TU831-1 Masonry Project

4 2 A1 02 04

2 4 A1 02 04

A

B

A

B 1580

2540

AT_BW_03 100mmX215mmX440mm 15N kilsaran concrete block to be used in a staggered rising wall with a total wide of 325mm. A 15mm sand cement mortar joint needs to be used on the blocks on flat to keep the rising wall level all the way up the the cavity wall build up.

70

AT_FD1

1580

130

1100

1100

2890

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

60 910

1150

2 WC

AT_D_03

2 m²

2

2700

AT_D_03

900

2750

220

UP

2620 3200

1500

1 Entrance Hall 10 m²

AT_JN_01 Sawn whitewood carcassing C18 treated timber 175mmX44mm noggings at max 1350mm c/c, (BBA, CE2, EYTR compliant with a 60 minute fire rating.

1 A1 02 03

AT_J_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400 c/c. (BBA, CE2, EUTR compliant with 60 minute fire rating.

2

14 13

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

9

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown AT_F_01 smooth brick(ISO 9001:2015 and CE certified).

8mm soundbarricade foam underlay(IIC 68,69)(STC Reaction to fire10mm class A1, frost resistant 63)(Delta 25). hexagonal carrara F2. grey125mm marble cavity. 115mm kingspan mosaic floor finish with agreenguard slip rating ofXPS R10 insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, AT_F_04 44mmX44mm earten radiata treated timber battens 8mm foam 68,69) (STC whichsoundbarricade are non flamable andunderlay(IIC SCS certified.

12.5mm 63) (Delta 25). 10mm enginnered oak treated timber gyproc moisture resistant plasterboard(A2-s1, d0(B1) 353 can to befire), nailed down.

Solid wood floorsthermal up to reaction EN 520:2004+A1:2009, 160mm in width can be with glueda down. conductivity 0.25W/mK 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

7 5

UP

2

REFER: A1 02 SCALE: 1 : 50

4 3

AT_TJ_01 Sawn whitewood carcassing C18 treated timber trimmer joist, (BBA, CE2, EUTR compliant with a 60 minute fire rating

AT_W_01

1350

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_W_01

AT_W_02

1270

900

900

0 Ground FFL

1270

1350

1270

900

ARCHITECT:

1 First FFL Structure

3

REFER: A1 02 SCALE: 1 : 50

PROJECT:

Proposed Planning Kelly's Avenue

AT_FD1

-1 Top Found

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

3 AT_D_01

1270

AT_TJ_01 Sawn whitewood carcassing C18 treated timber trimming joist 225mmX44mm, (BBA, CE2, EUTR compliant with a 60 minute fire rating

6

AT_W_01

900

AT_UC_01 QH steel I-beam 203mmX203mmX46mm. Compliant with(JIS, ASTM, GB, BS).

8

7 m²

3

280 330 70 240

70

AT_BW_03

1

2750

1190

2470

4 Kitchen

3

1

4 2

220

AT_IW_1st Floor_01 First floor party wall. 270mmX200mm IBEC concrete beam to be sat on top with wallplate attacted.

215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity.

44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1, D0(B1) reaction to fire, (EN520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Valve 0.19W/mK

11 10

3 5470

1

11 10

7 6 5

420 AT_FD1

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

B

12

8

900

5340

900

12

9

400

AT_IW_01

600

AT_W_04

AT_F_03 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm hexagonal carrara white marble mosaic floor finish with a slip rating of R10.

13 910

AT_RS_01 Radon Sump Located Below GL with a compressive strength of 29.5 mm deflection under 10kN load

1100

530

910

2

2030

A

AT_IW_02 100mmX44mm earther radiata treated timber stud partition. Studs at max 400mm c/c with horizontal bracing at half height, double sole plate. Non flamable SCS certified. GIK sound proofing. Db 58 with a thermal conductivity of 0.037W/mK, fire rating of B-S2(EN13501-1)

1750

4090

8100

22 m²

130

2890

1270

AT_IW_01 Ground floor party wall. 215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity. 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1,D0(B1) reaction to fire, (EN520:2004=A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Value 0.19W/mK

3 Living Room

AT_BW_02

1 A1 02 03

900

AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

AT_W_03

1

1 A1 02 03

2 4 A1 02 04

AT_F_02 8mm soundbarricade foam underlay( IIC 68, 69)(STC 63)(Delta 25), 10mm Avoca Oak Treated Timber Floor Finish can be nailed down. Solid wood floors up to 160mm in width can be glued down

5350

AT_BW_02 Kilsaran concrete block 215mmX100mm on flat rising wall ( IS EN 197-1, 15167-1, 934, 12620, 1008), thermal conductivity 0.9-1.0W/mK

NOTES:

AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

AT_D_02

1

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

REFER: A1 02 SCALE: 1 : 50 CLIENT: Room Schedule

1270

2030

600

900

A

B

AT_W_04

AT_W_03

1

6 Bathrom

400

210

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

A

Level

Name

Area

0 Ground FFL Kitchen 0 Ground FFL WC 0 Ground FFL Entrance Hall 0 Ground FFL Living Room 1 First FFL Master Bedroom 1 First FFL Bathrom 1 First FFL Landing 1 First FFL Storage 1 First FFL Bedroom 2 Total Room Areas: 9

B AT_RWP_01 Floplast rain water downpipe 68mm calculated using, mean annual rainfall in mm x area in m² x runoff factor = collected rainwater in litres. (EN 12200, KM 501316)

1

7 m² 2 m² 10 m² 22 m² 11 m² 4 m² 13 m² 1 m² 11 m² 82 m²

Perimeter

Height

10435 5706 19834 21390 13935 8385 19396 4269 13935

2430 2430 2430 2430 2635 2635 2635 2635 2635

th

900

2 4 A1 02 04

r No

2 4 A1 02 04

KEY PLAN:

NOT TO SCALE

SCALE BAR:

NORTH:

4 m²

1960

5 Master Bedroom

AT_F_04 18mm plywood (EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68,69)(STC 63)(Delta 25), 10mm hexagonal carrara white marble mosaic floor finish with a slip rating of R10.

2230 2190

2980

AT_CWSC_01 Polytank insulated CWSC with a 150L capacity made from polyethylene. WRAS approved ( BS4213).

Door Schedule Function

Level

Type Mark

Description

Width

Height

Comments

11 m² AT_IW_03 100mmX44mm earther radiata treated timber stud partition. Studs at max 400mm c/c with horizontal bracing at half height. Non flamable SCS certified. GIK sound proofing. Db 58 with a thermal conductivity of 0.037W/mK, fire rating of B-S2(EN13501-1)

AT_D_03

620

170 780

1 A1 02 03

1940

840

AT_D_03

700 AT_D_04

14 13

8 Storage

12 11 10

600

1 m²

170

780

1430

2

9

840

8 AT_D_03

7 6

9 Bedroom 2

5

UP

11 m²

780

1460

7 Landing 13 m²

1460

2200

830

3 AT_W_01

900

1270

AT_W_01

1350

1270

3 A1 06

4

1 First FFL REFER: A1 02 SCALE: 1 : 50

1 A1 02 03

2

AT_F_06 18mm plywood (EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25), 10mm burford grey twist super non combustable bedroom carpet made from 80% wool, 10% PP and 10% melt.

AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

4 3

2150

AT_IW_1st Floor_01 First floor party wall. 270mmX200mm IBEC concrete beam to be sat on top with wallplate attacted.

215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity.

44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1, D0(B1) reaction to fire, (EN520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Valve 0.19W/mK

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

900

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

3

5

17/05/2023 16:25:19 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

1 Wallplate REFER: A1 02 SCALE: 1 : 50

Exterior

0 Ground FFL AT_D_01

Exterior

0 Ground FFL AT_D_02

Interior

0 Ground FFL AT_D_03

Interior

0 Ground FFL AT_D_03

Interior

1 First FFL

AT_D_03

Interior

1 First FFL

AT_D_03

Interior

1 First FFL

AT_D_03

Interior

1 First FFL

AT_D_04

1000mmX2145mm senator entrance door made from composite. U-Value of 0.8W/mK, muffless sound by 38Db(water tightness PN EN 12208 to class 9A)(operational forces PN EN 13115 to class 1) Aluclad sliding door 2410mmX2185mm, Rw=33Db(-2, -5)-standard 3 glazing.

Uw=0.75W/m2K. PAS24 solution to break ins. Fire rating FD30

1000

2035 Unit 2

2410

2145 Unit 2

Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30.

FSC certified Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30.

FSC certified Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30.

FSC certified Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30.

FSC certified Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30.

FSC certified Deanta NM5 oak double door with treated timber frame 910mmX2110mm, fire rating FD30. FSC certified

910

2110 Unit 2

910

2110 Unit 2

910

2110 Unit 2

910

2110 Unit 2

910

2110 Unit 2

910

2110 Unit 2

Height

Head Height

N

0

1000

2000

5000

SCALE: 1:100

Window Schedule Level 0 Ground FFL

0 Ground FFL

1 First FFL

Type Mark

Description

AT_W_01

1950mmX1265mm side guided PVC double glazed window by okno. WT2014:Uw=1.3W/mK, muffles sound by 42Db(Wind load resistance PN-EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(operational forces PN EN 13115 to class 1) 2145mmX270mm PVC double glazed window my okno. WT2014: Uw=1.3W/mK, muffles sound by 42Db(wind load resistance PN EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(opernational forces PN EN 13115 to class 1)

1270

1950mmX1265mm side guided PVC double glazed window by okno. WT2014:Uw=1.3W/mK, muffles sound by 42Db(Wind load resistance PN-EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(operational forces PN EN 13115 to class 1) 1950mmX1265mm side guided PVC double glazed window by okno. WT2014:Uw=1.3W/mK, muffles sound by 42Db(Wind load resistance PN-EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(operational forces PN EN 13115 to class 1) 1950mmX600mm frosted glass PVC double glazed window by okno. WT2014:Uw=1.3W/mK, muffles sound by 42Db(Wind load resistance PN-EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(operational forces PN EN 13115 to class 1) 1950mmX1265mm Orital shaped PVC double glazed window by okno. WT2014:Uw=1.3W/mK, muffles sound by 42Db(Wind load resistance PN-EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(operational forces PN EN 13115 to class 1)

1270

AT_W_02

AT_W_01

1 First FFL

AT_W_01

1 First FFL

AT_W_03

1 First FFL

AT_W_04

Width

270

1950

2035

1950

Comments

2100 Unit 2

2035 Unit 2

2110 Unit 2

ST REV

DESCRIPTION

SCALE AT A1: 1 : 50

DATE CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

McNamee B C22443836 DRAWING TITLE:

1-50 Construction Plans 1270

1950

2110 Unit 2

600

1950

2110 Unit 2

DRAWING NUMBER: Project

Originator Volume

(Revit Sheet Number) Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 1265

1950

Role - Number

AT 001

2110 Unit 2

STATUS:

3

REV:

AT_SR_01 Berona Std Black 600mmX300mm Double Lapped Natural Slate Roof Finish @ 6mm Thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

AT_SR_01 Berona Std Black 600mmX300mm Double Lapped Natural Slate Roof Finish @ 6mm Thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_VG_01 Lead for valley gutter 390mm and comes in a 3m long roll. Joints should be fixed at intervals conforming to lead sheet association guidelines. Manufactured to BS EN 12588 code 5. Fixing clips are required for securing free edges of lead sheet against wind lift.

Stainless steel clips 300mmx50mm0.4mm. Valley to be sloped from the centre going from centre to left and centre to right with a fall of 1:40 to ensure appropraiate drainage.18mm plywood should be placed under the roof membrane and lead valley gutter. To be fixed onto counter battens closest to the fire break in the valley.

OSB board to be used. Sheet size is 285mmX18mm @ 2.m long

A

B

AT_F_05

AT_F_05

13 m²

AT_IW_03

AT_F_05

2.700 m 2 WC

22 m²

10 m²

2 m²

2150

AT_1F_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400mm c/c with bracing 175mmX44mm at max 1350mm c/c.(BBA, CE2, EUTR compliant with a 60 minute fire rating. 225mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK fire rating (B-S2(EN13501-1)

AT_D_02

1 1SFL 2.670 m

0 GF Ceiling

AT_D_03

AT_IW_02

-

AT_F_04

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

AT_F_03

900

AT_F_02

0 Ground FFL

0

AT_IW_01 Ground floor party wall. 215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity. 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1,D0(B1) reaction to fire, (EN520:2004=A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Value 0.19W/mK

-0.900 m

200

2 WC

1 Entrance Hall

11 10

2 m²

1 1SFL

8 7 AT_IW_02 AT_S_01

0 GF Ceiling

6

1 : 50

PROJECT: Proposed Planning Kelly's Avenue

-

AT_F_04

4 3 2

AT_F_02

0 Ground FFL

1

0

0.000 m

-1 Top Found -1 -0.900 m

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

2

-

2.430 m

5

AT_BW_02 Kilsaran concrete block 215mmX100mm on flat rising wall ( IS EN 197-1, 15167-1, 934, 12620, 1008), thermal conductivity 0.9-1.0W/mK

Cross Section A-A @ 1-50

1

2.670 m

10 m²

9

AT_F_03

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

1 First FFL

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

-1 Top Found -1

AT_TB_02 Kilsaran 12N Thermal Block(IS EN 771-3 to system +2), appendix D of TDG L 2019 complian. Thermal conductivity 0.34W/mK. Thermal blocks to be dipped in bitumen to protect them from any moisture.

AT_IW_02

22 m²

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

0.000 m

AT_WIN_01

2.700 m 12

3 Living Room

AT_1F_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400mm c/c with bracing 175mmX44mm at max 1350mm c/c.(BBA, CE2, EUTR compliant with a 60 minute fire rating. 225mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK fire rating (B-S2(EN13501-1)

2.430 m

-

5.335 m

13

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

-

14

2310

1 Entrance Hall

2430

3 Living Room

1 FF Ceiling

AT_UC_01

AT_F_05

2430

1

170

AT_DPC_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2

120

160

1 First FFL

13 m²

AT_D_03

AT_F_04

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

1

7 Landing

820

AT_F_06

2050

AT_D_03

7 Landing

4 m²

AT_IWS_01 Passive Sill Insulated Window Sill. Code P21(225mmX150mm) NSAI Approved Thermal Modeller (ISO 9001), (EPD+BBA certified) To be fitted onto brick or block outer leaf with a 10mm sand cement mortar joint below and sealed at the window opening after the windows are fixed and sealed into place to prevent water damage and leakage into the cavity.

AT_W_04

6 Bathrom

540

AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

-

1080

1 FF Ceiling

480

13 m²

2

5.400 m

1950

1 m²

2040

11 m²

5.400 m

570

7 Landing

1 Wallplate

2070

8 Storage

2640

5 Master Bedroom

2

5.335 m

AT_IW_1st Floor_01 First floor party wall. 270mmX200mm IBEC concrete beam to be sat on top with wallplate attacted.

215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity.

44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1, D0(B1) reaction to fire, (EN520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Valve 0.19W/mK

3

AT_IW_04 Floplast push fit single sock SVP 100mmX3m (EN 1329-1, KM 544331). Boxed within a 120mmX120mm partition wall. SPV to be a min of 1500mm above valley gutter level and sealed both on the inner and outer face of the roof to prevent water damage.

540

1 Wallplate

AT_FB_Fire Barrier Valley gutter fire break. Rockwool firestop complicant with EN 1366-3:2009, EN13501-2 CE marked. Fire resistant for up to 2 hours. Length 1200mm, width 240mm, thickness 80mm.

2

AT_WIN_02 1925mmX600mm side guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by 47Db(Wind load resistance PN-EN 1221- to class B5), (Water tightness PN EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operational forces PN-EN 13115 to class 1). Apply a good layer of caulk at the window and facade joints both on the interior face and outside face to ensure airtightness and prevent water leakage.

AT_CWSC_01

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

1

1920

AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

AT_SL_01 Keystone Insulated thermally broken Pressed Steel Lintel HD/K-110, sizes for front door and all windows is 125mm and for the sliding back door will be 195mm, PSi Value 0.03-0.06

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

AT_BW_03 100mmX215mmX440mm 15N kilsaran concrete block to be used in a staggered rising wall with a total wide of 325mm. A 15mm sand cement mortar joint needs to be used on the blocks on flat to keep the rising wall level all the way up the the cavity wall build up.

AT_TB_01 Kilsaran 12N Thermal Block(IS EN 771-3 to system +2), appendix D of TDG L 2019 complian. Thermal conductivity 0.34W/mK. Thermal blocks to be dipped in bitumen to protect them from any moisture. To be glued together as normal using a standard 10mm sand cement mortar joint.

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

Longitudinal Section B-B @ 1-50 1 : 50

NOT TO SCALE

KEY PLAN:

SCALE AT A1:

CHK: BMN

APP: BMN

1 : 50

DES: BMN

DRW: BMN

DRAWING SERIES: McNamee B C22443836

ARCHITECT:

DRAWING TITLE: 1-50 Sections ST REV

DESCRIPTION

DATE

CLIENT: SCALE BAR:

NORTH: N

0

1000

2000

5000

DRAWING NUMBER:

(Revit Sheet Number)

Project Originator Volume Level

TDS2 - PRO5 -

ZZ

-

Type

ZZ

-

Role - Number

M3

- AT 002

SCALE: 1:100

STATUS:

3

17/05/2023 16:25:20 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

REV:

NOTES:

AT_SR_01 Berona Std Black 600mmX300mm Double Lapped Natural Slate Roof Finish @ 6mm Thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

A

B

AT_VG_01 Lead for valley gutter 390mm and comes in a 3m long roll. Joints should be fixed at intervals conforming to lead sheet association guidelines. Manufactured to BS EN 12588 code 5. Fixing clips are required for securing free edges of lead sheet against wind lift.

Stainless steel clips 300mmx50mm0.4mm. Valley to be sloped from the centre going from centre to left and centre to right with a fall of 1:40 to ensure appropraiate drainage.18mm plywood should be placed under the roof membrane and lead valley gutter. To be fixed onto counter battens closest to the fire break in the valley.

OSB board to be used. Sheet size is 285mmX18mm @ 2.m long AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

AT_CWSC_01 Polytank insulated CWSC with a 150L capacity made from polyethylene. WRAS approved ( BS4213).

2 A1 02

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

1 Wallplate AT_FB_Fire Barrier Valley gutter fire break. Rockwool firestop complicant with EN 1366-3:2009, EN13501-2 CE marked. Fire resistant for up to 2 hours. Length 1200mm, width 240mm, thickness 80mm.

2

5.400 m 8 Storage

11 m²

1 m²

7 Landing

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

1 FF Ceiling

13 m²

-

5.335 m

2640

AT_IW_1st Floor_01 First floor party wall. 270mmX200mm IBEC concrete beam to be sat on top with wallplate attacted.

215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity.

44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1, D0(B1) reaction to fire, (EN520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Valve 0.19W/mK

5 Master Bedroom

PROJECT:

Proposed Planning Kelly's Avenue

AT_W_04 1950mmX1265mm Orital shaped PVC double glazed window by okno. WT2014:Uw=1.3W/mK, muffles sound by 42Db(Wind load resistance PN-EN 1221 to class B5)(water tightness PN EN 12208 to class 9A)(air permeability PN EN 12207 to class 4)(operational forces PN EN 13115 to class 1)

ARCHITECT:

2050

AT_D_03

AT_F_06 18mm plywood (EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25), 10mm burford grey twist super non combustable bedroom carpet made from 80% wool, 10% PP and 10% melt.

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

CLIENT:

160

AT_F_05

AT_1F_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400mm c/c with bracing 175mmX44mm at max 1350mm c/c.(BBA, CE2, EUTR compliant with a 60 minute fire rating. 225mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK fire rating (B-S2(EN13501-1)

1 First FFL

1

2.700 m

1 1SFL

-

2.670 m AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

3 Living Room

1 Entrance Hall

2 WC

22 m²

10 m²

2 m²

0 GF Ceiling

-

2.430 m

2430

AT_D_02 Aluclad sliding door 2410mmX2185mm, Rw=33Db(-2, -5)-standard 3 glazing. Uw=0.75W/m2K. PAS24 solution to break ins. Fire rating FD30

NOT TO SCALE

SCALE BAR:

NORTH:

AT_IW_02 100mmX44mm earther radiata treated timber stud partition. Studs at max 400mm c/c with horizontal bracing at half height, double sole plate. Non flamable SCS certified. GIK sound proofing. Db 58 with a thermal conductivity of 0.037W/mK, fire rating of B-S2(EN13501-1)

AT_F_02 8mm soundbarricade foam underlay( IIC 68, 69)(STC 63)(Delta 25), 10mm Avoca Oak Treated Timber Floor Finish can be nailed down. Solid wood floors up to 160mm in width can be glued down

2150

AT_IW_01 Ground floor party wall. 215mmX100mm kilsaran concrete block on flat (IS EN, 197-1, 15167-1, 934, 1262-, 1008), thermal conductivity 0.9-1.0W/mK. 50mm service cavity. 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 50mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK with a fire rating of (B-S2(EN13501-1) within the service cavity. 20mm gyproc moisture and fire resistant plasterboard(A2-s1,D0(B1) reaction to fire, (EN520:2004=A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. U-Value 0.19W/mK

KEY PLAN:

AT_D_03 Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30. FSC certified

N AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

AT_F_04 8mm soundbarricade foam underlay(IIC 68,69) (STC 63) (Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

900

0

1000

2000

5000

SCALE: 1:100

AT_F_03 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm hexagonal carrara white marble mosaic floor finish with a slip rating of R10.

0 Ground FFL

0

0.000 m AT_TB_02 Kilsaran 12N Thermal Block(IS EN 771-3 to system +2), appendix D of TDG L 2019 complian. Thermal conductivity 0.34W/mK. Thermal blocks to be dipped in bitumen to protect them from any moisture.

ST REV AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

-1 Top Found -1 -0.900 m

AT_BW_02 Kilsaran concrete block 215mmX100mm on flat rising wall ( IS EN 197-1, 15167-1, 934, 12620, 1008), thermal conductivity 0.9-1.0W/mK

DESCRIPTION

SCALE AT A1: 1 : 20

DATE CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

McNamee B C22443836

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

DRAWING TITLE:

1-20 Cross Section A-A

Cross Section A-A

h

REFER: A1 01 SCALE: 1 : 20

rt No

1

DRAWING NUMBER: Project

Originator Volume

Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 STATUS:

3

17/05/2023 16:25:22 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

(Revit Sheet Number) Role - Number

AT 003 REV:

NOTES:

1

2

3

AT_SR_01 Berona Std Black 600mmX300mm Double Lapped Natural Slate Roof Finish @ 6mm Thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

1 A1 02

1 Wallplate

2

A1 07

AT_SL_01 Keystone Insulated thermally broken Pressed Steel Lintel HD/K-110, sizes for front door and all windows is 125mm and for the sliding back door will be 195mm, PSi Value 0.03-0.06

6 Bathrom

7 Landing

7 Landing

4 m²

13 m²

13 m² AT_IW_03 100mmX44mm earther radiata treated timber stud partition. Studs at max 400mm c/c with horizontal bracing at half height. Non flamable SCS certified. GIK sound proofing. Db 58 with a thermal conductivity of 0.037W/mK, fire rating of B-S2(EN13501-1)

AT_WIN_01 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operationalforces PN-EN 13115 to class 1)

-

5.335 m

4 A1 07 1080

AT_WIN_02 1925mmX600mm side guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by 47Db(Wind load resistance PN-EN 1221- to class B5), (Water tightness PN EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operational forces PN-EN 13115 to class 1). Apply a good layer of caulk at the window and facade joints both on the interior face and outside face to ensure airtightness and prevent water leakage.

1 FF Ceiling

540

1

570

5.400 m 540

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_D_03 Deanta NM5 oak door with treated timber frame 910mmX2110mm, Fire Rating FD30. FSC certified

2070

1920

AT_IW_04 Floplast push fit single sock SVP 100mmX3m (EN 1329-1, KM 544331). Boxed within a 120mmX120mm partition wall. SPV to be a min of 1500mm above valley gutter level and sealed both on the inner and outer face of the roof to prevent water damage.

PROJECT:

Proposed Planning Kelly's Avenue

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

820

ARCHITECT:

AT_IWS_01 Passive Sill Insulated Window Sill. Code P21(225mmX150mm) NSAI Approved Thermal Modeller (ISO 9001), (EPD+BBA certified) To be fitted onto brick or block outer leaf with a 10mm sand cement mortar joint below and sealed at the window opening after the windows are fixed and sealed into place to prevent water damage and leakage into the cavity.

A1 07 4 AT_F_04 18mm plywood (EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68,69)(STC 63)(Delta 25), 10mm hexagonal carrara white marble mosaic floor finish with a slip rating of R10.

A1 06

14

200

AT_UC_01 QH steel I-beam 203mmX203mmX46mm. Compliant with(JIS, ASTM, GB, BS).

AT_F_05

170

AT_DPC_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2

1 First FFL 1 1SFL

12

AT_1F_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400mm c/c with bracing 175mmX44mm at max 1350mm c/c.(BBA, CE2, EUTR compliant with a 60 minute fire rating. 225mm GIK sound proofing Db 58, thermal conductivity 0.035W/mK fire rating (B-S2(EN13501-1)

AT_IW_02

22 m²

2 WC

2.670 m 1 Entrance Hall

11

2 m²

10 m²

0 GF Ceiling

10 AT_F_03 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm hexagonal carrara white marble mosaic floor finish with a slip rating of R10.

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

CLIENT:

-

480

3 Living Room

1

2.700 m

13

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

-

2.430 m 9

2

8

A1 07

6

1950

2040

2310

2430

7

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

KEY PLAN:

NOT TO SCALE

SCALE BAR:

NORTH:

5 AT_F_04 8mm soundbarricade foam underlay(IIC 68,69) (STC 63) (Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

4

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

3

2 2

AT_F_02 8mm soundbarricade foam underlay( IIC 68, 69)(STC 63)(Delta 25), 10mm Avoca Oak Treated Timber Floor Finish can be nailed down. Solid wood floors up to 160mm in width can be glued down

120

AT_IW_02 100mmX44mm earther radiata treated timber stud partition. Studs at max 400mm c/c with horizontal bracing at half height, double sole plate. Non flamable SCS certified. GIK sound proofing. Db 58 with a thermal conductivity of 0.037W/mK, fire rating of B-S2(EN13501-1)

A1 06 1

N

0 Ground FFL

0

0.000 m

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

0

1000

2000

5000

SCALE: 1:100

-1 Top Found -1 -0.900 m

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

ST REV

DESCRIPTION

SCALE AT A1: 1 : 20

5 AT_TB_01 Kilsaran 12N Thermal Block(IS EN 771-3 to system +2), appendix D of TDG L 2019 complian. Thermal conductivity 0.34W/mK. Thermal blocks to be dipped in bitumen to protect them from any moisture. To be glued together as normal using a standard 10mm sand cement mortar joint.

1

A1 06

4

A1 06

Longitudinal Section B-B

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

McNamee B C22443836

DRAWING NUMBER: Project

Originator Volume

(Revit Sheet Number) Level

Type

h

TDS2 - PRO5 - ZZ - ZZ - M3 STATUS:

3

17/05/2023 16:25:23 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

CHK: BMN

1-20 Longitudinal Section B-B

REFER: A1 01 SCALE: 1 : 20

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

DATE

DRAWING TITLE:

rt No

AT_BW_03 100mmX215mmX440mm 15N kilsaran concrete block to be used in a staggered rising wall with a total wide of 325mm. A 15mm sand cement mortar joint needs to be used on the blocks on flat to keep the rising wall level all the way up the the cavity wall build up.

3

Role - Number

AT 004 REV:

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

2

20

20 30

210

30

150

I-Beam To Stairs Junction Detail @ 1-10 1 : 10

9

GL To Stairs Junction Detail @ 1-10 1 : 10

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal AT_BW_03 conductivity 0.9-1.0W/mK. 50mm service cavity, 100mmX215mmX440mm 15N kilsaran concrete block 44mmX44mm earten radiata treated timber battens to be used in aflamable staggered rising with a 12.5mm total wide which are non and SCSwall certified. of 325mm.

A 15mm sand cement mortar joint needs gyproc moisture resistant plasterboard(A2-s1, d0(B1)to be used on the blocks on flat to keep the thermal rising wall reaction to fire), EN 520:2004+A1:2009, level all the way up the the wallskim buildcoat. up. 1mm conductivity 0.25W/mK withcavity a 3mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

330

300

330

AT_BW_03 100mmX215mmX440mm 15N kilsaran concrete block to be used in a staggered rising wall with a total wide of 325mm. A 15mm sand cement mortar joint needs to be used on the blocks on flat to keep the rising wall level all the way up the the cavity wall build up.

300

900

900

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

Foundation to Ground Level Detail @ 1-10 1 : 10

8

External Door Threshold Detail @ 1-10 1 : 10

AT_NP_01 Sabrefix hand nail plates, galvanised DX275 150mmX75mm @1mm thickness, install at all timber joinery in the roof.

AT_SR_01 Berona Std black 600mmX300mm double lapped natural slate roof finish @ 6mm thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

AT_SR_01 Berona Std Black 600mmX300mm Double Lapped Natural Slate Roof Finish @ 6mm Thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

1

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

B

AT_G_01 PVC floplast half round gutter 115mmX3m. (EN 607, KM 501316) to be fixed to the brickwook every 2000mm max. The downward slope of the gutter should be at 1:350 from right to left(East to West)

2030 100

AT_AI_01 Knauf Earthwool Insulation Loftroll 100mmX6.84m2.

Thermal conductivity of 0.044 W/mK and R Value of 4.50 M2K/W. Non-combustible A1 Euroclass Reaction to Fire classification. 200mm of insulation to be installed under and over the bottom boom of the trusses

370 270

50

50

100 100

130

100

50

50 50

CLIENT:

130

100

50

100

AT_DPC_L_01 Capital Valley Damp Proof Course(BS EN 14909+ BS 6515), (ISO 9001, 14001), vertical compression load 25N/mm2. Size to be used 30mmX450mm

200

130

160

AT_WIN_01 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operational forces PN EN 13115 to class1 )

AT_D_01 1000mmx2145mm senator entrance door made from composite U-Value of 0.8W/mK, muffles sound by 38Db (water tightness PN EN 12208 to class 9A)(operational forces PN EN 13115 to class 1)

4

External Window Head Detail @ 1-10 1 : 10

17/05/2023 16:25:25 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

100

130

100

50

AT_DPC_WS_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2 to be wrapped under the window sill and fixed and tapped behind the window frame AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

5

External Window Sill Detail @ 1-10 1 : 10

50

3

40

N

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

6

2000

5000

SCALE: 1:100

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

AT_DPC_WJ_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2 to be tapped onto the inner leaf brickwook and sized at 150mm and tapped at joints if anyway and lapped

External Window Jamb Detail @ 1-10 1 : 10

1000

AT_Win_01_ 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operationalforces PN-EN 13115 to class 1)

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

AT_SL_01 Keystone Insulated thermally broken Pressed Steel Lintel HD/K-110, sizes for front door and all windows is 125mm and for the sliding back door will be 195mm, PSi Value 0.03-0.06

AT_SL_01 Keystone Insulated thermally broken Pressed Steel Lintel HD/K-110, sizes for front door and all windows is 125mm and for the sliding back door will be 195mm, PSi Value 0.03-0.06

External Door Head Detail @ 1-10

210

10

AT_IWS_01 Passive Sill Insulated Window Sill. Code P21(225mmX150mm) NSAI Approved Thermal Modeller (ISO 9001), (EPD+BBA certified) To be fitted onto brick or block outer leaf with a 10mm sand cement mortar joint below and sealed at the window opening after the windows are fixed and sealed into place to prevent water damage and leakage into the cavity.

100

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

AT_Win_01_ 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operationalforces PN-EN 13115 to class 1)

130

100

60

50

130

1 : 10

0

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

80

100

NORTH:

AT_RWP_01 Floplast rain water downpipe 68mm calculated using, mean annual rainfall in mm x area in m² x runoff factor = collected rainwater in litres. (EN 12200, KM 501316)

100

130

50

7

AT_WIN_01 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operationalforces PN-EN 13115 to class 1)

3 3

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

SCALE BAR:

2 A1 02

100

3

Verge Detail @ 1-10

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

70

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

NOT TO SCALE

280

12

AT_AI_01 Knauf Earthwool Insulation Loftroll 100mmX6.84m2.

Thermal conductivity of 0.044 W/mK and R Value of 4.50 M2K/W. Non-combustible A1 Euroclass Reaction to Fire classification. 200mm of insulation to be installed under and over the bottom boom of the trusses

KEY PLAN:

Back Gable 3D View

1 : 10

1 : 10

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

180

11

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

3

Front Gable 3D View

Pitched Roof Flush Eaves Detail @ 1-10

AT_DPC_L_01 Capital Valley Damp Proof Course(BS EN 14909+ BS 6515), (ISO 9001, 14001), vertical compression load 25N/mm2. Size to be used 30mmX450mm

ARCHITECT:

30

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

Proposed Planning Kelly's Avenue

AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

50

AT_EW_01 Front Gable Cavity Wall. 100mm kingscourt borwn smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, forst resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity.

44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK.

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

140

100 30

0 22

AT_DPC_WP_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2 to be wrapped under concrete block are tapped at joint

2

130

PROJECT:

AT_FB_02 75mmX125mm Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door.

50

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

AT_FB_02 75mmX125mm Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door.

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

230

10

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

1

40

50

50

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

NOTES:

AT_TB_01 Kilsaran 12N Thermal Block(IS EN 771-3 to system +2), appendix D of TDG L 2019 complian. Thermal conductivity 0.34W/mK. Thermal blocks to be dipped in bitumen to protect them from any moisture. To be glued together as normal using a standard 10mm sand cement mortar joint.

130

50 50 50 40

60

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

10

20 30

AT_SW_01 Treated timber stairs with wedges underneat the threads and risers to stop any squeaking when under any load.

150

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

AT_SW_01 Treated timber stairs with wedges underneat the threads and risers to stop any squeaking when under any load.

270 20

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

150

120

50

3

150

10

AT_J_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400 c/c. (BBA, CE2, EUTR compliant with 60 minute fire rating.

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

50

50

20

100

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

20

130

AT_UC_01 QH steel I-beam 203mmX203mmX46mm. Compliant with(JIS, ASTM, GB, BS).

50

30 100

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

120

1

150

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

ST REV

DESCRIPTION

SCALE AT A1: 1 : 10

DATE CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

McNamee B C22443836 DRAWING TITLE:

1-10 Technical Details DRAWING NUMBER: Project

Originator Volume

(Revit Sheet Number) Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 STATUS:

3

Role - Number

AT 005 REV:

NOTES:

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

3

210

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

1

30

130

100

130

100

50

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

150

40

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

AT_RB_01 Monarflex radon barrier(EN 13967:2012 type A and T).

NSAI certified. Jointing, to form joints between adjacent sheets of lap the membrane by a minimum of 150mm and seal with a strip of 30mm wide tape

50

120

150

50

40

10

AT_TB_01 Kilsaran 12N Thermal Block(IS EN 771-3 to system +2), appendix D of TDG L 2019 complian. Thermal conductivity 0.34W/mK. Thermal blocks to be dipped in bitumen to protect them from any moisture. To be glued together as normal using a standard 10mm sand cement mortar joint.

50 AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

50

150

50

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

230

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% AT_BW_03 compression. 100mm kilsaran concrete block(ISblock EN 100mmX215mmX440mm 15N kilsaran concrete 15167-1, 934, 12620, thermal to197-1, be used in a staggered rising 1008) wall with a total wide 0.9-1.0W/mK. 50mmmortar service cavity, ofconductivity 325mm. A 15mm sand cement joint needs to eartenon radiata timber be44mmX44mm used on the blocks flat totreated keep the risingbattens wall which are way non up flamable SCS certified.

12.5mm level all the the theand cavity wall build up. gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

330

PROJECT:

Proposed Planning Kelly's Avenue

AT_BW_03 100mmX215mmX440mm 15N kilsaran concrete block to be used in a staggered rising wall with a total wide of 325mm. A 15mm sand cement mortar joint needs to be used on the blocks on flat to keep the rising wall level all the way up the the cavity wall build up.

ARCHITECT:

330

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

300

AT_FD1 900x300mm IBEC Concrete cast in situ foundation pad. 400mm Mesh With 50mm Cover On The Bottom.

Bottom Of Foundation To Be Min 625mm Below Ground Level.

300

CLIENT:

900

1

900

External Door Threshold Detail @ 1-5

Front Gable 3D View 2

6

REFER: A1 04 SCALE: 1 : 5

5

SCALE:

KEY PLAN:

NOT TO SCALE

SCALE BAR:

NORTH:

Foundation to Ground Level Detail @ 1-5 REFER: A1 04 SCALE: 1 : 5

2 A1 02

2

N

0

100

AT_GF_01 10mm avoca oak enginnered treated timber floor planks can be nailed. Solid wood floors up to 150mm width can be glued down. 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 150mm cast in situ concrete floor ground bearing slab. 150mm kingspan thermafloor TF70 XPS insulation( Euroclass F reaction to fire) thermal conductivity 0.022W/mK, NSAI certified with 140 kPa @ 10% compression.

50mm IGOE international sand screed. 225mm landscapedepot compressed hardcore. U-Value 0.143W/mK

40

2

GL To Stairs Junction Detail @ 1-5 REFER: A1 04 SCALE: 1 : 5

3

17/05/2023 16:25:26 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

External Window Jamb Detail @ 1-5 REFER: A1 01 SCALE: 1 : 5

AT_Win_01_ 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operationalforces PN-EN 13115 to class 1)

AT_UC_01 QH steel I-beam 203mmX203mmX46mm. Compliant with(JIS, ASTM, GB, BS).

20

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

AT_J_01 Sawn whitewood carcassing C18 treated timber joists 225mmX44mm at max 400 c/c. (BBA, CE2, EUTR compliant with 60 minute fire rating.

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

AT_FB_01 Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door. To be placed inbetween the window sill and thermal block as shown and the inner sill to be placed on top of the fire break.

20 AT_SW_01 Treated timber stairs with wedges underneat the threads and risers to stop any squeaking when under any load.

60

AT_DPC_WJ_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2 to be tapped onto the inner leaf brickwook and sized at 150mm and tapped at joints if anyway and lapped

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

ST REV

DESCRIPTION

SCALE AT A1: 1:5

DATE CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

McNamee B C22443836

50

100 50

130

AT_F_04 8mm soundbarricade foam underlay(IIC 68,69) (STC 63) (Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

170

10 150

20

20 30

180

270

70

AT_SW_01 Treated timber stairs with wedges underneat the threads and risers to stop any squeaking when under any load.

270

20 30

280

20

50

50

3

5000

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

30

AT_S_01 Timber Stairs with 13 risers each at 193mm and 14 threads at 230mm Pitch @38 Degrees

50

2000

SCALE: 1:100

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

120

10

1000

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

DRAWING TITLE:

1-5 Technical Details Sheet 1 DRAWING NUMBER: Project

Originator Volume

(Revit Sheet Number) Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 -

4

I beam To Stairs Junction Detail @ 1-5 REFER: A1 04 SCALE: 1 : 5

STATUS:

3

Role - Number

AT 006 REV:

NOTES:

1

AT_SR_01 Berona Std Black 600mmX300mm Double Lapped Natural Slate Roof Finish @ 6mm Thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

AT_NP_01 Sabrefix hand nail plates, galvanised DX275 150mmX75mm @1mm thickness, install at all timber joinery in the roof.

50

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

AT_FB_02 75mmX125mm Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door.

20 30

100

130

100

30

140

80

AT_SR_01 Berona Std black 600mmX300mm double lapped natural slate roof finish @ 6mm thickness, slates may come in any thickness between 5mm and 10mm with the overall average being 6mm thickness. Set out first course @225mm Min, set out second course @345mm Min. Set out first course 50mm from the valley gutter. Battens to be set out every 253mm.

B

AT_BM_01 Kingspan nilvent-breathable membrane for ventilated pitched roofs. Code A1-1481. Size 1.5mX50m-75m2.

Water vapour resisivity=0.17MN,S/g.m. Fire rating class B2. To be placed under counter battens and ensure there is a drap when instaling.

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

AT_G_01 PVC floplast half round gutter 115mmX3m. (EN 607, KM 501316) to be fixed to the brickwook every 2000mm max. The downward slope of the gutter should be at 1:350 from right to left(East to West)

0 22

370

110 AT_RT_01 DTE Pitched Roof C18 Timber Roof Truss 44mmX175mm, Starting 50mm From Block Work, Span 5580mm, Pitch 35*, Int And Bttm Boom Depth Is 100mm @ Max 600 c/c. Diagonal bracing 25mmX50mm and to be no more than 3600mm long if so needs to be lapped. Apex bracing to be lapped in the middle and must cover a min of two trusses to meet min stability requirements. Sabrefix nail plates, galvanised DX275, 150mmX75mm @1mm thickness, to be used at timber joinery with the roof where applicable.

AT_AI_01 Knauf Earthwool Insulation Loftroll 100mmX6.84m2.

Thermal conductivity of 0.044 W/mK and R Value of 4.50 M2K/W. Non-combustible A1 Euroclass Reaction to Fire classification. 200mm of insulation to be installed under and over the bottom boom of the trusses

50

270

150 30

AT_FB_02 75mmX125mm Kingspan Thermabate Fire Break Cavity Closer, Certified to BES 6001, Thermal conductivity of 0.034 W/mK. Used at every window and door.

50

100

50

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

AT_DPC_WP_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2 to be wrapped under concrete block are tapped at joint

100

130

100

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

50

AT_AI_01 Knauf Earthwool Insulation Loftroll 100mmX6.84m2.

Thermal conductivity of 0.044 W/mK and R Value of 4.50 M2K/W. Non-combustible A1 Euroclass Reaction to Fire classification. 200mm of insulation to be installed under and over the bottom boom of the trusses

50

30

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape AT_RWP_01 Floplast rain water downpipe 68mm calculated using, mean annual rainfall in mm x area in m² x runoff factor = collected rainwater in litres. (EN 12200, KM 501316)

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

AT_IW_04 Floplast push fit single sock SVP 100mmX3m (EN 1329-1, KM 544331). Boxed within a 120mmX120mm partition wall. SPV to be a min of 1500mm above valley gutter level and sealed both on the inner and outer face of the roof to prevent water damage.

1

Verge Detail @ 1-5

6

REFER: A1 04 SCALE: 1 : 5

Proposed Planning Kelly's Avenue

ARCHITECT:

AT_EW_01 Front Gable Cavity Wall. 100mm kingscourt borwn smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, forst resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity.

44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK.

AT_C_01 12.5mm Gyproc Moisture Resistant Plasterboard, board size of 1200mmX2400mm. ( A2-s1, D0(B1) reaction to fire. EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK, with a 3mm skim coat. 1mm dulux white emulsion paint.

50

PROJECT:

Back Gable 3D View 2

5

SCALE:

CLIENT:

Pitched Roof Flush Eaves Detail @ 1-5 SCALE: 1 : 5

KEY PLAN:

NOT TO SCALE

SCALE BAR:

NORTH:

3

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

3

3 240 AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

100

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

130 30

50

AT_SL_01 Keystone Insulated thermally broken Pressed Steel Lintel HD/K-110, sizes for front door and all windows is 125mm and for the sliding back door will be 195mm, PSi Value 0.03-0.06

2

REFER: A1 04 SCALE: 1 : 5

130

100

AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

80

100

3

100

130

160

AT_DPC_L_01 Capital Valley Damp Proof Course(BS EN 14909+ BS 6515), (ISO 9001, 14001), vertical compression load 25N/mm2. Size to be used 30mmX450mm AT_SL_01 Keystone Insulated thermally broken Pressed Steel Lintel HD/K-110, sizes for front door and all windows is 125mm and for the sliding back door will be 195mm, PSi Value 0.03-0.06

5000

SCALE: 1:100

ST REV

DESCRIPTION

SCALE AT A1: 1:5

DATE CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

McNamee B C22443836

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity

AT_WIN_01 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operational forces PN EN 13115 to class1 )

4

External Window Head Detail @ 1-5 REFER: A1 04 SCALE: 1 : 5

1-5 Technical Details Sheet 2 DRAWING NUMBER: Project

Originator Volume

(Revit Sheet Number) Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 STATUS:

3

17/05/2023 16:25:28 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

2000

DRAWING TITLE:

100

External Window Sill Detail @ 1-5 REFER: A1 04 SCALE: 1 : 5

210

1000

AT_WT_01 Wall ties BS EN 845-1 : 2013, installed level or with a slight fall to the outer leaf. Manufactured from pultruded basalt fibres. This material has a thermal conductivity of only 0.7W/mK, wall tie embedment of between 62.5mm and 75mm in each leaf should be used at not less than 2.5 per sqaure metre (900mm horizontal x 450mm vertical c/c, openings additional ties should be used at a rate of one per 300mm height, located not more than 225mm from the edge, 225mm standard spacing for cavity brickwork 900mm x 450mm c/c in a staggered pattern( 2.5 ties per square metre).

Wall tie clip hold insulation against the inside leaf and to maintain a cavity AT_ATM_01 PHS Astra Vapour Control Membrane, reaction to fire class E. Temperature resistant -40C/+100C. (EN 13984(EN1928 method A). To be tapped using variobond air tight tape, item code 21213, 100mm wide tape

AT_F_05 18mm plywood(EN 13986:2004). 8mm soundbarricade foam underlay(IIC 68, 69)(STC 63)(Delta 25). 10mm enginnered oak treated timber 353 can be nailed down. Solid wood floors up to 160mm in width can be glued down.

AT_D_01 1000mmx2145mm senator entrance door made from composite U-Value of 0.8W/mK, muffles sound by 38Db (water tightness PN EN 12208 to class 9A)(operational forces PN EN 13115 to class 1)

External Door Head Detail @ 1-5

100

AT_DPC_WS_01 Capital Valley Damp Proof Course(BS EN14909+ BS 6515), (ISO 9001, 14001), vertical compressive load 25N/mm2 to be wrapped under the window sill and fixed and tapped behind the window frame

60

130

50

AT_IWS_01 Passive Sill Insulated Window Sill. Code P21(225mmX150mm) NSAI Approved Thermal Modeller (ISO 9001), (EPD+BBA certified) To be fitted onto brick or block outer leaf with a 10mm sand cement mortar joint below and sealed at the window opening after the windows are fixed and sealed into place to prevent water damage and leakage into the cavity.

AT_DPC_L_01 Capital Valley Damp Proof Course(BS EN 14909+ BS 6515), (ISO 9001, 14001), vertical compression load 25N/mm2. Size to be used 30mmX450mm

200

AT_WIN_01 1925mmX1270mm side hung guided PVC double glazed window by okno. WT2014:Uw=1.3W/m2K, Muffles sound by47Db(Wind load resistance PN-EN 1221 to class B5), (Water tightness PN-EN 12208 to class 9A), (Air permeability PN-EN 12207 to class 4), (Operationalforces PN-EN 13115 to class 1)

70

130

80 10

100

130

160

50

140

N

0

Role - Number

AT 007 REV:

NOTES:

Unit of 3 Dwellings 2 Stories High

Unit of 3 Dwelling 2 Stories High Unit of 4 Dwellings 2 Stories High

Abandoned Building 3 Stories High

Site Plan Services Legend Low Pressure Gas Line O.K=1.2

Protected Building 2 Stories High

Gas Valve

Cover Level

C

590

Standard Inlet

1890

600

1120

220

1320

25mm MDPE

Water Distribution Mains Water Services Connections

4590

4140

Unit of 2 Dwellings 2 Stories High

Man Hole Cover

3430

Sewer Mains Gravity Combined C=0.75

O.K=2.0

O.K=1.6

Surface Water Gravity Mains

160mm HPPE, 2012

O.K=1.2

O.K=1.2

10290

O.K=1.3

10690

6500

Overhead Electrical Wires

7500

Broadband Overhead Wires

PROJECT:

Proposed Planning Kelly's Avenue

ARCHITECT:

Dwelling 2 Stories High

Unit of 3 Dwellings 2 Stories High

rt No

Unit of 4 Dwellings 2 Stories High

CLIENT:

h

Services Site Plan

1

REFER: A1 02 SCALE: 1 : 200

2 A1 02

2 A1 02

2 A1 02 KEY PLAN:

NOT TO SCALE

SCALE BAR:

NORTH:

6 Bathrom 4 m²

5 Master Bedroom

3 Living Room

11 m²

22 m²

N

0

1000

2000

5000

Dwellings Services Legend SCALE: 1:100 Water Mains Supply

1 A1 02

2 WC

1 A1 02

1 A1 02

2 m²

Gas Supply

14 Cold Water Supply

13

8 Storage

12 Hot Water Supply

11 10

1 m²

9

Foul Water

8

ST REV

7 6

Hot Flow For Radiators

SCALE AT A1: As indicated

Electrical Wires

DRAWING SERIES:

5

C

UP

UP

4 3

9 Bedroom 2 11 m²

4 Kitchen

1 Entrance Hall

7 m²

10 m²

DESCRIPTION

DATE

Cold Return From Radiators

CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

McNamee B C22443836 DRAWING TITLE:

7 Landing

Services Plan

13 m²

DRAWING NUMBER: Project

Originator Volume

(Revit Sheet Number) Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 -

2

0 Ground FFL Service Plan REFER: A1 02 SCALE: 1 : 50

3

1 First FFL Service Plan SCALE: 1 : 50

17/05/2023 16:25:35 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

4

1 Wallplate Service Plan REFER: A1 02 SCALE: 1 : 50

STATUS:

3

Role - Number

AT 008 REV:

NOTES:

A

B

AT_SP_01 Solarworld AG, code SR0506, IFC classification-energy conversion device, UNSPSC code 26131507

1060

1060

AT_FF_01 15x55 Aluminum Anodized Bronze Flush Fascia item code ES100

AT_VG_01 Lead for valley gutter 390mm and comes in a 3m long roll. Joints should be fixed at intervals conforming to lead sheet association guidelines. Manufactured to BS EN 12588 code 5. Fixing clips are required for securing free edges of lead sheet against wind lift.

Stainless steel clips 300mmx50mm0.4mm. Valley to be sloped from the centre going from centre to left and centre to right with a fall of 1:40 to ensure appropraiate drainage.18mm plywood should be placed under the roof membrane and lead valley gutter. To be fixed onto counter battens closest to the fire break in the valley.

OSB board to be used. Sheet size is 285mmX18mm @ 2.m long

1 Wallplate

2

5.400 m

1 FF Ceiling

-

1950

7590

AT_W_01

1950

5.335 m

AT_W_01

AT_RWP_01 Floplast rain water downpipe 68mm calculated using, mean annual rainfall in mm x area in m² x runoff factor = collected rainwater in litres. (EN 12200, KM 501316)

AT_EW_01 Front Gable Cavity Wall. 100mm Kingscourt brown smooth brick(ISO 9001:2015 and CE certified).

Reaction to fire class A1, frost resistant F2. 125mm cavity. 115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa at 10% compression. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earten radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, d0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first brick corse.

U-Value of 0.12W/mK

1 1SFL

-

2.670 m

0 GF Ceiling

-

AT_W_01

AT_D_01

AT_W_02

2040

1950

2.430 m

150

0 Ground FFL

0

0.000 m

Unit of 3 Dwellings 2 Stories High

1350

1

2.700 m

830

760

1 First FFL

5

3

0 98

South Elevation PROJECT:

SCALE: 1 : 50

Unit of 3 Dwelling 2 Stories High

Proposed Planning Kelly's Avenue

Unit of 4 Dwellings 2 Stories High

8120

7820

Abandoned Building 3 Stories High

7450

7220

ARCHITECT:

5690 4380

60 44

Protected Building 2 Stories High

CLIENT: 2950

8670

5690 900 2260

2750

2130

1700 1660

Unit of 2 Dwellings 2 Stories High

B

A

KEY PLAN:

NOT TO SCALE

SCALE BAR:

NORTH:

24140

AT_FF_01 15x55 Aluminum Anodized Bronze Flush Fascia item code ES100

AT_SP_01 Solarworld AG, code SR0506, IFC classification-energy conversion device, UNSPSC code 26131507

1270

1 Wallplate 70

Dwelling 2 Stories High

AT_RWP_01 Floplast rain water downpipe 68mm calculated using, mean annual rainfall in mm x area in m² x runoff factor = collected rainwater in litres. (EN 12200, KM 501316)

AT_W_04

1 First FFL

-

1000

2000

5000

SCALE: 1:100

1

2.700 m

1 1SFL

-

2.670 m

AT_D_02

2760

0 GF Ceiling 2190

AT_EW_02 Rear Gable cavity wall. 20mm Kilsaran KPRO Crete Sand Cement Render. 100mm kilsaran concrete block(IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 125mm cavity.

115mm kingspan greenguard XPS insulation(Euroclass F reaction to fire) thermal conductivity 0.036W/mK, 500 kPa 10% compression.

100mm kilsaran concrete block( IS EN 197-1, 15167-1, 934, 12620, 1008) thermal conductivity 0.9-1.0W/mK. 50mm service cavity, 44mmX44mm earthen radiata treated timber battens which are non flamable and SCS certified. 12.5mm gyproc moisture resistant plasterboard(A2-s1, D0(B1) reaction to fire), EN 520:2004+A1:2009, thermal conductivity of 0.25W/mK with a 3mm skim coat. 1mm dulux white emulsion paint. DPC at first block corse. U-Value of 0.12W/mK

N

0

2100

1750

1950

AT_W_03

AT_VG_01 Lead for valley gutter 390mm and comes in a 3m long roll. Joints should be fixed at intervals conforming to lead sheet association guidelines. Manufactured to BS EN 12588 code 5. Fixing clips are required for securing free edges of lead sheet against wind lift.

Stainless steel clips 300mmx50mm0.4mm. Valley to be sloped from the centre going from centre to left and centre to right with a fall of 1:40 to ensure appropraiate drainage.18mm plywood should be placed under the roof membrane and lead valley gutter. To be fixed onto counter battens closest to the fire break in the valley.

OSB board to be used. Sheet size is 285mmX18mm @ 2.m long

Unit of 4 Dwellings 2 Stories High

1 FF Ceiling 5.335 m

2860

Unit of 3 Dwellings 2 Stories High

2

5.400 m

-

2.430 m

ST REV

DESCRIPTION

SCALE AT A1: As indicated

DATE CHK: BMN

APP: BMN

DES: BMN

DRW: BMN

DRAWING SERIES:

0 Ground FFL 0.000 m

0

McNamee B C22443836 DRAWING TITLE:

Site Plan & Elevations DRAWING NUMBER:

1

Site REFER: A1 02 SCALE: 1 : 200

2

North Elevation

Project

Level

Type

TDS2 - PRO5 - ZZ - ZZ - M3 SCALE: 1 : 50

STATUS:

3

17/05/2023 16:25:53 C:\Users\bmcna\OneDrive\Documents\Architectural Technology TU831-1\Tech1203 BIM Primary Building Elements\Projects\Revit Files\Assignment 2\McNamee_B_TECH1203_BIM_S2_P1_TDS House.rvt

Originator Volume

(Revit Sheet Number) Role - Number

AT 009 REV: