Strubl GmbH & Co. KG

Name ›

Address/P.O. Box › Postal Code/City › State › Contact Person › Telephone › Fax › Email › Website › Number of Employees › Founded (year) ›

Areas of Activity ›

Relevant R&D budget ›

External ›

Collaborations Staiger GmbH & Co. KG

Johannes-Bieg-Straße 8 74391 Erligheim Baden-Wuerttemberg Marc Staiger +49-7143-2707-0 +49-7143-2707-88 sales@staiger.de www.staiger.de 200 1974

Manufacturer of microvalves and fluidic systems for: | Analysis & Medical Technology | Aviation & Space Technology | Sanitary & Water Technology | Industry | Energy Systems | Paper, Printing, & Textile Industry | Automotive

10%

Diverse Research Partners

Member of

Staiger – fluid control excellence for almost 50 years

The owner-managed family business is characterised in particular by a high level of customer orientation, the highest product quality and maximum flexibility. Together with approx. 200 employees, we develop and produce customer-specific solenoid valves and fluidic blocks. Our valves are worldwide benchmarks in miniaturisation and service life. Our wide range of products is used in almost all industries worldwide.

At our factory in Erligheim (30 km north of Stuttgart), we produce everything, from prototypes over mid series up to mass production. All manufacturing and testing equipment is hereby designed and produced in-house. Every single valve is tested and documented 100% before being sent out to the customer.

Valve solutions for medical and analytical technology

Whether for neonatal ventilators, anaesthesia machines in intensive care units, or proportional valves in artificial hearts: reliability is the most important property of a product in medical technology! The long service life and high reproducibility of our solenoid valves testify to high quality standards.

Our competences

Together with our customers, we develop and produce components that not only save lives and improve people’s health, but also eliminate CO2 emissions and represent the communication infrastructure of the future.

Our products are used for

› Ventilation and anaesthesia devices › Incubators for neonatals › Rapid diagnostic systems (IVD) › Sleep apnea therapy devices › Oxygen concentrators › Pipetting systems › artificial hearts

Application examples

O2 nebuliser for ventilators In oxygen therapy or ventilation during an operation, the correct dosage of oxygen or air is vital for the patient’s condition. In response to this specific customer requirement, we have developed a highly effective compact block module.

Designed into the narrow installation space, equipped with various sensors and controllers, these valves fulfill several tasks, providing ventilation support or pressurecontrolled ventilation, each with continuously adjustable oxygen quantity.

The high integration capability of the patented flat armature Spider®-valves in combination with two pressure regulators perform extremely reliably for the benefit of the patient.

Micro valves for point-of-care IVD devices In point-of-care IVD devices, the chemical reagents are typically provided in disposable, single use trays or pouches, that are being inserted into an IVD-device together with the patients’ sample. The function of the IVD device is it then, to activate the reagents in a timely precise cycle and to analyze the results afterwards.

Our Spider®-Microvalves are used inside the IVD device to transport the liquid reagents by applying repeatedly precise air-pressure on every chamber of every reagent involved. For each chamber one valve is required.

In small and compact IVD-devices space is very limited. Hence our 7mm and 5mm-Microvalves perfectly suit for such a task because of their small and compact size as well as the extreme reliable and repeatable switching times.