The Basics of Solar Panel Installation

The Basics of Solar Panel Installation

Solar panels help in the production of electricity from the sun’s radiation or energy which falls on it so as to generate solar energy out of it. The solar energy is originated through the thermonuclear fusion reactions that occur within the sun where the earth receives 47% of it, and only this amount of the energy received is used.

Solar panels are made up of the same component as the one which is required by the computersand is pure silicon. Due to the presence of the Photovoltaic cells on the panel, they are capable of converting the 47% of solar energy into electricity. The presence of a simple wafer of silicon along with the wires is attached to the solar panel so as to generate both p-type and n-type currents.

The battery is very important component required along with the solar panel as it helps in storing the electricity generated by the panels making sure that the electricity can be used during cases of no sunlight, heavy snowfall and rainfall.

Each and every part of the panel is designed in such a manner that it does not get spoilt easily and can be used for more than 20 – 30 years.

Residential Solar Panel installation in a proper manner is very important because these panels are the ones which will help in the generation of electricity and therefore if they are not placed in a proper manner then it will not work.

So basic steps that are required for the residential solar panel installation are:

1. Make sure to position the solar panel in direct sunlight, because it is only the sunlight which will fall on it and generate electricity by converting the solar energy produced through fusion.

2. Make a rough sketch of the terrace, because the panel has to fit there and before the installation it is very important that you have a plan for you.

3. If unable to install then do contact to the specialised person for the same as he will guide you through all the steps required for the process of installation.

4. After mounting the panel make use of the wire so as to mould the solar panels and also be careful with the complete understanding of wiring.

5. Once the panel is mounted and moulded, the next step is the connection of the cables with the control panel.

6. Now it is time to finish up with the electrical connections inside the house or the industry along with the panel which is present on the terrace of the building.

All these basic instructions are very important for the person who wants a solar panel for himself or herself as they can enjoy the mode of electricity by using it for long without worrying about the electricity bills which tends to give shock after every month making them tensed and hence they need to cut down the same.

Solar panels are not only cheap on electricity cost, but they are also eco-friendly as they don’t harm the environment with kind of smoke or pollution making the nature beautiful in its natural way.

Website: http://bluesolar.com.au/ Country: Australia

Company Email: info@bluesolar.com.au Telephone: +61 3 9229 3883