17 Series Drill Inserts ®
T-A & GEN2 T-A
Diameter Range 17.00mm to 17.99mm
A 140°
Drill Inserts
Cast Iron Geometry K20 (C2)
Stainless Steel Geometry K20 (C2)
LR Geometry K20 (C2)
Decimal Equivalent
(mm)
0.6693 0.6719 0.6875 0.6890 0.7030 0.6693 0.6719 0.6875 0.6890 0.7030 0.6693 0.6719 0.6875 0.6890 0.7030
17.00 17.07 17.46 17.50 17.86 17.00 17.07 17.46 17.50 17.86 17.00 17.07 17.46 17.50 17.86
GEN3SYS®XT Item Number
(inch)
43
⁄ 64” 11 ⁄ 16” 45
⁄ 64”
43
⁄ 64” 11 ⁄ 16” 45
⁄ 64”
43
⁄ 64” ⁄ 16”
11
45
⁄ 64”
GEN3SYS® Item Number
Stk.
7C217P-17CI 7C217P-.671CI 7C217P-0022CI 7C217P-17.5CI 7C217P-.703CI 7C217P-17AS 7C217P-.671AS 7C217P-0022AS 7C217P-17.5AS 7C217P-.703AS 7C217P-17LR 7C217P-.671LR 7C217P-0022LR 7C217P-17.5LR 7C217P-.703LR
Stk.
쏹
쎻
5C217H-17-CI 5C217H-.671-CI 5C217H-0022-CI 5C217H-17.5-CI 5C217H-.703-CI
●
-
-
쎻
-
-
쎻
-
-
●
-
-
쏹 쎻 쎻 쏹
쎻 쎻 쏹 쎻
쎻
-
-
쏆
5C217H-17-LR 5C217H-.671-LR 5C217H-0022-LR 5C217H-17.5-LR 5C217H-.703-LR
쏆
쏆 쏆 쏆 쏆
쏆 쏆 쏆 쏆
P
M
K
Steel N/mm2
Stainless Steel N/mm2
Cast and Ductile Iron N/mm2
<1365
<940
<1020
N
S
ASC 320 Solid Carbide
Supplied in 1 piece packages.
H
Non-ferrous Material High Temperature Materials Hardened Materials N/mm2 N/mm2 N/mm2 <855
GEN3SYS
A (Diameter) Material
Revolution & Core Drill
and
<990
For further information on Material, Hardnesses and Cutting Data, please <1365 refer to the Technical Section from page 137.
Stk. - Stock Availability. 쏹 Stock Item. 쎻 Stocked in limited quantities, advanced planning is recommended. 쏆 Non-stock standard. Normal delivery 15 to 20 days.
Special Tooling
Thread Milling
AccuPort 432
Any non-standard size available.
+44 (0)1384 400 900
+44 (0)1384 400 105
enquiries@alliedmaxcut.com
www.alliedmaxcut.com
121