Operation Engine compartment 왘
Using a rag, turn cap 1 slowly approximately one half turn counterclockwise to release any excess pressure.
왘
Continue turning cap 1 counterclockwise and remove it.
Windshield/rear window washer system and headlamp cleaning system The windshield washer reservoir is located on the passenger side of the engine compartment.
The coolant level is correct if the level 앫
for cold coolant: reaches the top of the mark (plastic bridge) visible through the filling opening
앫
for warm coolant: is approximately 0.6 in (1.5 cm) higher
왘
Add coolant as required.
왘
Replace cap 1 on the filler neck.
왘
Tighten cap 1 clockwise until you hear it click three times.
Fluid for the windshield/rear window washer system and the headlamp cleaning system is supplied from the windshield washer reservoir. It has a capacity of 7.9 US qt (7.5 l). During all seasons, add MB Windshield Washer Concentrate “MB SummerFit” to water. Premix the windshield washer fluid in a suitable container. Warning!
1 Cap
G
Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned.
For more information on coolant, see “Coolants” (컄 page 427).
275