Blue Print Tool Range booklet

Specialist Tools

www.blue-print.com Blue Print is a bilstein group brand

Tool Guide Needing a specific tool for particular jobs is becoming more and more common in modern vehicle servicing and repair.

Blue Print are identifying these tools and adding them to range. Unlike ‘tool only’ catalogues, Blue Print clearly lists each tool next to the vehicle and part that it’s intended to be used with, along with a description and usage instructions where necessary, thus informing you a tool is required and available BEFORE a job is started.

We feel that the tools in our range are an essential requirement for any repairer working on common Asian and American vehicles. Due to high demand we have also created a new kit (BPPK010) which includes the most popular tools we currently have to offer. These tools can also be purchased separately and are all listed against the relevant parts in Blue Print LIVE! For more information see Blue Print LIVE! - www.blue-print.com/bpl

ADA105501

ADC45501

Chrysler Engine Timing and Locking Kit

Tensioner Pin Set

Engine timing and locking tool kit for the 2.5 and 2.8 CRD (common rail diesel) engines fitted to Chrysler applications.

These tools help adjust the tension of the timing belt after the belt has been fitted – for use with Mitsubishi and also a selection of Hyundai, Kia and Proton engine applications.

ADC45502

ADG05501/2

GEN 2 Wheel Bearing Tool

12mm & 18mm Oxygen Sensor Thread Chasers Used for repairing and cleaning threads on oxygen sensor ports.

ADG05501 – 12mm Nissan Primera and 100NX

This is an essential tool for removing and installing ‘Generation 2’ type wheel bearings on the Mitsubishi Colt and Smart ForFour 2004> due to the need to remove and replace the whole drive flange assembly.

ADG05502 – 18mm Over 1,450 applications

ADG05503

ADG05504

Puller for Ribbed Drive Pulleys

BMW MINI Bush Replacement Tool

This tool is essential for the fast and effective removal of all multi-ribbed pulleys with a diameter of 35mm > 165mm.

This tool allows the front suspension arm bushes (Blue Print part number ADG080146) to be removed and installed in situ quickly and effectively, dramatically reducing the amount of time required to carry out the repair on the Mini One/Cooper.

ADG05505/6

ADG05507

Alternator Pulley Tools

SAC Removal & Replacement Tool

The replacement of an Overrunning Alternator Pulley (OAP) requires a special tool to safely hold/lock the alternator shaft, enabling the pulley to be loosened. Attempting replacement without the correct tool is highly likely to result in damage to the pulley and/or the alternator.

ADG05505 Torx 50 1/2”D

ADG05506 M10 Spline 1/2”D

Blue Print’s Self-Adjusting Clutch Tool (SAC) is an essential piece of equipment to ensure correct installation of a self-adjusting type clutch. Any counteracting forces applied to a SAC during installation could result in accidental rotation of the adjusting ring, resulting in an incorrectly adjusted clutch.

ADG05508

ADG05511

JTD Camshaft Sprocket Wrench

Glow Plug Reamer

This is a multi application wrench with variable adjustment, for holding the camshaft sprocket whilst releasing the securing nut or bolt on 1.3 JTD engine applications.

Glow Plug aperture cleaner to suit engines using M10 x 1 and M10 x1.25 threaded glow plugs. Designed to remove carbon build up from the aperture where the heater element sits, without the need to remove the cylinder head on diesel applications.

Tool Guide

continued...

ADG05512/13/14/20 Glow Plug Sockets Extra long 8mm, 9mm, 10mm and 12mm glow plug sockets designed to grip and extract the glow plugs on all applicable vehicles.

ADG05512 – 8mm

ADG05513 – 10mm

ADG05520 – 9mm

ADG05514 – 12mm

ADG05515

ADG05518

Torque Wrench (low torque)

Glow Plug Socket - 12mm

Low range torque wrench, 1/4” drive with 5>25Nm range, suitable for all low torque requirements e.g. glow plugs – comes complete with 1/4”- 3/8” adaptor.

This solution combines a 12mm deep socket with a reinforced adapter enabling the removal of glow plugs in very difficult to access locations.

ADG05517

ADG05516

Stretch Belt Tool

Cape Chisel

This tool is used when removing and replacing the ‘stretch type’ auxiliary belt on Mazda and Ford applications, including the Fiesta and Mazda 2.

This tool is used when fitting a ‘stake type’ nut on jobs such as a wheel bearing replacement.

ADG05519

ADG05521

Mini Oil Filter Removal Tool

Oil Filter Removal Tool

Due to the propensity of the aluminium oil filter housing to seize or become damaged during removal, this tool is essential for replacing the oil filter (Blue Print part number ADG02124) on the Mini Cooper, Cooper S and One 2001>2006, quickly and efficiently, without damaging it. It is also necessary for replacing the oil filter on VAG 1.9 (ASY) engines, Ford and Jaguar 2.2D, Mercedes Benz Vito, Ford Dura Torque diesel engines and the new Transit vans.

ADG05525 Land Rover 52mm Air Impact Deep Hub Nut Socket This 52mm Impact Deep Socket is an essential tool to loosen and tighten the lock nuts and hub nuts when changing front or rear wheel bearings. In order to prevent premature bearing failure the setting process must be carried out correctly. Adjusting bearing end float requires a specific order when replacing the washers and nuts and torqued to the correct settings.

This tool is necessary for removing the oil filter (Blue Print part number ADV182107) on Audi, SEAT, Skoda and Volkswagen, petrol and diesel applications.

ADG05528 Diesel Fuel System Bleeder Kit Although most vehicles are self-bleeding or have a permanent hand pump fitted, problems can still arise while changing fuel filters on diesel systems.

Blue Print’s fuel system bleeding kit (ADG05528) comes with a range of adaptors suitable for various vehicles and bleeds systems far more quickly and comprehensively.

Linked to: ADJ138209 - Front Wheel Bearing Kit

Linked to: ADJ132305, ADM52325, ADM52338 ADM52339, ADM52343 - Fuel Filters

ADJ135501

ADJ135502

Land Rover Timing & Engine Locking Tool Kit

Land Rover & Jaguar Oil Filter Removal Tool

This combination set contains all the relevant parts necessary to lock the camshaft sprocket and flywheel in order to set the valve timing and/or change the timing belt; it also comes with the flywheel timing pin. This kit is necessary when working on Land Rover Freelander 2 and the TD4 2.2 Duratorq TDCi engine 2006>.

Linked to: ADC47554 - Timing Belt

This tool makes the removal of the paper element oil filter (ADJ132102) quick and easy without causing damage to the housing. The filter is recessed making it very awkward to change.

Tool Guide

continued...

ADH25501

ADH25502

Honda Locking Pin Screw

Honda Trailing Arm Bush Replacement Tool

This locking pin screw is necessary to correctly align the balancer shaft when replacing the timing and balancer shaft belts on Honda engine applications.

This bush replacement tool is required to remove and replace the rear trailing arm bushes (Blue Print part number ADH28020) on the Honda Civic/CR-V, without causing damage to the ABS sensors.

ADK85501

ADK85502

JTD 1.3 Timing Tool Kit

JTD Fuel Filter Removal Tool Essential for replacing timing belts on the JTD engine, as used by Alfa Romeo, Fiat, Ford, Lancia, Subaru, Suzuki and Vauxhall/Opel.

This tool allows the removal of the fuel filter (Blue Print part number ADK82327), without damaging the plastic housing and securing ring, and then tightening it back up to the correct torque – for use on Alfa Romeo, Chevrolet, CitroÍn, FIAT, Lancia, Peugeot, Vauxhall/Opel, Saab and Suzuki JTD engine applications.

ADK85503

ADM55501

Wheel Bearing Socket

Mazda/Ford Timing Alignment Pin Set

This tool is essential for replacing the front wheel bearings (Blue Print part number ADK88223C) on the Suzuki Jimny 1.3i, due to the bearing being held in place with lock nut which needs this special four pin adapter to remove it.

This timing alignment pin set is required to correctly align engine timing when removing/replacing the timing belt on Mazda and Ford vehicles fitted with 1.4TDCi and 1.6TDCi engines.

ADN15501

ADN15502

Nissan Timing Alignment Locking Pin

Nissan Navara D40 Seal Fitting Tool

Fuel pump locking pin for Nissan applications including the Navara and Pathfinder fitted with YD25DDTi engines.

This fitting tool allows for easy installation of new rear axle oil seals on the Navara D40 2.5DT 2005>, 3.0DT 2010> . The oil seals are a high failure item and due to their location in the half shaft, it is incredibly difficult to replace them without it.

ADT35501

ADT35503

Toyota/Nissan Hub Nut Socket

Toyota Oil Filter Removal Tool

54mm 1/2d hub nut socket designed specifically for removing/replacing deeply recessed hub nuts on applications including the Toyota Land Cruiser and Hi-Lux. It is also essential for adjusting the free play in wheel bearings on the Toyota Land Cruiser 40-60-70-80-100 series and the Nissan Patrol Y60-GQ-MQ-MK.

This is an essential tool when removing the housing to change the oil filter (Blue Print part number ADD62109) on Toyota, Lexus and Daihatsu petrol applications.

ADT35502

ADT35504

Toyota Oil Filter Removal Tool

Toyota Oil Filter Drain Tool

This is an essential tool when removing the housing to change the oil filter (Blue Print part number ADT32118) on Toyota and Lexus D-4D diesel applications.

This tool saves time and prevents oil spillage when changing the oil filter on Toyota D-4D diesel applications. To be used with removal tool ADT35502, when replacing oil filter ADT32118.

BPPK010 Tool Case • • • • • • • • • • • • •

ADC45501 Mitsubishi / Hyundai / Kia / Proton Tensioner Pin Set ADG05501/2 12mm & 18mm Oxygen Sensor Thread Chasers ADG05505/6 Alternator Pulley Tools ADG05511 Glow Plug Reamer ADG05512/13/14 8mm, 10mm & 12mm Glow Plug Sockets ADG05516 Cape Chisel ADH25501 Honda Locking Pin Screw ADM55501 Mazda / Ford Timing Alignment Pin Set ADN15501 Nissan Timing Alignment Pin ADT35501 Toyota / Nissan Hub Nut Socket ADT35504 Toyota Oil Filter Drain Tool ADT35502 Toyota Oil Filter Removal Tool ADT35503 Toyota Oil Filter Removal Tool

All Blue Print tools are listed in Blue Print’s online catalogue - Blue Print LIVE For full application details visit www.blue-print.com/BPL If you know of any Japanese, Korean or American vehicle parts that require specific tools that you would like us to introduce to the range then email us at: sales@blue-print.com

Or alternatively let us know on Facebook or Twitter

www.blue-print.com Blue Print is a bilstein group brand