EFFECTA VAC
EFFICIENT SOLAR HEATING DIFFERENT SIZES Effecta vacuum collectors are available in two different sizes and fits most different kinds of houses. They can be mounted either directly on the roof or on the wall. Our collector is one of the most common around Europe, manufactured in Germany. That is why this is a product with top efficency and a reasonable low price. The quality and design are of course top of the line in the market of solar collectors.
MODERN SOLAR COLLECTORS The advantages with a vacuum collector compared to a flat collector is that you get a more even intake of solar energy around the year. This is because of
the collector is more efficient during spring and autumn than the flat collector. The reason for this is the vacuum isolation around every absorber in the collector. Also there is a well designed reflector plate placed behind the absorbers to increase the efficency even more. The low loss of energy results in more energy in the buffer tank. The collectors frame, reflector and absorber are made of aluminum. The inside copper tubes have a minimum of joints. The connections on the outside are well insulated for less energy losses.
The latest technologies are integrated in the Effecta Vac for the best heat transfer to the fluid in the collector. Every detail are of highest quality and finish. Straps for carrying and pre-assemblied connections are features for an easy mounting. The reflectors helps supplying maximum power on a limited area, not any extra space between the vacuum tubes needed.
Height
mm
1640
Length
mm
1390/2008
Depth
mm
100/100
Number of evacuated tubes
12/18
Gross surface area
m²
2,28/3,41
Aperture area
m²
2,0/3,0
kWh/m2a
596
kg
37 /54
Yield forecast/ Würzburg, Germany, aperture area 3 m2) Weight
Connection diameter Glass tube material Volume
mm
15/15
--
borosilicate 3.3
liter
1,6/2,4
Hailstone test according to DIN EN 12975-2
TÜV test no.
435/142448
Thermal shock test
TÜV test no.
06COL513/1
Max. working overpressure
bar
10
Max. stagnation temperature
cº
295
DIN CERTCO - Register number
--
011-7S113R
Effecta AB, V:a Rågdalsvägen 21, 434 96 Kungsbacka, Sweden. tel: +46-300-223 20 e-mail: info@effecta.se www.effecta.se
EFFECTA ST2
RELIABLE SOLAR ENERGY THE COLLECTOR THAT HAS BEEN AROUND Control system
Effecta ST is a well tried solar collector that has been tested hard in Swedish climate for more than 25 years. Now we have devoleped it and the second generation is here Effecta ST2 The collector is made completely in materials resistant to rust and has a calculated life span of 40 years. Effecta ST2 collects about 463kWh/m² and year and also has easy-to-mount mounting details that makes the collector possible to position on almost any roof.
With Effectas solar controller you get the opportunity to control your solar system at an optimum level. The control system has lots of different programming options to suit the most needs. It for instance controls the speed of the pump depending on how much sun that shines on the collector. This makes the efficency higher and also creates a more even temperature in the buffer.
HIGHEST QUALITY Effecta ST was the first solar collector to be mass produced in Sweden and has been delivered to the market since the beginning of the 80:s and are today mounted on roofs all over Europe. The construction have a simplicity and reliability built in which is necessary to have a good economy during the whole life span of the heating system. Thick insulation helps increasing the efficency.
The pane is easy to mount
Height
mm
2064
Connection diameter
mm
Length
mm
1154
Weight
kg
38
Depth
mm
98
Volume
liter
1,28
Gross surface area
m²
2,71
Thermal shock test
yes
yes
m²
2,21
Max. working overpressure
bar
10
kWh/m2a
433
Max. stagnation temperature
cº
192,3
Aperture area Yield forecast/ Borås, Sweden, aperture area 2,51 m2)
22
Effecta AB V:a Rågdalsvägen 21, 434 96 Kungsbacka, Sweden. tel: +46-300-223 20 e-mail: info@effecta.se www.effecta.se