Business Aviation Magazine Issue 35 - Autumn 2025

AUTUMN 2025

Parts you can trust TROY PALMER - FOUNDER

AIRCRAFT PARTS DISTRIBUTION www.bizavltd.com

LETTER FROM THE EDITOR

AUTUMN 2025

Still sunshine ahead?

W Parts you can trust TROY PALMER - FOUNDER

AIRCRAFT PARTS DISTRIBUTION www.bizavltd.com

Nasim Raja CHAIR Max Raja PUBLISHER & CEO Anthony Harrington EDITORIAL DIRECTOR Noel Barton CREATIVE DIRECTOR Roger Baker BUSINESS DEVELOPMENT DIRECTOR Elle Smith SALES EXECUTIVE Zayn Raja SALES EXECUTIVE Jane Stanbury GLOBAL LUXURY CORRESPONDENT • www.bizavltd.com •

For all enquiries, please contact Max Raja at max@bizavltd.com or on +44 (0)203 865 3736

hen the good times just keep coming, it is easy to forget that we’re all in a deeply cyclical sector. Things are so buoyant right now that one can lose sight of the fact that business aviation has its downs as well as its ups. Right now, however, the upside just keeps on trucking, and the signs are good for a solid end to 2025 and a good start to 2026.

That may be giving a huge hostage to fortune. One has to be mindful of the commentator’s curse. If you are a cricket fan, which, admittedly, not many in North America are, you’ll be well familiar with lines like: “Blogs is batting beautifully, closing in on his/her Test 50. Oh, oops, that’s the middle stump cartwheeling out of the ground.”

As evidence of how buoyant things are, consider the latest report from GAMA on the current state of the general aviation sector. The results for the second quarter of 2025, by comparison with the same period last year, show increased shipments for both business jets and piston aircraft. It also shows an increase in the overall value of aircraft shipments.

Sales of piston aircraft are up just over five percent, with 810 units shipped. Turboprops didn’t fare quite as well, showing a 4.3 percent decrease, but business jet sales were up almost 10 percent (9.9 percent), with 354 aircraft sold. The total value of aircraft deliveries in the quarter exceeded $12 billion, up 9.9 percent.

We are also hearing plenty of anecdotal evidence from our friends and supporters in the industry that more than bear out GAMA’s positive report.

In this issue, Clay Healey, for example, the owner of AIC Title Service, reckons that although 2024 was the firm’s best year ever, they are already 15% up, year on year – “and we haven’t even got to the busy part yet!” he commented.

At the same time, the sector continues to innovate hugely.

Sustainability continues to be a big driver. Brad Streeter, CEO of AERO Specialties, points out in this issue that demand for electric and hybrid ground service equipment is growing by leaps and bounds.

We are pleased to announce that we’ll be holding our NBAA-BACE Networking Event this year at the Hard Rock Cafe, Las Vegas, on Wednesday 15th October. We’d like to give a big shout-out to our event sponsors, without whom the party would not be possible. As usual, it is by invitation only, and our advertisers and sponsors have priority. For tickets, please contact our CEO, Max Raja.

There will be an open bar, and this year features the Club DJ along with a live band. Address: Hard Rock Cafe, Las Vegas; 3771 Las Vegas Boulevard, NV 89109.

Printed in the UK by Print Pro Consultancy Distributed by Seabourne logistics, Asendia, and Aeglobal

ANTHONY HARRINGTON

BizAv Media Ltd is the holding company. Business Aviation Magazine, BizAv Yearbook, BizAv Events, BizAv Maintenance Conference and BizAv Connect are all subsidiaries of BizAv Media Ltd. BizAv Media Ltd. Copyright: © 2025. All rights reserved.

1

Magazines are printed on FSC® certified paper

CONTENTS

Autumn issue 35 2025

54

24 84 14 Going global

30

48 Forward thinking Jane Stanbury talks with David Bienvenu, Global Leader, Maintenance Training, CAE

18 Clear skies ahead?

54 Vision of the future Max Pardo, Founder and CEO of KiPcreating, on transforming visualisation and rendering

62 Going the extra mile Waleed Muhiddin, AMAC Aerospace’s Chief Marketing Officer, on what drives AMAC’s continued success

8

Parts you can trust Troy Palmer, Founder, Aircraft Parts Distribution, on what it takes to be the best in parts distribution

14 Going global Darren Broderick, CEO of Asian Corporate Aviation Management, on his ambitions for the group

18 Clear skies ahead?

Clay Healey, the owner of AIC Title Service, on a record year and, potentially, a good few years to come

24 Global Market Insights Louis Seno, Executive Director, Erika Ingle, Managing Director, and Brendan Lodge, Regional Director to the UK/ EU region, on the global reach and expertise of IADA members

On cloud JetBed 42 30 Innovating to grow the market Larissa Groesbeck-Fringo, Megan Kucel and Tommy Carter, on the teamwork and skills required to build on an already stellar reputation for the company

36 Ahead of the curve Mike Behm, Director of Business Development at Gentex Corporation, on how the specialist automotive supplier is looking to bring the best of automotive innovation to business aviation

42 On cloud JetBed JetBed Founder, Gary Bosstick, on the current status of the iconic JetBed

2

68 Innovative ground support Brad Streeter, CEO, AERO Specialties, on how the company has transformed into a global force

76 Ranking highly Dave Morgan, President, on the rise of Celtic Air Services

80 BMC25 gallery Photos from the conference

84 World-class support Mike Minchow, President, Duncan Aviation, on meeting the skills challenge

90 Supporting aircraft ownership Nick Isbister, Director of Sales, Volare Aviation, on the company’s recent successes

LETTER FROM THE EDITOR

Sustainable Solutions on Your Terms With AvfuelZero, we guide your path to sustainability—assessing emissions, setting targets, creating a reduction plan and delivering clear reports.

Let our ESG experts simplify your journey to net zero so you can stay focused on the flight.

Expert Consultations

Sustainable Aviation Fuel

Carbon Offsetting

Book & Claim

OUR EXPERTISE BRINGS PEACE OF MIND AIRCRAFT INTERIOR DESIGN | ACCEPTANCE AND DELIVERY | AIRCRAFT OUTFITTING COMPLETION CONTRACTS & NEGOTIATIONS | DESIGN ENGINEERING | PROJECT MANAGEMENT MAINTENANCE OVERSIGHT | EXTERIOR DESIGN & PAINT OVERSIGHT When the time comes for a starlink install, fresh paint job, due maintenance, complete cabin refurbishment or a new green completion, trust our team to provide tailored solutions to your aircraft needs. With meticulous attention to detail, our technical oversight and design team will manage your complete project from ideation to completion and delivery. +1 (310) 488-9452 sarah@sarahlarranaga.com

www.sarahlarranaga.com

Skylink Services Ltd is part of the Skylink Group of Companies.

The company is well-established and provides ground handling services for General Aviation Aircraft in Cyprus. We began operations in 1992, filling the gap in the Executive Aircraft ground handling market, at both international airports of Cyprus, Larnaca and Pafos.

LARNACA INTERNATIONAL AIRPORT P.O.Box 43012, CY 6650 Larnaca - Cyprus T: +(357) 24 84 09 00 • F: +(357) 24 66 58 05 E: flightops@skylink.com.cy

24HR OPERATIONS T: +(357) 24 64 33 34 F: +(357) 24 64 35 99

WWW.SKYLINK.COM.CY

PROFILE … AIRCRAFT PARTS DISTRIBUTION

Parts you can TRUST Troy Palmer, Founder, Aircraft Parts Distribution, talks to Anthony Harrington about what it takes to be the best in parts distribution

Introduction

our shipping discipline ensures parts leave the warehouse without delay.

Aircraft Parts Distribution: Building Resilience and Speed into the Aviation Aftermarket

The aircraft on the ground doesn’t care whether the delay is caused by stock, paperwork, or a missed courier pickup.

What matters is that we have the systems to eliminate those delays before they reach the customer.

Business aviation thrives on precision and timing. When an aircraft is grounded for lack of a part, operators and MROs need a solution in hours, not days. Aircraft Parts Distribution (APD), founded in 2023 by industry veteran Troy Palmer, was built to answer exactly that challenge. In just two years, the company has emerged as a trusted supply-chain partner across Bombardier, Learjet, and Textron fleets, serving customers worldwide.

AH: What kind of inventory does APD hold to stay at the top of the parts game?

TP: The key is a balance of breadth and documentation.

We stock for a wide range of business and regional platforms, including Learjets, Challengers, Globals, Citations, Beechcraft, Embraer, and Dassault. But inventory alone is not enough. Every part we sell is supported by an SV+ package with detailed photos, test data, trace information, and the required airworthiness certifications.

Here we talk to the APD leadership team about the company’s origins, its approach to parts availability, and how it is navigating a global marketplace shaped by tariffs, compliance pressures, and evolving operator expectations.

You can have the part in hand, but if the paperwork doesn’t check out, the aircraft still sits on the ground. Documentation is as vital as the component itself.

AH: Let’s begin with APD’s origin and how it rose so quickly.

TP: I built my reputation on GlobalParts.aero, which I founded in 2002 and sold in 2021 to VSE Aviation. That journey gave me an intimate understanding of the challenges operators and MROs face: part scarcity, documentation gaps, logistical bottlenecks, and supply-chain risk. When I launched Aircraft Parts Distribution (APD) in 2023, the goal was clear: bring best practices, newer technology, and sharper responsiveness to the business aviation parts market.

AH: How much does parting out older or retired aircraft help maintain a diverse parts inventory? Are there multiple sourcing strategies in play?

TP: Parting out remains one of the most effective ways to sustain legacy fleets. We acquire and dismantle aircraft, harvesting high-value components that are certified and put back into circulation. This is further supported by the APD Fund, which enables outside investors to participate in aircraft acquisition and harvesting.

Our leadership team is composed of seasoned veterans in sales, finance, warehouse operations, purchasing, and rotable support. That blend enables us to act not simply as a parts vendor, but as a true supply-chain partner, aligning inventory, shipping, and compliance strategies to operator needs.

But this is only one part of the sourcing picture. We also maintain OEM agreements, work closely with repair stations, and manage consignment programs for operators and brokers. The result is a diverse set of supply channels, ensuring resilience even when one stream is constrained.

AH: When an aircraft is grounded and needs a part, time is everything. How does APD manage to respond so quickly — especially for rare or hard-to-find components?

AH: What are the biggest logistical and compliance challenges in getting parts delivered quickly — especially internationally — and how does APD handle them?

TP: We operate under an AOG-first philosophy. We aim to deliver quotes in under 15 minutes, and in-stock parts can often ship the same day. That speed is possible because we carry buffer inventory across major platforms, forecast demand using historic and live market data, and coordinate closely with repair and exchange partners. Just as important,

TP: Shipping is where things often go wrong, but it’s also where a disciplined process can save hours or even days. One of the most common causes of delay is an incomplete purchase order. The more detail customers provide up front, the faster shipments move. That means including service levels, carrier

8

PROFILE … AIRCRAFT PARTS DISTRIBUTION

“ When I launched Aircraft Parts Distribution (APD) in 2023, the goal was clear: bring best practices, newer technology, and sharper responsiveness to the business aviation parts market.”

9

PROFILE … AIRCRAFT PARTS DISTRIBUTION

“ The real secret is discipline. Every part goes through multiple checks before it leaves our building. That way, the shipment isn’t just fast — it’s also right.” account numbers, freight forwarder contacts, and complete end-user addresses. When those details are missing, shipments can stall before they even leave the warehouse.

through slower approval channels. We also stress the value of having more than one carrier available, since strengths vary by region, and a bottleneck at one courier should never halt an AOG shipment.

Email communication is another key element. We encourage customers to keep PO numbers in subject lines, highlight service levels clearly, and include freight forwarders in threads. It sounds small, but when dozens of shipments are moving at once, clarity in communication prevents errors and saves valuable time.

Finally, cut-off times are a constant challenge. Many suppliers close their shipping desks by mid-afternoon, meaning orders placed late in the day risk slipping to the next morning. We mitigate this by preparing early where possible, but also by maintaining extended AOG shipping capacity — even into evenings, weekends, and holidays.

Export compliance is another layer. International orders often require signed End User Agreements and, in some cases, the aircraft serial number. These documents confirm that shipments are not destined for restricted parties and often allow for more efficient routing, such as direct dropshipment from OEM to end user.

The real secret is discipline. Every part goes through multiple checks before it leaves our building. That way, the shipment isn’t just fast — it’s also right.

AH: Tell us about your auction platform and consignment inventory options.

TP: AeroAuction.com has become an important tool for operators looking to convert surplus or aged stock into cash.

By running 30-day auctions with reserve backing, we create transparency and liquidity. Sellers get access to a broad buyer

Carrier authorisation is also critical. When we are added as an authorised shipper on a customer’s DHL, FedEx, or UPS account, labels and customs documents can be generated instantly. Without that authorisation, shipments are forced

10

SM

Sidewall Cestino Rubino Seat Cielo Kite

DISTINCTLY EMBOSSED. EXPERTLY CRAFTED. Introducing Cestino; one of five new, tactile collections. This leather’s versatile texture, two-tone and hand-tipped finish boasts a luxurious, multidimensional appearance. Cestino is roller-embossed on center-cut hides with no plate lines.

Visit garrettleather.com to request samples.

PROFILE … AIRCRAFT PARTS DISTRIBUTION

base and clear reporting dashboards, while buyers gain a new channel for sourcing parts.

longstanding ties to MROs, OEMs, and operators worldwide.

Those connections allow us to arrange exchanges quickly, secure repair capacity when it’s scarce, and offer assurance that parts have passed through trusted channels.

Alongside the auction, we offer a consignment program that allows operators to hand over inventory for us to inspect, catalogue, market, and sell. Parts on consignment are included in our AOG coverage, which means consignors benefit from 24/7 responsiveness without the operational burden.

Predictable payouts — either monthly or 30 days post-sale — give operators clarity in cash flow, and flexible fee structures let them choose the model that suits their needs.

Trust is everything in aviation. Operators give us their AOG calls because they know we won’t just source a part — we’ll stand behind it, documented and compliant.

AH: Finally, what do you feel sets APD apart most clearly in the market?

TP: We may be a young company, but we’ve been built on decades of experience. By marrying deep inventory and strong sourcing strategies with process discipline in shipping and compliance, we ensure that when an aircraft is down, the solution is close at hand.

It’s about taking the hassle out of surplus. Our consignors don’t just see revenue; they see predictability and transparency.

AH: You clearly have deep relationships within the industry. Tell us more about that.

TP: Relationships are one of our strongest assets. Our leadership team’s decades of experience mean we have

The part, the paperwork, and the process — we bring them together so our customers can fly with confidence. |BAM

12

Maintenance: technics@nomadtec.eu | Management & Charter: fly@nomadjet.eu NomadClasicCar.indd 1

www.nomadjet.com

01.07.24 20:15

PROFILE … ACAM ASIA

Going global Darren Broderick, CEO of Asian Corporate Aviation Management, better known as ACAM, talks to Anthony Harrington about his ambitions for the group AH: Darren, can you tell us about ACAM, where it all started, and your role in it?

there. They are an extremely dedicated team made up of a melting pot of the industry’s finest professionals.

DB: I am the founder and CEO of the whole Group, which consists of some 17 companies. We own 100 percent of the company, other than ACAM Pacific, which was formed a few years ago in Australia. I have 50% of that company, along with my partner there.

So, every query and request that comes into our operations anywhere in the world gets routed to the Singapore operations centre. If we get a flight request in the middle of the night in Europe, Asia or Africa, that is where it gets dealt with and solved.

AH: What can you tell us about your fleet of aircraft? Is it fairly mixed, and is it mostly managed aircraft versus your own wholly owned aircraft?

The Group is headquartered in Singapore and is a Singaporean company, although we now have a global reach outside of North America. We were established in Singapore 15 years ago.

DB: We now have a fairly large fleet of aircraft, getting on for 40 in total. It is mostly managed and it is very varied, comprising everything from King Airs to Boeings and Airbus Corporate jets. As you can imagine, that makes the CAMO guys hate me. Whenever I tell them we’ve signed on a new jet, they say, “Tell me it’s a model we already have,” and mostly I tell them no, it’s a new one!

As to the Australian operation, Dane Williams approached me three years ago to suggest we partner to found ACAM Pacific.

I wasn’t really interested in starting an Australian operation myself at the time. When I last left Australia fourty years ago, the business aviation market was very quiet, but it has had something of a remarkable renaissance since and is now an extremely dynamic and exciting theatre to be involved in.

AH: What do you think makes ACAM unique?

DB: Where we differ from other operations is that we are very bespoke and work very closely with our clients. When principals are flying in to or out of the FBO’s, if I’m around, I’m at the FBO waiting for them. We have a really well-tuned team that is very hands-on, as am I.

Dane is the Managing Director and I am the CEO. We operate three bases there. Our HQ is in Melbourne at the magnificent Melbourne Jet Base and we have operational bases in Sydney and on the Gold Coast.

AH: Can you tell us about your group HQ in Singapore?

From Singapore, we service South East Asia, including Indonesia, which is one of our strongest markets. I can say with confidence that we have the largest market share of corporate jets in Indonesia. We have our Dubai office, which

DB: Singapore is the heartbeat of our companies where we have our 24x7 flight support and operations centre. We also have our 24x7 engineering and CAMO support teams

14

PROFILE … ACAM ASIA

“ We now have a fairly large fleet of aircraft, getting on for 40 in total. It is mostly managed and it is very varied, comprising everything from King Airs to Boeings and Airbus Corporate jets.”

15

PROFILE … ACAM ASIA

We have the contract to do flight calibration in Singapore, plus similar contracts around the world. We have contracts with Cambodia and several other countries all over Asia. We do flight calibration for the Kuwait government military bases and numerous contracts in Europe. We have another flight calibration aircraft in South Africa, based in Johannesburg that does all of the African continent Sub-Sahara. A lot of governments do not own their own flight calibration aircraft, so this is a lucrative business that we have built up from nothing.

AH: How are you doing with expanding your business jets profile in Europe?

DB: Two years ago we acquired a company in Germany that will be renamed to ACAM Germany, and we’ve signed up our second aircraft in the UK. We have other deals currently in progress that I can’t talk about at present, but the point is that we are moving further west, with an emphasis on bridging the Asian and European markets continuing the expansion of the company.

handles ACAM Middle East. That office also looks after our Africa operation, where we have managed aircraft in South Africa. We had some managed business jets in the Sudan, but for obvious reasons, they are now all based back in Dubai.

AH: And you’ve still got plenty of appetite for business?

We have two companies in San Marino, where we work very closely with the Colindres family. We worked together with San Marino to develop a new set of Civil Aviation regulations for Commercial specialised operations, (CAR-SPO) similar to a commercial airwork operation. We are also in the advanced stage of finalising our San Marino AOC.

DB: Absolutely. For me, business is not about making money; it’s an absolute passion. Aviation has been my life, I’ve been flying since I was 16, and at age 18 I had both my commercial helicopter and my commercial aeroplane licenses. I think I still hold the Australian record as the youngest person to achieve this.

We have an excellent business that does flight calibration and inspection for airports all around the world. This involves routine calibrations and inspection of airport and enroute navigational facilities, airport lighting systems and any interference factors that may affect aircraft navigation on approach, landing and departures.

My son does a lot of the travelling with me now. He’s 17 and following a business degree will be doing his flight training with Emirates. He’ll be joining the company at some point with a view to eventually taking over from me.

My philosophy has always been that hard work gets results, and I enjoy it thoroughly. My two mentors in business, the men who helped me to develop from a senior pilot to a businessman and entrepreneur, exemplified this. Both worked into their 80s. I was discussing deals with one of them right up to the day before he died. The other also died in his office.

They both worked to the end and thoroughly enjoyed it! |BAM

For example, Schiphol Airport in the Netherlands had an area of vacant land adjacent to the runway, where a solar farm to been placed there. What happened was that pilots found themselves distracted by the glare coming off some of the panels when the sun was at certain angles.

16

THE OMNIA

with Harrods Aviation - Luton $ɔʦȦʟȲȲʰ ɫʹ˗ʹʟ˘े $ȲɅɔɷȲȬ ȥ˘ ȬȲʰȉɔɫे Since unveiling The Omnia at its Luton FBO, Harrods Aviation has seen the name truly come to life. Inspired by the Latin for “all”, The Omnia embodies a complete, world-class service.

Discreet luxury, refined design and attention to every detail.

Whether relaxing in the lounge, travelling with pets, or enjoying the services, The Omnia experience feels uniquely tailored, every time.

¤ȎDZ uȳȶȓLj ȓɥ ȳɀɞDZ ɯȎLjȶ Ljȶ > uԱ ȓɯ ȓɥ Lj ɥʗȳǤɀȪ ɀȄ ɥDZɞʐȓǥDZ ʑȓɯȎɀɸɯ ǥɀȳɛɞɀȳȓɥDZԧ ǥɞLjȄɯDZǫ Ȅɀɞ ɯȎDZ ʑɀɞȪǫ՟ɥ ȳɀɥɯ ǫȓɥǥDZɞȶȓȶȅ ɯɞLjʐDZȪȪDZɞɥԬ

CONTACT STANSTED OPS:

CONTACT LUTON OPS:

T: +44 (0)1279 665312

T: +44 (0)1582 589317

E: ʦʰɷʁʜʦਨɏȉʟʟʁȬʦȉˑɔȉʰɔʁɷेȦʁɴ

E: ɫʰɷʁʜʦਨɏȉʟʟʁȬʦȉˑɔȉʰɔʁɷेȦʁɴ

PROFILE … AIC TITLE SERVICE

“ People tend to blow the impact of the discount out of all proportion. With mid to large private jets, if you are in the market for a new jet, you are going to buy it anyway, regardless of whether or not there is a discount.”

Clear skies ahead?

Clay Healey, the owner of AIC Title Service, talks to Anthony Harrington about a record year and, potentially, a good few years to come AH: How has 2025 been for AIC Title Service so far this year, Clay?

CH: We are busy as hell. Last year was a great year for us, and we are up 15 percent year on year already. Plus, we haven’t even got to the really busy part yet.

AH: How much is this down to the recent extension to the 100 percent tax write-off on private jets?

CH: It might have had some effect in the US, but people tend to blow the impact of the discount out of all proportion.

With mid to large private jets, if you are in the market for a new jet, you are going to buy it anyway, regardless of whether or not there is a discount.

At the high end, I can’t see the write-off having more than a 5 to 10 percent positive impact on transactions. Where it will have an impact is on the low end of the market, where people usually don’t have the same deep pockets. At the low end, if the discount had not been continued, it might have knocked sales back possibly 30 to 50 percent.

18

PROFILE … AIC TITLE SERVICE

AH: What of the tariffs? Is that likely to dampen things going forward?

That said, I welcome the current push to get more of what we need built in this country. Globalised supply chains started because in the mid- to late 1900s, companies found out that US companies could get stuff made abroad for pennies on the dollar.

CH: I do not see the tariffs mattering much. The OEMs are going to have to eat most of the price increase in their new jets. This may amount to a three to four percent additional build cost for them, but I can’t see them trying to pass that increase on to potential buyers.

However, what we found out in spades with COVID was that when you outsource your supply chain abroad, you are

19

PROFILE … AIC TITLE SERVICE

hugely vulnerable to supply chain disruption. If the flow of parts that you need stops for any reason, be it through a pandemic or through geopolitical factors, your product chain stops, and you’re in deep trouble.

of the people in America want to see improved security and America making stuff that Americans buy. It’s that simple.

AH: We’re seeing a lot of deregulatory efforts from the current Administration, which appears to be pushing back against some of the previous administration’s policies. Is that good for business?

So, from one perspective, globalisation might seem a really good idea, but it is sure as hell a seriously risky model to base your business on when you are producing stuff. The US needs to step back and say we are the one economy in the world that everyone wants to buy stuff from, so why are we not making everything here? Let the rest of the world produce whatever they want and sell it to whoever they want.

The fact is that they won’t be selling much of it to us in the near future because we’ll be buying from ourselves!

CH: Absolutely. Look, I am all for clean air and clean water, and I support sensible efforts to ensure that we have both. But no one needs over-regulation. What is driving the current wave of business in the US is that growth is back on the agenda. The business folks I talk to are confident that growth is going to happen. People are putting a lot of money into the facilities they are building, and if you do that, then you have to travel a lot more. That has to be great for business aviation.

As things are right now, if we didn’t buy from China, then China would be totally bust. What people tend to forget is that there is a hell of a lot of productive capacity in the US that has been mothballed for years. Sure, it will take a year or so to get that mothballed plant working again. However, once you’ve renovated the stuff that’s gone to sleep and have brought it back to full production, the whole area those plants are in starts to show economic growth again.

What cracks me up is that people outside the US just don’t get how big, geographically, the US is. The State of Texas, for example, by itself is bigger than France, which is the largest country in the EU! Hell, New Hampshire, which is one of our smallest states, is bigger than Switzerland, and you could put New Hampshire into Oklahoma four times at least.

My point is that general aviation is so important, given the sheer scale of the USA. If you wanted to drive from Houston to Amarillo, it would take five hours just for a one-way trip. If you are serious about doing business across even one state, you need at least a small aircraft.

For me, the US has turned the corner, and I don’t see us going back again, not for the next three and a half years, that’s for sure. Politicians on both sides need to realise that 80 percent

20

0 $ 1 $* ( 0 ( 1 7 _ & + $ 57 ( 5 _ & 5 (: , 1 * _ 0 $ , 1 7 ( 1 $ 1 & (

([FHOOHQFH UHGHILQHG

6<%$-(7 &20

PROFILE … AIC TITLE SERVICE

AH: We saw what happened when people got ‘grounded’ because of COVID. As soon as the restrictions came off, there was a boom in private flying. That’s kind of normalised now. How is that playing for you?

AH: Clay, you’ve been leveraging technology massively in your platform for AIC Title Service. You started well ahead of the game. Is there any sign that the competition is catching up?

CH: A ton of people bought planes in 2021. We were up 22 percent, year-over-year. That was a tremendous amount of growth for a single year. Think about it. All the aircraft bought during 2021 are now four years old or heading that way. That is about the time that people think of upgrading their aircraft. So, many of those planes are either already on the market or will soon be. That is part of the activity growth that we are already seeing in 2025.

CH: Nope. I am seeing some web-based platforms out there. They are great for some things, but not for the technical knowledge that you have to pass back and forth between buyers, sellers, and everyone involved. You must have software that you can design and develop, and run off your own servers, and I’m just not seeing that.

If the competition started today, it would take them a decade to catch up to where we are now, and by that time, we’d be a long way further forward. So no, they are not even close.

AH: What is happening as far as new pilot training is concerned? Are we seeing enough numbers to counteract the shortfall that everyone is mentioning?

Our Artificial Intelligence is working fantastically. We brought blockchain technology and AI into the platform, and that is really bleeding edge. My goal is to keep pushing for maximum efficiency in handling transactions and to keep growing.

CH: All the flight schools I know of are really active.

However, the cost involved in getting your licence is a huge obstacle. You are talking about people having to find around $100,000 for the training if you are going to go on to get an airline pilot’s license. Plus, you are going to have to put a load of money into renting a plane to get the hours in.

This has huge benefits for our clients. One of our largest clients does around 600 transactions a year through us. They are quite clear that there is no way they could handle that number of transactions without our platform to help them.

The brokers who want to achieve greatness have moved over to us or are moving over. Those who want to continue doing things the old way, God bless them and good luck.

One of the real stupidities in all this is that after the Colgan Air Flight 3407 accident in 2009, which crashed near Buffalo, New York, with 50 deaths, the regulators raised the number of flight hours required from 300 to 1500. That was a fivefold increase and hugely unnecessary in my view. The crash itself wasn’t even about a lack of training.

AH: How is Eric Lewin getting on with AIC Global Solutions, your European arm?

CH: Eric is doing fantastically and has a lot of things going on. There are not as many aircraft deals in Europe, but we are picking up a nice share of that business. At the same time, there are a lot of transactions that Eric is doing that have nothing to do with aircraft. These are big-ticket asset transactions of all sorts, so he is doing a fabulous job there. |BAM

I could see doubling it to 600, maybe. But raising the requirement to 1500 hours just guaranteed that we’d be short of pilots for years to come. I’ve been flying for decades, and I would guess my total flight time is only twice or two and a half times that figure. It is just not realistic. They over-egged it hugely, and it has really slowed down people from entering the industry.

22

³Á XnXÁç z( ! xI «Á Xz Èz!0«Á Xz ÁXx0³ 0ɴȵƺȸǣƺȇƬƺ àX¨ ƬǝƏȸɎƺȸ ɀƺȸɮǣƬƺɀ ɯǣɎǝ 0ƬǼƏǣȸ ƏǣȸƬȸƏǔɎ ƏȇƳ ɎȸƏɮƺǼ ɀƏǔƺǼɵً ƏɮȒǣƳǣȇǕ ȒɮƺȸƬȸȒɯƳƺƳ ɎƺȸȅǣȇƏǼɀِ

ƺƬǼƏǣȸِƏƺȸȒ

PROFILE … IADA

Lou is S eno

Erika I ngle

Global Market Insights: A Conversation with the Professional Staff at IADA Louis Seno, Executive Director, Erika Ingle, Managing Director, and Brendan Lodge, Regional Director to the UK/EU region, talk to Anthony Harrington about the global reach and expertise of IADA-accredited dealers and certified brokers AH: Thank you all for speaking with me today, Louis, Erika, and Brendan. IADA reinvented itself as an organisation in 2018 to stress its current focus on being international in scope, as opposed to its historic roots as a North America-focused association. How is that going?

AH: Could you tell us what sets IADA apart in the aircraft brokerage and dealer world?

LS: Certainly. IADA is the world’s only organisation providing independent accreditation and certification for aircraft dealers and brokers and verification for other professionals who aid business aircraft transactions. We vet professionals rigorously, no self-proclaimed expertise, only verified competence, so clients work with dealers and brokers that are held to the highest standards.

Lou Seno (LS): I took up my present position in IADA on 1 January this year with a firm sense that we need to expand our international footprint. This is something IADA has been working on since we rebranded in 2018. Brendan came on board on 1 June to assist with this effort. He has a tremendous background in aircraft lending and transactions.

We are now up to over 60 accredited dealers, by which I mean brokerage companies, and these companies include hundreds of IADA-Certified brokers.

AH: That commitment to professionalism is clearly foundational. How do IADA clients deliver value to buyers and sellers in terms of aircraft inventory access?

Erika Ingle (EI): Through AircraftExchange.com, our exclusive, members-only platform, dealers and brokers list

24

PROFILE … IADA

“ Via AircraftExchange and our IADA Quarterly Market Reports, our members give clients exclusive access to powerful market data, accurate valuations, and professional insights. This intelligence supports better pricing, smarter decisionmaking, and more efficient and faster transactions.”

B re nd an Lo d g e

- B rendan Lo dge

premium aircraft before they reach the general market. Only IADA-accredited professionals can list, so users gain first access to top-tier inventory in a trusted environment.

AH: Excellent. Beyond exclusive listings, what kind of market intelligence does IADA offer?

Brenden Lodge (BR): Via AircraftExchange and our IADA Quarterly Market Reports, our members give clients exclusive access to powerful market data, accurate valuations, and professional insights. This intelligence supports better pricing, smarter decision-making, and more efficient and faster transactions.

25

PROFILE … IADA

AH: It seems the network offers real efficiency. Can you elaborate on how IADA speeds up transactions?

When owner pilots are looking to sell or upgrade to a new aircraft, they have the opportunity to work with IADAaccredited dealers. These owner pilots can have confidence that the brokers they are working with are aligned with their values and have ethical working standards.

LS: IADA transactions move faster because they happen within an elite professional network. Working with accredited dealers and brokers and knowledgeable support providers reduces delays and complexity compared to dealing with unvetted parties. IADA transactions average 19% less time to complete compared to the industry average.

As everyone in business knows, it is a truism to say that time kills deals. So, speed matters when you are looking to close transactions.

AH: That level of reach and performance is impressive.

Reputation and ethics must be central. How does IADA ensure ethical standards?

BL: Our members strictly adhere to a formal Code of Ethics, ensuring honesty, integrity, transparency, and full disclosure throughout each transaction. Accredited dealers and brokers are held accountable both by their peers and by IADA, a higher level of oversight that non-members simply can’t duplicate.

AH: Supporting member companies across the globe is key. How broad is IADA’s international network?

BL: IADA is truly global. Dealers and brokers do business in Europe, North America, Latin America, Asia Pacific, the Middle East, and Africa. As of mid-2025, our members account for about 17% of the world’s dealers, yet they represent more than half of the annual pre-owned aircraft dollar-volume transactions.

AH: Continuous development is crucial in a dynamic industry. How does IADA support ongoing professional expertise?

LS: Accreditation isn’t a one-time event; members re-accredit every three years, and engage in continuing professional development, including education via our IADA U platform. This ensures members remain current on best practices and industry trends.

EI: And we’re keen to reach out to other industry groups, like GAMA, NBAA, EAA and other international aviation groups in Europe, Asia, and Africa. We have had great success with owner pilots. The Embraer Jet Operators Association is already affiliated with us, as is the Pilatus Owners and Pilots Association. We have others planned.

j e t AV I VA , 2 0 2 0 Cessn a C it at io n C J 3+ O n A i rcra f t E xchan g e. co m

AH: What overarching mission guides IADA today?

LS: Our mission is to be the recognised leader in setting

“ IADA transactions average 19% less time to complete compared to the industry average. As everyone in business knows, it is a truism to say that time kills deals. So, speed matters when you are looking to close transactions.”

@dbfoto.com

- Louis S eno

26

AIRCRAFT SALES & ACQUISITIONS A LEGACY OF EXPERTISE, INNOVATION AND RELIABILITY SPANNING 69+ YEARS. At Duncan Aviation, we understand that buying or selling a private jet is not just a simple asset transaction, but part of a bigger picture. As your vital advisors, we take the time to truly understand your goals and offer thoughtful insights, market intelligence, operational expertise, and comprehensive support solutions for your entire ownership experience. Our team’s dedication and vast network of industry connections ensure that every decision you make is thoroughly informed, aligning perfectly with your unique mission and aspirations.

www.DuncanAviation.aero/aircraftsales

PROFILE … IADA

standards for efficient, effective, and ethical business aircraft transactions. We serve business aircraft owners worldwide by promoting transparency, professionalism, and informed markets, ultimately to increase business aircraft ownership and usage globally. Our members clearly set the bar very high in our industry.

Gl o b a l W i ng s , 2 022 Gu lfst ream G500 O n A i rcra f t E xcha n g e. co m

AH: In summary, what would you say are IADA’s defining pillars?

LS: We are setting the global standard for business aircraft transactions through five key pillars: 1. Exclusive Accreditation, only vetted professionals set a high trust standard.

El l iot t J e t s , 2 0 0 6 Cessn a C itatio n XLS O n A i rcra f t E xcha ng e. co m

2. Top-Tier Inventory Access, AircraftExchange provides premium listings.

3. Superior Market Intelligence, through reports and data tools.

4. Global Reach, connections across major aviation markets worldwide.

Avpro I nc , 2 0 2 0 Gu lfst ream G550 O n A i rcra f t E xcha ng e. co m

5. Ethics and Education, mandatory codes and continuing learning ensure excellence and transparency.

AH: Thanks so much, Lou, Erika, and Brendan.

You’ve provided a comprehensive view of how IADA elevates the aircraft resale industry through accreditation, exclusive data-led strategies, global networks, ethical rigour, and professional development. It’s clear why IADA stands apart in this space. |BAM

“ When owner pilots are looking to sell or upgrade to a new aircraft, they have the opportunity to work with IADA-accredited dealers. These owner pilots can have confidence that the brokers they are working with are aligned with their values and have ethical working standards.”

- Erika I ngle CFS J e t s , 2 0 0 7 P i ag g io Av an t i P- 180I I O n A i rcra f t E xcha ng e. co m

28

Innovative Aircraft Handling in Zurich

EXECUTIVE GROUND HANDLING | CREW & PASSENGER SERVICES | & MORE

www.cat-airservice.com

www.linkedin.com/company/cat-air-service

PROFILE … TOWNSEND LEATHER

Innovating to

grow the market Larissa Groesbeck-Fringo, Megan Kucel and Tommy Carter, on the teamwork and skills required to build on an already stellar reputation for the company

Q

: Megan, let’s start with you. How long have you been with the company, and what can you tell us about your role?

MK: I’ve been with Townsend Leather for eight years. I do graphic design and run our quilting machines, which prepare the leather by stitching a series of designs onto the leather with a foam backing that gives it dimensionality. Just last year, we got the newest technology out there, and it has really enabled us to expand our capabilities.

We do major work for OEMS, stitching new patterns into the leather, which we produce as panels. Everyone knows how to do diamond shapes, but I use my graphic design skills to create completely different looks in the leather. We can do different thicknesses of foam and create wholly new designs.

Laris s a G ro es b eck- Fr i ng o

30

PROFILE … TOWNSEND LEATHER

M e ga n Ku cel

Tommy Car ter

At the same time, we are also doing work outside of business aviation in the luxury motor coach market, as well as in the hotels and hospitality sector. We benefit hugely from wordof-mouth referrals, and it is really driving the business.

concentrate on seat backs for standard quilting diamond shapes. This would be just where the passenger’s back reclined against the seat. Now we are increasingly seeing demand for quilting patterns on the seat bottom panels as well, and we definitely expect to see more of this.

Q: I get that the latest quilting machine technology opens up new possibilities. What changes are you seeing in demand as a consequence?

Q: I know Townsend Leather has a whole range of colours available. Are grey and beige still the favourite colours?

MK: Until recently, designers and owners tended to

MK: We see constant demand for grey and beige. But we

31

PROFILE … TOWNSEND LEATHER

can change things up with contrasting coloured thread to make things pop, or even use two or three different coloured threads on the same panel to create really interesting effects.

Our machine allows us to switch the threads as required.

We already do this for several of our OEM customers. This is a big step forward for the industry and for us.

Q: Being a natural product, leather has its flaws, yet customers expect to see a perfect finish. How is that achieved?

In all, we already have some 60 different patterns we can provide. Or we can design bespoke, abstract patterns inhouse. I will draw the pattern myself with the machine. The client can bring in a small picture of a design that they like, and we can produce that for them.

LG-F: That is Tommy’s role. Tommy has been at Townsend for about 10 years now, and most of that time has been him working in our Cutting department. I’ll let him talk about what this department does.

Q: Larissa, can you tell us about your role?

TC: We grade the hides on a table that simulates a stretch frame. It creates a vacuum that sucks the hide down and keeps it taut. Then we use a special pen to mark up all the blemishes and characteristics. Then the cutting machine scans the hide and places the patterns to be cut on the hide, and it then cuts these parts or patterns out of the hide, ensuring that it removes all the blemished parts. It is a process that allows us to use as much of each hide as is possible. It allows us to make better decisions than our customers in upholstery shops could if they were just hand-cutting the hide. It gives a fixed cost per seat or ship set, cuts down on shipping costs as we can ship these cut parts in smaller “pizza-sized” boxes than large boxes of rolls of hides, and it saves so much time in upholstery shops. They receive ready-to-stitch or assemble cut parts instead of hides they have to spend hours cutting themselves.

LG-F: I’ve been with Townsend Leather for going on 12 years now, in customer service, then in scheduling and now in project management in the cutting and quilting departments.

A lot of my role is working with our team to come up with new and innovative ways to customise materials for our customers and to ensure we are meeting delivery lead times at the same time.

We want customers, such as designers and completion houses, to know that they can send us their schematics for the leathers they want to use, and we can do all the cutting for them. Upholstering requires all sorts of different cuts, and we can do all that for them here. That saves them hours of work.

32

R em em b e r !

Talk to CTT about =jb^Y^ÃZg Dc WdVgY djg ÄZZi LZ XVc ^begdkZ our customers health! haZZe

^bbjcZ hn hi Zb

iVh iZ VcY hbZaa

lZaa"WZ^c\

humidit y levels

PROFILE … TOWNSEND LEATHER

Towns end Leat her Cut t ing & Q uilt ing Team

LG-F: Of course, by using more of the hide with the aid of the computer, we are also cutting down on waste. So this means that it reduces the number of hides that a customer will have to order when doing a refit or new completion on an aircraft.

This industry is all about how many aircraft an OEM can deliver each year. They all have long order backlogs. So, they all want solutions that enable them to save time and expense.

With what we do, they can make seats and panels quicker than they could without our cutting solutions.

I’d point out, too, that quilting is a need that impacts a number of industries, not just aviation. High-net-worth individuals buy top-of-the-range luxury cars. Some like the patterns they see in their cars so much that they want the same thing for their aircraft. We can work with a simple picture that they send in. We’ve even had people send in photos of their favourite handbag!

Q: How important are the big shows like NBAA for you when it comes to getting the word out about what Townsend Leather can do?

MK: Our Sales and Marketing Team will be showing a lot of brand new patterns we designed recently at NBAA on our booth. People who come to the stand will be able to see the wide range of quilted patterns. Also, we are premiering the quilted & perforated patterns that we can also now provide. It’s a great way to get immediate feedback from designers or to get them and their clients excited about new design possibilities.

LG-F: Most of the people that we meet at these shows are really important. What we see is that there has been a real change in the types of people who come to these shows.

Fewer people are unconnected with the industry and are just enjoying the show. Most of those coming to the stand already have serious projects in hand or coming up, and they want to explore new ideas for upgrading aircraft interiors. |BAM

34

WWW.STSAVIATIONGROUP.COM | +353 61 717171 | SALES@STSAVIATIONGROUP.COM

PROFILE … GENTEX CORPORATION

Ahead of the curve Mike Behm, Director of Business Development at Gentex Corporation, on how the specialist automotive supplier is looking to bring the best of automotive innovation to business aviation

Introduction Gentex is first and foremost a technology company, proficient in a wide range of core competencies that yield a unique fusion of technologies. The company is a long-time supplier of electro-optical technologies. It currently develops and manufactures custom, high-tech electronic products for the automotive, aerospace, and commercial fire protection industries, with growing competency in the medical field. driving safety. It’s best known for inventing the automaticdimming rearview mirror, an active safety feature that combines sensors, chemistry, and algorithmic decisionmaking to detect and eliminate dangerous rearview mirror

Within automotive, Gentex supplies nearly every major automaker with connected-car technologies and advanced electronic features that optimise driver vision and enhance

36

PROFILE … GENTEX CORPORATION

glare. Today, Gentex ships over 44 million dimmable devices annually; however, its innovation doesn’t stop there.

thin glass laminates engineered for aircraft cabin partitions, mirrors, and wood veneer applications. The company is also raising the in-flight experience with concept technologies, helping to drive innovation and improve the performance of the aviation industry, making air travel safer, more comfortable, and more efficient for passengers and crew members alike.

Some of these technologies include biometric authentication, which allows for a personalised in-flight experience, and intelligent aircraft cabin lighting, providing light when and where it’s needed. Additionally, comprehensive environmental sensing units monitor cabin air quality for increased safety during the boarding process and during air travel.

Within aerospace, the company is best known for supplying aircraft manufacturers with electronically dimmable windows that darken on demand to cut sunlight while still providing an exterior view. They improve the flying experience, aircraft design flexibility, and enable airlines to give their customers and crew more control over the view out of their windows.

New to the Gentex aerospace portfolio is a unique glass laminating technology that yields durable, lightweight, ultra-

7SmR nkȧ v`nɅjK S^ KuhKjm R>^IkȦ >ib\]`` ;j]Uh]cb ghUbXg cih Ug U hcd h]Yf GLI ZUW]`]hm `cWUhYX Uh FcbXcb Mcih\YbX ;]fdcfh h\Y cb`m U]fdcfh ]b FcbXcb OE h\Uh cdYfUhYg Zfca ҉ U a hc ҄ ҆҃ U a k]h\cih Ubm g`ch fYghf]Wh]cbg QY gdYW]U`]gY ]b GU]bhYbUbWY BUb[UfU[Y ]b FcbXcb ;IA LYWcjYfm NYUf >ckbg JfY JifW\UgY CbgdYWh]cbg ;]fWfUZh GUbU[YaYbh DYh MU`Yg Q]h\ cjYf ҄҃​҃ mYUfg cZ WcaV]bYX Uj]Uh]cb YldYf]YbWY WcadYh]h]jY fUhYg UbX U Zf]YbX`m hYUa mci WUb hfigh h\Uh Uh >ib\]`` ;j]Uh]cb mci fY U`kUmg ]b YldYfh \UbXg

ջ҇​҇ Ҋ҇҈҉ ҋ҆Ҋ҇҈ҋ cdYfUh]cbg:Xib\]``Uj]Uh]cb Wca

kkk Xib\]``Uj]Uh]cb Wca

37

PROFILE … GENTEX CORPORATION

“ Without a doubt, at the top of the list are our electro-dimmable products.

We have made huge advances in glass and film-based dimming technologies.

We have been producing electro-optical products for the global automotive industry for many years.”

Q: In 2019, at EBACE, Gentex showed its first solution for electrically dimmable windows in business aviation aircraft with curved rather than flat windows. How is that progressing?

Our general approach is to engage in conversations and then work up a proof-of-concept product, perhaps with partners.

With the aviation sector, what we are looking for is to begin with the most persuasive and advantageous fits with our existing product lineup.

MB: Entering a new market is always challenging. We are extremely well known for our portfolio of innovative technologies for the automotive industry. OEM focus on launches of new platforms/aircraft, combined with shifts in priorities for the industry (SAF, range, etc), have added to the challenge but we remain confident that there are significant opportunities for premium cabin technologies with Gentex technology offerings.

Without a doubt, at the top of the list are our electrodimmable products. We have made huge advances in glass and film-based dimming technologies. We have been producing electro-optical products for the global automotive industry for many years.

As a result, we reprioritised and refocused and we now have a renewed push to increase our traction with the business aviation market.

We supply nearly every automaker around the globe with vision, dimmable glass, sensing, and connected-car technologies that optimise driver vision while enhancing driving safety and

38

E L E…VGENTEX AT E CORPORATION YO U R I N - F L I G H T E X P E R I E N C E PROFILE

The World's Best Aviation Sleep Solution.

JetBed offers the most comfortable in-flight sleep experience, allowing passengers to lie completely flat without grooves or contours in the mattress. The new JetBed Blue Series reduces the packing size of the JetBed when not in use by approximately 70% for effortless storage, making it the most compact sleep solution available on the market by far. When not in use, it stows easily in cabin or luggage compartments, freeing up space without compromising comfort.

J E T- B E D . C O M

858 530 0032

D A N T E @ J E T- B E D . C O M

PROFILE … GENTEX CORPORATION

comfort. We are well advanced in the technologies required to produce electrically dimmable curved aircraft windows.

We have biometric products that would allow a high degree of personalisation for VIPs in the cabin, including the owner and their family. Of course, such products raise concerns for business aviation regarding privacy and data protection and we are working with the industry to explore use cases that are safe and secure.

Q: What other technologies do you see as being able to carry across from the high-end automotive sector to business aviation?

MB: To summarise our core skills, these comprise the ability to design and programme sophisticated sensor and biometric technologies to produce a range of outcomes that improve cockpit and cabin safety or enhance and personalise the passenger experience.

Q: What have you been doing to show your products to potential aviation customers?

MB: In recent aviation exhibitions, we’ve showcased our products in a bespoke aircraft fuselage simulator. This year, recognising that the big aviation exhibitions like NBAA and EBACE are undergoing some far-reaching changes, we are adjusting our strategy somewhat. The booths are now visited much more by experienced professionals who are part of the aviation sector. This makes for more specific and more productive conversations. We will be showing a range of products with real benefits to the business aviation sector on our booth (the West Hall — booth 1205). |BAM

We have smart lighting products, and we also have camerabased motion sensing technologies. In the automotive industry, these tend to focus on driver safety and driver attention. There are obvious applications in the cockpit, where it would allow ground staff, for example, to see what the pilot was paying attention to. If the cabin crew were showing undue attention to a particular gauge, for example, that could be a concern, and so on.

40

PROFILE … GENTEX CORPORATION

PROFILE … JETBED

“ Setup and takedown take just minutes, with beds inflating and deflating quickly from our lightweight, portable travel bag.”

On cloud JetBed JetBed Founder, Gary Bosstick, on the current status of the iconic JetBed impractical for crews to manage. That inspired me to create JetBed — a solution that brings the comfort of home and the luxury of a five-star hotel into your aircraft, that is simple to set up and compact enough for limited cabin storage.

Introduction Quote from the Founder of JetBed, Gary Bosstick: GB: As a pilot flying my own CJ3, I wanted my wife to feel truly comfortable when we travelled together. I quickly realised that even the most luxurious private jets lacked one key element: restful sleep.

Q: What sets JetBed apart from other in-flight sleep solutions in terms of size, convenience, and ease of use?

GB: Most private aircraft have limited cabin and storage space. Traditional berthing seats and bedding systems take too long to set up, create uneven sleeping surfaces that are uncomfortable for side sleepers (who make up over 90% of

Traditional berthing seats were uneven, uncomfortable for side sleepers, and big and bulky, which made them

42

ACCREDITED DEALERS. VERIFIED LISTINGS.

ONE PLACE TO FIND both.

Your search begins at AircraftExchange.com The most trustworthy aircraft marketplace.

Exclusively featuring IADA Accredited Dealers.

PROFILE … JETBED

Q: Can you walk us through the patented inflatable technology and how it achieves both firmness and durability while remaining highly portable?

GB: The magic of JetBed is in its patented inflatable design, which provides the firmness and uniform support you’d expect in your own bed at home. There are no grooves, gaps, or pressure points, just even weight distribution across the entire surface for exceptional comfort, whether you sleep on your back or your side.

Our patented vacuum bag technology allows JetBed to pack down far smaller than any other option on the market, making it the most compact sleep solution available. This unique combination of superior comfort and unmatched space efficiency is why JetBed has become the trusted choice for private aviation worldwide.

JetBed Conference Group travellers), and worst of all, they take up far too much cabin or luggage space when stored.

Q. Luxury is clearly central to JetBed — how do your linens and bedding choices help recreate a five-star hotel experience inside a private jet?

JetBed solves all of these challenges. Setup and takedown take just minutes, with beds inflating and deflating quickly from our lightweight, portable travel bag. Our patented design creates a completely flat sleeping surface, delivering restorative rest like no other product on the market.

GB: Luxury isn’t just about appearance, it’s about the way something feels. At JetBed, every detail of our linens and bedding is crafted to bring the indulgence of a five-star hotel into the sky.

Our custom-fitted linens are hand-sewn in our California factory to precisely match the contours of each custom JetBed, including sidewall configurations, seat width, and spacing.

The linen fabric itself is sourced directly from Milan, Italy, from the same supplier trusted by some of the world’s most

With our latest innovation, the JetBed Blue vacuum bag, we’ve reduced the packing size of the JetBed by up to 70%, making it the most space-efficient sleep solution in the industry.

Passengers and crews can focus on the journey, not the logistics.

JetBed Blue vs. JetBed Original

44

PROFILE … JETBED

iconic luxury hotels, including One&Only Palmilla, George V Paris, and Hotel de Crillon.

giving them the ability to rest as deeply in the air as they do at home. This real-world feedback has helped build JetBed’s reputation as the gold standard for in-flight comfort.

To complete the experience, we pair these linens with comforters and pillows made in Nebraska by Ogallala Comfort from premium white goose down and natural milkweed fibre. These materials are naturally hypoallergenic, free from synthetics and chemicals, and are incredibly breathable, creating a cloud-like sleep experience at 40,000 feet.

Q. What new developments are you working on, such as the travel bag, and how will they improve the JetBed experience for customers?

GB: Innovation has always been part of JetBed’s DNA. The launch of our JetBed Blue Bag was a major milestone, reducing the packed size of JetBed by up to 70% so it takes up minimal cabin or luggage space when stored, a critical factor on private jets with limited storage.

Q: You’ve had some unique exposure recently, including being featured in MrBeast’s video — how has feedback from high-profile users and pilots shaped JetBed’s reputation?

GB: It’s been exciting to see JetBed featured in MrBeast’s video, but what matters most to us is the feedback we receive directly from the people who use our products every day: pilots, crews, and passengers.

Looking ahead, we’re developing a next-generation bag that will hold not just the JetBed, but also its linens, pillows, and comforter, all without increasing the packed size. This all-inone solution will make storage and setup even more seamless for crews and passengers. Additionally, we are steadily designing JetBeds for the newest aircraft we’ll see entering the market in the future.

MrBeast’s pilot said JetBed would be “essential for surviving 100 days living in an aircraft” and described sleeping on it as “like sleeping on little baby clouds.” That sentiment echoes what we hear from customers worldwide.

In the past year, we’ve also expanded our product line to include duvets, comforters, and pillows, giving customers a complete bedding system designed exclusively for private aircraft. Each innovation brings us closer to our goal: making sleep at 40,000 feet as effortless and restorative as it is at home. |BAM

Pilots & Flight Attendants tell us JetBed simplifies their work by cutting down the time needed to prepare sleeping arrangements mid-flight. Passengers say it’s life-changing,

“ MrBeast’s pilot said JetBed would be “essential for surviving 100 days living in an aircraft” and described sleeping on it as “like sleeping on little baby clouds.” That sentiment echoes what we hear from customers worldwide.”

46

PROFILE … CAE

“ Our 2025 CAE Aviation Talent Forecast predicted that 416,000 new maintenance technicians will be required by the global aerospace sector by 2034, and of these, 69,000 will be needed in business aviation.”

Forward thinking CAE is recognised worldwide for its leadership in aviation training, has a strong reputation for designing and manufacturing full-flight simulators, and today trains more pilots than any other company. However, the technology-forward company also provides business aviation maintenance training. Jane Stanbury talks with David Bienvenu, Global Leader Maintenance Training, CAE, to find out more JS: I’m more familiar with CAE from the pilot training perspective. Can you tell me more about why and how CAE supports business aviation maintenance training?

DB: In addition to pilots on the civil aviation side, we also train air traffic controllers, commercial aircraft cabin crew, and maintenance technicians. Our 2025 CAE Aviation Talent Forecast predicted that 416,000 new maintenance technicians will be required by the global aerospace sector by 2034, and of these, 69,000 will be needed in business aviation. We are committed to supporting this requirement through a comprehensive maintenance training portfolio that better prepares technicians for their roles and covers a full suite of OEM programs, including Bombardier, Dassault, Embraer, Gulfstream, and more.

We teach entry-level aircraft maintenance technician courses, as well as in-depth initial training courses on specific aircraft.

Courses range anywhere from three days to five-plus weeks for a complete aircraft tip-to-tail initial course. We also offer several professional development courses to help aircraft technicians improve their leadership skills.

48

H A W KE R A P A NEL

CHALLENGER 6 00 WI NDSHE I L D

Sp e c i al i zi n g in th e Man ufact ur i ng , Insta l l at i o n , Insp e ct i o n , a n d Repa i r o f A i r cr af t Wi ndshi e l d s & Wi ndow s 932 3 E . 34 TH S T N .

WICHI TA , K S 6 7 2 2 6 1-8 0 0 - 379 - 6 84 0 316 - 6 36- 9 20 0

BEECHJET 400 COCKPIT WIN D OW

A FT ERM A R KE T W I N D O W S

H A W KE R B PA NEL

L E A R JE T 31 / 31 A / 35 W I N D S H EI L D

FA A /C RS #YLI R 8 6 3 L SA LES@LEEA ERO SP A C E .C O M REPA I RS@ LEEA ERO S P A C E .C O M LEEA ERO SPA C E .C O M

PROFILE … CAE

technicians to practice diagnosing and resolving malfunctions in a safe, controlled environment before working on an aircraft. It also gives them more opportunity to practice, as physical aircraft are not always available for training.

We have integrated virtual reality (VR) technology into our maintenance technician training programs. This enables us to create detailed digital twins of aircraft, allowing trainees to virtually become familiar with aircraft systems, components, and procedures in a fully immersive, simulated environment.

This accelerates understanding, builds skills, and confidence in a safe setting. During a theoretical portion of a course, we can now bring an entire aircraft “into” the classroom and show levels of detail that, before VR, were very difficult to achieve. This high-value solution is transforming the aviation maintenance industry.

JS: CAE is very much a technology-led company; It’s clear from the state-of-the-art full-flight simulators (FFS), the company’s ability to incorporate gaminglevel displays into them, and the introduction of a new AppleVision Pro tool. How is the use of technology translating to maintenance training?

JS: How are customers responding to this new training methodology?

DB: Customers love being able to bring an aircraft into the classroom environment. The special orientation that VR allows makes objectives such as component locations, removal, and installation tasks much simpler to deliver.

Students enjoy being able to access parts of the aircraft that they usually couldn’t during routine maintenance. As business jets become increasingly advanced with integrated avionics and connectivity systems, technology-driven training ensures that maintenance teams are always prepared for evolving aircraft designs.

DB: Beyond the use of actual aircraft parts and hangarbased instruction, CAE is producing innovative ways to accelerate a student’s ramp-up time so they can become an effective technician sooner rather than later. Technology is at the core of CAE’s approach, and we are employing advanced simulation tools to support our customers. These allow

50

PRECISION SYSTEMS FOR PRECISION AIRCRAFT CAV Systems delivers proven ice protection solutions for Hawker and other leading business jets. Engineered for performance, safety and reliability.

CAV’s relationship with Hawker stretches back over 50 years, when we designed and manufactured TKS® panels for their first business jet... 20 years later, we became responsible for the entirety of the Hawker’s leading edge sections.

Today, we are the only company equipped to overhaul TKS® panels and Hawker leading edge sections to the original specifications. We combine proven history with innovation, keeping your aircraft flying safely, efficiently and reliably.

cav-systems.com customerservice@cav-systems.com sales@cav-systems.com

PROFILE … CAE

JS: You refer to the high number of maintenance technicians the industry will require. How do you work with OEMs to help them support their customers?

service bulletins, and new maintenance procedures. The result is a training framework that provides both legal compliance and real-world operational competence.

DB: We are exploring a number of options, and the relationship between CAE and Bombardier demonstrates a good example of how we’re thinking differently about training. We are collaborating on the development of a modular maintenance training program, which aims to optimise the time required to train Bombardier Service Centre maintenance technicians.

JS: What can we expect from CAE business aviation maintenance training in the future?

DB: CAE’s maintenance training continuously adapts to meet or exceed the needs of its customers. We are investing more in technology-based training, maintenance career development programs, and innovative training methodologies that accelerate training and make it more accessible in more places around the globe. With technology such as maintenance simulations and VR, CAE is continuing to push the boundaries of how technology can benefit learners in a way that appeals to the next generation. In addition, we can provide technician training at all of CAE’s business aviation training centres around the globe, as well as at the customer’s location on request, and even online.

There is a need for more trained personnel on the ground and in the field. A key challenge is that it currently takes a considerable amount of time to train new technicians, and even longer to train them across multiple aircraft platforms. The new modular solution developed for Bombardier reduces training time by consolidating courses for an entire aircraft family since they share many components and features. This is designed to speed up the acquisition of basic knowledge across the family of aircraft types and then become more tailored to each specific model.

For operators, this means ease of access and reliability, as well as trained maintenance personnel, which reduces the risk of unexpected aircraft-on-ground (AOG) situations, keeps flight schedules on track and ensures aircraft availability for demanding clients. Training with CAE also supports cost efficiency, as accurate troubleshooting and preventative maintenance minimise unnecessary part replacements and downtime.

JS: How does CAE ensure regulatory compliance and certification for its maintenance training?

DB: Maintenance training must meet strict aviation authority standards. This is why CAE aligns its programs with regulatory organisations, such as the FAA (Federal Aviation Administration) and EASA (European Union Aviation Safety Agency), as well as OEMs and partner MROs, to refine our programs continually.

For operators managing global fleets, this assures that personnel are qualified regardless of where the aircraft flies. CAE also works closely with OEMs to maintain type-specific authorisations.

For technicians, CAE training delivers career opportunities.

Earning OEM-authorised and regulator-approved qualifications enhances employability, mobility, and career progression. Ultimately, we are responsible for keeping business aviation moving safely and efficiently, and our maintenance training provides a foundation of technical excellence, regulatory assurance, and professional growth.|BAM

As regulations evolve, CAE updates its curricula, so technicians remain current with airworthiness directives,

52

Visit Us at BACE2025 in Booth 3445!

KVNY - Van Nuys, CA

PHNL - Honolulu, HI

818-988-8385

808-548-2948

Fuel Ground Handling Catering Hangar Storage Customs

Available LEARN MORE

PROFILE … KIPCREATING

Vision of the future Max Pardo, Founder and CEO of KiPcreating, on transforming visualisation and rendering across multiple industry sectors

Q

: Max, what got you started in the demanding field of 3D visualisation and rendering?

MP: I originally trained as an engineer and expected to spend my working life calculating complex systems. However, I discovered that my true passion was in computer graphics. That was something that had fascinated me since childhood, and my first computer.

What seemed at first like a detour became the foundation of KiPcreating, where I could merge creativity with problem-solving.

Over the past 20 years, that passion has grown into an awardwinning studio, trusted by leading names in aviation. Looking back, I feel fortunate to have followed my instincts, building

54

PROFILE … KIPCREATING

not only innovative visualisation tools but also long-term partnerships with clients I now call friends.”

Q: Tell us a bit about KiPcreating and the industries you work with, particularly business aviation.

Jets, Embraer, and Pilatus, along with operators such as NetJets. We also collaborate closely with completion centres, including Comlux, AMAC, and Greenpoint, as well as design leaders and suppliers like Yves Pickardt, Aurora Saboir, F/ List, and SkyStyle, just to mention a few.

MP: KiPcreating is an award-winning visualisation and software studio with deep roots in business aviation. We’ve been fortunate to work with leading names in the industry.

This includes OEMs like Bombardier, Boeing Business

What defines us is not just what we deliver, but how we partner. We don’t work for clients — we work with them, as collaborators. Whether it’s an OEM, a completion centre,

55

PROFILE … KIPCREATING

“ By leveraging real-time visualisation technology, we give our clients the ability to make informed decisions faster, saving valuable time and resources.”

or a design studio, we see ourselves as an extension of their creative and technical teams.

We know changes are inevitable, which is why our process is designed to be structured yet flexible. Our goal is not only to deliver a great image, movie, or configurator, but to make the customer journey enjoyable and stress-free.

To achieve this, I have assembled a multidisciplinary team of CGI artists, filmmakers, software developers, and designers.

Together, we’ve set new standards in photorealistic rendering, configurators, and immersive experiences for aviation.

To support this, we have developed proprietary tools that make the revision process both fun and effective. By leveraging real-time visualisation technology, we give our clients the ability to make informed decisions faster, saving valuable time and resources.

The result is a studio that combines technical precision, creative storytelling, and a passion for elevating client visions. That’s why we’ve been recognised with multiple International Yachts & Aviation Awards and why leading players trust us to help bring their aircraft and design concepts to life.

Most importantly, we are not distant AI agents; we work with our clients as an extension of their office. We are known for being fast, accurate, and above all, design-sensitive. Our team brings together industrial designers, architects, senior 3D artists, and software developers, so we approach each project from multiple angles. This combination of technical precision, design expertise, and human collaboration is what makes our process unique.

Q: Can you tell us a bit about how you work with customers to help them shape their vision of what they desire?

MP: At KiPcreating, collaboration is at the heart of everything we do. Every project begins with a kick-off meeting where we capture the client’s vision, and then we build a clear delivery plan together. This includes collecting references for mood boards, defining structured design revision stages, and scheduling real-time visualisation sessions where clients can see progress and provide feedback instantly.

Q: How does your approach differ from the way the industry uses current traditional 3D visualisations?

MP: Traditional 3D visualisation is still surprisingly slow and rigid. Many companies continue to work as we did 20

56

MOTOTOK TWIN 7500 NG: THE WORLD’S SMALLEST TUG WITH A 75-TON TOWING CAPACITY Engineered and Made in Germany with Passion.

Experience the power of electric drive, engineered to handle even the heaviest business jets with ease.

From BBJs to all Gulfstreams and Globals to smaller aircraft such as Dassault Falcons, Pilatus and Learjets, this state-of-the-art electric tug is suitable for all. With a capacity of up to 75 tons, it offers powerful performance in a very compact form. The fully automatic nose wheel pick-up and radio remote control streamline your ground handling. The robust hydraulic lifting platform ensures a firm and secure hold of the nose wheel at all times. Designed for maximum maneuverability and efficiency, each Mototok is agile, energy efficient and perfect for tight hangar spaces. This next generation tug is revolutionizing the way you move your fleet of aircraft on the ground.

Smart Tug Technology

FULLY ELECTRIC DRIVE

REMOTE AUTOMATIC CONTROLLED NOSEGEAR LOADING

HYDRAULIC NOSE GEAR PLATFORM

No Barriers to Entry

Get ready to elevate your operations!

NO DRIVER‘S LICENSE REQUIRED

Contact us.

ONLY 2 HOURS TRAINING

Mototok International GmbH Germany – Headquarter Mototok America LLC info@mototok.com · www.mototok.com ·

We‘ve got you covered! Sales and Service in Europe, North America, Asia and Australia.

Innovative remote controlled electric-drive tugs

PROFILE … KIPCREATING

years ago, building everything from scratch and relying on long render times. The process is time-consuming, and the biggest frustration for clients is that iterations take far too long. Every change adds days or even weeks, which disrupts the customer experience and risks losing momentum in critical design or sales discussions.

we still support traditional methods when necessary, we have introduced new tools to drastically reduce these timeframes and make the process more efficient for our clients.

Q: How is KiPcreating innovating to change the game?

MP: At KiPcreating, innovation has always been in our DNA. We built our first aircraft configurator back in 2007, running on an iPad with pre-rendered content, which was groundbreaking at the time. By 2014, we took a bold step forward, developing one of the first fully 3D real-time configurators that achieved photorealistic quality almost indistinguishable from traditional rendering. That vision has matured into what we now call Expressa, a platform that delivers real-time visualisation at a quality level that not only matches but often exceeds traditional renderings.

Balancing speed and quality has always been a challenge with traditional methods. Clients today face tighter deadlines and higher expectations than ever before, and the traditional workflow simply cannot keep pace. Delivering the level of realism they want within the time they need has become almost impossible without new approaches.

Revisions are particularly painful. Often, implementing changes takes longer than creating the initial visuals. Because visualisation is typically the last link in the production chain, we absorb the accumulated delays and have to deal with demanding last-minute changes. Traditional workflows make that extremely difficult.

The real breakthrough is that Expressa gamifies the customer experience with a user-friendly, intuitive interface.

It combines speed and photorealism in real time, enabling clients to create consistent content for design, marketing, and sales. Under the hood, our proprietary technology modifies gaming engines with extensive custom coding, allowing us to create exclusive interactive modules.

The impact on our industry clients is clear. Their customers expect immediate results and shorter timeframes, and traditional visualisation methods simply cannot keep up. The industry is shifting toward more interactive and agile solutions, and those who remain tied to old workflows are increasingly struggling to meet modern expectations. At KiPcreating, while

But perhaps the most important innovation is that Expressa is more than just a configurator; it is an ecosystem. We have built

58

PROFILE … KIPCREATING

“ The results speak for themselves. Expressa allows teams to work 80 to 95 times faster compared to traditional workflows.”

a growing aircraft digital twin database, material libraries, a material editor, and cloud-sharing functionality. This allows OEMs, designers, completion centres, and suppliers to coexist and collaborate effectively within a shared digital environment. And to make it widely accessible, we developed a subscription business model that keeps the platform affordable for teams of any size.

The results speak for themselves. Expressa allows teams to work 80 to 95 times faster compared to traditional workflows. That means fewer repetitive tasks, less burden on creative teams, and more focus on design innovation. Even professionals without a 3D background can use the tool confidently. The quality of the output is consistent, photorealistic, and in many cases indistinguishable from reality, while reducing content production costs by up to 95 percent.

to collaborate in real time, conducting spec sessions with customers that can compress what used to take four weeks of back-and-forth into a two-hour session.

That is how we see the future of aviation visualisation: faster, more collaborative, more effective and... in real-time.

Q. What can you tell us about how Expressa functions and how it addresses the drawbacks of traditional visualisations?

This is more than a tool; it is a shift in how the industry works.

Expressa allows OEMs, operators, designers, and suppliers

MP: Expressa was designed to eliminate the pain points of

IMAGINE You’re free to focus on what comes next.

You’re on your mission and you know: You’re on top of compliance, safety, ops…

All of this has become super easy and intuitive.

NGFT covers everything for a Biz-Jet or Rotary Wing Operation: Dispatch, Crew Management, Documents, Audit, Compliance, Safety, FlightLog, Duty Times, Flight Risk Assessment, WBT Courses for all crew ... of course AI is fully integrated.

Schedule a Meeting

www.ngft.com

59

contact@ngft.com

PROFILE … KIPCREATING

Q: Can you summarise the transformation that this brings to the industry?

traditional visualisation.

Where older workflows are slow and rigid, Expressa brings speed, flexibility, and consistency without ever compromising quality.

MP: Expressa is not just a configurator; it is transforming the way business aviation operates across sales, design, and collaboration.

In terms of speed, Expressa allows real-time navigation through any aircraft, with the ability to make changes on the fly while maintaining photorealistic realism.

Clients can instantly render still images or movies directly within the software, delivering in minutes what once took days or weeks.

From a sales perspective, it shortens customer decision time, increases closing rates, and eliminates much of the back-and-forth that used to slow down the process. Most importantly, it enhances the overall customer experience.

What once took weeks of approvals and revisions can now be done in a single interactive session, where customers walk away with a clear, photorealistic vision of their aircraft.

Flexibility is built into every module. With drag-and-drop materials, real-time swaps, and our Colour Scheme Creator, clients can test and visualise options immediately. Animated objects like tables, doors, or seats can be adjusted live, and interactive lighting modules allow day-to-night transitions or individual light control. At the end of a session, Expressa even generates a PDF report with mood boards and selected visuals, which can be shared seamlessly through cloud collaboration.

For design teams, the change is equally powerful. Expressa eliminates repetitive tasks, freeing up time for true creativity and innovation. If a customer has an internal team, the platform makes them more productive without disrupting existing workflows. If they do not, Expressa still empowers them with an intuitive interface, ready-to-use aircraft libraries, and extensive material options to design with confidence.

Consistency and quality are equally important. Our aircraft models are extremely precise, and our lighting is calibrated to guarantee a natural, realistic look in every output. All materials are based on Physically Based Rendering standards, which ensures fidelity in texture and colour. Clients can even import new materials and create custom libraries, always guided by our tutorials and best practices. This means the results are consistently photorealistic, even under the tightest deadlines.

Collaboration also reaches a new level. With cloud functionality, OEMs, suppliers, operators, and designers can all work within the same ecosystem. Materials and content can be shared across stakeholders, allowing suppliers to showcase their products and increasing opportunities for sales and partnerships.

Accessibility is another game-changer. We provide both offline and online configurators. The offline version is ideal for professional use, running on a laptop and producing the highest level of photorealism, while the online version is designed for exposure and initial customer interaction, often serving as a lead-generation tool. Many of our clients use both, starting with an online experience and then moving to a professional offline session for final decisions.

But perhaps the most striking impact is the client experience.

The first word we hear most often is simply, ‘Wow.’ Real-time navigation makes the design process engaging and enjoyable, transforming what was once a rigid review into an immersive journey. One client told us, ‘I am having so much fun working with the configurator that it doesn’t feel like work.’

That is exactly the outcome we want: to make life easier for our clients and help them close deals more effectively while enjoying the process.

Looking ahead, we believe Expressa will become the new standard for how aircraft interiors and exteriors are imagined, sold, and delivered. It is not just a visualisation tool but a professional ecosystem that will benefit the entire industry. And as we integrate the latest AI capabilities, combining our precise digital twins with the power of automation and new levels of interactivity, Expressa will continue to push the boundaries of what is possible in aviation design and sales. |BAM

The proof is in real-world results. One recognised OEM shared with us a customer review, where the buyer described it as the best purchasing experience they had ever had. What was once a four to five-week process was condensed into a two-hour meeting, thanks to Expressa. That is the difference this platform brings to the industry.”

60

Gosport, UK Raising the Standard of Excellence

“What makes our Gosport facility essential for in-region customers is our ability to deliver exactly what they need.

At StandardAero, our focus is on providing the highest levels of technical expertise and customer service so operators can fly with confidence. For me as the new VP/GM at Gosport, it’s about ensuring every detail – from routine maintenance to specialist technical support – is delivered with precision and care.”

Explore our Gosport Facility

Introducing

Richard Ward VP/GM UK Engines Business Unit StandardAero – Gosport PW307/308

TFE731

HTF7000

GTCP36 APU

PROFILE … AMAC AEROSPACE

“ From its beginnings with a wide-body hangar, AMAC has grown into one of the largest privately owned providers of VIP aviation services worldwide.”

Going the

extra mile Waleed Muhiddin, AMAC Aerospace’s Chief Marketing Officer, on what drives AMAC’s continued success

Q

: Let’s start with a brief history of AMAC and how it grew to its present scale.

WM: AMAC Aerospace, founded in 2007 in Basel, Switzerland, has established itself as an independent center of excellence for VIP completions, maintenance, and aircraft management. Built on Swiss precision, technical expertise and a strong customer-first philosophy, the company has become a benchmark in the business aviation sector.

From its beginnings with a wide-body hangar, AMAC has grown into one of the largest privately owned providers of VIP aviation services worldwide. Today, it operates multiple state-of-the-art facilities and offices in Basel,

62

PROFILE … AMAC AEROSPACE

Zurich, Istanbul, Bodrum, Lebanon and Riyadh, employing more than 1,500 highly skilled professionals.

in the UK. Together, these companies offer complementary expertise in completions, interiors, parts, documentation, maintenance, engineering, and support services, further reinforcing AMAC’s position as a global leader in VIP aviation.

AMAC Aerospace forms the foundation of the AMAC Group, which also includes JCB Aero and KES in France and Gamit

THE SPECIALISTS IN AVIATION INTERIOR PLATING

130+ brilliant finish selections Ability to custom match existing finishes ISO-driven 50-step decorative plating process Highest quality production, finish, and delivery

Contact us today! www.htf.net 713.666.0550

63

PROFILE … AMAC AEROSPACE

Q: What have been the outstanding features of the last two years for you as far as your core businesses of maintenance and large aircraft completions are concerned?

WM: It’s difficult to single out “outstanding” features, as every project we undertake is exceptional in its own right.

However, over the past two years, we have seen a clear increase in demand for LEO Satcom installations. Customers now expect the same seamless connectivity on their aircraft as they have at home, in the office, or on a yacht. This has required us to enhance our engineering and design processes, including the integration and streaming of Personal Electrical Devices systems to consistently meet these expectations.

Q: AMAC has a deep experience of designing and fitting interiors for large jets. How essential is it for designers to have an appreciation of how the design has to fit in with future maintenance and access requirements, and how much compromising is required?

Q: How is the completions sector holding up as we head for the 4th Quarter of 2025?

WM: For AMAC Aerospace, the fourth quarter of 2025 is shaping up to be a particularly busy period. The company is actively finalizing both narrow-body and wide-body completions while simultaneously initiating aesthetic design and engineering for upcoming projects. At the same time, preparation work on upcoming narrow-body and wide-body aircraft is well underway, ensuring a smooth workflow and readiness for the years ahead.

WM: At AMAC, we always strive to find the right balance between design and maintainability. We take special care with ergonomics and accessibility, ensuring that our cabin interiors are not only beautiful and bespoke but also practical and easy to operate. Our goal is to create spaces that function flawlessly in daily life while allowing passengers to experience the cabin as a true piece of design.

64

PROFILE … AMAC AEROSPACE

“ Fully embedded within the completion center, our designers have direct access to engineering subject-matter experts, certification specialists, and other key teams (from the very first contact with the customer through product development and into service).”

What sets us apart is our integrated Design Studio. It is composed not only of talented colleagues but also of professionals with strong technical engineering expertise. Fully embedded within the completion center, our designers have direct access to engineering subject-matter experts, certification specialists, and other key teams (from the very first contact with the customer through product development and into service).

Q: What are the main challenges in keeping such a highly skilled technical workforce operating at a high level continuously, as far as both maintenance and completions are concerned?

We do not compromise between aesthetics and maintainability; instead, we provide solutions that satisfy both. This close collaboration ensures that every interior we create is visually stunning, technically robust, and fully aligned with operational and maintenance requirements.

WM: We place great emphasis on continuous training, working conditions and maintaining a safe environment and

CUSTOM PARTNER SOLUTIONS

If we were in a beauty race... We’d finish first,

Every time.

Learn more about all the finishes we offer:

S I G N AT U R E P L AT I N G . C O M

65

2 1 0 . 6 5 8 . 5 5 9 9

PROFILE … AMAC AEROSPACE

Q: AMAC has expanded significantly in recent years, is the expansion going to continue?

we strive to create a culture where professionals can perform at their best, knowing they have a listening ear from both peers and management. Our leadership follows an opendoor policy, ensuring that any issue can be discussed and addressed promptly.

WM: AMAC’s expansion is driven primarily by our customers’ requests and market needs. This a pragmatic approach that ensures we grow where it truly matters.

Based on the strong demand we see across completions, maintenance, and VIP services, we can anticipate continuing to grow in the coming years while maintaining our focus on quality and tailored solutions.

Of course, passion and dedication remain key. Our teams consistently go the extra mile and take ownership of every aircraft as if it were their own, ensuring exceptional quality in both maintenance and completions. By combining strong training, supportive leadership, safety and great working conditions, we foster an environment where highly skilled professionals can operate at the highest level consistently.

Physical growth is at the discretion or our Executive management board. We assess every company that is presented to us and we weigh up the business choices to ensure that there is a natural fit. As written in a previous answer, as a group of companies, we do not mimic the same services but fill gaps in what we have experienced and allow a form of autonomy to take shape when any one of our companies is looking to diversify products and/or services. It is essential to foresee what is being presented, for us to take the time to analyze it and decide thereafter.

Q: Do you see the business jet market tightening by the end of 2025 or early 2026? How optimistic are you that current levels of business will continue?

WM: From our perspective, we do not foresee any market tightening in the near term. In fact, we are actively encouraging our customers to engage with us via Letters of Intent for completions, even when aircraft deliveries are one or two years away or even further out. This is not because we are anticipating demand but because we already have strong demand. For maintenance, providing work packages well in advance allows us to plan ahead and secure the necessary services. We strongly advise our customers to provide their maintenance packages early to avoid the risk of not securing a slot.

For personnel development, we are continuously investing into our workforce to ensure that they grow as much as we can serve our clientele. To have an educated workforce who are dedicated and motivated only stems from leadership that is passionate about wanting to see colleagues grow and become more knowledgeable. To this degree, we are satisfied with how our outlook and our colleagues enjoy coming to work every day. |BAM

66

DEAUVILLE PARIS-LE BOURGET

CAEN

QUIMPER

CHÂTEAUDUN

SAINT-ÉTIENNE

A CORUNA RODEZ

SANTIAGO DE COMPOSTELA

AVIGNON

BIARRITZ PORTO

BÉZIERS &$3 '·$*'( MADRID

AZORES

CASCAIS LISBON BEJA

TRIESTE

ALBENGA

SAINT-TROPEZ

GIRONA BARCELONA

VALENCIA

PALMA DE MALLORCA

FARO

MALAGA MADEIRA

CUNEO

CANNES

THESSALONIKI

IBIZA CORFU AKTION ATHENS MYKONOS PAROS SANTORINI CHANIA

HERAKLION

LARNACA PAPHOS

PROFILE … AERO SPECIALTIES

Innovative Brad Streeter, CEO, AERO Specialties, on how the company has transformed into a global force : Brad, can you take us through the early years of the company?

A: AERO Specialties was founded in 1987 in Boise, Idaho, with a singular focus: design and deliver smarter, tougher ground support equipment (GSE) that aviation professionals can count on—every single day. Nearly four decades later, we’ve grown into a global force in the GSE industry, serving commercial airlines, military fleets, and business aviation operations in more than 100 countries.

We’re not just manufacturers—we’re problem-solvers.

From tow tractors to air start units, from nitrogen carts to hydraulic test stands, we engineer solutions that anticipate operator needs, accelerate workflows, and survive the most challenging ramp conditions on Earth.

68

PROFILE … AERO SPECIALTIES

AERO’s executive team brings decades of hands-on aviation, logistics, and Defense sector experience to the table. Under our leadership, the company has scaled dramatically, while staying fiercely customer-focused.

What’s consistent across this base is that our customers take care of their equipment. They expect longevity. That’s why our catalogue extends beyond core GSE into ramp and hangar enhancement tools—to continue supporting clients whose original purchases may still be in service a decade later.

We don’t chase trends. We lead quietly—by delivering equipment that shows up, stands up, and outperforms.

Whether it’s a lav cart in Luxembourg, a nitrogen unit in Nevada, or a hybrid tug in Dubai—our customers rely on us not just for products, but for continuity, capability, and support. That’s the role we play. And it’s why they come back.

Q: Can you tell us a bit about the customer base?

A: AERO Specialties serves an extraordinarily wide spectrum of aviation clients—ranging from single-aircraft operators to multinational OEMs, from frontline military bases to global FBO chains.

Q: What makes AERO different from other GSE manufacturers?

A: We build for reality—not for a spec sheet. That means designing equipment that withstands 120°F heat,- 30°F temperatures, or corrosive environments with tight turn times and high consequences. But beyond that, we support everything we sell. We don’t hand off customer service to third parties. Our technicians, trainers, and engineers work side by side with the people who actually use our equipment.

At one end, we support business aviation operators with tailored GSE solutions that emphasise aesthetics, compactness, and reliability. That includes major players like Signature Aviation, Atlantic Aviation, and JetEx, where we’ve become a trusted supplier for everything from tow tractors to potable water carts.

On the other end of the spectrum, we hold single-source contracts with the U.S. Department of Defense, the Eurofighter program, and various life support and medevac fleets. These clients operate in environments where equipment performance isn’t a convenience—it’s a mission-critical demand.

That full-cycle accountability—from design to support— is rare in this industry. AERO doesn’t just make ground support equipment. We build relationships that last longer than some fleets.

Q: What is your geographic footprint now?

Commercial and regional airlines represent another significant segment. MRO facilities, charter carriers, and airport authorities turn to us for compliant, durable, and scalable equipment—especially in high-throughput environments where downtime is unacceptable.

A: While our roots are in North America (and the U.S. remains our largest market), AERO Specialties has become a truly international player: • France now anchors our EU expansion.

Geographically, our footprint spans over 100 countries. While 60% of our business is still U.S.-based, we’re expanding rapidly in Europe, the Middle East, South America, and Southeast Asia through regional offices and strategic partners.

• Dubai handles the fast-growing Middle East aviation sector—especially high-volume needs for air conditioning carts.

70

PROFILE … AERO SPECIALTIES

Q: How does AERO adapt equipment to different regional environments?

• Asia, Africa, Australia, and South America are growing footprints with strategic partnerships and targeted supply chains.

A: This is something we take seriously. Cooling carts in Dubai are fundamentally different from heater units in Chicago or de-icers in Norway. We customise engine packages, insulation, corrosion resistance, and even tire selection based on regional climate and terrain. It’s not one-size-fits-all.

Our products are engineered for regional realities—from icy winter de-icers in Europe, to desert-ready cool carts in Doha, to tropical-ready ground power units in São Paulo. Wherever aviation goes, we’re ready to support it.

One Source. Unlimited Offerings.

Aircraft Parts Distribution provides one of the most comprehensive offerings of services and parts in the industry today. From an extensive inventory of New Parts and Rotables for Bombardier Global, Challenger, Learjet, Hawker, Citation, Beechcraft and Gulfstream models – to industry-leading Repair Management AIRCRAFT PARTS DISTRIBUTION Services, Aircraft Parts Distribution is the single-source for your individual aircraft parts needs.

COME SEE US AT NBAA 2025 | BOOTH #725

71

316-375-5780 | aircraftparts.net

PROFILE … AERO SPECIALTIES

Our international success comes from respecting those differences—and engineering for them, while providing local, superior support after the sale.

• Custom GSE & Maintenance Access: From de-icing support to custom tow vehicles, we collaborate with OEMs, MROs, and Defense clients to create purposebuilt systems for real-world complexity.

Q: What does the current AERO product range look like?

A: We offer a full-spectrum GSE catalogue built for the realities of modern aviation—where reliability, sustainability, and serviceability are non-negotiable.

When customers say they want one partner for everything on the ramp, we answer.

Q: How does AERO approach product development? Is it customer-driven, technology-driven, or both?

• Aircraft Tugs (Towbarless & Conventional): Electric and diesel-powered tugs for aircraft from light jets to narrow-body commercial airliners.

A: It’s both, but with a clear priority: solve real problems. We don’t invent tech for tech’s sake. The HPU-4, for example, came directly from customer feedback—techs who needed a smarter, easier, AMM-compliant hydraulic test stand that could survive the ramp and not slow them down. We built it for them.

• Ground Power Units (GPUs): Diesel, electric, and hybrid models—28.5V DC and 400Hz AC—designed for both ramp and hangar environments. Our hybrid units support both power delivery and engine starts. Our JetGo line blends torque and efficiency in a compact footprint.

We run prototypes in live environments, listen to field teams, and iterate quickly. That’s where the innovation happens— not in a lab, but on the ramp.

• Oxygen & Nitrogen Carts: High-pressure O2 and N2 servicing carts deployed globally—under single-source contracts with the U.S. Department of Defense, Eurofighter Program, and medevac services like LifeFlight.

Q: How does AERO manage quality control across such a broad catalogue?

A: We apply the same internal standards across everything we touch—whether it’s made in Boise or sourced through our ALVEST partners. That includes ISO-9001 and ISO14001 certification, multi-point inspection protocols, and pre-delivery testing. Even our sourced units undergo AERO validation before they reach a customer.

• Lavatory & Potable Water Units: IATA/ICAOcompliant, available in hand-pulled, towable, and motorised variants. We’re known for smart modularity, service simplicity, and rugged builds.

Our reputation is built on consistency. If it’s in our catalogue, it meets our bar.

• Hydraulic Test Stands (including the new HPU-4): AMM-compliant support for B737-NG/MAX, B757, B777, and B767 aircraft with touchscreen interfaces, contamination monitoring, and digital data logging— all in a portable, field-resilient form.

72

PROFILE … AERO SPECIALTIES

Q: You’ve mentioned ESG and sustainability—how does AERO integrate that into operations?

regulatory frameworks or sustainability mandates is moving in this direction. But we also see interest from customers who simply want quieter operations, better long-term cost control, or fleet standardisation.The market is catching up to where the technology already is. And we’re ready for that shift.

A: Sustainability isn’t an afterthought at AERO. It’s in the bolts, the software, and the business model. As part of the ALVEST Group, we align closely with the “Leaner & Greener” mandate, focusing on low-emissions equipment, circular design principles, and energy efficiency from factory floor to flight line.

Q: The HPU-4 is drawing attention in the MRO space.

What makes it special?

A: The HPU-4 is the product of hundreds of hours in the field with technicians, asking what actually works—and what doesn’t. It’s not a spec sheet upgrade. It’s a ground-up reimagining of hydraulic service support.

• All-electric and hybrid GSE is now available across most product lines.

• ISO-9001 & 14001 certifications ensure rigour in both quality and environmental management.

• Touchscreen diagnostics replace clunky gauges, and user error • Plug-and-play hangar integration speeds deployment.

• We actively support Solar Impulse and similar initiatives seeking GSE with measurable climate and cost ROI.

• Boeing approvals for B737-NG/MAX, B757, B777, and B767 (more coming soon) platforms enable instant fleet utility.

And perhaps most importantly: our gear lasts. Durability is sustainability—and our gear stays in the field far longer than most OEMs dare to promise.

• Tool-less maintenance, dual-fan oil cooling, and onboard presets reduce downtime and error margins.

Q: Do you see demand for electric and hybrid GSE accelerating? Where?

Technicians describe it as a “finally” moment—GSE that aligns with how they actually work. And that’s the core of what we do: engineer for people, not just platforms.

A: Absolutely—especially in the EU, parts of the U.S., and increasingly in the Gulf region. Anywhere with strong

When you choose Aeroaxio, you’re choosing unmatched reliability, expertise, and transparency. Here’s what makes us your ideal partner: • • • •

Client-Centric Approach Honesty & Transparency Rock-Solid Reliability Top-Notch Quality Assurance

Ser vices: • • • •

Technical Aircraft Management Part Procurement and Logistics Department Annexation Document and Asset inspections TEL: +35621314942 , +35699223792 | EMAIL: office@aeroaxio.com | aeroaxio.com

73

PROFILE … AERO SPECIALTIES

Q: Let’s talk about customer service. What makes AERO different?

it doesn’t matter where a bolt was turned. What matters is that the equipment works when it’s needed. And ours does.

A: Most OEMs sell and ship. We stay. From the beginning, we embedded service into our business—technically, operationally, and culturally. It’s why we have one of the highest repeat client rates in the GSE space.

Q: What’s one thing about AERO people often underestimate?

A: How much of the industry runs on our equipment— quietly. You might not see our name splashed across a terminal billboard, but behind the scenes, our carts, tugs, and support units are everywhere. We support presidential aircraft, military operations, and some of the biggest business aviation hubs in the world.

• Real humans, honest answers – No ticket queues, no outsourced call centres. Customers speak to the techs who build, service, and engineer our gear.

• Parts, training, and diagnostics—worldwide – With distributor and support networks in over 100 countries, downtime is kept minimal, and help is local.

People often think of us as a GSE manufacturer. And we are.

But we’re also a problem-solving partner for some of the most complex ground operations on the planet.

• Integrated field empathy – Many AERO staff are exaviation, military, or logistics professionals. They’ve lived the ramp—and it shows in our access designs, training protocols, and documentation.

Q: What’s changing most in the GSE market right now?

A: Three significant shifts: electrification, digitisation, and procurement strategy. Customers want cleaner gear, smarter interfaces, and faster delivery—with fewer vendors. That means integrated platforms, data-ready diagnostics, and global support. It’s no longer enough to just “sell a GPU.” You need to offer insight, ROI, and ongoing uptime support.Those who can’t adapt will fall behind. We’ve spent years preparing for this.

• Digital onboarding and MRO alignment – Our HPU-4 and other digital-integrated platforms come with direct calibration, remote support, and tech stack compatibility.

We don’t treat customer service as a department. It’s a competitive weapon. And it’s why some of the largest aviation brands on Earth trust us as their frontline GSE partner.

Q: What’s the coolest thing—or client—you’ve worked on at AERO? A: We’ve done a lot of great work over the years—but a few stand out. Working with Boom Supersonic as they push boundaries on sustainable supersonic flight has been exciting. We’ve also built custom units for top-tier OEMs, international militaries, and more than a few “no-fail” environments where performance has to be perfect, every time. But honestly, the coolest thing? Hearing from a line tech or hangar chief six years after a sale who says, “That cart is still running like the day we bought it.” That’s the win.

Q: How much of what you sell is manufactured in-house versus sourced from other suppliers?

A: About 40% of our product catalogue is designed, engineered, and manufactured in-house by AERO Specialties in the United States. That includes many of our flagship systems—tugs, GPUs, lav and potable water carts, oxygen and nitrogen servicing units, and hydraulic test stands—all built to meet the demanding requirements of AMM compliance, Defence contracting, and global ramp conditions.

Q: What does the future hold?

A: We’re building toward a world where ramp operations are cleaner, faster, and frictionless—without compromise.

The remaining 60% comes from a mix of trusted OEM partners and companies within the ALVEST Group, allowing us to deliver a complete, vertically integrated GSE solution.

Everything we distribute—whether built in Boise or sourced internationally—is vetted, supported, and serviced by our internal technical team. It may not have come from our floor, but if it bears our name, it bears our accountability.

• Our expansion into South America and India mirrors the next wave of aviation growth.

• We’re investing heavily in AI-driven diagnostics, datalogging platforms, and smart GSE telemetry.

We’ve always believed in being a true one-stop shop. For customers, that means fewer vendors, shorter lead times, and one standard of quality across the board—from ground power to tow tractors to hydration carts. No guesswork. No fingerpointing. Just gear that works. And while we’re constantly exploring new capabilities and categories, we scale with purpose.

If we can build it best, we do. If someone else builds it better, we integrate it—and back it with the same commitment. Ultimately,

• And we’re staying true to what built the brand: engineerfirst manufacturing, human-first service, and product lines that don’t just fill catalogue pages—but shape flight lines.

When a technician says, “This works”—that’s success.

And when a client calls us again three years later without hesitation—that’s what we strive for and live for. |BAM

74

The Jet Centre closest to the

90 seconds Arrival/Departure Experience

of London

30 minutes to Central London

Exclusive dedicated VIP Lounge

First FBO in the UK equipped with next-gen CT X-ray and full-body scanner.

Long-term aircraft parking available for all aircraft types.

Newly approved aircraft : Gulfstream 650, G500, G600 & Bombardier Global 7500.

For enquiries contact jetcentre@londoncityairport.com | +44 (0) 207 646 0400 privatejetcentre.londoncityairport.com

75

PROFILE … CELTIC AIR SERVICES

Ranking highly Dave Morgan, President, on how the opening of two world-class golf courses on Cape Breton Island, Nova Scotia, gave rise to Celtic Air Services

Background

for me. I saw it as a great opportunity to grow the airport and to bring some control and quality to the burgeoning growth that they were experiencing following the opening of the courses.

In 2018, two world-class golf courses opened at the Cabot Cape Breton resort. The Cabot Cliffs course is ranked number 11 in the world by Golf Digest, which also rates Cabot Links, number 35 in the world. Both courses offer dramatic views of the ocean. The resort also offers a par-3 course called The Nest, along with luxury accommodations and multiple restaurants.

At the time, I was a director with a large airline in Canada.

In my early conversations with the Airport Group, what we talked about wasn’t the creation of an FBO. They were looking for someone to start a helicopter company.

What I was able to focus on and get them to follow, was a professional approach to dealing with the complete transformation in the airport’s business. Before the course opening, you could have left a small Cessna in the middle of the runway, and nothing would have hit it. The traffic was really thin. Then the courses opened, and that was a huge economic driver. Golfers were coming from all over the world – and still are, in increasing numbers.

Q: Dave, can you tell us about the opportunities and challenges that came out of the worldwide interest that the new golf courses created in terms of the need for FBO services on Cape Breton?

DM: Our story starts with the boom in private aircraft travelling to the Allan J. MacEachen Airport on Cape Breton as a direct result of the Cabot Cliffs Golf course opening. This was interesting

76

PROFILE … CELTIC AIR SERVICES

“ The traffic was really thin. Then the courses opened, and that was a huge economic driver.

Golfers were coming from all over the world – and still are, in increasing numbers.”

This was a huge change, like night and day. Once the traffic really hit us, you could have thrown a tennis ball up and had it bounce off an incoming NetJets flight. It was frantic.

to handle a multitude of tasks. Now we have everything a professional FBO needs.

Q: This is your ninth season, right?

Q: What were the main challenges in getting the FBO set up and putting in place a truly professional approach to managing incoming and outgoing business jets?

DM: We opened the FBO in July of 2017. That first year, I wondered if we’d even be here still when Spring arrived.

Now we are known across North America and by some large European operators as well, and it has been a phenomenal experience to be a part of.

DM: There were so many challenges. Just getting the lawn mowed was a challenge. Building up the equipment and inventory that you need as a functioning FBO was a challenge. The money wasn’t there in the early days for brand-new equipment. We were buying pre-owned. Getting fuel storage in place to hold enough Jet-A was a challenge in itself.

Q: Is this mainly a Spring and Summer season thing for the FBO? DM: It is true that we don’t get a lot of traffic in the winter.

We start to get busy about the second week in May, and it goes quiet around the first week of October. Then we go to NBAA to fly the flag, as it were, and to build relationships for the coming year.

This year, for example, we got our first brand-new ground power units. That first year, we had a Ford pick-up truck

77

PROFILE … CELTIC AIR SERVICES

us to maintain, given that central budgets, which govern the Border Service Agency, are always being tightened. Our partnership with the Agency is very important for us.

Q: The Airport has set hours when it is open, but the FBO provides a 24/7 service. How does that work?

DM: We are available for services on a 24/7 basis, where we are on call out should that be necessary. What this means is that we have people here at the FBO from 8 am to 6 pm every day of the week, with their hours often extending until 8 pm.

We charge a slightly increased fee for call-outs outside of the airport’s normal hours. However, that doesn’t put people off. We have late night calls happening virtually every day of the week!

Q: You began with four staff. How many do you have now?

DM: We now have 35 staff. It is going well, and every year things get busier. We have a lot going on across the island, in particular, and Nova Scotia in general, in terms of industrial activity. There is a pulp mill and a gold mine nearby, and lots of government and private businesses.

For an island, we now consider ourselves a big part of the equation as far as business jet flights to and from Nova Scotia are concerned. We market regularly to the brokers and operators with big client lists. We’re getting the word out and are constantly looking to expand the business.

However, things do continue in the winter, albeit at a much lower pace. We have business jets flying in for meetings; we have some military flights, as well as traffic and coastguard flights. We do quite a bit of work with medevac carriers as well.

The roads in Nova Scotia can be treacherous in winter, so there are emergency evac flights going on that we deal with.

It has been a huge growth curve. When we started, the arrival of a small Learjet would be a big deal on the day. Today, if we have four Globals arriving on the same day, it’s a good day but not an unusual one. |BAM

Q: You have border control right there in the FBO, right?

DM: Yes, we do, and that is something of a challenge for

78

RESERVE YOUR RIDE TODAY US: +1 914 738 1200 UK: +44 20 3286 3212 Toll-free: +1 800 828 8283 reservations@limousinesworldwide.com dispatch@limousinesworldwide.com We are a FKDX΍ HXUHG WUDQVSRUWDWLRQ PDQDJHPHQW VROXWLRQ providing services in FLWLHV JOREDOO\.

Whether you need ground transport for a EXVLQHVV MHW SDVVHQJHU, quiet travel between business meetings, or just want to show up in style to your night on the town, we have you covered We provide XS WR GDWH QRWLȴ FDWLRQV for each reservation and our customer service team is friendly and knowledgeable.

WWW.LIMOUSINESWORLDWIDE.COM

79

BIZAV MAINTENANCE CONFERENCE 2025

BizAv Maintenance Conference 2025:

Breaking New Ground

he inaugural BizAv Maintenance Conference 2025 marked a milestone for the business aviation community, bringing together aircraft manufacturers, leading maintenance organizations, and major private fleet operators for the first time in a dedicated forum focused exclusively on business aviation maintenance.

Feedback from attendees emphasized both the relevance of the topics and the quality of the contributions from speakers and moderators. Beyond the sessions, the event’s networking opportunities were particularly well received, with many delegates noting the benefit of connecting directly with peers, suppliers, and OEM representatives in a focused and collaborative environment.

Hosted at the Hilton Heathrow Terminal Five, the event featured participation from Textron Aviation, Bombardier, Embraer, and Airbus Corporate Jets, alongside a wide range of service providers and operators. This strong turnout highlighted the industry’s appetite for a platform that addresses the unique challenges and opportunities within business aviation maintenance.

The day concluded with a reception that carried the conversations forward in an informal setting, closing what was widely regarded as a successful first edition of the conference.

T

BizAv Media would like to extend its thanks to the sponsors whose support made the event possible, to the speakers and moderators who shared their expertise, and to the delegates who engaged fully throughout the day. Their combined efforts created a program that was both thoughtprovoking and practical, setting a strong foundation for future editions.

The agenda was built around a series of forward-looking discussions. Panels explored the future of maintenance, workforce training, connectivity, sustainability, and the growing role of digital technologies such as IoT and AI. Dedicated sessions also gave manufacturers the opportunity to outline their latest strategies and support programs, while operators and service providers shared practical insights from the field. The combination of technical depth and strategic perspective provided delegates with valuable takeaways to apply within their own organizations.

By establishing this new platform for dialogue and collaboration, the BizAv Maintenance Conference 2025 has opened an important chapter for the business aviation maintenance community—one that will continue to shape the sector in the years ahead.

80

BIZAV MAINTENANCE CONFERENCE 2025

Co-Hosts

Event Partners

Event Sponsors

81

BIZAV MAINTENANCE CONFERENCE 2025

82

BIZAV MAINTENANCE CONFERENCE 2025

If you’re ready to connect, celebrate, and be part of the conversations that shape our industry, you won’t want to miss what’s next. Join us. |BAM

For a complete gallery of photos from this conference visit:

www.bizavltd.com/bizav-conferences/bmc25-gallery

83

PROFILE … DUNCAN AVIATION

World-class support delivered locally Mike Minchow, President of Duncan Aviation, talks to Anthony Harrington about the 70-year-old family company’s successes and goals AH: Mike, can you clarify the distinction between your three main hubs and the 28 satellite operations, and how that plays out in practice?

to ensure we are there locally to support our customers before, during and after their projects at our three main facilities.

MM: Our three main MROs offer a full complement of services, covering:

Now, about our Rapid Response hubs. These are not facilities but are teams stationed in areas throughout the US to perform AOG and scheduled aircraft and engine work as needed worldwide.

• Paint One last thing I wanted to mention is, even though we have been operating under one FAA-approved RSGOM for the past 25+ years, at the end of 2023, we received the first-ever FAA-issued Repair Station certificate that united all of our facilities and Satellites under a single Repair Station number (JGVR194F).

• Interior • Avionics Install • Airframe

This Single Repair Station Certificate provides value not only to Duncan Aviation but also to our customers. Probably the greatest benefit to our customers is that with one group overseeing and supporting all of the Duncan Aviation locations, we are able to ensure that the service and support provided across all of our locations is consistent from the work we do to our final Return to Service sign-offs.

• Engine • Accessory and Component Repair, etc.

• Engineering & Certification • Aircraft Sales & Acquisition

AH: What’s happening on the AI front? Is it becoming more important?

• Parts

MM: The last time we spoke, I touched on the challenges associated with coordinating multi-shop events and how we are using AI to optimise schedules and downtime for the customer.

• Line Services For the most part, we want to offer the same services at all three of our main MROs to give our customers more options and greater flexibility when scheduling in for work.

Our AI team continues to work in parallel with our Continuous Improvement Program and Innovation teams to discover more ways to leverage AI. We are constantly looking for ways AI can further augment and complement the work we are doing today. As we continue to learn more and more about AI, one of the things we have realised is that in order to get the enhanced value out of the AI tools, we need to train and instruct our leaders on how to best write prompts.

Through asking the right questions, we can get the most accurate and relevant information needed.

Of course, there are some exceptions that become costprohibitive to replicate at all three facilities. An example would be our engine business. While we offer Engine Line Maintenance Services in Lincoln, Battle Creek, and Provo, our main overhaul activities and our test cell are located at our Lincoln, NE, facility.

In contrast, the Satellites started as avionics repair and line services. Then over the years, we have added installation capabilities and expertise. Recently, we have invested in further diversifying the services we offer through our Satellite Shops and now offer limited airframe support, tool calibration, and battery services (battery replacements and restoration, deep cycle and capacity checks, new battery sales, etc.) Our vision is

We are really on the cusp of finding out what AI will mean for our business and for business aviation as a whole. There are the more straightforward things like making sure our customer service experience is more streamlined, but we are also exploring how AI can help us better manage labour

84

PROFILE … DUNCAN AVIATION

“ Now, about our Rapid Response hubs.

These are not facilities but are teams stationed in areas throughout the US to perform AOG and scheduled aircraft and engine work as needed worldwide.”

85

PROFILE … DUNCAN AVIATION

Gul f stream G 6 5 0

resources and inventory, as well as complement our existing leadership and technical training programs.

aircraft into an ultra-customised masterpiece, featuring specific colours, fully customised seats, rich Kosipo veneer, and a meticulously handcrafted carpet.

In the end, we have a tremendous amount of data that we have been collecting over the last roughly 70 years of being in business. We will continue to lean in on how to best leverage AI to better serve and support our customers while also ensuring we maintain a high level of security and control over that data.

The cabin seating was a vital part of the design and was inspired by the owner’s personal briefcase.

The owner has a briefcase that he absolutely loves. He wanted the colour and grain of the seats to be an exact match, so we sent the physical briefcase to our leather vendor to ensure we nailed that colour.

AH: What can you tell us about a specific recent jet refurbishment or green aircraft project?

MM: We recently had a G650 customer whose vision for the re-imagining of his aircraft’s interior focused on some very specific design preferences. Our senior lead designer, Molly Pfeiffer, used her years of experience to turn his preferences into a masterfully designed interior.

There’s a calming and inviting aspect to the seats. They’re a nice shade of orange that is not too bright, but still makes a statement.

The colour isn’t a tangerine orange, not a burnt orange, and not that iconic deep orange associated with high fashion. In fact, there’s not a word to describe it. It’s a truly custom colour that was made specifically to meet the client’s tastes.

This was just one of many large-cabin Gulfstream interior refurbishments that we have completed across our network of maintenance, repair and overhaul facilities. For this project, skilled artisans at our Provo, Utah, facility transformed the

Another defining feature of the project was a highly custom Kosipo, an African Mahogany veneer, that was applied

86

PROFILE … DUNCAN AVIATION

“ The market continues to be strong. We continue to encourage operators to involve MROs early to ensure they can have their choice in scheduling.”

horizontally. This horizontal application is not the typical installation method for veneer, posing a challenge for the team. The design had to seamlessly blend the veneer’s dynamic grain pattern with the rest of the cabin.

The final result was a triumph. The owner’s representative declared herself speechless when she saw the interior for the first time.

AH: What do you think of the current state of the market and where things are going?

Despite the challenges, the decision to apply the veneer horizontally enhanced the interior’s visual flow. Then there was the carpet. This was everything to the customer. It created the cabin’s focal point. Similar to the seat colour, the owner had a very specific colour for the carpet—a rich, chocolate brown. Finalising the carpet design proved to be the most challenging part of the process. After much back and forth, Molly presented an option that simulated a flowing river down the centre of the cabin.

MM: The market continues to be strong. We continue to encourage operators to involve MROs early to ensure they can have their choice in scheduling. Yet we wouldn’t want anyone to assume that we are full. There are pockets in the schedule that can provide some more near-term work, so it’s best to simply communicate and call.

Demand for connectivity is strong, as are airframe/engine maintenance requirements. Interior refurbishment has seen a little softening, but again, it is more with pockets of availability between strong bookings. And pre-purchase evaluations are strong.

The team chose Scott Group Studio in Grand Rapids, Michigan, to make the carpet. The result is a handmade custom carpet that moves the eye through the cabin. The completed cabin featured many other unique focus points, including a custom reading light bezel that would demand FAA certification since no G650 had ever had one.

As we bring the new Lincoln paint hangar and expanded engine facility online in 2026, we remain optimistic about business into the foreseeable future.

87

PROFILE … DUNCAN AVIATION

Engi ne Faci lit y E x p a n s i o n Re n d e r

New Lincoln Paint Facilit y Render “ As we bring the new Lincoln paint hangar and expanded engine facility online in 2026, we remain optimistic about business into the foreseeable future.”

To recognise the importance of the arts to the Duncan family, we will also celebrate with some collaborative art projects that will bring together the efforts of team members, key industry partners and customers of all talent levels. These art projects will celebrate our history and be on display at NBAA-BACE in 2026.

Of course, our most important successes always involve our dedicated team members and ensuring we stay focused on programs that support the onboarding of new Team Members but also recognise and celebrate the Team Members who have been an integral part in building and strengthening our brand over the past 70 years.

AH: What can you tell us about your future goals and plans?

MM: It has to be said that 70 years and four generations of ownership are an amazing feat for a family-owned company.

We plan to celebrate this milestone all year in 2026 with our family, team members, customers, partners, communities, and the business aviation industry. We will announce our anniversary activities at the beginning of 2026, but it will be fun and memorable.

Duncan Aviation offers an on-site Apprentice Program that prepares team members to take their Airframe & Powerplant exams as a way to combat the industry workforce shortage.

There are nearly 600 lifetime members of the Duncan Aviation Silver Wings Club. To be a part of the club, team members must have spent 25 years with the company. And roughly 25% of our team members currently serve our country in the Armed Services or are Veterans.

To celebrate our growth and expansion, we will be opening our new DOF, which will support Pratt & Whitney Canada engine operations. That expansion is currently under construction in Lincoln and will be fully operational in 2026. This dedicated facility will focus on the overhaul and maintenance of both PW300 and PW500 series engines. We will also complete a new 32,500-square-foot paint facility in Lincoln in 2026 that will provide more flexibility to paint customers. (Duncan Aviation completes 250 paint projects enterprise-wide every year, with roughly 105 of them in Lincoln.) It will be fun to celebrate these openings in conjunction with our anniversary year.

The culture that we have built here is felt every day by our team members when they come to work, by our customers when they bring their aircraft to us, and by our partners when they visit our facilities and work with our team. We are mindful of how our daily decisions affect the lives of those who have directly given Duncan Aviation the success we have seen. We continue to strive to make Duncan Aviation the best it can possibly be! |BAM

88

PROFILE … DUNCAN AVIATION

LEARN MORE

nbaa.org/2025

PROFILE … VOLARE AVIATION

“ Volare’s latest refurbishment of a Challenger 604 has transformed the aircraft into an outstanding ownership opportunity.”

Supporting aircraft ownership Nick Isbister, Director of Sales at Volare Aviation, on the company’s recent successes

Q

: Can you give us a quick background briefing on Volare Aviation?

NI: Since the inception of Volare in 2013, our vision has been to redefine what private aviation means for aircraft owners. What began as a turnkey solution for ownership and charter has grown into a business where aircraft sales sit at the heart of what we do. Today, we oversee aircraft acquisitions across the globe, backed by the same trusted team that ensure every detail, from the transaction itself to ongoing care, is handled with precision and ease. At Volare, our passion is opening the sky for our clients, making each purchase, sale, or journey not just possible, but effortless.

Our flagship HQ at London Oxford Airport puts us in a prime position for European access, giving our clients direct access to key destinations with the privacy and efficiency they value most. From this base, our team of experts support every stage of aircraft ownership, from sales and acquisitions to ongoing management, ensuring each client enjoys a streamlined and discreet experience.

90

PROFILE … VOLARE AVIATION

Q: Volare has just completed the refit of a Challenger 604. How did that go?

interior. For buyers, it means stepping straight into an aircraft that feels brand new, without the wait of a factory order.

NI: Volare’s latest refurbishment of a Challenger 604 has transformed the aircraft into an outstanding ownership opportunity, pairing the Challenger 604’s track record for reliability with a completely reimagined, contemporary

The cabin has been thoughtfully redesigned to balance modern elegance with lasting comfort. Premium textiles from Italian house Loro Piana set the tone: a Westbury Light Grey wool

91

PROFILE … VOLARE AVIATION

carpet underfoot, a divan reupholstered in Zealander Plain fabric, and bespoke cushions and throws that bring both refinement and artisanal detail.

“ Our engineering team integrates Starlink’s next-generation hardware directly into each jet, giving owners and passengers global connectivity with ultra-low latency and speeds once thought impossible at altitude.”

Every aspect of the interior, from seating layouts to lighting, has been considered to deliver the warmth and functionality of a private residence in the sky. The result is a turnkey lifestyle asset: ready to fly today, while reflecting the very latest in luxury design.

Our engineering team integrates Starlink’s nextgeneration hardware directly into each jet, giving owners and passengers global connectivity with ultra-low latency and speeds once thought impossible at altitude.

Recently, we completed the UK’s first full Starlink installation on a Challenger 604, enabling its owner to stay reliably connected wherever they fly. From video conferencing and realtime communication to streaming entertainment or keeping in touch with family, this system delivers the same high-speed experience at 40,000 feet that you’d expect on the ground.

With Volare, buyers also gain the assurance that the aircraft has been enhanced inside and out. A refurbished exterior combined with a bespoke interior elevates not only the onboard experience but also the long-term value of the investment. This Challenger 604 stands apart in the marketplace as a modern, desirable, and prestigious choice.

With Volare, every journey, whether for business or leisure, is elevated by uninterrupted global connectivity, ensuring time in the air is just as productive and enjoyable as time at home or in the office.

Q: You have just completed a Starlink broadband implementation. How did that go?

To find out more about Volare’s Starlink services, contact:

sales@volareaviation.co.uk

NI: We’re proud to be an official UK dealership for Starlink satellite internet installations on private aircraft.

|BAM

92

HI-SPEED WI-FI. EVERY AIRFRAME, ANYWHERE.

Small form factor, incredible performance

From the most trusted connectivity provider in business aviation comes Gogo Galileo

STCs for 30+ airframes available or in progress

LEARN MORE