BODY • POWER UNIT KITS SINGLE ACTING POWER UNIT KITS
KTI Hydraulic Single Acting 12 VDC Dump Trailer pump Part #6900154 12V DC KTI Hydraulic Unit - 103 Power-Up / Gravity-Down; 2.0 GPM @1000PSI; 4.0 Gal. Poly Tank Based on the KTI Core circuit 103, this unit is the fastest, smoothest
and
most
reliable
Single-Acting
12VDC
hydraulic pump available today! Each unit is assembled and tested with only the best quality components at the KTI, California facility. Unit provided with 12 volt DC 4.5 inch motor, Pressure (P) top port allowing flexible hose connection. Pressure balanced gear pump design. Delivers superior performance and efficiency compared
BODY • POWER UNIT KITS
to competitive units that are not pressure balanced.
USE THIS POWER UNIT KIT WITH THE FOLLOWING HOIST KITS:
6900078 TB-8 6900075 TB-20
SPECIFICATIONS • Single acting Power-Up / Gravity -Down • 3200 PSI UP Relief Setting For Increased Lifting Power • Lift, Hold and Lower circuit • 2.0 GPM @ 1000 PSI nominal operation • 16 Quart usable Translucent Reservoir • #6 SAE O-Ring boss port “P" • Horizontal mount • Hand held, two button pendant with 15 foot removable cord • Product of California
FLOW CURVE 2.7 gpm @ 500 psi 2.0 gpm @ 1000 psi 1.7 gpm @ 1500 psi 1.3 gpm @ 3000 psi
FEATURES AND BENEFITS
6900054 SINGLE ACTING PUMP KIT INCLUDES THE FOLLOWING
• •
• •
Power unit includes pressure balance gear pump which runs 10% more efficient than competing brands such as Monarch. Exclusive to our kits is a Load Control Valve that lowers the dump box at a controlled speed whether the box is empty or over loaded in the event of a hose failure. The Load Control Valve simply installs into the the port coming out of the pressure (or load holding) side of the hydraulic cylinder and the pressure hose attaches to the valve. No additional plumbing is required as the external body of the valve is a standard hydraulic fitting. Most competitive systems use a small hole in a fitting to reduce the amount of fluid that can flow back into the tank.
Flow curves such as this are typical with all power units of this nature, be it KTI or any Competitive unit.
POWER UNIT DIMENSIONS Overall length 22.5 inches Width 7.8 inches Height 10.0 inches
• • • • • • •
Single Acting Pump - Relief Setting @3200psi, 16 Quart Poly Reservoir Hose Assy, 110" with 1) 90 degree #6 female JIC fitting and 1) straight #6 female JIC fitting Hose Assy, 120” with 2) straight #6 female JIC fittings Red Battery Cable, Black Battery Cable Load Control Valve Fitting, #6 SAE male X #6 JIC male 90 degree Fitting, #6 SAE male Breather
Motor has true positive and negative terminals versus grounding motor to trailer. Buy with assurance - Factory Warranty covers defects in workmanship, materials and design for a period of 2 years from date of purchase. If purchased with Power Hoist kit the KTI warranty gets extended to 3 years. Purchase a Solar Panel (6250004) plus AC charger (6900317) and extend warranty to 5 YEARS!
KTI recommends using a premium hydraulic oil to ensure optimum performance and system life.Select oil that has anti-wear properties, rust and oxidation inhibitors, foam inhibitors and goodstability. Examples of premium grade hydraulic oils: Chevron Rando HDZ, Mobil DTE 10, DTE 20series, AMSOIL, and Shell Tellus.Automotive Transmission Oils are acceptable under normal conditions.Aviation Oils such as Valvoline ROYCO series or Mobil Aero HF or HFA may be used inprolonged, extreme cold environments.Do NOT use biodegradable hydraulic fluid. Do NOT mix oils.
I18 TexTrail Trailer Parts • 1.844.TexTrail • www.TexTrail.com