Bla cat ed 12 dept 33 final lr

33

boatinglifestyleadventure

CO

BOATING LIFESTYLE ADVENTURE

B ACT LA SA NT

S LE

S LE

As well as providing the highest quality products, B ACT LA SA BLA can provide you with a wealth of technical NT support and advice. We have a team of Product Managers and Service Technicians that can provide you with system consultations, complete configurations, schematics and general technical 13 5 0 0 2 5on 2 7 21300 252 725 to discuss advice. Call BLA your specific requirements.

776-777 778-783 784 785-788 789 790 791 792-795 796 797 798

CO

Wind Generators Marine Generators DC Generators Vehicle Generators Vehicle Generator Radiators Military Generators Parallel Generators Generator Accessories Exhaust Components Waterlocks & Goosenecks Sound Insulation

SPECIAL ORDER

13

00 252 725

ENGINE ROOM & POWER GENERATION

ENGINE ROOM & POWER GENERATION

A blue product code or the appearance of this logo indicates the product requires special ordering.

Please contact BLA on 1300 252 725 for information on these products.

bla.com.au

775

ENGINE ROOM & POWER GENERATION

33

Wind Generators Wind generators or combined wind/water generators can contribute significant renewable energy to a yacht’s DC power requirements when sailing and at anchor. It is possible to greatly reduce or even completely eliminate engine running for charging purposes in a yacht to achieve reduced engine hours and save valuable fuel when on a long voyage. Many sailors have been able to produce all their DC energy from the highly efficient Eclectic Energy® D400 and DuoGen when on coastal and ocean passages. As the power output can sometimes exceed the requirements of the boat electrical system, a regulator is required. Wind generators also have land based applications.

Eclectic Energy® Wind Generator - DuoGen The DuoGen is a combined wind and water generator with an integral tower and brackets.

This allows it to be mounted on most yachts without the need to manufacture any additional hardware. During sailing, energy production is greater in water mode whilst the wind mode is effective when at anchor. At just over 6 knots of constant boat speed, the DuoGen operating in water mode will produce 200 amp-hours in a 12 volt system per day. This power will be almost double for an increase of 2 knots in boat speed.

Features: • Combined wind and water generator • Low carbon cruising with DuoGen • Powerful water generation on passage • Quiet, smooth wind power at anchor • System weight at deck level • Changes from wind mode to water mode in seconds without the need for tools • Easily installed with mount hardware supplied • Elegant design • Tough construction with corrosion resistant materials throughout • Stainless steel mounting brackets • Available in 12V and 24V models • Self-furling protection in high winds • Air rotor dismantles for easy stowage • Rated output in water mode: 100W at 6kts; 150W at 7kts; 200W at 8kts • Minimal drag in water mode, typical boat-speed loss is less than 0.15kts • Rated output in wind mode: 40W at 10kts; 90W at 15kts; 150W at 20kts • Two year warranty 337730 Wind Mode

BLA Code 337730 337732 337734 337740 337742 337744

Description DuoGen DuoGen DuoGen DuoGen DuoGen DuoGen

Short Tower 1.3m 12V Long Tower 1.6m 12V V. Long Tower 1.85m 12V Short Tower 1.3m 24V Long Tower 1.6m 24V V. Long Tower 1.85m 24V

Overall Height mm 3570 4070 4520 3570 4070 4520

Accessories: 337720 TB12V Regulator 12V incl. load resistors 337722 TB24V Regulator 24V incl. load resistors

776

BOATING LIFESTYLE ADVENTURE

Output Watts 500 500 500 500 500 500

Water Mode

bla.com.au

33

Eclectic Energy® Wind Generator - D400

ENGINE ROOM & POWER GENERATION

The D400 wind generator is designed for battery charging in marine and terrestrial applications. It is exceptionally quiet and vibration free in operation. This innovative machine is extremely efficient in low wind speeds, yet is capable of sustained power outputs of over 500 watts in higher winds. Distinctive in design, the D400 is superbly engineered for long, trouble free operation.

Features: • Highly efficient and productive at all wind speeds • Virtually silent and vibration free in operation • Robustly constructed for a long service life • Corrosion resistant materials used throughout • Available in 12V, 24V and 48V models • Rated output 235W at 22kts; 420W at 28kts • Optional external regulator produces maximum charge to the batteries • Rotor 1.1m diameter • Turning circle 700mm • Two year warranty

337710

N.B. All performance figures are indicative.

Actual outputs may vary.

BLA Code 337710 337712

Description D400 Wind Generator 12V D400 Wind Generator 24V

Blade Diameter Turning Circle Weight Max. Output mm mm kg Watts 1100 700 17 600 1100 700 17 600

Accessories: 337720 TB12V Regulator 12V incl. load resistors 337722 TB24V Regulator 24V incl. load resistors BOATING LIFESTYLE ADVENTURE

bla.com.au

777

33

®

Fischer Panda Generators TM

ENGINE ROOM & POWER GENERATION

Compact, Lightweight and Quiet Fischer Panda® are known around the world for class-leading compact marine and vehicle diesel generators. Featuring a highly efficient water cooling system Fischer Panda® generators are renowned for being lightweight, reliable and extremely quiet.

A diverse range of performance generators ranging in output from 3.8kW to 170kW are available in configurations to suit any application.

For efficient running, Fischer Panda® utilise a highly effective cooling system to ensure temperatures within the sound capsule remain within an acceptable range even in tropical conditions. Eliminating the requirement for free flowing cooling air improves sound insulation and greatly reduces engine noise. All Fischer Panda® marine generators employ a freshwater dual circuit cooling system to cool the diesel motor and the generator. A traditional seawater heat exchanger, manufactured from high quality alloy, cools the recirculating fresh water coolant to maintain constant temperature and optimise performance. Fischer Panda® vehicle generators use an external radiator which circulates normal engine coolant.

iSeries

Super silent sound insulation Fischer Panda® marine generators up to 25kVA are supplied with a GRP (Glass-Reinforced Plastic) sound insulation capsule lined with 3D sound absorbing material. This provides a sound level that is one of the lowest decibel outputs achievable for diesel generators. Optional 4D sound insulation material is available if even lower noise level is required.

Marine generators above 25kVA are supplied with a stainless steel MPL (Metal Professional Line) sound capsule. The MPL casing consists of flat panels which are easy to dismantle and remove so that all parts of the generator can be accessed. Generators from 6.8kW can be supplied with the MPL capsule at an additional cost.

MPL stainless steel sound insulation capsule is standard for generators from 25kW

778

BOATING LIFESTYLE ADVENTURE

GRP sound insulation capsule is standard for generators up to 25kW

bla.com.au

33

Water cooled engine and alternator One of the reasons for the superior efficiency of Fischer Panda® is the very effective cooling system. It ensures that temperatures inside the sound capsule remain in an acceptable range in all conditions. At the same time, it achieves the best possible sound insulation as external cooling air flow is not required.

TM

Reliable asynchronous generators For generators above 6.5kW, Fischer Panda® utilise asynchronous alternators combined with a patented VCS (Voltage Control System) to achieve voltage precision that cannot be matched by conventional generators. The excellent performance of the Fischer Panda® asynchronous generators set a high standard and has been proven in many applications over many years.

ENGINE ROOM & POWER GENERATION

To prevent galvanic corrosion, Fischer Panda® use a dual circuit cooling system for generator and engine. The engine and generator are cooled by engine coolant. Seawater only comes into contact with the heat exchanger which is made from corrosion resistant cupronickel alloy.

Fischer Panda® asynchronous generators have no rotating coils, no diodes, produce no electrical noise and provide the highest operating protection for professional applications. This enables a lifetime warranty to be provided for the rotor which is often the most vulnerable part of other generators.

lighting

satellite receivers

air conditioners

boilers

ventilators

compressors

ovens

electric motors

Perfect sine wave Fischer Panda® asynchronous generators supply a particularly clean sine wave and have achieved the best results during numerous tests in this category. This is essential for supplying power to sensitive electronic equipment, charging equipment and computers.

AC 50Hz outputs of single phase 230V or three phase 400V, and 60Hz outputs of single phase 120/240V or three phase 208V are available.

BOATING LIFESTYLE ADVENTURE

The outstanding sine wave of the Fischer Panda® generator

bla.com.au

779

33

Fischer Panda® Marine Generator - 4000s

545mm

Features: • High starting capacity, perfect for running dive compressors and air conditioning units • Extremely compact and lightweight • Super silent sound insulation capsule • Highly effective dual circuit cooling via a cupronickel heat exchanger • Pure sine wave is ideal for sensitive electronics • Voltage stability 230Vac ± 5% • Frequency stability 50Hz ± 2Hz • Innovative design • Easy to install and maintain with all servicing and connections on one side • Electric starting • Automatically turns off under alarm states • Remote control and alarm monitoring via the included remote panel • Integrated fuel pump Exhaust Output Ø40

Fuel / Return

580mm

Control Panel / 230V AC Seawater Input Ø20

12V DC Oil Drain Hose

Expansion Tank

11

Standard Inclusions

396mm

370mm

Ø

345mm

SP33337638

545mm 24mm

580mm

Exhaust Output Ø40 Exhaust Output Ø40

580mm

11

12V DC

12V DC

Oil Drain Hose

Oil Drain Hose

Weight Sound Level Nominal Continuous Engine Engine Engine 7m/3m/1m Output Output Manufacturer Type Displacement LxWxH kg dB kW kVA kW cc 580x370x545 97 54/64/68 3.8 4 3.5 Farymann 18W430 298 370mm

396mm

Dimensions

396mm

Panda 4000s FC PMS 230V 50Hz 4kVa

Fuel / Return

Ø

370mm

337018

Expansion Tank Expansion Tank

11

Ø

Description

Fuel / Return

Control Panel / 230V AC Panel / 230V AC Control Seawater Input Ø20 Seawater Input Ø20

BLA Code

SP33337030

545mm

80mm

24mm

TM

Unlike other generator sets, the 4000s engine and windings are freshwater cooled and require no forced air inside the sound capsule making it super quiet and ideal for live-aboard vessels and running air conditioners at night.

24mm

ENGINE ROOM & POWER GENERATION

The Panda 4000s is the ideal entry level generator for vessels with small electrical requirements and limited space. The Panda 4000s sound capsule is made up of a base and two enclosed sides, all connections are pre-fitted to the base which makes the 4000s easy to install.

Engine Speed RPM 3000

Standard Inclusions: SP33337030 Cooling water expansion bottle SP33337638 Remote control and monitoring panel 80mm

80mm

55-21.03.10.046P Standard service kit 11 55-21.03.04.080S Engine mount 55-21.03.04.057S Diesel fuel filter 5 micron Marine grade diesel fuel filter 5 micron BOATING LIFESTYLE ADVENTURE

Service kit plus 20 Basic installation kit Premium installation kit

B ACT LA SA NT

S LE

780

345mm CO

345mm

Accessories: 337464 SP33337436 SP33336980 SP33336984

SPECIAL ORDER

13

00 252 725

bla.com.au

33

Fischer Panda® Marine Generator - iSeries The iSeries generators are the first of the next generation of compact, super silent and powerful generators from Fischer Panda®. Using modern diesel engines which meet the latest emission standards and variable speed technology, the operating speed is adjusted to match the load to ensure efficiency while supplying extremely stable voltage and frequency. Fischer Panda® iSeries generators are fitted with highly regarded sound insulation and water cooling. They have been especially designed to be lightweight and compact giving you up to 30% savings in weight and space.

TM

337056

337042

H

19

H

19

L elektrische Anschlüsse

337019

L

wasser ein elektrische Anschlüsse

Standard Inclusions

asser ein

ENGINE ROOM & POWER GENERATION

Features: • Parallel connection of two iSeries generators of the same model; refer to page 791 • Load dependent variable speed technology: 2200-2800RPM (1500-2700RPM for the 45i) • Compact installation due to small size and low weight • Highly efficient, maximum energy • Environmentally friendly with low fuel consumption • Easy installation reduces costs, all connectors pre-fitted to base • Dual circuit freshwater cooling via heat exchanger • Pure sine wave is ideal for sensitive electronics • Electronic controlled voltage and frequency regulation • Voltage stability 230Vac ± 3% (400Vac ± 3% for the 45i) • Frequency stability 50Hz ± 2% • High starting capacity for air conditioners / diving compressors • Panda iControl LCD display; dual remote panel options available • Electric starting, auto starting capable • Automatically stops under alarm state

W

W

SP33337608

BLA Code

Description

337019 337020 337042 337044 337056 337082 55-03.05.01.002P

Panda 4800i PMS 230V 50Hz 4.8kVA Panda 5000i PMS 230V 50Hz 5kVA Panda 8000i PMS 230V 50Hz 8kVA Panda 10000i PMS 230V 50Hz 10kVA Panda 15000i PMS 230V 50Hz 15kVA Panda 25i PMS 230V 50Hz 25kVA Panda 45i PMS 230V 50Hz 45kVA

Dimensions LxWxH 580x370x545 595x390x410 520x445x545 536x445x555 650x465x589 840x520x664 1130x660x810

Inverter

SP33337030

Total Weight Sound Level Generator + Inverter 7m/3m/1m kg dB 80 7.9 54/64/68 90 7.9 54/64/68 110 12.3 52/62/67 120 12.3 54/64/68 162 17.4 54/64/68 263 25 55/60/70 495 55/60/70

SP33337324

Nominal Continuous Output Output kW kVA kW 3.8 4.8 3.3 4.2 5 3.5 6.4 8 5.5 8 10 7 12 15 10.8 20 25 18 36 45 33

Accessories: 337468 337450 337452 337466 337470 337456 SP33337436 SP33337440 SP33337322 SP33336980 SP33336984 55-21.03.10.045P

SP33337616 55-21.07.03.042P 55-21.07.03.041P 55- 21.07.03.017P 55 -21.07.03.046P

PMGi PMGi PMGi PMGi PMGi

5000 Inverter 8000 Inverter 10000 Inverter 15000 Inverter 25 Inverter

B ACT LA SA NT

S LE

Standard Inclusions: SP33337030 Cooling water expansion bottle SP33337324 Pierburg 12V remotely mounted fuel lift pump SP33337608 Remote iControl and monitoring panel 55-21.07.03.043P PMGi 4800 Inverter

CO

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

SPECIAL ORDER

13

Standard service kit 18 to suit 4800i Standard service kit 1 to suit 5000i Standard service kit 3 to suit 8000i Standard service kit 14 to suit 10000i Standard service kit 19 to suit 15000i Standard service kit 5 to suit 25i Engine mount to suit 4800i & 5000i Engine mount to suit 8000i - 10000i Engine mount to suit 15000i Diesel fuel filter 5 micron Marine grade diesel fuel filter 5 micron Service kit plus to suit 4800i

BOATING LIFESTYLE ADVENTURE

55-21.03.10.011P 55-21.03.10.015P 55-21.03.10.057P 55-21.03.10.042P 55-21.03.10.029P 55-21.03.04.080S 55-21.03.04.055S 55-21.03.04.057S 55-21.03.04.067S 55-32.30.01.009H 55-21.02.02.132P

00 252 725

Service kit plus 1 to suit 5000i Service kit plus 5 to suit 8000i Service kit plus 25 to suit 10000i Service kit plus to suit 15000i Service kit plus 19 to suit 25i Basic installation kit to suit 4800i - 15000i Basic installation kit to suit 25i Premium installation kit to suit 4800i - 15000i Premium installation kit to suit 25i Engine mount to suit 25i iControl 2 slave panel bla.com.au

781

Fischer Panda® Marine Generator - Premium Series Fischer Panda’s range of voltage regulated asynchronous generators are designed to provide an extremely stable voltage supply. They are ideally suited for appliances and accessories demanding continuous power and high starting requirements such as air-conditioning units and compressors.

TM

Fischer Panda® Premium Series generators are supplied with 3D sound insulation in a heavy duty GRP three piece capsule, all mechanical and electrical connections are fitted to the sound capsule base for ease of installation. When peace and quiet is your main focus, Fischer Panda® have a range of higher specification sound insulation options to suit your needs.

Fischer Panda® also offer generators with dual voltage (230V/400V) dual windings outputs, 24V DC starting and control, automatic starting and insulated from ground (above earth) units. 65kVA, 85kVA and 100kVA generators enclosed in a stainless steel MPL 4DS sound capsule are available. Please contact BLA on 1300 252 725 for more information.

55-01.03.01.007P

H

Features: • Small size and lightweight • Easy to install • Dual circuit freshwater cooling via heat exchanger • Electronic controlled voltage regulation for perfect sine wave control • Voltage tolerance with VCS (up to 80% performance) ± 3V • Power rating factor cosPhi 0.85 • High starting capacity for air conditioners, diving compressors • Short circuit stability with overload protection • Electric starting, auto starting capable • 12V/10A alternator for charging the starter battery L • Panda P6 Plus display; dual remote panel options available • Brushless • No signal noise • No rotating coils or diodes • External 12V fuel pump

W

337029

Standard Inclusions

H

ENGINE ROOM & POWER GENERATION

33

SP33337662

GRP Capsule

Description

337025 337027 337029 337048 337050 337070 337072 55-01.01.01.011P 55-01.03.01.007P

Panda Panda Panda Panda Panda Panda Panda Panda Panda

Dimensions

Weight

LxWxH 595x440x590 660x515x490 705x445x590 740x480x600 832x515x660 1010x515x675 1010x515x675 1010x515x675 1290x650x770

kg 164 180 195 249 297 355 403 403 767

W

BLA Code

8000 PMS 230V 50Hz 8kVA 10000 PMS 230V 50Hz 9.4kVA 12000 PMS 230V 50Hz 12kVA 15000 PMS 230V 50HzL 15kVA 18 PMS 230V 50Hz 18kVA 24 PMS 230V 50Hz 24kVA 30 PMS 230V 50Hz 30kVA 30IC PMS 230V 50Hz 31.7kVA 45 PMS 400V 50Hz 45kVA

Sound Level 7m/3m/1m dB 52/62/67 52/62/67 53/63/67 54/64/68 55/65/69 55/65/69 55/65/69 55/65/69 custom

SP33337030

Nominal Output kW kVA 6.8 8 8 9.4 10.2 12 12.9 15.2 15.3 18 20.4 24 25.5 30 27 31.9 38 45

SP33337324

Continuous Output kW kVA 6.1 7.2 7.2 8.5 9.1 10.8 11.6 13.7 13.7 16.2 18.3 21.6 22.9 27 24.3 28.6 35.1 40.5

Accessories: 337452 337466 337454 337470 337456 SP33337440 SP33337322 SP33336980 SP33336984 55-21.03.10.015P 55-21.03.10.056P

782

B ACT LA SA NT

S LE

Standard Inclusions: SP33337662 Remote control and monitoring panel P6-Plus SP33337030 Cooling water expansion bottle SP33337324 Pierburg 12V remotely mounted fuel lift pump

CO

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

SPECIAL ORDER

13

Standard service kit 3 to suit 8000 PMS Standard service kit 14 to suit 10000 PMS Standard service kit 4 to suit 12000 PMS Standard service kit 19 to suit 15000 PMS Standard service kit 5 to suit 18 - 30IC PMS Engine mount to suit 8000 PMS - 12000 PMS Engine mount to suit 15000 PMS Diesel fuel filter 5 micron Marine grade diesel fuel filter 5 micron Service kit plus 5 to suit 8000 PMS Service kit plus 24 to suit 10000 PMS

BOATING LIFESTYLE ADVENTURE

55-21.03.10.017P 55-21.03.10.042P 55-21.03.10.018P 55-21.03.10.029P 55-21.03.04.080S 55-21.03.04.055S 55-21.03.04.057S 55-32.30.01.009H 55-21.02.02.120P 55-21.02.02.121P

00 252 725

Service kit plus 7 to suit 12000 PMS Service kit plus to suit 15000 PMS Service kit plus 8 to suit 18 PMS Service kit plus 19 to suit 24 - 30IC PMS Basic installation kit 2 to suit 8000 - 15000 PMS Basic installation kit 3 to suit 18 & 24 PMS Premium installation kit 2 to suit 8000 - 15000 PMS Engine mount to suit 18 - 30IC PMS Automatic start-up kit to suit 8000 - 12000 PMS Automatic start-up kit to suit 15000 - 30IC PMS

bla.com.au

33

Fischer Panda® Marine Generator

- Heavy Duty Series 1500RPM

The 1500RPM Fischer Panda® range has been designed and manufactured specifically to suit heavy duty and commercial applications where a longer service life is required. The range features voltage regulated asynchronous generators which are designed to provide an extremely stable voltage supply.

TM

Fischer Panda® also offer generators with dual voltage (230V/400V) dual windings outputs, 24V DC starting and control, automatic starting, insulated from ground (above earth) units. 40kVA to 200kVA generators enclosed in a stainless steel MPL 4DS sound capsule are also available. Please contact BLA on 1300 252 725 for more information.

Features: • Easy to install • Suitable for internal installation • Low ambient temperatures • External control panel with cable • Includes seawater impeller pump • Includes freshwater (coolant) pump • External 12V fuel lift pump • Heat exchanger for engine and winding (dual circuit cooling) • Voltage tolerance with VCS (up to 80% performance) ± 3V • Power rating factor cosPhi 0.85 • 12V/10A alternator for charging the starter battery • Starter system 12V (24V optional)

337076

H

337036

ENGINE ROOM & POWER GENERATION

The 1500RPM series generators are supplied with 3D sound insulation in a heavy duty GRP three piece capsule for units up to the 12-4 PMS. They are supplied in a stainless steel MPL 4DS sound capsule for units up to 200-4 PMS. When peace and quiet is your main focus, Fischer Panda® have a range of higher specification sound insulation options to suit those needs.

H

W

Standard Inclusions

SP33337662

L

SP33337030

SP33337324

MPL Capsule

Description

337032 337034 337036 337052 337076 337078

Panda Panda Panda L Panda Panda Panda

Dimensions W

BLA Code

7.5-4 PMS 230V 50Hz 7.6kVA 9-4 PMS 230V 50Hz 9.4kVA 12-4 PMS 230V 50Hz 12.3kVA 17-4 PMS 230V 50Hz 17.5kVA 22-4 PMS 230V 50Hz 21kVA 30-4 PMS 230V 50Hz 30kVA

Weight

LxWxH kg 830x515x660 278 830x515x665 289 950x515x665 315 1150x660x760 553 1200x620x770 631 on request

Sound Level 7m/3m/1m dB 52/62/66 52/62/66 52/62/66 53/63/67 53/63/67

Nominal Output kW kVA 6.5 7.6 8 9.4 10.5 12.4 14.7 17.3 18.6 21.9 25 29.4

Continuous Output kW kVA 5.8 6.8 7.2 8.5 9.4 11.2 13.2 15.6 16.7 19.7 22.5 26.5

Remote control and monitoring panel P6-Plus Cooling water expansion bottle Pierburg 12V remotely mounted fuel lift pump

Accessories: 337456 SP33336980 SP33336984 55-21.03.10.018P 55-21.03.10.029P 55-21.03.04.055S 55-21.03.04.057S 55-32.30.01.009H 55-21.02.02.121P

Standard service kit 5 to suit 7.5-4 PMS - 12-4 PMS Diesel fuel filter 5 micron Marine grade diesel fuel filter 5 micron Service kit plus 8 to suit 7.5-4 PMS & 9-4 PMS Service kit plus 19 to suit 12-4 PMS Basic installation kit 3 to suit 7.5-4 PMS - 12-4 PMS Premium installation kit 2 to suit 7.5-4 PMS - 12-4 PMS Engine mount to suit 7.5-4 PMS - 12-4 PMS Automatic start-up kit

BOATING LIFESTYLE ADVENTURE

B ACT LA SA NT

S LE

Standard Inclusions: SP33337662 SP33337030 SP33337324

CO

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

SPECIAL ORDER

13

00 252 725

bla.com.au

783

ENGINE ROOM & POWER GENERATION

33

Fischer Panda® Generator - AGT-DC Series The Fischer Panda® AGT-DC generators produce direct current and are designed to function as an integral part of a combined AC-DC hybrid power system. Each unit constantly monitors onboard battery capacities and when required will start and charge the battery banks automatically. For onboard AC energy requirement, an inverter is utilised to distribute the battery power. The AGT-DC generator system provides power to a typical 12/24 plus 240 volt power combination and does not require the generator to be constantly running. These systems are ideal for varying power demands which do not require a generator to run continuously throughout the day or night.

TM

Features: • Charges the batteries automatically on demand • Versions for 12V, 24V, 48V and other voltages • Efficient alternator and rectifier produces more power • Current up to 280A, 12V or 24V • Variable speed, fuel efficient operation by sensing power demand • Can start automatically with signal from most battery monitors • Ideal for hybrid power systems and hybrid propulsion

Standard Inclusions

337000

SEE SECTION

11

55-21.02.02.017H

BLA Code

Description

337000 337002 337004 337006 337013 55-03.01.01.106P 55-03.03.01.006P 55-03.03.01.004P 55-AGT-15000PMS

AGT-DC AGT-DC AGT-DC AGT-DC AGT-DC AGT-DC AGT-DC AGT-DC AGT-DC

4000-12V 4kW 4000-24V 4kW 5000-12V 4.5kW 6000-24V 6kW 8000-24V 8kW 10000-48V 9.1kW 11000-48V 10.9kW 13000-48V 12.5kW 15000 15.6kW

FOR SUITABLE

BATTERIES

SP33337324

Dimensions LxWxH 595x390x405 595x390x405 590x520x600 590x520x600 655x510x595 650x505x594 660x515x594 760x540x670

Weight kg 90 90 139 139 146 160 165 291 on request

Sound Level 7m/3m/1m dB 54/64/68 54/64/68 53/63/68 53/63/68 53/63/68 53/63/68 54/64/68 55/65/69

Nominal Output kW 4 4 4.5 6 8 9.1 10.9 12.5 15.6

Continuous Output kW 3.2 3.2 3.6 4.8 6.4 7.28 8.7 10 12.5

AGT Remote control panel Pierburg 12V remotely mounted fuel lift pump

Accessories: 337450 337452 337454 SP33337436 SP33337440

Standard service kit 1 to suit AGT-DC 4000 Standard service kit 3 to suit AGT-DC 5000 & 6000 Standard service kit 4 to suit AGT-DC 8000 Engine mount to suit AGT-DC 4000 Engine mount to suit AGT-DC 5000-8000

BOATING LIFESTYLE ADVENTURE

B ACT LA SA NT

S LE

784

Standard Inclusions: 55-21.02.02.017H SP33337324

CO

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

SPECIAL ORDER

13

00 252 725

bla.com.au

33

Fischer Panda® Vehicle Generator TM

ENGINE ROOM & POWER GENERATION

The water-cooled diesel generators from Fischer Panda® are renowned worldwide for being innovative, reliable and extremely quiet. Fischer Panda® vehicle generators feature an effective water-cooling system and lightweight compact construction. This has made Fischer Panda® a leader for professional applications in mobile broadcasting, emergency services, command centres, expedition vehicles, promotion vehicles and luxury RVs. Many design elements are required to work together to achieve the low sound level of Fischer Panda® generators. An efficient water-cooling system requires that the radiator is installed separate from the generator. A flow of cooling air is no longer required inside the capsule which helps maintain constant temperature. Most models up to 25kW are fitted with an internal water-cooled exhaust silencer resulting in cooler exhaust gases, less noise and simpler exhaust installation. PVMV-N, PVK-U and PVK-UK generators (up to 25kW) are fitted with an internal water-cooled exhaust silencer.

Features: • Quiet operation for noise sensitive applications like TV news gathering • Compact design enables installation in smaller spaces • Lighter weight allows use of smaller vehicles and keeps total weight lower • Clean sine wave power for reliable operation of critical equipment • Roof mount radiator, side mount radiator or integrated radiator versions • Less space required for installation • Water-cooled AC winding • Can be installed in tight spaces • Hermetically sealed capsule • All connections pre-fitted on capsule • Modular design ensures installation flexibility • No appreciable warming of the installation area • Super silent sound insulation system • Water-cooled silencer (up to 25kW) • No cooling air circulating within capsule

Water-cooled pre-silencer Hot exhaust gases Main silencer

Cooled exhaust gases

Water-cooled muffler

BOATING LIFESTYLE ADVENTURE

bla.com.au

785

33

Fischer Panda® Vehicle Generator - PVMV-N Series

ENGINE ROOM & POWER GENERATION

Vehicle generator with sound insulation capsule, integrated water-cooled vertically mounted pre-silencer and main silencer.

TM

Features: • Parallel connection of two iSeries generators of the same type; refer to page 791 • Easy to install • Requires external radiator • Suitable for keel cooling in ships • Suitable for internal installation • Best choice, when space and length available • Complete water-cooled silencer inside capsule • GRP capsule is standard for models up to 12kW • Stainless steel capsule (MPL) is standard for models 15kW and above • Inverter generators and asynchronous models available

337231

Standard Inclusions

337218

SP33337662

BLA Code

Description

337212 337214 337216 337218 337225 337227 337229 337231 337233 337235 337237

Panda Panda Panda Panda Panda Panda Panda Panda Panda Panda Panda

5000i PVMV-N 5kVA 8000i PVMV-N 8kVA 10000i PVMV-N 10kVA 15000i PVMV-N 15kVA 8000 PVMV-N 8kVA 10000 PVMV-N 9kVA 12000 PVMV-N 12kVA 15000 PVMV-N 15kVA 18 PVMV-N 18kVA 24 PVMV-N 24kVA 30 PVMV-N 30kVA

Dimensions

Weight

LxWxH 770x430x450 760x515x610 790x510x610 870x520x515 865x515x635 910x515x625 950x515x625 950x515x625 1100x540x680 1220x540x680 1270x570x700

kg 133 190 200 210 230 243 253 298 415 465 512

Sound Level 7m/3m/1m dB 54/64/68 52/62/67 52/62/67 54/64/68 52/62/67 52/62/67 53/63/67 54/64/68 55/65/69 55/65/69 55/65/69

SP33337608

Nominal Output kW 4 6 8 12 6.8 8 10.2 12.7 15.3 20.4 25.5

SP33337324

Continuous Output kW 3.5 5.5 7.2 10.8 6.1 7.2 9.1 11.6 13.7 18.3 22.9

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

786

Standard service kit 8 to suit 8000i, 15000i, 8000, 12000 & 15000 Standard service kit 9 to suit 18 & 24 Engine mount to suit 8000i, 8000 & 12000 Engine mount to suit 15000i & 15000 Standard service kit to suit 10000i Standard service kit to suit 10000 Standard service kit to suit 30 Engine mount to suit 18, 24 & 30

BOATING LIFESTYLE ADVENTURE

B ACT LA SA NT

S LE

Accessories: 337460 337462 SP33337595 SP33337322 55-21.03.10.059P 55-21.03.10.058P 55-21.03.10.010P 55-32.30.01.009H

CO

Standard Inclusions: SP33337662 Remote control and monitoring panel P6-Plus for asynchronous models SP33337608 Remote iControl and monitoring panel for inverter generators SP33337324 Pierburg 12V remotely mounted fuel lift pump

SPECIAL ORDER

13

00 252 725

bla.com.au

33

Fischer Panda® Vehicle Generator - PVMV-N Series Heavy Duty 1500RPM Vehicle generator with sound insulation capsule, integrated water-cooled vertically mounted pre-silencer and main silencer.

TM

• Easy to install • Requires external radiator • Suitable for keel cooling in ships • Suitable for internal installation • Best choice when space and length available • Complete water-cooled silencer inside capsule • GRP capsule is standard for models up to 12kW • Stainless steel capsule (MPL) is standard for models 15kW and above Standard Inclusions

SP33337662

337303 337305 337307 337309 337311 337313

Panda Panda Panda Panda Panda Panda

Dimensions

7.5-4 PVMV-N 7.6kVA 9-4 PVMV-N 9.4kVA 12-4 PVMV-N 12.3kVA 17-4 PVMV-N 17.5kVA 22-4 PVMV-N 21.9kVA 30-4 PVMV-N 29.4kVA

Weight

LxWxH kg 1055x515x665 338 1055x515x670 389 on request 1300x620x800 581 1390x610x770 643 on request

Sound Level 7m/3m/1m dB 52/62/66 52/62/66 52/62/66 53/63/67 53/63/67

Nominal Output kW 6.5 8 10.5 14.7 18.6 25

CO

Description

337303

B ACT LA SA NT

S LE

BLA Code

SP33337324

SPECIAL ORDER

13

00 252 725

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

Standard Inclusions: SP33337662 Remote control and monitoring panel P6-Plus SP33337324 Pierburg 12V remotely mounted fuel lift pump

Accessories: 337462 55-21.03.10.010P 55-32.30.01.009H

Standard service kit 9 to suit 7.5-4 & 9-4 Standard service kit to suit 12-4 Engine mount to suit 7.5-4, 9-4, 12-4

Fischer Panda® Vehicle Generator

- PVM-NE Series Heavy Duty 1500RPM

The PVM-NE is the standard version for generators above 30kW. The PVM-NE is similar to the PVMV-N with the exception that the silencer is not water-cooled and is externally mounted on the capsule.

ENGINE ROOM & POWER GENERATION

Features:

TM

The generator must be installed in a well-ventilated area because heat is absorbed by the silencer. An additional silencer is not necessary. The generator is housed within a sound insulation capsule.

Features: • Suitable for internal installation • Requires external radiator • Easy to install

Standard Inclusions

SP33337662

SP33337324

Description

55-30-4-NE 55-40-4-NE 55-50-4-NE 55-60-4-NE

Panda Panda Panda Panda

30-4 40-4 50-4 60-4

PVM-NE PVM-NE PVM-NE PVM-NE

29.4kVA 41.1kVA 47kVA 59kVA

Dimensions

Weight

LxWxH 1473x690x890 1560x710x950 1560x710x950 1825x790x1000

kg 770 867 891 1298

Nominal Continuous Output Output kW kW 25 22 35 31 40 36 50 45

B ACT LA SA NT

S LE

BLA Code

CO

55-30-4-NE

SPECIAL ORDER

13

00 252 725

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

Standard Inclusions: SP33337662 Remote control and monitoring panel P6-Plus SP33337324 Pierburg 12V remotely mounted fuel lift pump BOATING LIFESTYLE ADVENTURE

Accessories: 55-32.30.01.010H

Engine mount to suit 30-4 & 40-4

bla.com.au

787

33

Fischer Panda® Vehicle Generator - PVK-U Series TM

Features: • Designed for external mounting • Assembly bolts pre-fitted to housing • Metal capsule with a heavy-duty cover • Wide access hatch for easier access • Water-cooled exhaust silencer inside capsule • No additional exhaust silencer required • Requires external radiator

Standard Inclusions

SP33337662

SP33337324

Description

337251 337253 337255 337257 337259 337261 337263

Panda Panda Panda Panda Panda Panda Panda

8000 PVK-U 8kVA 10000 PVK-U 9kVA 12000 PVK-U 12kVA 15000 PVK-U 15kVA 18 PVK-U 18kVA 24 PVK-U 24kVA 30 PVK-U 30kVA

Dimensions

Weight

LxWxH 870x523x580 on request 960x530x625 1000x530x630 1100x560x680 1225x542x684 1270x570x690

kg 279 317 377 440 492 530

Sound Level 7m/3m/1m dB 52/62/67 52/62/67 53/63/67 54/64/68 55/65/69 55/65/69 55/65/69

Nominal Output kW 6.8 8 10.2 12.7 15.3 20.4 25.5

Continuous Output kW 6.1 7.2 9.1 11.6 13.7 18.3 22.9

CO

337251

BLA Code

B ACT LA SA NT

S LE

ENGINE ROOM & POWER GENERATION

Vehicle generator with internal water-cooled silencer for mounting externally on the vehicle chassis. This generator type is ideal for installing on trucks with limited space between axles.

The heavy-duty housing is also suitable for expedition vehicles.

SPECIAL ORDER

13

00 252 725

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

Standard Inclusions: SP33337662 Remote control and monitoring panel P6-Plus SP33337324 Pierburg 12V remotely mounted fuel lift pump Accessories: 337460 337462 SP33337595 55-32.30.01.009H

Standard service kit 8 to suit 8000, 12000 & 15000 Standard service kit 9 to suit 18 & 24 Engine mount to suit 8000 & 12000 Engine mount to suit 18, 24 & 30

SP33337322 55-21.03.10.058P 55-21.03.10.010P

Engine mount to suit 15000 Standard service kit to suit 10000 Standard service kit to suit 30

Fischer Panda® Vehicle Generator - PVK-UK Series Vehicle generator featuring compact construction with integrated cooling system for mounting externally on the vehicle chassis.

TM

Features: • Designed for external mounting • Assembly bolts pre-fitted to housing • Metal capsule with a heavy-duty cover • Wide access hatch for easier access • Sound insulation capsule • Water-cooled exhaust silencer Standard Inclusions inside capsule • No additional exhaust silencer required • Integrated radiator and SP33337662 SP33337324 cooling system

337277 337279 337281 337283 337285 337287 337289

Panda Panda Panda Panda Panda Panda Panda

8000 PVK-UK 8kVA 10000 PVK-UK 9kVA 12000 PVK-UK 12kVA 15000 PVK-UK 15kVA 18 PVK-UK 18kVA 24 PVK-UK 24kVA 30 PVK-UK 30kVA

Dimensions LxWxH 1330x522x620 1516x522x620 1566x530x625 1606x522x630 1736x560x680 1854x542x684 1970x564x640

Total Weight kg 352 375 411 436 544 492 687

Sound Level 7m/3m/1m dB 52/62/67 52/62/67 53/63/67 54/64/68 55/65/69 55/65/69 55/65/69

Nominal Output kW 6.8 8 10.2 12.7 15.3 20.4 25.5

337287

CO

Description

B ACT LA SA NT

S LE

BLA Code

SPECIAL ORDER

13

00 252 725

N.B. Dimensions and weights are approximate values only. Please confirm current dimensions and weights when ordering.

Standard Inclusions: SP33337662 Remote control and monitoring panel P6-Plus SP33337324 Pierburg 12V remotely mounted fuel lift pump Accessories: 337460 337462 SP33337595 SP33337322

788

Standard service kit 8 to suit 8000, 12000 & 15000 Standard service kit 9 to suit 18000 & 24000 Engine mount to suit 8000 & 12000 Engine mount to suit 15000 BOATING LIFESTYLE ADVENTURE

55-21.03.10.058P 55-21.03.10.010P 55-32.30.01.009H

Standard service kit to suit 10000 Standard service kit to suit 30 Engine mount to suit 18, 24 & 30

bla.com.au

33

Fischer Panda® Vehicle Generator Radiators Vehicle Installation: Roof-mounted radiator The radiator must be installed where good access to fresh air circulation is guaranteed. The best location is horizontally on the roof of the vehicle.

The radiator has an integrated expansion tank.

TM

ENGINE ROOM & POWER GENERATION

337338

Vehicle Installation: Side-mounted radiator A radiator can be fitted to the vehicle’s side when there is no space on the roof.

337352

Vehicle Installation: Chassis-mounted When sufficient clearance is available, the radiator may be mounted under the chassis. The air must be able to circulate correctly so warm air does not flow back over the radiator.

Radiator mounted underneath vehicle

B ACT LA SA NT

S LE

CO

337350

SPECIAL ORDER

13

BLA Code 337338 337341

Description Radiator RD1.2 DC Roof mount Radiator RD3.3 Trop-S350 Roof mount

Dimensions LxWxH 705x390x308 1055x515x393

337343

Radiator RD4.2-FE040 Roof mount

659x610x370

337345 337347 337340 337350

Radiator Radiator Radiator Radiator

1000x600x335 1500x600x380 760x450x224 900x450x294

55-20.02.01.038P

Radiator RV5.2-FE040 Side mount

337352 337354 337356 55-20.02.01.003P 55-20.02.01.052P

Radiator Radiator Radiator Radiator Radiator

RD16.2-2xFE040 Roof mount RD6/2.2-2xFE045 Roof mount RV2.2 DC Side mount RV3.3 Trop-S350 Side mount

RV13.160-FE050 Side mount RV6/2.2-2xFE045 Side mount RV14.120-FE056 Side mount RV7.2-FE071 Side mount RV8.2-FE063 Side mount

BOATING LIFESTYLE ADVENTURE

610x580x358 600x719x436 1200x550x285 780x690x420 1000x800x420 1100x1000x420

00 252 725

Weight Compatible Generators kg 18 5000i, 8000i 42 8000i, 10000i, 15000i, 8000, 10000, 12000, 15000, 7.5-4, 9-4, 12-4 32 8000i, 10000i, 15000i, 8000, 10000, 12000, 15000, 7.5-4, 9-4, 12-4 56 18, 24, 17-4, 22-4 67 30, 30-4, 40-4 21 8000i, 8000, 10000 33 10000i, 15000i, 8000, 10000, 12000, 15000, 7.5-4, 9-4, 12-4 32 10000i, 15000i, 8000, 10000, 12000, 15000, 7.5-4, 9-4, 12-4 52 18, 24, 17-4, 22-4 67 30 48 30, 40, 30-4, 40-4 63 60, 50-4 78 60, 60-4 bla.com.au

789

ENGINE ROOM & POWER GENERATION

33

Fischer Panda® Military Generators Military generators must be capable of running 24 hours a day, 7 days a week and be totally reliable. Generators must start at below minus 45 degrees Celsius, and work reliably and with high efficiency up to at least 55 degrees Celsius at 3,000 metres above sea level.

Sandstorms, rain or snow should not have any adverse effect on generators, while acoustic, electronic and thermal signatures must all be low. Easy access for maintenance is vital and a long operational life is demanded with comprehensive first rate support.

TM

Wheeled and tracked vehicles have become the chosen platform of today’s modern armed forces for deploying powerful electronic systems. Used by NATO, Fischer Panda® generators are designed and built specifically for mobile units requiring an efficient and robust power supply while operating independently for long periods. The aim is to provide efficient and reliable power under harsh and extreme conditions. The modular nature of the generators means they can be built as fully self-contained units in a number of configurations, or installed around the vehicle depending on the space available and the role required.

The Fischer Panda® AC alternators supply electricity with a very clean sine wave suitable for sensitive electrical equipment. They are also capable of providing sufficient power for starting heavier equipment such as environmental control units (ECUs). Fischer Panda® DC generators enhance lighter vehicle systems with powerful charging capabilities enabling indefinite silent running. Using water-cooling and operating within a sound-insulated housing all generators are very quiet, are almost vibration free and have minimal thermal signatures which makes them ideal for front line operations.

B ACT LA SA NT

S LE

CO

BLA can supply any custom size for any application. For more information contact BLA on 1300 252 725.

SPECIAL ORDER

13

790

BOATING LIFESTYLE ADVENTURE

00 252 725

bla.com.au

33

Fischer Panda® Parallel iSeries Generators TM

Digital Panel

Digital Panel

iSeries Parallel Generator

iSeries Parallel Generator

Sync Cable

Parallel Inverter

Description Parallel system sync cable

Example system setup with 2x parallel iSeries marine generators

B ACT LA SA NT

S LE

230V Output

CO

Parallel Inverter

SPECIAL ORDER

13

00 252 725

Fischer Panda® Seamless Parallel Transfer Unit The Fischer Panda® unit is designed for connecting two Fischer Panda® asynchronous AC Generators in parallel. The unit can be used to synchronise both generators, to switch the load from one generator to another or operate both generators in parallel during peak load periods. A range of units are available to suit varying generator types and power requirements up to 100kW per generator. The parallel power units can be combined with the automatic AC transfer unit into a single housing on request. The parallel transfer unit does not feature load-sharing capabilities for safety reasons. Both generators are coupled and operate together as one unit. To increase operational safety, both generators are shutdown if a system failure occurs.

Panel

ENGINE ROOM & POWER GENERATION

The Fischer Panda® parallel iSeries generators are the next generation of compact, super silent and powerful generators for marine and vehicle applications. When weight distribution plays a critical role, two smaller iSeries parallel generators can be installed onboard.

Their power can be combined to provide the same performance which would only be available using a single large generator. Simple parallel connection of two outputs means there is no need for a paralleling cabinet. Both generators are fully independent from each other. They have their own controller, inverter and remote panel to enable individual operation. The special inverter design allows parallel operation by synchronising both inverters with a single cable.

When operating in parallel the load is shared equally by both generators. The iSeries generators are light and compact, offering up to 30% weight and space saving. Distributing the weight and space required can be a major advantage in some applications. For further information contact BLA on 1300 252 725.

TM

Panel

Fischer Panda AC Generator

Fischer Panda AC Generator

Parallel Transfer Unit

BOATING LIFESTYLE ADVENTURE

B ACT LA SA NT

S LE

Description Parallel switching box for 2 Panda PMS 4500 FCB Parallel cabinet 3.8kW - 15.3kW 1ph generators Parallel cabinet 6.5kW - 20.4kW 3ph generators Parallel cabinet 25kW - 40kW 3ph generators Parallel cabinet for 42.5kW - 55.2kW 3ph generators

CO

Domestic Power Circuit

SPECIAL ORDER

13

00 252 725

bla.com.au

791

33

Fischer Panda® Installation Kits - Basic

Cooling water installation • Through-hull with filter • Seacock • Hose connection • Sea water filter • Hose clamps • Coolant hose (4m) • Ventilation valve

Exhaust installation • Water collector • Hull outlet • Hose connection • Hose bush • Hose clamps • Exhaust hose (5m) • Silencer

TM

Fuel installation • Fuel hose • Hose clamps • Non-return valve

55-21.03.04.080S

Description

CO

BLA Code 55-21.03.04.080S 55-21.03.04.055S

Kit 2 to suit 4000s, 4800i to 15000i & 8000PMS to 15000PMS Kit 3 to suit 25000i, 18 PMS, 24 PMS, 7.5-4 PMS to 12-4 PMS)

B ACT LA SA NT

S LE

ENGINE ROOM & POWER GENERATION

Contains the items required to install your new Fischer Panda® generator quickly and simply using quality products recommended by Fischer Panda®.

SPECIAL ORDER

13

00 252 725

Fischer Panda® Installation Kits - Premium The Premium kit contains the components of the basic installation kit plus an exhaust gas/water separator unit which achieves further noise reduction. The exhaust gas/water separator unit strongly reduces the exhaust noise; the "water splash" in particular is totally eliminated. Additionally, the exhaust gas/water separator unit functions as an exhaust gas goose neck, which prevents the water from flowing back into the generator.

TM

Exhaust water separator

CO

Description Kit 2 to suit 4000s, 4800i to 15000i & 8000PMS to 15000PMS Kit 3 to suit 25000i, 18 PMS, 24PMS, 7.5-4 PMS to 12-4PMS

B ACT LA SA NT

S LE

BLA Code 55-21.03.04.057S 55-21.03.04.067S

SPECIAL ORDER

13

00 252 725

Fuel Filter with Water Separator It is important to fit a good quality fuel filter in diesel engines and generator installations as water in diesel fuel is a major cause of expensive damage to diesel engines. Fuel filters with water separators are designed to provide protection to the diesel fuel system. Both filters have four ports, requiring 2x Plugs (2x SP33336988) and 2x Hose Tails (2x SP33336990 or 2x SP33336992). An optional electric sensor that detects water in the fuel can be added.

792

Diesel fuel filter with 5 micron element Marine grade diesel fuel filter with 5 micron element

SP33336984 SP33336980

Single Plug 1⁄4-18 NPT Single Hose Tail 5⁄16 x 1⁄4-18 NPT Single Hose Tail 3⁄8 x 1⁄4-18 NPT Replacement 5 micron element Replacement marine grade 5 micron element Electric water in fuel sensor kit 12V Hand primer pump kit Water collection bowl BOATING LIFESTYLE ADVENTURE

55-42821 SP33336988 SP33336990

B ACT LA SA NT

S LE

Accessories: SP33336988 SP33336990 SP33336992 SP33336982 SP33336986 55-42821 55-29578 55-29899

Description

CO

BLA Code SP33336980 SP33336984

55-29578

SPECIAL ORDER

13

SP33336992

00 252 725

55-29899

bla.com.au

33

Fischer Panda® Service Kits - Standard The Fischer Panda® service kits are designed for the routine service tasks which can be performed by the operator unless highlighted differently in the manual. These service kits contain original Genset spare parts.

CO

BLA Code 337464 337468 337450 337452 337466 337454 337470 337456 337460 337462 55-21.03.10.010P 55-21.03.10.059P 55-21.03.10.058P

• 1 x impeller kit (with gasket)

SPECIAL ORDER

13

00 252 725

Description Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit

11 to suit 4000s PMS 18 to suit 4800i PMS 1 to suit 5000i & AGT 4000 PMS 3 to suit 8000, 8000i, AGT 5000 & AGT 6000 PMS 14 to suit 10000 & 10000i PMS 4 to suit 12000 & AGT 8000 PMS 19 to suit 15000 & 15000i PMS 5 to suit 18, 24, 30, 7.5-4, 9-4, 12-4 & 25i PMS 8 to suit 8000,12000, 15000, 8000i & 15000i PVM & PVK 9 to suit 18, 24, 7.5-4, 9-4 PVM & PVK 10 to suit 30 & 12-4 PVM & PVK 16 to suit 10000i PVM & PVK 15 to suit 10000 PVM & PVK

337452

Fischer Panda® Service Kits Plus These Fischer Panda® service kits contain original Genset spare parts for routine service tasks and all parts for the initial 600 h service intervals. These service kits are supplied in a convenient water-proof plastic box.

Kit Includes: • 4 x fuel filter (5 x model dependent) • 4 x filter element for air filter • 4 x tooth-belt (heat-proof)

• 3 x fuse straps • 1 x fuel pre-filter element

Description plus plus plus plus plus plus plus plus plus plus

to suit 4800i PMS 1 to suit 5000i PMS 5 to suit 8000, 8000i, AGT 5000, AGT 6000 PMS 25 to suit 10000i PMS 24 to suit 10000 PMS 7 to suit 12000, AGT 8000 PMS to suit 15000i PMS 8 to suit 18, 7.5-4, 9-4 PMS 19 to suit 24, 30, 12-4 PMS 20 to suit 4000s PMS

55-21.03.10.017P

CO

Kit Kit Kit Kit Kit Kit Kit Kit Kit Kit

B ACT LA SA NT

S LE

BLA Code 55-21.03.10.045P 55-21.03.10.011P 55-21.03.10.015P 55-21.03.10.057P 55-21.03.10.056P 55-21.03.10.017P 55-21.03.10.042P 55-21.03.10.018P 55-21.03.10.029P 55-21.03.10.046P

• 2 x impeller kit (with gasket) • 1 x service kit • 2 x valve cover gasket

TM

ENGINE ROOM & POWER GENERATION

• 1 x filter element for air filter • 1 x toothed belt (heat-proof)

B ACT LA SA NT

S LE

Kit Includes: • 1 x oil filter • 1 x fuel filter

TM

SPECIAL ORDER

13

00 252 725

Fischer Panda® Engine Mounts - Captive The captive shock-mounts are suitable for marine and vehicle Gensets.

They absorb the vibrations of the generator, thereby minimising the noise, and the generator is secured against slipping or breaking off.

TM

SP33337440

Engine Engine Engine Engine Engine Engine

mount mount mount mount mount mount

to suit 4000s, 4800i & 5000i PMS to suit 8000 PMS - 12000, 8000i - 12000i PMS BRB 80 B50 M10 SH50 to suit 15000 PMS BRB 80 A40 M10 SH40 to suit 8000i, 8000 & 12000 PVM & PVK BRB 80 B60 M10 SH60 to suit 8, 24 & 30 PVM & PVK to suit 30-4 & 40-4 PVM & PVK

BOATING LIFESTYLE ADVENTURE

CO

Description

B ACT LA SA NT

S LE

BLA Code SP33337436 SP33337440 SP33337322 SP33337595 55-32.30.01.009H 55-32.30.01.010H

SPECIAL ORDER

13

00 252 725

bla.com.au

793

Fischer Panda® Control Panel

- Master/Slave Adapter P6 Plus

A master/slave combination makes it possible to operate the Genset with two remote control panels. For example, the Genset can be started up with one remote control panel and stopped with the other. Connecting a second remote control panel affords better control options, which will increase safety. The main panel acts as the "master panel" to which the Genset is connected. The second remote control panel – the "slave panel" which works in parallel with the main (master) panel, i.e. the Genset can be operated with either the main panel or the slave panel.

TM

A Panel P6 Plus - P6 Plus panel configuration (master/slave combination) consists of: • 2 x Panda P6 Plus remote control panels • 2 x slave panel adaptors Items required for a master/slave combination:

BLA Code 55-21.02.02.015H

CO

• 1 x Panda P6 Plus remote control panel • 2 x slave panel adapters (1 x for existing panel + 1 x for additional panel) • 12-core cable for connecting the two panels

Description Master/slave adaptor for connection between slave panel and the Panda P6 Plus panel

B ACT LA SA NT

S LE

SPECIAL ORDER

13

00 252 725

N.B. One remote control panel is already included in the Genset scope of delivery.

Fischer Panda® Control Panel

- iControl 2 Slave Panel

With the automatic start-up function, the generator can be started with an external signal.

The automatic starting procedure consists of pre-heating and operating the electric starter motor. The automatic start-up consists of an automatic module on the remote control panel, a re-start protection, and a speed sensor. It is possible to refit an existing remote control panel with an automatic module.

TM

With iControl 2 - iControl 2 panel configuration, up to three slave panels can be operated together with one iControl master panel.

An iControl master/slave combination consists of: • 1 x Panda iControl remote control panel • 1 - 3 Panda iControl slave panels

Description iControl 2 slave panel

N.B. One remote control panel is already included in the Genset scope of delivery.

You merely have to order the desired quantity of slave panels.

B ACT LA SA NT

S LE

BLA Code 55-21.02.02.132P

CO

ENGINE ROOM & POWER GENERATION

33

SPECIAL ORDER

13

00 252 725

Fischer Panda® Lead-Through Fitting Used to make a clean and robust seal for the cooling water and exhaust hoses in roof mounted and side mounted vehicle radiator installations.

TM

BLA Code 55-31.20.04.053H

794

Description

B ACT LA SA NT

S LE

CO

Features: • 316 grade polished stainless steel • 40mm with 90° elbow

SPECIAL ORDER

13

Lead-through fitting 40mm ID with 90° elbow

BOATING LIFESTYLE ADVENTURE

00 252 725

bla.com.au

33

Fischer Panda® Lead-Through Fitting - Dual Used to make a clean and robust seal for the cooling water in roof mounted and side mounted vehicle radiator installations.

TM

Lead-through dual fitting 20mm ID with 90° elbow Lead-through dual fitting 25mm ID with 90° elbow

CO

Description

B ACT LA SA NT

S LE

BLA Code 55-31.20.04.050H 55-31.20.04.051H

SPECIAL ORDER

13

00 252 725

Fischer Panda® Automatic start-up With the automatic start-up function, the generator can be started with an external signal. The automatic starting procedure consists of pre-heating and operating the electric starter motor.

The automatic start-up consists of an automatic module on the remote control panel, a re-start protection, and a speed sensor.

It is possible to refit an existing remote control panel with an automatic module.

Automatic start-up kit to suit 8kVA - 12kVA generators Automatic start-up kit to suit 15kVA - 75kVA generators

CO

Description

B ACT LA SA NT

S LE

BLA Code 55-21.02.02.120P 55-21.02.02.121P

TM

ENGINE ROOM & POWER GENERATION

Features: • 316 grade polished stainless steel • 20mm or 25mm with 90° elbow • Two ducts for feed and return line

SPECIAL ORDER

13

00 252 725

Fischer Panda® Generator Signal Interface This control module enables the Fischer Panda® generator to be connected into a power management and control network. Other devices such as programmable logic controllers (PLCs) can then be used to control and monitor the generator remotely.The potential-free contacts enable external applications to access the status signals from the generator. External applications can also start and stop the generator.

BLA Code 337102

Description

B ACT LA SA NT

S LE

CO

TM

SPECIAL ORDER

13

Generator signal interface BOATING LIFESTYLE ADVENTURE

00 252 725

bla.com.au

795

ENGINE ROOM & POWER GENERATION

33

Sierra Silicone Exhaust Coupler

Exhaust Hose

These blue silicone exhaust couplers provide simple manifold to solid exhaust pipe connection with angular and longitudinal misalignment compensation in wet exhaust systems. They also provide essential vibration absorption. The silicone couplers are stable at elevated temperatures, resistant to exhaust gas, antifreeze and salt water. Temperature range: -28C° to +175°C

The inner tube of this hose is constructed of nitrile black rubber that is exhaust gas, fuel and fire resistant, whilst the outer cover is manufactured from an NBR/CR blend which provides good resistance to abrasion, hydrocarbons and fire. It is strengthened by high tensile cords with embedded steel helix wires to avoid kinking on bends or collapsing. This hose is suitable for wet marine exhausts, fuel delivery and hydraulic suction. Its temperature tolerance is -25ºC to +110°C. For sizes up to 50mm ID. SAE J1527/A, ISO 7840 A1 CE.

BLA Code BLA Code S16-272-4000 S16-272-5000 S16-272-6000

Inside Dia. Length mm mm 100 150 125 150 150 200

136060 333330 136062 333334

Internal Length Minimum Dia. Bend Radius mm m mm 38 15 125 38 per metre 125 50 15 170 50 per metre 170

Sierra Transom Exhaust Flapper Valves

Marine Town® Exhaust Outlet

Specially compounded weather and U.V. resistant EPDM rubber flapper valve designed to help prevent water from entering the exhaust system in following seas or when going astern.

Secured using 316 grade stainless steel quick fit hose clamp (supplied).

These highly polished, cast 316 grade stainless steel exhaust outlets include an integral, matte black powder coated stainless steel flapper valve to inhibit water intrusion back into the exhaust system. They also have an ingenious, yet simple collar to keep annoying residual drips away from the hull, thus preventing staining of the hull.

(A)

(B)

BLA Code BLA Code S18-4456 S18-4457 S18-4458

796

Suits Exhaust Flange OD mm 75 100 125-150 BOATING LIFESTYLE ADVENTURE

(A) 333296 (A) 333297 (B) 333298 (B) 333300 (B) 333301

Hose Dia. mm 38 45 50 63 76

Overall Length mm 136 138 115 145 145

Max. Hull Thickness mm 53 53 92 35 35 bla.com.au

Waterlock/Silencer

33

Waterlock/Silencer - 55-90mm

- 40/45/50mm

These European made waterlocks are manufactured from high density polyethylene to a high standard and are suitable for wet exhaust systems having hose diameters ranging from 55mm to 90mm. Simply trim off the stepped tails to the required size to suit the hose diameter of your choice. These waterlocks provide adequate noise suppression for most small to medium propulsion engines and generators. Depending on the relative height of the waterline, care must be taken to prevent water back-siphoning into the engine by installing a gooseneck and syphon break. a

c­­­ a

b

b

333243 c­­­ a

c­­­

BLA Code 333249

Hose Dia. mm 40/45/50

a mm 542

b mm 270

c mm 155

Capacity L 6

HP Max. 50

b

333241

Gooseneck A transom fitted gooseneck provides added engine protection from following seas or when going astern by forcing the water to lift up the gooseneck before being able to enter the engine via the exhaust system. This gooseneck is manufactured from high density polyethylene and suits 40mm, 45mm or 50mm exhaust hose diameters with a 50mm outlet. Simply trim the stepped tail to the required size to suit the hose diameter of your choice. b

BLA Code 333241 333243

Hose Dia. mm 55/60/65 75/90

a mm 660 775

b mm 320 410

c mm 220 290

Capacity L 20 33

ENGINE ROOM & POWER GENERATION

Combination waterlock and muffler manufactured from high density polyethylene to suit engines up to 50HP. These waterlocks are suitable for wet exhaust systems with hose diameters of 40mm, 45mm or 50mm. Simply trim off the stepped tails to the required size and connect the hose with double exhaust clamps as is normal recommended practice of installation for small craft. Depending on the relative height of the waterline, care must be taken to prevent water back-siphoning into the engine by installing a gooseneck and syphon break.

HP Max. 115 150

Exhaust Waterlock Suitable for wet exhausts only. Installed in the exhaust line to prevent water from entering the engine. These waterlocks are made in New Zealand and constructed from durable polyethylene. Inlet side has the option for either top or side entry. Hose tails are stepped to suit multiple diameters.

a

BLA Code BLA Code 333247

Hose Dia. mm 40/45/50

a mm 480

b mm 110

BOATING LIFESTYLE ADVENTURE

333290 333292

Hose Dia. mm 40/45/50 63/75

Overall Length mm 480 710

Overall Height mm 305 420

Width mm 120 135 bla.com.au

797

33

Foam Sound Insulation

ENGINE ROOM & POWER GENERATION

25mm thick sound insulation that contains a tough impervious facing of reinforced aluminium, which provides high sound absorption and guards against dirt, grease, oil and fluids. Ideal for engine rooms or anywhere that requires noise control. Supplied in 30m rolls only.

Features: • Fire retardant to AS1530.3 • Durable tear resistant facing • Impervious to dust, oils, solvents and fluids • Insulates against heat • Heat and light reflective • Self extinguishing • Optional pressure sensitive adhesive backing • Hydrolysis resistant - foam will not rot • Easy to handle and install • Ignition retardant • Excellent mid-frequency absorption • Low installation cost • Long service life BLA Code 335010 335020

Thickness mm Non adhesive 25 Self adhesive 25

Width mm 1400 1400

Roll m 30 30

Foam Sound Insulation - Decoupling Decoupling foam is a composite sandwich material comprising of a flexible high mass noise barrier laminated between two layers of flexible acoustic foam. It increases sound transmission loss and provides sound absorption. Ideal for engine rooms or anywhere that requires noise control. The outer layer of flexi foam comprises foam sound insulation detailed as 335010 above. The base layer comprises of 6mm foam and acts as a decoupling layer which separates the noise barrier and spaces it from the structure. The middle layer is the decoupled noise barrier that adds significantly to the sound transmission loss of the system. The resultant performance exceeds the mass law. Commonly bonded to the structure with spray adhesives.

Features: • Fire retardant to AS1530.3 • Excellent mid to high frequency performance • Resists hydrolysis - foam will not rot • Ignition retardant • Flexible for ease of installation • Reflects heat and light • Resists contamination from dust and liquids • Heat formable • Durable tear resistant facing • Self extinguishing BLA Code 335030

Thickness mm 32

Sheet Size mm 1300 x 2200

Metalised Tape

Insulation Fixing Buttons

Self-adhesive, reinforced aluminium tape to cover butt joints in the range of sound insulation above. High temperature resistance.

Polypropylene discs with domed head and spiked undersurface, used to mechanically fasten the insulation foam sheets above to bulkhead or ceiling. Spikes grip the foam to prevent slippage without damage. Sold individually.

BLA Code 335050

798

Type

Width mm 48

Roll Length m 50

BOATING LIFESTYLE ADVENTURE

BLA Code 335060

Dia. mm 50

Mount Hole mm 3r/h bla.com.au