MAN 6x6 Specsheet

TGS 6x6 Chassis TGS 6x6 Chassis M Cab

Evolve to MAN

TGS 6x6 Chassis

Wheels and Tyres Fitted with 315/80 R22.5 tyres on 9.00 x 22.5 10 hole steel disc wheels. Spare wheel carrier mounted on left side of chassis.

Basic wheel changing equipment supplied.

Fuel Tank 400L steel fuel tank with guard plate on right + 35L Adblue tank on left, with lockable caps.

Option of 600L aluminium tank +35L Adblue.

Engines

Intake / Exhaust System

PTO

MAN 6-cylinder 4-valve in-line engine, with Common Rail injection, turbocharging and intercooling. EDC electronic engine regulation.

Raised air intake with pre-filter mounted on the L/H side of the cab with air filter housing under rear of cabin.

Crankshaft driven (live-drive) power take-off on the flywheel side of the engine at 12 o’clock position. Ratio = 1.233, rated up to 870Nm continuous operation.

Complete with dual-flange elastic coupling damper.

EURO 5 emission standard with OBD2 (onboard diagnosis) and NOx-control. SCR catalytic converter with Adblue injection.

MAN Engine Valve Brake (EVB) fitted as standard.

Exhuast mounted on R/H side of chassis with vertical discharge.

Transmission

Front Axle / Suspension

MAN 12 speed TipMatic (ZF AStronic) gearbox. 12 forward speeds, 2 reverse ratios. Suitable for gross train weights up to 90T. Automated constant-mesh gearbox.

MAN hub reduction VP-09 (9,000kg) driven front axle. Drive to front axle (dis)engageable.

With MAN TipMatic, shifting and clutching are electro-pneumatic there is no clutch pedal. Normal mode is automated with manual mode available (shifting via fingertip lever). ‘M’ setting for precise low-speed manoevering in forward & reverse. ‘X’ setting for off- road use.

Transfer Case G252 two-speed transfer case with (dis)engageable drive to front axle.

ENGINE SPECIFICATIONS

Differential lock with warning buzzer. 8,000kg parabolic springs with stabiliser & shock absorbers.

Rear Axles / Suspension MAN Hub-reduction HPD 1382 / HP 1352 tandem axle with slide shackle multi-leaf springs, stabilisers & shock absorbers.

Fitted with inter axle & cross axle differential locks. Standard diff ratio of 4.00, optional diff ratios available: 3.25 / 3.63 / 4.33 / 4.83. Suspension design rating 2 x 13,000kg.

TRANSMISSION SPECIFICATIONS

Engine HP

Model

Power Rating

Torque

Model

Transmission Ratios

Std. Differential Ratios

440 HP

MAN D20 10.518 Ltrs

324kW @ 1600 - 1900rpm

2100Nm @ 1000 - 1400 rpm

ZF 12 AS 2330 OD

12.33 - 0.78

4.00

Frame

Cab Interior

High-build design ladder frame made from QstE500TM high strength steel. Frame Dimensions 270mm x 85mm x 9.5mm. 3 piece steel bumper fitted.

High comfort ISRI driver’s seat with air suspension, integrated seat belt and arm rests. Factory fitted climate control system.

Front Under Run Protection System (FUPS) not fitted to this model due to off road vehicle classification.

Brake System MAN Electronic Brake System (EBS) with ABS standard. Drum brakes fitted to all axles.

Full air operated system fitted with air dryer.

Hand operated trailer brake.

MAN ‘Easy-start’ function holds service brakes on hills for smoother pulling away. Off-road ABS switch for improved braking performance when off road.

Double DIN sized MAN Topline stereo system with 5.2” touchscreen, AM / FM tuner, CD player, USB & auxiliary inputs, Bluetooth, control functions integrated with the multi function steering wheel.

6-speaker sound system.

Electrically operated power windows. Central storage box between the seats, large storage drawer in the dash console, modular cup holder and glasses storage compartment. Silver dashboard trim strip.

Electrical System

Lights

24V Electrical system with manual battery isolation switch.

80 Amp alternator, 2 x 155Ah batteries.

Headlights fitted with longlife H7 type globes. Lighting system operation check.

Optional electrical preparation for reverse camera connection, and optional integrated navigation available.

KSM module fitted for communication of required body/ chassis function.

Speed Limiter

Instrument Panel

Paintwork

Vehicle electronically limited to 100kmh. Driver programmable speed limit function can operate between 40kmh and 100kmh.

Full electronic Base Line dash display with easy access to vehicle information systems.

Permanent guages: tachometer, speedometer, odometer, air pressure guages, coolant temperature, fuel guage, indicator operation, gear selection.

Cab finished in Traffic White (RAL 9016). Chassis finished in Graphite Black (RAL 9011).

Clutch Single plate 430mm diameter clutch - asbestos free.

Sample electronic display: time, outside temperature, turbo boost, trip meter, brake wear, oil level, fuel consumption, battery voltage, etc.

Cab Options M Cab (day) 2240mm wide, 1880mm long.

Warning lights for all major functions such as: diff lock status, low air pressure, low fuel, lights, cab lock, etc.

Cab Exterior Cab compliant with ECE R29 safety requirements. All metal parts are Galvanised. 65 degree cab tilt angle, 87 degree door opening.

Exterior sunvisor. Entry lighting for driver and passenger. Central locking for both doors. Electrically adjustable and heated rear view and kerb-view mirrors. Manual front-view mirror.

Lockable front access panel.

Electrically operated cab tilting mechanisim.

Mechanical roof hatch. Coil sprung cab mounts front and rear.

Chrome trim to front grille. Stone guard grille in front of radiator.

Steering Multifunction steering wheel adjustable for rake and reach.

Steering wheel controls for cruise control, programmable speed limiter, electronic dashboard menu displays, plus controls for the stereo system and Bluetooth phone system.

Steel bumper and lower plastics finished in grey.

Protective grille for headlights.

Specification Data

GVM: 33,000kg

M CAB

M CAB WEIGHTS

GCM: 90,000kg

TURNING CIRCLE

Wheelbase

Front (kg)

Rear (kg)

Total (kg)

Kerb to Kerb (m)

3600mm

5360

4830

10190

18.5

20.0

4500mm

5415

4985

10400

20.4

21.9

M CAB CHASSIS DIMENSIONS (mm)

EMPTY

LOADED

EMPTY

Wall to Wall (m)

LOADED

Wheelbase

FOH

ROH

OAL

CA

CF

AE

BL

H1

H2

H3

H4

W1

W2

3600mm

1492

1500

7992

2950

5850

650

6880

3344

3279

1170

1100

2490

2240

4500mm

1492

2500

9892

3850

7750

650

7670

3344

3279

1170

1100

2490

2240

1. All above weights and dimensions are subject to confirmation and may vary depending on final specification. Manufacturing weight tolerance +/- 3%.

2. State and Federal regulations over ride information supplied on this brochure.

3. Vehicle images in this specification sheet are for illustration purposes only.

4. Maximum body length is calculated using a rear overhang of 60% of the wheelbase to a maximum of 3.7m.

5. Tare weight includes 400 litres of fuel, 75kg driver, spare wheel and steel wheels.

6. Specifications are subject to change without notice. Copyright © 2014, MAN Automotive Imports Pty Ltd.

MAN Automotive Imports Pty Ltd 72 Formation Street, Wacol, QLD 4076 • PO Box 301, Goodna QLD 4300 T: (07) 3271 7777 • F: (07) 3271 2047 www.man.com.au