NIKKEN REAMER SERIES Carbide Reamer Series MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
For difficult-to-cut materials evolution series Designed for difficult-to-cut materials with an extremely heat-resistant alloy coating for such as Inconel, Hastelloy, and Waspaloy.
For aluminium, aluminium casting Spectrum Reamer Series
HSS Reamer Series MILLING BLADE
MILLING BLADE
MILLING BLADE
Super-hard with a new thin-film hydrogen-free SPX coating MILLING BLADE
PF Radical Reamer Series
The run-out accuracy and the tool life have been substantially improved with Press Fit type Radical Reamer. This is sophisticated reamer with fine powder carbide and TiCN-2 coated for low friction purpose and hardness HV3,500, thus its tool life is extremely extended even with water soluble coolant.
MILLING BLADE
MILLING BLADE
MILLING BLADE
MILLING BLADE
Carbide Mill Reamer
As the Mill Reamer made by K10 grade carbide, the cutting speed can be substantially increased for the productivity improvement. Especially it performs very well on Cast Iron, Meehanite, Aluminium, and Non-steel metal.
MILLING BLADE
The NC Sensor Reamer is dedicated for better surface finish, especially effective on Stainless Steel, Die Steel, Annealed and Tempered Steel. The high precision finish surface can be achieved with its TiN Coated and its burnishing effect. The reamer can be used with even water soluble coolant.
Tough-Cut Skill Reamer
This is all-mighty reamer, which is made by powder HSS & ion-nitrided and good for tough materials, die steel, annealed and tempered steel.
Turning Skill Reamer
Short type Skill Reamer for NC Lathe
The ultra high left-handed helix of 60 degree performs smooth reaming operation.
DLC(Diamond-Like Carbon) coating provides improvement for aluminium and non-ferrous metals reaming. 3 type of the reamers with milling blade are into a line up
DLC(Diamond-Like Carbon) coating provides improvement for aluminium and non-ferrous metals reaming. 3 type of the reamers with milling blade are into a line up
NC Sensor Reamer
Broach Reamer
Carbide Radical Mill Reamer DLC Coating Carbide Mill Reamer DLC Coating
293
P.
Long Type Reamer
Longer neck type for deep hole is also available.
Recommended Cutting Conditions and Special Made Reamer/ Technical Information ■Various Application - Through Hole, Stepped Hole and Blind Hole Through Hole series
Stepped Hole series
Blind Hole series
Carbide Broach Reamer The Carbide Broach Reamer maintain the excellent surface finish for Aluminium and Cast Iron reaming operation.
JAPAN PAT.
Excellent Circularity and Straightness
Excellent Circularity and Straightness
Excellent Circularity and Straightness
26
