and local regulations. Dry, empty containers may be recycled in a can recycling program. Local requirements may vary, consult your sanitation department or state-designated environmental protection agency for more disposal options.

14. TRANSPORT INFORMATION DOT

Not regulated

ICAO / IATA

Not regulated

IMDG / IMO

Not regulated

15. REGULATORY INFORMATION International Inventories United States TSCA Canada DSL

Yes - All components are listed or exempt.

Yes - All components are listed or exempt.

Federal Regulations SARA 311/312 hazardous categorization _____________________________________________________________________________________________ Page 7 / 9

N103 - MOORGARD 100% ACRYLIC LOW LUSTRE Revision Date: 04-Nov-2011 HOUSE PAINT _____________________________________________________________________________________________ Acute Health Hazard Chronic Health Hazard Fire Hazard Sudden Release of Pressure Hazard Reactive Hazard

No Yes No No No

SARA 313 Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product contains a chemical or chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372: Chemical Name Zinc oxide

Weight % (max) 5

CAS-No 1314-13-2

This product may contain trace amounts of (other) SARA reportable chemicals. Contact the preparer for further information.

Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61) This product contains the following HAPs: This product may contain trace amounts of (other) HAPs chemicals. Contact the preparer for further information.

State Regulations California Proposition 65 This product may contain small amounts of materials known to the state of California to cause cancer or reproductive harm.

State Right-to-Know Chemical Name Titanium dioxide Silica, crystalline Kaolin Zinc oxide Diatomaceous earth Silica, mica Silica, amorphous Carbon black

Massachusetts X X X X X X X

New Jersey X X X X X X X X

Pennsylvania X X X X X X X

Louisiana

Rhode Island X X X X X X X

Legend X - Listed

16. OTHER INFORMATION

_____________________________________________________________________________________________ Page 8 / 9

N103 - MOORGARD 100% ACRYLIC LOW LUSTRE Revision Date: 04-Nov-2011 HOUSE PAINT _____________________________________________________________________________________________ WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Prepared By

Product Stewardship Department Benjamin Moore & Co. 360 Route 206 - P.O. Box 4000 Flanders, NJ 07836 866-690-1961

Revision Date: Revision Summary

04-Nov-2011 Not available

Disclaimer The information contained herein is presented in good faith and believed to be accurate as of the effective date shown above.

This information is furnished without warranty of any kind. Employers should use this information only as a supplement to other information gathered by them and must make independent determination of suitability and completeness of information from all sources to assure proper use of these materials and the safety and health of employees. Any use of this data and information must be determined by the user to be in accordance with applicable federal, provincial, and local laws and regulations.

End of MSDS

_____________________________________________________________________________________________ Page 9 / 9

Product Data Sheet 710 Forest Avenue | P.O. Box 102 Sheboygan Falls, WI 53085 | USA Toll-Free 1-800-558-7596 (920) 467-2471 | (920) 467-8674 Fax service@torginol.com | www.torginol.com

ColorFlakes™ Decorative Vinyl Color Chips/Flakes For use in Seamless, Resin-based FlooringSystems For more information, please visit our website at: www.torginol.com

DESCRIPTION

CHARACTERISTICS

Product Name: Decorative Vinyl Color Chips/Flakes Trade Name: ColorFlakes ™

Color: Spectrophotometer ∆E ≤ 1.0

Manufacturer: Torginol, Inc. P.O. Box 102 710 Forest Avenue Sheboygan Falls, WI 53085 USA (800) 558-7596 toll-free (920) 467-2471 telephone (920) 467-8674 facsimile www.torginol.com service@torginol.com

Dry Film Thickness: Micrometer ASTM Mils Dry

Torginol ColorFlakes™ , also known as color chips, flake or fleck are composed of waterbased resin materials, inorganic minerals, additives and various pigments. This unique product is integrally pigmented, brilliantly colored, random in shape, sized within a standardized range and custom blended with infinite options to achieve optimal appearance and texture qualities with a resin-based flooring or wall-coating system.

ColorFlakes™ Advantages: ▪ Custom design to match any décor ▪ Over 150 color-styles "in-stock" ▪ Non-flammable ▪ Water-based chemistry ▪ Optimal flexibility & strength ▪ Colorfast, UV stable pigments ▪ Forgiving application ▪ Fast turnaround times ▪ Custom color-matching available ▪ Six standard sizing options ▪ Infinite custom-blending options ▪ Custom blend-matching expertise ▪ Lab tested resin compatibility ▪ Suitable in many environments ▪ Custom packaging & label options ▪ No minimum order quantities ▪ Diligent quality control program ▪ Hide sub-surface imperfections

Sizing Options: ASTM E1866

Pass

4 - 5 mils

1/2" Pass

Odor: Olfactory Evaluation Odorless

ASTM D1296

Surface Texture: Visual Evaluation Smooth Metamerism: Visual Evaluation Nonmetameric

Pass

1/4"

Pass

1/8" ASTM D4086

Pass

ASTM D523

Pass

1/16"

Dry Film Flexibility: Mandrel Bend Test ASTM F137* Interior Angle ≤ 110° Pass Hiding Power: Visual Evaluation Opacity > 98%

1/32" ASTM D6762

Pass (except color C2250)

Size Distribution: Normal Sieve Analysis

(100g / 90sec)

*ASTM procedure modified to accommodate the unique characteristics of ColorFlakes™ material.

Updated: January, 2011

Original (~1")

D1005

Shape: Visual Evaluation Random

Sheen: 60° Gloss Meter <15 units

SIZING & BLENDING

PRODUCT DATA SHEET

Custom Blending: Use ColorFlakes™ to coordinate your floors and walls with any décor. Our extensive line of ColorFlakes gives you the ability to custom design blends to match any color-scheme.

Either choose from one of our signature blend designs or creatively mix and match colors to develop a unique color array that best fits your project. Call 1-800-558-7596 for more information and to request samples...

Page 1 of 2

ColorFlakes™ Decorative Vinyl Color Chips/Flakes

COLOR INDEX

APPLICATION

SYSTEM COMPATIBILITY

(Sorted by Item Number) Standard Colors C1000 (Adobe Beige) C1020 (Amethyst) C1040 (Autumn Brown) C1045 (Beige) C1050 (Black) C1055 (Brick Red) C1060 (Brown) C1070 (Burgundy) C1080 (Canyon Red) C1090 (Charcoal) C1100 (Cocoa Brown) C1120 (Crest Green) C1130 (Dark Blue) C1140 (Delray Blue) C1160 (Dove Gray) C1200 (Dusk Blue) C1320 (Fawn) C1360 (Forest Green) C1400 (Gold) C1410 (Granite) C1415 (Graphite) C1420 (Hunter Green) C1425 (Ivory) C1430 (Jasper) C1480 (Medium Gray) C1520 (Milkweed) C1560 (Mint Green) C1570 (Mustard) C1600 (Olive) C1640 (Patio Red) C1680 (Peach) C1720 (Powder Blue) C1760 (Rose) C1770 (Salmon) C1780 (Scone) C1785 (Tan) C1790 (True Blue) C1800 (Whisper Gray) C1820 (White) C2160 (Orange) C2200 (Primary Yellow) C2240 (Red) C2250 (Semi-Transparent White) C5051 (Afterglow) C5052 (Chocolate) C5101 (Seaspray) C5102 (Lime) C5103 (Sorbet) C5104 (African Violet) C5114 (Ebony) C5115 (Putty) C5116 (Wigwam) C5117 (Acorn) C5118 (Fireweed) C5252 (Cement) C5301 (Cornmeal) C5302 (Cardboard) C5303 (Cappuccino) C5304 (Mud) C5305 (Tabu) C5306 (Porpoise) C5307 (Camelback) C5910 (JD Green) C5920 (Cyberspace) C5935 (Rustic Red) C6601 (Buff) C6602 (Latte) C6604 (Primary Blue) C6606 (Neutral Gray) C6607 (Clay) C6609 (Burnt Red) C6611 (Evergreen) C6612 (Creamy Orange) C6613 (Sage) C6614 (Cream) C6615 (Pumpkin) C6616 (Lemon Yellow) C6617 (Teal) C6621 (Stormy Blue) C6622 (Sunrise Yellow) C6721 (Lipstick Red) C6723 (Camo Green) C6804 (Gladiola)

Updated: January, 2011

C7551 (Terra Cotta) C9800 (Sommelier) C9801 (Dolphin) C9805 (Carrot Cake) C9806 (Flesh) C9902 (Black Iron Oxide) C9903 (Online) C9904 (Dark Grey) C9905 (Heaven) C9907 (Blue Ox) C9908 (Canary Yellow) C9909 (Sugar Cookie) C9910 (Buttermilk) C9911 (Fossil) C9912 (Toast) C9916 (Favre) C9920 (Cherry Bomb) C9951 (Plum) C9952 (Aquamarine) C9953 (Honeydew) C9954 (Caramel) C9955 (Battleship Gray) C9956 (Khaki) C9957 (Taupe) C9958 (Alpaca White) C9959 (Antique White) C9960 (Navajo Beige) C9961 (Functional Gray) C9962 (Jetstream) C9963 (Cobalt Blue) C9964 (Sky Blue) C9965 (Lavender) C9966 (Morning Fog) C9967 (Royal Blue) C9968 (Steel Blue) C9969 (Navy) C9970 (Moss) C9971 (Peppermint) C9972 (Moody Blue) C9973 (Coppertone) C9974 (Brilliant Blue) C9975 (Raisin) C9977 (Daiquiri) C9978 (Tomato) C9979 (Squash) C9981 (Potter) C9982 (Gravy) C9983 (Hypnotic) C9984 (Sonic) C9985 (Susie-Q) C9986 (Eggshell) C9987 (Stone) C9988 (Baby Blue) C9989 (Purple Haze) C9990 (Slime) C9991 (Gardenview) C9992 (Cosmo) C9993 (Grape) C9994 (Sand Dune) C9995 (Berry) C9996 (Redwood) Varicolors C3000 (V.C. Brown) C3020 (V.C. Ewa Green) C3040 (V.C. Kona Beige) C3080 (V.C. Lanai Gray) C3100 (V.C. Maui Blue) C3120 (V.C. Pali Brown) C3160 (V.C. Rose) Phosphorescent Glow-in-the-Dark C9110 - Blue Glow C9120 - Green Glow Fluorescent Black Light Sensitive C4000 (Blaze Orange) C4040 (Chartreuse) C4080 (Hot Pink) C4120 (Rocket Red) C4160 (SIgnal Green) C4180 (Horizon Blue)

Floor Application Coverage Rates Flake Size Original (~1") 1/2" 1/4" 1/8" 1/16" 1/32"

Full 8-10 7-9 5-7 4-6 3-5 2-4

Partial 25-200 25-200 25-200 25-200 25-200 25-200

ft²/lb. ft²/lb. ft²/lb. ft²/lb. ft²/lb. ft²/lb.

*Coverage rates vary depending on customer preferences and application techniques. Torginol does not guarantee exact coverage rates.

Floor Application Methods Hand Broadcasting :

Lab tested resin chemical compatibility: • Epoxy • MMA • Polyurethane • Polyaspartic • Polyurea • And others...

• Various Polymers Note: In 40+ years of manufacturing ColorFlakes ™, there are no known resin incompatibilities. However, Torginol recommends unknown resin compatibility testing prior to use.

PRODUCT LIMITATIONS • ColorFlakes™ are random in shape due to our manufacturing process.

• Although the colorfast pigments in the ColorFlakes™ are UV stable, the specifications for the UV stability and environmental durability of your coating system will determine outdoor suitability.

• Due to inherent product characteristics, a small amount of finer particles will be present within each box.

Pneumatic Hopper-Blower Gun:

• Do NOT apply ColorFlakes™ in rain.

STORAGE Store ColorFlakes™ in an air tight poly-bag in a dry environment at room temp. to avoid moisture, humidity and product degradation.

TYPICAL SYSTEM (approximate dry film thickness: 15 - 30 mils)

CLEAR TOPCOAT COLORFLAKES™ PIGMENTED BASECOAT PRIMER / SEALER CONCRETE For best results, 10-15 mils of clear top-coating is recommended to fully encapsulate ColorFlakes™ and provide a durable wearing surface.

PRODUCT DATA SHEET

RECOMMENDED USES Aircraft Hangers Auto Dealerships Banquet Halls Bars, Pubs & Taverns Basements Bathrooms Bowling Alleys Butcher Shops Cafeterias Churches Clean Rooms Commercial Kitchens Dog Kennels Garage Floors Greenhouses Grocery Stores Hallways Hospitals Industrial Hallways Laboratories Laundromats Locker Rooms Lunch Rooms Night Clubs Offices Pet Stores Pharmaceutical Plants Public Municipalities Restaurants Restrooms Retail Stores Schools Show Rooms Stadium Hallways Zoos And more...

Page 2 of 2

STEEL STIFFENED CORE

DOOR SERIES - ST

ST SERIES

STEEL STIFFENED CORE KEY FEATURES Increased durability and security Interior and exterior usage Bonded 18-gauge steel stiffeners 6” o.c. with industrial adhesive Voids between stiffeners filled with: - Polystyrene, all door thickness available - Polyurethane, 1-3/4” door thickness only - Mineral wool, 1-3/4” door thickness only Edge seam options: - Lock seam (PA) 18- or 16-gauge - Lock seam and putty filled (PAF) 18- or 16-gauge - Continuously welded seamless edge (CW) 18-, 16-, 14- and 12-gauge R-Factor (metric values in parentheses) - STY: ASTM C1363: R1.54 (R0.27) - URE: ASTM C1363: R1.7 (R0.29) - MW: ASTM C1363: R1.8 (R0.32)

Performance Polystyrene: Windstorm Class 1, 70 PSF, 350 ft-lbs.

See Windstorm-resistant openings section p.33 for more details.

Fire Ratings Available up to 1-1/2 hours for polystyrene and mineral wool.

Please consult our chart on our website for size limitations.

STANDARD FEATURES A40 galvannealed material 16-gauge top and bottom welded inverted channel

OPTIONS A60 galvannealed material Flush or sealed top and bottom welded channel Laser welded stiffeners Primer for A40 and A60 Factory prefinishing – powder coat only

HARDWARE REINFORCEMENTS H inges: 10-gauge high-frequency (optional: 7-gauge plate) Closer: 16-gauge (optional: 14-gauge, 12-gauge) Locks: 12-gauge delafontaine.com

|

1 (800) 565-9230

11

ROUGH BUCK

SPECIALTY FRAME SERIES - RB

RB SERIES

Rough Buck FRAME Designed for retrofit openings, the rough buck frame will allow for adjustment to compensate for out-of-square masonry openings.

Key Features

A unique solution for retrofit applications.

Solid anchorage of the frame, does not require grouting.

Less-return finish frame.

U-channel 12-gauge sub frame butted to the masonry wall.

Pre-drilled holes for 1/4” (6.4 mm) Tapcon® screws.

14-gauge adjustable floor anchor.

Compression anchors at critical locations for accurate adjustment and tight-fitting miters.

Fire Ratings

Up to 1-1/2-hour (ITS/WHI) fire labelIONS

Standard Features A40 galvannealed steel

OPTIONS

A60 galvannealed steel

16-, 14- or 12- gauge steel

Primer for A40 and A60

26

delafontaine.com

|

1 (800) 565-9230

RB Series, Rough Buck Frame

Model: Solatube® Smart LED (10 in./250 mm Smart LED Daylighting System)

Project:

Location:

Type:

Product Specifications Appear in CSI Division 08, Section 08 62 23.

Model

S

1

6

0

Capture Zone

S

Delivery Zone

Transfer Zone

L

1

1

For budgeting and quotations use only. Qty:

2

2a

3

3a

4

4a

5

6

6a

6b

7

7a

Model

160 SL Smart LED Solatube 160 SL (10 in./250 mm Smart LED Daylighting System)

Capture Zone 2

Domes

DU Acrylic Dome - UL Approved DUI Acrylic Dome + Shock Inner Dome (Acrylic) - UL Approved Note: Required for High Velocity Hurricane Zones 2a

Dome Options

(Leave blank if not desired)

PB Dome Edge Protection Band 3

Flashings

FP 4-inch Pitched Metal, Self Mounted

F4 4-inch Flat/No Pitch Metal, Self Mounted

FPT Tile Roof, Pitched Metal Flashing

FT Tile Roof, No Pitch Metal Flashing

3a

Flashing Options

T2* T4* T12* T24*

F6 6-inch Flat/No Pitch Metal, Self Mounted

NO PHOTO

NO PHOTO

(Leave blank if not desired)

Roof Flashing Turret Extension 2 in./50 mm Roof Flashing Turret Extension 4 in./100 mm Roof Flashing Turret Extension 12 in./300 mm Roof Flashing Turret Extension 24 in./600 mm

T36* T48* FI MR

Roof Flashing Turret Extension 36 in./900 mm Roof Flashing Turret Extension 48 in./1200 mm Flashing Insulator Metal Roof Installation Kit

* Specify additional extension tubes in #4

Transfer Zone 4

Extension Tubes Required

Run measured from top of roof deck to bottom of ceiling plane along centerline of tubing.

E0 E1 E2 E3 E4 E5 E6

Base Kit, No Extension Tubes – Max Run = 24” One Extension Tube – Max Run = 46” Two Extension Tubes – Max Run = 68” Three Extension Tubes – Max Run = 90” Four Extension Tubes – Max Run = 112” Five Extension Tubes – Max Run = 134” Six Extension Tubes – Max Run = 156”

Assuming 6” high no-pitch flashing

E7 Seven Extension Tubes – Max Run = 178” E8 Eight Extension Tubes – Max Run = 200” E9 Nine Extension Tubes – Max Run =222” E10 Ten Extension Tubes – Max Run = 244” EXX Total Run Length to be Determined by Bidding Contractor

Solatube International, Inc. | 2210 Oak Ridge Way | Vista, CA 92081-8341 | T: 888.SOLATUBE | F: 760.597.4487 | www.solatube.com | Part No. 951802 v1.2

4a

A1 A2

Extension Tube Options (Leave blank if not desired) One 0-90 Degree Extension Tube (Angle Adapter) Two 0-90 Degree Extension Tubes (Angle Adapter)

E Wire Suspension Kit SCG Severe Climate Glazing

Delivery Zone 5

Smart LED Amplifier Source

430P Primary Smart LED Amplifier with 4 3000K LED Sources and Driver (120V, 17W) 430S Secondary Smart LED Amplifiers each with 4 3000K LED Sources (15W) - Driver not included

Note: Secondary Smart LED must be used in conjunction with the Primary Smart LED.

6

Diffusers/Decorative Fixtures*

L1 Classic OptiView® Diffuser

L4 Classic VusionTM Diffuser

L9 JustFrost Decorative Fixture

L10 TierDrop Decorative Fixture

L11 OptiView® Decorative Fixture

L12 VividShade Decorative Fixture

L13 QuadraFrost Decorative Fixture

L15 AuroraGlo Decorative Fixture (White)

L16 AuroraGlo Decorative Fixture (Bronze) *Must order Effect Lens; does not come standard

6a

LN LS 6b

OC 7

M 7a

Effect Lenses Natural Effect Lens Softening Effect Lens

LW LWS

Warm Effect Lens Warm Softening Effect Lens

Options (Leave blank if not desired) Occupancy Sensor

D

Daylight Dimmer™

Measurement Standard Metric I Imperial Driver Voltage

120 120-240 Volts Accessories

(Order separately)

SW Low voltage switch (white) required to operate Solatube Daylight Dimmers Note: Only one switch is required per ten (10)synchronously controlled dimmers.

CA

Two Conductor Low Voltage Cable (500 ft.)

Example

S160SL-DA-F4-E4-430P-L4-LN-OC-M-120 Smart LED Solatube 160 SL (10 in./250 mm Smart Daylighting System), Acrylic Dome, 4-inch high Flat/No Pitch Self Mounted Flashing, 4 Extension Tubes, Classic VusionTM Diffuser, Natural Effect Lens, 4 3000K Lamp Amplifier Primary Unit, Smart Occupancy Sensor and 120 Volt Smart Driver.

Solatube International, Inc. | 2210 Oak Ridge Way | Vista, CA 92081-8341 | T: 888.SOLATUBE | F: 760.597.4487 | www.solatube.com | Part No. 951802 v1.2

DURABILITYINANY COLOR YOU CHOOSE

BATHROOM Partitions Lockers Locker Room Benches Shower Cubicles Dressing Compartments Vanities

WE DON’T JUST TALK TOUGH. WE BACK IT UP. Proudly made in the USA, Scranton Products’ brands provide industryleading protection. Because Scranton Products is so confident that our solid plastic partitions will stand the test of time, they’re backed with a full 25-year warranty covering breakage, corrosion and delamination under normal conditions.

EASY ON THE ENVIRONMENT. As the industry leader in responsible recycling, Scranton Products is committed to reducing industrial waste. We use reclaimed material and offer 100% post-consumer recycled products. We also reclaim all of our scrap and off-cuts into production to create new sheets.

Incorporating our solid HDPE plastic products can contribute points toward LEED certification.

Call 800.445.5148 for the Scranton Products sales representative in your area, or visit scrantonproducts.com.

Just as there’s no limit to the toughness of Scranton Products bathroom partitions, now there’s no limit to color choices either.

Look inside and see which of our many style options best fits your project. Scranton Products offers a wide array of colors

Scranton Products

and textures—all for the same competitive price. Choose from

801 E. Corey Street

four stylish color collections and five unique textures.

Scranton, PA 18505 800.445.5148 Fax: 800.551.6993 info@scrantonproducts.com www.scrantonproducts.com

COLOR AND TEXTURE

DURABILITY IN ANY COLOR YOU CHOOSE

BATHROOM Partitions Lockers Locker Room Benches Shower Cubicles Dressing Compartments Vanities

WE DON’T JUST TALK TOUGH. WE BACK IT UP. Proudly made in the USA, Scranton Products’ brands provide industryleading protection. Because Scranton Products is so confident that our solid plastic partitions will stand the test of time, they’re backed with a full 25-year warranty covering breakage, corrosion and delamination under normal conditions.

EASY ON THE ENVIRONMENT. As the industry leader in responsible recycling, Scranton Products is committed to reducing industrial waste. We use reclaimed material and offer 100% post-consumer recycled products. We also reclaim all of our scrap and off-cuts into production to create new sheets.

Incorporating our solid HDPE plastic products can contribute points toward LEED certification.

Call 800.445.5148 for the Scranton Products sales representative in your area, or visit scrantonproducts.com.

Just as there’s no limit to the toughness of Scranton Products bathroom partitions, now there’s no limit to color choices either.

Look inside and see which of our many style options best fits your project. Scranton Products offers a wide array of colors

Scranton Products

and textures—all for the same competitive price. Choose from

801 E. Corey Street

four stylish color collections and five unique textures.

Scranton, PA 18505 800.445.5148 Fax: 800.551.6993 info@scrantonproducts.com www.scrantonproducts.com

COLOR AND TEXTURE

TEXTURE KEY:

ORANGE PEEL

EX

STANDARD

HAMMERED

CONTOUR

ROTARY BRUSHED

special order*

METALLIC

COLOR COLLECTION

DESIGNER

COLOR COLLECTION

Color matching is limited by printing process. Actual samples available and recommended prior to color selections. *Special orders require extended lead times. Minimum order requirements may apply.

If you’re looking for the toughness of solid plastic with the brilliance of metal, look no further than our new Metallic Collection.

For optimal realism, choose a Hammered or Rotary Brushed texture.

CLASSIC

Take a look at the new, trend-setting additions to our color palette. These rich Designer shades lend a distinctly modern feel to any interior. To enhance a bold, contemporary look, consider pairing the Designer Collection with our Contour texture.

COLOR COLLECTION STAINLESS

Choose any of these popular, versatile colors from our Classic Collection to achieve a crisp, clean look matching any style

BRONZE

NICKEL

MAHOGANY

JAVA

SEQUOIA

SHALE

CONCRETE

TITANIUM

Swatches shown in Hammered.

or decor. Our Classic Collection is most often selected in Orange Peel or EX textures.

MOSAIC

COLOR COLLECTION

Mahogany, Java and Sequoia shown in Contour. Shale, Concrete and Titanium shown in Orange Peel.

Add natural beauty and depth to any design with our Mosaic Collection. Speckled with a medley of hues, the earthiness FOSSIL

CHARCOAL GREY

BLACK

of this collection really comes through when combined with Orange Peel texture.

TEXTURES Promising a clean, modern and distinctive look and feel, all Scranton Products partitions are available with a choice of five unique textures. By reducing signs of wear and deterring graffiti, these surface textures will keep any interior looking great GREY

BURGUNDY

MOCHA

BLUEBERRY

WHITE

DESERT BEIGE

PARCHMENT

HUNTER GREEN

LINEN

Swatches shown in Orange Peel.

BLUESTONE BLUESTONE

GRAVEL GRAVEL

SANDCASTLE

ONYX ONYX

PAISLEY

SANDSTONE

STORM STORM

CHESTNUT CHESTNUT

Swatches shown in Orange Peel.

GLACIER GREY

for years to come.

ORANGE PEEL

EX

CONTOUR

HAMMERED

Rotary Brushed

TEXTURE KEY:

ORANGE PEEL

EX

STANDARD

HAMMERED

CONTOUR

ROTARY BRUSHED

special order*

METALLIC

COLOR COLLECTION

DESIGNER

COLOR COLLECTION

Color matching is limited by printing process. Actual samples available. *Special orders require extended lead times. Minimum order requirements may apply.

If you’re looking for the toughness of solid plastic with the brilliance of metal, look no further than our new Metallic Collection.

For optimal realism, choose a Hammered or Rotary Brushed texture.

CLASSIC

Take a look at the new, trend-setting additions to our color palette. These rich Designer shades lend a distinctly modern feel to any interior. To enhance a bold, contemporary look, consider pairing the Designer Collection with our Contour texture.

COLOR COLLECTION STAINLESS

Choose any of these popular, versatile colors from our Classic Collection to achieve a crisp, clean look matching any style

BRONZE

NICKEL

MAHOGANY

JAVA

SEQUOIA

SHALE

CONCRETE

TITANIUM

Swatches shown in Hammered.

or decor. Our Classic Collection is most often selected in Orange Peel or EX textures.

MOSAIC

COLOR COLLECTION

Mahogany, Java and Sequoia shown in Contour. Shale, Concrete and Titanium shown in Orange Peel.

Add natural beauty and depth to any design with our Mosaic Collection. The speckled nature of these patterns really FOSSIL

CHARCOAL GREY

BLACK

comes through when combined with Orange Peel texture.

TEXTURES Promising a clean, modern and distinctive look and feel, all Scranton Products partitions are available with a choice of five unique textures. By reducing signs of wear and deterring graffiti, these surface textures will keep any interior looking great GREY

BURGUNDY

MOCHA

BLUEBERRY

WHITE

DESERT BEIGE

PARCHMENT

HUNTER GREEN

LINEN

Swatches shown in Orange Peel.

BLUESTONE BLUESTONE

GRAVEL GRAVEL

SANDCASTLE

ONYX ONYX

PAISLEY

SANDSTONE

STORM STORM

Swatches shown in Orange Peel.

CHESTNUT GLACIER GREY CHESTNUT

for years to come.

ORANGE PEEL

EX

CONTOUR

HAMMERED

Rotary Brushed

TEXTURE KEY:

ORANGE PEEL

EX

STANDARD

HAMMERED

CONTOUR

ROTARY BRUSHED

special order*

METALLIC

COLOR COLLECTION

DESIGNER

COLOR COLLECTION

Color matching is limited by printing process. Actual samples available and recommended prior to color selections. *Special orders require extended lead times. Minimum order requirements may apply.

If you’re looking for the toughness of solid plastic with the brilliance of metal, look no further than our new Metallic Collection.

For optimal realism, choose a Hammered or Rotary Brushed texture.

CLASSIC

Take a look at the new, trend-setting additions to our color palette. These rich Designer shades lend a distinctly modern feel to any interior. To enhance a bold, contemporary look, consider pairing the Designer Collection with our Contour texture.

COLOR COLLECTION STAINLESS

Choose any of these popular, versatile colors from our Classic Collection to achieve a crisp, clean look matching any style

BRONZE

NICKEL

MAHOGANY

CONCRETE

TITANIUM

Swatches shown in Hammered.

or decor. Our Classic Collection is most often selected in Orange Peel or EX textures.

MOSAIC

COLOR COLLECTION

SHALE

Mahogany, Java and Sequoia shown in Contour. Shale, Concrete and Titanium shown in Orange Peel.

Add natural beauty and depth to any design with our Mosaic Collection. Speckled with a medley of hues, the earthiness FOSSIL

CHARCOAL GREY

BLACK

of this collection really comes through when combined with Orange Peel texture.

TEXTURES Promising a clean, modern and distinctive look and feel, all Scranton Products partitions are available with a choice of five unique textures. By reducing signs of wear and deterring graffiti, these surface textures will keep any interior looking great GREY

BURGUNDY

MOCHA

BLUEBERRY

WHITE

DESERT BEIGE

PARCHMENT

HUNTER GREEN

LINEN

Swatches shown in Orange Peel.

BLUESTONE BLUESTONE

GRAVEL GRAVEL

SANDCASTLE

ONYX ONYX

PAISLEY

SANDSTONE

STORM STORM

CHESTNUT CHESTNUT

Swatches shown in Orange Peel.

GLACIER GREY

for years to come.

ORANGE PEEL

EX

CONTOUR

HAMMERED

Rotary Brushed

DURABILITYINANY COLOR YOU CHOOSE

BATHROOM Partitions Lockers Locker Room Benches Shower Cubicles Dressing Compartments Vanities

WE DON’T JUST TALK TOUGH. WE BACK IT UP. Proudly made in the USA, Scranton Products’ brands provide industryleading protection. Because Scranton Products is so confident that our solid plastic partitions will stand the test of time, they’re backed with a full 25-year warranty covering breakage, corrosion and delamination under normal conditions.

EASY ON THE ENVIRONMENT. As the industry leader in responsible recycling, Scranton Products is committed to reducing industrial waste. We use reclaimed material and offer 100% post-consumer recycled products. We also reclaim all of our scrap and off-cuts into production to create new sheets.

Incorporating our solid HDPE plastic products can contribute points toward LEED certification.

Call 800.445.5148 for the Scranton Products sales representative in your area, or visit scrantonproducts.com.

Just as there’s no limit to the toughness of Scranton Products bathroom partitions, now there’s no limit to color choices either.

Look inside and see which of our many style options best fits your project. Scranton Products offers a wide array of colors

Scranton Products

and textures—all for the same competitive price. Choose from

801 E. Corey Street

four stylish color collections and five unique textures.

Scranton, PA 18505 800.445.5148 Fax: 800.551.6993 info@scrantonproducts.com www.scrantonproducts.com

COLOR AND TEXTURE

PHENOLIC (BLACK CORE) FLOOR ANCHORED/OVERHEAD BRACED TOILET COMPARTMENTS

P A R T I T I O N S PART-1 GENERAL 1.01 DESCRIPTION A. Phenolic compartment work includes the following: 1. Floor anchored/overhead braced partitions.

B. Furnish all labor and materials necessary for the completion of work in this section as shown on the contract drawings and specified herein.

C. Work in this section shall include but is not limited to: 1. Toilet compartments 2. Hardware for toilet compartments 3. Shop drawings and working drawings 4. Manufacturer’s guarantee D. Related work specified elsewhere shall include accessories and anchorage/blocking for attachment of compartments.

1.02 PRODUCTS A. Submittal of shop drawings and details, for architect’s approval.

B. Colors shall be selected from the manufacturer’s standard range of colors.

C. Color and hardware samples shall be submitted for approval to the architect upon request.

PART-2 PRODUCTS 2.01 MANUFACTURER A. Toilet compartments to be supplied by Global Partitions Corp., Eastanollee, Georgia, 30538.

2.02 MATERIALS A. Doors shall be constructed of ¾” solid phenolic core decorative plastic laminate with multiple resin-impregnated kraft and surface sheets fused at high temperature and pressure.

B. Panels shall be constructed of ½” solid phenolic core decorative plastic laminate with multiple resin-impregnated kraft and surface sheets fused at high temperature and pressure.

C. Pilasters shall be constructed of ¾” solid phenolic core decorative plastic laminate with multiple resin-impregnated kraft and surface sheets fused at high temperature and pressure.

2.03 CONSTRUCTION A. Doors shall be constructed of ¾” solid phenolic core decorative plastic laminate with multiple resin-impregnated kraft and surface sheets fused at high temperature and pressure; the edges being finished and polished.

B. Panels shall be constructed of ½” solid phenolic core decorative plastic laminate with multiple resin-impregnated kraft and surface sheets fused at high temperature and pressure; the edges being finished and polished.

C. Pilasters shall be constructed of ¾” solid phenolic core decorative plastic laminate with multiple resin-impregnated kraft and surface sheets fused at high temperature and pressure; the edges being finished and polished. Pilasters shall include a mounting system comprising a 1/4” x 3/4” stainless steel bar attached to the pilaster having 3/8” zinc plated steel bolts secured to nuts imbedded within a contoured aperture transversely piercing the core at least 1” above the mounting end. Each mounting bar shall be secured to the building structure with 3/8” zinc plated steel studs.

D. Headrail shall be provided to bridge all compartments and brace the end freestanding pilasters to the wall; the headrail to comprise anodized aluminum with satin finish, contoured to provide anti-grip features.

2.04 HARDWARE (NOTE: Refer to the ORDER INFORMATION CONTRACT for specific hardware to be supplied on your order.)

A. All exposed door hardware shall be as noted: 1. Heavy-duty diecast (vault) zamac hinge shall have gravity-acting cams and are fabricated from a die cast aluminum alloy with a brushed finish and wrap around flanges. The cam is constructed from a ¾” diameter nylon rod and a 3/8” stainless steel pin. Slide latch, strike/keeper and hinges are through-bolted onto doors and pilasters using stainless steel vandal-resistant through bolts. Hinges are easily adjusted at the jobsite to a full close or partially open position, as required. Keeper provides for emergency access into the stall by lifting up on the bottom of the door.

2. Optional: Continuous stainless steel hinge. Slide latch, strike/keeper and hinges are through bolted onto doors and pilasters using stainless steel, vandal-resistant through bolts.

B. Panel and pilaster brackets shall be as noted: 1. Stainless steel stirrup brackets shall be 2” long. Stirrup brackets shall be 1/8” thick and mounted with stainless steel, vandal-resistant screws. Panels shall be attached with stainless steel, vandal-resistant through bolts. The attachment of brackets to the adjacent wall construction shall be accomplished with 2 ½” stainless steel vandalresistant screws and plastic anchors.

2. Optional: Continuous heavy duty anodized extruded aluminum (6063-T5 alloy) wall brackets are pre-drilled.

Wall brackets are mounted with stainless steel, vandal-resistant screws. The attachment of brackets to the adjacent wall construction shall be accomplished with 2 ½” stainless steel vandal resistant screws and plastic anchors.

3. Optional: Continuous heavy duty stainless steel wall brackets are pre-drilled. Wall brackets are mounted with stainless steel, vandal-resistant screws. The attachment of brackets to the adjacent wall construction shall be accomplished with 2 ½” stainless steel vandal resistant screws and plastic anchors.

C. Pilaster shoes shall be of type 304 steel #4 finish.

D. Headrail shall be made of heavy-duty anodized extruded aluminum (6063-T5 alloy). Headrail is anti-grip and attaches to the top of the pilaster with stainless steel, tamper-resistant screws. Headrail is attached to the adjacent wall construction with a headrail bracket.

E. Headrail brackets shall be made from a die cast aluminum alloy and shall be attached to the adjacent wall construction with 2 ½” stainless steel, tamper-resistant screws and plastic anchors.

PART-3 EXECUTION 3.01 PREPARATION A. Examine areas to receive toilet compartments for correct height and spacing of anchorage/blocking and plumbing fixtures that may affect installation of compartments. Report any discrepancies to the architect.

B. Take complete and accurate measurements of toilet compartment locations.

C. Start of work constitutes acceptance of job.

5.01 .052010 2171 Liberty Hill Road, Eastanollee, Georgia 30538 Phone: 706-827-2700 * Fax: 706-827-2710 www.globalpartitions.com * sales@globalpartitions.com

PHENOLIC (BLACK CORE) FLOOR ANCHORED/OVERHEAD BRACED TOILET COMPARTMENTS

P A R T I T I O N S 3.02 INSTALLATION A. Install compartments in a rigid, straight, plumb and level manner as shown on the shop drawings and manufacturer’s installation instructions.

B. All doors and panels to be mounted at 12” above the finished floor.

C. Clearance at vertical edges of door shall be uniform top to bottom.

D. No evidence of cutting, drilling and/or patching shall be visible on the finished work.

E. Finished surfaces shall be cleaned after installation and be left free of all imperfections.

3.03 WARRANTY A. Global Steel Products Corp. guarantees its black core phenolic units, properly maintained, against delamination, breakage or corrosion for 10 years from the date of receipt by the customer. If materials are found defective during that period for the reasons listed above, the material will be replaced free of charge. No credits or allowances will be issued for any labor or expenses relating to the replacement of components covered under the warranty plan. All such expenses are to be borne by the buyer.

5.02

BLOCKING BY OTHERS 2171 Liberty Hill Road, Eastanollee, Georgia 30538 Phone: 706-827-2700 * Fax: 706-827-2710 www.globalpartitions.com * sales@globalpartitions.com

.052010

AFWALL® MILLENIUM™ 1.6 GPF FLUSHOMETER TOILET SYSTEM

LESS EVERCLEAN® MANUAL FLUSH VALVE

BARRIER FREE

AFWALL® MILLENIUM™ 1.6 GPF FLUSHOMETER toilet system LESS EVERCLEAN®

❏ 2859.016 1.6 gpf Exposed Top Spud Bowl and Manual Flush Valve

BOWL: • Wall-mount elongated flushometer valve toilet • Vitreous china • High Efficiency. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf) • Conventional glaze • Condensation channel • Direct-fed siphon jet action • 1-1/2" inlet spud • Fully glazed 2-1/8" trapway • 10" x 12" water surface area • 100% factory flush tested • Bolt caps and seat not included • Model 2257.101 MANUAL FLUSH VALVE: • Manual Piston-Type Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls • Self-cleaning brass piston with integral wiper spring prevents clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Piston valve remains closed and does not need to be reset after loss of water pressure • ADA compliant non-hold open handle provides automatic shut-off after every flush • Positive seal ensures leak-free performance • No external volume adjustment • Durable chrome-plated cast brass construction is ideal for commercial applications • Chloramine-resistant EPDM seals • Adjustable tailpiece for rough-in flexibility • Can be installed left or right handed • Model 6047.161.002

Includes: • 047007-0070A Inlet spud (furnished with bowl) • 1" I.P.S. angle stop with back-flow prevention and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • High back pressure vacuum breaker with down tube • Spud coupling & flange for 1-1/2" top spud

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

System MaP* Score: • 1,000 grams of miso @ 1.6 gpf * Maximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.

Operating Pressure: Overall Range: 20-125 psi** Recommended: 25 psi (flowing)-80 psi (static) ** Water pressure over 80 psi is not recommended for most plumbing fixtures.

Flow Requirement: 25gpm (94.6 L/min.)

Nominal Fixture Dimensions: 660 x 356 x 381mm (26" x 14" x 15")

To Be Specified: ❏ Color: ❏ White ❏ Seat: 5901.100 American Standard Seat ❏ 5901.110 American Standard Seat with EverClean® ❏ Alternate Seat: 5905.100 Heavy Duty American Standard Seat ❏ 5905.110 Heavy Duty American Standard Seat with EverClean ❏ Carrier Fitting (by others):

© 2014 AS America Inc.

N113

6/14

AFWALL® MILLENIUM™ 1.6 GPF FLUSHOMETER TOILET SYSTEM

LESS EVERCLEAN® MANUAL FLUSH VALVE

2859.016 2859.128 2856.128 Fixture Compliance Certifications 2856.016 Meets or Exceeds the Following Specifications: 2856.111 BARRIER FREE

Valve Listings: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant

• ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures

FINISHED WALL 660mm (26") 73mm (2-7/8")

343mm (13-1/2")

SUPPLY DN 25mm (1" I.P.S.)

ROUGH-IN DIMENSION 293mm *CRITICAL (11-1/2") LEVEL

470mm (18-1/2")

-C-L-

C/L OF SEAT POST HOLES 140 mm (5-1/2") CENTER

333mm (13-1/8")

41mm (1-5/8")

356mm (14") 108 -133mm (4-1/4" to 5-1/4")

(4) Ø 22mm (7/8") HOLES

381mm (15")

229mm (9")

191mm (7-1/2") 133mm (5-1/4")

FINISHED FLOOR *Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 6" (152mm) above fixture. Consult Codes for details.

Valve Left or Right Hand Installation

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. When installed so that top of seat is 432 to 483mm (17" to 19") from the finished floor.

NOTES: WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED).

SUGGESTED 2mm (1/16) CLEARANCE BETWEEN FACE OF WALL AND BACK OF BOWL. TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. CARRIER FITTING AS REQUIRED TO BE FURNISHED BY OTHERS. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORT. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages

© 2014 AS America Inc.

N114

6/14

MADERA™ 16-1/2" HEIGHT 1.6 GPF FLUSHOMETER TOILET SYSTEM with EVERCLEAN® MANUAL FLUSH VALVE

BARRIER FREE

MADERA™ 16-1/2" HEIGHT 1.6 GPF FlushOmeter toilet system with EVERCLEAN®

❏ 2854.016 1.6 gpf Top Spud 16-1/2" Height Bowl and Manual Flush Valve

BOWL: • Floor mount elongated flushometer valve toilet • Vitreous china • High Efficiency. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf) • Permanent EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface • 10" or 12" roughing-in • 16-1/2" rim height for accessible application • Condensation channel • Powerful direct-fed siphon jet action • Fully glazed 2-1/8" trapway • 10" x 12" water surface area • 1-1/2" inlet spud • 100% factory flush tested • Less toilet seat • Model 3461.001 MANUAL FLUSH VALVE: • Self-cleaning brass piston with integral wiper spring prevents clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Piston valve remains closed and does not need to be reset after loss of water pressure • ADA compliant non-hold open handle provides automatic shut-off after every flush • Positive seal ensures leak-free performance • No external volume adjustment • Durable chrome-plated cast brass construction is ideal for commercial applications • Chloramine-resistant EPDM seals • Adjustable tailpiece for rough-in flexibility • Can be installed left or right hand • Model 6047.161

Includes: • 047007-0070A Inlet Spud (furnished with bowl) • 481310-100 2 Bolt caps with retainers (furnished with bowl) • 1" I.P.S. angle stop with back-flow prevention and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • High back pressure vacuum breaker with down tube • Spud coupling & flange for 1-1/2” top spud

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

System MaP* Score: • 1,000 grams of miso @ 1.6 gpf * Maximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Veritec Consulting, Inc. and Koeller and Company.

Operating Pressure: Overall Range: 20-125 psi** Recommended: 25 psi (flowing)-80 psi (static) ** Water pressure over 80 psi is not recommended for most plumbing fixtures.

Flow Requirement: 25gpm (94.6 L/min.)

Nominal Fixture Dimensions: 718 x 356 x 419mm (28-1/4" x 14" x 16-1/2")

To Be Specified: ❏ Color: ❏ White ❏ Seat: ❏ American Standard #5901.100 Heavy duty open front less cover ❏ American Standard #5905.100 Extra heavy duty open front less cover

© 2014 AS America Inc.

N41

7/14

MADERA™ 16-1/2" HEIGHT 1.6 GPF FLUSHOMETER TOILET SYSTEM with EVERCLEAN® MANUAL FLUSH VALVE

BARRIER FREE

Fixture Compliance Certifications Meets or Exceeds the Following Specifications:

Valve Listings: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant

• ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures

FINISHED WALL

102mm (4")

343mm (13-1/2")

718mm (28-1/4 " )

SUPPLY DN 25mm (1" I.P.S.)

356mm (14 " ) 108 -133mm (4-1/4" to 5-1/4")

-C-L-

470mm (18-1/2 " )

25mm (1")

*CRITICAL LEVEL

292mm (11-1/2")

C/L OF SEAT POST HOLES 140mm (5-1/2 " ) CENTERS

762mm (30 " )

419mm (16-1/2 " )

FINISHED FLOOR

13mm (1/2 " ) 254mm (10 " )

338mm 150mm (13-5/16 " ) (5-7/8")

238mm (9-3/8 " )

C/L OF OUTLET

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 6" (152mm) above fixture. Consult Codes for details.

Valve Left or Right Hand Installation

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES.

When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor.

NOTES: TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

© 2014 AS America Inc.

N42

7/14

SELECTRONIC™ TOILET FLUSH VALVE BATTERY POWERED, SENSOR OPERATED, 1.6 GPF MODEL NUMBER:

❑ 6065.161.002 Flush Valve for 11-1/2" Supply C\L to top of bowl, 1.6 gpf

❑ 6065.565.002 Retrofit for Existing Flush Valves, 1.6 gpf. Replaces industry standard manual and electronic valves. Does not include the vacuum breaker assembly, angle stop or sweat solder kit.

OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 25 psi (flowing)-80 psi (static) FLOW REQUIREMENT: 25gpm (94.6 L/min.)

GENERAL DESCRIPTION: Exposed, Battery Powered, Sensor Operated Selectronic™ Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls.

** Water pressure over 80 psi is not recommended for most plumbing fixtures.

Inlet includes 1" I.P.S. angle stop with back-flow protection, vandal-resistant cap, sweat solder kit, cover tube and wall flange.

ACCESSORIES: • Cast wall flanges (1" & 1-1/2") • Solid ring pipe supports (2-1/2" & 6" C-E) • Split ring pipe supports (2-1/2" & 6" C-E)

BATTERY LIFE: 200,000 cycles (4 years @ 4000 cycles per month)

Outlet includes 1-1/2" vacuum breaker with adjustable tailpiece, spud coupling and flange.

PRODUCT FEATURES: • Electronic flush valve with Selectronic ® proximity system for hygienic "Hands Free" operation • Self-cleaning piston with integral wiper spring helps prevent clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Positive seal ensures leak-free performance • Fully Mechanical Manual Override - allows valve to flush during a power failure • Fail-Safe Operation - valve automatically closes, and does not need to be reset, on loss of power or water pressure • Adjustable Sanitary Flush - valve automatically flushes after 24 hours of non-use to clean fixture & maintain trap seal • Sensor & electronic controls are fully enclosed and water resistant • Range can be adjusted manually or with optional remote control • Chemical resistant EPDM seals are unaffected by chloramines • Factory-installed CR-P2 lithium battery • No external volume adjustment • Adjustable tailpiece • Can be installed left or right-handed • ADA Compliant

TYPICAL WATER CLOSET INSTALLATION: AFWALL™ TOILET SHOWN FINISHED WALL 73mm (2-7/8")

409mm (16-1/8")

-C-L-

293mm (11-1/2")

SUPPLY DN 25mm (1" I.P.S.)

CRITICAL LEVEL SEE ROUGH-IN ON BACK

121mm, +13mm, -6mm (4-3/4")(+1/2", -1/4")

FINISHED FLOOR

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES

RECOMMENDED SPECIFICATION: Electronic proximity infrared sensor activated toilet flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Includes a fully mechanical manual over-ride that can provide a complete flush without battery power. Includes cast brass valve body and metal cover with chrome finish, vandal resistant stop cap and lithium battery. Angle stop with back-flow protection and vacuum breaker included. 1.6 gpf / 6.0 Lpf. Flush valve shall be American Standard Model # 6065.161.002, 6065.565.002.

L189 © 2013 AS America Inc.

Revised 3/13

SELECTRONIC™ TOILET FLUSH VALVE BATTERY POWERED, SENSOR OPERATED, 1.6 GPF

LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant

DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2")

Roughing-in Dimensions 72mm (2-7/8")

FINISHED WALL 57mm (2-1/4" MIN.) 15˚

116mm (4-5/8")

MANUAL OVERRIDE BUTTON

SUPPLY DN 25mm (1” I.P.S.)

*CRITICAL LEVEL -C-L-

115mm-134mm (4-1/2" TO 5-1/4") ROUGH-IN DIMENSION 293mm (11-1/2")

409mm (16-1/8")

165mm (6-1/2")

FOR 1-1/2" TOP SPUD FIXTURES

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6 " (152mm) above fixture. Consult Codes for details.

Right or Left Hand Installation

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES

L190 © 2013 AS America Inc.

Revised 3/13

Royal® Model Flushometer Description Exposed Water Closet Flushometer, for floor mounted or wall hung top spud bowls.

Flush Cycle £ Model 110 Water Saver (3.5 gpf/13.2 Lpf) £ Model 111 Low Consumption (1.6 gpf/6.0 Lpf) Specifications Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for left or right hand supply with the following features: • PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass • ADA Compliant Metal Oscillating Non-Hold-Open Handle with Triple Seal Handle Packing • 1” I.P.S. Screwdriver Bak-Chek® angle stop w/ free spinning vandal resistant stop cap • Adjustable Tailpiece • High Back Pressure Vacuum Breaker Flush Connection w/ One-piece Bottom Hex Coupling Nut • Spud Coupling and Flange for 1-1/2” Top Spud • Sweat Solder Adapter w/Cover Tube & Cast Wall Flange w/Set Screw • High Copper, Low Zinc Brass Castings for Dezincification Resistance • Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to Ensure Water Conservation • Flush Accuracy Controlled by CID Technology • Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX Rubber Compound for Chloramine Resistance Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037.

Variations £ XYV Valve Less Vacuum Breaker £ SG SaniGuard® Antimicrobial Coating Protects Handle and Socket* * SaniGuard does not protect users or others against disease-causing bacteria.

Accessories See Accessories Section of the Sloan catalog for details on these and other Flushometer variations.

Fixtures Consult Sloan for Sloan brand matching fixture options.

Made with Renewable Energy

This space for Architect/Engineer approval Job Name

Date

Model Specified

Quantity

Variations Specified Customer/Wholesaler Contractor Architect The information contained in this document is subject to change without notice.

SLNSS-FV/RYL110-111 – Rev. 2 (06/13) © 2013 SLOAN VALVE COMPANY

SLOAN HEADQUARTERS • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131 Ph: 1-800-982-5839 • Fax: 1-800-447-8329 • www.sloanvalve.com

Dual-Flush Side Mount

Dual-Flush Side Mount Description Battery-Powered, Sensor-Activated, Dual-Flush Retrofit Conversion Kit for Exposed Closet Flushometers.

Model £ EBV-550-A Dual-Flush Side Mount Unit Code No. 3325501

Specifications Quiet, Exposed, Optima Plus®, Battery Powered, Sensor-Activated, Dual-Flush (sold separately) Retrofit Conversion Kits for Exposed Closet Sloan flushometers with the following features: • ADA Compliant Optima Plus® Battery Powered Infrared Side Mount Sensor for automatic “No Hands” operation • Chrome Plated Infrared Sensor Housing • Non-Hold-Open True Mechanical Override Full Flush Button • If the user is present for less than one minute and leaves the sensing zone or chooses the small GREEN override button, a reduced flush initiates (1.1 gpf/4.2 Lpf) eliminating liquid and paper waste, saving 1/2 gallon of water† • If the user is present for greater than one minute and leaves the zone or chooses the large BLACK override button, the full flush initiates (1.6 gpf/6.0 Lpf) eliminating solid waste and paper • Reduces water volume by up to 30% when a reduced flush occurs† • Initial Set-up Range Indicator Light (first 10 minutes) • User friendly three (3) second Flush Delay • Four (4) Size C Batteries included • “Low Battery” Flashing LED • “User in View” Flashing LED • Can be installed when handle is on left side or right side of valve • Installation Tools provided • No External Volume Adjustment to Ensure Water Conservation The Side Mount units can be used on standard rough-in Sloan, Royal, Regal and Zurn flushometers.

Fixtures Consult Sloan for Sloan brand matching fixture options. †

30% water savings assumes retrofit to an existing 1.6 gpf closet flushometer.

Water savings when used with other flush volumes may vary.

Side Mount units do NOT include the flushometer

Smart Sense Technology™ Sloan® DFSM flushometers are equipped with Smart Sense Technology™, which applies extended range and logic techniques to significantly reduce water usage. The DFSM flushometer automatically delivers a reduced flush when users are present less than 60 seconds. Please contact Sloan for specific details.

Automatic Operation Sloan’s DFSM flushometers are activated via multi-lobular infrared sensor By detecting user presence and duration, the DFSM unit will determine the proper flush volume for unequalled water efficiency.

Manual Operation Sloan’s electronic Dual-Flush Side Mount (DFSM) flushometers incorporate intuitive split-button design for easy manual activation. Assuming a 1.6 gpf diaphragm kit, the small GREEN button controls the reduced flush cycle (1.1 gpf/4.2 Lpf), the large BLACK button controls the full flush cycle (1.6 gpf/6.0 Lpf). Straightforward graphics alert user to proper activation. Reduced flush for liquid waste, full flush for solid waste.

Hygienic Touchless, sensor activation eliminates the need for user contact to help control the spread of infectious diseases. The Sloan DFSM Electronic Retrofit Units are provided with Reduced or Full Flush Override Buttons to allow a “courtesy flush” for individual user comfort. The 72-Hour Sentinel Flush keeps fixture fresh during periods of nonuse.

Warranty 3 year (limited)

This space for Architect/Engineer approval Job Name

Date

Model Specified

Quantity

Variations Specified Customer/Wholesaler Contractor Architect

EBV-550-A 08-13

The information contained in this document is subject to change without notice.

Dual-Flush Side Mount Description Battery-Powered, Sensor-Activated, Dual-Flush Retrofit Conversion Kit for Exposed Closet Flushometers.

Model

SIDE MOUNT COMPONENTS

£ EBV-550-A Dual-Flush Side Mount Unit Code No. 3325501

ELECTRICAL SPECIFICATIONS Control Circuit Solid State 6 VDC Input 72 Hour Sentinel Flush Closet Range: 2-3 Second Arming Delay

Battery Type (4) Size C Alkaline

SIDE MOUNT

SLEEVE ASSEMBLY

EXISTING FLUSHOMETER

Battery Life 3 Years @ 3,000 Flushes/Month

DFSM Sensor Type Infrared Convergence Type Object Lock Detection

Indicator Lights User in View/Low Battery

COUPLING WRENCH

Valve Operating Pressure (Flowing) 25-80 psi (172-552 kPa)

DFSM Sensor Range Factory Set at 22” - 42” (559 mm-1067 mm)

HEX WRENCH

OPERATION 1. A continuous, invisible light beam is emitted from the object lock infrared sensor.

2. As the user enters the beam’s effective range, 22” - 42” (559 mm to 1067 mm), the beam is reflected into the scanner window to activate the output circuit. Once activated, the output circuit continues in a “hold” mode for as long as the user remains within the effective range of the sensor. If the user stays less than 60 seconds, a reduced flush will automatically initiate when the user leaves.

3. When the user steps away from the infrared sensor, the circuit initiates the flushing cycle to flush the fixture. The circuit then automatically resets and is ready for the next user.

If the user stays longer than 60 seconds, a full flush will automatically initiate when the user leaves.

ROUGH-IN EBV-550-A Dual-Flush Side Mount unit shown on an existing Royal Model 110/111 Closet Flushometer 7” (178 mm)

6” (131 mm)

2 3/4” (70 mm)

6” (150 mm) 5” (131 mm) SENSOR WINDOW

6” (150 mm) 5” (131 mm) SENSOR WINDOW

SLOAN HEADQUARTERS • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131 Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com

© 2013 Sloan Valve Company

EBV-550-A 08-13

the innovative brand since 1991

SONORA™ MODEL # 2004

WATERLESS URINAL

DESCRIPTION Waterless Co. Inc. No-Flush™ urinal Model #2004 Sonora™, wall hung, made of High Performance Composite material (HPC) for commercial or home use. Urinal to have elongated rim, a full 2” interior drain and 2” flanged waste outlet; suitable for direct connection to a 2” waste at the wall . Supplied EcoTrap® insert required. Trap insert to be of a vertical flow type with 360 degree perimeter openings and installed by press fit. Trap must be replaceable and refillable. Trap inserts are to be removed with a two pronged heavy duty stainless steel tool. Urinal to be fastened at the bottom front using standard bolts from brass urinal flange. The bottom of the urinal is to be fully enclosed.

SONORATM Model # 2004 DIMENSIONS ( WxH xD) APPROX. WEIGHT 18.0 x 28.0 x 14.0 inches (457 x 711 x 356 mm) 22 lbs ( 20.5 kg ) 457 MM (18.0")

346 MM (14.0")

133 MM 133 MM (5.25") (5.25")

597 MM (24.0") 572 MM (22.5")

711 MM (28.0")

APPLICATION • Home or Commercial FURNISHED WITH • Two unit integrated wall hangers • AllFlange™ slots for flange bolts • Fastening hardware • Gasket • Two EcoTraps®, vertical trap design Note: Adequate BlueSeal® trap liquid to be provided for EcoTrap® of urinal, not furnished.

ADA 381 MM 203 MM (15.0") (8.0") TO FLOOR TO FLOOR

MIN. 102 MM MAX. 185 MM (MIN. 4.0") (MAX. 7.3")

25MM (1.0") 89 MM (3.5")

ADA 610 MM 432 MM (24.0") (17.0") TO FLOOR TO FLOOR

CODES/STANDARDS APPLICABLE: Complies w/ A117, ASME A112.19.19, Z124.9 others.

FOR STANDARD INSTALLATION: mount at 24” above finished floor to lip of urinal or as required by architect. Center drain line to be at 15.0” off finished floor.

COLORS Standard white; other colors available

FOR ADA REQUIREMENTS: mount at 17“ above finished floor to lip of urinal. ADA center drain line to be at 8.0” off finished floor.

WARRANTY 3 Year Limited Warranty.

Supply owner with warranty card

Supply suitable wall support, i.e. carrier. Install and maintain as per manufacturer’s instructions. Urinal 2” drain outlet installs and drains to 2” flanged waste. Retrofit or new construction. Use standard sanitation practices to maintain fixture.

WATERLESS CO. INC. 800.244.6364

NOTE:

In keeping with our policy of product improvement, Waterless Co. reserves the right to change product specifications at any time without notice. It is the responsibility of the specifier, installer and wholesale seller to confirm specification at time of sale or installation. No responsibility is assumed, claimed or accepted by Waterless Co. Inc.

Urinal is predrilled to accept most 2” brass flanges from other manufacturer’s urinals in a retrofit scenario. For new construction, specify #5001 brass urinal flange for 2” waste. On site custodial training is to be provided by the manufacturer or their representative.

Certificates of training are to be issued and forwarded to the owner. Specify made in USA or Mexico. © WATERLESS CO. INC. 10/2011

051311

229 MM (9.0")

WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM

manual FLUSH valve

BARRIER FREE

WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM

❏ 6590.503 0.125 gpf Exposed Top Spud Urinal and Manual Piston-Type Urinal Flush Valve

URINAL: • Vitreous china • Ultra High Efficiency. Operates in the range of 0.125 gpf to 1.0 gpf (0.5 Lpf to 3.8 Lpf) • Flushing rim • Elongated 14" rim from finished wall • Washout flush action • Extended sides for privacy • 3/4" inlet spud • Outlet connection threaded 2" inside (NPTF) • Strainer included • Meets ASME flush requirements at 0.125 to 1.0 gpf • Model 6590.001 top spud MANUAL FLUSH VALVE: • Self-cleaning brass piston with integral wiper spring prevents clogging and reduces maintenance • Piston operation delivers superior flush accuracy and repeatability • Piston valve remains closed and does not need to be reset after loss of water pressure • Non-hold open handle • Positive seal ensures leak-free performance • No external volume adjustment • Durable chrome-plated cast brass construction is ideal for commercial applications • Chloramine-resistant EPDM seals • Adjustable tailpiece for rough-in flexibility • Can be installed left or right hand • Model 6045.013 for 3/4" top spud urinals, 0.125 gpf

Includes: • 2 Wall hangers • 3/4" I.P.S. angle stop with back-flow protection and vandal-resistant cap • Sweat solder kit including cover tube and wall flange • High back pressure vacuum breaker with down tube • Spud coupling and flange for 3/4" top spud

SEE REVERSE FOR ROUGHING-IN DIMENSIONS

High-Efficiency Urinal Systems: • 87.5% water savings when compared to a 1.0 gpf urinal system Operating Pressure: Overall Range: 20-125 psi** Recommended: 20 psi (flowing)-80 psi (static) ** Water pressure over 80 psi is not recommended for most plumbing fixtures.

Flow Requirement: 10 gpm (37.9 L/min.)

Nominal Fixture Dimensions: 360 x 480 x 664mm (14-1/8" x 18-7/8" x 26-1/8")

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. When installed so top of rim is 387mm (15-1/4") from finished floor.

© 2014 AS America Inc.

N17

Rev. 6/14

WASHBROOK® FloWise® 0.125 GPF ULTRA HIGH EFFICIENCY URINAL SYSTEM

manual FLUSH valve

BARRIER FREE FINISHED WALL

SUPPLY DN 20mm (3/4" I.P.S.)

64mm (2-1/2")

108mm-133mm (4-1/4" to 5-1/4")

ROUGH-IN DIMENSION 295mm (11-1/2")

-C-L-

*CRITICAL LEVEL

-C-L-

343mm (13-1/2")

K2 HANGERS 8mm X 25mm (5/16" X 1") SLOT 343mm (13-1/2") 480mm (18-7/8")

438mm (17-1/4")

235mm (9-1/4")

464mm (18-1/4")

664mm (26-1/8") REF.

360mm (14-1/8") 13mm (1/2") 83mm (3-1/4")

102mm (4")

C/L OF OUTLET

387mm (15-1/4") MAX 610mm (24") OPTIONAL

2" N.P.T. FEMALE OUTLET CONNECTION

FINISHED FLOOR

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 6" (152mm) above fixture.

Consult Codes for details.

13mm (1/2")

13mm (1/2") FINISHED WALL

VALVE LEFT or RIGHT HAND INSTALLATION

GASKET

102mm (4") 2" N.P.T. INSIDE THREADS

DETAIL OF OUTLET CONNECTION

Fixture Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures

NOTES: PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Valve Listings: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant

© 2014 AS America Inc.

N18

Rev. 6/14

WASHBROOK® FloWise® UNIVERSAL URINAL VITREOUS CHINA

BARRIER FREE

WASHBROOK® FloWise ® UNIVERSAL URINAL • Vitreous china • Ultra High Efficiency, Low Consumption. Operates in the range of 0.125gpf to 1.0gpf (0.5 Lpf to 3.8 Lpf) • Flushing rim • Elongated 14" rim from finished wall • Washout flush action • Extended sides for privacy • 3/4" inlet spud • Outlet connection threaded 2" inside (NPTF) • 2 wall hangers • Fixture only • Strainer included • Meets ASME flush requirements at 0.125 to 1.0 gpf

❏ 6590.001 Universal Top spud ❏ 6515.001 Universal Back spud Nominal Dimensions: 360 x 480 x 664mm (14-1/8" x 18-7/8" x 26-1/8") SEE REVERSE FOR ROUGHING-IN DIMENSIONS

Recommended working pressure – between 20 psi at valve when flushing and 80 psi static Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures

To Be Specified: ❏ Color: ❏ White ❏ Flush Valve:

1.0 gpf Flush Valve: Sensor-Operated:

❏ American Standard Selectronic ® #6063.101.002 DC Power (Top Spud)

❏ American Standard Selectronic ® #6062.310.007 AC Power (Back Spud) 1.0 gpf Flush Valve: Manual-Operated:

❏A merican Standard # 6045.101.002 0.5 gpf Flush Valve: Sensor-Operated:

❏A merican Standard Selectronic ® #6063.051.002 DC Power (Top Spud)

❏ American Standard Selectronic ® #6062.305.007 AC Power (Back Spud) 0.5 gpf Flush Valve: Manual-Operated:

❏A merican Standard #6045.051.002 0.125 gpf Flush Valve: Sensor-Operated:

❏ American Standard Selectronic ® #6063.013.002 DC Power (Top Spud)

❏ American Standard Selectronic ® #6062.301.007 AC Power (Back Spud)

When used with 0.125 gpf or 0.5 gpf urinal flush valves

© 2013 AS America Inc.

0.125 gpf Flush Valve: Manual-Operated:

❏ American Standard #6045.013.002

M105 Revised 6/13

WASHBROOK® FloWise® UNIVERSAL URINAL VITREOUS CHINA

BARRIER FREE

6590.001 TOP SPUD 121mm (4-3/4")

292mm (11-1/2")

3/4" SPUD

3/4" S.P.S. OR 3/4" C.W.T. SUPPLY TO FLUSH VALVE

FINISHED WALL

64mm (2-1/2")

K2 HANGERS 8mm X 25mm (5/16" X 1") SLOT

343mm (13-1/2") 480mm (18-7/8")

438mm (17-1/4")

235mm (9-1/4")

464mm (18-1/4")

664mm (26-1/8") REF.

6515.001 BACK SPUD

360mm (14-1/8") 13mm (1/2") 83mm (3-1/4")

102mm (4")

C/L OF OUTLET

387mm (15-1/4") MAX 610mm (24") OPTIONAL

51mm (2")

FINISHED WALL

K2 HANGERS 8mm X 25mm (5/16" X 1") SLOT

2" N.P.T. FEMALE OUTLET CONNECTION

3/4" SPUD

343mm (13-1/2")

FINISHED FLOOR 13mm (1/2")

480mm (18-7/8")

438mm (17-1/4")

GASKET

464mm (18-1/4")

664mm (26-1/8") REF.

13mm (1/2") FINISHED WALL

51mm (2")

235mm (9-1/4")

360mm (14-1/8") 13mm (1/2")

102mm (4") 2" N.P.T. INSIDE THREADS

83mm (3-1/4")

DETAIL OF OUTLET CONNECTION

102mm (4")

C/L OF OUTLET

387mm (15-1/4") MAX 610mm (24") OPTIONAL

2" N.P.T. FEMALE OUTLET CONNECTION

FINISHED FLOOR 13mm (1/2")

13mm (1/2") FINISHED WALL

GASKET

102mm (4") 2" N.P.T. INSIDE THREADS

DETAIL OF OUTLET CONNECTION

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. When installed so top of rim is 387mm (15-1/4") from finished floor.

NOTES: FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

© 2013 AS America Inc.

M106

Revised 6/13

SELECTRONIC™ FloWise® URINAL FLUSH VALVE

BATTERY POWERED, SENSOR OPERATED,0.125 GPF MODEL NUMBER:

❑ 6063.013.002 Flush Valve for 3/4" top spud urinals, 0.125 gpf.

❑ 6063.513.002 Retrofit for Existing Flush Valves, 0.125 gpf. Replaces industry standard manual and electronic valves. Does not include the vacuum breaker assembly, angle stop or sweat solder kit.

OPERATING PRESSURE: Overall Range: 20-125 psi** Recommended: 20 psi (Flowing)-80 psi (static)

GENERAL DESCRIPTION: Exposed, Battery Powered, Sensor Operated Selectronic™ Urinal Flush Valve for 3/4" top spud urinals.

Inlet includes 3/4" I.P.S. angle stop with back-flow protection, vandal-resistant cap, sweat solder kit, cover tube and wall flange.

Outlet includes 3/4" vacuum breaker with adjustable tailpiece, spud coupling and flange.

FLOW REQUIREMENT: 8 gpm (30.3 L/min.) ** Water pressure over 80 psi is not recommended for most plumbing fixtures.

BATTERY LIFE: 200,000 cycles (4 years @ 4000 cycles per month)

PRODUCT FEATURES: • Exclusive Pressure Compensation feature allows the flush valve to deliver a constant flush volume regardless of water pressure.

• Flush Valve can not be adjusted to deliver more or less water, ensuring water savings & performance.

• Electronic flush valve with Selectronic™ proximity system for "Hands Free" operation.

• Self-Cleaning Piston with integral wiper spring prevents clogging and reduces maintenance.

• Piston operation delivers superior flush accuracy and repeatability.

• Fully Mechanical Manual Override Button can operate for an unlimited time without power.

• Valve remains closed and does not need to be reset after loss of power or water pressure.

• Sanitary Flush: Valve automatically flushes after 24 hours of non-use to clean fixture & maintain trap seal.

• Stadium Feature: Valve automatically switches to water savings mode during periods of high usage.

• Sensor & electronic controls are fully encloses and water resistant.

• Range can be adjusted manually or with optional remote control.

• Chemical resistant EPDM seals are unaffected by chloramines & other chemicals.

• Adjustable tailpiece.

• Factory-installed CR-P2 lithium battery included.

• No external volume adjustment.

• Can be installed left or right handed.

ACCESSORIES: • Cast wall flange (3/4")

3/4" S.P.S. OR 3/4" C.W.T. SUPPLY TO FLUSH VALVE 115mm-134mm (4-1/2" TO 5-1/4")

57mm (2-1/4" MIN.)

292mm (11-1/2") FOR 3/4" TOP SPUD FIXTURES

-C-L-

CRITICAL LEVEL 165mm (6-1/2")

FINISHED WALL

FINISHED FLOOR

RECOMMENDED SPECIFICATION:

Electronic proximity infrared sensor activated urinal flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Includes a fully mechanical manual over-ride that can provide a complete flush without battery power. Includes cast brass valve body and metal cover with chrome finish, vandal resistant stop cap and lithium battery. Angle stop with back-flow protection and vacuum breaker included. 0.13 gpf / 0.5 Lpf Flush valve shall be American Standard Model # 6063._13.002. © 2013 AS America Inc.

L239

Revised 6/13

SELECTRONIC™ FloWise® URINAL FLUSH VALVE

BATTERY POWERED, SENSOR OPERATED, 0.125 GPF LISTINGS: • ASSE 1037 • ANSI/ASME A112.19.2 • ADA Compliant DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2")

Roughing-in Dimensions 72mm (2-7/8")

FINISHED WALL 57mm (2-1/4" MIN.) 15˚

116mm (4-5/8")

MANUAL OVERRIDE BUTTON

SUPPLY DN 25mm ( 3/4" I.P.S.)

*CRITICAL LEVEL -C-L-

115mm-134mm (4-1/2" TO 5-1/4")

409mm (16-1/8")

116mm (6-1/2") 293mm (11-1/2") FOR 3/4" TOP SPUD FIXTURES

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6 " (152mm) above fixture. Consult Codes for details.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES

© 2013 AS America Inc.

Right or Left Hand Installation

L240

Revised 6/13

Chesapeake™ Wall-Mount Bathroom Sink K-1721 Features

• • • • • •

Made from premium materials that withstand high-volume usage Constructed of vitreous china 20"L x 18-1/4"W Wall-mount installation Faucet not included Ledge-back

Recommended Accessories K-8998 P-Trap

Components Additional included component/s: Hanger (2 Required).

Codes/Standards ASME A112.19.2/CSA B45.1 ADA ICC/ANSI A117.1 See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

Color

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 2-18-2015 02:09

Code Description 0

White

96

Biscuit

47

Almond

Chesapeake™ Wall-Mount Bathroom Sink K-1721

13-3/4"

Technical Information All product dimensions are nominal.

Bowl configuration: Single Installation: Wall-mount Bowl area (Only) Length: 14" (356 mm) Width: 12" (305 mm) Water depth: 4-7/8" (124 mm) Number of deck holes: 1 Faucet hole(s): 1-3/8" (35 mm) Soap/Lotion hole: 1-1/4" (32 mm) Drain hole: 1-3/4" (44 mm)

USA/Canada: 1-800-4KOHLER (1-800-456-4537) www.kohler.com 2-18-2015 02:09

Notes Install this product according to the installation guide.

ADA compliant when installed to the specific requirements of these regulations.

SELECTRONIC™ INTEGRATED ELECTRONIC PROXIMITY LAVATORY FAUCET MODEL NUMBER: DC POWERED; single inlet 7055.105 with cast brass spout, 0.5 GPM pressure compensating, vandal-resistant non-aerated spray. Battery included.

7055.115 with cast brass spout, 1.5 GPM pressure compensating, vandal-resistant nonaerated laminar flow. Battery included.

PLUG-IN AC POWERED; single inlet 7056.105 with cast brass spout, 0.5 GPM pressure compensating, vandal-resistant nonaerated spray. Includes Plug-In AC power supply.

GENERAL DESCRIPTION: Electronic, sensor-operated faucet with proximity operation.

Integrated design with sensor, solenoid valve & electronic controls fully enclosed in the spout. Vandal-resistant cast brass construction with single-post mounting. Operates on DC (battery) or AC permanent power. Water pressure range from 20 to 125 psi. Single inlet to spout: 18" flexible stainless steel hose with check valve, filter screen & 3/8" compression fitting.

7056.115 with cast brass spout, 1.5 GPM pressure compensating, vandal-resistant nonaerated laminar flow. Includes Plug-In AC power supply.

HARD-WIRED AC POWERED; single inlet 7059.105 with cast brass spout, 0.5 GPM pressure compensating, vandal-resistant nonaerated spray. Includes UL-approved Hard-Wired AC transformer.

PRODUCT FEATURES: Easy Installation: Simple integrated design; sensor, solenoid valve and all electronics are enclosed in the spout.

No control box below deck.

7059.115 with cast brass spout, 1.5 GPM pressure compensating, vandal-resistant nonaerated laminar flow. Includes UL-approved HardWired AC transformer.

Single Inlet: For cold or tempered water. Inlet hose includes a strainer to protect solenoid.

Power Options:

MULTI-AC POWERED; single inlet 7057.105 with cast brass spout, 0.5 GPM pressure compensating, vandal-resistant nonaerated spray. One power supply or transformer (sold separately) can operate up to 15 faucets and/or flush valves. 10' extension cable and Y-connector included.

• Battery - Includes CR-P2 lithium battery. Battery LifeApproximately 200,000 cycles (4 years @ 4,000 cycles per month).

• Plug-In AC - Includes universal low voltage plug-in power supply with 6 foot long cord. Inlet Voltage: 80 - 250 VAC, 50 60 Hz. Outlet Voltage: 6 VDC. One power supply can run up to 15 faucets and/or flush valves at one time.

7057.115 with cast brass spout, 1.5 GPM pressure compensating, vandal-resistant non-aerated laminar flow. One power supply or transformer (sold separately) can operate up to 15 faucets and/or flush valves. 10' extension cable and Y-connector included.

• Hard-Wired AC - Includes universal low voltage hard-wired transformer. Inlet Voltage: 80 - 250 VAC, 50 - 60 Hz. Outlet Voltage: 6 VDC. One transformer can run up to 15 faucets and/or flush valves at one time.

Seamless Cast Brass Body: Easy to clean.

Vandal-resistant. Ideal for high-use commercial applications.

OPTIONAL 4" DECK PLATE 705P.400 4" brass deck plate with 1/4" fixation studs and quick spin nuts. Includes fixation pin that prevents the faucet spout from rotating. Only for use on Selectronic Integrated Faucets (705x series).

Flexible Mounting: Single post mounting with optional 4" deck plate.

Safety Timer: Helps prevent vandalism by turning off the faucet if the sensor is covered for more than 1 minute.

Lead Free: Faucet contains ≤ 0.25% total lead content by weighted average.

OPTIONAL MIXING VALVE 605XTMV or 605XTMV1070 Thermostatic mixing valve, 20" flex hoses, 3/8" compression fittings

RECOMMENDED SPECIFICATION Electronic sensor-operated faucet shall feature vandal-resistant cast brass body with single inlet, check valve & filter screen. Single post mounting. Features integrated design with the sensor, solenoid valve and all electronics enclosed in the spout. Fitting shall be American Standard Model # 705_.1_5.

L7 © 2013 AS America Inc.

3/13

SELECTRONIC™ INTEGRATED ELECTRONIC PROXIMITY LAVATORY FAUCET

CODES AND STANDARDS These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9, Annex G MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES

Other Aerators Available: Part Suffix V035**

Description 0.35 gpm (1.3 Lpm) PCA Vandal-Resistant Non-Aerated Spray

*PCA - Pressure Compensating **Meets Cal Green Code FINISHED WALL OR BACKSPLASH MIN. 1" CLEARANCE 191mm (7-1/2")

191mm (7-1/2") 165mm (6-1/2")

140mm (5-1/2") MOUNTING SURFACE

66mm ( 2-5/8")

38mm (1-1/2")

32mm (1-1/4")

457mm (18")

3/8" COMPRESSION CONNECTOR

L8 © 2013 AS America Inc.

3/13

Endura II™ Tubular Wall-Mount Barrier-Free Fountain

MODEL 4405

This fountain is certified to NSF/ANSI 61.

GENERAL Wall-mounted, Endura II™ Steel fountain with textured powder-coat finish and E-coat immersion for year-round beauty with minimum maintenance. The E-coat immersion process coats the outside and inside of the fountain for the ultimate in corrosion protection. Contourformed stainless steel basin with rounded corners and edges reduces splatter, insures proper drainage and prevents standing waste water. Designed to be easily accessible to both physically challenged and able-bodied individuals. Ideally suited for installation in public areas. Model meets state and federal requirements as defined by the Americans with Disabilities Act. BUBBLER Vandal-resistant bubbler is one-piece, chrome-plated. Unit has integral hood guard designed to prevent contamination from other users, airborne deposits and tampering.

Standard Finish is Evergreen Textured powder-coat Endura II™ Each 4405 consists of 1 carton of the following: Fountain Trap and service stop not included.

Shipping weight: 41 lbs.

PUSHBUTTON ACTUATION MECHANISM Self closing, vandal-resistant pushbutton does not require grasping or twisting.

AUTOMATIC STREAM HEIGHT REGULATOR Self-closing assembly is located inside unit to prevent tampering. Unit resists corrosion and liming. A constant stream height is automatically maintained under line pressures that vary from 20 to 105 psi.

INLET STRAINER Easily cleaned in-line strainer screen traps particles of 140 microns or larger before they enter the waterway.

WATER INLET 3/8" O.D. Tubing DRAIN OUTLET 1-1/4" tube outlet for 1-1/4" slip joint connection.

SUGGESTED SPECIFICATIONS Fountain shall include pushbutton on the front.

Shall include contour-formed basin to eliminate splashing and standing water, and shall have rounded corners and edges. Projector shall be chrome-plated vandal-resistant type with integral hood guard and anti-squirt feature. Fountain shall comply with ANSI 117:1 and ADA for visual and motion disabilities. The manufacturer shall certify the unit to meet the requirements of NSF/ANSI 61, and the Safe Drinking Water Act. Note: Continued product improvement makes specifications subject to change without notice.

See Halsey Taylor website for most current spec sheet.

JOB NAME:

ENGINEER/CONTRACTOR NAME:

APPROVAL: DATE:

halseytaylor.com HALSEY TAYLOR, 2222 CAMDEN COURT, OAK BROOK, ILLINOIS 60523

B21 / 6-2008

4405

Barrier-Free Endura II™ Tubular Wall-Mount Fountain (CONTINUED)

MOUNTING INSTRUCTIONS Refer to diagrams for rough-in of plumbing.

This fountain is to be mounted on a smooth, flat finished wall surface with adequate support structure. NOTE: Wall mounting structure must be capable of support 300 lb. load on fountain.

Water service line and waste line are to be assembled as required. Final check for leaks and correct functions of fountain should be made. (For details see the installation instructions.)

TOP VIEW

Installation requires trap to be installed in wall. A service supply stop must be installed at the fountain inlet line. Trap and service stop not included.

CAUTION — Fountain must be securely bolted to wall.

OPERATING PRESSURES: Supply water - 105 psi maximum NOTE: For wall support required locations see installation instructions provided with fountain.

BACK VIEW

SIDE VIEW

LEGEND: A = 3/8" O.D. UNPLATED COPPER TUBE CONNECT SHUT OFF VALVE BY OTHERS B = REMOVABLE BOTTOM COVER

1-1/4" Trap not provided. *ADA Requirement

Printed in the U.S.A.

KOALA KARE PRODUCTS KB200 HORIZONTAL WALL MOUNTED BABY CHANGING STATION KB200-00 CREAM KB200-01 GREY KB200-05 WHITE GRANITE KB200-11 EARTH

3¾” (95 mm) 16” (406 mm) between holes

19 11/16” (500 mm)

18 5/32” (461 mm)

42¼” (1,073 mm) to floor

353/16” (894 mm)

Floor

KB200 TECHNICAL DATA SHEET

19 11/16” (489 mm) liner dispenser dimensions when attached

16” (406 mm)

5½” (140 mm) 4½” (114 mm)

42¼” (1073 mm) from top mounting hole to floor

3¾” (95 mm)

Floor

35 3/16” (894 mm)

22¼” (565 mm)

44” (1118 mm) from floor to handle area located on both sides of unit.

33” (838 mm) 28¾” (730 mm) from bottom of closed bed to floor

to changing surface

29¼” (743 mm)

23 3/16” (589 mm)

from bottom of bed to floor

Floor

MATERIALS: FDA approved injection-molded polypropylene with Microban® antimicrobial additive embedded into the bed surface. Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is 450 sq. in (2903 sq. cm) and comes complete with nylon safety strap and bag hooks.

Dual cavity liner dispenser holds approximately 50 KB150-99 bed liners.

OPERATION: Concealed pneumatic cylinder and metal mounting chassis provides controlled, slow opening and closing of bed. Polypropylene is easy to clean and resists odors and bacterial growth.

Complies with ASTM static load performance requirements when properly installed.

Warning: To ensure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturer’s instructions.

SPECIFICATION: Baby changing station body shall be durable, injection-molded polypropylene. Design of unit shall be surface-mounted. Unit shall be equipped with a pneumatic cylinder for controlled opening and closing of bed. Bed shall be secured to metal mounting chassis with a concealed steel-on-steel hinge. No hinge structure shall be exposed on interior or exterior surfaces. Unit shall have mounting hardware included. Unit shall have Microban® antimicrobial embedded into plastic material on the changing surface. Unit shall comply with ADA regulations when properly installed. Bed shall have smooth concave changing area with a nylon safety strap and two hooks for bags or purses. The design and manufacture of Koala products Is intended to be compliant with the 2010 ADA Standards for Accessible Design and the 2009 ICC A117.1, Accessible and Usable Buildings and Facilities. Unit shall conform to ASTM F 2285-04 Standard Safety Performance Specification for Diaper Changing Tables for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, EN 12221:2008, ASTM G22 Antibacterial standards or local code if more stringent installation requirements are applicable for Barrier-Free accessibility.

Unit shall have a built-in Liner Dispenser for use with 3-ply chemical free biodegradable bed liners, instructional graphics and safety messages in 4 languages. Optional Braille label is available. Unit shall be backed by manufacturer’s 5-year limited warranty on materials and workmanship and include a provision for replacement caused by vandalism. Unit shall be manufactured in the U.S.A.

INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed. Installer should account for the space that a unit occupies when in the down position and with the caregiver (whether standing or seated) in front of the unit. Locate the unit so that paths of travel are maintained around it when being used.

Drilling holes and mounting the station:

1. Remove changing station from the shipping container and check for any freight damage.

If damage is found, please call Koala Kare Products’ Customer Service at 888.733.3456. Remove “Installation Kit” and “Operator Kit” from box. Please give “Operator Kit” to facility manager or operator. Box should contain two pieces: the bed and metal mounting chassis and the wall mount liner dispenser. Identify the best location for installing the unit.

2. Standard Installation- Remove the bed and chassis from the box and select the wall area where the unit will be installed. Make sure you have taken into consideration the operating clearance of 9½” (241 mm) on both sides of the exposed chassis and 23 3/16” (589 mm) from wall surface when open. Measure from the floor 42¼” (1073 mm) on stud center and mark the wall.

The mounting holes are designed for 16” stud centers. Ensure the locations you have marked for the mounting holes are level before drilling. Drill pilot holes for keyhole mounting using a 1/8” regular drill bit.

Masonry or Tile over Stud Wall- Use a 7/32” (6 mm) masonry drill bit for the pilot hole until you hit the stud. Change bit to 1/8” (3 mm) regular drill bit.

Metal Stud or Concrete Block- If the wall has wood studs that are not on 16” (406 mm) centers, has metal studs or an underlying surface of concrete block, drill with a ½” (13 mm) masonry bit. (You may have to purchase toggles before installing.) You must allow a minimum of inside wall space for toggles to turn depending on toggles used. Insert and tighten toggles.

3. Screw two of the mounting screws into the pilot holes leaving ¼” (6 mm) exposed to allow keyhole slots to be easily mounted over the screw heads. Place chassis over screws. After securing the unit using the keyhole slots, verify that the unit is level. Tighten top two screws so that they are flush with the wall. Use the four lower holes as a guide to mark and drill pilot holes.

Use remaining four screws and four washers to complete installation of bed and metal mounting bracket. Insert washers over lower four screws. All SIX screws and four washers must be mounted to the chassis.

4. Ensure liner dispenser is free from damage. Remove key, unlock, and open liner dispenser lid. This will expose liner dispenser mounting holes. Line up dispenser mounting holes onto chassis and secure with the four screws provided. Close and lock the liner dispenser door.

5. Clean work area and inspect unit to ensure it opens and closes smoothly. Give Operator Kit and key to the facility operator. Replacement parts and additional liners can be purchased from your local distributor or by calling Koala at 888.733.3456 or 303.539.8300.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice.

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399 www.koalabear.com P/N AB005 April 2012

KOALA KARE PRODUCTS KB208 OVAL WALL MOUNTED BABY CHANGING STATION KB208-01 GREY KB208-12 GREY GRANITE KB208-14 SANDSTONE

4” (102 mm)

16” (406 mm)

F i n i s h f ace of w a l l

4¾” (121 mm)

11” (279 mm)

21” (533 mm) 47” (1,194 mm) 34” (864 mm)

32” (813 mm)

Floor

®

KB208 TECHNICAL DATA SHEET

21” (533 mm)

MATERIALS: FDA approved rotationally-molded high-density polyethylene with Microban® antimicrobial. Reinforced full-length steel pivot rod secured in a metal tube hinge mechanism and mounting hardware included. Safety messages in four languages.

Contoured changing surface area is 308 sq in. (1987 sq cm) and comes complete with nylon safety straps and bag hooks.

OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene is easy to clean and resists odors and bacterial growth. Complies with ASTM static load performance requirements when properly installed.

Warning: To ensure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturer’s instructions.

SPECIFICATION: Baby changing station body shall be durable, high-density polyethylene. Design of unit shall be surface-mounted, oval. Unit shall be equipped with a pneumatic cylinder for controlled opening and closing of bed. Bed shall be secured to back with a reinforced full-length steel pivot rod secured in a metal tube hinge. Unit shall have Microban® antimicrobial embedded into plastic material. No hinge structure shall be exposed on interior or exterior surfaces. Unit shall conform to ICC A117.1-2009 Accessible and Usable Buildings and Facilities, ASTM F 2285-04 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use, ANSI Z535.4 Product Safety Signs and Labels, and ASTM G21 Antifungal Standards or local code if more stringent installation requirements are applicable for Barrier-free accessibility. Unit shall comply with ADA regulations when properly installed. Bed shall have smooth concave changing area with a nylon safety strap and two hooks for bags or purses. Unit shall be backed by manufacturer’s 5-year limited warranty on materials and workmanship and include a provision for replacement caused by vandalism. Unit shall be manufactured in the U.S.A.

INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight, and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed.

1. Remove the station from the shipping container and check for any freight damage.

Identify the best location for installing the unit. Hold the unit in place and open the bed.

Make sure you have taken the operating clearance into consideration.

2. Determine the best method of mounting based on the type of wall. You may have to purchase toggles.

3. The oval unit has four mounting holes provided in the back wall, positioned on a 16” (406 mm) stud center. If possible, locate the wood or metal studs for fastening the unit in the desired location. If the walls do not have studs on 16” center as outlined, make sure at least one side of the unit is installed into the stud. Use toggles for holes on the opposite side.

4. Find the stud where you will be attaching the left side of the unit to the wall.

Measure up from the floor 42¼” (1,073 mm), at the center of the stud, and mark the wall. Mark remaining holes using a measuring tape to make sure the holes are precisely positioned. Hold unit in place to verify. Use a 1/8” drill bit to make pilot holes then use four ¼” x 3” panhead wood screws with washers (supplied) to secure the unit to the studs.

If the wall surface is masonry or tile over studs, use a 7/32” masonry drill bit for the pilot hole until you hit the stud. Change bit to 1/8” regular drill bit. Use four ¼” x 3” panhead wood screws with washers (supplied).

If the wall has wood studs that are not on 16” (406 mm) centers, has metal studs or an underlying surface of concrete block, drill with a ½” masonry bit. (You may have to purchase toggles before installing.) You must allow a minimum of inside wall space for toggles to turn, depending on toggles used. Insert and tighten toggles.

5. Once the unit has been secured to the wall, use the two screw hole plugs provided to cap the upper two mounting hole recesses. Position the plug over the recess and push it into place using hand pressure. Do not hammer the plug in as it will damage the plug. Once the plug is flush with the surface stop pushing and install the second one.

6. Position Koala sign (supplied) on the outside of the restroom door. Replacement parts can be purchased from your local distributor or by calling toll free 888.733.3456 or 303.539.8300.

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions without notice.

Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399 www.koalabear.com KB208 TDS August 2013

eXtremeAir gXt & eXt HAND DRYER SPECIFICATIONS ®

COMPACT.HIGH SPEED.ENERGY EFFICIENT PLUS NEW STANDARD FEATURES

+ Adjustable sound and speed

New patent-pending technology allows the hand dryer to be adjusted to your preference - providing the perfect balance of speed, energy efficiency and sound. It’s ideal for sports stadiums, schools or a quiet library.

+

Universal Voltage The new EXTREMEAIR can be connected to any voltage from 100 to 240 VAC - and 50/60 Hz.

+

Antimicrobial-infused air delivery system

Better Hygiene - While all of our hand dryers eliminate paper towel mess, the EXTREMEAIR goes one step further with antimicrobial infused air surfaces.

80-90% LESS ENERGY

3X FASTER

98% COST SAVINGS

gXt SERIES

eXt SERIES

FASTEST • MAXIMUM performance

GREENEST • NO dedicated line required

best selling • energy efficient

Connect up to 3 dryers on one line!

16,000-10,000 LFM Adjustable Air Velocity 83 - 69 dB Adjustable Sound 135° F Air Temperature

16,000-10,000 LFM Adjustable Air Velocity 83 - 69 dB Adjustable Sound 85° F Air Temperature

10 + seconds

1500 - 800 watts

Adjustable Drying Time

Adjustable Power

Steel White

Black Steel Stainless Graphite Chrome Steel

GXT9 GXT9-M GXT9-BG GXT9-C GXT9-SS

540 - 300 watts

Adjustable Drying Time

Adjustable Power

EXT MODEL REFERENCE CHART

GXT MODEL REFERENCE CHART ABS White

12 + seconds

Universal Voltage

ABS White

Steel White

Black Graphite

Steel Chrome

Stainless Steel

Universal Voltage

100-240 V 50/60 Hz

EXT7

EXT7-M

EXT7-BG

EXT7-C

EXT7-SS

100-240 V 50/60 Hz

Recessed Mounting is available by designating ( R ) after model no. or order kit separately. See accessories chart.

Recessed Mounting is available by designating ( R ) after model no. or order kit separately. See accessories chart.

SPECIFICATIONS eXtremeAir gXt & eXt HAND DRYER e XtremeAir ®

New Smart Sensor

DRYER PLACEMENT - Dryers should be placed at least 2 feet apart and at least 12” from washbasin. Do not install dryer over washbasin. Automatic dryers should be at least 18” above any projection which may interfere with the operation of the automatic sensor.

Ultra energy efficient microprocessor-controlled sensor turns dryer on when hands are under the outlet for up to 35 seconds.

Standby power is only one watt. RoHS compliant lead-free design.

ELECTRICAL REQUIREMENTS - gXt dryers connect to a dedicated 15 or 20 amp line. eXt dryers do NOT require a dedicated line. Do not connect more than three

New Longer Lasting Motor New motor lasts up to 25% longer and is quieter. Produces 5/8 HP. Operates between 14,000 to 28,000 RPM. Automatic resetting thermal protector.

43% Smaller

eXt

The new eXtremeAir Plus is the most compact hand dryer in the industry. It’s 43% smaller than old “industry standard” high speed hand dryers.

Quantity Estimate: Average traffic washroom..............1 dryer per 2 washbasins Heavy traffic 100-240 washroom..................1 dryer per washbasin EXT Series GXT Series All models: V, 50/60 Hz 12-15 sec sec per sink 54” wash fountain...........................410-12 dryers Cover Material and Finish 300-540 W 800-1500 W

Vandal Resistant Two tamper proof screws secure the heavy duty vandal resistant cover to the steel base. Motor and heater are inaccessible to vandals. Air intake is shielded for additional safety.

DIMENSIONS: Surface:10-1/8” W xGXT9 9-3/8” H x 5-5/8” EXT7 D Flame retardant white ABS

EXT7-M Steel with white epoxy finish GXT9-M MOUNTING HEIGHTS: Men 44” Steelfloor with satin chrome finish Women GXT9-C42” EXT7-C (From to bottom of Stainless hand dryer) Children GXT9-SS32-42” EXT7-SS steel with brushed finish

Handicapped 36” Recessed Mounting is available by designating ( R ) after model no. or order kit separately -see pn ADA-W or ADA-SS on accesories chart.

SHIPPING WEIGHT: eXtremeAir 9 lbs, eXtremeAir-M/BG/C/SS 11 lbs

Heating Element The heating element has an automatic thermal protector and operates in the black range for maximum life.

Heavy Duty One-Piece Cover Options

5

Year

hand dryers to one 20 amp line.

MOUNTING - One side of dryer should be mounted to a stud. All surface mount dryers are provided with conduit entrances for both in-wall and surface wiring.

Compact

Flame retardant white ABS Steel with white epoxy finish (M) Steel with black graphite epoxy finish (BG) Steel with satin chrome finish (C) Stainless steel with #4 brush finish (SS)

P/N Accessories ADA-W

White recess kit for all white models

5 Year Premium Warranty

ADA-SS

Stainless steel recess kit for (BG), (C), (SS) models

Includes same-day factory repair or shipment of replacement parts.

AP

Universal adapter plate for all surface models. Stainless.

SG

Stainless steel splash guard for all models. 14”H x 16”W.

5-5/8 (143mm)

7/16 (11mm)

4”

MOUNTING HOLES FOR 1/4” (M6) DIA. SCREWS

8-15/16 (227mm)

8-3/16 (208mm)

®

9-1/16 (230mm) 1-7/8 (48mm) 8-7/16 (214mm)

7/16 (11mm)

9-13/16 (249mm)

7/8 (22mm) DIA. IN-WALL & SURFACE CONDUIT ENTRANCES

Recess Kit Reduces the depth of the dryer to less than 4 inches.

Figure 1 - eXt Series Surface Mount (102mm) FRAME INSIDE ROUGH OPENING TRIM PIECE 12-3/4 W X 11-7/8 H (324mm X 302mm)

2 (51mm) DEPTH OF BOX

4

Adapter Plate (AP) Stainless steel plate (14” H x 16” W) used to cover holes from older dryers or towel dispensers .

Splash Guard (SG) Stainless steel plate (14” H x 16” W) mounts under the dryer.

FINISHED WALL ROUGH WALL OPENING 1 (25mm) CONDUIT ENT. 9-5/8 (245mm) 12-3/16 (310mm)

Figure 2 - eXt-MR Series Recessed Mount

C 9-7/8 (251mm)

®

US

MADE IN U.S.A.

Distributed by:

2-5/16 (58mm)

ProDryers, Inc. | 39201 schoolcraft road suite B7 | Livonia, MI 48150 888-50-DRYER | 888-503-7937 (toll-free) | 734-466-9776 (direct) 734-943-5906 (fax) www.extremeairhanddryers.com

American Dryer® Accessories ACCESSORIES ENHANCE ALL eXtremeAir, ADVANTAGETM AND GLOBAL® SERIES HAND DRYERS

NEW FOR 2013

ADA WALL GUARD - An Industry First!

NEW!

The all-new patent pending Wall Guard is ADA compliant without the need to recess the dryer into the wall and helps protect the wall and floor from moisture. The Wall Guard features seamless one-piece stainless steel construction and is easy to install.

Part #: ADA-WG*

NEW!

ADA RECESS KIT The all-new Recess Kit reduces the protrusion of the dryer to less than 4 inches from the wall to meet ADA requirements when the dryer is installed in a hallway or narrow passage.

The Recess Kit features seamless one-piece stainless steel construction and is easy to install.

Part #: ADA-RK*

ADAPTER PLATE The Adapter Plate is a 16” W x 14” H stainless steel plate that covers mounting holes when replacing old hand dryers and paper towel dispensers.

Part #: AP

* not for use with HAIR dryers.

For more information visit

americandryer.com

ADA WALL GUARD - An Industry First!

• • • • • •

ADA compliance without having to cut a hole in your wall Easy installation below the dryer with four screws provided One-piece 19 gauge stainless steel Dimensions: 9-3/8” W x 18” H x 3-1/2” D Shipping weight: 4 pounds Part number: ADA-WG

ADA RECESS KIT • • • • • • •

3 34" 1412"

ADA compliance by reducing the protrusion of the dryer to less than 4 inches Easy installation between standard 16” on center wall studs 14-1/2” W X 19-1/2” H rough wall opening One-piece 19 gauge stainless steel Dimensions: 16-1/4” W x 21-1/4” H x 2” D Shipping weight: 7 pounds Part number: ADA-RK

1 19 2" ROUGH WALL OPENING

"X" TO FINISHED FLOOR

"X" Men

35 3/8"

Women

33 3/8"

Children

23 3/8" - 33 3/8"

Disabled

27 3/8"

ADAPTER PLATE

(4) Mounting Studs for dryer

step-02_rough opening

Universal Adapter Plate

• • • • • •

Dryer

10/19/2012

Jay Harnish

Covers holes and “footprint” from older dryers and paper towel dispensers Easy installation with four screws provided One-piece 18 gauge stainless steel Overall product dimensions: 16” W x 14” H Shipping weight: 5 pounds Part number: AP

In Wall Conduit Entrance Dryer Cover

1 78"

(4) Mounting Holes to wall

Figure 1 - Adapter Plate Installation

PART NO.

ACCESSORIES

ADA-WG*

ADA Compliant seamless stainless steel wall guard

ADA-RK*

ADA Compliant seamless stainless steel recess kit

AP

Stainless steel universal adapter plate

*Not for use with HAIR dryers For more information, visit americandryer.com American Dryer, Inc.

Dryer not included

33067 Industrial Road I Livonia, MI 48150 I U.S.A. Toll Free 800.485.7003 U.S. I Ph: 734.421.2400 I Fax 734.421.5580

Web: www.americandryer.com Email: sales@americandryer.com

© American Dryer, Inc. All Rights Reserved. Rev. July 2013

Appendix 2 Case Study Oakledge Park Burlington, Vermont

gk architects 95

gk architects

Case Study Oakledge Park 97

gk architects

Case Study Oakledge Park Plan & Elevations 99

Exterior Paint Colors

Walls - Ben Moore PM-32 Briarwood

Gable - Ben Moore 1557 Silver Song

Trim - Ben Moore 602 Gondola Ride

Trim - Ben Moore HC-70 Van Buren Brown

Interior Paint Colors

Walls - Ben Moore 2143-70 Simply White

Flooring & Base

Accent - Ben Moore 420 Apple Lime Cocktail

Interior Wall Detail

Accent - Ben Moore 147 Fruity Cocktail

Accent - Ben Moore 768 Atlantis Blue

Polyaspartic Flooring

Doors, Windows & Hardware

Trim - Ben Moore HC-70 Van Buren Brown

De La Fontaine Door ST Series, Painted

Door Hardware - TBD

gk architects

Case Study Oakledge Park Color Board 101

Partitions

HDPE Floor Mounted Scranton Products

Lighting

Solatube

Scranton Products Color Shale

Fixtures

American Standard Wall Hung Toilet

Waterless Urinal Sonora 2004

Kohler Chesapeake Sink

American Standard Faucet

Existing Water Fountain Powdercoated

Soap Dispensor Provided by Burlington Parks & Rec

Toilet Paper Dispensor - Provdied by Burlington Parks & Rec

Mirror w/ Stainless Steel Frame

Accessories

Koala Kare Baby Changing Table - Cream

American Dryer Extreme Air GXT - White

Pipe Protectors - White

ADA Signage - Brown

gk architects

Case Study Oakledge Park Color Board 103