AP-K - Brochure AP Slurry tankers and technology

Slurry tankers and technology • Slurry tankers • Drip hose booms • Injectors • Slurry trailers • Buffer tanks

High performance and reliability

Many years of experience AP Gyllevogne has more than 20 years of experience in the development of slurry tankers and accessories for slurry spreading.

AP Gyllevogne markets a complete product range of: • Slurry tankers, 15–37 m³ • Drip hose booms, 12–36 m • Slurry injectors • Slurry trailers, 25–38 m³

High quality for professional users

AP Gyllevogne slurry tankers and slurry equipment are designed for professional users who demand high performance and reliability.

2

AP is a brand owned by the company AP-K. We develop, produce, and sell slurry trailers for tractors, slurry trailers for trucks, mobile buffer tanks and technical solutions for slurry handling worldwide.

See www.ap-k.dk for further information.

Experience and quality

Experience and quality

AP Gyllevogne equipment is designed for demanding use and is under constant development. This means that the company always supplies tankers that use the latest technology.

Every single tanker is manufactured in-house.

Our extensive experience and constant product development ensures our customers acquire products of the highest quality with maximum performance and reliability.

We carry out a final quality control to ensure that our products comply with all of the specifications and meet customers’ individual requirements.

Fully finished product surfaces

The exterior and interior of every tank is sandblasted to achieve optimal adhesion.

A special epoxy coating, which has been developed to withstand extremely aggressive environments, is applied to the tank interior.

The exterior of the tank is first primed with two coats of epoxy, then a 2-component coat is applied.

The tank exterior is coated twice to achieve the perfect finish.

Fitted parts are hot-dip galvanised.

3

Equipment for all applications

GV 35 with 800/70X38 tyres and 36 m drip hose boom.

Equipment and accessories

The range covers everything from simple transport tankers with pumps to empty the tanks, to advanced fully equipped computer-controlled tankers with data logging.

Tankers can be prepared for or supplied with equipment for the addition of acid/ammonia.

An acid/ammonia tank can also be built into the actual slurry tanker.

Often the slurry tanker is supplied with an 8-ton lift for supporting the drip hose boom or injector.

Built-in hydraulic pump to drive the wheel drive.

Special tankers made for the job

AP Gyllevogne collaborates with customers to supply the optimal tanker.

Using 800/70X38 tyres results in significantly reduced ground pressure.

Hydraulically driven wheel drive on the middle axle minimises the chances of getting stuck.

Hydraulics

Every slurry tank utilises as standard the tractor’s hydraulic supply to operate the slurry tanker’s functions.

Pump to empty the tank, driven directly from the tractor’s PTO. Powerful 8-ton lift.

4

Tyres and axles

Slurry tanker with 800/70X38 tyres results in 50% less ground pressure

Raised front axle.

Axles and hubs

Tyre size

410 x 180 mm brakes are supplied as standard with hydraulic brakes or alternatively with air brakes.

Large tyre 800/60X34 Diameter 1875 mm

Two-axle tankers are supplied as standard with tilting bogie with rotatable rear wheel.

Alternatively, can be supplied with hydraulic suspension and rotatable rear wheel.

XXL Large tyre 800/70X38 Diameter 2052 mm

Every AP Gyllevogne tanker is equipped with strong high-quality axles from BPW.

Three-axle tanker supplied with hydraulic suspension, level regulation and with rotatable front and rear axle.

Front axle can be raised when driving with an empty tanker.

Wheel drive on the middle axle can be fitted as extra equipment.

The wheel drive provides 100 HP and operates in both forward and reverse.

Standard tyre 750/60X30.5 Diameter 1675 mm

Every AP Gyllevogne tanker with 25 m3 or less is supplied with 750/60X30.5 tyres as standard.

Alternatives: 850/60X30.5 or 650/60X30.5.

5

Loading cranes with 8’’ or 10’’ pumps 100% filling of slurry tanker

The AP Gyllevogne tanker with loading crane and sealed tank is equipped with an electronic full sensor, which ensures that the tanker is 100% full before loading automatically stops. Any overflow and foam is led back to the slurry tank via the return hose.

The loading pump is hydraulically driven, and driven directly from the tractor’s hydraulic supply.

The loading crane can be used on both sides of the slurry tanker, and can be supplied with extra sections and/or a telescopic extension, depending on the task.

Efficient emptying via the loading crane

The AP Gyllevogne slurry tanker with loading crane and shut-off valves, ensures rapid emptying though the crane’s large hose.

The tank is emptied by a pump, which is driven by the tractor’s PTO transmission shaft.

Special loading crane, designed for high slurry tanks

5 m high slurry tank.

6

Computer controlled for optimal use AP Gyllevogne Joycontroller

The AP Gyllevogne Joycontroller is made by Danfoss and is specially designed to control the many functions of an AP Gyllevogne slurry tanker.

The display and joystick are fitted in the tractor cab, so that all of the functions can be controlled from there.

The AP Gyllevogne Joycontroller applies the entered amount of spreading automatically by comparing vehicle speed and slurry flow.

All of the data relating to the spread of slurry per hectare, the day’s production, total production, operated hours and kilometres are stored in the computer and can be printed out from the computer.

Hydraulic control and electronics in a protected position on the tanker.

Danfoss PVG valves are used.

AP Gyllevogne will readily supply tankers in special colours.

7

AP Gyllevogne drip hose booms, from 12–36 m

Design

AP Gyllevogne drip hose booms are fitted on a moveable rear frame.

The rear frame is raised and lowered using hydraulic cylinders.

Hydraulic sectional shut-off can be supplied as required.

All slurry hoses are 50 mm as standard to avoid any blocking of the hoses.

The raising cylinders are fitted on a floating suspension, which means that the drip hose boom follows the terrain even when the tanker moves over an uneven area.

Drip stop

The AP Gyllevogne drip hose boom can be equipped with an efficient drip stop, which tilts the hoses to the vertical position before transport. This prevents any unwanted drips from the hoses.

Hitched or mounted

The drip hose boom is built on a powerful rear frame fitted to the slurry tanker’s lift or fixed bracket.

8

Hose distributor

BOMECH Trailing Shoe.

Hose distributor

• The AP Gyllevogne drip hose boom is equipped with one, two or four vertical distributors.

• AP Gyllevogne uses vertical distributors from Vogelsang or Harsø as standard.

• The vertical distributors are equipped with a stone trap for collecting stones.

• The stone trap is automatically emptied when the boom is folded in.

Can also be supplied with a complete Trailing Shoe boom from BOMECH as required.

The trailing shoe creates a track in the ground, so that the slurry penetrates.

Hydraulic sectional shut-off

AP Gyllevogne has developed a special hydraulic system for sectional shut-off.

Sectional shut-off consists of a stainless steel pipe with a synthetic core.

The core has bored holes and by turning the core, selected hose outlets can be shut-off.

Sectional shut-off is hydraulically controlled using the Joycontroller computer.

In addition, with sectional shut-off, one whole side of the hose boom can be shut-off.

9

Injectors

10

Slurry trailers and buffer tanks

Slurry trailers

As a total supplier of slurry transporters and slurry spreading, AP Gyllevogne also supplies complete slurry trailers from 25–38 m3.

AP Gyllevogne trailers are supplied as standard as selfsupporting trailers with three or four axles from BPW.

Buffer tanks

AP Gyllevogne buffer tanks can contain 80–120 m3.

BPW axles and axle hubs.

Hydraulic wheel suspension and hydraulic support legs.

AP Gyllevogne slurry trailers are fitted with a self-loading crane, which can be operated using a Scanrego radio controller.

Trailers are fitted as standard with a 10’’ filling hose and can be supplied with a Vogelsang displacement pump, which pumps 6000–9000 l/minute.

11

Standard slurry tankers GV15

GV18

GV20

GV25

GV30

GV35

2

2

2

3

3

3

750/60x30,5 Ø1675

750/60x30,5 Ø1675

750/60x30,5 Ø1675

750/60x30,5 Ø1675

800/60x34 Ø2025

800/60x34 Ø2025

1860

1860

1860

1860

2025

2025

Total number axles, BPW Tyre sizes

mm

Distance between axles Tank diameter

mm

1.750

2.000

2.000

2.000/2.150

2.150

2.200

Tank length

mm

6.500

6.150

6.750

8.300/7.300

9.000

9.750

15 m3

18 m3

20 m3

25 m3

30 m3

35 m3

Tank volume Tank casing

mm

5

5

5

5

5

5

Tank end pieces

mm

6

6

6

6

6

6

Gauge

mm

2.180

2.180

2.180

2.180

2.180

2.180

GV 37 is now available for commercial sales. Ask for technical details.

Standard - Slurry Trailers

GT30

GT34

GT38

Tank diameter

mm

2.150

2.150

2.150

Tank length

mm

8.500

9.500

10.500

Tank volume

mm

30 m3

34 m3

38 m3

2

2

2

10’’

10’’

10’’

4

4

4

yes

yes

yes

Baffle plate - total number Pump tower Tank casing Remote control

mm

AP-K ApS

BORGERGADE 46 DK-7323 GIVE Tel. +45 97 72 12 61 www.ap-k.dk

12

AP is a brand owned by the company AP-K. We develop, produce, and sell slurry trailers for tractors, slurry trailers for trucks, mobile buffer tanks and technical solutions for slurry handling worldwide.

See www.ap-k.dk for further information.

Technical specifications in this brochure are indicative only and are subject to change without notice.

AP GV and GT technology are continuously updated in accordance with customers' wishes and local authorities' requirements. Therefore, the technical specifications are constantly changing. Contact your local dealer or technical department at AP-K for exact data.