Page 1


P R E FAC E

TABLE OF CONTENTS

Axles, Axle Assemblies & Brakes

Section

A

Suspension

Section

B

Tires & Wheels

Section

C

Jacks, Couplers & Winches

Section

D

Towing

Section

E

Cargo Control

Section

F

Chemicals & Coatings

Section G

Body & Frame

Section

H

Hardware & Locks

Section

J

Actuating Systems

Section

K

Lights & Electrical

Section

L

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


P R E FAC E GENERAL TERMS AND CONDITIONS All transactions between you and the Customer (“Customer”) and TexTrail Inc. (“TexTrail”) are subject to the following General Terms and Conditions: 1. All prices are expressed in United States dollars, and do not include freight charges from. Odessa, Texas, Mt. Pleasant, Texas, Houston, Texas, Ocala, Florida, Madill, Oklahoma, Georgia, and Idaho, costs of freight to be paid by Customer. Prices are subject to change without notice, and prices in effect at time of delivery/shipment will apply. Special quotes given on items not shown in TexTrail’s catalog are valid only for the period specified in writing, or 30 days if no period is specified in writing. 2. Unless otherwise agreed to in writing by TexTrail, and Customer, terms are payment by Cash on Delivery (COD). 3. Invoices not paid within 30 days of the invoice date will bear interest at the maximum rate allowed by state law. If unpaid amounts are turned over to an attorney for collection, Customer shall pay all costs of collection, including reasonable attorney’s fees and court costs. 4. Title to items sold and risk of loss and damage shall pass to Customer upon delivery by TexTrail to common carrier or Customer, as the case may be, except that title to (but not risk of loss) shall in the case of items supplied upon credit terms not pass until payment in full has been received by TexTrail. 5. Customer agrees to assume all risks incident to the care, handling, and use of all products purchased; and warrants, by purchase of an item, that Customer is familiar with the item and its proper use. Before using an item, Customer shall give such item reasonable and prudent examination and/or tests to determine the suitability of item for Customer’s intended use. Any item delivered to Customer shall be deemed accepted by Customer unless written notice of defect or nonconformity is received by TexTrail within thirty (30) days after date of delivery. Customer assumes all risk and liability in connection with an item from time of delivery to Customer. 6. Customer agrees to indemnify TexTrail and save TexTrail harmless and free from liability against any and all claims, damages or assertion of liability of every nature whatsoever to persons or property arising out of or in connection with the handling or use of all such products as TexTrail may cause to be delivered to Customer, including but not limited to, any and all claims based on asserted defects of material or workmanship of such products. 7. TEXTRAIL DOES NOT WARRANT ANY PRODUCT, COMPONENTS OR PARTS NOT MANUFACTURED BY TEXTRAIL OR COVERED BY THE WARRANTY OF THE PRODUCT’S MANUFACTURER. TEXTRAIL DOES NOT WARRANT DAMAGE CAUSED BY ABUSE OR MISUSE OF ANY PRODUCT. TEXTRAIL DOES NOT WARRANT DAMAGE CAUSED BY DISASTERS SUCH AS FIRE, FLOOD, WIND, AND LIGHTENING. TEXTRAIL DOES NOT WARRANT DAMAGES CAUSED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS TO PRODUCTS SOLD BY TEXTRAIL INCLUDING EQUIPMENT, MATERIALS OR SUPPLIES. TEXTRAIL DOES NOT WARRANT DEFECTS CAUSED BY FAILURE OF CUSTOMER TO FOLLOW INSTRUCTIONS, MAINTENANCE SCHEDULES, OR WARNINGS PROVIDED WITH THE PRODUCT SOLD BY TEXTRAIL INCLUDING EQUIPMENT, MATERIAL OR SUPPLIES. 8. EXCEPT AS OTHERWISE PROVIDED IN WRITING AND SIGNED BY AN AUTHORIZED OFFICER OF TEXTRAIL, TEXTRAIL DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 9. IN NO CASE SHALL TEXTRAIL BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL THEORY. SUCH EXCLUDED DAMAGES INCLUDE BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE PRODUCT (EQUIPMENT, MATERIALS OR SUPPLIES), FACILITIES OR SERVICES, DOWNTIME, THE CLAIMS OF THIRD-PARTIES INCLUDING THE CUSTOMERS OF CUSTOMER, AND TO DAMAGE/INJURY TO THE PROPERTY. THIS LIMITATION DOES NOT APPLY TO DAMAGES CAUSED BY BREACH OF WARRANTY OF TITLE. SOME STATES/PROVINCES DO NOT ALLOW LIMITS ON WARRANTIES OR ON REMEDIES IN SOME CIRCUMSTANCES. IN SUCH STATES/PROVINCES, THE LIMITS IN THIS PARAGRAPH AND IN THE PARAGRAPH IMMEDIATELY PRECEDING MAY NOT APPLY. 10. Any action for any breach of contract by TexTrail or any breach of warranty must be commenced within 365 days of the date the tender of delivery of the Product (equipment, materials or supplies) is made. 11. This agreement allocates the risk of product failure between TexTrail and the Customer. This allocation is recognized by both parties and is reflected in the price of the goods. The purchaser acknowledges that it has read this agreement, understands it and is bound by its terms. 12. Possession of price lists, brochures, manuals or other TexTrail documents does not constitute an offer by TexTrail to sell at the prices shown.

TEXTRAIL TRAILER PARTS SAFE TOWING INSTRUCTIONS With a trailer in tow, you’re operating a vehicle combination that is longer, heavier, and sometimes wider and taller than you’re used to. So, you’ll have to make some compensating adjustments in your normal driving practices: • Slow Down. Moderate to slow speeds put less strain on your tow vehicle and trailer. • Take a “Shakedown Cruise”. At least one short trial run before your first trip will help. Familiarize yourself with your trailer’s operating characteristics. It also will let you know that the lights, brakes, hitch, etc., are working properly. • Allow Extra Time and Space. You’ll need both when passing and stopping, especially if your trailer is not equipped with brakes. • Check Rear View Mirrors. Doing this frequently will let you know that your trailer is riding properly. We recommend outside rear view mirrors on both sides of your tow vehicle. • Swing Wider. You need to make wider swings at curves and corners because your trailer’s wheels are closer to the inside of a turn than the wheels of your car or truck. • Pass With Extra Care. With trailer in tow, it takes more time and distance to get around a slower vehicle and return to the right lane. • Watch the Wind. To avoid swaying, be prepared for sudden changes in air pressure and wind buffeting when larger vehicles pass from either direction. Slow down a bit and keep a firm hold on your steering wheel. Aim straight down your lane. • Conserve Fuel. You’ll go further on a tank of gas at moderate speeds. Higher speeds increase wind resistance against the trailer and reduce your gas mileage significantly. • Avoid Sudden Starts and Stops. This can cause skidding, sliding, or jackknifing, even if your trailer has brakes. Avoid quick stops while turning. Smooth, gradual starts and stops will improve your gas mileage. • Signal Your Intentions. Let surrounding vehicles know what you intend to do well before you stop, turn, change lanes, or pass.

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


P R E FAC E TEXTRAIL TRAILER PARTS SAFE TOWING INSTRUCTIONS CONTINUED... • Shift to a Lower Gear. A lower gear will help ease the load on the transmission and engine when going over steep hills, sand, gravel, or dirt roads. If your vehicle has an “overdrive” gear, shifting out of overdrive to a lower gear may improve the gas mileage. • Always Be Courteous. Make it as easy as possible for faster-moving vehicles to pass you. Keep to the right of the road and prepare to slow down if passing vehicles need extra time to return to their proper lane. • Don’t Tailgate. Allow at least one car and trailer length between you and the vehicle ahead for each 10mph on your speedometer. If a Problem Occurs: Don’t panic. Stay Calm. If you experience a sudden bumping or fishtailing, it may indicate a flat tire. Don’t jam on the brakes or mash the accelerator in an attempt to drive out of it. Instead, come to a stop slowly as you keep driving in as straight line as possible. If conditions permit, coast to a very slow speed and try to avoid braking, except when your wheels are straight ahead and your trailer and tow vehicle are in line with each other. If your trailer begins to fishtail as you accelerate to highway speed, back off the accelerator a bit. This should stop the fishtailing. If it begins again as you increase speed, stop and check your load. The load should be equalized from side to side and forward enough to put a load on the trailer tongue. Redistribute the load as necessary before continuing.

HOW TO: RETURN OF MERCHANDISE 1. Merchandise may be returned only after a TexTrail Return Merchandise Authorization (RMA) code has been obtained. To obtain the RMA code, contact your servicing division (numbers listed on right page) with the item, quantity and original invoice number. 2. The RMA code, along with customer name, must be shown on all labels and correspondence concerning the returned merchandise. Please do not mark directly on return product. 3. A minimum 15% restocking charge will be assessed on authorized returns of merchandise that was shipped as ordered by the customer. Adjustment to restocking charge may be made by pending condition of returned merchandise. 4. Returns will not be postage/shipping authorized for products that are special orders. 5. All returns must be prepaid and returned within 30 days of authorization in order to receive credit. 6. Credits may take between one and 10 business days. Customers returning merchandise due to error or mis-ordering can/will be charged a 15% restocking fee. 7. Ship returns to address of shipping division with a copy of invoice and any notes or comments that are necessary to expedite the credit and return. DAMAGES OR SHORTAGES IN SHIPMENT EN ROUTE: When a shipment is received damaged or received short (not specified number of pallets, boxes, bundles, etc.) it is the responsibility of the Customer to file a claim directly with the freight carrier within ten (10) days of the receipt of shipment. ORDER RECEIPT DISCREPANCIES Upon receipt of your order please confirm receipt with packing list and notify TexTrail of any quantity or item discrepancies within three (3) business days. SPECIAL NOTES All users of this product catalog be aware that the information presented is significantly affected by factors within the exclusive knowledge of the user including, among other things, service conditions, trailer or tow vehicle configurations and hitch and coupler arrangements, that the users have independently investigated these factors and have solely relied on those investigations when using this catalog, and that it is the responsibility of the user to adequately specify, evaluate and test its trailer/running gear/tow vehicle combinations. Load ratings are function of the maximum load carrying capacity which is limited to the lowest load rating of any individual component selected. For instance, the load rating of a pair of tires or wheels may be lower than other axle components selected. If this is the case, the load carrying capacity of the axle assembly is reduced accordingly. Similarly if the load rating capacity of the coupler is lower than the axle/suspension and tire/wheel assembly, the coupler rating becomes the determining trailer capacity factor. TEXTRAIL is constantly upgrading products to better serve the marketplace. Therefore, TEXTRAIL reserves the right to make product improvements, change specifications or prices, and add or delete products and with substitutions at any time without notice. TEXTRAIL warehouses a wide variety of products that my vary by locale, plus laws and regulations may restrict some specific produces delivery in your area. Please contact your local servicing division to verify availability of products. We look forward to providing each customer with reliable trailer parts and trusted brands nation wide and we hope that each time you purchase you are provided with outstanding customer satisfaction.

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


FENDER LIABILITY FORM

East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568

West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725

Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134

Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143

Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955

Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519


East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568

West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725

Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134

Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143

Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955

Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519


6400102 LH 3.5k 10” x 2-1/4 Elec FSA Assembly 6400103 RH 3.5k 10” x 2-1/4 Elec FSA Assembly 6450135 LH 6K 12” x 2” Electric FSA Assembly 6450136 RH 6K 12” x 2” Electric FSA Assembly


F-5


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Table Of Contents Axles, & Brakes B- R A Axle K EAssemblies S 2,000 lb Capacity TORFLEX® / D20 Leaf Spring Axle Hub Group Brakes Disc Brakes

A-10 A-12 A-13 A-14

3,500 lb Capacity TORFLEX® / D35 Leaf Spring Axle Hub Group Brakes Electric Brakes Disc Brakes 4,400 lb Capacity D44 Leaf Spring Axle Hub Group Brakes 6,000 lb Capacity D60 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Electric Brakes Disc Brakes 7,000 lb Capacity D70 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Electric Brakes Disc Brakes 7,200 lb Capacity D72 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Disc Brakes 8,000 lb Capacity D80 Leaf Spring Axle TORFLEX® Suspension Hub Group Brakes Electric Brakes Disc Brakes

WWW.TEXTRAIL.COM

A-1

A-16 A-18 A-20 A-20 A-26 A-28 A-29 A-30 A-31 A-33 A-36 A-37 A-44 A-45 A-51 A-32 A-34 A-36 A-39 A-44 A-45 A-53 A-32 A-35 A-36 A-41 A-55 A-56

A-32 A-35 A-36 A-42 A-58 A-59 A-63

2010 Copyright by TexTrail, Inc.


9,000 lb - 10,000 lb General Duty Capacity D90 - D100GD Leaf Spring Axle TORFLEX速 Suspension Hub Group Brakes Disc Brakes 10,000 lb Heavy Duty Capacity D100HD Leaf Spring Axle TORFLEX速 Suspension Hub Group Brakes 12,000 lb Heavy Duty Capacity D120 Leaf Spring Axle Hub Group Brakes 15,000 lb Heavy Duty Capacity D150 Leaf Spring Axle Hub Group Brakes 22,500 lb - 27,500 lb Heavy Duty Capacity D200 Leaf Spring Axle Hub Group Brakes Agricultural Hubs and Components Spring Seats Beams Bearing Kits Bearing Protectors Bearings Brake Mounting Flanges Brake Mounting Hardware Center Caps Grease & Oil Seals Grease Caps Heavy Duty Wheel Mounting Hardware Oil Caps Races Retaining Rings Rim Clamps Spindle Parts (Washers, Nuts & Cotter Pins) Spindles Wheel Bolts Wheel Mounting Hardware Wheel Nuts Wheel Studs

WWW.TEXTRAIL.COM

A-2

A-66 A-68 A-66 A-69 A-72 A-71 A-67 A-66 A-67 A-70 A-72 A-67 A-70 A-72 A-67 A-70 A-72

A-76 A-81 A-85 A-87 A-11 A-90 A-94 A-89 A-87 A-87 A-91 A-88 A-91 A-93 A-91 A-89 A-94 A-94 A-84 A-83 A-92 A-91 A-92 A-92

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Table Of Contents - Axles, Assemblies B RAxle AK E S & Brakes


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES

AXLE ASSEMBLIES

This information is intended as a guide for the proper specification and application of running gear, associated components and accessories. We offer a full line of Dexter trailer axles that can be used in many different applications. When specifying any pre-engineered components such as axles, it is the responsibility of the trailer designer to insure compatibility with the vehicle and all of its sub-systems. The maximum load carrying capacity of any assembly is limited to the lowest load rating of any individual component selected. For instance, the load rating of a pair of wheels may be lower than other axle components selected. If this is the case, the load carrying capacity of the axle assembly is reduced accordingly. As a specific example, if the wheels are rated at 1500 pounds each and are used with other components rated at 3500 pounds per axle, the maximum load capacity is limited to 3000 pounds. If the tires are rated at 1400 pounds each and are used on this assembly, the maximum load carrying capacity is limited to 2800 pounds. For your trailer to perform properly and to protect the cargo you are hauling, trailer axles must be of the correct size, placement and type. The size of your trailer axles is going to depend on the size of your trailer. Contrary to popular belief, bigger is not better. Too many people will fall into the trap of purchasing axles and suspension that are oversized for their particular trailer. So, what size trailer axles do you need? 1. The first thing to do is to consider your load. What will you haul? Add the weight of what you will be hauling to the empty weight of your trailer. Once you have this weight the number and capacity of the axles can be made. If you have 10 to no more than 20 percent in reserve then you are right on target. More than 20 percent will cause the ride to stiffen and become harsh. This can cause damage to your trailer and your load in the long run. 2. What type of spindle do you need? You have two options: Straight or Drop. A straight spindle is used most often and places the floor of the trailer over the wheels. A drop spindle is used when the trailer floor needs to be close to the ground, such as a cattle trailer. You will also need to decide if you want the EZLube option for your grease spindle. EZLube is a bearing lube system offered by Dexter for your axle hubs that will keep your trailer running cooler and prolong the life of your bearings. 3. Next, you must choose your trailer wheel “bolt circle” pattern for the hub of the axle. Basically bolt circle is measured by the imaginary circle that is centered on the axle hub and runs through the center point of the wheel studs. An even number of studs is relatively easy to measure since the wheel studs are directly across from one another, but the odd can be a bit tricky to calculate. For an uneven number of studs place a tape measure on one stud, skip the next stud and measure to the third stud. This will give you a measurement of 4.5”, 5”, 5.5” 4.75” or 6.5”. WWW.TEXTRAIL.COM

A-3

2010 Copyright by TexTrail, Inc.


AXLE ASSEMBLIES

4. Will the trailer require brakes? A single axle non commercial utility trailer does not need brakes while most all double and triple axle trailers do. Consult with your local DMV if you are unsure of the requirements of the state where your trailer will be registered. 5. Now you will need to determine the “hub face” for your axle. Measure the hub face to hub face length. The hub face is where the wheel mounts. Write down the total inches of this axle measurement. If you are building a trailer, consider the space necessary for the tire/wheel to fit the trailer frame. Measure the length from the center of one spring seat to the center of the other. The spring seat is where the leaf spring is mounted. Write down this measurement and note if the spring seats are on the top or bottom of the axle.

Hub Face: Distance between hub face to hub face. Track: Distance between tire center to tire center. Spring Center: Distance between center of spring seat to center of spring seat.

TexTrail Trailering Tip: AXLES-GETTING STARTED-SETUP AND Adjustment For Proper performance, all new axles should have the following checked at the specific intervals: Wheel Nut Torque: at 10, 25, and 50 miles Brake Adjustment : at 200 and 300 miles Tire Pressure: to manufacturer’s requirements Brake Synchronization: set brake controller per controller manufacturer’s directions

WWW.TEXTRAIL.COM

A-4

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 2K - 8K - Spring Axles Chart BRA K EDescription S

Explanation of part # S35545EGN96.25P Straight / 3.5K / 5 on 4.5" / Electric / Grease / Non-Cambered / 96.25 Hub Face / Pads Loose S 35 545 E * G N 96.25 P Description S D DD

20 35 60N 60 70 72 80 T440 440 545 545 546 547 550 555 655 865 868 869 UTG I Y E H F S D SA DA T K Q U R

See Electric Options in field below

2 3 4 5 6 7 8 9

These are special options that are only available with the "E" Electric Brake

G Z X N C N CO NO XX.xx XX.xx P

Straight Spindle 4" Drop Spindle 6" Drop Spindle 2,000 lbs Axle Capacity 3,500 lbs Axle Capacity 6,000 lbs Axle Capacity (.191 tube thickness) 6,000 lbs Axle Capacity (.250 tube thickness) 7,000 lbs Axle Capacity 7,200 lbs Axle Capacity 8,000 lbs Axle Capacity 4 on 4" Tapped Hub 4 on 4" Studded Hub 5 on 4.5" Hub 5 on 4.5" Hub 5-1/2" Hub Flange 5 on 4.5" Hub 6-1/2" Hub Flange 5 on 4.75" Hub 5 on 5.0" Hub 5 on 5.5" Hub 6 on 6.5" Hub 8 on 6.5" Hub 8 on 6.5" Hub 5/8" Studs (Flange Nuts) 8 on 6.5" Hub 5/8" Studs (6-109) 5 - Spoke Hub Idler WITH Flange Idler WITH OUT Flange Electric Brake Hydraulic Uni-Servo Brake Hydraulic Free-Backing Brake Hydraulic Duo-Servo Brake Hydraulic Disc Brake Hydraulic Duo-Servo Brake ABS Hydraulic Disc Brake ABS Hydraulic Uni-Servo Brake with Park Hydraulic Free-Backing Brake with Park Hydraulic Duo-Servo Brake with Park UTG Idler Hub UTG Hub & Drum Electric Brake with FSA (Forward Self-Adjusting) Electric Brake with Park Electric Brake with Conduit Connectors (CWP) Electric Brake with 32" Braided Sleeves Electric Brake with 33" Leads Electric Brake with FSA & Conduit Connectors Electric Brake with FSA, CWP & 33" Leads Electric Brake with FSA, CWP, 33" Leads & 32" Braided Sleeves Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Cambered Axle Beam Non-Cambered Axle Beam Cambered Axle Beam / Over Slung Non-Cambered Axle Beam / Slung Hubface measured in quarter inches Spring Center measured in quarter inches Pads Loose

* This field is ignored if special option (2-9) is not selected.

WWW.TEXTRAIL.COM

A-5

2010 Copyright by TexTrail, Inc.


Explanation of part # S10K865EXR74 46-28

Straight / 10K HD / 8 on 6.5" / Electric / Oil Bath Hubs / Standard Suspension / 74" Track Width 46"Spring Center with 5K 3" x 30" Single Slipper Springs Mounted Center with 5K 3” x 30” Single Slipper Springs Mounted S E * X R

74

46

-28

A S

XX* NS 01 33 28 30

ABS Standard 9,000 lb Axle Capacity 10,000 lb General Duty Axle Capacity 10,000 lb Heavy Duty Axle Capacity 12,000 lb Axle Capacity 15,000 lb Axle Capacity 8 on 6.5" Hub 8 on 6.5" Low Profile Hub 8 on 6.5" Hi Profile Hub 8 on 275mm Idler WITH Flange Electric Brake Hydraulic Duo-Servo Brake Hydraulic Disc Brake Air Service Chamber Air Spring Brake Hydraulic Duo-Servo Brake with Park Electric Brake with FSA (Forward Self-Adjusting) Electric Brake with Park Electric Brake with Conduit Connectors (CWP) Electric Brake with 32" Braided Sleeves Electric Brake with 33" Leads Electric Brake with FSA & Conduit Connectors Electric Brake with FSA, CWP & 33" Leads Electric Brake with FSA, CWP, 33" Leads & 32" Braided Sleeves No Slack Manual Slack Auto Slack Standard Spring Seats Adjustable Spring Seats Hub Face / Track Width measured in quarter inches Spring Center measured in quarter inches Pads Loose Springs Mounted No springs 9K 10K GD 10K HD 12K

32

15K

9K 10G 10K 12K 15K 865 86L 86H 87M I E H D A B T

See Electric Options in field below Electric Brake

2 3 4 5 6 7 8 9

These are special options that are only available with the "E" Electric Brake

X M T R J XX.xx XX.xx P *

Description

* This field is ignored if special option (2-9) is not selected.

WWW.TEXTRAIL.COM

A-6

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BAxles R ADescription K E S Chart 9K - 15K - Spring


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 0.9K - 10K Heavy Duty B-RTorflex® A K EAxles S Description Chart Explanation of part # 10TH35545EZQ94.25 79.25 TF10 / 22.5UP / 3.5K / 5 on 4.5" / Electric / E-Z Lube / Low-Pro Side Mount / 94.25 HF 79.25 OB 10

TH

35

545

E

*

Z

Q

94.25

79.25

8 9 10 11 12 13 13G 13D TA TE TB TC TD TG TH 09 20 35 52 60 70 72 80 90 10 T440 440 545 545 546 547 550 555 655 865 868 869 UTG I Y E H F S D SA DA T K Q U R

See Electric Options in field below

2 3 4 5 6 7 8 9

These are special options that are only available with the "E" Electric Brake G Z X N B L M Q BR LR MR QR XX.xx XX.xx

Description Torflex® 8 0.9K Torflex® 9 2K Torflex® 10 3.5K Torflex® 11 5.2K and 6K Torflex® 12 7K and 12V 7.2K Torflex® 13 8K Torflex® 13G 9K or 10K General Duty Torflex® 13D 10K Heavy Duty Torflex 45 Down Arm Torflex 32 Down Arm Torflex 22.5 Down Arm Torflex 10 Down Arm Torflex 0 Degree Arm Torflex 10 Up Arm Torflex 22.5 Up Arm 900 lbs Axle Capacity 2,000 lbs Axle Capacity 3,500 lbs Axle Capacity 6,000 lbs Axle Capacity (.191 tube thickness) 6,000 lbs Axle Capacity (.250 tube thickness) 7,000 lbs Axle Capacity 7,200 lbs Axle Capacity 8,000 lbs Axle Capacity 9,000 lbs Axle Capacity 10,000 lbs Axle Capacity 4 on 4" Tapped Hub 4 on 4" Studded Hub 5 on 4.5" Hub 5 on 4.5" Hub 5-1/2" Hub Flange 5 on 4.5" Hub 6-1/2" Hub Flange 5 on 4.75" Hub 5 on 5.0" Hub 5 on 5.5" Hub 6 on 6.5" Hub 8 on 6.5" Hub 9/16" Studs 8 on 6.5" Hub 5/8" Studs (Flange Nuts) 8 on 6.5" Hub 5/8" Studs (6-109) 5 - Spoke Hub Idler WITH Flange Idler WITH OUT Flange Electric Brake Hydraulic Uni-Servo Brake Hydraulic Free-Backing Brake Hydraulic Duo-Servo Brake Hydraulic Disc Brake Hydraulic Duo-Servo Brake ABS Hydraulic Disc Brake ABS Hydraulic Uni-Servo Brake with Park Hydraulic Free-Backing Brake with Park Hydraulic Duo-Servo Brake with Park UTG Idler Hub UTG Hub & Drum Electric Brake with FSA (Forward Self-Adjusting) Electric Brake with Park Electric Brake with Conduit Connectors (CWP) Electric Brake with 32" Braided Sleeves Electric Brake with 33" Leads Electric Brake with FSA & Conduit Connectors Electric Brake with FSA, CWP & 33" Leads Electric Brake with FSA, CWP, 33" Leads & 32" Braided Sleeves Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Top Mount High Profile Top Mount Low Profile Side Mount High Profile (AP Hanger Kit) Side Mount Low Profile (AP Hanger Kit) Top Mount High Profile Reverse Bracket Top Mount Low Profile Reverse Bracket Side Mount High Profile (AP Hanger Kit) Rev Brkt Side Mount Low Profile (AP Hanger Kit) Rev Brkt Hubface measured in quarter inches Outside Mounting Bracket measured in quarter inches

* This field is ignored if special option (2-9) is not selected.

WWW.TEXTRAIL.COM

A-7

2010 Copyright by TexTrail, Inc.


Explanation of part # 35D84FZC91.25P 3.5K / 4" Drop / 84F Spindle w/ Brake Flange / E-Z Lube / Cambered / 91.25 HF / Pads Loose

35 9 20 35 44 52 60N 60 70 72 80

D

84F

Z

C

91.25

P

S D DD TA TE TB TC TD TG TH BT BTF 84F 42F DX G Z X N C N CU NU B L M Q BR LR MR QR XX.xx XX.xx P

WWW.TEXTRAIL.COM

A-8

Description 900 lbs Axle Capacity 2,000 lbs Axle Capacity 3,500 lbs Axle Capacity 4,400 lbs Axle Capacity 6,000 lbs Axle Capacity (.191 tube thickness) Torflex速 6,000 lbs Axle Capacity (.191 tube thickness) 6,000 lbs Axle Capacity (.250 tube thickness) 7,000 lbs Axle Capacity 7,200 lbs Axle Capacity 8,000 lbs Axle Capacity Straight Spindle 4" Drop Spindle 6" Drop Spindle Torflex 45 Down Arm Torflex 32 Down Arm Torflex 22.5 Down Arm Torflex 10 Down Arm Torflex 0 Degree Arm Torflex 10 Up Arm Torflex 22.5 Up Arm 2,000 lb Capacity Beam 2,000 lb Capacity Beam with Flange 3,500 lb Axle Capacity with Flange 5,200 - 7,000 lb Capacity Beam with Flange 7,200 - 8,000 lb Capacity Beam Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Spring Beam Options Cambered Axle Beam Non-Cambered Axle Beam Cambered Axle Beam / Under Slung Non-Cambered Axle Beam / Under Slung Torflex速 Options Top Mount High Profile Top Mount Low Profile Side Mount High Profile (AP Hanger Kit) Side Mount Low Profile (AP Hanger Kit) Top Mount High Profile Reverse Bracket Top Mount Low Profile Reverse Bracket Side Mount High Profile (AP Hanger Kit) Rev Brkt Side Mount Low Profile (AP Hanger Kit) Rev Brkt Hubface measured in quarter inches Spring Center or Outside Mounting Bracket measured in quarter inches Pads Loose

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRA K Beams E S Description Chart 0.9K - 8K - Spring and Torflex速 Axle


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 9K - 15K Heavy DutyB - Spring R A KAxle E SBeams Description Chart

Explanation of part # 10GSR74 48.5 10K GD / Std Hub & Brake / Std Supsension / 74"HF / 48.5"SC 10G S R 74 48.5 9K 10G 10K 12K 15K S A R J XX.xx XX.xx P

Description 9,000 lb Beam Capacity 10,000 lb General Duty Beam Capacity 10,000 lb Heavy Duty Beam Capacity 12,000 lb Beam Capacity 6,000 lbs Axle Capacity (.191 tube thickness) Torflex速 Standard Hub & Brake Air Standard Spring Seats Adjustable Spring Seats Hubface measured in quarter inches Spring Center measured in quarter inches Pads Loose

9K - 10K Heavy Duty - Torflex速 Axle Beams Description Chart

Explanation of part # 10KTDEXB80 55 10K HD / Zero Degree Arm / Electric / Oil Bath / Hi Pro Top Mount / 80"HF / 55"OB 10K TD E X B 80 55 10G 10K TA TE TB TC TD TG TH I E EF H D G Z X N B L M Q BR LR MR QR XX.xx XX.xx

WWW.TEXTRAIL.COM

A-9

Description 10,000 lb General Duty Beam Capacity 10,000 lb Heavy Duty Beam Capacity Torflex 45 Down Arm Torflex 32 Down Arm Torflex 22.5 Down Arm Torflex 10 Down Arm Torflex Zero Degree Arm Torflex 10 Up Arm Torflex 22.5 Up Arm Idler WITH Flange Electric Brake Electric Brake with FSA (Forward Self-Adjusting) Hydraulic Uni-Servo Brake Hydraulic Disc Brake Greese Spindle EZ-LUBE Spindle Oil Bath NEV-R-LUBE Spindle Top Mount High Profile Top Mount Low Profile Side Mount High Profile (AP Hanger Kit) Side Mount Low Profile (AP Hanger Kit) Top Mount High Profile Reverse Bracket Top Mount Low Profile Reverse Bracket Side Mount High Profile (AP Hanger Kit) Rev Brkt Side Mount Low Profile (AP Hanger Kit) Rev Brkt Hubface measured in quarter inches Outside Mounting Bracket measured in quarter inches

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 2,000 lb Axles B R&AAxle K E Components S

2,000 lb. Spring Axles*

2,000 lb. Leaf Springs Capacity

Part #

Ref#

Type

Double Eye 1.75" x 20-1/4" 3 Leaf

850 lb.

9150071

72-16

Idler

440

545**

Double Eye 1.75" x 20-3/8" 3 Leaf

1,000 lb.

9150006

1020

Idler Straight

6151000

6151012

Double Eye 1.75" x 23-1/4" 3 Leaf

1,750 lb.

9150012

93180

Idler Straight w/ EZ-Lube

6151001

6151013

Double Eye 1.75" x 24" 3 Leaf

1,250 lb.

9150072

75-6

Idler 4" Drop

6151006

6151018

Idler 4"Drop w/ EZ-Lube

6151007

6151019

Description

Part #

Double Eye 1.75" x 25-1/4" 3 Leaf

1,250 lb.

9150073

SW722

Double Eye 1.75" x 25-1/4" 3 Leaf

1,750 lb.

9150013

SW3

500 lb.

9150025

WIC2

Electric 7 x 1-1/4"

440

545**

6151002

6151014

Slipper 1.75" x 24-1/4" 2 Leaf

750 lb.

9150031

WIE3

Electric Straight

Slipper 1.75" x 24" 4 Leaf

1,000 lb.

9150007

WIH4

Electric Straight w/ EZ-Lube

6151003

6151015

Slipper 1.75" x 24-1/4" 5 Leaf

1,300 lb.

9150009

WI5

Electric 4" Drop

6151008

6151020

Slipper 1.75" x 27" 2 Leaf

1,000 lb.

9150070

72-2

Electric 4"Drop w/ EZ-Lube

6151009

6151021

Slipper 1.75" x 27-3/8" 2 Leaf

1,000 lb.

9150065

WID2

Slipper 1.75" x 27-3/8" 3 Leaf

1,500 lb.

9150011

WIF3

Slipper 1.75" x 27-3/8" 4 Leaf

1,750 lb.

9150015

WIG4

Slipper 1.75" x 24-1/4" 3 Leaf

2,000 lb. Hanger Kits Description

Part #

Ref#

Double Eye Single Axle

9100063

APS1

Double Eye Single Axle

9100116

APS2

Double Eye Single Axle

9100087

APS3

Double Eye Single Axle

9100071

APS4

Double Eye Single Axle

9100117

APS5

Slipper Single Axle

9100007

APS3SE

Double Eye Tandem Axle

9100064

APT1

Double Eye Tandem Axle

9100041

APT3

Double Eye Tandem Axle

9100060

APT4

Double Eye Tandem Axle

9100061

APT5

2,000 lb. U-Bolt Kits Description

Part #

Ref#

3/8" Dia 1-3/4" Round 4.03" Long

9100052

APUBR-10

9/16" Dia 2" Square 5-1/2" Long

9150046

9/16" Dia 1-3/4" Square 5-1/2" Long

Hydraulic 7 x 1-3/4" Single-Servo

440

545**

Hydraulic Straight

6151004

6151016

Hydraulic Straight w/ EZ-Lube

6151005

6151017

Hydraulic 4" Drop

6151010

6151022

Hydraulic 4"Drop w/ EZ-Lube

6151011

6151023

*Axles come with 1-1/16" Spindles and either 1-3/4" OD tube on straight and 2-3/8" tube OD on drop spindles.

TF# 9 - 2,000 lb. Torflex® Axles*** Type Idler Idler Idler w/ EZ-Lube

Part # 440 6152000 6152001

Electric 7 x 1-1/4"

545** 6152006 6152007

440

545**

Electric

6152002

6152008

Electric w/ EZ-Lube

6152003

6152009

Hydraulic 7 x 1-3/4" Single-Servo

440

545**

Hydraulic

6152004

6152010

APUB9

Hydraulic w/ EZ-Lube

6152005

6152011

9150054

APUB6

9/16" Dia 1-3/4" Square 5" Long

9100042

APUB3

3/8" Dia 1-3/4" Square 4-1/2" Long

9100053

APUB3

** Please specify 545 Bolt Pattern in either 5-1/2" Hub Flange for 8-12" wheels OR 6-1/2" Hub Flange for 12-15" wheels. 2K axles are standard WITHOUT Brake Flange *** Torflex axles are standard low profile and top mounted.

2,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type

Minimum

Recommended

Maximum

Straight

11.50"

14.75"

15.25"

Drop

15.25"

16.00"

18.00"

TF# 9 - 2,000 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum

Maximum

13.00”

21.75”

Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information.

WWW.TEXTRAIL.COM

A-10

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRA KES Axle Beams 2,000 lb. Spring Beams* Type

7,200 lb. Spring Beams* Part #

2,000 lb. Torflex Beams*

Straight 42F Grease Beam

6100510

Type

Part #

Straight BT Grease Beam

6100500

Straight 42F EZ-Lube Beam

6100511

Torflex #9 Grease Beam

6100534

Straight BT EZ-Lube Beam

6100501

4" Drop 42F Grease Beam

6100530

Torflex #9 EZ-Lube Beam

6100535

4" Drop BT Grease Beam

6100518

4" Drop 42F EZ-Lube Beam

6100531

4" Drop BT EZ-Lube Beam

6100519

8,000 lb. Spring Beams*

3,500 lb. Spring Beams*

Torflex #10 Grease Beam

6100537

Straight DX Oil Bath Beam

6100512

Torflex #10 EZ-Lube Beam

6100536

Torflex #10 EZ-Lube V-Bent

6100920

Straight 84F Grease Beam

6100500

Straight DX EZ-Lube Beam

6100513

Straight 84F EZ-Lube Beam

6100503

4" Drop DX Oil Bath Beam

6100532

4" Drop 84F Grease Beam

6100520

4" Drop DX EZ-Lube Beam

6100533

4" Drop 84F EZ-Lube Beam

6100521

9,000 lb. Spring Beams*

4,400 lb. Spring Beams*

Standard Oil Bath Beam

Straight 84F Grease Beam

6100008

Straight 84F EZ-Lube Beam

6100009

6100514

10,000 lb. General Duty Spring Beams* Standard Oil Bath Beam

6,000 lb. Regular Duty Spring Beams*

6100515

10,000 lb. Heavy Duty Spring Beams*

Straight 42F Grease Beam .191Wall

6100504

Standard Oil Bath Beam

6100516

Straight 42F EZ-Lube Beam .191Wall

6100505

Air Beam

6100517

4" Drop 42F Grease Beam .191Wall

6100524

4" Drop 42F EZ-Lube Beam .191Wall

6100525

12,000 lb. Heavy Duty Spring Beams*

6,000 lb. Heavy Duty Spring Beams* Straight 42F Grease Beam 0.250 Wall

6100506

Straight 42F EZ-Lube Beam 0.250 Wall

6100507

4" Drop 42F Grease Beam 0.250 Wall

6100526

4" Drop 42F EZ-Lube Beam 0.250 Wall

6100527

3,500 lb. Torflex Beams*

Standard Oil Bath Beam

6100394

Air Beam

6100395

15,000 lb. Heavy Duty Spring Beams* Standard Oil Bath Beam

6100551

Air Beam

6100393

* Refer to specific axle page for measurement requirements between Hub Face and Spring Center or Outside Bracket.

Beam

6,000 lb. Torflex Beams* Torflex #11 Grease Beam

6100538

Torflex #11 EZ-Lube Beam

6100539

7,000 lb. Spring Beams* Torflex #12 Grease Beam

6100540

Torflex #12 EZ-Lube Beam

6100541

7,200 lb. Torflex Beams* Torflex #12V Grease Beam

6100542

Torflex #12V EZ-Lube Beam

6100543

8,000 lb. Torflex Beams* Torflex #13 Oil Bath Beam

6100544

Torflex #13 EZ-Lube Beam

6100545

10,000 lb. General Duty Torflex Beams* 9,000 lb. Spring Beams* Standard Oil Bath Beam

7,000 lb. Spring Beams*

6100514

10,000 lb. General Duty Spring Beams*

Straight 42F Grease Beam

6100508

Straight 42F EZ-Lube Beam

6100509

4" Drop 42F Grease Beam

6100528

Standard Oil Bath Beam

6100516

4" Drop 42F EZ-Lube Beam

6100529

Air Beam

6100517

Standard Oil Bath Beam

6100515

10,000 lb. Heavy Duty Spring Beams*

12,000 lb. Heavy Duty Spring Beams*

Torflex Features

Rubber Torsion Suspension Axles

Torflex Features

• Independent wheel suspension and self-clamping action • Rubber cushioning eliminates metal-to-metal contact • Less transfer of road shock for better cargo protection • Heat-treated solid steel inner bar • Forged torsion arm for maximum strength • Rubber cords compounded for dependability • Axle can be used as a load carrying cross member • Easy installation with less overall maintenance • Low profile availability for maximum road clearance • Single or tandem axle assemblies • Five-year limited warranty on suspension system

Standard Oil Bath Beam

6100394

Air Beam

6100395

15,000 lb. Heavy Duty Spring Beams* Standard Oil Bath Beam

6100551

Air Beam

6100393

The Torflex suspension system is a torsion arm type suspension which is completely self contained within the axle tube. It attaches directly to the trailer frame using brackets which are an integral part of the axle assembly. The Torflex axle provides improved suspension characteristics relative to leaf spring axles through the unique arrangement of a steel torsion bar surrounded by four natural rubber cords encased in the main structural member of the axle beam. The wheel/hub spindle is attached to a lever, called the torsion arm, which is fastened to the rubber encased bar. As load is applied, the bar rotates causing a rolling/compressive resistance in the rubber cords. This rotating action provides the same functionality as conventional sprung axles with several operating advantages including independent suspension. Except for periodic inspection of the fasteners used to attach the Torflex axle to the vehicle frame, no other suspension maintenance is required on Torflex axles. They are, of course, subject to the same maintenance and inspection procedures regarding brakes, hubs, bearings, seals, wheels, and tires as outlined in the Dexter Operation Maintenance Service Manual.

Torflex Specifications

• Bearing lubrication options: E-Z Lube, Nev-R-Lube, or Oil (7,000 lbs. and above) • 600 lbs. - 10,000 lbs. capacities, manufactured to the customer’s exact requirements • Ride heights available: 45 deg down, 22.5 deg down, 10 deg down, 0 deg, 10 deg up, & 22.5 deg up • High and low profile brackets with optional mounting brackets available • CAUTION: Triple axle assemblies are not recommended for Torflex axles

WWW.TEXTRAIL.COM

A-13

2010 Copyright by TexTrail, Inc.


BT8 GREASE LUBE PARTS Item

Part #

Ref #

1

7700060

2 3

HUBS

Description

Item

12192TB

Double Lip Seal 1.983" OD x 1.249" ID

Hubs & Drums

7800007

L44643

Inner / Outer Bearing Cone

21

7800046

L44610

Inner / Outer Bearing Cup

7800037-01

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BT8 & BT16 (2K) Replacement Hub and Drum Components B RHub A K &E S

BT8 Bearing Kit (Includes Item 1 - 5)

Part #

Description

Bolt Circle

7650009

8-173-16

½” Stud, Elec Brks Only

4 on 4.00

7650029

8-257-5

½” Stud, Elec Brks Only

5 on 4.50

7650010

8-173-15

½” Tapped, Elec Brks Only

4 on 4.00

23

7650207

8-91-4

½” Tapped

4 on 4.00

24

22

BT16 GREASE LUBE PARTS

Ref #

Plain Hubs

Item

Part #

Ref #

Description

7650012

8-91-5

½” Stud

4 on 4.00

1

7700083

10-60

Double Lip Seal 1.987" OD x 1.5" ID

7650071

8-259-5

½” Stud 8"-12" Wheels

5 on 4.50

7650001

8-258-5

½” Stud 13"-15" Wheels

5 on 4.50

2

7800010

L44649

Inner / Outer Bearing Cone

3

7800046

L44610

Inner / Outer Bearing Cup

BT8 HUBS COMPLETE

BT 16 Bearing Kit (Includes Item 1 - 5)

Includes bearings, seal, cap & lug nuts.

4

8750003

19-2

Cotter Pin

Item

5

8750040

5-101

Tang Washer EZ Lube (Before 2002)

Hubs & Drums

7800038-01

Part #

Ref #

Description

Bolt Circle

6

8750005

6-1

Spindle Nut

7650009-04

BT8 H-D Kit

4 on 4.00

7

7700024

21-3

Grease Cap 1.99"

7650029-04

BT8 H-D Kit

5 on 4.50

8

7700025

21-41-1

Plain Hubs

Grease Cap for EZ Lube 1.99"

9

7700053

85-1

Rubber Plug for EZ Lube

7650012-04

BT8 Hub Kit

4 on 4.00

10

8750046

5-151

Spindle D-Washer 1" ID EZ Lube (Before 2002)

7650071-04

BT8 5.5" Hub Kit

5 on 4.50

11

8750033

5-23

Spindle D-Washer 1" ID EZ Lube (After 2002)

7650071-05

BT8 6.5" Hub Kit

5 on 4.50

12

8750006

6-191

Spindle Special Jam Nut EZ Lube (After 2002)

13

8750030

6-190

Spindle Nut Retainer EZ Lube (After 2002)

BT16 HUBS COMPLETE

STUDS & WHEEL NUTS

Item

Part #

Ref #

Description

Bolt Circle

Hubs & Drums

Item

Part #

Ref #

Description

7650009-02

8-173-91

BT16 H-D Kit

4 on 4.00

14

7700008

7-40

½ -20 Pressed Wheel Stud

7650009-03

8-173-92

BT16 EZ Lube H-D Kit

4 on 4.00

15

7700133

7-246

½ -20 Pressed Wheel Stud

7650029-02

8-257-91

BT16 H-D Kit

5 on 5.00

16

7700045

6-80

½ -20 60 Deg Cone Nut

7650029-03

8-257-92

BT16 EZ Lube H-D Kit

5 on 5.00

17

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

18

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

7650207-02

8-91-90

BT16 Hub Kit Tapped

4 on 4.00

19

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Steel Capped

7650012-02

8-91-91

BT16 Hub Kit

4 on 4.00

7650012-03

8-91-93

BT16 Hub EZ Kit

4 on 4.00

7650071-02

8-259-91

BT16 5.5" Hub Kit

5 on 4.50

7650071-03

8-259-93

BT16 5.5" Hub EZ Kit

5 on 4.50

Plain Hubs

7 x 1¼ BRAKES Item

Part #

Ref #

Description

7650001-02

8-258-91

BT16 6.5" Hub Kit

5 on 4.50

20

6400026

23-47

LH Electric Assembly

7650001-03

8-258-93

BT16 6.5" Hub EZ Kit

5 on 4.50

6400027

23-48

RH Electric Assembly

6400062

23-398

LH Hyd Uni-Servo Assembly

6400063

23-399

RH Hyd Uni-Servo Assembly

WWW.TEXTRAIL.COM

A-14

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7� Brake Assemblies B R A K E&SComponents

7" x 1 1/4" Electric Brake Item

Part # 6400026

Ref # 23-47

Qty/Brk Description 1 LH Electric Assembly 1 RH Electric Assembly

6400027

23-48

1

6450170-01

71-57

1

2

6450004

71-325

1

6450005

71-326

1

6450221

71-361

1

3

6450303

46-23

2

4

6450304

46-24

1

5

6450305

46-114

2

6450006

71-323

1

6

6450302

46-22

1

7

6450301

43-21

1

8

6450075

71-45

1

9

6450038

46-7

1

10

6450181

6-17

4

11

6450241

7-41

4

12

6450099

27-5

1

WWW.TEXTRAIL.COM

Magnet Kit LH Actuating Arm RH Actuating Arm Brake Spring Kit (Contains Items 3-6) Shoe Hold Down Clip Retractor Spring Shoe Centering Spring Adjuster Screw and Spring (Contains Items 6-7) Adjuster Screw Spring Adjuster Screw Shoe & Lining Kit Adjuster Plug 7/16"-20 Brake Mounting Nut 7/16"-20 x 0.89" Brake Mounting Pressed Bolt Wire Clip

A-15

2010 Copyright by TexTrail, Inc.


WWW.TEXTRAIL.COM

A-16

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES

Rotary Style 8" Integral

5 on 4.5" Bolt Pattern

Fits all 4-Bolt Brake Flange with BT16 Spindle

For 10" Wheels

REPLACEMENT PARTS Item

Part #

Ref #

1

6450558

DBCMHGB

Kits contain parts for one complete axle

Other Replacement Parts

Description

Item

Part #

Stainless Steel Guide Bolt M11 x 1.5

Ref # Description 16-17 & 20-27 Not Included in Kits Below

2

6450556

DBCMHBS

Stainless Steel Sleeve

16

7700083

10-60

Double Lip Seal 1.987" OD x 1.5" ID

3

6450560

DBCMHBSB

Rubber Bushing for Guide Bolt

17

7800010

L44649

Inner Bearing Cone

4

6450552

DBCFIFMP90

Adapter Port 90 deg 1/8" NPT to 3/16" FIF

18

7800046

L44610

Inner Bearing Cup

5

6450553

DBCNPTADPBBS

Bleed Port / Screw Assy (contains next two items)

19

7800046

L44610

Outer Bearing Cup

6451000

DBCNPTBBS

Bleed Screw Port 1/4"-28

20

7800010

L44649

Outer Bearing Cone

6451001

DBCNPTADP

Bleed Screw Adapter 1/8"

21

8750033

5-23

Spindle D-Washer 1" Spindle Nut

6450538

DBC2258E

6450539

DBC2258SCAD

Caliper comes w/ items 1-9 6

6450529

DBC225SS

7

6450548

DBC225PISTONSS

8

6450550

9 10 11 12

22

8750005

6-1

Caliper E-Coat

23

8750003

19-2

Cotter Pin

Caliper Silver Cadmium Plated

24

7700024

21-3

Grease Cap 1.99"

Caliper Stainless Steel

25

7700025

21-41-1

2-1/4" Stainless Steel Piston

26

7700053

85-1

Rubber Plug EZ Lube

DBC225SEAL

Piston Rubber Seal

27

6450565

LB169

½ -20 x 1.69 Pressed Wheel Stud

6450551

DBC225BOOT

Rubber Dust Boot

7700109

7-122

½ -20 x 1.84" Long Pressed Wheel Stud

6450536

CMB10I

Caliper Mounting Bracket E-Coat

6450739

LB2.0

½ -20 x 2" Long Pressed Wheel Stud

6450537

CMB10ISCAD

Caliper Mounting Bracket SCD

7700142

7-262

½ -20 x 2.50" Long Pressed Wheel Stud

6450630

DBC225SMPAD

6450620

DBC225CERMPAD

6450515

ROTOR82

Brake Pads (Semi-Metallic)

7700045

6-80

½ -20 60 Deg Cone Nut

Brake Pads (Ceramic)

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

545 8" Rotor Standard Automotive Finish

7700045

6-80

½ -20 60 Deg Cone Nut

545 8" Rotor E-Coat

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

545 8" Rotor Silver Cadmium Plated

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

6450516

ROTOR82E

6450517

ROTOR82SCAD

6450720

HUB/SPACERBT16E

545 8" Hub Spacer BT-16 Spindle E-Coat

6450721

HUB/SPACERBT16SCAD

545 8" Hub Spacer BT-16 Spindle SCAD

28

Grease Cap EZ Lube 1.99"

Mounting Hardware (Not Included in Kits Below) Item

Part #

Ref #

Description

13

6450241

7-75

7/16"-20 x 1-1/4" Grade 8 Bolt

14

7030116

5-8

7/16" Lock Washer

15

6450181

6-17

7/16"-20 Nut

For Salt Water applications it is recommended the use of Stainless Steel Hardware

Rotor Only Kits (Includes Items 1 thru 12 and Races) Item

Part #

Ref #

6450449

2RCMHS82

Description Axle Kit, STD Rotor, E-Coat Caliper

6450450

2RCMHS82E

Axle Kit, E-Coat

6450451

2RCMHS82SCAD

Axle Kit, SCAD Rotor, E-Coat Caliper

WWW.TEXTRAIL.COM

A-17

2010 Copyright by TexTrail, Inc.


3,500 lb. Leaf Springs

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R&AAxle K EComponents S 3,500 lb Axles 3,500 lb. Spring Axles*

Description

Capacity

Part #

Ref#

Type

Part #

Double Eye 1.75" x 20-1/2" 4 Leaf

1,400 lb.

9150049

72-13

Idler

545

5475

550

555

655

Double Eye 1.75" x 23-1/8" 3 Leaf

1,750 lb.

9150057

72-9

Idler Straight

6151100

6151120

6151137

6151153

6151170

Double Eye 1.75" x 23-1/8" 4 Leaf

2,000 lb.

9150064

72-18

Idler Straight w/ EZ-Lube

6151101

6151121

6151138

6151154

6151171

Double Eye 1.75" x 25-1/4" 4 Leaf

2,500 lb.

9150051

72-25

Idler 4" Drop

6151110

6151129

6151145

6151162

6151181

Idler 4"Drop w/ EZ-Lube

6151111

6151130

6151146

6151163

6151182

Double Eye 1.75" x 25-1/4" 3 Leaf

1,750 lb.

9150013

SW3

Double Eye 1.75" x 25-1/4" 4 Leaf

1,750 lb.

9150014

SW4B

Double Eye 1.75" x 25-1/4" 4 Leaf

2,500 lb.

9150016

SW4

Electric 10 x 2-1/4"

545

5475

550

555

655

Slipper 1.75" x 30-1/4" 3 Leaf

1,500 lb

9150011

WIF3

Electric Straight

6151102

6151122

6151139

6151155

6151172

Slipper 1.75" x 30-1/4" 4 Leaf

2,000 lb.

9150015

WIG4

Electric Straight w/ EZ-Lube

6151103

6151123

6151140

6151156

6151173

n/a

n/a

n/a

n/a

6151174

Electric 4" Drop

6151112

6151131

6151147

6151164

6151183

Electric 4"Drop w/ EZ-Lube

6151113

6151132

6151148

6151165

6151184

Electric Straight w/ Nev-R-Lube

3,500 lb. Hanger Kits Description Double Eye Single Axle 1-1/4" Hanger

Part #

Ref#

9100063

APS1

Double Eye Single Axle

9100116

APS2

Hydraulic 10 x 2-1/4" Single-Servo

545

5475

550

555

655

Double Eye Single Axle

9100087

APS3

Hydraulic Straight

6151106

6151125

6151141

6151157

6151175

Double Eye Single Axle

9100071

APS4

Hydraulic Straight w/ EZ-Lube

6151107

6151127

6151142

6151160

6151177

Double Eye Single Axle

9100117

APS5

Hydraulic Straight w/ Nev-R-Lube

n/a

n/a

n/a

n/a

6151178

Double Eye Tandem Axle

9100064

APT1

Hydraulic 4" Drop

6151116

6151133

6151149

6151166

6151185

Double Eye Tandem Axle

9100041

APT3

Hydraulic 4"Drop w/ EZ-Lube

6151117

6151134

6151151

6151168

6151187

Double Eye Tandem Axle

9100060

APT4

Double Eye Tandem Axle 2.625" Strap

9100061

APT5

Hydraulic 10 x 2-1/4" Freeback

545

5475

550

555

655

Double Eye Triple Axle

9100016

APTT3

Hydraulic FB Straight

6151108

6151126

6151143

6151159

6151176

Double Eye Triple Axle

9100017

APTT5

Hydraulic FB Straight w/ EZ-Lube

6151109

6151128

6151144

6151161

6151179

Slipper Single Axle

9100007

APS3SE

Hydraulic FB Straight w/ Nev-R-Lube

n/a

n/a

n/a

n/a

6151180

Slipper Single Axle

9100018

APS6SE

Hydraulic FB 4" Drop

6151118

6151135

6151150

6151167

6151186

Hydraulic FB 4"Drop w/ EZ-Lube

6151119

6151136

6151152

6151169

6151188

Slipper Tandem Axle

9100119

AP202-H202

9100073-04

APT6SE-LD

Slipper Tandem Axle - Medium Duty

9100073

APT6SE-MD

Hydraulic Disc

Slipper Tandem Axle - Heavy Duty

9100020

APT6SE-HD

Hydraulic Straight

6151104

Hydraulic Straight w/ EZ-Lube

6151105

Hydraulic 4" Drop

6151114

Hydraulic 4"Drop w/ EZ-Lube

6151115

Slipper Tandem Axle - Light Duty

3,500 lb. U-Bolt Kits

Description

Part #

Ref#

1/2" Dia 2-3/8" Round 5-1/2" Long

9100045

APUBR-1

1/2" Dia 2-3/8" Round 6-1/2" Long

9100044

APURBR1-XL

9/16" Dia 2" Square 5-1/2" Long

9100046

APUB9

9/16" Dia 1-3/4" Square 5-1/2" Long

9100054

APUB6

545

*Axles come with #84 Spindles and 2-3/8" Tube OD or Optional 3" Tube OD Drop Spindles. 3.5K axles are standard WITH Brake Flange

3,500 lb. Spring Axles difference between Hub Face and Spring Center Axle Type

Minimum

Recommended

Straight

11.25”

16.00”

18.00”

4” Drop

14.00”

16.50”

18.00”

6” Drop

15.75”

16.50”

18.00”

Maximum

Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information.

WWW.TEXTRAIL.COM

A-18

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 3,500 lb Torflex速BAxles R A K&EAxle S Components

NEW GALVANIZED V-BENT TORFLEX AXLE!

TF#10 - 3,500 lb. Torflex速 Hanger Kits Description

TF#10 - 3,500 lb. Torflex速 Axles***

Part #

Ref#

Type

TF10 Side Mount Hanger Kit - Weld On

9100004

A/P-166

Idler

545

5475

Part # 550

555

655

TF10 Side Mount Hanger Kit - Weld On Aluminum

9100222

A/P-181

Idler

6152012

6152022

6152030

6152038

6152046

TF10 High Profile Mount Brackets

6152191

n/a

Idler w/ EZ-Lube

6152013

6152023

6152031

6152039

6152047

*** Torflex axles are standard low profile and top mounted.

Electric 10 x 2-1/4"

545

5475

550

555

655

Electric

6152014

6152024

6152032

6152040

6152048

Electric w/ EZ-Lube

6152015

6152025

6152033

6152041

6152049

n/a

n/a

n/a

n/a

6152050

Electric w/ Nev-R-Lube Hydraulic 10 x 2-1/4" Single-Servo

545

5475

550

555

655

Hydraulic

6152018

6152026

6152034

6152042

6152051

Hydraulic w/ EZ-Lube

6152020

6152028

6152036

6152044

6152053

n/a

n/a

n/a

n/a

6152054

Hydraulic w/ Nev-R-Lube Hydraulic 10 x 2-1/4" Freeback

545

5475

550

555

655

Hydraulic FB

6152019

6152027

6152035

6152043

6152052

Hydraulic FB w/ EZ-Lube

6152021

6152029

6152037

6152045

6152055

n/a

n/a

n/a

n/a

6152056

Hydraulic FB w/ Nev-R-Lube Hydraulic Disc

545

Hydraulic Disc

6152016

Hydraulic Disc w/ EZ-Lube

6152017

3.5K axle comes standard WITH Brake Flange

TF# 10 - 3,500 lb. Torflex速 Axles difference between Hub Face and Outside Mounting Bracket Minimum

Maximum

12.75"

23.50"

WWW.TEXTRAIL.COM

A-19

2010 Copyright by TexTrail, Inc.


GREASE LUBE PARTS

HUBS

Item

Part #

Ref #

Description

Item

1

7700085

10-19

Double Lip Seal 2.565" OD x 1.719" ID

Hubs & Drums

2

7800006

L68149

Inner Bearing Cone

7650030

3

7800041

L68111

Inner Bearing Cup

7650032

4

7800046

L44610

Outer Bearing Cup 1.980" OD

7650034

5

7800010

L44649

Outer Bearing Cone

7650036

8750003

19-2

7650038

6

20

Cotter Pin

7800059-01

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & #84 Spindle (3.5K) Replacement B R AHub K E S& Hub and Drum Components

21

Bearing Kit (Includes Item 1 - 6)

Part #

Ref #

Description

Bolt Circle

8-247-5

½” Stud

5 on 4.50

8-247-12

½” Stud

5 on 4.75

8-249-7

½” Stud

5 on 5.00

8-249-5

½” Stud

5 on 5.50

8-250-5

½” Stud

6 on 5.50

Plain Hubs

7

8750005

6-1

Spindle Nut

8

7700024

21-3

Grease Cap 1.99"

22

9

7700025

21-41-1

Grease Cap EZ Lube 1.99"

7650077

8-256-7

½” Stud

5 on 5.00

10

7700053

85-1

Rubber Plug EZ Lube

7650079

8-256-5

½” Stud

5 on 5.50

8-251-5

½” Stud

6 on 5.50

11

8750033

5-23

Spindle D-Washer 1" ID EZ Lube

12

8750006

6-191

Spindle Special Jam Nut EZ Lube (After 2002)

23

13

8750030

6-190

Spindle Nut Retainer EZ Lube (After 2002)

7650073

8-248-5

½” Stud

5 on 4.50

7650075

8-248-10

½” Stud

5 on 4.75

7650081

HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Item

STUDS & WHEEL NUTS

Part #

Ref #

Description

Bolt Circle

Hubs & Drums

Item

Part #

Ref #

Description

7650030-02

8-247-90

½” Stud

5 on 4.50

14

7700109

7-122

½ -20 Pressed Wheel Stud

7650030-03

8-247-94

½” Stud EZ

5 on 4.50

15

7700045

6-80

½ -20 60 Deg Cone Nut

7650032-02

8-247-93

½” Stud

5 on 4.75

16

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

7650032-03

8-247-95

½” Stud EZ

5 on 4.75

17

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

7650034-02

8-249-91

½” Stud

5 on 5.00

18

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Steel Capped

7650034-03

8-249-95

½” Stud EZ

5 on 5.00

10 x 2¼ BRAKES

7650036-02

8-249-90

½” Stud

5 on 5.50

7650036-03

8-249-96

½” Stud EZ

5 on 5.50

Item

Part #

Ref #

Description

7650038-02

8-250-90

½” Stud

6 on 5.50

19

6400030

23-26

LH Electric Assembly

7650038-03

8-250-91

½” Stud EZ

6 on 5.50

6400033

23-27

RH Electric Assembly

6400102

23-468

LH Forward Self-Adjust Electric Assembly

7650073-02

8-248-90

½” Stud

5 on 4.50

6400103

23-469

RH Forward Self-Adjust Electric Assembly

7650073-03

8-248-95

½” Stud EZ

5 on 4.50

6400060

23-86

LH Electric Park Assembly

7650075-02

8-248-92

½” Stud

5 on 4.75

6400061

23-87

RH Electric Park Assembly

7650075-03

8-248-97

½” Stud EZ

5 on 4.75

6400031

23-312

LH Hydraulic Uni-Servo Assembly

7650077-02

8-256-91

½” Stud

5 on 5.00

6400032

23-313

RH Hydraulic Uni-Servo Assembly

7650077-03

8-256-92

½” Stud EZ

5 on 5.00

6400093

23-330

LH Hydraulic Park Uni-Servo Assembly

7650079-02

8-256-90

½” Stud

5 on 5.50

6400094

23-331

RH Hydraulic Park Uni-Servo Assembly

7650079-03

8-256-95

½” Stud EZ

5 on 5.50

6400095

23-310

LH Hydraulic Duo-Servo Assembly

7650081-02

8-251-90

½” Stud

6 on 5.50

7650081-03

8-251-91

½” Stud EZ

6 on 5.50

6400096

23-311

RH Hydraulic Duo-Servo Assembly

6400064

23-344

LH Hydraulic Free Backing Assembly

6400065

23-345

RH Hydraulic Free Backing Assembly

WWW.TEXTRAIL.COM

Plain Hubs

A-20

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Nev-R-Lube #84 Spindle (3.5K) Replacement B R A K EHub S & Hub and Drum Components

NEV-R-LUBE PARTS 35MM

HUBS WITH BEARING AND WHEEL STUDS

Item

Part #

Ref #

Description

Item

1

7700125

5-150

Spindle Washer 35MM

Hubs & Drums 7

Part # 7650099

Ref #

Description

Bolt Circle

½"-20 Stud 3.5K

6 on 5.50

2

7700126

6-183

Spindle Nut 35MM

3

7700127

92-2

Torque Information Disc 35, 42 & 50MM

4

7700128

69-96

Snap Ring

7700144

7-185

5

7700143

21-84

Hub Cap 35MM

7800063

31-72-3

35MM Bearing Cartridge

7800064

69-94

35MM Bearing Retainer

Item

Part #

Ref #

Description

8-386-80

Includes:

10 x 2 1/4 BRAKES

½"-20 x 1.64" Long Pressed Wheel Stud

STUDS & WHEEL NUTS

Item

Part #

Ref #

Description

6

6400030

23-26

LH Electric 3.5K Assembly

8

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

6400033

23-27

RH Electric 3.5K Assembly

9

7700045

6-80

½ -20 60 Deg Cone Nut

6400060

23-86

LH Electric 3.5K Assembly w/ Park

10

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

6400061

23-87

RH Electric 3.5K Assembly w/ Park

11

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

6400031

23-312

LH Hydraulic Uni-Servo Assembly

6400032

23-313

RH Hydraulic Uni-Servo Assembly

6400093

23-330

LH Hydraulic Uni-Servo Assembly w/ Park

6400094

23-331

RH Hydraulic Uni-Servo Assembly w/ Park

6400095

23-310

LH Hydraulic Duo-Servo Assembly

6400096

23-311

RH Hydraulic Duo-Servo Assembly

6400064

23-344

LH Hydraulic Free Backing Assembly

6400065

23-345

RH Hydraulic Free Backing Assembly

WWW.TEXTRAIL.COM

A-21

2010 Copyright by TexTrail, Inc.


WWW.TEXTRAIL.COM

A-22

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & R A K E S & Components 10” Electric BrakeBAssemblies

Item

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Part # 6400030 6400033 6450165-01 6450227 6450195 6450133 6450134 6450228 6450248 6450226 6450007 6450066 6450222 6450186 6450099 6450241 6450038 6450181 6450001

Ref # 23-26 23-27 71-104 42-97-1 46-80 27-9 47-19 47-20 46-9 5-67 46-18 43-4 71-47 46-77 49-2 27-5 7-41 46-7 6-17 46-16

10" x 2 1/4" Electric Brake Qty/Brk Description 1 LH Electric Assembly 1 RH Electric Assembly 1 Magnet Kit 1 3.5K Oval Magnet for Dexter 10" Electric Brakes 1 Magnet Spring 1 Magnet Retaining Clip 1 LH Actuating Arm 1 RH Actuating Arm 2 Retractor Spring 1 Wing Washer for Brake Shoe 1 Adjuster Screw Spring 1 Adjuster Screw Assembly 1 Shoe & Lining Kit (Includes Item 11-12) 2 Shoe Hold Down Spring & Cup 2 Shoe Hold Down Pin 3 Magnet Wire Retaining Clip 4 7/16”-20 x 0.89” Brake Mounting Pressed Bolt 1 Adjuster Plug 4 7/16”-20 Brake Mounting Nut 1 Wire Grommet 0.437 Dia.

WWW.TEXTRAIL.COM

A-23

2010 Copyright by TexTrail, Inc.


10" x 2 1/4" Forward Self-Adjusting (FSA) Electric Brake Item

Part #

Ref #

Qty/Brk

Description

6400102

23-468

1

LH FSA Electric Assembly

6400103

23-469

1

RH FSA Electric Assembly

1

6450165-01

71-104

1

Magnet Kit

42-97-1

1

2

6450227

46-80

1

Magnet Spring

3

6450195

27-9

1

Magnet Retaining Clip

4

6450133

47-19

1

6450134

47-20

1

RH Actuating Arm

5

6450228

46-9

2

Retractor Spring

3.5K Oval Magnet for Dexter 10” Electric Brakes

LH Actuating Arm

6

6450248

5-67

1

Wing Washer for Brake Shoe

7

***

46-139

1

Adjuster Screw Spring

8

***

48-22

1

LH Adjuster Screw Assembly

***

48-23

1

RH Adjuster Screw Assembly

9

6450293

71-681

1

LH Shoe & Lining Kit (Includes Item 11-12)

6450294

71-682

1

RH Shoe & Lining Kit (Includes Item 11-12)

10

6450222

46-77

2

11

6450186

49-2

2

12

***

46-140

1

LH Lever Spring

***

46-141

1

RH Lever Spring

13

14

Shoe Hold Down Spring & Cup Shoe Hold Down Pin

***

71-530-1

1

LH Adjusting Lever

***

71-530-2

1

RH Adjusting Lever

***

71-533

1

Adjuster Cable

15

***

71-529

1

Hook for FSA Cable

16

6450099

27-5

2

Magnet Wire Retaining Clip

17

6450241

7-41

4

7/16"-20 x 0.89" Brake Mounting Pressed Bolt

18

6450038

46-7

1

Adjuster Plug

19

6450181

6-17

4

7/16"-20 Brake Mounting Nut

20

6450001

46-16

1

Wire Grommet 0.437 Dia.

*** Parts are only replaceable through purchase of FSA Electric Brake Repair Kits

10" x 2 1/4" FSA Electric Brake Service Repair Kit 6451002

71-680

FSA Brake Service Repair Kit for 1-Axle Consisting of the following:

7

***

46-139

2

Adjuster Screw Spring

8

***

48-22

1

LH Adjuster Screw Assembly

8

***

48-23

1

RH Adjuster Screw Assembly

12

***

46-140

1

LH Lever Spring

12

***

46-141

1

RH Lever Spring

13

***

71-530-1

1

LH Adjusting Lever

***

71-530-2

1

RH Adjusting Lever

***

71-533

1

Adjuster Cable

14

WWW.TEXTRAIL.COM

A-24

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B RAssemblies AKES 10” FSA Electric Brake & Components


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B RAssemblies A K E S & Components 10� Hydraulic Brake

Item

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Part # 6400095 6400096 6400031 6400032 6450228 6451004 6450226 6450007 6450051 6450222 6450186 6450256 6450107 6450108 6450250 6450251 6450241 6450038 6450181 6451005

Ref # 23-310 23-311 23-312 23-313 46-9 5-113 46-18 43-4 71-267 46-77 49-2 54-60 54-62 54-63 54-64 54-65 7-41 46-7 6-17 87-1

10" x 2 1/4" Hydraulic Brake Qty/Brk Description 1 LH Duo-Servo Hydraulic Brake Assembly 1 RH Duo-Servo Hydraulic Brake Assembly 1 LH Uni-Servo Hydraulic Brake Assembly 1 RH Uni-Servo Hydraulic Brake Assembly 1 Retractor Spring 1 Anchor Post Washer 1 Adjusting Screw Spring 1 Adjuster Assembly 1 Shoe & Lining Kit 1 Shoe Hold Down Spring & Cup 1 Shoe Hold Down Pin 1 Cylinder Push Rod 1 LH Duo-Servo Wheel Cylinder 1 RH Duo-Servo Wheel Cylinder 1 LH Uni-Servo Wheel Cylinder 1 RH Uni-Servo Wheel Cylinder 4 7/16"-20 x 0.89" Pressed Brake Mounting Stud 1 Adjuster Slot Plug 4 7/16"-20 Brake Mounting Hex Nut 2 Sems (screw & washer assembly) 5/16"-18 x 0.62

WWW.TEXTRAIL.COM

A-25

2010 Copyright by TexTrail, Inc.


10" x 2 1/4" Hydraulic Free Backing Brake Item Part # Ref # Qty/Brk 6400064 23-344 1 6400065 23-345 1 1 46-107-1 1 2 6450228 46-9 1 3 6450265 71-393 1 4 6450222 46-77 1 5 6450186 49-2 1 6 6450225 46-83 1 7 6450007 43-4 1 8 37-69-2 1 9 40-240-2 1 10 5-64 1 11 6451007 46-108-1 1 12 6450241 7-41 4 13 6450256 54-60 1 14 6450250 54-64 1 6450251 54-65 1 15 6451005 87-1 2 16 6450181 6-17 4 17 6450038 46-7 1 6451006 71-514 1 DEMCO 10” x 2 1/4” HFB Marine Brakes 6400028 SB40716 1 6400028 SB40715 1 WWW.TEXTRAIL.COM

Description LH HFB Brake Assembly RH HFB Brake Assembly Shoe Lever Return Spring Retractor Spring Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin Adjusting Screw Spring Adjuster Assembly Travel Link Zinc Shoe Lever Washer 0.382 x 1.28 x 0.1196 Zinc Plated Primary Shoe Return Spring 7/16"-20 x 0.89" Pressed Brake Mounting Stud Cylinder Push Rod LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder Sems (screw & washer assembly) 5/16"-18 x 0.62 7/16"-20 Brake Mounting Hex Nut Adjuster Slot Plug Park Brake Cable LH Hydraulic Brake Assembly-Galvanized RH Hydraulic Brake Assembly-Galvanized A-26

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R A K E S& Components 10” HFB Brake Assemblies


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & R A KAssemblies ES 10� Hydraulic with ParkBBrake & Components

10" x 2 1/4" Hydraulic Brake with Parking Feature Item

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Part #

6400093 6400094 6450228 6451004

6450226 6450007 6450051 6450222 6450186 6450190 6450256 6450107 6450108 6450250 6450251

15 16 17 18 19

6450241 6450038 6450181 6451005 6451006

Ref #

Qty/Brk

23-400 23-401 23-330 23-331 46-9 5-113 46-103 47-118 46-18 43-4 71-267 46-77 49-2 69-55 5-112 54-60 54-62 54-63 54-64 54-65 47-116-1 47-117-1 7-41 46-7 6-17 87-1 71-514

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/2 1 1 1 1 1 1 4 1 4 2 1

WWW.TEXTRAIL.COM

Description

LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Retractor Spring Anchor Post Washer Parking Strut Spring Parking Strut Adjusting Screw Spring Adjuster Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin Retainer Horseshoe Park Lever Washer 3/8" x 0.013 Cylinder Push Rod US (1) DS (2) LH Duo-Servo Wheel Cylinder RH Duo-Servo Wheel Cylinder LH Uni-Servo Wheel Cylinder RH Uni-Servo Wheel Cylinder LH Parking Lever and Pin RH Parking Lever and Pin 7/16"-20 x 0.89" Pressed Brake Mounting Stud Adjuster Slot Plug 7/16"-20 Brake Mounting Hex Nut Sems (screw & washer assembly) 5/16"-18 x 0.62 Park Brake Cable A-27

2010 Copyright by TexTrail, Inc.


Rotary Style 5 on 4.5" Bolt 10" Integral Pattern

Fits all 4-Bolt Brake Flange with #84 Spindle

For 13" & Larger Wheels

REPLACEMENT PARTS Item

Part #

Ref #

1

6450558

DBCMHGB

Stainless Steel Guide Bolt M11 x 1.5

2

6450556

DBCMHBS

3

6450560

4

6450552

5

6450553

Description

Other Replacement Parts Item

Part #

Stainless Steel Sleeve

16

7700085

10-19

Double Lip Seal 2.565" OD x 1.719" ID

DBCMHBSB

Rubber Bushing for Guide Bolt

17

7800006

L68149

Inner Bearing Cone

DBCFIFMP90

Adapter Port 90 deg 1/8" NPT to 3/16" FIF

18

7800041

L68111

Inner Bearing Cup

DBCNPTADPBBS

Bleed Port / Screw Assy (contains next two items)

19

7800046

L44610

Outer Bearing Cup

Ref #

Description

16-17 & 20-27 Not Included in Kits Below

6451000

DBCNPTBBS

Bleed Screw Port 1/4"-28

20

7800010

L44649

Outer Bearing Cone

6451001

DBCNPTADP

Bleed Screw Adapter 1/8"

21

8750033

5-23

Spindle D-Washer 1"

22

8750005

6-1

Spindle Nut

Caliper E-Coat

23

8750003

19-2

Cotter Pin

Caliper Silver Cadmium Plated

24

7700024

21-3

Grease Cap 1.99"

Caliper Stainless Steel

25

7700025

21-41-1

2-1/4" Stainless Steel Piston

26

7700053

85-1

Rubber Plug EZ Lube

27

6450565

LB169

½ -20 x 1.69 Pressed Wheel Stud

Caliper comes w/ items 1-9 6

Kits contain parts for one complete axle

6450527

DBC225E

6450528

DBC225SCAD

6450529

DBC225SS

7

6450548

DBC225PISTONSS

8

6450550

DBC225SEAL

Piston Rubber Seal

9

6450551

DBC225BOOT

Rubber Dust Boot

7700109

7-122

½ -20 x 1.84" Long Pressed Wheel Stud

10

6450536

CMB10I

Caliper Mounting Bracket E-Coat

6450739

LB2.0

½ -20 x 2" Long Pressed Wheel Stud

6450537

CMB10ISCAD

11

6450630

DBC225SMPAD

6450620

DBC225CERMPAD

6450523

12

Caliper Mounting Bracket SCD

Grease Cap EZ Lube 1.99"

7700142

7-262

½ -20 x 2.50" Long Pressed Wheel Stud

7700045

6-80

½ -20 60 Deg Cone Nut

Brake Pads (Ceramic)

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

ROTORHUB10

545 10" Rotor Standard Automotive Finish

7700045

6-80

½ -20 60 Deg Cone Nut

6450524

ROTORHUB10E

545 10" Rotor E-Coat

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

6450525

ROTORHUB10SCAD

545 10" Rotor Silver Cadmium Plated

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

Brake Pads (Semi-Metallic)

28

Mounting Hardware Not Included in Kits Below Item

Part #

Ref #

13

6450241

7-75

14

7030116

5-8

15

6450181

6-17

Description 7/16"-20 x 1-1/4" Grade 8 Bolt 7/16" Lock Washer 7/16"-20 Nut

Rotor Only Kits Includes Items 1 thru 12 and Races Item

For Salt Water applications it is recommended the use of Stainless Steel Hardware

Part #

Ref #

6450507

2HRCM10-K

6450508

2HRCM10E-K

6450509

2HRCM10ESCAD-K

6450510

DBSI-3.5K-MAXX

6450511

DBI-3.5K-MAXX-SS

Description Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat Axle Kit, SCAD Rotor, E-Coat Caliper Axle Kit, MAXX Rotor and Caliper Axle Kit, MAXX Rotor, SS Caliper

6450511

6450508

WWW.TEXTRAIL.COM

A-28

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 3,500 lb Integral Disc B Brake Assemblies & Components RAK ES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R AAssemblies KES 3,500 lb Slip-On Disc Brake & Components

Rotary Style 10" Slip -On

5 on 4.5" Bolt Pattern

Fits all 4-Bolt Brake Flange with #84 Spindle

REPLACEMENT PARTS Item 1 2 3 4 5

6

Part # 6450558 6450556 6450560 6450552 6450553 6451000 6451001 6450527 6450528 6450529

7

6450548

8

6450550

9

6450551

10

6450533 6450534 6450535

11

6450630 6450620

12

6450518 6450519 6450520 6450521

Mounting Hardware

Ref # Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 DBC225E Caliper E-Coat DBC225SCAD Caliper Silver Cadmium Plated DBC225SS Caliper Stainless Steel DBC225PISTONSS 2-1/4" Stainless Steel Piston DBC225SEAL Piston Rubber Seal DBC225BOOT Rubber Dust Boot CMB10U Caliper Mounting Bracket E-Coat CMB10USCAD Caliper Mounting Bracket SCD CMB10USS Caliper Mounting Bracket SS DBC225SMPAD Brake Pads (Semi-Metallic) DBC225CERMPAD Brake Pads (Ceramic) ROTOR10 545 10" Rotor Standard Automotive Finish ROTOR10E 545 10" Rotor E-Coat ROTOR10SCAD 545 10" Rotor Silver Cadmium Plated ROTOR10SS 545 10" Rotor Stainless Steel

6450501

WWW.TEXTRAIL.COM

Kits contain parts for one complete axle

For 14" & Larger Wheels

Not Included in Kits Below Item

Part #

Ref #

Description

13

6450241

7-75

7/16"-20 x 1-1/4" Grade 8 Bolt

14

7030116

5-8

7/16" Lock Washer

15

6450181

6-17

7/16"-20 Nut

For Salt Water applications it is recommended the use of Stainless Steel Hardware

Rotor Only Kits Includes Items 1 thru 12

Item

6450503 A-29

Part #

Ref #

6450500

2RCM10-K

Description Axle Kit, STD Rotor, E-Coat Caliper

6450501

2RCM10E-K

6450502

2RCM10ESCAD-K

Axle Kit, E-Coat, SCAD Caliper

Axle Kit, E-Coat

6450503

DBSO-3.5K-MAXX

Axle Kit, MAXX Rotor and Caliper

6450504

DBSO-3.5K-MAXX-SS

Axle Kit, MAXX Rotor, SS Caliper

6450505

DBSO-3.5K-SS

Axle Kit, Stainless Steel

6450505

2010 Copyright by TexTrail, Inc.


4,400 lb. Leaf Springs

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BR K EComponents S 4,400 lb Axles &A Axle

4,400 lb. Spring Axles*

Description

Capacity

Part #

Ref#

Type

Part #

Double Eye 1.75" x 25-1/4" 4 Leaf

2,500 lb.

9150051

72-25

Electric 10 x 2-1/4"

655

Electric Straight

6151683

Electric Straight w/ EZ-Lube

6151684

Double Eye 1.75" x 25-1/4" 4 Leaf

2,500 lb.

9150016

SW4

Slipper 2" x 24-7/8" 4 Leaf

2,500 lb.

9150074

1003T3

Double Eye 1.75" x 25-1/4" 6 Leaf

3,500 lb.

9150021

SW6

Part #

Ref#

Description

Part #

Ref#

Double Eye Single Axle 1-1/4" Hanger

9100063

APS1

1/2" Diameter 2-3/8" Round 5-1/2" Long

9100045

APUBR-1

Double Eye Single Axle

9100116

APS2

1/2" Diameter 2-3/8" Round 6-1/2" Long

9100044

APURBR1-XL

Double Eye Single Axle

9100087

APS3

Double Eye Single Axle

9100071

APS4

*Axles come with #84 Spindles and 3" OD Tube. 4.4K axles are standard WITH Brake Flange

Double Eye Single Axle

9100117

APS5

Double Eye Tandem Axle

9100064

APT1

Double Eye Tandem Axle

9100041

APT3

Double Eye Tandem Axle

9100060

APT4

Double Eye Tandem Axle 2.625" Strap

9100061

APT5

Double Eye Triple Axle

9100016

APTT3

Double Eye Triple Axle

9100017

APTT5

Slipper Single Axle

9100007

APS3SE

Slipper Single Axle

9100018

APS6SE

Slipper Tandem Axle

9100119

AP202-H202

9100073-04

APT6SE-LD

Slipper Tandem Axle - Medium Duty

9100073

APT6SE-MD

Slipper Tandem Axle - Heavy Duty

9100020

APT6SE-HD

4,400 lb. Hanger Kits

4,400 lb. U-Bolt Kits

Description

Slipper Tandem Axle - Light Duty

4,400 lb. Spring Axles difference between Hub Face and Spring Center Axle Type Straight

Minimum

Recommended

Maximum

12.00”

16.00”

19.00”

Note: See Suspension (Section B) for detailed Hanger and U-Bolt Kit information.

WWW.TEXTRAIL.COM

A-30

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R AHub K E S& Hub and Drum Components #84 Spindle (4.4K) Replacement

GREASE LUBE PARTS Item

Part #

Ref #

1

7700085

10-19

2

7800006

L68149

Inner Bearing Cone

3

7800041

L68111

Inner Bearing Cup

4

7800045

LM67010

Outer Bearing Cup 2.328" OD

5

7800043

LM67048

Outer Bearing Cone

8750003

19-2

6

7800061-02

HUBS

Description

Item

Double Lip Seal 2.565" OD x 1.719" ID

Hubs & Drums 15

Part # 7650151

Ref #

Description

Bolt Circle

8-407-5

½” Stud

6 on 5.50

Plain Hubs

HUBS COMPLETE Includes bearings, seal, cap & lug nuts.

Cotter Pin Bearing Kit (Includes Item 1 - 6)

Item

Spindle Nut

Hubs & Drums

Part #

Ref #

Description

Bolt Circle

7

8750005

6-1

8

7700027

45896

Grease Cap 2.45"

7650151-02

8-407-90

½” Stud

6 on 5.50

9

7700016

21-1-1

Grease Cap EZ Lube 2.45"

7650151-03

8-407-91

½” Stud EZ

6 on 5.50

10

7700053

85-1

Rubber Plug EZ Lube

11

8750033

5-23

Spindle D-Washer 1" ID EZ Lube

12

8750006

6-191

Spindle Special Jam Nut EZ Lube (After 2002)

13

8750030

6-190

Spindle Nut Retainer EZ Lube (After 2002)

STUDS & WHEEL NUTS

10 x 2¼ BRAKES Item

Part #

Ref #

14

6400078

23-454

Description LH Electric Assembly

6400079

23-455

RH Electric Assembly

WWW.TEXTRAIL.COM

A-31

Item

Part #

Ref #

Description

16

7700109

7-122

½ -20 Pressed Wheel Stud

17

7700045

6-80

½ -20 60 Deg Cone Nut

18

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-NGoTM

19

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-NGoTM

20

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Steel Capped

2010 Copyright by TexTrail, Inc.


10" x 2 1/4" Electric Brake Item

Part #

Ref #

1

6400078 6400079 6450166-01

23-454 23-455 71-105 42-99-1 46-80 27-9 47-19 47-20 46-9 5-67 46-18 43-4 71-672 46-77 49-2 27-5 7-271 46-7 6-17 46-16

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

6450227 6450195 6450133 6450134 6450228 6450248 6450226 6450007 6450064 6450222 6450186 6450099 6450307 6450038 6450181 6450001

WWW.TEXTRAIL.COM

Qty/ Brk 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 2 4 1 4 1

Description LH Electric Assembly RH Electric Assembly Magnet Kit 4.4K Oval Magnet for Dexter 10” Electric Brakes Magnet Spring Magnet Retaining Clip LH Actuating Arm RH Actuating Arm Retractor Spring Wing Washer for Brake Shoe Adjuster Screw Spring Adjuster Screw Assembly Shoe & Lining Kit (Includes Item 11-12) Shoe Hold Down Spring & Cup Shoe Hold Down Pin Magnet Wire Retaining Clip 7/16"-20 x 1.18" Brake Mounting Pressed Bolt Adjuster Plug 7/16"-20 Brake Mounting Nut Wire Grommet 0.437 Dia.

A-32

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & R A K E S & Components 10” Electric BrakeBAssemblies


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 6,000 lb Regular and Heavy Duty BRA K EAxles S & Axle Components

6K Light Duty Axles

6K Heavy Duty Axles

Light Duty Axles .191 Wall

Heavy Duty Axles .250 Wall

Type

Part #

Idler

5 Spoke

655

865

5 Spoke

Part # 655

865

Idler Straight w/ Grease

6151247

6151189

6151217

6151342

6151278

6151307

Idler Straight w/ EZ-Lube

6151248

6151190

6151218

6151343

6151279

6151311

Idler Straight w/ Oil

6151249

n/a

6151219

6151344

n/a

6151308

Idler 4" Drop w/ Grease

6151262

6151206

6151232

6151357

6151295

6151326

Idler 4"Drop w/ EZ-Lube

6151263

6151207

6151233

6151358

6151296

6151327

Idler 4"Drop w/ Oil

6151264

n/a

6151234

6151359

n/a

6151328

Electric 12" x 2"

5 Spoke

655

865

5 Spoke

655

865

Electric Straight w/ Grease

6151250

6151191

6151220

6151345

6151280

6151309

Electric Straight w/ EZ-Lube

6151251

6151192

6151221

6151346

6151281

6151310

Electric Straight w/ Oil

6151252

n/a

6151222

6151347

n/a

6151312

n/a

6151193

n/a

n/a

6151282

6151313

6151265

6151208

6151235

6151360

6151297

6151329

Electric 4"Drop w/ EZ-Lube

6151266

6151209

6151236

6151361

6151298

6151330

Electric 4"Drop w/ Oil

6151267

n/a

6151237

6151362

n/a

6151331

Electric Straight w/ Nev-R-Lube Electric 4" Drop w/ Grease

Hydraulic 12" x 2" Single-Servo

5 Spoke

655

865

5 Spoke

655

865

Hydraulic Straight w/ Grease

6151253

6151197

6151223

6151348

6151286

6151314

Hydraulic Straight w/ EZ-Lube

6151255

6151199

6151225

6151350

6151288

6151316

Hydraulic Straight w/ Oil

6151257

n/a

6151227

6151352

6151289

6151318

n/a

6151200

n/a

n/a

n/a

6151319

Hydraulic 4" Drop w/ Grease

Hydraulic Straight w/ Nev-R-Lube

6151268

6151212

6151238

6151363

6151301

6151332

Hydraulic 4"Drop w/ EZ-Lube

6151271

6151214

6151240

6151365

6151303

6151334

Hydraulic 4"Drop w/ Oil

6151273

n/a

6151242

6151367

n/a

6151336

Light Duty 6,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type

Minimum

Recommended

Maximum

Straight

12.75"

16.00"

19.00"

Drop

15.75"

18.50"

19.00"

Hydraulic 12" x 2" Duo-Servo

5 Spoke

655

865

5 Spoke

655

865

Hydraulic Straight w/ Grease

6151259

6151203

6151229

6151354

6151292

6151322

Hydraulic Straight w/ EZ-Lube

6151260

6151204

6151230

6151355

6151293

6151323

Hydraulic Straight w/ Oil

6151261

n/a

6151231

6151356

6151294

6151324

Axle Type

Minimum

Recommended

Maximum

n/a

6151205

n/a

n/a

n/a

6151325

Straight

12.75"

16.25"

20.00"

6151275

6151216

6151244

6151369

6151305

6151338

Drop

15.75"

18.00"

20.00"

6151245

6151370

6151306

6151340

n/a

6151246

6151371

n/a

6151341

Hydraulic Straight w/ Nev-R-Lube Hydraulic 4" Drop w/ Grease Hydraulic 4"Drop w/ EZ-Lube

6151276

Hydraulic 4"Drop w/ Oil

6151277

Hydraulic 12" x 2" Freeback

5 Spoke

655

865

5 Spoke

655

865

Hydraulic FB Straight w/ Grease

6151254

6151198

6151224

6151349

6151287

6151315

Hydraulic FB Straight w/ EZ-Lube

6151256

6151201

6151226

6151351

6151290

6151317

Hydraulic FB Straight w/ Oil

6151258

n/a

6151228

6151353

6151291

6151320

n/a

6151202

n/a

n/a

n/a

6151321 6151333

Hydraulic FB Straight w/ Nev-R-Lube Hydraulic FB 4" Drop w/ Grease

6151269

6151213

6151239

6151364

6151302

Hydraulic FB 4"Drop w/ EZ-Lube

6151272

6151215

6151241

6151366

6151304

6151335

Hydraulic FB 4"Drop w/ Oil

6151274

n/a

6151243

6151368

n/a

6151337

Hydraulic Disc

5 Spoke

655

865

5 Spoke

655

865

Hydraulic Straight

n/a

6151194

n/a

n/a

6151283

n/a

Hydraulic Straight w/ EZ-Lube

n/a

6151195

n/a

n/a

6151284

n/a

Hydraulic Straight w/ Nev-R-Lube

n/a

6151196

n/a

n/a

6151285

n/a

Hydraulic 4" Drop

n/a

6151210

n/a

n/a

6151299

n/a

Hydraulic 4"Drop w/ EZ-Lube

n/a

6151211

n/a

n/a

6151300

n/a

Std #42 Spindle and 3" OD Tube

Heavy Duty 6,000 lb. Spring Axles difference between Hub Face and Spring Center

STD #42 Spindle and 3" OD Tube

0.191" Wall

0.250" Wall Opt 3.5" OD Tube with 0.500" Wall

WWW.TEXTRAIL.COM

A-33

2010 Copyright by TexTrail, Inc.


7,000 lb. Type

Part #

Idler

5 Spoke

7,200 lb.

8,000 lb. Part #

865

865

865 5/8" Studs

865 5/8" Studs

Idler Straight w/ Grease

6151414

6151380

9/16" Studs

(Flange Nut)

(6-109)

Idler Straight w/ EZ-Lube

6151415

6151381

6151461

6151602

6151603

Idler Straight w/ Oil

6151416

6151382

6151460

6151600

6151601

Idler 4" Drop w/ Grease

6151429

6151399

n/a

n/a

n/a

Idler 4"Drop w/ EZ-Lube

6151430

6151400

6151471

6151622

6151623

Idler 4"Drop w/ Oil

6151431

6151401

6151470

6151620

6151621

Electric 12" x 2"

5 Spoke

865

865

Electric Straight w/ Grease

6151417

6151383

6151450

n/a

n/a

n/a

Electric Straight w/ EZ-Lube

6151418

6151384

6151451

6151463

6151606

6151607

Electric Straight w/ Oil

6151419

6151385

6151452

6151462

6151604

6151605

n/a

6151386

6151464

6151608

6151609

Electric 4" Drop w/ Grease

6151432

6151402

6151453

n/a

n/a

n/a

Electric 4"Drop w/ EZ-Lube

6151433

6151403

6151454

6151473

6151626

6151627

Electric 4"Drop w/ Oil

6151434

6151404

6151455

6151472

6151624

6151625

Electric Straight w/ Nev-R-Lube

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7,000 lb - 8,000 lbBAxles Axle R A K& E S Components

9/16" Studs

(Flange Nut)

(6-109)

7,000 lb. Spring Axles difference between Hub Face and Spring Center Axle Type

Minimum

Recommended

Maximum

Straight

13.00”

16.25”

18.00”

Drop

15.75”

17.75”

18.00”

7,200 lb. Spring Axles difference between Hub Face and Spring Center

Hydraulic 12" x 2" Single-Servo

5 Spoke

865

9/16" Studs

(Flange Nut)

(6-109)

Axle Type

Minimum

Recommended

Maximum

Hydraulic Straight w/ Grease

6151420

6151387

n/a

n/a

n/a

Straight

14.00”

15.00”

18.00”

Hydraulic Straight w/ EZ-Lube

6151422

6151389

6151469

6151618

6151619

Drop

15.75”

16.00”

18.00”

Hydraulic Straight w/ Oil

6151424

6151391

6151468

6151616

6151617 n/a

Hydraulic Straight w/ Nev-R-Lube

n/a

6151392

n/a

n/a

Hydraulic 4" Drop w/ Grease

6151435

6151405

n/a

n/a

n/a

Hydraulic 4"Drop w/ EZ-Lube

6151437

6151407

6151477

6151478

6151479

Hydraulic 4"Drop w/ Oil

6151439

6151409

6151476

6151631

6151632

Hydraulic 12" x 2" Duo-Servo

5 Spoke

865

9/16" Studs

(Flange Nut)

(6-109)

Hydraulic Straight w/ Grease

6151426

6151395

n/a

n/a

n/a

Hydraulic Straight w/ EZ-Lube

6151427

6151396

6151466

6151612

6151613

Hydraulic Straight w/ Oil

6151428

6151397

6151465

6151610

6151611

Axle Type

Minimum

Recommended

Maximum

6151615

Straight

16.00"

19.00"

19.00”

Drop

18.00"

19.00"

19.00”

Hydraulic Straight w/ Nev-R-Lube

n/a

6151398

6151467

6151614

Hydraulic 4" Drop w/ Grease

6151441

6151411

n/a

n/a

n/a

Hydraulic 4"Drop w/ EZ-Lube

6151442

6151412

6151475

6151633

6151634

Hydraulic 4"Drop w/ Oil

6151443

6151413

6151474

6151629

6151630

Hydraulic 12" x 2" Freeback

5 Spoke

865

Hydraulic FB Straight w/ Grease

6151421

6151388

Hydraulic FB Straight w/ EZ-Lube

6151423

6151390

Hydraulic FB Straight w/ Oil

6151425

6151393

Hydraulic FB Straight w/ Nev-R-Lube

n/a

6151394

Hydraulic FB 4" Drop w/ Grease

6151436

6151406

Hydraulic FB 4"Drop w/ EZ-Lube

6151438

6151408

Hydraulic FB 4"Drop w/ Oil

6151440

6151410

WWW.TEXTRAIL.COM

A-34

8,000 lb. Spring Axles difference between Hub Face and Spring Center

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & R A K&EAxle S Components 6,000 lb Torflex速BAxles

New Galvanized V-bent Torflex Axle

TF#11 - 6,000 lb. Torflex速 Hanger Kits Description

TF#11 - 6,000 lb. Torflex速 Axles***

Part #

Ref#

Type

TF11 Side Mount Hanger Kit - Weld On

9100002

A/P-167

Idler

655

Part # 865

UTG

TF11 Side Mount Hanger Kit - Weld On Aluminum

9100223

A/P-182

Idler

6152057

6152074

6152093

TF11 High Profile Mount Brackets

6152191

n/a

Idler w/ EZ-Lube

6152058

6152075

6152094

n/a

6152076

6152095

Idler w/ Oil

*** Torflex axles are standard low profile and top mounted.

Electric 12 x 2"

655

865

UTG

Electric

6152059

6152077

6152096

Electric w/ EZ-Lube

6152060

6152078

6152097

n/a

6152080

6152098

6152061

6152079

n/a

Electric w/ Oil Electric w/ Nev-R-Lube Hydraulic 12 x 2" Single-Servo

655

865

UTG

Hydraulic

6152065

6152081

6152099

Hydraulic w/ EZ-Lube

6152067

6152083

6152101

n/a

6152087

6152103

6152068

6152084

n/a

655

865

UTG

Hydraulic

6152071

6152089

6152105

Hydraulic w/ EZ-Lube

6152073

6152090

6152106

Hydraulic w/ Oil

n/a

6152092

6152107

Hydraulic w/ Nev-R-Lube

n/a

6152091

n/a

Hydraulic 12 x 2" Freeback

655

865

UTG

Hydraulic FB

6152066

6152082

6152100

Hydraulic FB w/ EZ-Lube

6152069

6152085

6152102

n/a

6152088

6152104

6152070

6152086

n/a

Hydraulic w/ Oil Hydraulic w/ Nev-R-Lube Hydraulic 12 x 2" Duo-Servo

Demand Better. Demand Dexter.

Hydraulic FB w/ Oil Hydraulic FB w/ Nev-R-Lube Hydraulic Disc

655

Hydraulic Disc

6152062

Hydraulic Disc w/ EZ-Lube

6152063

Hydraulic Disc w/ Nev-R-Lube

6152064

6K axle comes standard WITH Brake Flange

WWW.TEXTRAIL.COM

A-35

2010 Copyright by TexTrail, Inc.


TF#12 - 7,000 lb. Torflex® Hanger Kits Description

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & R A K&EAxle S Components 7,000 lb Torflex®BAxles

TF#12 - 7,000 lb. Torflex® Axles***

Part #

Ref#

Type

TF12 Side Mount Hanger Kit - Weld On

9100003

A/P-168

Idler

865

UTG

TF12 Side Mount Hanger Kit - Weld On Aluminum

9100224

A/P-183

Idler

6152123

6152108

TF12 High Profile Mount Brackets

6152191

n/a

Idler w/ EZ-Lube

6152124

6152109

Idler w/ Oil

6152125

6152110

865

UTG

Electric

6152126

6152111

Electric w/ EZ-Lube

6152127

6152112

Electric w/ Oil

6152129

6152113

Electric w/ Nev-R-Lube

6152128

n/a

865

UTG

Hydraulic

6152130

6152114

Hydraulic w/ EZ-Lube

6152132

6152116

Hydraulic w/ Oil

6152136

6152118

Hydraulic w/ Nev-R-Lube

6152133

n/a

*** Torflex axles are standard low profile and top mounted.

Part #

Electric 12 x 2"

Hydraulic 12 x 2" Single-Servo

Hydraulic 12 x 2" Duo-Servo

865

UTG

Hydraulic

6152138

6152120

Hydraulic w/ EZ-Lube

6152139

6152121

Hydraulic w/ Oil

6152141

6152122

Hydraulic w/ Nev-R-Lube

6152140

n/a

Hydraulic 12 x 2" Freeback

865

UTG

Hydraulic FB

6152131

6152115

Hydraulic FB w/ EZ-Lube

6152134

6152117

Hydraulic FB w/ Oil

6152137

6152119

Hydraulic FB w/ Nev-R-Lube

6152135

n/a

7K axle comes standard WITH Brake Flange

TF# 12 - 7,000 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum

Maximum

15.00”

30.25”

WWW.TEXTRAIL.COM

A-36

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7,200 lb Torflex®BAxles R A K&EAxle S Components TF#12V - 7,200 lb. Torflex® Hanger Kits Description

TF#12V - 7,200 lb. Torflex® Axles***

Part #

Ref#

TF12V Side Mount Hanger Kit - Weld On

9100003

A/P-168

TF12V Side Mount Hanger Kit - Weld On Aluminum

9100224

A/P-183

TF12V High Profile Mount Brackets

6152191

n/a

Type

Part #

Electric 12-1/4" x 2-1/2" Electric

*** Torflex axles are standard low profile and top mounted.

865

865 5/8"

865 5/8"

9/16" Studs

Flng Nuts

6-109

6152142

6152143

6152144

Electric w/ EZ-Lube

6152145

6152146

6152147

Electric w/ Oil

6152148

6152149

6152150

7.2K axle comes standard WITH Brake Flange

TF# 12V - 7,200 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum 14.00”

Maximum 29.50"

8,000 lb Torflex® Axles & Axle Components TF#13 - 8,000 lb. Torflex® Hanger Kits Description

TF#13 - 8,000 lb. Torflex® Axles***

Part #

Ref#

TF13 Side Mount Hanger Kit - Weld On

9100001

A/P-169

TF13 High Profile Mount Brackets

6152191

n/a

*** Torflex axles are standard low profile and top mounted.

Type

Part # 865

865 5/8"

865 5/8"

9/16" Studs

Flng Nuts

6-109

Idler w/ Oil

6152151

6152152

6152153

Idler w/ EZ-Lube

6152154

6152155

6152156

9/16" Studs

Flng Nuts

6-109

Electric w/ Oil

6152157

6152158

6152159

Electric w/ EZ-Lube

6152160

6152161

6152162

Electric w/ Nev-R-Lube

6152163

6152164

6152165

9/16" Studs

Flng Nuts

6-109

Hydraulic w/ Oil

6152175

6152176

6152177

Hydraulic w/ EZ-Lube

6152178

6152179

6152180

Hydraulic w/ Nev-R-Lube

6152181

6152182

6152183

9/16" Studs

Flng Nuts

6-109

Hydraulic Disc w/ Oil

6152166

6152167

6152168

Hydraulic Disc w/ EZ-Lube

6152169

6152170

6152171

Hydraulic Disc w/ Nev-R-Lube

6152172

6152173

6152174

Idler

Electric 12-1/4" x 3-3/8"

Hydraulic 12-1/4" x 3-3/8" Duo-Servo

Hydraulic Disc

8K axle comes standard WITH Brake Flange

TF# 13 - 8,000 lb. Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum

Maximum

18.00”

WWW.TEXTRAIL.COM

43.00” A-37

2010 Copyright by TexTrail, Inc.


6,000 lb. - 8,000 lb Leaf Springs Description

Capacity

Part #

Ref#

6,000 lb. Light Duty

6,000 lb. Heavy Duty

Double Eye 1.75" x 25-1/4" 4 Leaf

2,500 lb.

9150051

72-25

X

Double Eye 1.75" x 25-1/4" 4 Leaf

2,500 lb.

9150016

SW4

Double Eye 1.75" x 26-3/4" 6 Leaf

2,700 lb.

9150017

SW626

X

X

Double Eye 1.75" x 25-1/4" 6 Leaf

3,500 lb.

9150021

SW6

X

X

Double Eye 1.75" x 25-1/4" 5 Leaf

2,900 lb.

9150018

SW5

X

X

Double Eye 1.75" x 27" 6 Leaf

3,800 lb.

9150023

SW627

X

X

7,000-7,200 lb.

8,000 lb.

X X

Slipper 2" x 26-1/2" 5 Leaf

3,400 lb.

9150020

E5226

X

X

X

Slipper 2" x 26-1/2" 6 Leaf

3,750 lb.

9150022

HW5116

X

X

X

Slipper 2" x 26-1/8" 7 Leaf

4,000 lb.

9150034

1403T3

X

X

X

Slipper 2" x 29-1/2" 6 Leaf

4,000 lb.

9150024

E5115

X

X

X

Slipper 2" x 24-7/8" 4 Leaf

2,500 lb.

9150074

1003T3

X

Slipper 2" x 26" 5 Leaf

3,500 lb.

9150000

1203T3

X

X

X

X

Slipper 2" x 26-1/4" 7 Leaf

4,000 lb.

9150035

93165

X

X

X

Slipper 2" x 26-7/8" 7 Leaf

4,000 lb.

9150036

72-51-1

X

X

X

Slipper 2" x 26-7/8" 7 Leaf 5/8"

4,000 lb.

9150038

72-51-2

X

6,000 lb. - 8,000 lb Hanger Kits Part #

Ref#

6,000 lb. Light Duty

6,000 lb. Heavy Duty

7,000-7,200 lb.

Double Eye Single Axle 1-1/4" Hanger

9100063

APS1

X

X

X

Double Eye Single Axle

9100116

APS2

X

X

X

Double Eye Single Axle

9100087

APS3

X

X

X

Double Eye Single Axle

9100071

APS4

X

X

X

Double Eye Single Axle

9100117

APS5

X

X

X

Double Eye Tandem Axle

9100064

APT1

X

X

X

Double Eye Tandem Axle

9100041

APT3

X

X

X

Double Eye Tandem Axle

9100060

APT4

X

X

X

Double Eye Tandem Axle

9100061

APT5

X

X

X

Double Eye Triple Axle

9100016

APTT3

X

X

X

Double Eye Triple Axle

9100017

APTT5

X

X

X

Slipper Single Axle

9100007

APS3SE

X

X

X

X

Slipper Single Axle

9100018

APS6SE

X

X

X

X

Slipper Tandem Axle

9100119

AP202H202

X

X

X

X

Slipper Tandem Axle - Heavy Duty

9100020

APT6SE-HD

X

X

X

X

Slipper Tandem Axle - Medium Duty

9100073

APT6SE-MD

X

X

X

X

8,000 lb.

Description

8,000 lb.

6,000 lb. - 8,000 lb U-Bolt Kits Part #

Ref#

6,000 lb. Light Duty

6,000 lb. Heavy Duty

7,000-7,200 lb.

1/2" Diameter 3" Round 7" Long

9100047

APUBR2

X

X

X

9/16" Diameter 3" Round 7-1/2" Long

9100048

APUBR9

X

X

X

Description

5/8" Diameter 3-1/2" Round 9" Long

9100049

APUBR35

X

9/16" Diameter 3-1/2" Round 7-13/16" Long

9100050

APUBR35L

X

Note: See Suspension (Section B) for detailed Spring, Hanger and U-Bolt Kit information.

WWW.TEXTRAIL.COM

A-38

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Suspension B R AComponents KES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & #42 Spindle (6K LIGHT DUTY - 6K HEAVY DUTY) Hub & Hub and Drum Components B R AReplacement KES

OIL / GREASE LUBE PARTS

HUBS

Item

Part #

Ref #

Description

Item

1

7700073

10-36

Double Lip Seal 3.376"OD x 2.250"ID

Hubs & Drums

7700088

10-63

Unitized Oil Seal 3.376"OD x 2.250"ID

20

7700086

10-10

Double Lip Seal 3.376"OD x 2.125"ID

2

7800026

25580

Inner Bearing Cup

3

7800054

25520

Inner Race Cone

4

7800055

15245

Outer Bearing Cup

*

7800045

LM67010

5

7800027

15123

*

7800043

LM67048

Outer Bearing Cone (6K LT)

Includes bearings, seal, cap & lug nuts.

6

8750003

19-2

Cotter Pin

Item

7

8750005

6-1

Spindle Nut

Hubs & Drums

8

7700027

21-1

Grease Cap 2.44"

*

7650133-02

8-201-90

½” Stud for 5.2K 2.125" SEAL

6 on 5.50

9

7700016

21-42-1

Grease Cap EZ Lube 2.44"

*

7650133-03

8-201-94

½” Stud for 5.2K EZ 2.125" SEAL

6 on 5.50

10

7700053

85-1

Rubber Plug EZ Lube

7650041-02

8-201-9A

½” Stud for 5.2-6K 2.250"

6 on 5.50

11

8750033

5-23

Spindle D-Washer 1" ID EZ Lube

7650041-03

8-201-9B

½” Stud for 5.2-6K EZ 2.250"

6 on 5.50

12

8750006

6-191

Spindle Special Jam Nut EZ Lube (After 2002)

Plain Hubs

13

8750030

6-190

Spindle Nut Retainer EZ Lube (After 2002)

*

7650135-02

8-213-90

½” Stud for 5.2K 2.125" SEAL

6 on 5.50

8750040

5-101

Spindle Tang Washer EZ Lube (Before 2002)

*

7650135-03

8-213-95

½” Stud for 5.2K EZ 2.125" SEAL

6 on 5.50

7650085-04

8-213-96

½” 15123 for 6K 2.25" SEAL

6 on 5.50

7650085-05

8-213-9C

½” 15123 for 6K EZ 2.25" SEAL

6 on 5.50

(Before 10/'97)

Part #

Ref #

Description

7650133

8-201-5

½” Stud 5.2K 2.125" SEAL

6 on 5.50

7650041

8-201-9

½” Stud 5.2-6K 2.250" SEAL

6 on 5.50

7650097

8-213-8

½” Tapped 5.2K

6 on 5.50

7650135

8-213-5

½” Stud 5.2K

6 on 5.50

7650085

8-213-9

½” Stud 15123 6K

6 on 5.50

Bolt Circle

Plain Hubs 21

Outer Bearing Cup (6K LT)

HUBS COMPLETE

Outer Bearing Cone

* 6K Light Duty Only

Part #

Ref #

Description

Bolt Circle

* 6K Light Duty Only STUDS & WHEEL NUTS

12 x 2 BRAKES

Item

Part #

Ref #

Description

Item

Part #

Ref #

14

7700109

7-122

½ -20 x 1.84" Long Pressed Wheel Stud**

22

6400010

23-105

15

7700142

7-262

½ -20 x 2.50" Long Pressed Wheel Stud**

6400036

23-106

LH Electric Assembly

16

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

6400046

23-324

RH Electric Assembly

17

7700045

6-80

½ -20 60 Deg Cone Nut

6400047

23-325

LH Hydraulic Uni-Servo Assembly

18

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

6400068

23-322

RH Hydraulic Uni-Servo Assembly

19

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

6400097

23-323

LH Hydraulic Duo-Servo Assembly

Item 14 - Hubs prior to 1/2004

6400008

23-342

RH Hydraulic Duo-Servo Assembly

Item 15 - Hubs after to 1/2004

6400009

23-343

LH Hydraulic Free Backing Assembly

** Stud length measured under head to end of stud.

WWW.TEXTRAIL.COM

Description

RH Hydraulic Free Backing Assembly

A-39

2010 Copyright by TexTrail, Inc.


Hub and Drum Components

NEV-R-LUBE PARTS 42MM

HUBS WITH BEARING AND WHEEL STUDS

Item

Part #

Ref #

Description

Item

1

7700129

5-147-1

Spindle Washer 42MM

Hubs & Drums

2

7700126

6-183

Spindle Nut 42MM

3

7700127

92-2

Torque Information Disc 35, 42 & 50MM

4

7700128

69-96

Snap Ring

7700109

7-122

5

7700130

21-85

Hub Cap 42MM

7800065

31-73-3

42MM Bearing Cartridge

7800066

69-95

42MM Bearing Retainer

7

Part # 7650100

Ref #

Description

Bolt Circle

8-388-80

½"-20 Stud 5.2K

6 on 5.50

Includes:

12 x 2 BRAKES Item

Part #

Ref #

Description

6

6400010

23-105

LH Electric 6K Assembly

6400036

23-106

6400046

23-324

6400047

½"-20 x 1.84" Long Pressed Wheel Stud

STUDS & WHEEL NUTS Item

Part #

Ref #

Description

8

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

RH Electric 6K Assembly

9

7700045

6-80

½ -20 60 Deg Cone Nut

LH Hydraulic Uni-Servo Assembly

10

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

23-325

RH Hydraulic Uni-Servo Assembly

11

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

6400068

23-322

LH Hydraulic Duo-Servo Assembly

6400097

23-323

RH Hydraulic Duo-Servo Assembly

6400066

23-338

LH Hydraulic Uni-Servo 7K Assembly

6400067

23-339

RH Hydraulic Uni-Servo 7K Assembly

6400069

23-334

LH Hydraulic Uni-Servo 7K Assembly w/Park

6400070

23-335

RH Hydraulic Uni-Servo 7K Assembly w/Park

6400071

23-336

LH Hydraulic Duo-Servo 7K Assembly

6400072

23-337

RH Hydraulic Duo-Servo 7K Assembly

6400008

23-342

LH Hydraulic Free Backing Assembly

6400009

23-343

RH Hydraulic Free Backing Assembly

WWW.TEXTRAIL.COM

A-40

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Nev-R-Lube #42 Spindle (6K LIGHT DUTY DUTY) Replacement Hub & B R A- 6K K EHEAVY S


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R AHub K E&S Hub and Drum Components #42 Spindle (6K - 7K) Replacement

OIL / GREASE LUBE PARTS Item

Part #

Ref #

Description

1

7700073

10-36

Double Lip Seal 3.376"OD x 2.250"ID

7700086

10-10

Double Lip Seal 3.376"OD x 2.125"ID

7700088

10-63

Unitized Oil Seal 3.376"OD x 2.250"ID

**

7800071-01

HUBS Item

Part #

Ref #

Description

Bolt Circle

7650047 7650165

8-174-5

9/16” Stud Grease 5.2-7K

5 Spoke

8-174-6

9/16” Stud Oil 5.2-7K

5 Spoke

7650045

8-219-4

½” Stud Grease 5.2-7K

8 on 6.50

Hubs & Drums 31

Bearing Kit 865-Hub (Includes Items 1-6)

32

*

7800070-01

Bearing Kit UTG-Hub (Includes Items 1-6)

7650050

8-219-13

9/16” Stud Grease 5.2-7K

8 on 6.50

2

7800026

25580

Inner Bearing Cup

7650113

8-219-18

5/8" Stud Grease 5.2-7K

8 on 6.50

3

7800054

25520

Inner Race Cone

7650044

8-219-9

½” Stud Oil 5.2-7K

8 on 6.50

4

7800056

14276

Outer Bearing Cup (865)

7650166

8-219-20

9/16” Stud Oil 5.2-7K

8 on 6.50

*

7800055

15245

Outer Bearing Cup *(UTG)

7650115

8-219-26

5/8" Stud Oil 5.2-7K

8 on 6.50

5

7800017

14125A

Outer Bearing Cone (865)

Plain Hubs

Outer Bearing Cone *(UTG)

33

*

7800027

15123

7650083

8-231-9

½” Stud Grease 5.2-7K

8 on 6.50

6

8750003

19-2

Cotter Pin

7650086

8-231-18

9/16” Stud Grease 5.2-7K

8 on 6.50

7

8750005

6-1

Spindle Nut

7650164

8-231-20

5/8" Stud Grease 5.2-7K

8 on 6.50

8

7700186

21-39

Grease Cap 2.72" (865)

7650008

8-231-16

½” Stud Oil 5.2-7K

8 on 6.50

*

7700027

21-1

Grease Cap 2.44" (UTG)

9

7700018

21-43-1

7700019

21-43-2

Grease Cap EZ Lube Chrome 2.72" (865)

7700016

21-42-1

Grease Cap 2.45" EZ Lube (UTG)

10

7700053

85-1

**

7700029-01

11

7700055

*

* 12

7700029

*

Grease Cap EZ Lube 2.72" (865)

Rubber Plug EZ Lube

Item

Oil Cap Kit (Includes Items 11-13)

Part #

Ref #

Description

Bolt Circle

Hubs & Drums

10-45

O-ring (865)

7650047-02

8-174-90

9/16" Stud Grease 5.2-7K

5 Spoke

10-59

O-ring (UTG)

7650045-02

8-219-9D

½” Stud Grease 5.2-7K

8 on 6.50

21-35

Oil Cap (865)

7650045-03

8-219-9B

½” Stud EZ 5.2-7K

8 on 6.50

21-40

Oil Cap (UTG)

7650044-03

8-219-9E

½” Stud Oil 5.2-7K

8 on 6.50

Oil Cap Plug 7650083-02

8-231-9E

½” Stud Grease 5.2-7K

8 on 6.50

Item

Part #

Ref #

34

6400010

23-105

LH Electric DXQ-6K Assy

6400036

23-106

RH Electric DXQ-6K Assy

6400081

23-458

LH Electric Forward Self Adjust 6K Assy

6400082

23-459

RH Electric Forward Self Adjust 6K Assy

13

7700052

46-32

14

7700051

46-52

Oil Fill Hole Plug

15

8750034

5-57

Spindle D-Washer 1" ID

6-5

Rim Clamp Nut 9/16"-18

16

HUBS COMPLETE Includes bearings, seal, cap & lug nuts.

17

7700058

15-2

Rim Clamp 14.5" MH & Utility

18

8750006

6-191

Special Jam Nut EZ Lube (After '02)

19

8750030

6-190

Nut Retainer EZ Lube (After '02)

8750040

5-101

Tang Washer EZ Lube (Before '02)

* UTG Hub Only

Plain Hubs

12 x 2 BRAKES

** Oil Lube Only

STUDS & WHEEL NUTS

Description

Item

Part #

Ref #

Description

6400037

23-180

LH Electric 7K Assy

20

7700109

7-122

½ -20 x 1.84" Long Pressed Wheel Stud**

6400038

23-181

RH Electric 7K Assy

21

7700142

7-262

½ -20 x 2.50" Long Pressed Wheel Stud**

6400083

23-464

LH Electric Forward Self Adjust 7K Assy

22

7700112

7-132

9/16"-18 x 2.30" Long Pressed Wheel Stud**

6400084

23-465

RH Electric Forward Self Adjust 7K Assy

23

7700156

7-232

5/8"-18 x 2.75" Long Pressed Wheel Stud**

6400066

23-338

LH Hydraulic Uni-Servo 7K Assy

24

7700090

25-11

9/16-18 x 3.06" Long Wheel Stud**

6400067

23-339

RH Hydraulic Uni-Servo 7K Assy

25

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

6400069

23-334

LH Hydraulic Uni-Servo 7K Park Assy

26

7700045

6-80

½ -20 60 Deg Cone Nut

6400070

23-335

RH Hydraulic Uni-Servo 7K Park Assy

27

7700036

6-53

9/16"-18 60 Deg Cone Nut

6400071

23-336

LH Hydraulic Duo-Servo 7K Assy

28

7700048

6-109

5/8"-18 90 Deg Cone Nut

6400072

23-337

RH Hydraulic Duo-Servo 7K Assy

29

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

6400008

23-342

LH Hydraulic Free Backing 7K Assy

30

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

6400009

23-343

RH Hydraulic Free Backing 7K Assy

Item 20 - Hubs prior to 1/2004

Item 21 - Hubs after to 1/2004

Item 24 -UTG Hub Only

** Stud length measured under head to end of stud.

WWW.TEXTRAIL.COM

A-41

2010 Copyright by TexTrail, Inc.


NEV-R-LUBE PARTS 42MM & 50MM Item 1

Part #

HUBS WITH BEARING AND WHEEL STUDS

Ref #

Description

Item

Hubs & Drums

7700131

5-149

Spindle Washer 50MM

7700129

5-147-1

Spindle Washer 42MM

7

Part #

Ref #

7650101

8-385-82

Description

Bolt Circle

½"-20 Stud 6-7K

8 on 6.50

2

7700126

6-183

Spindle Nut

3

7700127

92-2

Torque Information Disc 35, 42 & 50MM

7700109

7-122

Includes:

4

7700128

69-96

Snap Ring

7800067

31-71-3

50MM Bearing Cartridge

5

7700132

21-86

Hub Cap 50MM

7800068

69-93

50MM Bearing Retainer

7700130

21-85

Hub Cap 42MM

7650089

8-385-81

½"-20 x 1.84" Long Pressed Wheel Stud

9/16"-18 Stud 6-7K

8 on 6.50

Includes: 7700123

7-223

12 x 2 BRAKES

7800067

31-71-3

9/16"-18 x 2" Long Pressed Wheel Stud 50MM Bearing Cartridge 50MM Bearing Retainer

Item

Part #

Ref #

Description

7800068

69-93

6

6400010

23-105

LH Electric Assembly

7650102

8-385-80

6400036

23-106

RH Electric Assembly

6400037

23-180

LH Electric 7K Assembly

7700145

7-224

6400038

23-181

RH Electric 7K Assembly

7800067

31-71-3

50MM Bearing Cartridge

6400066

23-338

LH Hydraulic Uni-Servo 7K Assembly

7800068

69-93

50MM Bearing Retainer

6400067

23-339

RH Hydraulic Uni-Servo 7K Assembly

7650100

8-388-80

6400069

23-334

LH Hydraulic Uni-Servo 7K Assembly w/Park

6400070

23-335

RH Hydraulic Uni-Servo 7K Assembly w/Park

7700109

7-122

6400071

23-336

LH Hydraulic Duo-Servo 7K Assembly

7800065

31-73-3

42MM Bearing Cartridge

6400072

23-337

RH Hydraulic Duo-Servo 7K Assembly

7800066

69-95

42MM Bearing Retainer

6400008

23-342

LH Hydraulic Free Backing Assembly

6400009

23-343

RH Hydraulic Free Backing Assembly

Item

Part #

Ref #

Description

8

7700176

6-201

9

7700045

6-80

½ -20 60 Deg Cone Nut

10

7700036

6-53

9/16"-18 60 Deg Cone Nut Zinc Plated

11

7700048

6-109

5/8"-18 60 Deg Cone Nut Zinc Plated

12

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

13

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

5/8"-18 Stud 6-7K

8 on 6.50

Includes: 5/8"-18 x 2.5" Long Pressed Wheel Stud

½"-20 Stud 6K

6 on 5.50

Includes: ½"-20 x 1.84" Long Pressed Wheel Stud

STUDS & WHEEL NUTS

WWW.TEXTRAIL.COM

A-42

½ -20 60 Deg Cone Nut Standard Torq-N-

GoTM

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R A K EHub S & Hub and Drum Components Nev-R-Lube #42 Spindle (6K - 7K) Replacement


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7.2K Replacement Hub B R&AHub K E and S Drum Components

OIL / GREASE LUBE PARTS

HUBS

Item

Part #

Ref #

Description

Item

1

7700073

10-36

Double Lip Seal 3.376"OD x 2.250"ID

Hubs & Drums 24

*

7700088

10-63

Unitized Oil Seal 3.376"OD x 2.250"ID

2

7800026

25580

Inner Bearing Cup

3

7800054

25520

Inner Race Cone

4

7800057

02420

Outer Bearing Cup

5

7800028

02475

Outer Bearing Cone

6

8750003

19-2

Cotter Pin

7

8750005

6-1

Spindle Nut

8

7700186

21-39

9

7700018

21-43-1

Grease Cap EZ Lube 2.72"

7700019

21-43-2

Grease Cap EZ Lube Chrome 2.72"

10

7700053

85-1

*

7700029-01

11

7700055

10-45

O-ring (865)

12

7700029

21-35

Oil Cap (865)

13

7700052

46-32

Oil Cap Plug

7700051

46-52

Oil Fill Hole Plug

Part # 7650197

Ref # 8-393-4

8750034

5-57

Spindle D-Washer 1" ID

6-191

Special Jam Nut EZ Lube (After '02)

16

8750030

6-190

Nut Retainer EZ Lube (After '02)

8750040

5-101

Tang Washer EZ Lube (Before '02)

* Oil Lube Only

8 on 6.50

7650154

8-393-6

5/8” Stud Grease 7.2K

7650114

8-393-3

9/16” Stud Oil 7.2K

8 on 6.50 8 on 6.50

(After 5/00 with cast backing plate) 7650119

8-393-5

5/8” Stud Oil 7.2K

8 on 6.50

(After 5/00 with cast backing plate) 7650061

8-355-13

9/16” Stud Grease 7.2K

8 on 6.50

(Before 5/00 with stamped backing plate) 7650199

8-355-12

9/16” Stud Oil 7.2K

Oil Cap Kit (Includes Items 11-13)

8750006

9/16” Stud Grease 7.2K

(After 5/00 with cast backing plate)

Rubber Plug EZ Lube

15

Bolt Circle

(After 5/00 with cast backing plate)

Grease Cap 2.72"

14

Description

8 on 6.50

(Before 5/00 with stamped backing plate) 8-355-15

5/8” Stud Grease 7.2K

8 on 6.50

(Before 5/00 with stamped backing plate) 8-355-14

5/8” Stud Oil 7.2K

8 on 6.50

(Before 5/00 with stamped backing plate)

HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Part #

Item

Ref #

Description

Bolt Circle

9/16" Stud Grease 7.2K

8 on 6.50

Hubs & Drums 7650197-02

8-393-91

STUDS & WHEEL NUTS Item

Part #

Ref #

Description

17

7700145

7-224

5/8"-18 x 2.50" Pressed Wheel Stud**

18

7700123

7-223

9/16"-18 x 2.01" Pressed Wheel Stud**

19

7700036

6-53

9/16"-18 60 Deg Cone Nut Zinc Plated

20

7700048

6-109

5/8"-18 60 Deg Cone Nut Zinc Plated

21

7700034

6-58

5/8"-18 Flange Nut

(After 5/00 with cast backing plate) 7650061-02

8-355-93

9/16" Stud Grease 7.2K

8 on 6.50

(Before 5/00 with stamped backing plate)

12 ¼ x 2 ½ BRAKES Item

Part #

Ref #

22

6450300

36-118-20

Dust Shield (not included with brake assembly)

36-110

Dust Shield Top (included with brake assembly)

36-110-01

Dust Shield Top (included with brake assembly)

** Stud length measured under head to end of stud.

Description (After 5/00 with cast backing plate) (Before 5/00 with stamped backing plate) (Before 5/00 with stamped backing plate)

23

6400057

23-428

LH Electric 7.2K Assy (4-Bolt)

6400058

23-429

RH Electric 7.2K Assy (4-Bolt)

6400011

23-370

LH Electric 7.2K Assy (9-Bolt)

6400012

23-369

RH Electric 7.2K Assy (9-Bolt)

(After 5/00 with cast backing plate) (After 5/00 with cast backing plate) (Before 5/00 with stamped backing plate) (Before 5/00 with stamped backing plate)

WWW.TEXTRAIL.COM

A-43

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R AHub K E &S Hub and Drum Components Nev-R-Lube 7.2K - 8K Replacement

7.2K NEV-R-LUBE NEV-R-LUBE PARTS 50MM

HUBS WITH BEARING AND WHEEL STUDS

Item

Part #

Ref #

Description

Item

1

7700131

5-149

Spindle Washer 50MM

Hubs & Drums

Part #

2

7700126

6-183

Spindle Nut

3

7700127

92-2

Torque Information Disc 35, 42 & 50MM

8

Ref # 8-395-80

Description

Bolt Circle

9/16” Stud Nev-R-Lube 7.2K

8 on 6.50

Includes:

4

7700128

69-96

Snap Ring

7700123

7-223

5

7700132

21-86

Hub Cap 50MM

7800067

31-71-3

50MM Bearing Cartridge

69-93

50MM Bearing Retainer

7800068

8-395-81

12-1/4 x 2-1/2 BRAKES Item

Part #

Ref #

6

6450113

36-115-20

7

9/16"-18 x 2" Long Pressed Wheel Stud

5/8” Stud Nev-R-Lube 7.2K Includes:

Description

7700145

7-224

Dust Shield

7800067

31-71-3

50MM Bearing Cartridge

7800068

69-93

50MM Bearing Retainer

6400057

23-428

LH Electric 7.2K Assembly

6400058

23-429

RH Electric 7.2K Assembly

8 on 6.50

5/8"-18 x 2.5" Long Pressed Wheel Stud

WHEEL NUTS Item

Part #

Ref #

Description

9

7700036

6-53

9/16"-18 60 Deg Cone Nut Zinc Plated

7700048

6-109

5/8"-18 60 Deg Cone Nut Zinc Plated

7700034

6-58

5/8"-18 Flange Nut Zinc Plated

8K NEV-R-LUBE NEV-R-LUBE PARTS 50MM

HUBS WITH BEARING AND WHEEL STUDS

Item

Part #

Ref #

Description

Item

Part #

1

7700131

5-149

Spindle Washer 50MM

Hubs & Drums

2

7700126

6-183

Spindle Nut

3

7700127

92-2

Torque Information Disc 35, 42 & 50MM

4

7700128

69-96

Snap Ring

7700145

7-224

5

7700132

21-86

Hub Cap 50MM

7800067

31-71-3

50MM Bearing Cartridge

7800068

69-93

50MM Bearing Retainer

8

Ref #

Description

Bolt Circle

8-389-80

5/8” Stud Nev-R-Lube 8K

8 on 6.50

Includes:

12-1/4 x 3-3/8 BRAKES

8-389-81

5/8"-18 x 2.5" Long Pressed Wheel Stud

9/16” Stud Nev-R-Lube 8K

8 on 6.50

Includes:

Item

Part #

Ref #

6

6450113

36-115-20

7

Description

7700123

7-223

Dust Shield

7800067

31-71-3

50MM Bearing Cartridge

7800068

69-93

50MM Bearing Retainer

6400039

23-434

LH Electric 8K Assembly

6400040

23-435

RH Electric 8K Assembly

6400041

23-402

LH Hydraulic Duo-Servo 8K Assembly

6400042

23-403

RH Hydraulic Duo-Servo 8K Assembly

WWW.TEXTRAIL.COM

9/16"-18 x 2" Long Pressed Wheel Stud

WHEEL NUTS Item

Part #

Ref #

Description

9

7700036

6-53

9/16”-18 60 Deg Cone Nut Zinc Plated

7700048

6-109

5/8”-18 60 Deg Cone Nut Zinc Plated

A-44

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 8K Replacement HubB&RHub A K and E S Drum Components

OIL LUBE PARTS

HUBS

Item

Part #

Ref #

Description

1

7700073

10-36

Double Lip Seal 3.376"OD x 2.250"ID

7700088

10-63

Unitized Oil Seal 3.376"OD x 2.250"ID

2

7800026

25580

Inner Bearing Cup

7650155

3

7800054

25520

Inner Race Cone

7650051

4

7800057

02420

Outer Bearing Cup

7650053

5

7800028

02475

Outer Bearing Cone

6

8750003

19-2

Cotter Pin

7

8750005

6-1

Spindle Nut

8

7700055

10-45

O-ring

9

7700029

21-35

Oil Cap

10

7700052

46-32

Oil Cap Plug

7700051

46-52

Oil Fill Hole Plug

7700029-01

Oil Cap Kit (Includes Items 8-10) Grease Cap 2.72"

Item

Part #

Ref #

Description

Bolt Circle

8-285-8

5/8” Stud Grease 8K

8 on 6.50

8-285-11

9/16" Stud Grease 8K

8 on 6.50

8-285-10

5/8” Stud Oil 8K

8 on 6.50

8-285-9

9/16” Stud Oil 8K

8 on 6.50

7650138

8-287-14

9/16” Stud Oil 8K

8 on 6.50

7650212

8-287-11

9/16” Stud Grease 8K

8 on 6.50

Hubs & Drums 21

Plain Hubs

HUBS COMPLETE Includes bearings, seal, cap & lug nuts. Item

Part #

Ref #

Description

Bolt Circle

7700186

21-39

11

7700018

21-43-1

Grease Cap EZ Lube 2.72"

7650155-03

8-285-95

9/16” Stud EZ Lube 8K

8 on 6.50

7700019

21-43-2

Grease Cap EZ Lube Chrome 2.72"

7650051-03

8-285-93

5/8” Stud Oil 8K

8 on 6.50

12

7700053

85-1

Rubber Plug EZ Lube

7650053-02

8-285-92

9/16” Stud Oil 8K

8 on 6.50

13

8750034

5-57

Spindle D-Washer 1" ID

14

8750006

6-191

Special Jam Nut EZ Lube (After '02)

15

8750030

6-190

Nut Retainer EZ Lube (After '02)

8750040

5-101

Tang Washer EZ Lube (Before '02)

STUDS & WHEEL NUTS

Hubs & Drums

Plain Hubs

12 1/4 x 3 3/8 BRAKES Item

Part #

Ref #

Description

22

6450113

36-115-20

Dust Shield

23

6400039

23-434

LH Electric 8K Assy

Item

Part #

Ref #

Description

6400040

23-435

RH Electric 8K Assy

16

7700036

6-53

9/16"-18 60 Deg Cone Nut

6400041

23-402

LH Hydraulic Duo-Servo 8K Assy

17

7700048

6-109

5/8"-18 90 Deg Cone Nut

6400042

23-403

RH Hydraulic Duo-Servo 8K Assy

18

7700034

6-58

5/8"-18 Flange Nut

19

7700112

7-132

9/16"-18 x 2.3 Pressed Wheel Stud**

20

7700156

7-232

5/8"-18 x 2.75 Pressed Wheel Stud**

** Stud length measured under head to end of stud.

WWW.TEXTRAIL.COM

A-45

2010 Copyright by TexTrail, Inc.


12" x 2" Electric Brake Item 1 2 3 4 5 6 7 8 9

Part # 6450135 6450136 6450228 6450248 6450226 6450007 6450099 6450307 6450038 6450001

Ref # 47-107 47-108 46-9 5-67 46-18 43-4 27-5 6-193 46-7 46-16

Qty/Brk 1 1 2 1 1 1 2 5 1 1

Description LH Actuating Arm RH Actuating Arm Retractor Spring Wing Washer for Brake Shoe Adjuster Screw Spring Adjuster Screw Assembly Magnet Wire Retaining Clip 3/8"-24 Brake Mounting Nut Washer Assembly Adjuster Plug Wire Grommet 0.437 Dia.

DXQ 6K LIGHT DUTY - 6K HEAVY DUTY

10

6400010 6400036 6450166-01

11 12 13 14 15

6450227 6450195 6450067 6450222 6450187

23-105 23-106 71-105 42-99-1 46-80 27-9 71-48 46-77 49-11

1 1 1 1 1 1 1 2 2

LH Electric Assembly RH Electric Assembly Magnet Kit 5.2-6K Oval Magnet for Dexter 12” Electric Brakes Magnet Spring Magnet Retaining Clip Shoe & Lining Kit (Includes Item 14-15) Shoe Hold Down Spring & Cup Shoe Hold Down Pin

DXQ 7K

10

6400037 6400038 6450161-01

11 12 13 14 15

6450227 6450195 6450084 6450222 6450187

23-180 23-181 71-125 42-101-1 46-80 27-9 71-127 46-77 49-11

WWW.TEXTRAIL.COM

1 1 1 1 1 1 1 2 2

LH Electric Assembly RH Electric Assembly Magnet Kit 7K Oval Magnet for Dexter 12” Electric Brakes Magnet Spring Magnet Retaining Clip Shoe & Lining Kit (Includes Item 14-15) Shoe Hold Down Spring & Cup Shoe Hold Down Pin A-46

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12” Electric BrakeBAssemblies R A K E S & Components


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B RAssemblies A K E S & Components 12� FSA Electric Brake

12" x 2" Forward Self Adjusting (FSA) Electric Brake Item

Part #

Ref #

Qty/Brk

1

6450135

47-107

1

LH Actuating Arm

6450136

47-108

1

RH Actuating Arm

2

6450228

46-9

2

Retractor Spring

3

6450248

5-67

1

Wing Washer for Brake Shoe

4

***

46-139

1

Adjuster Screw Spring

5

***

48-22

1

LH Adjuster Screw Assembly

***

48-23

1

RH Adjuster Screw Assembly

6

6450099

27-5

2

Magnet Wire Retaining Clip

7

6450307

6-193

5

3/8"-24 Brake Mounting Nut Washer Assembly

8

6450038

46-7

1

Adjuster Plug

9

6450001

46-16

1

Wire Grommet 0.437 Dia.

16

***

71-529

1

Hook for FSA Cable

17

***

71-528

1

FSA Adjuster Cable

18

***

71-530-2

1

LH Adjusting Lever

***

71-530-1

1

RH Adjusting Lever

***

46-140

1

LH FSA Lever Spring

***

46-141

1

RH FSA Lever Spring

19

WWW.TEXTRAIL.COM

A-47

Description

2010 Copyright by TexTrail, Inc.


Forward Self-Adjusting (FSA) - DXQ 6K LIGHT DUTY - 6K HEAVY DUTY

10

6400081

23-458

1

LH FSA Electric Assembly

6400082

23-459

1

RH FSA Electric Assembly

6450166-01

71-105

1

Magnet Kit

42-99-1

1

5.2-6K Oval Magnet for Dexter 12” Electric Brakes

11

6450227

46-80

1

Magnet Spring

12

6450195

27-9

1

Magnet Retaining Clip

13

6450309

71-673

1

LH Shoe & Lining Kit (Includes Item 14-15)

6450310

71-674

1

RH Shoe & Lining Kit (Includes Item 14-15)

14

6450222

46-77

2

Shoe Hold Down Spring & Cup

15

6450187

49-11

2

Shoe Hold Down Pin

Forward Self-Adjusting (FSA) - DXQ 7K

10

6400083

23-464

1

LH FSA Electric Assembly

6400084

23-465

1

RH FSA Electric Assembly

6450161-01

71-125

1

Magnet Kit

42-101-1

1

7K Oval Magnet for Dexter 12” Electric Brakes

11

6450227

46-80

1

Magnet Spring

12

6450195

27-9

1

Magnet Retaining Clip

13

6450311

71-675

1

LH Shoe & Lining Kit (Includes Item 14-15)

6450312

71-676

1

RH Shoe & Lining Kit (Includes Item 14-15)

14

6450222

46-77

2

Shoe Hold Down Spring & Cup

15

6450187

49-11

2

Shoe Hold Down Pin

*** Parts are only replaceable through purchase of FSA Electric Brake Repair Kits

12" x 2" FSA Electric Brake Service Repair Kit 6451003

71-679

FSA Brake Service Repair Kit for 1-Axle Consisting of the following:

7

***

46-139

2

Adjuster Screw Spring

8

***

48-22

1

LH Adjuster Screw Assembly

8

***

48-23

1

RH Adjuster Screw Assembly

12

***

46-140

1

LH Lever Spring

***

46-141

1

RH Lever Spring

***

71-532-1

1

LH Adjusting Lever

***

71-532-2

1

RH Adjusting Lever

14

***

71-533

1

Adjuster Cable

15

***

71-529

2

Hook for FSA Cable

13

WWW.TEXTRAIL.COM

A-48

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R A K E&S Components Continued... 12” FSA Electric Brake Assemblies


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12” FSA Electric Brake B RAssemblies A K E S & Components

12" x 2" Electric Brake with Parking Feature Item

Part #

1

Ref #

Qty/Brk

39-25

1

Description LH Pivot Pin & Cam Sub-Assembly

39-26

1

RH Pivot Pin & Cam Sub-Assembly

39-48

1

LH Actuating Cam

39-49

1

RH Actuating Cam

46-5

1

Retractor Spring

2

6450226

46-18

1

Adjuster Screw Spring

3

6450007

43-4

1

Adjuster Screw Assembly

4

6450166-01

71-105

1

Magnet Kit

42-99-1

1

5.2-6K Oval Magnet for Dexter 12” Electric Brakes

5

6450195

27-9

1

Magnet Retaining Clip

6

6450227

46-80

1

Magnet Spring

7

6450135

47-107

1

LH Actuating Arm

6450136

47-108

1

RH Actuating Arm

8

6450099

27-5

2

Magnet Wire Retaining Clip

9

6450307

6-193

5

3/8"-24 Brake Mounting Nut Washer Assembly

10

6450038

46-7

1

Adjuster Plug

11

6450001

46-16

1

Wire Grommet 0.437 Dia.

12

9000143

6-11

1

Pivot Pin Locknut

5-41

1

Washer Plain 0.312 x 0.75 x 0.065

47-70

1

Actuating Lever

6-47

1

Anchor Post Locknut

38-68

1

Anchor Post & Bushing Assembly

Ref #

Qty/Brk

23-112

1

LH Electric Assembly

23-113

1

RH Electric Assembly

13 14

9000139

15

DXQ 5.2K - 6K Item

Part #

Description

16

6450067

71-48

1

Shoe & Lining Kit (Includes Item 20-21)

17

6450222

46-77

2

Shoe Hold Down Spring & Cup

18

6450187

49-11

2

Shoe Hold Down Pin

Item

Part #

Ref #

Qty/Brk

6K Description

23-328

1

LH Electric Assembly

23-329

1

RH Electric Assembly

16

6450084

71-127

1

Shoe & Lining Kit (Includes Item 20-21)

17

6450222

46-77

2

Shoe Hold Down Spring & Cup

18

6450187

49-11

2

Shoe Hold Down Pin

WWW.TEXTRAIL.COM

A-49

2010 Copyright by TexTrail, Inc.


12" x 2" Hydraulic Brake Item

Part #

Ref #

1

6450249

46-101

2

6451004

5-113

3

6450229

46-102

4

43-29

5

6450256

54-60

6

6450107

54-62

6450108

54-63

6450250

54-64

6450251

54-65

8

6450308

6-193

9

6450038

46-7

10

6451005

87-1

7

Qty/ Description Brk 1 Retractor Spring 1 Anchor Post Washer 1 Adjusting Screw Spring 1 Adjuster Assembly 1 / 2 Cylinder Push Rod US (1) DS (2) 1 LH Duo-Servo Wheel Cylinder 1 RH Duo-Servo Wheel Cylinder 1 LH Uni-Servo Wheel Cylinder 1 RH Uni-Servo Wheel Cylinder 5 3/8"-24 Brake Mounting Nut & Washer Assembly 1 Adjuster Slot Plug 2 Sems (screw & washer assembly) 5/16"-18 x 0.62

6K Light Duty 6400068

23-322

1

6400097

23-323

1

6400046

23-324

1

6400047

23-325

1

11

6450052

71-268

1

12

6450222

46-77

1

49-12

1

13

LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin

6K - 7K

11 12 13

6400071

23-336

1

6400072

23-337

1

6400066

23-338

1

6400067

23-339

1

6450071

71-269

1

6450070

71-270

1

6450222

46-77

1

49-12

1

WWW.TEXTRAIL.COM

LH Duo-Servo Hydraulic Brake Assembly RH Duo-Servo Hydraulic Brake Assembly LH Uni-Servo Hydraulic Brake Assembly RH Uni-Servo Hydraulic Brake Assembly LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Down Spring & Cup Shoe Hold Down Pin A-50

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12� Hydraulic Brake B RAssemblies A K E S & Components


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12” HFB Brake Assemblies & Components B R A12” K EHFB S with Park Brake Assemblies & Components

12" x 2" Hydraulic Free Backing Brake Item

Qty/ Description Brk

Part #

Ref #

6400008

23-342

1

LH HFB Brake Assembly

6400009

23-343

1

RH HFB Brake Assembly

1

12" x 2" Hydraulic Free Backing Brake with Parking Feature Item

Part #

Ref #

Qty/ Brk

6400073

23-340

1

LH HFBP Brake Assembly

6400101

46-107-1

1

Shoe Lever Return Spring

1

Description

23-341

1

RH HFBP Brake Assembly

46-107-1

1

Shoe Lever Return Spring

46-101

1

Retractor Spring

2

6450249

46-101

1

Retractor Spring

2

6450249

3

9000143

6-11

1

5/16"-18 Lock Nut

3

9000143

6-11

1

5/16"-18 Lock Nut

4

6450053

71-394

1

LH Shoe & Lining Kit

6450083

71-395

1

RH Shoe & Lining Kit

5

6450222

46-77

1

Shoe Hold Down Spring & Cup Secondary

6450186

49-2

1

Shoe Hold Down Pin - Secondary

49-13

1

Shoe Hold Down Pin - Primary

46-6

1

Shoe Hold Down Spring - Primary

35-1

2

Shoe Hold Down Cup - Primary

46-123

1

Adjusting Screw Spring

6450053

71-394

1

LH Shoe & Lining Kit

6450083

71-395

1

RH Shoe & Lining Kit

5

6450222

46-77

1

Shoe Hold Down Spring & Cup Secondary

6

6450186

1

Shoe Hold Down Pin - Secondary

6

49-2 49-13

1

Shoe Hold Down Pin - Primary

7

4

7

46-6

1

Shoe Hold Down Spring - Primary

8

35-1

2

Shoe Hold Down Cup - Primary

9

43-28

1

Adjuster Assembly

46-123

1

Adjusting Screw Spring

10

47-119-1

1

Strut for Parking Brake

10

43-28

1

Adjuster Assembly

11

37-69-2

1

Travel Link Zinc

11

37-69-2

1

Travel Link Zinc

12

40-244-1

1

Shoe Lever

12

40-244-1

1

Shoe Lever

13

69-55

1

Retainer Horseshoe Park Lever

13

7-210

1

Screw

14

5-112

1

Washer 3/8" x 0.013

5-64

1

Washer 0.382 x 1.28 x 0.1196 Zinc Plated

15

7-210

1

Screw

16

5-64

1

Washer 0.382 x 1.28 x 0.1196 Zinc Plated

46-108-1

1

Primary Shoe Return Spring

47-110-1

1

LH Parking Lever and Pin

47-111-1

1

RH Parking Lever and Pin

8

9

6450286

14 15

6451007

46-108-1

1

Primary Shoe Return Spring

16

6450308

6-193

5

3/8"-24 Brake Mounting Nut & Washer Assembly

17

6450256

54-60

1

Cylinder Push Rod

18

6450250

54-64

1

LH Uni-Servo Wheel Cylinder

6450251

54-65

1

RH Uni-Servo Wheel Cylinder

19

6451005

87-1

2

Sems (screw & washer assembly) 5/16"-18 x 0.62

20

6450038

46-7

1

Adjuster Slot Plug

DEMCO 12” HFB Marine Brakes 6400086 6400085

SB42029 SB42028

1 1

LH Hydraulic Brake AssemblyGalvanized

17

6450190

6451007

18

19

6450308

6-193

5

3/8"-24 Brake Mounting Nut & Washer Assembly

20

6450256

54-60

1

Cylinder Push Rod

21

6450250

54-64

1

LH Uni-Servo Wheel Cylinder

6450251

54-65

1

RH Uni-Servo Wheel Cylinder

6451005

87-1

2

Sems (screw & washer assembly) 5/16"-18 x 0.62

6450038

46-7

1

Adjuster Slot Plug

6450082

71-515

1

Park Brake Cable

22 23

RH Hydraulic Brake AssemblyGalvanized

WWW.TEXTRAIL.COM

6450286

A-51

2010 Copyright by TexTrail, Inc.


12" x 2" Hydraulic Brake with Parking Feature Item

Part #

Ref #

Qty/Brk

1

6450249

46-101

1

Retractor Spring

5-113

1

Anchor Post Washer

2

Description

46-102

1

Adjusting Screw Spring

4

43-29

1

Adjuster Assembly

5

46-103

1

Parking Strut Spring

6

47-109

1

Parking Strut

69-55

1

Retainer Horseshoe Park Lever

5-112

1

Washer 3/8" x 0.013

3

7

6450229

6450190

8

Cylinder Push Rod US (1) DS (2)

9

6450256

54-60

1/2

10

6450107

54-62

1

LH Duo-Servo Wheel Cylinder

6450108

54-63

1

RH Duo-Servo Wheel Cylinder

6450250

54-64

1

LH Uni-Servo Wheel Cylinder

54-65

1

RH Uni-Servo Wheel Cylinder

47-110-1

1

LH Parking Lever and Pin

11

6450251 12

47-111-1

1

RH Parking Lever and Pin

13

6450308

6-193

5

3/8"-24 Brake Mounting Nut & Washer Assembly

14

6451005

87-1

2

Sems (screw & washer assembly) 5/16"-18 x 0.62

15

6450038

46-7

1

Adjuster Slot Plug

6450082

71-515

1

Park Brake Cable

23-318

1

LH Duo-Servo Hydraulic Brake Assembly

23-319

1

RH Duo-Servo Hydraulic Brake Assembly

23-320

1

LH Uni-Servo Hydraulic Brake Assembly

23-321

1

RH Uni-Servo Hydraulic Brake Assembly

6K Light Duty

16

6450052

71-268

1

Shoe & Lining Kit

17

6450222

46-77

1

Shoe Hold Down Spring & Cup

49-12

1

Shoe Hold Down Pin

23-332

1

LH Duo-Servo Hydraulic Brake Assembly

18

6K - 7K

16 17 18

23-333

1

RH Duo-Servo Hydraulic Brake Assembly

6400069

23-334

1

LH Uni-Servo Hydraulic Brake Assembly

6400070

23-335

1

RH Uni-Servo Hydraulic Brake Assembly

6450071

71-269

1

LH Shoe & Lining Kit

6450070

71-270

1

RH Shoe & Lining Kit

6450222

46-77

1

Shoe Hold Down Spring & Cup

49-12

1

Shoe Hold Down Pin

WWW.TEXTRAIL.COM

A-52

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12� Hydraulic Park Brake B R AAssemblies K E S & Components


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 6,000 lb Integral Disc & Components B Brake R A KAssemblies ES

Rotary Style 12" Integral

6 on 5.5" Bolt Pattern 1/2" Bolts

Fits all 5-Bolt Brake Flange with #42 Spindle

REPLACEMENT PARTS Ref # Description

Item

Part #

1

6450558

DBCMHGB

Stainless Steel Guide Bolt M11 x 1.5

2

6450556

DBCMHBS

3

6450560

4 5

Ref #

Kits contain parts for one complete axle

MOUNTING HARDWARE Description

Item

Part #

Stainless Steel Sleeve

16

7700073

10-36

Double Lip Seal 3.376" OD x 2.250" ID

DBCMHBSB

Rubber Bushing for Guide Bolt

17

7800026

25580

Inner Bearing Cone

6450552

DBCFIFMP90

Adapter Port 90 deg 1/8" NPT to 3/16" FIF

18

7800054

25520

Inner Bearing Cup

6450553

DBCNPTADPBBS

Bleed Port / Screw Assy (Contains Next 2 Items)

19

7800027

15123

Outer Bearing Cup

6451000

DBCNPTBBS

Bleed Screw Port 1/4"-28

20

7800055

15245

Outer Bearing Cone

6451001

DBCNPTADP

Bleed Screw Adapter 1/8"

21

8750033

5-23

Spindle D-Washer

22

8750005

6-1

Spindle Nut

Caliper E-Coat

23

8750003

19-2

Cotter Pin

Caliper Silver Cadmium Plated

24

7700027

21-1

Grease Cap

Caliper Stainless Steel

25

7700016

21-1-1

Grease Cap EZ Lube

2-1/4" Stainless Steel Piston

26

7700053

85-1

Rubber Plug EZ Lube

27

6450565

LB169

½ -20 x 1.69 Pressed Wheel Stud

Caliper comes w/ items 1-9 6

For 15" & Larger Wheels

Item 16-17 & 20-27 Not Included in Kits Below

6450527

DBC225E

6450528

DBC225SCAD

6450529

DBC225SS

7

6450548

DBC225PISTONSS

8

6450550

DBC225SEAL

Piston Rubber Seal

9

6450551

DBC225BOOT

Rubber Dust Boot

7700109

7-122

½ -20 x 1.84" Long Pressed Wheel Stud

10

6450615

CMB12U

Caliper Mounting Bracket E-Coat

6450739

LB20

½ -20 x 2" Long Pressed Wheel Stud

6450616

CMB12USCAD

Caliper Mounting Bracket SCD

7700142

7-262

½ -20 x 2.50" Long Pressed Wheel Stud

6450630

DBC225SMPAD

Brake Pads (Semi-Metallic)

7700176

6-201

½ -20 60 Deg Cone Nut Standard Torq-N-GoTM

6450620

DBC225CERMPAD

Brake Pads (Ceramic)

7700045

6-80

½ -20 60 Deg Cone Nut

6450603

ROTORHUB12

655 12" Rotor/Hub Standard Automotive Finish

7700175

6-200

½ -20 60 Deg Cone Nut Capped Torq-N-GoTM

6450604

ROTORHUB12E

655 12" Rotor/Hub E-Coat

7700043

6-98

½ -20 60 Deg Cone Nut Stainless Capped

6450605

ROTORHUB12SCAD

11 12

28

655 12" Rotor/Hub Silver Cadmium Plated

MOUNTING HARDWARE

ROTOR ONLY KITS

Not Included in Kits Below

Includes Items 1 thru 12

Item

Part #

Ref #

Description

Part #

Ref #

13

6450240

7-112

3/8"-24 x 0.88" Grade 5 Bolt

Item

6450583

2HRCM12-K

Axle Kit, STD Rotor, E-Coat Caliper

14

6450182

6-10

3/8-24" Grade 5 Nut

6450584

2HRCM12E-K

Axle Kit, E-Coat

15

9000250

33621

3/8"-24 Lock Washer

6450585

2HRCM12ESCAD-K

6450586

DBI-6K-MAXX

Axle Kit, MAXX Rotor and Caliper

6450587

DBI-6K-MAXX-SS

Axle Kit, MAXX Rotor, SS Caliper

For Salt Water applications it is recommended the use of Stainless Steel Hardware

6450586

6450584

WWW.TEXTRAIL.COM

Description

Axle Kit, E-Coat, SCAD Caliper

6450587

A-53

2010 Copyright by TexTrail, Inc.


Rotary Style 12" Slip -On

6 on 5.5" Bolt Pattern

Fits all 5-Bolt Brake Flange with #42 Spindle

6450577

6450579

WWW.TEXTRAIL.COM

Kits contain parts for one complete axle

For 15" & Larger Wheels

REPLACEMENT PARTS Item Part # Ref # Description 1 DBCMHGB 6450558 Stainless Steel Guide Bolt M11 x 1.5 2 DBCMHBS 6450556 Stainless Steel Sleeve 3 DBCMHBSB 6450560 Rubber Bushing for Guide Bolt 4 DBCFIFMP90 6450552 Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 5 DBCNPTADPBBS 6450553 Items) DBCNPTBBS 6451000 Bleed Screw Port 1/4"-28 DBCNPTADP 6451001 Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 6 DBC225E 6450527 Caliper E-Coat DBC225SCAD 6450528 Caliper Silver Cadmium Plated DBC225SS 6450529 Caliper Stainless Steel 7 6450548 DBC225PISTONSS 2-1/4" Stainless Steel Piston 8 DBC225SEAL 6450550 Piston Rubber Seal 9 DBC225BOOT 6450551 Rubber Dust Boot 10 CMB12U 6450615 Caliper Mounting Bracket E-Coat CMB12USCAD 6450616 Caliper Mounting Bracket SCD CMB12USS 6450617 Caliper Mounting Bracket SS 11 DBC225SMPAD 6450630 Brake Pads (Semi-Metallic) DBC225CERMPAD 6450620 Brake Pads (Ceramic) 12 ROTOR12 6450598 655 12" Rotor Standard Automotive Finish ROTOR12E 6450599 655 12" Rotor E-Coat ROTOR12SCAD 6450600 655 12" Rotor Silver Cadmium Plated ROTOR12SS 6450601 655 12" Rotor Stainless Steel

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 6,000 lb Slip-On Disc Assemblies BBrake RAK E S & Components

MOUNTING HARDWARE Not Included in Kits Below Item Part # Ref # Description 13 7-112 6450240 3/8"-24 x 0.88" Grade 5 Bolt 14 6-10 6450182 3/8-24" Grade 5 Nut 15 33621 9000250 3/8"-24 Lock Washer For Salt Water applications it is recommended the use of Stainless Steel Hardware

Item

Part # 6450576 6450577 6450578 6450579 6450580 6450581

ROTOR ONLY KITS Includes Items 1 thru 12 Ref # Description 2RCM12-K Axle Kit, STD Rotor, E-Coat Caliper 2RCM12E-K Axle Kit, E-Coat 2RCM12ESCAD-K Axle Kit, E-Coat, SCAD Caliper DBSO-6K-MAXX Axle Kit, MAXX Rotor and Caliper DBSO-6K-MAXX-SS Axle Kit, MAXX Rotor, SS Caliper DBSO-6K-SS Axle Kit, Stainless Steel

6450581

A-54

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7,000 lb Integral DiscB Brake R AAssemblies K E S & Components

6450680

Rotary Style 13" Integral Item 1 2 3 4 5

Part # 6450558 6450556 6450560 6450552 6450553 6451000 6451001

6

7 8 9 10

11

12

6450705 6450706 6450707 6450818 6450819 6450820 6450821 6450709 6450712

6450677

Fits all 5-Bolt Brake Flange with #42 Spindle

For 16" & Larger Wheels

REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 Ref #

Item

Part #

16 17 18 19 20

7700073 7800026 7800054 7800017 7800056

Bleed Screw Adapter 1/8"

21

8750033

Caliper comes w/ items 1-9 DBC250E Caliper E-Coat DBC250SCAD Caliper Silver Cadmium Plated DBC250SS Caliper Stainless Steel DBC250PISTONSCAD 2-1/2" Silver Cadmium Plated Piston DBC250PISTONSS 2-1/2" Stainless Steel Piston DBC250SEAL Piston Rubber Seal DBC250BOOT Rubber Dust Boot CMB1337 Caliper Mounting Bracket E-Coat CMB1337SCAD Caliper Mounting Bracket Silver Cadmium Plated

22 23 24 25 26 27

8750005 8750003 7700186 7700018 7700053 7700109 6450739 7700142 6450835 7700123

28

7700176

DBCNPTADP

CMB1337SS

6450811

DBC250SMPAD

6450810 6450700 6450701 6450702

ROTORHUB13378E

Caliper Mounting Bracket Stainless Steel Brake Pads (Semi-Metallic)

7700045

DBC250CERMPAD

Brake Pads (Ceramic)

7700175

ROTORHUB13378

7700043 7700036

6450783

ROTORHUB13389

6450784 6450785 6450788

ROTORHUB13389E ROTORHUB13389SCAD ROTORHUB133810

1/2" 856 13" Rotor/Hub Standard Automotive Finish 1/2" 865 13" Rotor/Hub E-Coat 1/2" 865 13" Rotor/Hub Silver Cadmium Plated 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 865 13" Rotor/Hub E-Coat 9/16" 865 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish

6450789

ROTORHUB133810E

6450790

ROTORHUB133810SCAD

Part #

13

6450240

15

8 on 6.5" Bolt Pattern

6450713

Item

14

6450690

6450182

ROTORHUB13378SCAD

6-10

Mounting Hardware Ref # Description Item 16-17 & 20-27 Not Included in Kits Below 10-36 Double Lip Seal 3.376" OD x 2.250" ID 25580 Inner Bearing Cone 25520 Inner Bearing Cup 14125A Outer Bearing Cup 14276 Outer Bearing Cone 5-23

Spindle D-Washer

Spindle Nut Cotter Pin 21-39 Grease Cap 21-43-1 Grease Cap EZ Lube 85-1 Rubber Plug EZ Lube 7-122 ½ -20 x 1.84" Long Pressed Wheel Stud LB20 ½ -20 x 2" Long Pressed Wheel Stud 7-262 ½ -20 x 2.50" Long Pressed Wheel Stud LB25 9/16"-18 x 2.5" Pressed Wheel Stud 7-223 9/16"-18 x 2" Pressed Wheel Stud ½ -20 60 Deg Cone Nut Standard Torq-N6-201 GoTM 6-80 ½ -20 60 Deg Cone Nut ½ -20 60 Deg Cone Nut Capped Torq-N6-200 GoTM 6-98 ½ -20 60 Deg Cone Nut Stainless Capped 6-53 9/16"-18 60 Deg Cone Nut 1/2" Rotor Only Kits 6-1

19-2

Includes Items 1 thru 12 Part # 6450674 6450675

2HRCM13378E-K

Description Axle Kit, STD Rotor, E-Coat Caliper Axle Kit, E-Coat

5/8" 865 13" Rotor/Hub E-Coat

6450676

DBI-7K-MAXX

Axle Kit, MAXX Rotor and Caliper

5/8" 865 13" Rotor/Hub Silver Cadmium Plated

6450677

DBI-7K-MAXX-SS

Axle Kit, MAXX Rotor, SS Caliper

Part # 6450679 6450680

9/16" Rotor Only Kits Includes Items 1 thru 12 Ref # Description 2HRCM13379-K Axle Kit, STD Rotor, E-Coat Caliper 2HRCM13379E-K Axle Kit, E-Coat

6450681

2HRCM13379SCAD-K

Axle Kit, SCAD

6450682

2HRCM13379SCADSS-K

Axle Kit, SCAD Rotor, SS Caliper

Mounting Hardware Not Included in Kits Below Ref # Description 7-112

Kits contain parts for one complete axle

Item

Item

3/8"-24 x 0.88" Grade 5 Bolt 3/8-24" Grade 5 Nut

9000250 33621 3/8"-24 Lock Washer For Salt Water applications it is recommended the use of Stainless Steel Hardware Item

WWW.TEXTRAIL.COM

A-55

Ref # 2HRCM13378-K

Part # 6450688 6450689

5/8" Rotor Only Kits Includes Items 1 thru 12 Ref # Description 2HRCM133710-K Axle Kit, STD Rotor, E-Coat Caliper 2HRCM133710E-K Axle Kit, E-Coat

6450690

2HRCM133710SCAD-K

Axle Kit, SCAD

2010 Copyright by TexTrail, Inc.


Rotary Style 13" Slip -On Item

Part #

1

6450558

2

6450556

3

6450560

4

6450552

5

6450553 6451000 6451001

8 on 65" Bolt Pattern

Fits all 4-Bolt Brake Flange with #42 Spindle

For 16" & Larger Wheels

REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Ref #

6450705

DBC250E

6450706

DBC250SCAD

6450707

DBC250SS

For Salt Water applications it is recommended the use of Stainless Steel Hardware

Rotor Only Kits

6450818

Caliper E-Coat Caliper Silver Cadmium Plated

Includes Items 1 thru 12 Part #

Ref #

Caliper Stainless Steel

6450655

2RCM13378-K

DBC250PISTONSCAD

2-1/2" Silver Cadmium Plated Piston

6450656

2RCM13378E-K

6450819

DBC250PISTONSS

2-1/2" Stainless Steel Piston

6450657

DBSO-7K-MAXX

8

6450820

DBC250SEAL

Piston Rubber Seal

6450658

DBSO-7K-MAXX-SS

9

6450821

DBC250BOOT

Rubber Dust Boot

6450659

DBSO-7K-SS

10

6450710

CMB13372D

Caliper Mounting Bracket E-Coat

6450660

2RCM13379-K

11

6450811

DBC250SMPAD

2RCM13379E-K

DBC250CERMPAD

Brake Pads (Semi-Metallic) Brake Pads (Ceramic)

6450661

6450810

6450662

2RCM13379SCAD-K

6450695

ROTOR13378

1/2" 865 13" Rotor Standard Automotive Finish

6450663

2RCM13379SCADSS-K

6450696

ROTOR13378E

2RCM13379SS-K

6450697 6450698

ROTOR13378SS

6450774

ROTOR13389

1/2" 865 13" Rotor E-Coat 1/2" 865 13" Rotor Silver Cadmium Plated 1/2" 865 13" Rotor Stainless Steel 9/16" 865 13" Rotor Standard Automotive Finish 9/16" 865 13" Rotor E-Coat 9/16" 865 13" Rotor Silver Cadmium Plated 9/16" 865 13" Rotor Stainless Steel

6450664

ROTOR13378SCAD

7

12

6450775

ROTOR13378E

6450776

ROTOR13378SCAD

6450777

ROTOR13378SS

6450661

WWW.TEXTRAIL.COM

Kits contain parts for one complete axle

Mounting Hardware Not Included in Kits Below Item Part # Ref # Description 7-271 13 6450307 7/16"-20 x 1-3/16" Grade 5 Bolt 5-8 14 7030116 7/16" Lock Washer 6-17 15 6450181 7/16"-20 Nut

Caliper comes w/ items 1-9 6

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7,000 lb Slip-On Disc & Components B Brake R A KAssemblies ES

Item

6450657

6450658

A-56

Description 1/2" Axle Kit, STD Rotor, E-Coat Caliper 1/2" Axle Kit, E-Coat

1/2" Axle Kit, MAXX Rotor and Caliper 1/2" Axle Kit, MAXX Rotor, SS Caliper 1/2" Axle Kit, SS 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, SS

6450659

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B R AAssemblies KES 12-1/4” 7.2K Electric Brake & Components

12 1/4" x 2 1/2" 7.2K Electric Brake* Item

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Qty/ Description Brk 6400057 23-428 1 LH Electric Assembly 6400058 23-429 1 RH Electric Assembly 6450160-01 71-441 1 Magnet Kit 42-136 1 7.2K Oval Magnet for Dexter 12 1/4” Electric Brakes 6450232 46-117 1 Magnet Spring 6450194 27-50 1 Magnet Retaining Clip 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 5-142 1 1/2" Plain Type B Anchor Post Washer 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 6450137 47-124-1 1 LH Actuating Arm 6450138 47-125-1 1 RH Actuating Arm 6450102 27-39 3 Magnet Wire Retaining Clip 6450226 46-18 1 Adjuster Screw Spring 6450009 48-17 1 Adjuster Assembly 6450289 71-497 1 LH Shoe & Lining Kit 6450290 71-496 1 RH Shoe & Lining Kit 6450237 46-119 1 Return Spring 6450097 46-136 2 Centering Spring 7-251 4 1/2"-20 x 1.5" Brake Mounting Bolt Grade 5 6450300 36-118-20 1 Dust Shield 6450001 46-16 1 Wire Grommet 0.437 Dia. 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 6450038 46-7 2 Adjuster Plug * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative. Part #

Ref #

WWW.TEXTRAIL.COM

A-57

2010 Copyright by TexTrail, Inc.


6450691

6450683

Rotary Style 13” Slip -On

8 on 65” Bolt Pattern

Fits all 4-Bolt Brake Flange with #42 Spindle

For 16” & Larger Wheels

6450707

REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8" Caliper comes w/ items 1-9 DBC250E Caliper E-Coat DBC250SCAD Caliper Silver Cadmium Plated DBC250SS Caliper Stainless Steel

6450818

DBC250PISTONSCAD

7

6450819

DBC250PISTONSS

8

6450820

DBC250SEAL

Item

Part #

1

6450558

2

6450556

3

6450560

4

6450552

5

6450553 6451000 6451001

6

6450705 6450706

Ref #

6450783

ROTORHUB13389

6450784

ROTORHUB13389E

6450785

ROTORHUB13389SCAD

6450788

ROTORHUB133810

6450789

ROTORHUB133810E

6450790

ROTORHUB133810SCAD

5/8" 865 13" Rotor/Hub Silver Cadmium Plated

9

6450821

DBC250BOOT

6450710

CMB13372D

11

6450811

DBC250SMPAD

6450810

DBC250CERMPAD

Item

2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 865 13" Rotor/Hub E-Coat 9/16" 865 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 865 13" Rotor/Hub E-Coat

10

12

Part #

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & RAK ES 7,200 lb Integral DiscBBrake Assemblies & Components

Not Included in Kits Below Ref # Description 7-271 7/16"-20 x 1-3/16" Grade 5 Bolt 5-8 7/16" Lock Washer 6-17 7/16"-20 Nut

Kits contain parts for one complete axle

24

Mounting Hardware Part # Ref # Description Item 16-17 & 20-27 Not Included in Kits Below 10-36 7700073 Double Lip Seal 3.376" OD x 2.250" ID 10-63 7700088 Unitized Seal 3.376" OD x 2.250" ID 25580 7800026 Inner Bearing Cone 25520 7800054 Inner Bearing Cup 02475 7800028 Outer Bearing Cup 02420 7800057 Outer Bearing Cone 5-57 8750034 Spindle D-Washer 6-1 8750005 Spindle Nut 19-2 8750003 Cotter Pin 21-39 7700186 Grease Cap 2.72"

25

7700018

21-43-1

Grease Cap EZ Lube 2.72"

7700019

21-43-2

26

7700053

85-1

30

7700029-01

27

7700055

10-45

28

7700029

21-35

29

7700052

46-32

7700051

46-52

6450835

LB25

Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Oil Cap Kit (Includes Items 27 - 29) O-ring (865) Oil Cap (865) Oil Cap Plug Oil Fill Hole Plug 9/16-18 x 2.5" Pressed Wheel Stud

7700123

7-223

9/16"-18 x 2.01" Pressed Wheel Stud

6450741

LB3165

5/8"-18 x 3.165" Pressed Wheel Stud

7700145

7-224

5/8"-18 x 2.50" Pressed Wheel Stud

7700036

6-53

9/16"-18 60 Deg Cone Nut Zinc Plated

7700048

6-109

7700034

6-58

5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut

Item 16 17 18 19 20 21 22 23

31

32

Rotor Only Kits Includes Items 1 thru 12 Ref # 15 6450181 Item Part # Description 9/16" Axle Kit, STD Rotor, E-Coat 2HRCM133729-K For Salt Water applications it is recommended the use of Stainless Steel Hardware 6450683 Caliper 2HRCM133729E-K 6450684 9/16" Axle Kit, E-Coat Caliper 5/8" Axle Kit, STD Rotor, E-Coat 2HRCM1337210-K 6450691 Caliper Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty. 13

6450307

14

7030116

WWW.TEXTRAIL.COM

A-58

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 7,200 lb Slip-On DiscBBrake Assemblies & Components RAK ES

Rotary Style 8 on 65” Bolt 13” Slip -On Pattern

Fits all 4-Bolt Brake Flange with #42 Spindle

For 16” & Larger Wheels

REPLACEMENT PARTS Item

Part #

Ref #

1

6450558

DBCMHGB

2

6450556

DBCMHBS

3

6450560

DBCMHBSB

4

6450552

DBCFIFMP90

5

Mounting Hardware

Description

Not Included in Kits Below

Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 Items) Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8"

6450553

DBCNPTADPBBS

6451000

DBCNPTBBS

6451001

DBCNPTADP

6450705

DBC250E

6450706

DBC250SCAD

6450707

DBC250SS

6450818

DBC250PISTONSCAD

6450819

DBC250PISTONSS

Item

Part #

Ref #

Description

13

6450307

7-271

14

7030116

5-8

15

6450181

6-17

7/16"-20 x 1-3/16" Grade 5 Bolt 7/16" Lock Washer 7/16"-20 Nut

For Salt Water applications it is recommended the use of Stainless Steel Hardware

Caliper comes w/ items 1-9 6

7

Caliper E-Coat Caliper Silver Cadmium Plated

8

6450820

DBC250SEAL

9

6450821

DBC250BOOT

10

6450710

CMB13372D

11

6450811

DBC250SMPAD

6450810

DBC250CERMPAD

12

6450774

ROTOR13389

6450775

ROTOR13389E

6450776

ROTOR13389SCAD

6450777

ROTOR13389SS

6450778

ROTOR133810

6450779

ROTOR133810E

6450780

ROTOR133810SCAD

6450781

ROTOR133810SS

Item

Part #

Caliper Stainless Steel

6450665

2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot Caliper Mounting Bracket E-Coat Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 865 13" Rotor Standard Automotive Finish 9/16" 865 13" Rotor E-Coat 9/16" 865 13" Rotor Silver Cadmium Plated 9/16" 865 13" Rotor Stainless Steel 5/8" 865 13" Rotor Standard Automotive Finish 5/8" 865 13" Rotor E-Coat 5/8" 865 13" Rotor Silver Cadmium Plated 5/8" 865 13" Rotor Stainless Steel

6450666

6450665

WWW.TEXTRAIL.COM

Kits contain parts for one complete axle

6450671 6450672

Rotor Only Kits Includes Items 1 thru 12 Ref # Description 9/16" Axle Kit, STD Rotor, E-Coat 2RCM133729-K Caliper 2RCM133729E-K 9/16" Axle Kit, E-Coat 2RCM1337210-K 5/8" Axle Kit, STD Rotor, E-Coat Caliper 2RCM1337210E-K 5/8" Axle Kit, E-Coat

6450671

A-59

2010 Copyright by TexTrail, Inc.


12 1/4" x 3 3/8" 8K Electric Manual Adjust Brake* Item Part # Ref # Qty/Brk Description 23-432 1 LH Electric Assembly 23-433 1 RH Electric Assembly 1 6450173-01 71-375 1 Magnet Kit 42-127 1 8K Oval Magnet for Dexter 12.25” Electric Brakes 2 6450194 27-50 1 Magnet Retaining Clip 3 6450232 46-117 1 Magnet Spring 4 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 5 5-142 1 Washer Plain 1/2" Type B 6 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 7 47-123-18 1 LH Actuating Arm Assembly 47-123-17 1 RH Actuating Arm Assembly 8 6450102 27-39 3 Magnet Wire Retaining Clip 9 6450237 46-119 1 Return Spring 10 6450226 46-18 1 Adjuster Spring 11 6450101 46-133 1 Adjuster Clip - Barrel End 12 6450009 46-17 1 Adjuster Assembly 13 6450100 46-132 1 Adjuster Clip - Thread End 14 6450059 71-499 1 LH Shoe & Lining Kit 6450060 71-498 1 RH Shoe & Lining Kit 15 6450097 46-136 2 Centering Spring 16 6450019 7-97 4 1/2"-20 x 1.75" Brake Mounting Hex Head Bolt Gr-5 17 6450113 36-115-20 1 Dust Shield 18 6450038 46-7 2 Adjuster Plug 19 5-58 4 1/2" X 0.125 Brake Mounting Lock Washer 20 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 21 6450001 46-16 1 Wire Grommet 0.437 Dia. * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative. WWW.TEXTRAIL.COM

A-60

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12-1/4” 8K Electric Brake & Components B R AAssemblies KES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12 1/4” x 3 3/8” 8K Forward Electric Brake* B R ASelf-Adjusting KES

12 1/4" x 3 3/8" 8K Forward Self-Adjusting Electric Brake* Item Part # Ref # Qty/Brk Description 6400039 23-434 1 LH FSA Electric Assembly 6400040 23-435 1 RH FSA Electric Assembly 1 6450275 46-137 1 Adjuster Spring 2 6450146 71-464 1 LH Adjuster Lever 6450150 71-463 1 RH Adjuster Lever 3 6450088 71-462 1 Adjuster Cable 10" 4 6450173-01 71-375 1 Magnet Kit 42-127 1 8K Oval Magnet for Dexter 12.25” Electric Brakes 5 6450232 46-117 1 Magnet Spring 6 6450194 27-50 1 Magnet Retaining Clip 7 6450177 6-92-1 1 7/16"-20 Anchor Post Flange Nut 8 6450211 71-455-1 1 LH Lever Arm Retainer 6450212 71-455-2 1 RH Lever Arm Retainer 9 6450102 27-39 3 Magnet Wire Retaining Clip 10 6450271 47-123-38 1 LH Actuating Arm 6450270 47-123-37 1 RH Actuating Arm 11 6450237 46-119 1 Return Spring 12 6450101 46-133 1 Adjuster Clip - Barrel End 13 6450011 48-19 1 LH Adjuster Assembly (Silver) 6450010 48-20 1 RH Adjuster Assembly (Gold) 14 6450100 46-132 1 Adjuster Clip - Thread End 15 6450059 71-499 1 LH Shoe & Lining Kit 6450060 71-498 1 RH Shoe & Lining Kit 16 6450097 46-136 2 Centering Spring 17 6450019 7-97 4 1/2"-20 x 1.75" Brake Mounting Hex Head Bolt Gr-5 18 6450113 36-115-20 1 Dust Shield 19 6450038 46-7 2 Adjuster Plug 4 1/2" X 0.125 Brake Mounting Lock Washer 20 5-58 21 6-129 4 1/2"-20 Brake Mounting Plain Hex Nut UNF 22 6450001 46-16 1 Wire Grommet 0.437 Dia. * Cast plate. For replacement parts of Stamped Backing Plate, call your sales representative. WWW.TEXTRAIL.COM

A-61

2010 Copyright by TexTrail, Inc.


12 1/4" x 3 3/8" 8K Hydraulic Duo-Servo Manual Adjust Brake Item

Part #

1 2 3 4 5

6450264

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

6450260 6450219 6450081 6450080 6450247 6450226 6450100 6450009 6450101 6050055 6450019

6450027 6450259 6450203 6450113

6450038

Ref # 23-388 23-387 69-53 5-142 34-62 46-87 71-165 71-166 6-86 5-107 46-18 46-132 48-17 46-133 97-2 24-204 7-97 97-4 36-64-3 71-80 54-33 7-113 36-115-20 5-58 6-129 46-7

WWW.TEXTRAIL.COM

Qty/Brk 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 4 1 1 1 1 2 1 4 4 2

Description LH Duo-Servo Hydraulic Assembly RH Duo-Servo Hydraulic Assembly Retainer Ring Washer Plain 1/2" Type B Piston Stop Spring Retractor LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Locknut 3/8”-16 Shoe Hold Down Washer Spring Adjuster Adjuster Clip - Thread End Adjuster Assembly Adjuster Clip - Barrel End ABS Sensor Retainer Clip ABS Sensor Mounting Block 1/2"-20 x 1.75" Hex Head Break Mounting Bolt ABS Sensor - Straight LH Spider Assembly (Includes Items 17-19) Wheel Cylinder Kit (1.00” Bore) containing: Cylinder Push Rod Shoe Hold Down Screw Dust Shield 1/2" Lock washer 1/2"-20 Brake Mounting Nut Adjuster Slot Plug A-62

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12-1/4” 8K Hydraulic Brake & Components B R AAssemblies KES


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & R A Brake K E S Assemblies & Components 12-1/4” 8K Hydraulic withBPark

12 1/4" x 3 3/8" 8K Hydraulic Uni-Servo Manual Adjust Brake with Park Feature Item

Part #

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

6450219 6450081 6450080 6450247 6450226 6450100 6450009 6450101 6450019 6450203

6450027 6450259

6450038

Ref # 23-252 23-253 7-96 5-143 5-65 46-91 47-89 47-90 39-55 39-56 33-83 46-87 71-165 71-166 6-86 5-107 46-18 46-132 48-17 46-133 7-97 7-113 36-64-8 36-64-9 69-40 71-80 54-33 36-115-24 5-58 6-129 46-7 71-512

WWW.TEXTRAIL.COM

Qty/Brk 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 4 2 1 1 1 1 1 1 4 4 2 1

Description LH Uni-Servo Hydraulic Assembly RH Uni-Servo Hydraulic Assembly Hold Down Lever Bolt Star Washer Hold Down Lever Washer Hold Down Lever Spring LH Parking Lever RH Parking Lever LH Parking Cam RH Parking Cam Spacer Spring Retractor LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Locknut 3/8”-16 Shoe Hold Down Washer Spring Adjuster Adjuster Clip - Thread End Adjuster Assembly Adjuster Clip - Barrel End 1/2"-20 x 1.75" Hex Head Break Mounting Bolt Shoe Hold Down Screw LH Spider Assembly (Includes Items 19-21) RH Spider Assembly (Includes Items 19-21) Retainer Snap Ring Wheel Cylinder Kit (1.00” Bore) containing: Cylinder Push Rod Dust Shield 1/2" Lock washer 1/2"-20 Brake Mounting Nut Adjuster Slot Plug Parking Brake Cable A-63

2010 Copyright by TexTrail, Inc.


12 1/4" x 3 3/8" 8K Hydraulic Forward Self-Adjusting Brake Item

1 2 3 4 5 6 7 8 9 10 11 12

Part #

6400041 6460042 6450013 6450014 6450146 6450150 6450088 6450264 6450280 6450291 6450260 6450219 6450100 6450011 6450010 6450101 6450081 6450080

13 14 15 16

6450247 6450019

17 18 19 20 21 22 23

6450027 6450259 6450203 6450113 9000251 9000137 6450038

Ref # 23-418 23-419 23-402 23-403 46-135 46-134 71-464 71-463 71-462 69-53 71-456 46-131-1 34-62 46-87 46-132 48-19 48-20 46-133 71-165 71-166 6-86 5-107 7-97 36-64-3 36-64-6 36-64-7 71-80 54-33 7-113 36-115-20 5-58 6-129 46-7

WWW.TEXTRAIL.COM

Qty/Brk 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 4 1 1 1 1 1/2 2 1 4 4 2

Description LH Uni-Servo FSA Hydraulic Assembly RH Uni-Servo FSA Hydraulic Assembly LH Duo-Servo FSA Hydraulic Assembly RH Duo-Servo FSA Hydraulic Assembly LH Adjuster Spring RH Adjuster Spring LH Adjuster Lever RH Adjuster Lever Adjuster Cable 10" Long Retainer Ring Cable Attachment Bracket Spring Extension Piston Stop Spring Retractor Adjuster Clip - Thread End LH Adjuster Assembly RH Adjuster Assembly Adjuster Clip - Barrel End LH Shoe & Lining Kit RH Shoe & Lining Kit Shoe Hold Locknut 3/8”-16 Shoe Hold Down Washer 1/2"-20 x 1.75" Hex Head Break Mounting Bolt Spider Assembly DS (Includes Items LH Spider Assembly US (Includes Items RH Spider Assembly US (Includes Items Wheel Cylinder Kit (1.00” Bore) Cylinder Push Rod US (1) DS (2) Shoe Hold Down Screw Dust Shield 1/2" Lock washer 1/2"-20 Brake Mounting Nut Adjuster Slot Plug A-64

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & B Brake R A KAssemblies ES 12-1/4” 8K Hydraulic FSA & Components


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 8,000 lb Integral DiscBBrake Assemblies & Components RAK ES

Rotary Style 13” Integral

8 on 6.5” Bolt Pattern 9/16” & 5/8” Bolts

Item

Part #

Ref #

1

6450558

DBCMHGB

2

6450556

DBCMHBS

3

6450560

DBCMHBSB

4

6450552

DBCFIFMP90

5

6450553

DBCNPTADPBBS

6451000

DBCNPTBBS

6451001

DBCNPTADP

Fits all 4-Bolt Brake Flange with #42 Spindle REPLACEMENT PARTS Description Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Adapter Port 90 deg 1/8" NPT to 3/16" FIF Bleed Port / Screw Assy (Contains Next 2 Items) Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8"

6450705

DBC250E

7

6450818

DBC250PISTONSCAD

6450819

DBC250PISTONSS

8

6450820

DBC250SEAL

9

6450821

DBC250BOOT

10

6450806 6450807

10

12

Item 13 14 15

Dexter Axle Caliper Mounting Brackets CMB1338DI Caliper Mounting Bracket E-Coat CMB1338DISCAD Caliper Mounting Bracket Silver Cadmium Plated

6450804 6450811

DBC250SMPAD

6450810

DBC250CERMPAD

6450774

ROTORHUB13389

6450798 6450805

11

Caliper E-Coat 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot

Other Axle Caliper Mounting Brackets CMB1338A Caliper Mounting Bracket E-Coat CMB1338ASCAD Caliper Mounting Bracket Silver Cadmium Plated CMB1338ASS Caliper Mounting Bracket Stainless Steel

6450775

ROTORHUB13389E

6450776

ROTORHUB13389SCAD

6450778

ROTORHUB133810

6450779

ROTORHUB133810E

6450780

ROTORHUB133810SCAD

Mounting Hardware Description

Item

Part #

Ref #

16

7700073

10-36

7700088

10-63

17

7800026

25580

18

7800054

25520

19

7800028

02475

20

7800057

02420

21

8750034

5-57

22

8750005

6-1

23

8750003

19-2

24

7700186

21-39

25

7700018

21-43-1

7700019

21-43-2

26

7700053

85-1

30

7700029-01

27

7700055

10-45

28

7700029

21-35

29

7700052

46-32

7700051

46-52

31

Brake Pads (Semi-Metallic) Brake Pads (Ceramic) 9/16" 856 13" Rotor/Hub Standard Automotive Finish 9/16" 856 13" Rotor/Hub E-Coat 9/16" 856 13" Rotor/Hub Silver Cadmium Plated 5/8" 856 13" Rotor/Hub Standard Automotive Finish 5/8" 856 13" Rotor/Hub E-Coat 5/8" 856 13" Rotor/Hub Silver Cadmium Plated

32

6450835

LB25

7700123

7-223

6450741

LB3165

7700145

7-224

7700036

6-53

7700048

6-109

7700034

6-58

Includes Items 1 thru 12

Ref #

Not Included in Kits Below

6450758

2HRCM1338D9-K

Description 7-97 6450019 1/2"-20 x 1-3/4" Grade 5 Bolt 12LWP 9000251 1/2" Lock Washer 9000137 6-46 1/2"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware

6450759

2HRCM1338D9E-K

Item

Ref #

Kodiak’s offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.

6450671

6450765

WWW.TEXTRAIL.COM

6450766

A-65

Description

6450760

2HRCM1338D9SCAD-K

6450761

2HRCM1338D9SCADSS-K

6450763

2HRCM1338D10-K

6450771

2HRCM1338D10E-K

6450765

2HRCM1338D10SCAD-K

6450766

2HRCM1338D10SCADSS-K

9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper

Other Axle Rotor Only Kits Includes Items 1 thru 12

Item

6450663

Double Lip Seal 3.376" OD x 2.250" ID Unitized Seal 3.376" OD x 2.250" ID Inner Bearing Cone Inner Bearing Cup Outer Bearing Cup Outer Bearing Cone Spindle D-Washer Spindle Nut Cotter Pin Grease Cap 2.72" Grease Cap EZ Lube 2.72" Grease Cap EZ Lube Chrome 2.72" Rubber Plug EZ Lube Oil Cap Kit (Includes Items 27 - 29) O-ring (865) Oil Cap (865) Oil Cap Plug Oil Fill Hole Plug 9/16-18 x 2.5" Pressed Wheel Stud 9/16"-18 x 2.01" Pressed Wheel Stud 5/8"-18 x 3.165" Pressed Wheel Stud 5/8"-18 x 2.50" Pressed Wheel Stud 9/16"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 60 Deg Cone Nut Zinc Plated 5/8"-18 Flange Nut

Dexter Axle Rotor Only Kits Part #

Part #

Kits contain parts for one complete axle

Item 16-17 & 20-27 Not Included in Kits Below

Caliper comes w/ items 1-9 6

Kits contain parts for one complete axle

Part #

Ref #

6450758-02

2HRCM1338A9-K

6450759-02

2HRCM1338A9E-K

6450760-02

2HRCM1338A9SCAD-K

6450761-02

2HRCM1338A9SCADSS-K

6450763-02

2HRCM1338A10-K

6450771-02

2HRCM1338A10E-K

6450765-02

2HRCM1338A10SCAD-K

6450766-02

2HRCM1338A10SCADSS-K

Description 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper

2010 Copyright by TexTrail, Inc.


Rotary Style 13" Slip -On Item

Part #

1

6450558

2

6450556

3

6450560

4

6450552

5

6450553 6451000 6451001

8 on 6.5" Bolt Pattern 9/16" & 5/8" Bolts

Fits all 4-Bolt Brake Flange with #42 Spindle

REPLACEMENT PARTS Description DBCMHGB Stainless Steel Guide Bolt M11 x 1.5 DBCMHBS Stainless Steel Sleeve DBCMHBSB Rubber Bushing for Guide Bolt DBCFIFMP90 Adapter Port 90 deg 1/8" NPT to 3/16" FIF DBCNPTADPBBS Bleed Port / Screw Assy (Contains Next 2 Items) DBCNPTBBS Bleed Screw Port 1/4"-28 DBCNPTADP Bleed Screw Adapter 1/8"

Mounting Hardware

Ref #

7

6450705

DBC250E

6450706

DBC250SCAD

6450707

DBC250SS

6450818

DBC250PISTONSCAD

6450819

DBC250PISTONSS

8

6450820

DBC250SEAL

9

6450821

DBC250BOOT

10

6450799

Kits contain parts for one complete axle

For 16" & Larger Wheels

Not Included in Kits Below

Item

Part #

Ref #

Description

1/2"-20 x 1-3/4" Grade 5 Bolt 1/2" Lock Washer 6-46 15 9000137 1/2"-20 Nut For Salt Water applications it is recommended the use of Stainless Steel Hardware 13

6450019

7-97

14

9000251

12LWP

Dexter Axle Rotor Only Kits

Caliper comes w/ items 1-9 6

Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 2-1/2" Silver Cadmium Plated Piston 2-1/2" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot

Includes Items 1 thru 12

Item

Dexter Axle Caliper Mounting Brackets CMB1338D Caliper Mounting Bracket E-Coat

Part #

Ref #

6450743

2RCM1338D9-K

6450744

2RCM1338D9E-K

6450745

2RCM1338D9SCAD-K

6450747

2RCM1338D9SCADSS-K

6450748

2RCM1338D9SS-K

6450750

2RCM1338D10-K

6450751

2RCM1338D10E-K

6450752

2RCM1338D10SCAD-K

6450800

CMB1338DSCAD

Caliper Mounting Bracket Silver Cadmium Plated

6450753

2RCM1338D10SCADSS-K

6450801

6450755

2RCM1338D10SS-K

6450775

Caliper Mounting Bracket Stainless Steel Other Axle Caliper Mounting Brackets CMB1338A Caliper Mounting Bracket E-Coat CMB1338ASCAD Caliper Mounting Bracket Silver Cadmium Plated CMB1338ASS Caliper Mounting Bracket Stainless Steel DBC250SMPAD Brake Pads (Semi-Metallic) DBC250CERMPAD Brake Pads (Ceramic) ROTOR13389 9/16" 865 13" Rotor Standard Automotive Finish ROTOR13389E 9/16" 865 13" Rotor E-Coat

6450776

ROTOR13389SCAD

6450777

ROTOR13389SS

6450778

ROTOR133810

6450798 6450805 6450804 11

6450811

12

6450774

6450810

CMB1338DSS

6450779

ROTOR133810E

6450780

ROTOR133810SCAD

6450781

ROTOR133810SS

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 8,000 lb Slip-On DiscBBrake Assemblies & Components RAK ES

Description 9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, Stainless Steel 5/8" Axle Kit, STD Rotor, E-Coat Caliper 5/8" Axle Kit, E-Coat 5/8" Axle Kit, SCAD 5/8" Axle Kit, SCAD Rotor, SS Caliper

5/8" Axle Kit, Stainless Steel Other Axle Rotor Only Kits Includes Items 1 thru 12

Item

Part #

Ref #

6450743-02

2RCM1338A9-K

6450744-02

2RCM1338A9E-K

Description

2RCM1338A9SS-K

9/16" Axle Kit, STD Rotor, E-Coat Caliper 9/16" Axle Kit, E-Coat 9/16" Axle Kit, SCAD 9/16" Axle Kit, SCAD Rotor, SS Caliper 9/16" Axle Kit, Stainless Steel

9/16" 865 13" Rotor Silver Cadmium Plated

6450750-02

2RCM1338A10-K

5/8" Axle Kit, STD Rotor, E-Coat Caliper

9/16" 865 13" Rotor Stainless Steel 5/8" 865 13" Rotor Standard Automotive Finish 5/8" 865 13" Rotor E-Coat 5/8" 865 13" Rotor Silver Cadmium Plated 5/8" 865 13" Rotor Stainless Steel

6450751-02

2RCM1338A10E-K

5/8" Axle Kit, E-Coat

6450752-02

2RCM1338A10SCAD-K

5/8" Axle Kit, SCAD

6450753-02

2RCM1338A10SCADSS-K

6450755-02

2RCM1338A10SS-K

6450745-02

2RCM1338A9SCAD-K

6450747-02

2RCM1338A9SCADSS-K

6450748-02

5/8" Axle Kit, SCAD Rotor, SS Caliper 5/8" Axle Kit, Stainless Steel

Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.

6450750

WWW.TEXTRAIL.COM

6450751

6450752

A-66

6450755

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & AIRFLEX BTMRfor A K7KE-S8K Axles

Item

1 2 3 4 5 6 7 8 9 10 11 12 13

Part #

9000144

9100113 9100098 9100114 9100115

Ref # 3-272 3-273 34-279 6-38 12-60-2 7-259 5-58 11-89-1 5-143 6-122-1 6-116 3-261 7-177 5-111 6-126 71-632-1 71-632-2 71-632-3 71-632-4

Qty/Brk 1 1 2 16 4 4 6 8 2 2 2 2 6 6 6

WWW.TEXTRAIL.COM

Description LH Suspension Assembly (Includes RH Suspension Assembly (Includes Air Spring 5/8"-11 Hex Locknut GRB Zinc Tie Plate Dichromate Plated 1/2"-13 x 1" Long Hex Bolt UNC 1/2" Lock washer 0.125" 5/8"-11 x 7.25" Long U-Bolt for 3.50" Axle Tube 3/4" Lock washer 3/4"-16 Hex Jam Nut RH GR2 1/2"-13 Hex Nut GR2 Side Mount Mounting Bracket 5/8"-18 x 1.5" Long Mounting Hex Bolt GR5 5/8" Plain Washer 0.179" 5/8"-18 Hex Lock Nut Air Control Kit - Tandem Plumbing with Ride Height Control Valve Air Control Kit - Air Generation (including compressor & tank) Air Control Kit - Manual Dump Valve Kit Air Control Kit - Tri-Axle Conversion Plumbing Kit A-67

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 9,000 lb. -10,000BlbRGeneral A K E SDuty Axle Springs 9,000 lb. -10,000 lb General Duty Axle Springs 9,000 lb.

Description Slipper 2" x 30" 6 Leaf Slipper 2" x 30" w/ 5/8" Rubber / Steel Bushing 6 Leaf Slipper 2" x 29-1/2" Slipper 2-1/2" x 30-1/2" w/ 7/8" Brass Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Bronze Bushing 5 Leaf Slipper 2-1/2" x 32-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 3" x 30-1/2" 5 Leaf Slipper 3" x 30-1/2" 6 Leaf Slipper 3" x 30-1/2" 7 Leaf

Capacity

Part #

4,500 lb. 4,500 lb.

10,000 lb. General Duty

Ref#

Part #

Ref#

9150001

72-10

n/a

n/a

9150059

72-10-2

n/a

n/a

5,300 lb.

9150026

E8536

n/a

n/a

5,000 lb.

n/a

n/a

9150046

72-77

5,000 lb.

n/a

n/a

9150033

72-80

5,000 lb.

n/a

n/a

9150027

72-21

5,000 lb.

n/a

n/a

9150029

93161A

5,000 lb.

n/a

n/a

9150028

72-43-1

6,000 lb.

n/a

n/a

9150030

72-44-1

7,500 lb.

n/a

n/a

9150032

72-45-1

Hanger Kits 9,000 lb.

10,000 lb. General Duty

2" Springs

Description

Part #

Ref#

2-1/2" Springs

Part #

Ref#

n/a n/a 9100065 HAP-157-00 Double Eye Single Axle 7/8" Eye* n/a n/a 9100070 HAP-157-01 Double Eye Single Axle 7/8" Eye 38" Spacing** n/a n/a 9100069 HAP-257-02 Double Eye Single Axle 7/8" Eye 42-1/4" Spacing** n/a n/a 9100066 HAP-257-03 Double Eye Single Axle 7/8" Eye 48-1/2" Spacing** 9100011 HAP-105-00 9100072 HAP-158-00 Slipper Single Axle* 9100008 HAP-205-01 9100089 HAP-258-01 Slipper Tandem Axle 38" Spacing** 9100009 HAP-205-02 9100090 HAP-258-02 Slipper Tandem Axle 42-1/4" Spacing** 9100010 HAP-205-03 9100091 HAP-258-03 Slipper Tandem Axle 48-1/2" Spacing** * Complete single axle hanger kit. ** Single axle hanger kit is required with tandem axle kit to create a complete tandem axle hanger kit.

U-Bolt Kits Part #

Description 5/8" Diameter 5" Round 8-15/16" Long

Type

n/a n/a n/a n/a 9100012 9100006 9100055 9100005

n/a n/a n/a n/a HAP-103-00 HAP-203-01 HAP-203-02 HAP-203-03

10,000 lb. General Duty

Part #

Part #

865

865

6151490

6151505

Electric 12-1/4" x 3-3/8" Electric Straight w/ Oil

865

865

6151491

6151506

Hydraulic 12-1/4" x 3-3/8" Duo-Servo Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil

865

865

6151492

6151507

6151493

6151508

A-68

Ref#

APUBR5

Idler Idler Straight w/ Oil

WWW.TEXTRAIL.COM

Part #

Ref#

9100096

9,000 lb. -10,000 lb General Duty Axles 9,000 lb.

3" Rubber Bushed Springs

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 10,000 lb. - 15,000 lbA Heavy BR K E SDuty Axle Springs

10,000 lb. - 15,000 lb Heavy Duty Axle Springs 10,000 lb. 12,000 lb. Capacity Part # Ref# Part # Ref#

Description

Slipper 2-1/2" x 30-1/2" w/ 7/8" Brass Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 32-1/2" w/ 3/4" Rubber Bushing 5 Leaf Slipper 2-1/2" x 30-1/2" w/ 3/4" Bronze Bushing 5 Leaf Slipper 3" x 30-1/2" 5 Leaf Slipper 3" x 30-1/2" 6 Leaf Slipper 3" x 30-1/2" 7 Leaf

15,000 lb. Part # Ref#

5,000 lb.

9150046

72-77

n/a

n/a

n/a

n/a

5,000 lb.

9150033

72-80

n/a

n/a

n/a

n/a

5,000 lb.

9150029

93161A

n/a

n/a

n/a

n/a

5,000 lb.

9150027

72-21

n/a

n/a

n/a

n/a

5,000 lb.

9150028

72-43-1

9150028

72-43-1

9150028

72-43-1

6,000 lb.

9150030

72-44-1

9150030

72-44-1

9150030

72-44-1

7,500 lb.

9150032

72-45-1

9150032

72-45-1

9150032

72-45-1

Hanger Kits Part #

Description

Ref#

9100012 Slipper Single Axle* 9100006 Slipper Tandem Axle 38" Spacing** 9100055 Slipper Tandem Axle 42-1/4" Spacing** 9100005 Slipper Tandem Axle 48-1/2" Spacing** * Complete single axle hanger kit. ** Single axle hanger kit is required with tandem axle kit to create a complete tandem axle hanger kit.

HAP-103-00 HAP-203-01 HAP-203-02 HAP-203-03

U-Bolt Kits Part #

Description

Ref#

5/8" Diameter 5" Round 8-15/16" Long 6151528

6151565

10,000 lb. - 15,000 lb Heavy Duty Axles Type Idler Idler Straight w/ Oil Electric Electric Straight w/ Oil Hydraulic Duo-Servo Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil Hydraulic Disc Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil Air Hydraulic Straight w/ Oil ABS Hydraulic Straight w/ Oil

10,000 lb.

12,000 lb. Low-Profile

12,000 lb. High-Profile

15,000 lb.

Part #

Part #

Part #

Part #

865

865

865

8-275mm

6151520

n/a

n/a

n/a 8-275mm

865

865

865

6151521

6151541

6151540

6151565

865

865

865

8-275mm

6151522

6151546

6151544

6151566

6151523

n/a

6151545

6151567

865

865

865

8-275mm

6151524

n/a

6151542

n/a

6151525

n/a

6151543

n/a

865

865

865

8-275mm

6151526

6151549

6151547

6151568

6151527

6151550

6151548

6151569

Air with Park Hydraulic Straight w/ Oil

865

865

865

8-275mm

6151528

6151553

6151551

6151570

ABS Hydraulic Straight w/ Oil

6151529

6151556

6151552

6151571

WWW.TEXTRAIL.COM

A-69

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 10,000 lb Torflex® B RAxles A K&EAxle S Components

TF#13G & D - 10,000 lb. Torflex® Hanger Kits Description TF13G & D Side Mount Hanger Kit - Weld On

Part #

Ref#

9100001

A/P-169

*** 13G & D Torflex axles are standard high profile, top mounted and oil bath.

TF#13G - 10,000 lb. General Duty Torflex® Axles*** Type

Part #

Electric 12-1/4" x 3-3/8"

865

Electric

6152184

Hydraulic Duo-Servo

6152185

ABS Hydraulic Duo-Servo

6152186

TF#13D - 10,000 lb. Heavy Duty Torflex® Axles*** Type

Part #

Electric 12-1/4" x 4"

865

Electric

6152187

Hydraulic Duo-Servo

6152188

ABS Hydraulic Duo-Servo

6152189

TF#13G - 10,000 lb. General Duty Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum

Maximum

Hub Face (Single Wheel)

22.75"

34.25”

Track Width (Dual Wheel)

23.50"

34.25”

TF#13D - 10,000 lb. Heavy Duty Torflex® Axles difference between Hub Face and Outside Mounting Bracket Minimum

Maximum

Hub Face (Single Wheel)

24.50"

34.25”

Track Width (Dual Wheel)

25.25"

34.25”

WWW.TEXTRAIL.COM

A-70

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 9K -10K General Duty Replacement Hub BRAK E S& Hub and Drum Components

Item

Part #

OIL LUBE PARTS Description

Ref #

Unitized Oil Seal 3.88"OD x 2.875"ID 2 7800024 387A Inner Bearing Cup 3 7800052 382A Inner Race Cone 4 7800054 25520 Outer Bearing Cup 5 7800026 25580 Outer Bearing Cone 6 8750007 6-96 Spindle Nut (2) 7 8750037 5-70 Spindle Washer 8 8750038 5-71 Tang Washer 1.5"ID x 0.060" 7700030-01 TTOC373 Oil Cap Kit (Includes Items 9-11) 7700215-02 TTOC374 Oil Cap Kit (Includes Items 9-1,10-1 &11)* 9 7700030 21-36 Oil Cap - TWO PIECE Hub 9-1 7700215 21-88 Oil Cap - ONE PIECE Hub 10 7700054 10-50 O-Ring - TWO PIECE Hub 10-1 7700216 10-163 O-Ring - ONE PIECE Hub 11 7700052 46-32 Oil Cap Plug 12 7700011 7-245 1/2"-13 x 1.50" Drum Mounting Bolt 13 6450020 7-116 7/16"-20 x 1.75" Brake Mounting Bolt 14 6450181 6-17 7/16"-20 Brake Mounting Hex Nut 7030116 5-8 7/16" Lock washer * Use 7700215-01 Oil Cap Kit for DX 1-Piece Hub & Drum Assembly 1

7700081

10-51

Ref #

HUBS*** Description

Bolt Circle

7650088

8-288-3

Cupped & Studded 9K-10K GD

8 on 6.50

7650007

9-44-1

7650108

9-44-3

Machined 9-10K GD NON-ABS ABS 9-10K GD ABS Assy

8 on 6.50 8 on 6.50

5/8"-18 Stud Oil 9-10K GD

8 on 6.50

5/8"-18 Stud Oil 9-10K GD

8 on 6.50

5/8"-18 Stud Oil 9-10K GD

8 on 6.50

Item Part # Plain Hubs 19

Drums 20

Two-Piece Hubs & Drums 7650057

8-288-5

One-Piece Hub & Drum 7650215

8-415-2

One-Piece ABS Hub & Drum 7650216

Item Hubs

8-415-4

HUBS COMPLETE*** Includes bearings, seal, cap & lug nuts. Part # Ref # Description 7650088-02 8-288-91 5/8"-18 Stud Oil 9-10K GD

Bolt Circle 8 on 6.50

Two-Piece Hub & Drum 7650057-02 8-288-90 5/8”-18 Stud Oil 9-10K GD

8 on 6.50

One-Piece Hubs & Drums Item

Part #

STUDS & WHEEL NUTS Ref # Description

15

7700107

7-115

16

7700034

6-58

17*

7700048

6-109

18*

7700033

33-52-1

5/8"-18 x 3.16" Pressed Wheel Stud 5/8"-18 Flange Nut 5/8"-18 90 Deg Cone Nut Wheel Retaining / Clamp Ring

Part #

Ref #

Description

23

97-4

24

24-204

25

97-2

Straight Sensor Sensor Block Sensor Clip

WWW.TEXTRAIL.COM

8 on 6.50

Item

Part #

12 1/4 x 3 3/8 BRAKES Ref # Description

21

6400044

23-450

6400045

23-451

6400014

23-410

6400015

23-411

LH Electric 9-10K GD Assy 7-Bolt FSA RH Electric 9-10K GD Assy 7-Bolt FSA LH Hydraulic Duo-Servo 9-10K GD Assy RH Hydraulic Duo-Servo 9-10K GD Assy

Ref #

Description

* Must use the 90 Degree Cone Nut with the Wheel Retaining / Clamp Ring. Alternate fastener is just the flange nut (Item 17).

Item

5/8”-18 Stud Oil 9-10K GD

7650215-02

22

ABS COMPONENTS Item Part # 26 26-1 ns

A-71

Tone Ring - TWO PIECE Hub 24-205-1 Tone Ring - ONE PIECE Hub 7-248 Tone Ring Screws 24-203

2010 Copyright by TexTrail, Inc.


10K Item Description 1 Unitized Oil Seal 4.50"OD x 3.125"ID 2 Inner Bearing Cone 3

4 5 6 7 8

9 10 11 12 13 14 15 16

17 18 19 20 21

Inner Bearing Cone Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Hubs with Cups & Studs Outer Bearing Cone Outer Bearing Cup Oil Cap O-Ring Oil Cap Oil Cap Plug Wheel Nut Hub Complete (Items 1-8) Hub Complete (Items 1-8) Hub Complete (Items 1-8) Hub Complete (Items 1-8 & 15-16) Inner Bearing Cup Inner Bearing Cup Outer Bearing Cup Outer Bearing Cup Spindle Washer 1.75"ID Spindle Nut 1.75"-12 Tang Washer 1.75"ID x .060" Wheel Clamp Ring Drum Mounting Bolt Brake Drum Brake Drum Brake Drum - ABS Brake Drum - ABS Rotor Mounting Bolt Rotor Mounting Nut Brake Drum Rotor Brake Drum Rotor - ABS Wheel Mounting Stud Wheel Mounting Stud Flange Nut (Swivel)

WWW.TEXTRAIL.COM

Ref # 10-56 395S 3984 8-214-5 8-214-6 8-216-8 8-214-8 8-214-10 8-401-5 387A 28682 10-50 21-36 46-32 6-109 8-214-92 8-216-97 8-214-96 8-214-95 394A 3920 382A 28622 5-60 6-84 5-59 33-52-1 7-244 9-27-1 9-28-1 9-27-3 9-28-5 25-14 6-46 70-6-1 70-6-2 7-115 7-194 6-118

10K Disc

12K Low-Profile

12K Hi-Profile

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 10K Heavy Duty -15K Replacement B R AHub K E&SHub and Drum Components

12K Disc

15K

8 on 6.50

8 on 6.50

8 on 6.50

8 on 6.50

8 on 6.50

8 on 275 mm

7700077 7800040

7700077 7800040

7700077

7700077

7700077

7700077

7800004

7800004

7800004

7800004

7650064 7650132 7650068 7650066 7650067 7650107 7800024

7800024

7700054 7700030 7700052 7700048 7650064-02

7700054 7700030 7700052 7700048

7800025 7700054 7700030 7700052 7700048

7800025 7700054 7700030 7700052 7700048

7800025 7700054 7700030 7700052 7700048

7800025 7700054 7700030 7700052

7650068-02 7650066-02 7650066-03 7800005

7800005

7800052

7800052

8750042 8750008 8750041 7700033 7700010 7650004

8750042 8750008 8750041 7700033

7800042

7800042

7800042

7800042

7800053 8750042 8750008 8750041 7700033 7700010

7800053 8750042 8750008 8750041 7700033 7700010

7800053 8750042 8750008 8750041 7700033

7800053 8750042 8750008 8750041

7650005

7650005

7650028

7650028

7700010 7650005

7650026

7700107

6450242 9000137 6450199 6450299 7700107

7700107

7700107

7650028 6450242 9000137 6450199 6450299 7700107 7700171 7700172

A-72

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 9,000 lb -10,000 lb General Duty B RDisc A KBrake E S Assemblies & Components

Rotary Style 8 on 6.5" Bolt 11" Leaf Spring & Pattern 5/8" 13" Torsion Bolts

For 16" Dual or 17.5" Single Wheels

Fits Dexter 7-Bolt Brake Flange

REPLACEMENT PARTS Description

Item

Part #

Ref #

1

6450903

DBC338MHGB

2

6450899

DBC338MHBS

6450901

DBC338MHBSB

3

6450552

DBCFIFMP90

4

6450553

DBCNPTADPBBS

6451000

DBCNPTBBS

6451001

DBCNPTADP

12

6

6450873

DBC338E

6450874

DBC338SCAD

6450875

DBC338SS

6450895

DBC338PISTON

6450896

DBC338PISTONSS

7

6450898

DBC338SEAL

8

6450897

DBC338BOOT

6450866

ROTOR11910D8

6450870 6450868 6450871

ROTOR13910D8 ROTOR11910D8SCAD

10

6450878

CMB11910DSCAD

11

6450892 6450893

ROTOR10DSPACERSCAD

ROTOR13910D8SCAD

ROTOR10DSPACER

6450886

DBC338CERMPAD

6450848

2RCMS1110D-K

Description 5/8" Leaf Spring Axle Kit, STD Rotor, E-Coat Caliper 5/8" Torsion Axle Kit, STD Rotor, E-Coat Caliper

Ref #

6450856

2RCMS1310D-K

Bleed Screw Port 1/4"-28 Bleed Screw Adapter 1/8"

6450847

2RCMS1110DSCAD-K

Caliper E-Coat Caliper Silver Cadmium Plated Caliper Stainless Steel 3-3/8" Silver Cadmium Plated Finish 3-3/8" Stainless Steel Piston Piston Rubber Seal Rubber Dust Boot

Brake Pads (Semi-Metallic) Brake Pads (Ceramic)

Bolt Dexter Axle Rotor Only Kits

Bleed Port / Screw Assy (Contains Next 2 Items)

6450857

2RCMS1310DSCAD-K

6450849

2RCMS1110DSCADSS-K

6450858

2RCMS1310DSCADSS-K

5/8" Leaf Spring Axle Kit, SCAD 5/8" Torsion Axle Kit, SCAD 5/8" Leaf Spring Axle Kit, SCAD Rotor, SS Caliper 5/8" Torsion Axle Kit, SCAD Rotor, SS Caliper

#99 Spindle Axle Rotor Only Kits Item

Dexter Axle Rotor and Caliper Mounting Bracket 9

DBC338SMPAD

13 Includes Items 1 thru 12 Item Part #

Stainless Steel Guide Bolt M11 x 1.5 Stainless Steel Sleeve Rubber Bushing for Guide Bolt Sleeve Adapter Port 90 deg 1/8" NPT to 3/16" FIF

Caliper comes w/ items 1-8 5

6450716

Kits contain parts for one complete axle

11" Leaf Spring Rotor Standard Automotive Finish 13" Torsion Rotor Standard Automotive Finish 11" Leaf Spring Rotor Silver Cadmium Plated 13" Torsion Rotor Silver Cadmium Plated Caliper Mounting Bracket Silver Cadmium Plated Rotor Spacer Standard Automotive Finish Rotor Spacer Silver Cadmium Plated

Part #

Ref #

6450851

2RCMHS1110A-K

6450859

2RCMHS1310A-K

6450850

2RCMHS1110ASCAD-K

6450860

2RCMHS1310ASCAD-K

6450852

2RCMHS1110ASCADSS-K

6450861

2RCMHS1310ASCADSS-K

Description 5/8" Leaf Spring Axle Kit, STD Rotor, E-Coat Caliper 5/8" Torsion Axle Kit, STD Rotor, E-Coat Caliper 5/8" Leaf Spring Axle Kit, SCAD 5/8" Torsion Axle Kit, SCAD 5/8" Leaf Spring Axle Kit, SCAD Rotor, SS Caliper 5/8" Torsion Axle Kit, SCAD Rotor, SS Caliper

#99 Spindle Axle Rotor and Caliper Mounting Bracket 11" Leaf Spring Rotor Standard Automotive Finish 13" Torsion Rotor Standard Automotive Finish 11" Leaf Spring Rotor Silver Cadmium Plated 13" Torsion Rotor Silver Cadmium Plated

6450866-02

ROTOR11910A8

6450870-02

ROTOR13910A8

6450868-02

ROTOR11910A8SCAD

6450871-02

ROTOR13910A8SCAD

6450880

CMB11910ASCAD

Leaf Spring Caliper Mounting Bracket Silver Cadmium Plated

6450746

ROTOR10ASPACER

Rotor Spacer Standard Automotive Finish Rotor Spacer Silver Cadmium Plated

6450847

Leaf Spring Axle Kit

6450857

Torsion Axle Kit

6450756 ROTOR10ASPACERSCAD Kodiak's offers the ONLY complete ALL STAINLESS STEEL Disc Brake Set in the Industry. Stainless Steel is the best available corrosive resistant material. The Stainless Steel Kits come with a 6 Year Warranty verses the Standard 3 Year Limited Warranty.

WWW.TEXTRAIL.COM

A-73

2010 Copyright by TexTrail, Inc.


Item

1 2 3 4

5 6 7 8 9 10

11 12 13 14 15

16 17 18

19 20 21

Description LH Electric FSA Assembly RH Electric FSA Assembly LH Electric FSA Assembly RH Electric FSA Assembly LH Electric FSA Assembly RH Electric FSA Assembly LH Electric FSA Assembly RH Electric FSA Assembly Adjuster Spring LH Adjuster Lever RH Adjuster Lever Adjuster Cable 10" Long Magnet Kit Magnet Kit Magnet Kit Magnet Spring Magnet Retaining Clip 7/16"-20 Anchor Post Flange Nut Magnet Retaining Clip LH Lever Arm Retainer RH Lever Arm Retainer LH Actuator Arm Assembly LH Actuator Arm Assembly RH Actuator Arm Assembly RH Actuator Arm Assembly Return Spring Adjuster Clip - Barrel End LH Adjuster Assembly

Ref # 23-450 23-451 23-438 23-439 23-442 23-443 23-446 23-447 46-137 71-464 71-463 71-462 71-376 71-377 71-378 46-117 27-50 6-92-1 27-39 71-455-1 71-455-2 47-123-38 47-123-36 47-123-37 47-123-35 46-119 46-133 48-19

Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1

RH Adjuster Assembly Adjuster Clip - Thread End LH Shoe & Lining Kit LH Shoe & Lining Kit LH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit RH Shoe & Lining Kit Centering Spring 7/16"-20 x 1.75 Brake Mounting Bolt Dust Shield Dust Shield Dust Shield 7/16" Brake Mounting Lock washer 7/16"-20 Brake Mounting Hex Nut Wire Grommet 0.437 Dia.

48-20 46-132 71-499 71-501 71-503 71-498 71-500 71-502 46-136 7-116 36-115-21 36-115-22 36-115-23 5-8 6-17 46-16

1 1 1 1 1 1 1 1 2 7 1 1 1 7 7 1 A-74

WWW.TEXTRAIL.COM

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12-1/4� 9K - 15K ElectricBBrake & Components R A KAssemblies ES

9K - 10K GD

10K

12K

15K

12 1/4 x 3 3/8 6400044 6400045

12 1/4 x 4

12 1/4 x 5

12 1/4 x 5

6400019 6400018 6400023 6400022

6450275 6450146 6450150 6450088 6450174-01

6450275 6450146 6450150 6450088 6450174-01

6450275 6450146 6450150 6450088

6400025 6400024 6450275 6450146 6450150 6450088

6450169-01 6450232 6450194 6450177 6450102 6450211 6450212

6450183-01 6450232 6450194 6450177 6450102 6450211 6450212

6450267

6450267

6450237 6450101 6450011

6450268 6450237 6450101 6450011

6450268 6450237 6450101 6450011

6450010 6450100

6450010 6450100

6450010 6450100

6450048

6450048

6450047 6450097 6450020

6450047 6450097 6450020

6450117 7030116 6450181 6450001

6450117 7030116 6450181 6450001

6450232 6450194 6450177 6450102 6450211 6450212 6450271

6450232 6450194 6450177 6450102 6450211 6450212 6450271

6450270

6450270

6450237 6450101 6450011 6450010 6450100 6450059

6450041 6450060 6450042 6450097 6450020 6450118

6450097 6450020

6450269 7030116 6450181 6450001

7030116 6450181 6450001

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 12-1/4� 9K - 15K Hydraulic & Components B RBrake A K EAssemblies S

Ref #

Qty

9K - 10K GD 12 1/4 x 3 3/8

LH Hydraulic FSA Assembly

23-410

1

6400014

RH Hydraulic FSA Assembly

23-411

1

6400015

LH Hydraulic FSA Assembly

23-404

1

6400020

RH Hydraulic FSA Assembly

23-405

1

6400021

LH Hydraulic FSA Assembly

23-408

1

6400088 6400089

Item Description

1

2 3

4

RH Hydraulic FSA Assembly

23-409

1

LH Hydraulic FSA Assembly

23-406

1

RH Hydraulic FSA Assembly

23-407

1

Dust Shield

36-115-21

1

Dust Shield

36-115-22

1

Dust Shield

36-115-23

1

Retainer Ring

69-53

1

6450264 6450081

LH Shoe & Lining Kit

71-165

1

LH Shoe & Lining Kit

71-167

1

LH Shoe & Lining Kit

71-169

1

RH Shoe & Lining Kit

71-166

1

RH Shoe & Lining Kit

71-168

1

RH Shoe & Lining Kit

71-170

1

Shoe Hold Down Screw

7-113

2

10K 12 1/4 x 4

12K 12 1/4 x 5

15K 12 1/4 x 5

6400090 6400091 6450118 6450269 6450264

6450117

6450117

6450264

6450264

6450077

6450077

6450074 6450080 6450073 6450076

6450076

6450203

6450203

6450203

6450203

5

Adjuster Cable 10" Long

71-462

1

6450088

6450088

6450088

6450088

6

Wheel Cylinder Kit

71-81

1

6450028

6450028

6450028

6450028

7

Cylinder Push Rod

54-33

2

6450259

6450259

6450259

6450259

8

Spider Assembly

36-63-6

1

6450317

6450317

6450317

6450317

9

Spring Retractor

46-87

1

6450219

6450219

6450219

6450219

10

LH Adjuster Lever

71-464

1

6450146

6450146

6450146

6450146

RH Adjuster Lever

71-463

1

6450150

6450150

6450150

6450150

11

LH Adjuster Spring

46-135

1

6450013

6450013

6450013

6450013

RH Adjuster Spring

46-134

1

6450014

6450014

6450014

6450014

12

Cable Attachment Bracket

13

Spring Extension

71-456

1

6450280

6450280

6450280

6450280

46-131-1

1

6450291

6450291

6450291

6450291

14

Adjuster Clip - Barrel End

46-133

1

6450101

6450101

6450101

6450101

15

LH Adjuster Assembly

48-19

1

6450011

6450011

6450011

6450011

RH Adjuster Assembly

48-20

1

6450010

6450010

6450010

6450010

16

7/16"-20 x 1.75 Brake Mounting Bolt

7-116

7

6450020

6450020

6450020

6450020

17

Piston Stop

34-62

1

6450260

6450260

6450260

6450260

18

Adjuster Clip - Thread End

46-132

1

6450100

6450100

6450100

6450100

19

7/16"-20 Brake Mounting Hex Nut

6-17

7

6450181

6450181

6450181

6450181

20

7/16" Brake Mounting Lockwasher

5-8

7

7030116

7030116

7030116

7030116

WWW.TEXTRAIL.COM

A-75

2010 Copyright by TexTrail, Inc.


Item 1 2 3

Description Anchor Yoke Assembly (includes 6ea of Item 6) Caliper Assembly (includes items 3, 6, 9 & 10) Caliper Piston Disc Brake Replacement Pad Kit (includes items 4, 5, 8 & 11)

Caliper Repair Kit (includes items 6, 7, 9 & 10 12 Shoulder Screw / Caliper Guide Bolt 5/8" x 5" 13 7/16"-20 x 1.75 Brake Mounting Bolt 14 1/2"-20 Grade B Flange Nut 15 7/16"-20 Grade 5 Hex Nut 16 1/2"-13 x 1/2"-20 x 2.38 Grade 5 Rotor Stud

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 10K & 12K Hydraulic Disc & Components B Brake R A KAssemblies ES

Ref # 90-2-2 89-2-2 54-66

Qty 1 1 2

10K & 12K 6450252 6450091 6450093

71-180

1

6450109

71-181 7-186 7-116 6-46 6-17 25-14

1 2 7 8 7 8

6450025 6450200 6450020 9000137 6450181 6450242

See page A-70 for hub or rotor replacement

WWW.TEXTRAIL.COM

A-76

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

Air Brake Components

AX L E S , AX L E A S S E M B L I E S & BRAKES ‘PQ’ Style

6450274

6450096 Qty per Brk Item 1 2 3 4

Description

Ref #

10K

12K-15K

12 1/4 x 4

12 1/4 x 5

Shoe & Lining Assembly - Shoe & Block

40-320-1

2

6450262

6450263

Top Shoe & Roller Assembly - Includes 2, 6-8 & 11 Bottom Shoe & Roller Assembly - Includes 2, 6-8 & 11 Brake Shoe Hardware Kit (Contains Items 3-11) Spider Anchor Bushing Pin 1.26”ID X 1.37” OD 1.45” Long Shoe Keeper Spring

40-320-2 40-320-3 K71-460

1 1 1 2 2

6050047 6050045 6450274

6400001 6050046

5 6 7 8 9 10 11

Anchor Pin 1.25 X 2.218 Double Ended 1.00 Dia Roller Pin Retainer Ring for 0.750 Shaft Washer Plain 0.75” x 0.149” Roller Pin Spacer Roller 0.75” ID X 1.5” OD x 1.38” Steel Plated & Knurled Retractor Spring Retainer Pin Roller Pin Knurled 0.75” x 2.16” Camshaft Repair Kit (Contains Items 12-20) 12 Camshaft “D” Washer 13 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 14 Camshaft Nylon Bushing 1.88” OD x 1.5” ID x 1.5” Long 15 Camshaft Spider End 16 Camshaft Retainer Ring 17 Grease Zerk 1/4”-27 65 Degree Angle 1/8”-27 MPT 18 Camshaft Support Bushing 19 Washer Plain 1.26 x 1.88 x .06 Camshaft 20 Camshaft End Retainer Camshaft End Retainer 21 1/4"-20 Zinc Plated Hex Nut 22 1/4" 0.062 Zinc Plated Lock Washer 23 Plate - Bushing Retainer 24 Plate - Camshaft Support Bracket 25 1/4"-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 26 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 27 LH Small S Head Hi Rise Cam Shaft 21.125" RH Small S Head Hi Rise Cam Shaft 21.125" LH Small S Head Hi Rise Cam Shaft 16.375" RH Small S Head Hi Rise Cam Shaft 16.375" LH Small S Head Hi Rise Cam Shaft 22.312" RH Small S Head Hi Rise Cam Shaft 22.312" 28 Nut - 2-5/8" Fine Outer Spindle Nut 29 Lock washer - Tab 30 Lock washer - Indexing 31 Nut - 2-5/8" Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw

2 2 2 1 1 2 2 K71-101

6450096 6050048 6050049 6050050 6050051 6050053 9000096

6050048 6050049 6050050 6050051 6050053 9000096

6050052

6050052

34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114

1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2

SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050035 6050036 6050036 6050033 6050033 6050034 6050034 6050037 6050037 6050038 6050038 8750056 8750056 8750058 8750058 7800073 7800073 8750055 8750055

97-2 97-7 24-203 24-101-1 7-237

1 1 1 1 2

6050055 6050055 6050056 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER

34-32 34-31

* Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness.

WWW.TEXTRAIL.COM

A-77

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 22.5K - 27.5K Replacement &E Hub B Hub RAK S and Drum Components

8 Stud on 275mm (10.827") Hubs with Outboard Drums For use with 17.5" or 19.5" 221mm piloted wheels Item

Part #

1

7800030

2

7800075

3

7800074

4

7800031 7700183

5

7700035

6

7700178

7

7700146

8

7700177

9

7700172

12

7700171

A B C D E F G H I J

OIL LUBE PARTS Description HM212049 Outer Bearing Cone HM212011 Outer Race Cup HM218210 Inner Bearing Cup HM218248 Inner Race Cone 940-4009 Oil Cap Kit (includes items 5-8) 71-124 Oil Cap Gasket 21-38-2 Oil Cap 7-157 Oil Cap Hex Screw 5/16"-18 x 0.75 5-100 Oil Cap Lock Washer 5/16" 6-118 Swivel Flange Nut 7-194 Press-In Stud M22 x 1.5 x 2.47" L 24-200-1 ABS Tone Ring Ref #

Item Part # Drums 10

7650209

Item Part # Hubs 11

Ref #

DRUM Description

Bolt Circle

9-116-1

12-1/4" x 7-1/2" Disc Wheel

8 on 275mm

Replacement HUBS Ref # Description 8-396-5 8-396-7

Steel Wheel Hub Assy ABS Steel Wheel Hub Assy

Bolt Circle 8 on 275mm 8 on 275mm

Hub & Drum Dimensional Information 3.34" Cup to Cup 0.75" Cup to Mounting Face 10.43" Cup to End of Drum 12.25" Brake Diameter 7.50" Shoe Brake Width 11.22" Drum Overall Width 9.00" Pilot Diameter (Drum) 10.827" Bolt Circle 275mm M22 x 1.5 Bolt Diameter 0.313" Hub Cap Hole Mounting 6 Holes 5.50 BC 1.575" Inner Bearing Cup and Cone Overall Stack Thickness

WWW.TEXTRAIL.COM

A-78

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 22.5K - 27.5K Replacement & Hub B Hub RAK E S and Drum Components

10 Stud on 8.75 Hubs with Inboard Drums For use with 15 or 17.5" ball seat mounted steel wheels Item

Part #

Ref #

1

7800074

HM218210

2

7800031

HM218248

3

7800075

HM212011

4

7800030

HM212049

7700183

940-4009

5

7700035

71-124

6

7700178

21-38-2

7

7700146

7-157

8

7700177

5-100

9

7700042

6-70-1

7700041

6-70-2

7700047

6-69-1

7700046

6-69-2

7700149

25-56-2

7700148

25-56-1

14

7030108

5-102

15

9000139

10 11

6-47 24-200-1

A

3.34"

B

0.81"

C

10.57"

D

12.25"

E

7.50"

F

10.50"

G

7.12"

H

8.75"

I

0.75"

J

0.313" 1.575"

OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Race Cone Oil Cap Kit (includes items 5-8) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud Washer Flat 3/4" 3/4"-16 Locknut ABS Tone Ring

Item Part # Drums 13

7650006

Item Part # Hubs & Drums 12 7650500 7650501

Ref #

DRUM Description

9-40-1

12-1/4" x 7-1/2" Disc Wheel 10 on 8.75

Replacement HUBS Ref # Description 8-277-04 8-277-05 8-277-23 8-277-22

LH Hub 10 8.75 BC RH Hub 10 8.75 BC LH Hub 10 8.75 BC ABS RH Hub 10 8.75 BC ABS

Bolt Circle

Bolt Circle 10 on 8.75 10 on 8.75 10 on 8.75 10 on 8.75

Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter Bolt Circle Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM

A-79

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 22.5K - 27.5K ReplacementBHub R A &KHub E S and Drum Components

D2-16 10 Stud on 11 1/4" Hubs with Inboard Drums Item

Part #

Ref #

1

7800074

HM218210

2

7800031

HM218248

3

7800075

HM212011

4

7800030

HM212049

7700183

940-4009

5

7700035

71-124

6

7700178

21-38-2

7

7700146

7-157

8

7700177

5-100

9

7700042

6-70-1

7700041

6-70-2

7700047

6-69-1

10

7700046

6-69-2

7700149

25-56-2

7700148

25-56-1

14

7030108

5-102

15

9000139

6-47

11

24-200-1

A B C D E F G H I

3.34" 0.81" 9.89" 16.50" 7.00" 9.58" 9.44" 11.25" 0.75"

J

0.313" 1.575"

OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Inner Bearing Cup Inner Race Cone Oil Cap Kit (includes items 4-7) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud Washer Flat 3/4" 3/4"-16 Locknut ABS Tone Ring

DRUM Item Part # Drums 13

Item Part # Hubs & Drums 12

Ref #

Description

Bolt Circle

9-42-1

16-1/2" x 7" Disc Wheel

10 on 11.25

Replacement HUBS Ref # Description LH Hub 10 11.25 BC 8-279-5 RH Hub 10 11.25 BC 8-279-4

Bolt Circle 10 on 11.25 10 on 11.25

Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter Bolt Circle Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM

A-80

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & 22.5K - 27.5K Replacement BHub R A &KHub E S and Drum Components

D2-16 10 Stud on 11 1/4" Hubs with Outboard Drums Item

Part #

Ref #

1

7800074

HM218210

2

7800031

HM218248

3

7800075

HM212011

4

7800030

HM212049

5

7700183

940-4009

6

7700035

71-124

7

7700178

21-38-2

8

7700146

7-157

9

7700177

5-100

10

7700042

6-70-1

7700041

6-70-2

11 12

7700047

6-69-1

7700046

6-69-2

7700149

7-242-1

7700148

7-242 6-124-2 6-124-1 24-200-1

A

3.34"

B

0.73"

C

9.87"

D

16.50"

E

7.00"

F

10.60"

G

8.78"

H

11.25"

I

0.75"

J

0.313" 1.575"

OIL LUBE PARTS Description Inner Bearing Cup Inner Race Cone Outer Bearing Cup Outer Race Cone Oil Cap Kit (includes items 4-7) Oil Cap Gasket Oil Cap Oil Cap Hex Screw 5/16"-18 x 0.75 Oil Cap Lock Washer 5/16" RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut RH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH 3/4"-16 x 1-1/8"-16 Inner Dual Wheel Nut LH Shoulder Stud RH Shoulder Stud RH 1-1/8"-16 Outer Dual Wheel Nut LH 1-1/8"-16 Outer Dual Wheel Nut ABS Tone Ring

Item Part # Drums 13

Item Part # Hubs & Drums 14

Ref #

DRUM Description

Bolt Circle

9-43-3

16-1/2" x 7" Disc Wheel

10 on 11.25

Ref #

Replacement HUBS Description

LH Wheel Hub Assy RH Wheel Hub Assy 8-290-70 LH ABS Wheel Hub Assy 8-290-69 RH ABS Wheel Hub Assy

Bolt Circle

8-290-68

10 on 11.25

8-290-67

10 on 11.25 10 on 11.25 10 on 11.25

Hub & Drum Dimensional Information Cup to Cup Cup to Mounting Face Cup to End of Drum Brake Diameter Shoe Brake Width Drum Overall Width Pilot Diameter (Drum) Bolt Circle 275mm Bolt Diameter Hub Cap Hole Mounting 6 Holes 5.50 BC Inner Bearing Cup and Cone Overall Stack Thickness WWW.TEXTRAIL.COM

A-81

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & S Head B R ACamshafts KES

S Head Camshaft 28 - Spline Small Head Hi-Rise 12.25" Brakes Description LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline LH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline RH Small S Head Hi Rise Cam Shaft 12.25" Air Brake 28 Spline WWW.TEXTRAIL.COM

A-82

Ref # 34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 34-188-9 34-189-9

Part # 6050035 6050036 6050033 6050034 6050037 6050038 6050030 6050031

A 21.125 21.125 16.375 16.375 22.312 22.312 26.500 26.500

B 2.219 2.219 2.219 2.219 2.219 2.219 2.219 2.219

C 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft 1.50" Dia. Shaft

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

Air Brake Components

AX L E S , AX L E A S S E M B L I E S & BRAKES

Qty per Brk

Item Description 1 Shoe & Lining Assembly - Shoe & Block Brake Shoe Hardware Kit (Contains Items 2-8) 2 Spider Anchor Bushing Pin 1.26"ID X 1.37" OD 1.45" Long 3 Bushing - Spider Anchor Pin 4 Retractor Spring 16-1/2" Brake - Orange 5 Shoe Keeper Spring - Orange 6 Anchor Pin 7 Retainer Pin - Retractor Spring 8 Roller Retainer Camshaft Repair Kit (Contains Items 12-20) 9 Camshaft Washer 10 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 11 Camshaft Nylon Bushing 1.88" OD x 1.5" ID x 1.5" Long 12 Washer Plain Camshaft Spider End 13 Camshaft Retainer Ring 14 Grease Zerk 1/4"-27 65 Degree Angle 1/8"-27 MPT 15 Camshaft Support Bushing 16 Washer Plain 1.26 x 1.88 x .06 Camshaft 17 Camshaft End Retainer 18 1/4”-20 Zinc Plated Hex Nut 19 1/4” 0.062 Zinc Plated Lock Washer 20 Plate - Bushing Retainer 21 Plate - Camshaft Support Bracket 22 1/4”-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 23 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 24 LH Small S Head Hi Rise Cam Shaft 21.125” RH Small S Head Hi Rise Cam Shaft 21.125” LH Small S Head Hi Rise Cam Shaft 16.375” RH Small S Head Hi Rise Cam Shaft 16.375” LH Small S Head Hi Rise Cam Shaft 22.312” RH Small S Head Hi Rise Cam Shaft 22.312” 25 Nut - 2-5/8” Fine Outer Spindle Nut 26 Lock washer - Tab 27 Lock washer - Indexing 28 Nut - 2-5/8” Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw

Ref # 40-180 K71-460

2 1 2 2 1 2 2 2 2

K71-135

22.5K-27.5K 16 1/2 x 7" 6450285 6450274

6450284 6050048 6050049 6050050 6050051 6050053 9000096

34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114

1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2

SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050036 6050033 6050034 6050037 6050038 8750056 8750056 7800073 8750055

97-2 97-3 24-203 24-101-1 7-237

1 1 1 1 2

6050055 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER

34-32 34-31

6450274

6050052

6450284

* Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness.

WWW.TEXTRAIL.COM

A-83

2010 Copyright by TexTrail, Inc.


Item Description Shoe & Lining Assembly - Shoe & Block 1 Top Shoe & Roller Assembly - Includes 2, 6-8 & 11 2 Bottom Shoe & Roller Assembly - Includes 2, 6-8 & 11 Brake Shoe Hardware Kit (Contains Items 3-11) 3 Spider Anchor Bushing Pin 1.26"ID X 1.37" OD 1.45" Long 4 Shoe Keeper Spring 5 Anchor Pin 1.25 X 2.218 Double Ended 1.00 Dia 6 Roller Pin Retainer Ring for 0.750 Shaft 7 Washer Plain 0.75" x 0.149" Roller Pin Spacer 8 Roller 0.75" ID X 1.5" OD x 1.38" Steel Plated & Knurled 9 Retractor Spring 10 Retainer Pin 11 Roller Pin Knurled 0.75" x 2.16" Camshaft Repair Kit (Contains Items 12-20) 12 Camshaft "D" Washer 13 Grease Seal Single Lip / Single Case 1.5 x 1.875 x 0.188 14 Camshaft Nylon Bushing 1.88" OD x 1.5" ID x 1.5" Long 15 Washer Plain 1.5 x 2.25 x .09 Camshaft Spider End 16 Camshaft Retainer Ring 17 Grease Zerk 1/4"-27 65 Degree Angle 1/8"-27 MPT 18 Camshaft Support Bushing 19 Washer Plain 1.26 x 1.88 x .06 Camshaft 20 Camshaft End Retainer 21 1/4”-20 Zinc Plated Hex Nut 22 1/4” 0.062 Zinc Plated Lock Washer 23 Plate - Bushing Retainer 24 Plate - Camshaft Support Bracket 25 1/4”-20 X 0.88 Zinc Plated GR-2 Retainer Plate Hex Bolt 26 Auto Slack Adjuster - 28 Spline Manual Slack Adjuster - 28 Spline 27 LH Small S Head Hi Rise Cam Shaft 21.125” RH Small S Head Hi Rise Cam Shaft 21.125” LH Small S Head Hi Rise Cam Shaft 16.375” RH Small S Head Hi Rise Cam Shaft 16.375” LH Small S Head Hi Rise Cam Shaft 22.312” RH Small S Head Hi Rise Cam Shaft 22.312” 28 Nut - 2-5/8” Fine Outer Spindle Nut 29 Lock washer - Tab 30 Lock washer - Indexing 31 Nut - 2-5/8” Fine Inner Spindle Nut ABS Components: 32 ABS Sensor Retaining Clip 33 ABS Sensor 90 Degree 34 ABS Tone Ring in Drum 35 ABS Upper Sensor Mounting Block 36 ABS Upper Sensor Mounting Screw

Ref #

Qty per Brk

40-320-1 40-320-2 40-320-3 K71-460

2 1 1 1 2 2 2 2 2 1 1 2 2

K71-101

22.5K-27.5K 12 1/4 x 71/2" 6450273 6400253 6400254 6450274

6450274 6450096 6050048 6050049 6050050 6050051 6050053 9000096

34-188 34-189 34-188-1 34-189-1 34-188-3 34-189-3 6-115 5-99 5-98 6-114

1 2 1 1 1 1 1 1 1 4 4 2 1 4 1 1 1 1 1 1 1 1 2 2 2 2

SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER 6050035 6050036 6050033 6050034 6050037 6050038 8750056 8750058 7800073 8750055

97-2 97-3 24-203 24-101-1 7-237

1 1 1 1 2

6050055 6050056 SPECIAL ORDER SPECIAL ORDER SPECIAL ORDER

34-32 34-31

AXLES. AXLE ASSEMBLIES & BRAKES

Air Brake Components

AX L E S , AX L E A S S E M B L I E S & BRAKES

6050052

6450096

* Note: 005-076-00 is required for 10K 12-1/4"x4" with 1/4" show web thickness. Not required for 5/16" thickness.

WWW.TEXTRAIL.COM

A-84

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Replacement B R A KSpindles ES

Spindles are machined to 1"-14 Thread with .190 cotter pin hole and come with spindle nut, washer and cotter pin. EZ-Lube Spindles come with spindle nut washer and tang washer. Part#

Ref #

8750016

R104BT8

8750057

R104BT16

8750087

R104BT16EZ

8750017

R104BTR

8750089

R104BT8-38

8750011

R204BT8

8750090

R204BTR

8750012

SP204BT8

8750021

SP20484

8750023

SP30684

8750091

R20484

8750028

R20484EZ

8750029

R30484EZ

8750022

R30484

8750054

R30684

8750024

R306.584

8750014

R40484

8750015

R40684

8750088

R50642

8750018

R40642

8750020

R50642

8750013

SP50642

Description

BT8 SPINDLE W/NUT WASHER &C-PIN BT16 SPINDLE W/NUT WASHER & C-PIN BT16 EZ-LUBE SPINDLE W/NUT & WASHERS BT16 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE W/NUT WASHER &C-PIN BT16 SPINDLE W/NUT WASHER & C-PIN BT8 SPINDLE SQUARE W/NUT WASHER &C-PIN 84 SPINDLE SQUARE W/NUT WASHER &C-PIN 84 SPINDLE SQUARE W/NUT WASHER &C-PIN NO.84 SPINDLE W/NUT WASHER &C-PIN NO.84 EZ-LUBE W/NUT & WASHERS NO.84 EZ-LUBE W/NUT & WASHERS NO.84 SPINDLE W/NUT WASHER &C-PIN NO.84 SPNDL W/NUT WASHER &C-PIN 10-7/8" NO.84 SPNDL W/NUT WASHER &C-PIN 11-3/8" NO.84 SPINDLE STUB W/NUT WASHER & C-PIN NO.84 SPINDLE STUB W/NUT WASHER & C-PIN NO.42 GRSLUBE FLGD W/NUT&WSHR NO.42 SPNDL W/NUT WASHER &C-PIN NO.42 SPNDL W/NUT WASHER &C-PIN 42 SPINDLE SQUARE W/NUT WASHER &C-PIN

A

F

B

C

D

Shank Dia.

Shank Length

Seal

Inner Bearing

Outer Bearing

E

Capacity

1.25 1.25 1.25 1.25 1.38 1.50 1.50 1.50 1.50 1.75 1.50 1.50 1.75 1.75 1.75 1.75 2.00 2.00 2.25 2.00 2.25 2.00

3.50 3.50 3.50 3.50 3.50 3.50 3.50 4.00 3.50 3.50 3.50 3.50 3.50 4.00 6.00 6.50 4.00 6.00 3.00 6.00 6.00 6.50

1.24 1.24 1.24 1.50 1.24 1.24 1.50 1.24 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 1.73 2.24 2.24 2.24 2.24

0.99 1.06 1.06 1.06 0.99 0.99 1.06 0.99 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.74 1.74 1.74 1.74

0.99 1.06 1.06 1.06 0.99 0.99 1.06 0.99 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.25 1.25 1.25 1.25

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,000 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 1,750 lb. 2,600 lb. 3,000 lb. 3,000 lb. 3,000 lb.

Agricultural Spindles

Part#

Ref #

8750050

S2500F

8750060

S3500F

8750070

S4500F

8750080

S6000F

Description

2.5K Round AG Spindle 3.5K Round AG Spindle 4.5K Round AG Spindle 6K Round AG Spindle

WWW.TEXTRAIL.COM

A

F

B

C

D

E

G

Shank Dia.

Overall Length

Seal

Inner Bearing

Outer Bearing

Treads

Distance to Center line of Cotter Pin

1.75 2.00 2.25 2.75

12.31 11.00 12.00 14.00

1.75 2.00 2.25 2.75

1.374 1.624 1.780 2.164

1.249 1.249 1.249 1.624

3/4"-16 3/4"-16 3/4"-16 1"-14

3.59 4.91 4.99 5.24

A-85

Capacity

2,500 lb. 3,500 lb. 4,500 lb. 6,000 lb.

2010 Copyright by TexTrail, Inc.


Type 3 1 2 4 1 1 5 3 5 3 n/a 6 6 6 1 2 2 1

Part# 8750035 8750036 8750033 8750040 8750046 8750034 8750038 8750037 8750041 8750042 7800073 7700125 7700129 7700131 8750039 8750032 8750031 8750096

Ref # 16-5863 SW1001 5-23 5-101 5-151 5-57 5-71 5-70 5-59 5-60 5-98 5-150 5-147-1 5-149 90525 H500-18 H500-17 SW750

Description Tongue Washer - Replacement Spindles Round Washer - Replacement Spindles Dexter D-Washer - 2K thru 6K (655 Hub) Dexter EZ-Lube Tang Washer - 2K thru 8K (before 6/02) Dexter EZ-Lube D-Washer - 2K thru 8K (before 6/02) Dexter D-Washer - 6K (865 Hub) thru 8K (9K before 10/89) Dexter Tang Washer - 9K & 10GD Dexter Tongue Washer - 9K & 10GD Dexter Tang Washer - 10K, 12K & 15K Dexter Tongue Washer - 10K, 12K & 15K Dexter Indexing Lock Washer 22.5 thru 27K 0.250" 14 Equally Spaced Holes Dexter 35MM Nev-R-Lube Spindle Washer 1.88" OD x 0.250"W Dexter 42MM Nev-R-Lube Spindle Washer 2.25" OD x 0.250"W Dexter 50MM Nev-R-Lube Spindle Washer 2.50" OD x 0.310"W AL-KO / Hayes Round Washer - 10-16K AL-KO / Belshe #99 Spindle Thin D-Washer AL-KO / Belshe #99 Spindle Thick D-Washer Reliable AG Round Washer x 1.750" OD x 0.183"W

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Spindle Washers BRA KES

ID 1" 1" 1" 1" 1" 1" 1.50" 1.50" 1.75" 1.75" 2.625" 1.062" 1" 1.062" 1.50" 0.812"

Spindle Nuts / Jam Nuts / Cotter Pins

1

Type 3 7 8 5 1 2 6 4 4 2 4 4

Item # 8750005 8750006 8750030 8750007 8750008 8750010 8750051 8750049 7700126 8750003 8750002 8750061 8750063 8750064

Ref # 6-1 6-191 6-190 6-96 6-84 090623 6-114 6-115 6-183 19-2 091903 SN750 SCP103 SCP102

Type 3 3 3 3

Item # 8750100-01 8750101-01 8750102-01 8750103-01

Ref # TTSN01 TTSN02 TTSN03 TTSN04

Description 1"-14 Castle Nut 2K - 8K (Dexter 2-8K & 9K before 10/89) 1"-14 Jam Nut - 2K thru 8K (Dexter use after 8/03) Spindle Nut Retainer - Use with 6-191 1-1/2"-12 Nut - Dexter 9K & 10GD 1-3/4"-12 Nut - Dexter 10K thru 15K 1-1/2"-12 Castle Nut - #99 Spindle (AL/KO #99 & #89) 2-5/8"-6 Inner Nut - 20K thru 27K 2-5/8"-6 Outer Nut - 20K thru 27K Spindle Nut - Dexter Nev-R-Lube Cotter Pin 1/8" x 1-3/4" long Cotter Pin - AL/KO 8K thru 16K (#89 & 99 spindle) Reliable Castle Nut 3/4"-16 ID Reliable Cotter Pin - 0.148" Dia x 5/16" W x 1.50" Long Reliable Cotter Pin - 0.174" Dia x 3/8" W x 1.937" Long Spindle Nut Kits Description 1" Castle Nut with 1" Tongue Washer & Cotter Pin 2-8K (2ea) 1" Castle Nut with 1" Round Washer & Cotter Pin 2-8K (2ea) 1" Castle Nut with 1" D-Washer, Tang Washer & Cotter Pin 3.5-6K (2ea) 1" Castle Nut with 1" D-Washer, Tang Washer & Cotter Pin 7-8K (2ea)

WWW.TEXTRAIL.COM

A-86

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Agricultural HubBAssemblies R A K E S & Components

7650150-02

25555FC

2.5K 555 1/2" STUD AG HUB ASSEMBLY

Item

Part #

Ref #

1

8750050

S2500F

Spindle Round 2.5K AG 1.75" Dia x 12.31" OAL 1-3/8" Bearing

2

7700245

SL175

Single Lip Seal 2.722" OD x 1.75" ID x 0.359"W

3

7800012

LM48548

Inner Bearing Cone

4

7800049

LM48510

Inner Bearing Cup

5

7800045

LM67010

Outer Bearing Cup

6

7800043

LM67048

Outer Bearing Cone

7

8750096

SW750

Spindle Washer Round 0.812" ID x 1.750" OD x 0.183"W

8

8750061

SN750

Spindle Nut 3/4"-16 ID Castle

9

8750063

SCP103

Cotter Pin 0.148 DIA x 5/16" W x 1-1/2" L

10

7700275

1604

11

7650150

25555F

1/2" Studded Black Hub 5 on 5.50 Bolt Circle

12

7700285

STN509

1/2"-20 90째 Cone Nut Zinc Grade 5 13/16"W

7650150-02

25555FC

1/2" Studded Black Hub Assembly 5 on 5.50 Bolt Circle

7650170-02

35660FC

Description

Grease Cap EZ Lube 2.440"

3.5K 660 9/16" STUD AG HUB ASSEMBLY

Item

Part #

Ref #

1

8750060

S3500F

Spindle Round 3.5K AG 2" Dia x 11" OAL 1-5/8" Bearing

2

7700250

SL200

Single Lip Seal 3.066" OD x 2" ID x 0.250"W

3

7800043

LM67048

Inner Bearing Cone

4

7800078

LM501349

Inner Bearing Cup

5

7800045

LM67010

Outer Bearing Cup

6

7800079

LM501310

Outer Bearing Cone

7

8750096

SW750

Spindle Washer Round 0.812" ID x 1.750" OD x 0.183"W

8

8750061

SN750

Spindle Nut 3/4"-16 ID Castle

9

8750063

SCP103

Cotter Pin 0.148 DIA x 5/16" W x 1-1/2" L

10

7700275

1604

11

7650170

35660F

9/16" Studded Black Hub 6 on 6.00 Bolt Circle

12

7700037

STN569

9/16"-18 90째 Cone Nut Zinc Grade 5 1"W

7650170-02

35660FC

9/16" Studded Black Hub Assembly 6 on 6.00 Bolt Circle

WWW.TEXTRAIL.COM

Description

Grease Cap EZ Lube 2.440"

A-87

2010 Copyright by TexTrail, Inc.


7650180-02

45880FC

4.5K 880 9/16" STUD AG HUB ASSEMBLY

Item

Part #

Ref #

1

8750070

S4500F

Spindle Round 4.5K AG 2.25" Dia x 14" OAL 1-3/4" Bearing

2

7700255

SL226

Single Lip Seal 3.066" OD x 2.25" ID x 0.250"W

3

7800081

LM603049

Inner Bearing Cone

4

7800080

LM603011

Inner Bearing Cup

5

7800045

LM67010

Outer Bearing Cup

6

7800043

LM67048

Outer Bearing Cone

7

8750096

SW750

Spindle Washer Round 0.812" ID x 1.750" OD x 0.183"W

8

8750061

SN750

Spindle Nut 3/4"-16 ID Castle

9

8750063

SCP103

Cotter Pin 0.148 DIA x 5/16" W x 1-1/2" L

10

7700275

1604

11

7650180

45880F

9/16" Studded Black Hub 8 on 8.00 Bolt Circle

12

7700037

STN569

9/16"-18 90째 Cone Nut Zinc Grade 5 1"W

7650180-02

45880FC

9/16" Studded Black Hub Assembly 8 on 8.00 Bolt Circle

7650190-02

60880FC

Description

Grease Cap EZ Lube 2.440"

6K 880 5/8" STUD AG HUB ASSEMBLY

Item

Part #

Ref #

1

8750080

S6000F

Spindle Round 6K AG 2.75" Dia x 14" OAL 2-1/8" Bearing

2

7700260

SL275

Single Lip Seal 3.756" OD x 2.75" ID x 0.250"W

3

7800079

LM501310

Inner Bearing Cone

4

7800082

JLM506810

Inner Bearing Cup

5

7800078

LM501349

Outer Bearing Cup

6

7800083

JLM506849

Outer Bearing Cone

7

8750036

SW1001

Spindle Washer Round 1.062" ID x 2.130" OD x 0.245"W

8

8750005

SN1001

Spindle Nut 1"-14 ID Castle

9

8750064

SCP102

Cotter Pin 0.174 DIA x 3/8" W x 1-15/16" L

10

7700280

1609

11

7650190

60880F

5/8" Studded Black Hub 8 on 8.00 Bolt Circle

12

7700290

STN629

5/8"-18 90째 Cone Nut Zinc Grade 5 15/16"W

7650190-02

60880FC

5/8" Studded Black Hub Assembly 8 on 8.00 Bolt Circle

WWW.TEXTRAIL.COM

Description

Grease Cap EZ Lube 3.125"

A-88

2010 Copyright by TexTrail, Inc.

AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Agricultural HubBAssemblies R A K E S & Components


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Axle B RSpring A K ESeats S Item # 9000181 9000182 9000183 9000185 9000186 9000179 9000180

Ref # Description 3-49 SPRING SEAT FOR 1.75" RND AXLE 3-43 SPRING SEAT FOR 2 3/8" RND AXLE 3-42 SPRING SEAT FOR 3" RND AXLE 3-48 SPRING SEAT FOR 3 1/2" RND AXLE 3-51 SPRING SEAT FOR 4" RND AXLE 3-72 SPRING SEAT FOR 5" RND AXLE - 10GD 2.5" SPR 3-66 SPRING SEAT FOR 5" RND AXLE - 10K-15K 3" SPR Brake Mounting Flanges

Item # 6450033 6450034 6450029

Ref # Description 4-34 Brake Flange 2K Type K BTR 4-35 Brake Flange 3.5K Type K 4-44-1 Brake Flange 5.2K - 7K Type B

Use With

Holes

Bolt Centers

Pilot

1.75" Round

4-Hole

4"

1.64"

2.375" Round

4-Hole

4"

2.27"

3" Round

5-Hole

3.88"

2.75"

Brake Mounting Hardware Item # 6450241 6450307 6450240 6450019 6450020 7700011 7700010 6450181 6450177 6450182 6450308 9000137 7030116 9000250 9000251

Ref # Description 7-75 7/16"-20 x 0.89" Grade 5 Pressed Brake Mounting Stud 7-271 7/16"-20 x 1.18" Grade 5 Pressed Brake Mounting Stud 7-112 3/8"-24 x 0.88" Grade 5 Pressed Brake Mounting Stud 7-97 1/2"-20 x 1.75" Grade 5 Pressed Brake Mounting Stud 7-116 7/16"-20 x 1.75" Grade 5 Brake Mounting Bolt 7-245 1/2"-13 X 1.5" Grade 8 Brake Drum Mounting Bolt 7-244 1/2"-13 X 1.75" Grade 8 Brake Drum Mounting Bolt 6-17 7/16"-20 Grade 5 Brake Mounting Hex Nut 6-92 7/16"-20 Grade B Lock Flange Nut 6-10 3/8"-20 Grade 5 Brake Mounting Hex Nut 6-193 3/8"-24 Grade B Brake Mounting Nut 6-46 1/2"-20 Grade B Brake Mounting Nut 5-8 7/16" Brake Mounting Lock Washer 33621 3/8" Brake Mounting Lock Washer 5-58 1/2" Brake Mounting Lock Washer

WWW.TEXTRAIL.COM

A-89

Axle 2K - 3.5K 4.4K 5.2K - 7K 7.2K - 9K 9K - 15K 9K - 10KGD 10KHD - 15K

2K - 15K 2K - 15K 5.2K - 7K 5.2K - 7K 7.2K - 9K 2K - 15K 5.2K - 7K 7.2K - 9K

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Grease Seals B R A&KOil ES Oil & Utilized

Greased

Grease Seals Item # 7700060 7700082 7700083 7700085 7700086 7700073 7700240 7700245 7700250 7700255 7700260 7700061 7700071 7700137 7700063 7700075 7700062 7700064 7700065 6050049

Ref# 12192TB 10-9 10-60 10-19 10-10 10-36 SL150 SL175 SL200 SL226 SL275 3150 3149 168233 29031 475380 10-42 10-40 10-41 10-52

Description BT8 Double Lip Grease Seal 2K BT16 Single Lip Grease Seal 2K BT16 Double Lip Grease Seal 2K 84F Double Lip Grease Seal 3.5K - 4.4K 42F Double Lip Grease Seal 5.2K - 7K 42F Double Lip Grease Seal 5.2K - 7K AG Single Lip Seal 1.2K AG Single Lip Seal 2.5K AG Single Lip Seal 3.5K AG Single Lip Seal 4.5K AG Single Lip Seal 6K HADCO-Single Slip Grease Seal HADCO-Single Slip Grease Seal Nitrile / Unique #84 Single Lip Grease Seal Hayes #8 Spindle Grease Seal BTI #79-99 Spindle Grease Seal Mobile Home Single Lip Grease Seal 2.8K Mobile Home Single Lip Grease Seal Mobile Home Single Lip Grease Seal Camshaft Case Single Lip Grease Seal

I.D. 1.249 1.500 1.500 1.719 2.125 2.250 1.500 1.750 2.000 2.250 2.750 1.750 2.000 1.688 1.875 2.375 1.750 1.938 1.938 1.500

O.D. 1.983 1.987 1.987 2.565 3.376 3.376 2.332 2.722 3.066 3.066 3.756 2.356 2.875 2.332 3.000 3.623 2.331 2.510 2.523 1.875

2.250 2.750 2.375 2.875 3.125 4.625 4.733 -

3.376 3.779 3.376 3.880 4.506 6.006 6.000 -

Oil Seals 7700088 7700076 7700089 7700081 7700077 7700079 7700188 7700189

10-63 568303 10-48 10-51 10-56 10-55-1 320-2110 315-1504

Unitized Oil Seal Dexter 5.2K - 7K / Hayes 8K Hayes/Texoma #99 Spindle CR Oil Seal Unitized Double Lip / Double Case Oil Seal 8K - 9K Unitized Oil Seal 9K - 10K General Duty Unitized Oil Seal 10K - 15K Unitized Oil Seal 20K - 25K Stemco Oil Seal 22.5K Stemco Wear Ring 22.5K

WWW.TEXTRAIL.COM

A-90

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & Replacement B R A K E SParts

Replacement Bearings Item #

Ref#

7800015

09067

7800008

LM11949

7800001

1779

7800007

L44643

7800010

L44649

7800027

15123

7800017

14125A

7800028

02475

7800043

LM67048

7800029

2585

7800016

M88048

7800012

LM48548

7800006

L68149

7800013

2788

7800026

25580

7800081

LM603049

7800087

25590

7800009

JM205149

7800014

28580

7800083

JLM506849

7800025

28682

7800024

387A

7800011

45290

7800003

JM511946

7800004

3984

7800084

39590

7800030

HM212049

7800079

LM501310

7800031

HM218248

7800040

395S

7800063 7800065 7800067

31-72-3 31-73-3 31-71-3

Description Bearing Cone for Race 09194 Bearing Cone for Race LM11910 Bearing Cone for Race 1729 Bearing Cone for Race L44610 Bearing Cone for Race L44610 Bearing Cone for Race 15245 Bearing Cone for Race 14276 Bearing Cone for Race 02420 Bearing Cone for Race LM67010 Bearing Cone for Race 2520 Bearing Cone for Race M88010 Bearing Cone for Race LM48510 Bearing Cone for Race L68111 Bearing Cone for Race 2729 Bearing Cone for Race 25520 Bearing Cone for Race LM603011 Bearing Cone for Race 25523 Bearing Cone for Race JM205110 Bearing Cone for Race 28521 Bearing Cone for Race JLM506810 Bearing Cone for Race 28622 Bearing Cone for Race 382A Bearing Cone for Race 45220 Bearing Cone for Race JM511910 Bearing Cone for Race 3920 Bearing Cone for Race 39520 Bearing Cone for Race HM212011 Bearing Cone for Race LM501349 Bearing Cone for Race HM218210 Bearing Cone for Race 394A

Replacement Races I.D. 0.750 0.750 0.938 1.000 1.063 1.25 1.25 1.250 1.250 1.313 1.313 1.375 1.378 1.500 1.750 1.781 1.796 1.969 2.000 2.165 2.250 2.250 2.250 2.559 2.625 2.625 2.625 2.891 3.542 4.331

Item # 7800051 7800046 7800046 7800055 7800056 7800057 7800045 7800058 7800049 7800041 7800050 7800054 7800080 7800033 7800044 7800048 7800082 7800053 7800052 7800039 7800042 7800086 7800075 7800078 7800074 7800005

Ref#

Description 09194 Race for Bearing Cone 09067 LM11910 Race for Bearing Cone LM11949 1729 Race for Bearing Cone 1779 L44610 Race for Bearing Cone L44643 L44610 Race for Bearing Cone L44649 15245 Race for Bearing Cone 15123 14276 Race for Bearing Cone 14125A 02420 Race for Bearing Cone 02475 LM67010 Race for Bearing Cone LM67048 2520 Race for Bearing Cone 2585 M88010 Race for Bearing Cone M88048 LM48510 Race for Bearing Cone LM48548 L68111 Race for Bearing Cone L68149 2729 Race for Bearing Cone 2788 25520 Race for Bearing Cone 25580 LM603011 Race for Bearing Cone LM603049 25523 Race for Bearing Cone 25590 JM205110 Race for Bearing Cone JM205149 28521 Race for Bearing Cone 28580 JLM506810 Race for Bearing Cone JLM506849 28622 Race for Bearing Cone 28682 382A Race for Bearing Cone 387A 45220 Race for Bearing Cone 45290 JM511910 Race for Bearing Cone JM511946 3920 Race for Bearing Cone 3984 39520 Race for Bearing Cone 39590 HM212011 Race for Bearing Cone HM212049 LM501349 Race for Bearing Cone LM501310 MH218210 Race for Bearing Cone MH218248 394A Race for Bearing Cone 395S

O.D. 1.938 1.781 2.240 1.980 1.980 2.441 2.717 2.688 2.328 2.750 2.688 2.563 2.362 3.000 3.265 3.063 3.265 3.543 3.265 3.543 3.844 2.810 4.125 4.331 4.438 4.438 4.813 1.625 5.786 4.331

Nev-R-Lube Bearing Nev-R-Lube 35MM x 64MM x 37MM Bearing Nev-R-Lube 42MM x 76MM x 39MM Bearing Nev-R-Lube 50MM x 84MM x 54MM

WWW.TEXTRAIL.COM

35MM 42MM 50MM A-91

2010 Copyright by TexTrail, Inc.


Ref# TTBK428 14125A 14276 25580 25520 10-36 19-2 5-101 TTBK426 15123 15245 25580 25520 10-36 19-2 5-101 TTBK841 L44649 L44610 L68149 L68111 10-19 19-2 5-101 TTBK844 LM67048 LM67010 L68149 L68111 10-19 19-2 5-101 TTBKBT8 L44643 L44610 12192TB 19-2 5-101 TTBKBT1 L44649 L44610 10-60 19-2 5-101

Description Bearing Kit #42 Spindle 14125A/25580 865 1-Wheel Cone Bearing Race for 14125A Bearing Cone Cone Bearing Race for 25520 Bearing Cone Double Lip Grease Seal 2.25" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit #42 Spindle 15123/25580 655 1-Wheel Cone Bearing Race for 15123 Bearing Cone Cone Bearing Race for 25520 Bearing Cone Double Lip Grease Seal 2.25" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit #84 Spindle L44649/L68149 3.5K 1-Wheel Cone Bearing Race for L44649 Bearing Cone Cone Bearing Race for L68149 Bearing Cone Double Lip Grease Seal 1.719" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit #84 Spindle LM67048/L68149 4.4K 1-Wheel Cone Bearing Race for LM67048 Bearing Cone Cone Bearing Race for L68149 Bearing Cone Double Lip Grease Seal 1.719" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit 1" BT8 Spindle 2K L44643 1-Wheel Cone Bearing Race for L44643 Bearing Cone Double Lip BT8 Grease Seal 1.249" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036" Bearing Kit 1.125" BT16 Spindle 2K L44649 1-Wheel Cone Bearing Race for L44649 Bearing Cone Double Lip BT16 Grease Seal 1.500" ID 1/8" Diameter Cotter Pin 1-3/4" Long Tang Washer 1.01" ID x 1.56" OD x 0.036"

WWW.TEXTRAIL.COM

A-92

AXLES. AXLE ASSEMBLIES & BRAKES

Part # 7800071-01 7800017 7800056 7800026 7800054 7700073 8750003 8750040 7800070-01 7800027 7800055 7800026 7800054 7700073 8750003 8750040 7800059-01 7800010 7800046 7800006 7800041 7700085 8750003 8750040 7800061-02 7800043 7800045 7800006 7800041 7700085 8750003 8750040 7800037-01 7800007 7800046 7700060 8750003 8750040 7800038-01 7800010 7800046 7700083 8750003 8750040

AX L E S , AX L E A S S E M B L I E S & Bearing KitsB R A K E S

Qty 1 1 1 1 1 1 1

1.125 2.717 1.750 3.265 3.376

1 1 1 1 1 1 1

1.125 2.441 1.750 3.265 3.376

1 1 1 1 1 1 1

1.063 1.980 1.378 2.362 2.565

1 1 1 1 1 1 1

1.250 2.328 1.378 2.362 2.565

2 2 1 1 1

1.000 1.980 1.983

2 2 1 1 1

1.063 1.980 1.987

7800059-01

7800071-01

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BGrease R ACaps KES

Part # 7700025-01 7700186-01 7700016-01 7700027-01 7700018-01 7700270 7700024 7700025 7700026 7700275 7700016 7700027 7700018 7700186 7700019 7700280 7700200 7700021 7700022 7700053

Ref # TTGC200 TTGC272 TTGC246 TTGC245 TTGC273 1527 21-3 21-3-1 21-41-2 1604 21-43-1 21-1 21-43-1 21-39 21-43-3 1609 1602 568124 092105 85-1

Description 2-each Drive-in Grease EZ-Lube Caps with Plugs 2-each Drive-in Grease Standard Caps with Plugs 2-each Drive-in Grease EZ-Lube Caps with Plugs 2-each Drive-in Grease Standard Caps with Plugs 2-each Drive-in Grease EZ-Lube Caps with Plugs Drive-in Grease AG Cap Drive-in Grease Standard Cap Drive-in Grease EZ-Lube Cap Drive-in Grease EZ-Lube Cap - Chrome Drive-in Grease AG Cap Drive-in Grease EZ-Lube Cap Drive-in Grease Standard Cap Drive-in Grease EZ-Lube Cap Drive-in Grease Standard Cap Drive-in Grease EZ-Lube Cap - Chrome Drive-in Grease AG Cap Drive-in Grease AG Cap Drive-in Grease Standard Cap Drive-in Grease Standard Cap Plug for Drive-In EZ-Lube Grease Caps

Part # 7700029-01 7700030-01 7700215-02 7700029 7700030 7700215 7700178 7700055 7700054 7700216 7700035 7700052 7700051 7700028 7700023 7700122 7700169 7700057

Ref # TTOC261 TTOC373 TTOC374 21-35 21-36 21-88 21-38-2 10-45 10-50 10-163 71-124 46-32 46-52 K363587 K568220 568298 568297 568223

Description Oil Cap Kit with O-Ring & Plug 6K - 8K & 9K (Pre-10/1989) Oil Cap Kit with O-Ring & Plug 9K (Post-10/1989) - 15K 2-Piece H-D Oil Cap Kit with O-Ring & Plug 9K - 10K General Duty 1-Piece H-D Dexter Oil Cap 6K - 8K & 9K (Pre-10/1989) Dexter Oil Cap 9K (Post-10/1989) - 15K 2-Piece H-D Dexter Oil Cap 9K - 10KGD 1-Piece H-D Dexter Bolt-On Oil Cap with Vent plug 20K-25K Dexter O-Ring for Oil Cap 6K - 8K & 9K (Pre-10/1989) Dexter O-Ring for Oil Cap 9K (Post-10/1989) - 15K 2-Piece H-D Dexter O-Ring for Oil Cap 9K - 10KGD 1-Piece H-D Dexter Gasket for Bolt-On Oil Cap with Vent plug 20K-25K Dexter Plug for Oil Cap Dexter Oil Fill Hole Plug for 8K - 15K AL-KO Oil Cap Kit with O-Ring, Gasket & Plug 7K - 8K AL-KO Oil Cap Kit with O-Ring, Gasket & Plug 10KGD - 16K AL-KO Gasket for Oil Cap 8K AL-KO Gasket for Oil Cap 10KGD - 16K AL-KO Plug for Oil Cap 7K - 16K

Part # 7600100 7600101 7600102 7600103 7600104 7600105 7600108 7600112 7600109 7600110 7600111 7600107 7600106

Ref # 295EZ 319EZ 328EZ 425EZ 482EZ 512EZ 319SS 328SS 425SS 482SS 512SS CCCP BCCP

O.D. 1.986 1.986 2.450 2.450 2.720 1.957 1.986 1.986 1.986 2.440 2.450 2.450 2.720 2.720 2.720 3.125 3.250 3.355 3.625 3.625

Oil Caps

Center Caps Description Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Replacement Chrome ABS Plug Replacement Black ABS Plug

WWW.TEXTRAIL.COM

A-93

Fits Pilot Hole

Wheel Lugs

2.950" 3.190" 3.280" 4.250" 4.820" 5.120" 3.190" 3.280" 4.250" 4.820" 5.125"

4 4 5 5 or 6 8 8 5 5 5 or 6 8 8

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES

A = Thread Diameter B = Stud Length C =Spline Length D =Base Length E = Spline Diameter

Press-In Wheel Studs Part#

Ref #

Description 6450565 LB169 Press-In Stud Yellow Zinc Grade 8 6450739 LB20 Press-In Stud Yellow Zinc Grade 8 6450835 LB25 Press-In Stud Silver Zinc Grade 8 7700092 363909 Press-In Stud Black Oxide Grade 8 7700095 363908 Press-In Stud Black Oxide Grade 8 7700100 108006 Press-In Stud Steel Grade 8 7700102 9251513 Press-In Stud Black Oxide Grade 8 Alko/Hayes 7700105 108007 Press-In Stud Steel Grade 8 7700106 090737 Press-In Stud Black Oxide Grade 8 D-Head Alko/Hayes 7700107 7-115 Press-In Stud Phosphate Coated Grade 8 7700108 09077115 Press-In Stud Black Oxide Grade 8 Alko/Hayes 7700109 7-122 Press-In Stud Steel Grade 8 7700112 7-132 Press-In Stud Steel Grade 8 7700123 7-223 Press-In Stud Steel Grade 8 7700133 7-246 Press-In Stud Steel Grade 8 7700142 7-262 Press-In Stud Phosphate Coated Grade 8 7700144 7-185 Press-In Stud Steel Grade 8 7700145 7-224 Press-In Stud Phosphate Coated Grade 8 7700156 7-232 Press-In Stud Phosphate Coated Grade 8 7700159 7-150 Press-In Stud Steel Grade 8 7700171 7-194 Press-In Stud Phosphate Coated Grade 8 for Steel Whls 7700184 7-195 Press-In Stud Phosphate Coated Grade 8 for Aluminum Whls 7700217 7-257 Press-In Stud Silver Zinc Grade 8

A

B

C

D

E

1/2"-20 1/2"-20 9/16"-18 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 5/8"-18 5/8"-18 3/4"-16 1/2"-20 9/16"-18 9/16"-18 1/2"-20 1/2"-20 1/2"-20 5/8"-18 5/8"-18 1/2"-20 M22 x 1-1/2-6 M22 x 1-1/2-6 9/16"-18

1.1875 2.00 2.50 2.50 1.81 2.375 3.25 2.75 3.00 3.16 3.00 1.84 2.30 2.30 1.80 2.50 1.64 2.50 2.75 2.09 3.94 4.79 2.50

0.38 0.38 0.63 0.68 0.26 0.65 0.58 0.79 0.58 0.56 0.43 0.39 0.31 0.31 0.26 0.56 0.36 0.71 0.31 0.40 0.63 0.63 0.56

0.52 0.52 1.10 1.38 0.52 0.85 1.40 0.97 0.80 1.00 1.46 0.73 1.06 0.77 0.62 1.42 0.52 1.15 1.00 0.72 1.25 1.25 1.06

0.545 0.545 0.618 0.540 0.540 0.610 0.670 0.650 0.680 0.690 0.810 0.610 0.690 0.690 0.545 0.545 0.617 0.690 0.690 0.617 0.970 0.970 0.689

1

2

A = Thread Diameter B = Overall Length C =Lug Nut End Length D = Hub End Length Double Threaded Ends Screw-In Wheel Studs Part#

Ref #

Description A B 7700097 25-53-1 Wheel Stud Yellow Zinc Grade 8 1/2 2.00 7700090 25-11 Wheel Stud Phosphate Coated Grade 8 9/16 3.06 7700110 25-45 Wheel Stud Phosphate Coated Grade 8 5/8 2.50 7700111 25-59 Wheel Stud Phosphate Coated Grade 8 9/16 & 5/8 2.94 6450242 25-14 Rotor Stud Phosphate Coated Grade 8 1/2 2.53 7700104 25-13-1 RH Wheel Stud Phosphate Coated Grade 8 3/4 2.44 7700103 25-13-2 LH Wheel Stud Phosphate Coated Grade 8 3/4 2.44 NOTE: 25-53-1 replaces obsolete 25-53 WWW.TEXTRAIL.COM

A-94

C

D

0.7700 1.5625 1.3200 0.350 1.200 1.200

1.140 0.750 0.800 1.200 1.200 1.200

1/2"-20 Fine 1/2"-20 Fine 9/16"-18 Fine 9/16"-12 Coarse 5/8"-18 Fine 5/8"-11 Coarse 9/16"-18 Fine 5/8"-11 Coarse 1/2"-20 Fine 1/2"-13 Coarse 3/4"-16 Fine 3/4"-10 Coarse 3/4"-16 Fine 3/4"-10 Coarse

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES

A = Head Size B = Thread Length C = Thread Diameter Wheel Bolts Part#

Ref #

7700008

7-40

7700295

LB509

7700120

7-84

7700006

7-36

9000025

363896

Part#

Ref #

7700034

6-58

7700036

6-53

7700037

STN569

7700041

6-70-1

7700042

6-70-2

7700043

6-98

7700044

1904

7700045

6-80

7700046

6-69-2

7700047

6-69-1

7700048

6-109

7700172

6-118

7700201

3010

Description Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc Screw-In Hex Head Wheel Bolt Grade 5 Zinc

A

B

C

Thread

Type

1/2"-20

0.880

0.080

Fine

60° Cone

1/2"-20

0.875

0.813

Fine

90° Cone

9/16"-18

1.120

0.875

Fine

90° Cone

1/2"-13

1.270

0.860

Coarse

Flat Head

1/2"-13

1.875

0.875

Coarse

Flat Head

Finish

Size

Grade

Type

Image

Zinc

5/8"-18

8

Flange

5

Zinc

9/16"-18

5

60° Cone

4

Zinc

9/16"-18

5

90° Cone

4

Gold Zinc

1-1/8"-16

5

Dual Whl

3

Gold Zinc

1-1/8"-16

5

Dual Whl

3

Stainless Stl

1/2"-20

5

60° Cone

2

Wheel Nuts

7700202

1904L

7700285

STN509

7700290

STN629

8200220

20405

Description Wheel Nut Wheel Nut Wheel Nut RH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD LH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Capped Wheel Nut Acorn Hex Wheel Nut Wheel Nut LH Inner Dual Wheel Nut 3/4" Inner Thread / 1-1/8" Outer Thread RH Inner Dual Wheel Nut 3/4" Inner Thread / 1-1/8" Outer Thread Wheel Nut Wheel Nut 2-Piece Metric Acorn Duplex Hex Wheel Nut Acorn Hex Bulge 1.75" Long Wheel Nut Wheel Nut Wheel Nut Locking Wheel Nut with 3/4" Socket Key

Item #

Part#

Ref #

3

7700148

25-56-1

3

7700149

25-56-2

4

9000139

6-47

1

7700041

6-70-1

1

7700042

6-70-2

7700046

6-69-2

Chrome

1/2"-20

5

60° Cone

Zinc

1/2"-20

5

60° Cone

4

Yellow Zinc

3/4"-16

5

Dual Whl

6

Yellow Zinc

3/4"-16

5

Dual Whl

6

Zinc

5/8"-18

8

90° Cone

4

Hardened Alloy

M22x1.5-6

5

Flange

5

Chrome

9/16"-18

5

60° Cone

Chrome

1/2"-20

5

60° Cone

Zinc

1/2"-20

5

90° Cone

4

Zinc

5/8"-18

5

90° Cone

4

EC

1/2"-20

8

Locking Nut

7

A 3/4"-16 3/4"-16

B 4.10 4.10

C 1.34 1.34

D 1.35 1.35

1-1/8"-16 1-1/8"-16 1-1/8"-16 1-1/8"-16 Stud Lngth

1.50 1.50 Knurl Lngth

Base Lngth

Knurl Dia

3.94

0.63

1.25

0.970

4.79

0.63

1.25

0.970

Heavy Duty Axle - Wheel Mounting Hardware

2

2 Item # ns

7700047 6-69-1 Part# Ref # 7030108

5-102

ns

7700172

6-118

ns

7700171

7-194

ns

7700184

7-195

Description RH Screw-In Stud Phosphate Coated Grade 8 LH Screw-In Stud Phosphate Coated Grade 8 3/4"-16 Grade C Hex Lock Nut 0.88" Width x 1.12" OD RH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Gold Zinc LH Outer Dual Cone Wheel Nut 0.88" Width x 1.50" OD Gold Zinc LH Inner Dual Wheel Nut 3/4"-16 Inner Thread Yellow Zinc RH Inner Dual Wheel Nut 3/4"-16 Inner Thread Yellow Zinc Description Thread Dia 3/4" Flat Washer M22 x 1-1/2"-6 Wheel Nut 2-Piece Metric Flange Type Hardened Alloy M22 x 1-1/2"-6 Press-In Stud Phosphate Coated Grade 8 for Stl Whls M22 x 1-1/2"-6 Press-In Stud Phosphate Coated Grade 8 for Alum Whls

WWW.TEXTRAIL.COM

A-95

2010 Copyright by TexTrail, Inc.


AXLES. AXLE ASSEMBLIES & BRAKES

AX L E S , AX L E A S S E M B L I E S & BRAKES

Retaining Rings & Rim Clamps Part#

Ref #

Description

7700033

33-52-1

Wheel Retaining Ring for use with 5/8"-18 Nut (TT PN# 7700048)

7700160

568348

Wheel Retaining Ring for use with 5/8"-18 Nut (TT PN# 7700048)

7700058

15-2

Rim Clamp UTG & MH Style 14.5

9000152

916N

Hex Nut 9/16"-18 for use with Rim Clamp

Bearing Protectors Part#

Ref #

Description

Use On

7700121

1980

Bearing Protector 1.98" with Cap

3.5K

7700121-02

1980-02

Bearing Protector 1.98" with Cap (2ea)

3.5K

7700004

2441

Bearing Protector 2.441"

5.2K

6-Bolt

7700005

2717

Bearing Protector 2.717"

5.2K-7K

8-Bolt

7700003

BB1980

Vinyl Cap for 1.980” Bearing Protector

3.5K

7700002

BB2441

Vinyl Cap for 2.441” Bearing Protector

5.2K

TexTrail Packaged Wheel Parts Part#

Ref #

Description

Qty

Size

Length

Type

7700058-01

TTRC145

Rim Clamp UTG & MH Style

5

7700008-01

TTSD125

Screw-In Wheel Bolts

4

1/2"-20

0.88

60° Cone

7700120-01

TTSD916

Screw-In Hex Head Wheel Bolts Grade 5 Zinc

4

9/16"-18

1.12

90° Cone

7700036-01

TTWN916

Wheel Nut Grade 5 Zinc

4

9/16"-18

60° Cone

7700045-01

TTWN120

Wheel Nut Grade 5 Zinc

6

1/2"-20

60° Cone

7700048-01

TTWN580

Wheel Nut Grade 8 Zinc

4

5/8"-18

90° Cone

8200220-01

TTWL120

Locking Wheel Nut with 3/4" Socket Key EC*

1

1/2"-20

60° Cone

7700107-01

TTSD584

Press-In Wheel Stud

4

5/8"-18

3.16

7700109-01

TTSD124

Press-In Wheel Stud

4

1/2"-20

1.84

* EC Finished -24-hour salt spray tested

WWW.TEXTRAIL.COM

A-96

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Table of Contents - Suspensions Single Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs 9,000 lb 2" Slipper Springs 10,000 lb General Duty 2-1/2" Slipper Spring 7/8" Eye Tandem Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 3,500 lb - 8,000 lb 2" Slipper Springs Combination Hanger Kits 3,500 lb - 8,000 lb 2" Slipper Springs Triple Axle Hanger Kits 2,000 lb - 7,000 lb 1.75" Double Eye Springs 3,500 lb - 8,000 lb 2" Slipper Springs 3,500 lb - 8,000 lb 2" Slipper Springs 9,000 lb 2" Slipper Springs 10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Dry) 10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs Heavy Duty Suspension System Air Suspension System Springs and Accessories Bushings Double Eye Springs Equalizers Hangers Marine U-Bolts Packaged U-Bolts Round U-Bolts Shackle Straps Slipper Springs Spring and U-Bolt Kits Springs Spring and U-Bolt Kits Double Eye Springs Slipper Springs Square U-Bolts Suspension Hardware Tie Bolts Tie Plates U-Bolt Hardware U-Bolt Kits WWW.TEXTRAIL.COM

B-1

B-2 B-3 B-11 B-13 B-4 B-6 B-7 B-8 B-9 B-6 B-11 B-13 B-14 B-15 B-16 B-27 B-29 B-30 B-20 B-19 B-25 B-24 B-23 B-23 B-22 B-20 B-19 B-18 B-18 B-19 B-19 B-23 B-26 B-21 B-21 B-22 B-18 2010 Copyright by TexTrail, Inc.


SUSPENSIONS Single Axle Double Eye Spring Hanger Kits

SUSPENSIONS

APS1 Item 1 2 3 4 5

Part # 9000122 9000127 9000164 9000147 9000030 APS2

Item 1 2 3 4 5

Part # 9000122 9000123 9000223 9000147 9000030 APS3

Item 1 2 3 4 5

Part # 9000122 9000123 9000164 9000147 9000030 APS4

Item 1 2 3 4 5

Part # 9000113 9000123 9000164 9000147 9000030 APS5

Item 1 2 3 4 5

Part # 9000113 9000127 9000164 9000147 9000030

9100063 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 3.5K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top 30-20 2 Rear Hanger 0.91" Center Hole to Top w/ Bushing SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100116 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 3.5K) Ref # Qty Description HR07F 2 Hanger 1.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top 115052 4 Shackle Strap 2.625" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100013 Single Axle Hanger Kits - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description 115917 2 Hanger 1.25" Center Hole to Top 115980 2 Rear Hanger 1.187" Center Hole to Top 115208 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100071 Single Axle Hanger Kits - 1.75" Double Eye Springs (3.5K) Ref # Qty Description 28-5 2 Hanger 3.25" Center Hole to Top HR06F 2 Rear Hanger 1.187" Center Hole to Top SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3” 9100117 Single Axle Hanger Kits - 1.75" Double Eye Springs (3.5K) Ref # Qty Description 28-5 2 Hanger 3.25" Center Hole to Top 30-20 2 Rear Hanger 0.91" Center Hole to Top w/ Bushing SL04B 4 Shackle Strap 3.125" Center Hole to Top 1.250" Wide 6-7 6 Shackle Nut 9/16”-18 7-3 6 Shackle Bolt 9/16”-18 x 3”

WWW.TEXTRAIL.COM

B-2

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Single Axle Slipper Spring Hanger Kits

Item 1 2 3 4

APS3SE 9100007 Single Axle Hanger Kits - 1.75" Slipper Springs (2K - 3.5K) Part # Ref # Qty Description 9000122 115917 2 Hanger 1.25" Center Hole to Top 9000099 115706S 2 Hanger C-Clip 9000030 7-3 2 Shackle Bolt 9/16"-18 x 3" 9000147 6-7 2 Shackle Nut 9/16"-18

APS6SE Item 1 2 3 4

Part # 9000105 9000106 9000031 9000147

9100018 Single Axle Hanger Kits - 2" Slipper Springs (2K - 8K) Ref # Qty Description 721584 2 Front Slipper Hanger 3.625" Tall 4" HD 721585 2 Rear Slipper Hanger 5" Tall 7-17 4 Shackle Bolt 9/16"-18 x 3.5" 6-7 4 Shackle Nut 9/16"-18

WWW.TEXTRAIL.COM

B-3

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Tandem Axle Double Eye Spring Hanger Kits

SUSPENSIONS

APT1 Item 1&3 2 4 5 6 7

Part # 9000128 9000129 9000088 9000223 9000030 9000147 9000004 9000140 9000132 8750003 APT3

Item 1&3 2 4 5 6 7

Item 1&3 2 4 5 6 7

Part # 9000128 9000122 9000090 9000223 9000030 9000147

9100064 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt EQR83 2 Equalizer 8" Straight; 3/4" Center; 9/16" End Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 12 9/16"-18 x 3" Long Shackle Bolt 6-7 12 9/16"-18 Shackle Bolt Lock Nut 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 165093 2 3/4"-16 Equalizer Castle Nut 1610 2 Grease Zerk 1/8"-27 MPT 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100041 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 2 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR07F 4 Hanger 1.25" Center Hole to Top E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut

APT3-HD 9100043 Tandem Axle Heavy Duty Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Part # Ref # Qty Description 9000128 HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL 9000129 HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt 9000089 EQE34 2 Equalizer 7.75" Straight; 3/4" Center; 9/16" End Holes 9000223 SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 9000030 7-3 12 9/16"-18 x 3" Long Shackle Bolt 9000147 6-7 12 9/16"-18 Shackle Bolt Lock Nut 9000004 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 9000140 165093 2 3/4"-16 Equalizer Castle Nut 9000132 1610 2 Grease Zerk 1/8"-27 MPT 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long WWW.TEXTRAIL.COM

B-4

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Tandem Axle Double Eye Spring Hanger Kits

SUSPENSIONS

APT4 Item 1&3 2 4 5 6 7

Part # 9000128 9000129 9000067 9000223 9000030 9000147 9000004 9000140 9000132 8750003 APT5

Item 1-3 4 5 6 7

Part # 9000113 9000090 9000223 9000030 9000147 APT5-LE

Item 1-3 5 6 7

Part # 9000113 9000164 9000030 9000147 APT5-AS

Item 1-3 4 5 6 7

Part # 9000113 9000090 9000163 9000030 9000147

9100060 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR08F 4 Center Hanger 2.44" Center Hole 9/16" Hole 3.1" OAL HR34F 2 Center Hanger 5.438" Tall for 3/4" Bolt EQ458 2 Equalizer 6.25" Radius 3/4" Center; 9/16" End Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 12 9/16"-18 x 3" Long Shackle Bolt 6-7 12 9/16"-18 Shackle Bolt Lock Nut 126A1LN 2 3/4"-16 x 3.50" Long Wet Equalizer Bolt 165093 2 3/4"-16 Equalizer Castle Nut 1610 2 Grease Zerk 1/8"-27 MPT 19-2 2 Cotter Pin 1/8" x 1.75" Long 9100061 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL16B 8 Shackle Strap 2.625" Center Hole x 1.25" Wide 3.9" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut 9100061-03 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall SL04B 8 Shackle Strap 3.125" Center Hole x 1.25" Wide 4.405" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut 9100061-04 Tandem Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description HR03F 6 Hanger 3.25" Tall E1 2 Equalizer 7.75" Curved X 2.875" Wide 9/16" Holes SL02B 8 Shackle Strap 2.25" Center Hole x 1.25" Wide 3.530" OAL 7-3 14 9/16"-18 x 3" Long Shackle Bolt 6-7 14 9/16"-18 Shackle Bolt Lock Nut

WWW.TEXTRAIL.COM

B-5

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Tandem Axle Slipper Spring Hanger Kits

Item 1 2 3 4 5 6 7 8 ns

APT6SE-LD 9100073-03 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Boxed Kit Part # Ref # Qty Description 9000105-02 HR25F 2 Front Slipper Hanger 3.625" Tall 9000106-02 HR26W 2 Rear Slipper Hanger 5" Tall 9000100-02 HR27F 2 Center Slipper Hanger 3.38" Tall 9000272 E4541 2 Equalizer 2" Wide X 12" Long 9000031 717 8 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 8 9/16"-18 Shackle Bolt Lock Nut 9000017 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 9000146 6-3 2 7/8"-9 Castle Nut 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long

Item 1 2 3 4 5 6 7 8 ns

APT6SE-MD 9100020 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Boxed Kit Part # Ref # Qty Description 9000105 721584 2 Front Slipper Hanger 3.625" Tall 9000106 721585 2 Rear Slipper Hanger 5" Tall 9000100 721586 2 Center Slipper Hanger 3.38" Tall 9000272 E4541 2 Equalizer 2" Wide X 12" Long 9000031 717 8 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 8 9/16"-18 Shackle Bolt Lock Nut 9000017 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 9000146 6-3 2 7/8"-9 Castle Nut 8750003 19-2 2 Cotter Pin 1/8" x 1.75" Long APT6SE-HD

Item 1 2 3 4 5 6 7 8 ns

Part # 9000105 9000106 9000100 9000070 9000031 9000147 9000017 9000146 8750003

9100020-02 Tandem Axle Hanger Kits - 2" Slipper Springs (3.5K - 8K) Bulk Kit Ref # Qty Description 721584 2 Front Slipper Hanger 3.625" Tall 721585 2 Rear Slipper Hanger 5" Tall 721586 2 Center Slipper Hanger 3.38" Tall E5541 2 Equalizer 2" Wide X 12" Long 717 8 9/16"-18 x 3.5" Shackle Bolt 6-7 8 9/16"-18 Shackle Bolt Lock Nut 7845B 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 6-3 2 7/8"-9 Castle Nut 19-2 2 Cotter Pin 1/8" x 1.75" Long

WWW.TEXTRAIL.COM

B-6

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Combination Slipper Spring Hanger Kits

SUSPENSIONS

H202-AP202 Part # 9000291 9000290 9000292 9000094 9000020 9000143 9000031 9000147 9000016 9000145

9100119 Tandem Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Ref # Qty Description 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole 29-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-28 2 Rear Slipper Hanger 5.72" Tall 5.25" Top to Center Hole 5/16" 13-4 2 Equalizer Bullnose 33.5" Axle Spacing with Center Bushing 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 6-11 4 5/16"-18 Spring Retainer Nut 7-17 4 9/16"-18 x 3.5" Shackle Bolt 6-7 4 9/16"-18 Shackle Bolt Lock Nut 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 6-111 2 7/8"-9 Castle Nut

Part # 9000291 9000290 9000292

HGR-202* Tandem Axle Hanger Kit - 2" Slipper Springs (3.5K - 7K) Ref # Qty Description 28-1 2 Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole 29-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-28 2 Rear Slipper Hanger 5.72" Tall 5.25" Top to Center Hole 5/16"

Item 1 2 3

Part # 9000119 9000170 9000121

HRG-238* Tandem Axle Hanger Kit - 2" Slipper Springs (7.2K - 8K) Ref # Qty Description 28-9-1 2 Front Slipper Hanger 5" Top to Center Hole 29-5-1 2 Center Slipper Hanger 4.5" Tall 3.5" Top to Center Hole 30-6-1 2 Rear Slipper Hanger 6.38" Top to Center Hole

Item 4 5 6 7 8 9 10

A/P-202* Tandem Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 33.5" Axle Spacing Part # Ref # Qty Description 9000094 13-4 2 Equalizer Bullnose 13.125" OAL with Center Bushing 9000020 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 9000143 6-11 4 5/16"-18 Spring Retainer Nut 9000031 7-17 4 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 4 9/16"-18 Shackle Bolt Lock Nut 9000016 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 9000145 6-111 2 7/8"-9 Castle Nut

Item 1 2 3 4 5 6 7 8 9 10

Item 1 2 3

Item 4 5 6 7 8 9 10

A/P-216* Tandem Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 36" Axle Spacing Part # Ref # Qty Description 9000092 13-44 2 Equalizer Bullnose 13.125" OAL with Center Bushing & Slipper Pad 9000020 7-7 4 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 9000143 6-11 4 5/16"-18 Spring Retainer Nut 9000031 7-17 4 9/16"-18 x 3.5" Shackle Bolt 9000147 6-7 4 9/16"-18 Shackle Bolt Lock Nut 9000016 7-1-1 2 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk less Cotter Hole 9000145 6-111 2 7/8"-9 Castle Nut * HGR-202 or HGR 238 is to be used with A/P-202 or A/P-216 for a complete Hanger Kit

WWW.TEXTRAIL.COM

B-7

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Triple Axle Double Eye Spring Hanger Kits

APTT3 Item 1 2 3 4 5 6

Part # 9000090 9000113 9000122 9000223 9000030 9000147 APTT5

Item 1 2-3 4 5 6

Part # 9000090 9000113 9000164 9000030 9000147

9100016 Triple Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description E1 4 Equalizer Cast 2.875" Tall x 7.75" Long 9/16" Holes HR03F 4 Hanger 3" Top to Center Hole 3.625" Tall 9/16" Holes HR07F 4 Hanger 1.25" Top to Center Hole 2.010" Tall 9/16" Holes SL16B 16 Shackle Strap 2.625" Hole Centers 3.905" Tall x 1.25" W 9/16" Holes 7-3 24 9/16"-18 x 3" Shackle Bolt 6-7 24 9/16"-18 Shackle Lock Nut 9100017 Triple Axle Hanger Kit - 1.75" Double Eye Springs (2K - 7K) Ref # Qty Description E1 4 Equalizer Cast 2.875" Tall x 7.75" Long 9/16" Holes HR03F 8 Hanger 3" Top to Center Hole 3.625" Tall 9/16" Holes SL04B 16 Shackle Strap 3.125" Hole Centers 4.405" Tall x 1.25" W 9/16" Holes 7-3 24 9/16"-18 x 3" Shackle Bolt 6-7 24 9/16"-18 Shackle Lock Nut

WWW.TEXTRAIL.COM

B-8

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Triple Axle Slipper Spring Hanger Kits

SUSPENSIONS

APTT6SE-LD Item 1 2 3 4 5 6 7 8 ns

Part # 9000272 9000105-02 9000106-02 9000100-02 9000017 9000146 9000031 9000147 8750003

9100021-04 Light Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Ref # E4541 HR25F HR26W HR27F 7845B 6-3 7-17 6-7 19-2

Qty 4 2 2 4 4 4 12 12 4

Description Equalizer 2.25" W x 12"L with Nylon Bushing Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long

APTT6SE-MD 9100021-03 Medium Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Item 1 2 3 4 5 6 7 8 ns

Part # 9000272 9000105 9000106 9000100 9000017 9000146 9000031 9000147 8750003

Ref # E4541 721584 721585 721586 7845B 6-3 7-17 6-7 19-2

Qty 4 2 2 4 4 4 12 12 4

Description Equalizer 2.25" W x 12"L with Nylon Bushing Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long

APTT6SE-HD 9100021 Heavy Duty Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Item 1 2 3 4 5 6 7 8 ns

Part # 9000070 9000105 9000106 9000100 9000017 9000146 9000031 9000147 8750003

Ref # E5541 721584 721585 721586 7845B 6-3 7-17 6-7 19-2

WWW.TEXTRAIL.COM

Qty 4 2 2 4 4 4 12 12 4

Description Equalizer 2" W x 12"L Heavy Duty Front Slipper Hanger 3.625" Tall Rear Slipper Hanger 5" Tall Center Slipper Hanger 3.38" Tall 7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk & Cotter Hole 7/8"-9 Castle Nut 9/16"-18 x 3.5" Shackle Bolt 9/16"-18 Shackle Bolt Lock Nut Cotter Pin 1/8" x 1.75" Long B-9

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

3.5K - 8K 2� Slipper Spring Hanger Kits

HGR-302* Triple Axle Hanger Kit - 2" Slipper Springs (3.5K - 8K) Item

Part #

Ref #

Qty

Description

1

9000291

28-1

2

Front Slipper Hanger 4.88" Tall 4.25" Top to Center Hole x 2" Wide

2

9000290

29-1

4

Center Slipper Hanger 4.50" Tall 3.50" Top to Center Hole x 2" Wide

3

9000292

30-28

2

Rear Slipper Hanger 5.72" Tall 525" Top to Center Hole x 2" Wide

A/P-302* Triple Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 33.5" Axle Spacing Item

Part #

Ref #

Qty

Description

4

9000094

13-4

4

Equalizer Bullnose 13.125" OAL with Center Bushing

5

9000031

7-17

6

9/16"-18 x 3.5" Shackle Bolt

6

9000147

6-7

6

9/16"-18 Shackle Bolt Lock Nut

7

9000016

7-1-1

4

7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk Less Cotter Hole

8

9000145

6-111

4

7/8"-9 Grade B Castle Nut

9

9000020

7-7

6

5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt

10

9000143

6-11

6

5/16"-18 Spring Retainer Nut

A/P-316* Triple Axle Attaching Parts - 2" Slipper Springs (3.5K - 8K) 36" Axle Spacing Item

Part #

Ref #

Qty

Description

4

9000092

13-44

4

Equalizer Bullnose 13.125" OAL with Central Bushing & Slipper Pad

5

9000031

7-17

6

9/16"-18 x 3.5" Shackle Bolt

6

9000147

6-7

6

9/16"-18 Shackle Bolt Lock Nut

7

9000016

7-1-1

4

7/8"-9 x 4.625" Long Wet Equalizer Bolt with Zerk Less Cotter Hole

8

9000145

6-111

4

7/8"-9 Grade B Castle Nut

9

9000020

7-7

6

5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt

10

9000143

6-11

6

5/16"-18 Spring Retainer Nut

* HGR-302 is to be used with A/P-302 or A/P-316 for a complete Hanger Kit

WWW.TEXTRAIL.COM

B-10

2010 Copyright by TexTrail, Inc.


SUSPENSIONS 9K 2� Slipper Spring Hanger Kits

SUSPENSIONS

HAP-105-00 Item 1 2 5 6 ns ns

Part # 9000120 9000118 9000021 9000020 9000144 9000143

9100011 Single Axle Hanger Kit - 2" Slipper Springs (9K) Ref # 28-68-4 30-68-1 7-181 7-7 6-38 6-11

Qty 2 2 2 2 2 2

Description Front Hanger 5" Tall Rear Hanger 4.85" Tall 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut

HAP-205-01 9100008 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 38" Axle Spacing Item 3 4 5 6 7 ns ns ns

Part # 9000117 9000072 9000021 9000020 9000019 9000144 9000143 9000136

Ref # 29-39-4 13-117-3 7-181 7-7 7-182 6-38 6-11 6-112

WWW.TEXTRAIL.COM

Qty 2 2 2 2 2 2 2 2

Description Center Hanger 4.5" Tall Equalizer 2" Slipper Spring 38" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut

B-11

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

9K 2” Slipper Spring Hanger Kits Continued

HAP-205-02 Item 3 4 5 6 7 ns ns ns

Part # 9000117 9000071 9000021 9000020 9000019 9000144 9000143 9000136

Ref # 29-39-4 13-118-3 7-181 7-7 7-182 6-38 6-11 6-112

HAP-205-03 Item 3 4 5 6 7 ns ns ns

Part # 9000117 9000073 9000021 9000020 9000019 9000144 9000143 9000136

9100009 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 42.25" Axle Spacing Qty 2 2 2 2 2 2 2 2

Description Front Hanger 4.5" Tall Equalizer 2" Slipper Spring 42.25" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut

9100010 Multi-Axle Hanger Kit - 2" Slipper Springs (9K) 48.50" Axle Spacing Ref # 29-39-4 13-119-3 7-181 7-7 7-182 6-38 6-11 6-112

Qty 2 2 2 2 2 2 2 2

Description Front Hanger 4.5" Tall Equalizer 2" Slipper Spring 42.25" Spacing with Rubber Bushing 5/8"-11 x 4" Grade 5 Spring Eye Bolt 5/16"-18 x 3.25" Grade 2 Spring Retainer Bolt 1"-8 x 5" Grade 5 Equalizer Center Bolt 5/8"-11 Grade B Spring Eye Hex Lock Nut 5/16"-18 Grade A Spring Retainer Hex Lock Nut 1"-8 Grade B Equalizer Hex Lock Nut

9K Axle Assembly Spacing Single Tandem Triple

38” (1) 9100011 (1) 9100011 (1) 9100008 (1) 9100011 (2) 9100008

WWW.TEXTRAIL.COM

42.25" (1) 9100011 (1) 9100011 (1) 9100009 (1) 9100011 (2) 9100009 B-12

2010 Copyright by TexTrail, Inc.


SUSPENSIONS 10K GD 2-1/2” Slipper Spring Hanger Kits (7/8” Eye)

SUSPENSIONS

HAP-157-00 9100065 Single Axle Hanger Kit - 2-1/2" Slipper Springs 7/8" Eye Bolts (10K GD) Item 1 1 2 5 ns

Part # 9000265 9000264 9100072-02 9000034 9000145

Ref # 28-72-1 28-73-1 30-61-1 7-260-2 6-111

Qty 1 1 2 2 2

Description Left Hand Front Hanger 5.25" Tall 7/8" Eye Bolt Hole Right Hand Front Hanger 5.25" Tall 7/8" Eye Bolt Hole Rear Hanger 5-1/2" Tall 5/16" Bolt Hole 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut

HAP-257-01 9100070 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 38" Axle Spacing Item 3 4 4 5 ns 6 ns

Part # 9000108 9000266 9000267 9000034 9000145 9000009 9000136

Ref # 29-33 13-132-2 13-132-2 7-260-2 6-111 7-136-2 6-112

Qty 2 1 1 2 2 2 2

Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 38" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 38" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut

HAP-257-02 9100069 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Item 3 4 4 5 ns 6 ns

Part # 9000108 9000268 9000267 9000034 9000145 9000009 9000136

Ref # 29-33 13-134-2 13-135-2 7-260-2 6-111 7-136-2 6-112

Qty 2 1 1 2 2 2 2

Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 42.25" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 42.25" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut

HAP-257-03 9100066 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 48.5" Axle Spacing Item 3 4 4 5 ns 6 ns

Part # 9000108 9000270 9000271 9000034 9000145 9000009 9000136

Ref # 29-33 13-136-2 13-137-2 7-260-2 6-111 7-136-2 6-112

Qty 2 1 1 2 2 2 2

Description Center Hanger 4.44" Tall Left Hand Equalizer 2-1/2" Slipper Spring 48.5" Spacing 7/8" Bolt Right Hand Equalizer 2-1/2" Slipper Spring 48.5" Spacing 7/8" Bolt 7/8"-9 x 4.5" Spring Eye Bolt with Zerk 7/8"-9 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.25" Grade 5 Equalizer Center Bolt with Zerk 1"-8 Grade B Equalizer Hex Lock Nut

10K General Duty Axle Assembly Spacing Single Tandem Triple

38” (1) 9100065 (1) 9100065 (1) 9100070 (1) 9100065 (2) 9100070

42.25” (1) 9100065 (1) 9100065 (1) 9100069 (1) 9100065 (2) 9100069

48.50” (1) 9100065 (1) 9100065 (1) 9100066 (1) 9100065 (2) 9100066

WWW.TEXTRAIL.COM

B-13

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Wet - 10K GD 2-1/2” Slipper Spring Hanger Kits (3/4” Eye)

HAP-158-00 9100121 Single Axle Hanger Kit - 2-1/2" Slipper Springs 3/4" Eye Bolts (10K GD) Item

Part #

Ref #

Qty

Description

1

9000320

2

Front Hanger 4.50" Tall 3/4" Eye Bolt Hole

2

9000283

2

Rear Hanger 4.50" Tall

5

9000280

2

3/4"-10 x 4.5" Spring Eye Bolt

ns

9000138

2

3/4"-10 Grade B Spring Eye Hex Lock Nut

6-113

HAP-258-02 9100122 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Item

Part #

3

9000321

Ref #

Qty 2

Center Hanger 5.875" Tall 1" Eye Hole

4

9000322

2

Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt

5

9000280

2

3/4"-10 x 4.5" Spring Eye Bolt

ns

9000138

2

3/4"-10 Grade B Spring Eye Hex Lock Nut

6

9000013

2

1"-8 x 5.25" Grade 5 Equalizer Bolt

ns

9000136

2

1"-8 Grade B Equalizer Hex Lock Nut

6-113 6-112

Description

10K General Duty Axle Assembly Spacing 38”

42.25"

48.5”

Single Wet

9100072

(1) 9100121

9100072

Tandem Wet

9100089

(1) 9100122

9100091

WWW.TEXTRAIL.COM

B-14

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Dry - 10K GD 2-1/2” Slipper Spring Hanger Kits (3/4” Eye)

SUSPENSIONS

HAPD-158-00 (DRY) 9100072 Single Axle Hanger Kit - 2-1/2" Slipper Springs 3/4" Eye Bolts (10K GD) Item 1 2 5 ns

Part # 9100072-03 9100072-02 9000280 9000138

Ref # 28-74-2 30-61-1 7-264 6-113

Qty 2 2 2 2

Description Front Hanger 5.25" Tall 3/4" Eye Bolt Hole Rear Hanger 5.5" Tall 5/16" Bolt Hole 3/4"-10 x 4.5" Spring Eye Bolt 3/4"-10 Grade B Spring Eye Hex Lock Nut

HAP-258-01 (DRY) 9100089 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 38" Axle Spacing Item 3 4 5 ns 6 ns

Item 3 4 5 ns 6 ns

Part # Ref # Qty Description 9100089-03 29-42-2 2 Center Hanger 4.50" Tall 9100089-02 13-139-3 2 Equalizer 2.50" Slipper Spring 38" Spacing 3/4" Bolt 9000280 7-264 2 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 9000013 7-169 2 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut HAPD-258-02 (DRY) 9100090 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 42.25" Axle Spacing Part # Ref # Qty Description 9100089-03 29-42-2 2 Center Hanger 4.50" Tall 9100090-02 13-140-3 2 Equalizer 2.50" Slipper Spring 42.25" Spacing 3/4" Bolt 9000280 7-264 2 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 9000138 6-113 2 3/4"-10 Grade B Spring Eye Hex Lock Nut 9000013 7-169 2 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 9000136 6-112 2 1"-8 Grade B Equalizer Hex Lock Nut

HAP-258-03 (DRY) 9100091 Multi-Axle Hanger Kit - 2-1/2" Slipper Springs (10K GD) 48.5" Axle Spacing Item 3 4 5 ns 6 ns

Part # 9100089-03 9100091-02 9000280 9000138 9000013 9000136

Ref # 29-42-2 13-141-3 7-264 6-113 7-169 6-112

38” (1) 9100072 (1) 9100072 (1) 9100089 (1) 9100072 (2) 9100089

42.25” (1) 9100072 (1) 9100072 (1) 9100090 (1) 9100072 (2) 9100090

Qty 2 2 2 2 2 2

Description Center Hanger 4.50" Tall Equalizer 2.50" Slipper Spring 48.5" Spacing 3/4" Bolt 3/4"-10 x 4.50" Spring Eye Bolt with Zerk 3/4"-10 Grade B Spring Eye Hex Lock Nut 1"-8 x 5.50" Grade 5 Equalizer Center Bolt 1"-8 Grade B Equalizer Hex Lock Nut

10K General Duty Axle Assembly Spacing Single Tandem Triple

WWW.TEXTRAIL.COM

48.50” (1) 9100072 (1) 9100072 (1) 9100091 (1) 9100072 (2) 9100091 B-15

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

10K HD - 15K 3� Slipper Spring Hanger Kits

HAP-103-00 Item 1 2 5 ns 6 ns

Item 3 4 5 ns 6 ns 7 ns

Item 3 4 5 ns 6 ns 7 ns

Part # 9000112 9000111 9000014 9000137 9000013 9000136

9100012 Single Axle Hanger Kit - 3" Slipper Springs (10K - 15K) Ref # Qty Description 28-67-4 2 Front Hanger 6.25" Tall 30-66-1 2 Rear Hanger 6.63" Tall 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 7-169 2 1"-8 x 5.5" Spring Eye Bolt 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut

HAP-203-01 9100006 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 38" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000083* 13-107-7 2 Equalizer 3" Slipper Spring 38" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut HAP-203-02 9100055 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 42.25" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000082* 13-108-3 2 Equalizer 3" Slipper Spring 42.25" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut WWW.TEXTRAIL.COM

B-16

2010 Copyright by TexTrail, Inc.


SUSPENSIONS 10K HD - 15K 3” Slipper Spring Hanger Kits Continued

SUSPENSIONS

Item 3 4 5 ns 6 ns 7 ns

HAP-203-03 9100005 Multi-Axle Hanger Kit - 3" Slipper Springs (10K -15K) 48.50" Axle Spacing Part # Ref # Qty Description 9000110 29-37-4 2 Reamed Center Hanger 4.45" Tall OR 9000296 29-43-2 2 Machined Center Hanger 4.12" Tall 9000085* 13-109-3 2 Equalizer 3" Slipper Spring 48.50" Spacing 9000014 7-95 2 1/2"-20 x 4.5" Grade 2 Spring Retainer Bolt 9000137 6-466 2 1/2"-20 Grade B Spring Retainer Hex Lock Nut 9000013 7-169 2 1"-8 x 5.5" Spring Eye Bolt 9000136 6-112 2 1"-8 Grade B Spring Eye Hex Lock Nut 9000012 7-170 2 1-1/8"-7 x 6" Equalizer Center Bolt 9000135 6-72 2 1-1/8"-7 Grade B Equalizer Hex Lock Nut * Check with sales representative about product details on left or right hand application. 10K - 15K Axle Assembly Spacing 38" 42.25” 48.50” Single (1) 9100012 (1) 9100012 (1) 9100012 Tandem (1) 9100012 (1) 9100012 (1) 9100012 (1) 9100006 (1) 9100055 (1) 9100005 Triple (1) 9100012 (1) 9100012 (1) 9100012 (2) 9100006 (2) 9100055 (2) 9100005

WWW.TEXTRAIL.COM

B-17

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Spring Kits with U-Bolts and U-Bolt Kits

Spring and U-Bolt Kits Part #

Ref #

Capacity

Length

Leafs

U-Bolt Kit

9150014-02

2-SW4B

1,750

25-1/4"

4

9100045

Axle Beam APUBR1

Description

Type

2-3/8" Round 2-each Springs with U-Bolt Kit

Double-Eye Spring

9150018-02

2-SW5

2,950

25-1/4"

5

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Double-Eye Spring

9150021-02

2-SW6

3,500

25-1/4"

6

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Double-Eye Spring

9150031-02

2-WIE3

750

24-1/4"

3

9100045

APUBR1

2-3/8" Round 2-each Springs with U-Bolt Kit

Slipper Spring

9150076-02

2-803T3

2,000

26-1/2"

4

9100045

APUBR1

2-3/8" Round 2-each Springs with U-Bolt Kit

Slipper Spring

9150022-02

2-HW5116

3,750

26-1/2"

6

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150000-02

2-1203T3

3,500

26"

5

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150076-03

2-803T3/3

2,000

26-1/2"

4

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150020-02

2-E5226

3,400

26-1/2"

5

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150034-02

2-1403T3

4,000

26-1/8"

7

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150024-02

2-E5115

4,000

29-1/2"

6

9100047

APUBR2

3" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150024-03

2-E5115

4,000

29-1/2"

6

9100050

APUBR35

3-1/2" Round 2-each Springs with U-Bolt Kit

Slipper Spring

9150030-02

2-72-44-1

6,000

30-1/2"

6

9100097

1015KUB

5" Round

2-each Springs with U-Bolt Kit

Slipper Spring

9150001-02

2-72-10

4,500

30"

6

-

-

4" Round

2-each Springs with U-Bolt Kit

Slipper Spring

Round U-Bolt Kits for 1- Axle Part #

Ref #

DIA

Length

Use with

9100052-01

TTUBKR2K

3/8"

4"

1-3/4"

U-Bolt Kit for 2K Round Axle Tubes

9100045-01

TTUBKR3K

1/2"

5-1/2"

2-3/8"

U-Bolt Kit for 3.5K Round Axle Tubes

9100047-01

TTUBKR6K

3"

9100158

1/2"

7"

7/16”

5.13” 7-1/2"

Description

U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes

9100048-01

TTUBKR61K

9/16"

3"

U-Bolt Kit for 5.2K - 7K Round Axle Tubes

Part #

Ref #

DIA

9100052

APUBR10

3/8"

4"

1-3/4"

U-Bolt Kit for 2K Round Axle Tubes

9100045

APUBR1

1/2"

5-1/2"

2-3/8"

U-Bolt Kit for 3.5K Round Axle Tubes

Round U-Bolt Kits for 1- Axle Length

Use with

9100047

APUBR8

1/2"

7"

3"

9100050

APUBR35

9/16"

7-3/4"

3-1/2"

Part #

Ref #

DIA

Length

Use with

Description

U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 8K Round Axle Tubes

Packaged U-Bolts (2-each) Description

9000244-01

TTPUBR3K

3/8"

5-1/2"

2-3/8"

9000225-01

TTPUBR61K

1/2"

7"

3"

U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 6K Round Axle Tubes

9000245-01

TTPUBR6K

9/16"

7-1/2"

3"

U-Bolt Kit for 5.2K - 6K Round Axle Tubes

9000242-01

TTPUBS3K

9/16"

5-1/2"

2"

U-Bolt Kit for 2K - 3.5K Square Axle Tubes

9000239-01

TTPUBS2K

9/16"

5"

1-3/4"

Part #

Ref #

DIA

Length

Use with

9100046

APUB9

9/16"

5-1/2"

2"

U-Bolt Kit for 2K Square Axle Tubes

Square U-Bolt (Bulk) Kits for 1- Axle Description U-Bolt Kit for 2K - 3.5K Square Axle Tubes

9100054

APUB6

9/16"

5-1/2"

1-3/4"

U-Bolt Kit for 2K - 3.5K Square Axle Tubes

9100042

APUB3

9/16"

5"

1-3/4"

U-Bolt Kit for 2K - 3.5K Square Axle Tubes

9100053

APUB3

3/8"

4-1/2"

1-3/4"

U-Bolt Kit for 2K - 3.5K Square Axle Tubes

WWW.TEXTRAIL.COM

B-18

2010 Copyright by TexTrail, Inc.


SUSPENSIONS SPRINGS

When selecting a replacement spring ensure that you get the measurements as indicated on the illustration for that spring type. Worn springs may represent a longer measurement than actually required in your new spring selection. Your TexTrail Sales Representative is available to assist you in your selection of replacement springs.

SUSPENSIONS

Double-Eye Springs Part # 9150006 9150071 9150049 9150057 9150064 9150012 9150072 9150013 9150014 9150016 9150018 9150019 9150021 9150051 9150073 9150017 9150010 9150023

Ref # 1020 72-16 72-13 72-9 72-18 93180 75-6 SW3 SW4B SW4 SW5 72-40 SW6 72-25 SW722 SW626 SW427 SW627

Capacity 1,000 850 1,400 1,750 2,000 1,750 1,250 1,750 1,750 2,500 2,900 3,000 3,500 2,500 1,250 2,700 1,500 3,800

Leafs 3 3 4 3 4 3 3 3 4 4 5 1 6 4 3 6 4 6

A 20-3/8" 20-1/4" 20-1/2" 23-1/8" 23-1/8" 23-1/4" 23-1/8" 25-1/4" 25-1/4" 25-1/4" 25-1/4" 25-1/4" 24-7/8" 26" 25-1/8" 26-1/8" 27" 26-1/8"

B 3-3/6" 3-3/16" 3-5/16" 3-1/2" 3-1/2" 3-1/8" 3-5/8" 3" 3" 3" 3" 3" 3" 3" 3-3/16" 3-3/4" 2-3/4" 3-3/4"

Part # 9150007 9150025 9150031 9150009 9150070 9150065 9150011 9150015 9150074 9150000 9150076 9150020 9150022 9150035 9150034 9150036 9150038 9150024 9150026 9150001 9150059 9150027 9150033 9150046 9150029 9150028 9150030 9150032 9150008

Ref # WH4 WIC2 WIE3 WI5 72-2 WID2 WIF3 WIG4 1003T3 1203T3 803T3 E5226 HW5116 93165 1403T3 72-51-1 72-51-2 E5115 E8536 72-10 72-10-2 72-21 72-80-1 72-77 93161A 72-43-1 72-44-1 72-45-1 354-00

Capacity 1,000 500 750 1,300 1,000 1,000 1,500 2,000 2,500 3,500 2,000 3,400 3,750 4,000 4,000 4,000 4,000 4,000 5,300 4,500 4,500 5,000 5,000 5,000 5,000 5,000 6,000 7,500 11,000

Leafs 4 2 3 5 2 2 3 4 4 5 4 5 6 7 7 7 7 6 8 6 6 5 5 5 5 5 6 7 3

A 24-1/4" 24-1/4" 24-1/4" 24-1/4" 27-1/2" 30-1/4" 30-1/4" 30-1/4" 27-3/4" 26-3/8" 26-1/2" 26-5/8" 26-1/2" 26-1/4" 26-1/8" 26-7/8" 26-7/8" 29-1/2" 29-1/2" 30" 30" 29-3/4" 29-3/4" 30" 32-1/2" 30-1/4" 30-1/4" 30-1/4" 43-3/4"

B 23-1/8" 23-1/8" 23-1/8" 23-1/8" 24-3/4" 27-3/8" 27-3/8" 27-3/8" 24-7/8" 24-7/8" 24-7/8" 25-1/4" 25-1/8" 22-3/4" 24-7/8" 23-3/8" 23-3/8" 27-1/2" 27-1/2" 26-7/8" 26-7/8" 26-1/4" 26-1/4" 26-7/8" 29" 26-3/4" 26-3/4" 26-3/4" 40-5/8"

C 10-3/16" 10-1/4" 10-1/4" 11-9/16" 11-9/16" 11-5/8" 11-9/16" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-5/8" 12-9/16" 13-1/16" 13-1/2" 13-1/16"

Eye Bolt 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16"

Description 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring for Mobile Home Use 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring 1-3/4" Double-Eye Spring

Slipper Springs

WWW.TEXTRAIL.COM

C 4-1/8" 4" 4" 4-1/8" 4-3/16" 4-1/2" 4-1/2" 4-1/2" 3-1/16" 3-3/16" 3" 3-1/2" 3-1/2" 3" 3" 3" 3" 3-1/2" 3-1/8" 3-7/8" 3-7/8" 4" 4" 4" 4" 4" 4" 4" 3-3/16"

D 11-1/16" 11" 11" 11-1/8" 12-7/16" 13-1/2" 13-1/2" 13-1/2" 11-3/16" 11-1/8" 11-3/16" 12" 12" 11-3/16" 11-3/16" 11-1/8" 11-1/8" 13-1/2" 13-1/2" 13-1/8" 13-1/8" 13-1/2" 13-1/2" 13-1/2" 14" 13-3/8" 13-3/8" 13-3/8" 22-1/2"

B-19

Width 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3"

Description Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Slipper Spring Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 9/16" Eye Hook End Slipper Spring 5/8" Eye Hook End Slipper Spring 9/16" Eye Slipper Spring 9/16" Eye Slipper Spring Slipper Spring with 5/8" Steel Cased Rubber Bushing Slipper Spring 3/4" Eye Slipper Spring with 3/4" Rubber Eye Bushing Slipper Spring with 7/8" Brass Eye Bushing Slipper Spring with 3/4" Rubber Bushing Slipper Spring with 1" Rubber Bushing Slipper Spring with 1" Rubber Bushing Slipper Spring with 1" Rubber Bushing High Arch Slipper Spring

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Suspension Bushings & Shackle Straps

Part # Ref # 9000049 14-51 9000042 14-67 9000273 14-111 9000052 71-291 9000045 721590 9000044 14-70 9000053 722109 9000038 14-1-1 9000039 14-64-1 9000054 722108 9000051 ENP605 9000040 14-54-1 9000043 14-69 9000055 091414 9000295 14-112 9000047 091413 9000041 14-73 9000038-01 TTBK100 9000039-01 TTBK200 9000054-01 TTBK300

Part # Ref # 9000162 18-24-1 9000163 18-11 9000223 115052 9000164 115208 9000163-01 TTSK225 9000223-01 TTSK262 9000164-01 TTSK312

ID 1" 3/4" 7/8" 9/16" 7/8" 1-1/8" 3/4" 9/16" 9/16" 9/16" 9/16" 9/16" 1" 1" 3/4" 3/4" 5/8" 9/16" 9/16" 9/16"

Suspension Bushings OD Length Description 1.25" 3" Bronze Spring Eye Bushing 1" 2-1/2" Bronze Spring Eye Bushing 1" 2-1/2" Bronze Spring Eye Bushing 11/16" 1-3/4" Bronze Equalizer / Spring Eye Bushing 1-1/16" 2-15/16" Nylon Equalizer Bushing 2-1/8" 3-3/4" Rubber / Steel Equalizer Bushing 7/8" 1-3/4" Nylon Equalizer Bushing 11/16" 1-3/4" Nylon Equalizer / Spring Eye Bushing 11/16" 2" Nylon Spring Eye Bushing 3/4" 1-3/4" Nylon Equalizer Bushing 7/8" 1-3/4" Nylon Spring Eye Bushing 1-5/16" 2-3/16" Nylon Spring Eye Bushing 2-1/16" 2-1/8" Rubber / Steel Sleeve Spring Eye Bushing 2-1/8" 4-1/16" Rubber / Steel Sleeve Equalizer Bushing 2" 2-5/8" Rubber / Steel Insert Spring Eye Bushing 1-3/4" 2-3/4" Rubber / Steel Sleeve Spring Eye Bushing 1-3/8" 2-3/16" Rubber / Steel Sleeve Spring Eye Bushing 11/16" 1-3/4" Nylon Equalizer / Spring Eye Bushing Kit (8-each) 11/16" 2" Nylon Spring Eye Bushing Kit (8-each) 3/4" 1-3/4" Nylon Equalizer Bushings Kit (6-each)

HC 2-1/4" 2-1/4" 2-5/8" 3-1/8" 2-1/4" 2-5/8" 3-1/8"

Shackle Straps Length Hole Size Description 3-3/4" 9/16" Shackle Strap 3-1/2" 9/16" Shackle Strap 3-7/8" 9/16" Shackle Strap 4-3/8" 9/16" Shackle Strap 3-1/2" 9/16" Shackle Strap Kit (4-each) 3-7/8" 9/16" Shackle Strap Kit (4-each) 4-3/8" 9/16" Shackle Strap Kit (4-each)

WWW.TEXTRAIL.COM

B-20

2010 Copyright by TexTrail, Inc.


SUSPENSIONS U-Bolt Axle Tie Plates and Bolts

SUSPENSIONS

Square U-Bolt Axle Tie Plates Part # 9000203 9000205 9000208 9000209

Ref # 115983 116308 115585 117594

Use with Axle 1-1/2" 1-3/4" 2" 2"

Spring 1-3/4" 1-3/4" 1-3/4" 1-3/4" or 2"

-

Thickness

0.25"

U-Bolt Size 1/2" 9/16" 9/16" 9/16"

Description Tie Plate Tie Plate Tie Plate Tie Plate

Round U-Bolt Axle Tie Plates Part # 9000204 9000206 9000207 9000297 9000299 9000212-02 9000212 9000210 9000213 9000214 9000215 9000216 9000217

Ref # 117535 177858 117595 12-4 12-1-2 12-1 117521 117581 12-42 12-49 12-53 12-46

Use with Axle 1-3/4" 2-1/2" 2-3/8" 2-3/8" 2-3/8” 3" 3" 3" 3-1/2" 4" 5" 5" 5"

Spring Thickness 1-3/4" 0.25" 2" 1-3/4" 0.25" 2" 0.25" 2” 0.25” 1-3/4" 0.19" 1-3/4" 0.25" 1-3/4"-2" 0.25" 1-3/4"-2" 0.38" 2" 0.31" 2-1/2" 0.25" 3" 0.25" 3" 0.25" * Dexter Axle ** ALKO / Hayes Axle

U-Bolt Size 3/8" 9/16" 1/2" 1/2" 7/16” 1/2" 1/2" 1/2" or 9/16" 9/16" or 5/8" 5/8" 5/8" 5/8" 3/4"

Description 2K Straight Tie Plate 7.2K Tie Plate 2K Drop / 3.5K Tie Plate 3.5K - 4.4K Tie Plate 3.5K - 7.2K Tie Plate 3.5K -7.2K Zinc Tie Plate 3.5K -7.2K Tie Plate 3.5KHD - 7K Tie Plate 8K Tie Plate 9K Tie Plate 10K GD* / 10K** Tie Plate 10K HD* Tie Plate 12K - 15K* Tie Plate

Spring Center Tie Bolts Part # 9000192 9000195 9000196 9000197 9000198 9000199 9000200 9000201 9000202 6450182 9000143 9000137 6450181

Ref # BC12 BC3835 BC385 BC386 BC51635 BC5165 BC5166 BC7164 BC7166 BC38 BC516 BC12N BC716

Size 1/2" 3/8" 3/8" 3/8" 5/16" 5/16" 5/16" 7/16" 7/16" 3/8" 5/16" 1/2" 7/16"

WWW.TEXTRAIL.COM

Length 5" 3-1/2" 5" 6" 3-1/2" 5" 6" 4" 6"

Description Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Tie Bolt with nut Nut for 3/8" Tie Bolt Nut for 5/16" Tie Bolt Nut for 1/2" Tie Bolt Nut for 7/16" Tie Bolt B-21

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Round U-Bolts & U-Bolt Hardware

Round U-Bolts Part # 9000228 9000244 9000222 9000231 9000225 9000245 9000240 9000232 9000229 9000227 9000230 9000248

Ref # 11-54 11-21 11-22 11-74 11-18 176500 175667 11-65 11-64 11-70 11-77 091148

DIA 3/8" 1/2" 1/2" 7/16" 1/2" 9/16" 5/8" 9/16" 5/8" 3/4" 5/8" 5/8"

Length 4" 5-1/2" 6-1/4" 5-1/8" 7-1/16" 7-1/2" 9" 7-13/16" 8-13/32" 9-5/8" 8-15/16" 10-1/2"

Part # 9100052-01 9100045-01 9100047-01 9100048-01

Ref # TTUBKR2K TTUBKR3K TTUBKR6K TTUBKR61K

DIA 3/8" 1/2" 1/2" 9/16"

Length 4" 5-1/2" 7" 7-1/2"

Part # 9100052 9100045 9100047 9100048 9100050

Ref # APUBR10 APUBR1 APUBR8 APUBR9 APUBR35

DIA 3/8" 1/2" 1/2" 9/16" 9/16"

Part # 9000250 6450182 6450181 7030116 9000153 9000251 7700181 9000137 9000152 9000252 9000144 7030118 9000138 7030109

Ref # 33621 36156 36358 76124 12FHNP 12LWP 12FHFNP 6-129 916FHNP 916LWP 6-38 33630 6-113 76128

DIA 3/8" 3/8" 7/16" 7/16" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 5/8" 5/8" 3/4" 3/4"

Use with 1-3/4" 2-3/8" 2-3/8" 2-3/8" 3" 3" 3-1/2" 3-1/2" 4" 5" 5" 5"

Description U-Bolt for 2K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 3.5K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 5.2K - 7K Round Axle Tubes U-Bolt for 8K Round Axle Tubes U-Bolt for 8K Round Axle Tubes U-Bolt for 9K Round Axle Tubes U-Bolt for 12K & 15K Round Axle Tubes U-Bolt for 10K Round Axle Tubes (Dexter) U-Bolt for 10K Round Axle Tubes (Hayes/AL-KO)

Round U-Bolt Kits for 1- Axle Use with 1-3/4" 2-3/8" 3" 3"

Description U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes

Round U-Bolt Kits for 1- Axle (Bulk) Length 4" 5-1/2" 7" 7-1/2" 7-3/4"

Use with 1-3/4" 2-3/8" 3" 3" 3-1/2"

Description U-Bolt Kit for 2K Round Axle Tubes U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 5.2K - 7K Round Axle Tubes U-Bolt Kit for 8K Round Axle Tubes

U-Bolt Hardware

WWW.TEXTRAIL.COM

Description U-Bolt Lock Washer U-Bolt Nut U-Bolt Hex Nut U-Bolt Lock Washer U-Bolt Nut U-Bolt Lock Washer U-Bolt Flange Hex Nut U-Bolt Lock Nut U-Bolt Nut U-Bolt Lock Washer U-Bolt Lock Nut U-Bolt Lock Washer U-Bolt Lock Nut U-Bolt Lock Washer

B-22

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Square Axle U-Bolts, Marine U-Bolts & Packaged U-Bolts 8270007 Double U-Bolt Bracket SUSPENSIONS

Stainless Steel, Galvanized & Yellow Zinc Plated Marine U-Bolts Part # 9000507 9000508 9000509 9000501 9000502 9000503 9000504 9000289 9000510 9000505 9000506 9000511 9000500 7030202 7030199 7030203 7030204 7030069 7030062 Part # 8270007 8270008

Ref # US1201405S US1201505S US1201605S US1201405G US1201505G US1201605G US1301405G UB345120SS US1301505S US1301505G US1301605G UB337812SS US1301405Y 12CHN188SS 12LW188SS 12CHNG 12LWHDG 12CHNYZ 12LWYZ Ref # 10190G 10191G

DIA 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" Height 8-3/4" 9-3/4"

Length 4-5/16" 5-5/16" 6-5/16" 4-5/16" 5-5/16" 6-5/16" 4-5/16 4-1/2" 5-5/16" 5-5/16" 6-5/16" 3-7/8" 4-5/16"

Part # 9000244-01 9000225-01 9000245-01 9000242-01 9000239-01

Ref # TTPUBR3K TTPUBR61K TTPUBR6K TTPUBS3K TTPUBS2K

DIA 3/8" 1/2" 9/16" 9/16" 9/16"

Length 5-1/2" 7" 7-1/2" 5-1/2" 5"

Width 4" 4"

Use with 2" 2" 2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 3"

Description Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Yellow Zinc Square U-Bolt Yellow Zinc Square U-Bolt Stainless Steel Hex Nut Stainless Steel Lock Washer Galvanized Hex Nut Galvanized Lock Washer Yellow Zinc Hex Nut Yellow Zinc Lock Washer

Description Galvanized Double U-Bolt Bracket Galvanized Double U-Bolt Bracket

Packaged U-Bolts (2-each) Use with 2-3/8" 3" 3" 2" 1-3/4"

Description U-Bolt Kit for 3.5K Round Axle Tubes U-Bolt Kit for 5.2K - 6K Round Axle Tubes U-Bolt Kit for 5.2K - 6K Round Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K Square Axle Tubes

Square U-Bolt (Bulk) Kits for 1- Axle Part # 9100046 9100054 9100042 9100053

Ref # APUB9 APUB6 APUB3 APUB3

DIA 9/16" 9/16" 9/16" 3/8"

Length 5-1/2" 5-1/2" 5" 4-1/2"

Use with 2" 1-3/4" 1-3/4" 1-3/4"

Description U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes U-Bolt Kit for 2K - 3.5K Square Axle Tubes

Part # 9000239 9000005 9000246 9000242 9000243 9000289

Ref # 175130LN 4215-1ZP

DIA 9/16" 3/8" 7/16" 9/16" 9/16" 1/2"

Length Use with Description 5" 1-3/4" Steel U-Bolt for 2K Square Axle Tube 3-1/2" 2" Zinc Plated U-Bolt for 2K - 3.5K Square Axle Tube 4-1/4" 2" Zinc Plated U-Bolt for 2K - 3.5K Square Axle Tube 5-1/2" 2" Steel U-Bolt for 2K - 3.5K Square Axle Tube 6-1/2" 2" Steel U-Bolt for 2K - 3.5K Square Axle Tube 4-1/2" 3" Stainless Steel U-Bolt for 5.2K - 6K Square Axle Tube Square U-Bolt Hardware See previous page

Square U-Bolts

4203-1 4206-1L UB345120SS

WWW.TEXTRAIL.COM

B-23

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Hangers

Hanger for 1-3/4" Double Eye Springs Part # Ref # 9000113 28-5 9000114 28-49 9000122 HR07F 9000128 HR08F 9000129 HR34F 9000123 HR06F 9000127 30-20 * Single Axle Only

Top to Hole Center 3-1/4" 4-1/4" 1-1/4" 2-29/64" 5-3/8" 1-1/8" 29/32"

3.25" 4.25" 1.25" 2.45" 5.38" 1.13" 0.91"

Bolt Size 9/16" 9/16" 9/16" 9/16" 3/4" 9/16" 9/16"

Height 3-5/8" 4-7/8" 2" 3-7/64" 6-3/16" 2-5/16" 1-1/2"

Description Front/Center/Rear Hanger Front/Center/Rear Hanger Center Hanger Center Hanger Center Hanger Rear Hanger Rear Hanger with Steel Bushing*

Hanger for 1-3/4" Slipper Springs Part # 9000122 9000099 9000170

Ref # HR07F SH01B 29-5-1

Top to Hole Center 1-1/4" 4-1/2"

Part # 9000290 9000291 9000292 9000100-02 9000100 9000105-02 9000105 9000106-02 9000106 9000119 9000121 9000120 9000118 9000117

Ref # 29-1 28-1 30-28 HR27F 721586 HR25F 721584 HR26W 721585 28-9-1 30-6-1 28-68-4 30-68-1 29-39-4

Top to Hole Center 3-1/2" 4-1/4" 5-1/4" 4-3/8" 4-3/8" 3-9/16" 3-9/16" 5-1/16" 5-1/16" 5" 6-3/8" 5" 6-5/16" 4-1/2"

1.25" 4.50"

Bolt Size 9/16" 7/8"

Height 2" 5-1/2"

Description Front Hanger Rear Hanger C-Clip 7.2K - 8K Center Hanger

Hanger for 2" Slipper Springs 3.50" 4.25" 5.25" 4.38" 4.38" 3.57" 3.57" 5.07" 5.07" 5.00" 6.38" 5.00" 6.33" 4.50"

Bolt Size 7/8" 9/16" 5/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 9/16" 5/16" 5/8" 5/16" 1"

Height 4-1/2" 4-7/8" 5-23/32" 4-1/2" 4-1/2" 4-5/16" 4-5/16" 6" 6" 5-5/8" 6-13/16" 6" 6-13/16" 5-1/2"

Description 3.5K - 7K Center Hanger 3.5K -7K Front Hanger 3.5K -7K Rear Hanger 3.5K -8K Center Hanger 3" Wide 3.5K -8K Center Hanger 4" Wide 3.5K -8K Front Hanger 3" Wide 3.5K -8K Front Hanger 4" Wide 3.5K -8K Rear Hanger 3" Wide 3.5K -8K Rear Hanger 4" Wide 7.2K - 9K Front Hanger 8K - 9K Rear Hanger 8K - 9K Rubber Bushed Front Hanger 8K - 9K Rubber Bushed Rear Hanger 8K -9K Rubber Bushed Center Hanger

Hanger for 2-1/2" Slipper Springs Part # Ref # Top to Hole Center Bolt Size 9000108 29-33 4-7/16" 4.44" 3/4" 9100089-03 29-42-2 4-1/8" 4.13" 1" 9100072-03 28-74-2 5-1/4" 5.25" 3/4" 9000116 28-60 5-1/4" 5.25" 3/4" 9000265 28-72-1 5-1/4" 5.25" 7/8" 9100072-02 30-61-1 4-7/16" 4.41" 5/16" 9000115 28-59 5-1/4" 5.25" 3/4" 9000264 28-73-1 5-1/4" 5.25" 7/8" 9000286 HR33F 4-7/16" 4.44" 1" 9000281 HR32FL 2-1/2" 2.50" 13/16" HR31W 3/4" 9000283 9000288 HR32FR 2-1/2" 2.50" 13/16" 9000126 7416 1-7/8" 1.90" 1" 9000171 7417 5-3/8" 5.38" 3/4" 9000125 7418 5-3/8" 5.38" * Measurement from Top of Hanger to Outside Bottom Dimension of Bushing.

Height 5-15/16" 5-5/8" 6-1/2" 7" 7" 6-15/16" 7" 7" 5-7/8" 4-1/2" 4-1/2" 4-1/2" 3-1/4" 8" 8"

Description 10K GD Center Hanger 10K GD Center Hanger 10K GD Front Hanger 10K GD LH Front Hanger 10K GD LH Front Hanger 10K GD Rear Hanger 5-15/32" (5.46")* 10K GD RH Front Hanger 10K GD RH Front Hanger 10K HD Center Hanger 10K HD LH Front Hanger 10K HD Rear Hanger 10K HD RH Front Hanger AL-KO/Hayes 10K -16K Center Hanger AL-KO/Hayes 10K -16K Front Hanger AL-KO/Hayes 10K -16K Rear Hanger

Hanger for 3" Slipper Springs Part # Ref # Top to Hole Center 9000296 29-43-2 4-1/8" 9000110 29-37-4 4-1/2" 9000112 28-67-4 6-1/4" 9000111 30-66-1 7-51/64" * New Center Hanger for HAP-203

WWW.TEXTRAIL.COM

4.13" 4.50" 6.25" 7.80"

Bolt Size 1-1/8" 1-1/8" 1" 1/2"

B-24

Height 5-5/8" 6" 7-1/2" 8-39/64"

Description 10K HD - 15K Center Hanger (Machined)* 10K HD - 15K Center Hanger (Reamed) 10K HD - 15K Front Hanger 10K HD - 15K Rear Hanger

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Equalizers

SUSPENSIONS

Type 1

Type 2

Type 3

Type 4

Type 5

Cast Equalizers Part #

Ref #

A

B

C

D

E

O.D.

9000091 9000088 9000066 9000065 9000090 9000089 9000067

A2251B A2251B3 13-10 13-104-2 E1 E3 E4

8" 8" 6" 5-5/8" 7-3/4" 7-3/4" 6-1/4"

4" 4" 4" 2" 2-7/8" 2-7/8" 2"

9/16" 9/16" 9/16" 9/16" 9/16" 3/4" 3/4"

9/16" 3/4" 9/16" 9/16" 9/16" 9/16" 9/16"

2-13/16" 3-7/8" 3-7/8" 3-1/8"

1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4" 1-3/4"

Description Straight Cast Equalizer 2K - 7K Straight Cast Equalizer Tall Cast Equalizer Cast Equalizer 2K - 7K Curved Cast Equalizer 2K - 7K Curved Cast Equalizer 2K - 7K Short Curved Cast Equalizer

Part #

Ref #

A

B

C

D

E

F

G

9000094

13-4

3/4"

4-3/4"

4-3/4"

5/16"

5"

7/8"

9/16"

Part #

Ref #

Spacing

A

E

F

G

I.D.

9100089-02 9000074 9000075

13-139-3 13-80-1 13-81-1

38" 38" 38"

14-1/4" 14-1/4" 14-1/4"

1-3/8" 1-3/8" 1-3/8"

1" 1" 1"

3/4" 3/4" 3/4"

2-3/4" 2-3/4" 2-3/4"

9000266 9000267 9100090-02 9000076 9000077 9000268 9000269 9100091-02 9000078 9000079 9000270 9000271 9000060 9000061 9000063 9000062 9000095 9000064

13-132-2 13-133-2 13-140-3 13-82-1 13-83-1 13-134-2 13-135-2 13-141-3 13-84-1 13-85-1 13-136-2 13-137-2 8327 8328 8319 8320 8315 8316

38" 38" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 48-1/2" 48-1/2" 48-1/2" 48-1/2" 48-1/2" 42-1/4" 42-1/4" 42-1/4" 42-1/4" 48-1/4" 48-1/4"

14-1/4" 14-1/4" 18-3/8" 18-3/8" 18-3/8" 18-3/8" 18-3/8" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 24-1/2" 15-3/4" 15-3/4" 15-3/4" 15-3/4" 21-3/4" 21-3/4"

1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" -

1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1" 1"

7/8" 7/8" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 3/4" 3/4" 7/8" 7/8" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"

2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4" 2-3/4"

Part # 9000383 9000384 9000083 9000082 9000085

Ref # EQ05LW EQ05RW 13-107-7 13-108-3 13-109-3

Spacing 42-1/4" 42-1/4" 38" 42-1/4" 48-1/2"

A 18-1/2" 18-1/2" 14-1/4" 18-3/8" 24-3/4"

B 7-3/4" 7-3/4" 4-1/2" 6-3/4" 10"

C 7-1/16" 7-1/16" 5" 7-1/8" 10-3/8"

Type 1 1 2 2 2 2 2

2" Slipper Spring Equalizers Description 3.5K - 8K 33.5" Spacing Bullnose Equalizer 2-1/4" ID Part # Ref # A B C D E F G Description 9000092 13-44-1 13-1/8" 5-9/16" 5-15/16" 3-1/2" 9/16" 15/16" 3/8" 3.5K - 8K 36" Spacing Equalizer 9000272 E4541 12" 4-3/4" 4-7/16" 3-7/8" 9/16" 7/8" 9/16" 3.5K - 8K 2-1/4"ID Heavy Duty Equalizer 1-3/8"THC* 9000070 E5541 12" 4-3/4" 4-7/16" 3-7/8" 9/16" 7/8" 9/16" 3.5K - 8K 2-1/4"ID Heavy Duty Equalizer 1-7/16"THC* 9000072 13-117-3 13-1/8" 5-1/2" 5-9/16" 5/8" 15/16" 5/16" 8K - 9K 38" Spacing Equalizer 9000071 13-118-3 17-3/8" 7-5/8" 7-3/4" 5/8" 15/16" 5/16" 8K - 9K 42-1/4" Spacing Equalizer 9000073 13-119-3 23-1/2" 10-3/4" 10-3/4" 5/8" 15/16" 5/16" 8K - 9K 48-1/2" Spacing Equalizer 9000069 8329 13-7/8" 7/16" 7/8" 9/16" AL-KO/Hayes 8K Equalizer * THC = Top View of Equalizer has two 9/16" holes. E4541 has holes centered at 1-3/8" & 1-1/4". E5541 has holes centered at 1-7/16" & 1-1/4".

Type 3 Type 4 4 4 4 4 4 4

2-1/2" Slipper Spring Equalizers Description 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad 10K General Duty LH Equalizer with bushing and slipper pad 10K General Duty RH Equalizer with bushing and slipper pad AL-KO/Hayes 9-16K LH Short Equalizer with bushings AL-KO/Hayes 9-16K RH Short Equalizer with bushings AL-KO/Hayes 9-16K LH Medium Equalizer with bushings AL-KO/Hayes 9-16K RH Medium Equalizer with bushings AL-KO/Hayes 9-16K LH Long Equalizer with bushings AL-KO/Hayes 9-16K RH Long Equalizer with bushings

Type 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

3" Slipper Spring Equalizers

WWW.TEXTRAIL.COM

D 1-1/4" 1-1/4" 1-1/8" 1-1/8" 1-1/8"

E 1" 1" 1" 1" 1"

B-25

I.D. 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/8"

Description 10K General Duty LH Equalizer with bushing 10K General Duty RH Equalizer with bushing 10K General Duty Equalizer with rubber bushing 10K General Duty Equalizer with rubber bushing 10K Heavy Duty Equalizer with rubber bushing

Type 5 5 5 5 5

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Suspension Hardware Part # 9000030-01 9000031-01

Ref # TTBN916 TTBN917

Diameter 9/16"-18 9/16"-18

Part # 9000018 9000004 9000010 9000034 9000017 9000016 9000009 9000020 9000014 9000030 9000031 9000023 9000008 9000011 9000021 9000280 9000019 9000013 9000012

Ref # 126B2LN 126A1LN 7-135-2 7-260-2 7-1 7-1-1 7-136-2 7-7 7-95 7-3 7-17 90722 5821 5819 7-181 7-264 7-182 7-169 7-170

Diameter 9/16"-18 3/4"-16 3/4"-10 7/8"-9 7/8"-9 7/8"-9 1"-8 5/16"-18 1/2"-20 9/16"-18 9/16"-18 3/4"-16 3/4"-10 1"-8 5/8"-11 3/4"-10 1"-8 1"-8 1-1/8"-7

9000140 9000146 9000142 9000137 7700181 9000143 9000147 9000145 9000144 9000139 9000149 9000138 9000135 9000148 9000136 9000153 6450182 6450181 9000152

90626 6-3 6-62 6-46 12FHFNP 6-11 6-7 6-111 6-38 6-47 6715 6-113 6-72 6716 6-112 12N 6-10 6-17 916N

3/4"-16 7/8"-9 3/8"-24 1/2"20 1/2"-20 5/16"18 9/16"-18 7/8"-9 5/8"-11 3/4"-16 3/4"-10 3/4"-10 1-1/8"-7 1"-8 1"-8 1/2"-20 3/8"-24 7/16"-20 9/16"-18

9000250 7030116 9000251 9000252 7030118 7030109 Pins & Zerks Part # 8750003 9000096 9000132 8750004

38LW 5-8 5-58 916LW 76127 76128

3/8" 7/16" 1/2" 9/16" 5/8" 3/4"

Ref # 19-2 61-6 1610 61-7

Diameter 1/8" 1/4"-27 1/4"-27 1/4"-28

WWW.TEXTRAIL.COM

Shackle Nut & Bolt Kits Length Description 3" Shackle Nut & Bolt Kit Quantity 4-each 3-1/2" Shackle Nut & Bolt Kit Quantity 4-each Bolts & Screws Length Description 3" Grease Zerk Bolt for Spring Eye 3-1/2" Grease Zerk Bolt less Grease Zerk 4-1/2" Grease Zerk Spring Eye Bolt 4-1/2" Grease Zerk Bolt for Spring Eye 4-5/8" Grease Zerk Bolt Grade 2 with Cotter Pin Hole 4-5/8" Grease Zerk Bolt Grade 2 without Cotter Pin Hole 5-1/4" Grease Zerk Bolt 3-1/4" Hex Head Bolt Grade 2 4-1/2" Hex Head Spring Retaining Bolt 3" Hex Head Shackle Bolt for 1-3/4" Springs 3-1/2" Hex Head Shackle Bolt for 2" Springs 3-1/2" Hex Head Bolt Black Oxide Grade 8 4-1/2" Hex Head Bolt Black Oxide Grade 8 5-7/8" Hex Head Bolt Black Oxide Grade 8 4" Hex Head Cap Screw Grade 5 4-1/2" Hex Head Cap Screw 5" Hex Head Cap Screw Grade 5 5-1/2" Hex Head Cap Screw Grade 5 6" Hex Head Cap Screw Grade 5 Nuts Castle Nut Grade 2 Black Oxide Castle Nut Grade 2 Flange Lock Nut Grade 5 Zinc Flange Lock Nut Grade B Serrated Plain Hex Flange Nut Grade 2 Hex Head Lock Nut Grade A Zinc Hex Head Lock Nut Hex Head Lock Nut Grade B Hex Head Lock Nut Grade B Zinc Hex Head Lock Nut Grade B Hex Head Lock Nut Grade 2 Black Oxide Hex Head Lock Nut Grade B Hex Head Lock Nut Grade B Hex Head Lock Nut Grade 2 Black Oxide Hex Head Lock Nut Grade B Hex Head Nut Hex Nut Grade 2 Zinc Hex Nut Grade 5 Zinc Hex Head Nut Washers Lock Washer Lock Washer Grade 5 Zinc Lock Washer Lock Washer Lock Washer Grade 5 Zinc Lock Washer Grade 5 Zinc Length 1-3/4"

Description Cotter Pin Grease Zerk 65째 Angle 1/8"-27 MPT Grease Zerk Straight 1/8"-27 MPT Grease Zerk Straight Thread Forming 0.20/235D Hole EZ-Lube B-26 2010 Copyright by TexTrail, Inc.


SUSPENSIONS Heavy Duty Suspension System

SUSPENSIONS

The Hutch 9700 Series remains the leader in heavy duty trailer suspensions. Hutch incorporates innovative thinking resulting in a durable and reliable system that not only extends service life, reduces downtime and protects cargo but also provides a smooth and comfortable ride.

Heavy Duty Suspension ITEM # REF # DESCRIPTION 9100109 HAP-101-00 Single Under Slung Kit 9100110 HAP-201-00 Add-On Under Slung Kit 9100026 9700TUS Tandem Suspension w/ Springs

CAPACITY 25K 25K

AXLE Single Tandem

SPRINGS

354-00

The Basis of any order must begin with a complete description of the unit. The following procedure will provide the descriptive information required: 1. Determine the number of axles required and the spacing of these axles. We stock hangers for tandem axles with 49” axle centers. 2. Select the style of hangers required to mount the suspension on your particular frame or subframe. Specify whether these hangers are to be fabricated (H) or cast (CH) steel. Fabricated hangers are in stock. 3. Determine the mounting height (Mtg/ht) your application requires. A Mounting Height Chart may be found on the next page. 4. Please note that mounting height is dependent upon: a) Suspension configuration – Overslung or Underslung. Unless other-wise specified, suspension configuration is assumed to be overslung. b) Axle size - 5”. c) Spring seat height – 3/4” to 4 3/4” in 1/2” increments. d) Spring type – Standard or Heavy-Duty, number of leaves and spring arch. 5. Choose which U-bolt size you would like (either the standard 7/8” or the optional 3/4” size).

WWW.TEXTRAIL.COM

B-27

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Heavy Duty Suspension System Continued

NOTE: In many instances more than one combination will result in the same mounting height. Therefore, all of the aforementioned factors should be taken into consideration when ordering. Example: A tandem axle (T) 9700 Series suspension requiring a mounting of 16” and fabricated (H) under mount hangers (Un/mt) for use with 3/4” U-bolts and 5” round axles with 354-00 springs would be ordered as follows: Quantity

Hanger Type

1ea

H

Series Number Axle Config Hangers U-Bolts 5" Round Axles See Mounting Chart Springs 9700

T

Un/mt

3/4"

5" rd

3/4" seat

354-00

Mounting Height Chart: Nominal Values For No-Load Conditions

WWW.TEXTRAIL.COM

B-28

2010 Copyright by TexTrail, Inc.


SUSPENSIONS Air Suspension System

SUSPENSIONS

WELD ON AIR RIDE CAPACITY 9100124

TA-120U

10-12K

9100226

TA-250U

15-25K

RIDE HEIGHT AXLE TRAVEL UP DOWN

MIN SPACING

6"

3.13"

3.25"

38"

6.5

3.25

5"

46"

AIR CONTROL KITS Includes HCV Valve and Brake Protection Valve 9100062

ACK-203

Automatic Single Height Control Valve Kit. Includes HCV

9100125

ACK-201

Automatic Dual Height Control Valve Kit. Includes HCV

9100126

17760-04

Height Control Valve. For use with Kit Below

9100127

19535

9100128

19535-B

9100129

17988

Manual Height Control. Includes Regulator and Gauge Bracket for Manual Height Control Valve Dump Valve

AIR COMPRESSOR KIT 9100218

25435

Air control system for trailers without air control

Kit Includes: - Heavy Duty Compressor - Air Tank - Air Line - Fuse Block / Fuse - Fittings & Hardware *HCV must be purchased above WWW.TEXTRAIL.COM

B-29

2010 Copyright by TexTrail, Inc.


SUSPENSIONS

SUSPENSIONS

Air Suspension System

9100212 Wireless Digital Handheld Controller Unit

9100217 Quick Shot On-Board Air Compressor Kit

9100198 Air Lift for 2009 Chevy Silverado

Air Springs & Accessories Part # 9100209 9100203 9100204 9100198 9100201 9100202 9100202 9100203 9100216 9100206 9100207 9100206 9100207 9100216 9100201 9100200 9100205 9100214 9100201 9100208 9100203 9100204 9100201 9100202 9100202 9100199 9100210 9100211 9100212 9100215 9100217 9100218 9100219

Ref # 59501 57250 57275 59565 57215 57216 57216 57250 59551 57295 57297 57295 57297 59551 57215 57212 57291 57125 57215 57298 57250 57275 57215 57216 57216 57299 25592 25415 72000 52130 25690 25435 50203

Make ALL Chevy Chevy Chevy Chevy Chevy Chevy Chevy Dodge Dodge Dodge Dodge Dodge Dodge Dodge Ford Ford Ford Ford Ford GMC GMC GMC GMC GMC Toyota

WWW.TEXTRAIL.COM

Year 66-08 01-08 01-10 07-11 69-04 88-00 88-89 99-08 02-08 03-07 03-07 03-08 03-08 02-08 69-04 05-08 05-08 00-99 69-04 71-04 01-08 01-08 69-04 88-00 88-89 07-09

Description Ride Control Series Silverado 1500 Heavy Duty Silverado 2500HD & 3500 1TON P/U 2&4WD Silverado 1500 GMT 900 Series 3/4Ton - 1Ton Super Duty 3/4Ton - 1Ton Super Duty 1/2Ton Silverado 2500 3/4 TON P/U 2&4WD EXCEPT 2500HD Ram 1500 1/2Ton Super Duty Series 2500 & 3500 4WD Super Duty Series 2500 & 3500 2WD Ram 2500 4WD & 3500 4WD Single & Dual Wheels Ram 2500 4WD & 3500 2WD Single & Dual Wheels Ram 1500 1/2Ton 3/4Ton - 1Ton Super Duty F250 & F350 without 5th Wheel or Gooseneck Hitch F250 & F350 Super Duty Series with B&W Hitch E-350 Super Duty Series Van 3/4Ton - 1Ton Super Duty F250 & F350 Super Duty Series with Reese 5th Wheel Hitch Sierra 1500 Heavy Duty Sierra 2500HD & 3500 1TON P/U 2&4WD 3/4Ton - 1Ton Super Duty 3/4Ton - 1Ton Super Duty 1/2Ton Tundra LOADCONTROLLER II Single Gauge Compressor System 5psi SMARTAIR Single Sensor Auto Leveling System Wireless Digital Handheld Controller Unit 2" Lock & Lift Spacer with mounting hardware Quick Shot On-Board Single Gauge / Dual Control Air Compressor Kit Air Ride Compressor Kit 150psi with 5-Gal Tank & HCV Sleeve Replacement for Ride Control Kit B-30

2010 Copyright by TexTrail, Inc.


TIRES & WHEELS

TIRES & WHEELS

Table of Contents - Tires & Wheels Center Caps

C-6

Chrome Wheel Nuts

C-5

Hub Caps

C-5

Hub Covers

C-6

Locking Lug Nuts

C-5

Lug Wrench

C-5

Simulators

C-6

Tire & Wheel Assemblies

C-8

Tires

C-8

Valve Stems

C-5

Wheel & Tire Assemblies

C-8

Wheel Nuts

C-5

Wheel Covers

C-6

Wheel Simulators

C-6

Wheels

C-7

WWW.TEXTRAIL.COM

C-1

2010 Copyright by TexTrail, Inc.


TIRES & WHEELS Tire & Wheel Assembly Description

ST ST

WWW.TEXTRAIL.COM

C-2

2010 Copyright by TexTrail, Inc.

TIRES & WHEELS

Explanation of part # ST205DLRB-155SM545 Trailer Tire / 205mm / Bias Ply / Load Range B / 15 x 5 Wheel / Silver Mod / 5 on 4-1/2" Bolt Pattern 205 D LRB 155 SM 545 Description Trailer Tire 205 205mm Tire Size (Width) 225 225mm Tire Size (Width) 23580 235mm Tire Size (Width) 80 ratio 235 235mm Tire Size (Width) 85 ratio D Bias Ply R Radial Ply A Load Range A B Load Range B C Load Range C D Load Range D E Load Range E F Load Range F G Load Range G J Load Range J 145 14 x 5 Wheel Size 146 14 x 6 Wheel Size 155 15 x 5 Wheel Size 156 15 x 6 Wheel Size 166 16 x 6 Wheel Size 167 16 x 7 Wheel Size AM Aluminum Mod Wheel BS Black Spoke Wheel CD Chrome Directional Wheel CS Chrome Spoke Wheel DL Dual Wheel GAL Galvanized Wheel OEM OEM Style Wheel SD Silver Dual Wheel SM Silver Mod Wheel SS Silver Spoke Wheel WD White Dual Wheel WM White Mod Wheel WS White Spoke Wheel 545 5 on 4.5" 547 5 on 4.75" 550 5 on 5" 555 5 on 5.5" 655 6 on 5.5" 865 8 on 6.5"


TIRES & WHEELS Tire & Wheel Assembly Description

TIRES & WHEELS

750 185 205 480 530 570

16

8 10 12 13 14 15 16

Explanation of part # 75016DLRE-166SM655 750mm / 16" Diameter / Bias Ply / Load Range E / 16 x 6 Wheel / Silver Mod / 6 on 5-1/2" Bolt Pattern D LRE 166 SM 655 Description 8" Only 8" & 10" Only 8", 10" & 12" 10" & 12" Only 8" Only 8" Tire Diameter 10" Tire Diameter 12" Tire Diameter 13" Tire Diameter 14" Tire Diameter 15" Tire Diameter 16" Tire Diameter D Bias Ply R Radial Ply A Load Range A B Load Range B C Load Range C D Load Range D E Load Range E F Load Range F G Load Range G J Load Range J 850 8 x 5 Wheel Size 8375 8 x 3-3/4 Wheel Size 106 10 x 6 Wheel Size 124 12 x 4 Wheel Size 125 12 x 5 Wheel Size 145 14 x 5 Wheel Size 146 14 x 6 Wheel Size 155 15 x 5 Wheel Size 156 15 x 6 Wheel Size 166 16 x 6 Wheel Size 167 16 x 7 Wheel Size AM Aluminum Mod Wheel BS Black Spoke Wheel CD Chrome Directional Wheel CS Chrome Spoke Wheel DL Dual Wheel GAL Galvanized Wheel OEM OEM Style Wheel SD Silver Dual Wheel SM Silver Mod Wheel SS Silver Spoke Wheel WD White Dual Wheel WM White Mod Wheel WS White Spoke Wheel 440 4 on 4" 545 5 on 4.5" 547 5 on 4.75" 550 5 on 5" 555 5 on 5.5" 655 6 on 5.5" 865 8 on 6.5"

WWW.TEXTRAIL.COM

C-3

2010 Copyright by TexTrail, Inc.


TIRES & WHEELS Wheel Description

WWW.TEXTRAIL.COM

C-4

2010 Copyright by TexTrail, Inc.

TIRES & WHEELS

Explanation of part # Wheel 15x6 550 CRMDIR Trailer Tire / 205mm / Bias Ply / Load Range B / 15 x 5 Wheel / Silver Mod / 5 on 4-1/2" Bolt Pattern Wheel 15X6 550 CRMDIR Description Wheel Wheel 12x4 12 x 4 Tire Diameter 13x4.5 13 x 4-1/2 Tire Diameter 14x6 14 x 6 Tire Diameter 15x5 15 x 5 Tire Diameter 15x6 15 x 6 Tire Diameter 15x7 15 x 7 Tire Diameter 15x8 15 x 8 Tire Diameter 15x10 15 x 10 Tire Diameter 16x6 16 x 6 Tire Diameter 16x7 16 x 7 Tire Diameter 16x7.5 16 x 7-1/2 Tire Diameter 16x7HD 16 x 7 Tire Diameter Heavy Duty 16.5x6.75 16-1/2 x 6-3/4 Tire Diameter 17.5x6.75 17-1/2 x 6-3/4 Tire Diameter 440 4 on 4" 545 5 on 4.5" 547 5 on 4.75" 550 5 on 5" 555 5 on 5.5" 655 6 on 5.5" 865 8 on 6.5" ALUMOD Aluminum Mod Wheel BLKSPK Black Spoke Wheel CRMDIR Chrome Directional Wheel CRMSPK Chrome Spoke Wheel CRMMOD Chrome Mod Wheel DL Dual Wheel SGL Single Wheel GALMOD Galvanized Mod Wheel GALSPK Galvanized Spoke Wheel OEM OEM Style Wheel SLVDL Silver Dual Wheel SLVMOD Silver Mod Wheel SLVSPK Silver Spoke Wheel WHTDL White Dual Wheel WHTMOD White Mod Wheel WHTSPK White Spoke Wheel


TIRES & WHEELS TIRE AND WHEEL ACCESSORIES

Part #

Ref #

Type

9300055 9300054 9300052

TR600C TR600 TR801

1 1 1

Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.453"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L

Description 1

Chrome Stem / Rubber Snap-in Small Hole Up to 100psi Metal Stem / Rubber Snap-in Small Hole Up to 100psi Metal Stem / Rubber Snap-in Large Hole Up to 100psi

9300028

TR413

2

Valve Stem 0.453"DIA x 1.25"L

Rubber

9300050 9300030 9300051 9300053 9300031

501SW TR415 TR572 TR416 TR500

3 4 5 6 7

Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.625"DIA x 1.25"L Valve Stem 0.625"DIA x 3.75"L Valve Stem 1.5"L Chrome Metal Valve Stem 0.625"DIA x 2"L

Metal Outer Mount for Aluminum Wheels 0.453 Grommet Rubber Metal Long Pressure Over 100psi Tubeless Tire Valve Outer Mount High Performance 100psi maximum Metal

NOTE: "A" above is the length of the stem

Lug Wrenches Part #

Ref #

Description

9420050

405

Telescoping Lug Wrench w/ 13/16", 7/8" & 17-18MM Dual Sockets

9420051

433

20" Cross Lug Wrench 17MM, 3/4" 13/16" & 7/8" with Bag

Part #

Ref #

8200220-01

TTWL120

9420050

9420051

Locking Lug Nuts Description 1/2" Locking Wheel Nut with Key 8200220-01

Chrome Wheel Nuts Part #

Ref #

Type

7700044 7700202 7700201

1904 1904L 3010

A A B

Description 1/2" 60째 Acorn Chrome Hex Wheel Nut 1/2" 60째 Acorn Chrome Hex Wheel Nut Bulge 1.75" Long 9/16" 60째 Acorn Chrome Duplex Hex Wheel Nut

See page A-94 for more wheel nuts.

Hub Caps Part #

Ref #

ID

7600120 7600121 7600012 7600011 7600013

1102 1302 1308 1306 1309

7.66" 8.74" 9.23" 10.125" 11.563"

Description

Fits Wheel Size

Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap Chrome Baby Moon Hub Cap

8, 12 & 13 15 14 & 15 14 & 15 16 & 16.5

WWW.TEXTRAIL.COM

C-5

2010 Copyright by TexTrail, Inc.

TIRES & WHEELS

Valve Stems Description 2


TIRES & WHEELS

TIRES & WHEELS

TIRE AND WHEEL ACCESSORIES

Part # 7600100 7600101 7600102 7600103 7600104 7600105 7600108 7600112 7600109 7600110 7600111 7600107 7600106

Ref # 295EZ 319EZ 328EZ 425EZ 482EZ 512EZ 319SS 328SS 425SS 482SS 512SS CCCP BCCP

Center Caps Description Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Chrome Center Cap Open End with Chrome Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Stainless Steel Center Cap Open End with Plug Replacement Chrome ABS Plug Replacement Black ABS Plug

Fits Pilot Hole 2.950" 3.190" 3.280" 4.250" 4.820" 5.120" 3.190" 3.280" 4.250" 4.820" 5.125"

Chrome Hub Covers Description ABS Chrome Hub Cover ABS Chrome Hub Cover ABS Chrome Hub Cover 13/16" Lug ABS Chrome Hub Cover 7/8" Lug Chrome Wheel Covers Part # Ref # Description 7600028 QT544CLO ABS Chrome Wheel Cover 7600029 QT545CLO ABS Chrome Wheel Cover 7600030 QT655CLO ABS Chrome Wheel Cover 13/16" Lug 7600031 QT6556CLO ABS Chrome Wheel Cover 7/8" Lug 7600032 QT865CLO ABS Chrome Wheel Cover 7/8" Lug Part # 7600025 7600023 7600024 7600018

Part # 7600051 7600004 7600021 7600015 7600050 7600016 7600049

Ref # QT545C QT655C QT765C QT865C

Ref # GQST50 GQT60 GDST87 NDT165 GDST175 N27510 PGQ60POC

Stainless Steel Wheel Simulators Description Wheel Simulator - Single Wheel Truck / Trailer Set Wheel Simulator - Snap On Wheel Simulator - Bolt On Wheel Simulator - Piggy Back Wheel Simulator - Single Wheel Trailer Set Wheel Simulator - Piggy Back Wheel Simulator - Replacement Center Pop Out

WWW.TEXTRAIL.COM

C-6

Wheel Lugs 4 4 5 5 or 6 8 8 5 5 5 or 6 8 8

Wheel Lugs 545 655 865 865 Wheel Lugs 545 655 865 865 865

Dual Dual Dual

Wheel Size 15" 16" 16" / 16-1/2" 16" / 16-1/2" 17-1/2" 17-1/2" -

Wheel Lugs 6 8HH 8 8 8 4HH 8 10 -

2010 Copyright by TexTrail, Inc.


TIRES & WHEELS

Wheels Part #

Ref #

Center Cap

Diameter

Width

Capacity

Finish

Style

Pilot

Offset

Bolt Pattern

Description Steel Wheel

Modular Wheels 345545WM1

7600100

13"

4-1/2"

1468

White

Mod

2.99

0

545

9700079

240545WM1

7600100

12”

4”

1045

White

Mod

2.95

0

545

Steel Wheel

9700830

460545WM1

7600102

14"

6"

1869

White

Mod

3.27

0

545

Steel Wheel

9700760

550545SM1

7600101

15"

5"

1870

Silver

Mod

3.19

0

545

Steel Wheel

9700765

550547SM1

7600102

15"

5"

1870

Silver

Mod

3.31

-0.55

5475

Steel Wheel

9700770

550550SM1

7600101

15"

5"

1870

Silver

Mod

3.19

0

550

Steel Wheel

9700932

550555SM1

7600103

15"

5"

1870

Silver

Mod

4.25

-0.67

555

Steel Wheel

9700835

550545WM1

7600101

15"

5"

1870

White

Mod

3.19

0

545

Steel Wheel

9700670

550547WM1

7600102

15"

5"

1870

White

Mod

3.31

-0.55

5475

Steel Wheel

9700840

550550WM1

7600101

15"

5"

1870

White

Mod

3.19

0

550

Steel Wheel

9700550

CH1545

7600101

15"

6"

2050

Chrome

Mod

3.19

0

545

Steel Wheel

9700555

CH155

7600102

15"

6"

2050

Chrome

Mod

3.31

0

550

Steel Wheel

9700560

CH15655

7600103

15"

6"

2540

Chrome

Mod

4.25

0

655

Steel Wheel

9700775

560545SM2

7600101

15"

6"

2600

Silver

Mod

3.19

0

545

Steel Wheel

9700776

560550SM1

7600102

15"

6"

2600

Silver

Mod

3.31

0

550

Steel Wheel

9700780

560655SM1

7600103

15"

6"

2600

Silver

Mod

4.25

0

655

Steel Wheel

9700845

560545WM1

7600102

15"

6"

2600

White

Mod

3.31

0

545

Steel Wheel

9700850

560550WM1

7600102

15"

6"

2150

White

Mod

3.31

0

550

Steel Wheel

9700855

560655WM1

7600103

15"

6"

2600

White

Mod

4.25

0

655

Steel Wheel

9700060

CH166

7600103

16"

6"

3000

Chrome

Mod

4.25

0

655

Steel Wheel

9700112

1750865W8125

7600104

17.5"

6.75”

5956

White

Mod

8.70

0

865

Steel Wheel

9700785

660655SM1

7600103

16"

6"

3500

Silver

Mod

4.25

0

655

Steel Wheel

9700790

660865SM1L

7600105

16"

6"

3750

Silver

Mod

5.12

0

865

Steel Wheel

9700791

660865SM3

7600104

16"

6"

3960

Silver

Mod

4.88

0

865

Steel Wheel

9700860

660655WM1

7600103

16"

6"

3500

White

Mod

4.25

0

655

Steel Wheel

9700865

660865WM1

7600105

16"

6"

3750

White

Mod

5.12

0

865

Steel Wheel

9700875

660865WM3

7600104

16"

6"

3960

White

Mod

4.88

0

865

Steel Wheel

9700510

AL166

7600103

16"

7"

3200

Aluminum

Mod

4.25

0

655

Aluminum Wheel

9700890

240545WS1

7600100

12"

4"

1100

White

Spoke

2.95

0

545

Steel Wheel

9700900

345545WS1

7600100

13"

4-1/2"

1468

White

Spoke

2.99

0

545

Steel Wheel

9700905

460545WS1

7600102

14"

6"

1869

White

Spoke

3.27

0

545

Steel Wheel

9700800

550550SPS1

7600102

15"

5"

1870

Silver

Spoke

3.27

0

550

Steel Wheel

9700915

550545WS1

7600102

15"

5"

1870

White

Spoke

3.31

0

545

Steel Wheel

Spoke Wheels

9700920

550547WS1

7600102

15"

5"

1870

White

Spoke

3.31

-0.31

5475

Steel Wheel

9700925

550550WS1

7600101

15"

5"

1870

White

Spoke

3.19

0

550

Steel Wheel

9700930

550555WS1

7600103

15"

5"

1870

White

Spoke

4.25

-0.67

555

Steel Wheel

9700935

560545WS2

7600101

15"

6"

2600

White

Spoke

3.19

0

545

Steel Wheel

9700945

560550WS1

7600102

15"

6"

2600

White

Spoke

3.31

0

550

Steel Wheel

9700950

560555SWA

7600103

15"

6"

2150

White

Spoke

4.25

0

555

Steel Wheel

9700955

560655WS1

7600103

15"

6"

2600

White

Spoke

4.25

0

655

Steel Wheel

9700960

660655WS1

7600103

16"

6"

3500

White

Spoke

4.25

0

655

Steel Wheel

9700965

66865WS569D

7600105

16"

6"

3750

White

Spoke

5.12

0

865

Steel Wheel

WWW.TEXTRAIL.COM

C-7

2010 Copyright by TexTrail, Inc.

TIRES & WHEELS

9700825


TIRES & WHEELS

TIRES & WHEELS

9400012

9400013

9400032

9400539

9400033

Dual Wheels Part #

Ref #

Load Range Center Cap Diameter

Width

Capacity

Finish

Style

Pilot

Offset

Bolt Pattern

Description

9700605

660865SDPK

-

16”

6”

3200

Silver

Dual

4.77

5.35

865

Dual Steel Wheel

9700620

6608655SDPK

-

16”

6”

3200

Silver

Dual

4.8

5.35

865

Dual Steel Wheel

9700057

1750875WD2

-

17-1/2"

6-3/4"

6500

White

Dual

6.50

6.19

10-875

Hub Piloted Wheel

9700600

1750865SP1125

-

17-1/2"

6-3/4"

6005

White

Single

4.75

-0.31

865

Steel Wheel

9700061

165675DF

-

16-1/2"

6-3/4"

-

Steel

Coined

-

-

865

Dual Steel Wheel

7600102

3.31

0

9700530

CH1055D

15"

6"

2050

Chrome

Directional

9700083

1750865WD4

17.5”

6.75”

5530

White

Dual

9700056

LT2532SP

17.5

6.75

6005

White

Single

9700720

660665GOEM

7600103

16"

6"

3200

Silver

OEM

9700038

16563TO

7600103

16"

7"

3000

Silver

OEM

Part #

Ref #

O.D.

S.W.

Ply Rating

Type

Maximum Load Capacity

550

Steel Wheel

8-275

Hub Piloted Wheel

.5

865

Steel Wheel

4.25

0

655

Steel Wheel

4.25

0

655

Full Face Steel Wheel

OEM Style Wheels

Tires Load Range

Maximum PSI

Description

9300315

TR20515

C

27.13

7.99

6

Radial

1820

50

Tire ST20575R15C Trailer Tire

9300319

TR22515

D

28.31

8.78

8

Radial

2600

65

Tire ST22575R15D Trailer Tire

9300323

TR23516E

E

30.40

9.25

10

Radial

3520

80

Tire ST23585R16E Trailer Tire

9300041

TKR23516

E

30.7

9.05

10

Radial

3520

80

Tire ST23580R16E Provider

9300044

TD235-16E

E

30.79

9.25

10

Bias

3520

80

Tire ST23580D16E

Maximum PSI

Bolt Pattern

Wheel Finish

Wheel Type

Description

440

White

OEM

5.70-8 Bias Ply

8" & 10" Wheel & Tire Assemblies Part #

Ref #

Load Range

O.D.

S.W.

Tire Size

Maximum Load Capacity

9400014

T0862E4RW

B

18.3

5.6

8x3.75

715

75

9400521

MT0864A4RW

C

18.3

5.6

8x3.75

910

100

440

White

OEM

5.70-8 Bias Ply

9400015

T0862E5RW

B

18.3

5.6

8x3.75

715

75

545

White

OEM

5.70-8 Bias Ply

9400522

T0864E5RW

C

18.3

5.6

8x3.75

910

100

545

White

OEM

5.70-8 Bias Ply

9400013

T0854E4RW

B

16.3

4.9

8x3.75

590

60

440

White

OEM

4.80-8 Bias Ply

9400012

T0854E5RW

B

16.3

4.9

8x3.75

590

60

545

White

OEM

4.80-8 Bias Ply

9400123

MT0872A4RA

B

18.2

8.4

8x7

770

35

440

Almond

OEM

18.5x8.5-8 Bias Ply

9400052

MT0872A5RA

B

18.2

8.4

8x7

770

35

545

Almond

OEM

18.5x8.5-8 Bias Ply

9400033

T1026E4RW

C

20.5

7.8

10x6

1105

50

440

White

OEM

20.5x8-10 Bias Ply

9400032

T1026E5RW

C

20.5

7.8

10x6

1105

50

545

White

OEM

20.5x8-10 Bias Ply

9400005

T1030E5RW

E

20.5

7.8

10x6

1535

90

545

White

OEM

20.5x8-10 Bias Ply

ONEstep Wheel Chock 9750027 One Step Tandem Wheel Chock

WWW.TEXTRAIL.COM

C-8

2010 Copyright by TexTrail, Inc.


TIRES & WHEELS

9400635

Part #

Load Ref # Range T1212ES4SW B MT1214AS4SWE C MT1226AS4SWE B T1228ES4SW C A12GS C A12WS C T1226ES5SW B T1228ES5SW C

Part #

Ref #

9400585 9400595 9400606 9400605

A13BWS A14B45WM A14B45SM A14B45WS

Part #

Ref #

9400620 9700615 9400625 9400030 9400626 9400636 9400635 9400645 9400671 9400695 9400651 9400612 9400613 9400650 9400656 9400655 9400614 9400003 9400616 9400665 9400618 9400681 9400705 9400680 9400685

A15B45SM A15B45WM A15B45WS A15B45CM A15B475WS A15B5SM A15B5WM A15B5WS A15B6SM A15B6WS A156R45SM A225B645SM A225R645SM A156R45WM A156B45WS A156R45WS A225B645WS A225R65SM A225B65WM A156R5WS A225B65WS A225B6SM A225R6SM A225B6WM A225R6WM

9400650

O.D.

S.W.

21.1 21.1 21.9 21.9 20.47 20.47 21.9 21.9

4.8 4.8 5.3 5.3 4.65 4.65 5.3 5.3

Load Range C C C C

Center Cap 7600102 7600102 7600102 7600102

Load Range C C C C C C C C C C C D D C C C D D D C D D D D D

Center Cap 7600102 7600101 7600101 7600102 7600102 7600101 7600101 7600101 7600103 7600103 7600102 7600102 7600102 7600102 7600101 7600101 7600101 7600102 7600102 7600102 7600102 7600103 7600103 7600103 7600103

O.D. 25.08 25.08 25.08 O.D. 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.91 27.13 29.02 28.31 27.13 27.91 27.13 29.02 28.31 29.02 27.13 29.02 29.02 28.31 29.02 28.31

WWW.TEXTRAIL.COM

9400681

12", 13" & 14" Wheel & Tire Assemblies Bolt Wheel Max Load Max PSI Pattern Size Capacity 12x4 780 60 440 12X4 990 90 440 12x4 840 60 440 12x4 1045 80 440 12x4 990 90 545 12x4 990 90 545 12x4 840 60 545 12x4 1045 80 545 13" & 14" Wheel & Tire Assemblies Max Load Wheel S.W. Max PSI Capacity Size 13x4.5 1360 50 7.83 14x6 1760 50 7.83 14x6 1760 50 7.83 14x6 1760 50 15" Wheel & Tire Assemblies Wheel Max Load S.W. Max PSI Capacity Size 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 8.03 15x5 1820 50 7.99 15x6 1820 50 8.86 15x6 2540 65 8.78 15x6 2600 65 7.99 15x6 1820 50 8.03 15x6 1820 50 7.99 15x6 1820 50 8.86 15x6 2540 65 8.78 15x6 2600 65 8.86 15x6 2540 65 7.99 15x6 1820 50 8.86 15x6 2540 65 8.86 15x6 2540 65 8.78 15x6 2600 65 8.86 15x6 2540 65 8.78 15x6 2600 65

C-9

23585R16

20575D15

Wheel Finish White White White White White White White

Wheel Type Spoke Spoke Spoke Spoke Spoke Spoke Spoke Spoke

Bolt Pattern 545 545 545 545

Wheel Finish White White Silver White

Wheel Type Spoke Spoke Mod Spoke

Bolt Pattern 545 545 545 545 5475 550 550 550 655 655 545 545 545 545 545 545 545 550 550 550 550 655 655 655 655

Wheel Finish Silver White White Chrome White Silver White White Silver White Silver Silver Silver White White White White Silver White White White Silver Silver White White

Wheel Type Mod Mod Spoke Mod Spoke Mod Mod Spoke Mod Spoke Mod Mod Mod Mod Spoke Spoke Spoke Mod Mod Spoke Spoke Mod Mod Mod Mod

Galvanized

Description 4.80-12 Bias Ply 4.80-12 Bias Ply 5.30-12 Bias Ply 5.30-12 Bias Ply 4.80-12 Bias Ply 4.80-12 Bias Ply 5.30-12 Bias Ply 5.30-12 Bias Ply

Description ST17580 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply Description ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Bias Ply ST20575 Radial Ply ST22575 Bias Ply ST22575 Radial Ply ST20575 Radial Ply ST20575 Bias Ply ST20575 Radial Ply ST22575 Bias Ply ST22575 Radial Ply ST22575 Bias Ply ST20575 Radial Ply ST22575 Bias Ply ST22575 Bias Ply ST22575 Radial Ply ST22575 Bias Ply ST22575 Radial Ply

2010 Copyright by TexTrail, Inc.

TIRES & WHEELS

9400010

9400539 9400053 9400545 9400074 9400541 9400002 9400547

9400613


TIRES & WHEELS

9400684

9400815

9400940

9400936

TIRES & WHEELS

15" Wheel & Tire Assemblies (Continued) Part #

Ref #

Load Range

Center Cap

O.D.

S.W.

Wheel Size

Max Load Capacity

Max PSI

Bolt Pattern

Wheel Finish

Wheel Type

9400684

A225B6WS

D

7600103

29.02

8.86

15x6

2540

65

655

White

Spoke

ST22575 Bias Ply

9400700

A225R6WS

D

7600103

28.31

8.78

15x6

2600

65

655

White

Spoke

ST22575 Radial Ply

Description

16" & 17-1/2" Wheel & Tire Assemblies Part #

Ref #

Load Range

Center Cap

O.D.

S.W.

Wheel Size

Max Load Capacity

Max PSI

Bolt Pattern

Wheel Finish

Wheel Type

Description

9400158

A16DE8HWS

E

7600105

-

-

16X6

3520

80

865

White

Spoke

ST235D16E-16X6865

9400172

A16DE8HSM

E

7600105

-

-

16X6

3520

80

865

Silver

Mod

ST23580D16E-16X6865

9400197

A16RGSM

G

7600105

-

-

16X6

3750

110

865

Silver

Mod

ST23585R16G-16X6865

9400722

A16RTK6SM

E

7600103

30.79

9.25

16x6

3500

80

655

Silver

Mod

ST23580R16E

9400723

A16RTK477

E

-

30.79

9.25

16x6

3080

80

865

Silver

Dual

4.75 Pilot ST23580R16E

9400717

A16DE488

E

-

30.71

9.06

16x6

3520

80

865

Silver

Dual

5.35 4.88 Pilot ST23580D16E

9400719

A16R488TK

E

-

30.79

9.25

16x6

3080

80

865

Silver

Dual

5.35 4.88 Pilot ST23580R16E

9400770

A16R477

E

-

30.79

9.25

16X6

3640

80

865

Silver

Dual

ST23585R16E-16X6865

9400765

A16B477

E

-

31.4

8.5

16x6

2755

75

865

Silver

Dual

5.5 4.75 Pilot 750 x 16 Bias Ply LRE

9400724

A16R6SM

E

-

30.79

9.25

16X6

3640

80

855

Silver

Mod

ST23585R16E-16X6655

9400795

A16R8WM

E

-

30.79

9.25

16X6

-

-

865

White

Mod

ST23585R16E-16X6865

9400806

A16RTK8SM

E

-

30.79

9.25

16x6

3520

80

865

Silver

Mod

ST23580R16E

9400815

A16RTK8WM

E

7600105

30.79

9.25

16x6

3520

80

865

White

Mod

ST23580R16E

9400804

A16RTK8WM5

E

7600105

30.79

9.25

16x6

3520

80

865

White

Mod

ST23580R16E

9400808

A16RTK8WS

E

7600105

30.79

9.25

16x6

3520

80

865

White

Spoke

ST23580R16E

9400810

A16R8WS

E

-

30.79

9.25

16X6

-

-

865

White

Spoke

ST23585R16E-16X6865

9400819

A16R8SM

E

-

30.79

9.25

16X6

-

-

865

White

Mod

ST23585R16E-16X6865

9400939

A215H/8H50

H

7600104

30.2

8.3

17.5x6.5

4540

123

8-275

White

Single

17mm No HH

H

-

30.2

8.3

17.5x6.5

4540

123

8-275

White

Dual

8.7 Pilot

9400936 A215H/17564WD 9400925

A235H/17564

J

-

31.4

9.2

17.5x6.75

5675

127

8-275

White

Dual

4HH

9400938

A215/8H19

H

7600104

30.2

8.3

17.5x6.75

4540

123

865

White

Single

Solid Face Radial -0.19

9400940

A215/8H31

H

7600104

30.2

8.3

17.5x6.75

4540

123

865

White

Single

Solid Face Radial No HH

9400944

A235J/8H19

J

7600104

31.4

9.2

17.5x6.75

5675

127

865

White

Single

Solid Face Radial No HH

9400942

A235J/8H50

J

7600104

31.4

9.2

17.5x6.75

5675

127

865

Silver

Single

Solid Face Radial No HH 0.05

9400946

A235J/8H31

J

-

31.4

9.2

17.5x6.75

5675

127

865

White

Single

Solid Face Radial 0.31

9400928

A215H/175WM

H

-

30.2

8.3

17.5x6.75

4540

123

865

White

Mod

9400158

9400172

WWW.TEXTRAIL.COM

9400197

C-10

9400719

9400810

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S

JACKS, COUPLERS & WINCHES

Table Of Contents - Jacks, Couplers & Winches Adjustable Clevis Adjustable Pintle Eye Adjustable Tongue Coupler A-Frame Coupler A-Frame Jack Agricultural & Industrial Winches Bolt-On Swivel Jack Coupler Latch Repair Kit Coupler Hardware Kit Direct Weld Swivel Jacks Draw Bar Dropleg Jack Dropleg Jack & Landing Gear Accessories Electric Winches EZ Jack Flat Mount Coupler Gooseneck Coupler Heavy Duty Jack Jack Repair Parts Jack Foot and Caster King Pin Landing Gear Marine Jack Nose Plate Retaining Ring Swivel Jack Pipe Mount Swivel Jack Round Tube Swivel Jack Power Jack Rack Post & Gearbox Scissor Jack Single Speed Winches Snap Ring Swivel Jack Square Tube Swivel Jack Stabilizer Jack Straight Tongue Coupler Superwinch Electric Winches Two Speed Winches Warn Electric Winches Wheel Chock Winch Strap WWW.TEXTRAIL.COM

D-1

D-4 D-4 D-4 D-3 D-8 D-15 D-11 D-6 D-4 D-10 D-6 D-12 D-13 D-16 D-12 D-5 D-5 D-12 D-8 D-14 D-5 D-13 D-7 D-6 D-11 D-9 D-9 D-11 D-14 D-11 D-15 D-11 D-0 D-12 D-2 D-16 D-15 D-16 D-12 D-15 2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S STRAIGHT TONGUE COUPLERS

1-7/8" Ball Bolt-On Straight Tongue Couplers

6750524

6750523

Ref # CT-2001-O 940-1 960-1 5105-24Z 970-1

Tongue Size 2" 2" 2-1/2" 2-1/2" 3"

Part# 6750524 6750045 6750523 6750526 6750044 6750562 6750528 6750046 6750019 6750527 6750020 6750529 6750530

Ref # CT-3001-O 22200 0500 CT-3001-Z CT-3002-O 22250 0500 982-2Z CT-3003-O 22300 0500 80051 CT-3003-Z 80055 CT-5003-Z CT-5003-O

Tongue Size 2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3" 3" 3" 3"

Part# 6750060 6750055 6750023 6750022 6750063 6750059

Ref # 80082 2B2 80060 2B4 3B4 2B5

Tongue Size 2" 2-1/4" 3" 3" 3" 3-1/2"

Finish Oily Oily Oily Zinc Oily

6750045

Capacity 2K 2K 2K 2K 2K

Latch Low-Pro Quick-Lock Quick-Lock Quick-Lock Quick-Lock

6750055

Collar Square Square Square Square Square

6750022

Description Pacific Rim Dutton-Lainson Dutton-Lainson Shebly Dutton-Lainson

JACKS, COUPLERS & WINCHES

Part# 6750522 6750041 6750043 6750207 6750042

6750020

2" Ball Bolt-On Straight Tongue Couplers Finish Oily Oily Zinc Oily Zinc Zinc Oily Oily Painted Zinc Zinc Zinc Oily

Capacity 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 3.5K 5K 5K

Latch Low-Pro Fas-Lok® Low-Pro Low-Pro Fas-Lok® Quick-Lock Low-Pro Fas-Lok® Low-Pro Low-Pro Low-Pro Low-Pro Low-Pro

Collar Square Square Square Square Square Square Square Square Square Square Square Square Square

Description Pacific Rim Bulldog Pacific Rim Pacific Rim Bulldog Dutton-Lainson Pacific Rim Bulldog Atwood Pacific Rim Atwood Pacific Rim Pacific Rim

2" Ball Weld-On Straight Tongue Couplers Finish Painted Painted Painted Painted Painted Painted

Capacity 5K 5K 5K 5K 7K 5K

Latch Low-Pro High-Pro Low-Pro High-Pro High-Pro High-Pro

Collar Square Round Square Square Square Round

Description Atwood Bulldog Collar-Lok™ Coupler Atwood Bulldog Collar-Lok™ Coupler Bulldog Collar-Lok™ Coupler Bulldog Collar-Lok™ Coupler

2-5/16" Ball Weld-On Straight Tongue Couplers Part# 6750028 6750026 6750029

Ref # 4B2 80131 4B4

Tongue Size 2-1/4" 3" 3"

Finish Painted Painted Painted

Capacity 12.5K 8-1/2K 12.5K

Latch High-Pro Ring-Latch High-Pro

Collar Round Square Square

Description Bulldog Collar-Lok™ Coupler Atwood Bulldog Collar-Lok™ Coupler

Need help finding your correct parts? Call any of our 6 locations today! East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568

West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725 WWW.TEXTRAIL.COM

Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134 D-2

Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143

Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955

Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S A-FRAME COUPLERS

A

B

JACKS, COUPLERS & WINCHES

6750502

Part# 6750509 6750502 6750500 6750054 6750135 6750070 6750512 6750062 6750505 6750504 6750074 6750075 6750033 6750507 6750506 6750508 6750008 6750178

C

6750505

Ref # CA-5110-O CA-5100-B CA-5100-O 80072 88555 43805W CA-5210-B 80101 CA-5200-B CA-5200-O 81911 82680 81912 CA-5400-B CA-5400-O CA-5400-Z 44314R 44150W

Ball 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16"

6750507

Tongue Size 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame 50° A-Frame

A

Part# 6750056 6750057 6750179 6750066 6750519 6750069 6750067 6750076 6750006 6750030 6750077

D

E

6750075

6750062

A-FRAME COUPLER Finish Capacity Oily 2K Blk Pwdr 5K Oily 5K Painted 5K Painted 8K Primed 8K Blk Pwdr 8K Painted 7.5K Blk Pwdr 10K Oily 10K Painted 10K Painted 13K Painted 13K Blk Pwdr 14K Oily 14K Zinc 14K Painted 14K Primed 15K

Latch Yoke Flip Flip Yoke Flip Wedge® Yoke Yoke Flip Flip Flip Flip Flip Flip Flip Flip Wedge® Wedge®

B

Ref # 2B8 2B8L 2A 3B8 CA-5190-B 3B8L 3B8L-LH 4B8 CA-5290-B 4B8L 4B8L-LH

Ball 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16"

6750510

Type E A A E B F E E B B B D B C C C B F

Description Pacific Rim Pacific Rim Pacific Rim Atwood Atwood Fulton Cast Pacific Rim Atwood Pacific Rim Pacific Rim Atwood Atwood Under mount Atwood Pacific Rim Pacific Rim Pacific Rim Bulldog Fulton Cast

Type B A A B C A A B C A A

Description Bulldog Bulldog Bulldog Bulldog Pacific Rim Bulldog Bulldog Less Jack Hole Bulldog Pacific Rim Bulldog Bulldog Less Jack Hole

C

Forged Collar-Style A-Frame Couplers Tongue Size Finish Capacity Latch 50° A-Frame Primed 5K Hi-Pro 50° A-Frame Primed 5K Low-Pro 50° A-Frame Primed 5K Low-Pro 50° A-Frame Primed 7K Hi-Pro 50° A-Frame Blk Pwdr 7K Low-Pro 50° A-Frame Primed 7K Low-Pro 50° A-Frame Primed 7K Low-Pro 50° A-Frame Primed 12.5K Hi-Pro 50° A-Frame Blk Pwdr 12.5K Low-Pro 50° A-Frame Primed 12.5K Low-Pro 50° A-Frame Primed 12.5K Low-Pro

WWW.TEXTRAIL.COM

F

D-3

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S Adjustable Couplers, Clevises & Pintle Eyes

6750061

6750027

6750010

6750563

8550027

8550050

Part#

Ref #

Holes

Length

Finish

Capacity

6750131

PS-AC01F

4

7-1/2"

Oily

24K

Weld-On 3-Position Channel Bracket for Adjustable Couplers

Type

Description

6750132

PS-AC02F

6

11-1/2"

Oily

24K

Weld-On 5-Position Channel Bracket for Adjustable Couplers

7030001

B9020

5/8"-11

4/12"

-

-

Grade 8

Hardware Kit for Adjustable Couplers 2ea Nuts & Bolts

Part#

Ref #

Ball

Finish

Capacity

Latch

Bracket*

Bolts*

6750061

AH3

1-7/8"-2"

Oily

7K

Nut Ring

No

No

Buyers Adjustable Coupler

Description

6750064

3B6M

2"

Primed

7K

Pin Collar

No

Yes

Bulldog Adjustable Coupler

6750200

1040

2"

Primed

7K

Pin Collar

Yes

Yes

Bulldog Coupler with 4-hole Brkt

6750201

1040XL

2"

Primed

7K

Pin Collar

Yes

Yes

Bulldog Coupler with 6-hole Brkt

6750563

CTA-400

2-5/16"

Blk Pwdr Coat

14K

Flip

No

Yes

Pacific Rim Adjustable Coupler

6750195

A256C0300

2-5/16"

Oily

14K

Wedge速

No

Yes

Bulldog Adjustable Coupler

6750010

A256C0317

2-5/16"

Primed

14K

Wedge速

No

Yes

Bulldog Adjustable Coupler

6750027

4B6M

2-5/16"

Primed

12.5K

Pin Collar

No

Yes

Bulldog Adjustable Coupler

6750202

4B6MCB4

2-5/16"

Primed

12.5K

Pin Collar

Yes

Yes

Bulldog Coupler with 4-hole Brkt

6750203

4B6MCB6

2-5/16"

Primed

12.5K

Pin Collar

Yes

Yes

Bulldog Coupler with 6-hole Brkt

6750013

91035

2-5/16"

Primed

12.5K

Pin Collar

No

No

Buyers Adjustable Coupler

6750538

CTA-290

2-5/16"

Blk Pwdr Coat

12.5K

Pin Collar

No

Yes

Pacific Rim Adjustable Coupler

6750543

1051

2-5/16"

Blk Pwdr Coat

12K

Pin Collar

Yes

Yes

Pacific Rim Coupler with 4-hole Brkt

6750544

1051XL

2-5/16"

Blk Pwdr Coat

12K

Pin Collar

Yes

Yes

Pacific Rim Coupler with 6-hole Brkt

6750134

90100

2-5/16"

Painted

12K

Zinc Ring

Yes

Yes

Buyers Coupler with 6-Hole Brkt

6750513

CTA-14CB6

2-5/16"

Blk Pwdr Coat

14K

Flip

Yes

Yes

Pacific Rim Coupler with 6-hole Brkt

6750540

CTA-190

2"

Blk Pwdr Coat

7K

Flip

No

Yes

Pacific Rim Adjustable Coupler

6750083

91555

2-5/16"

Oily

15K

Flip

Yes

Yes

Buyers Coupler with 6-Hole Brkt

Part#

Ref #

Eye

Finish

Capacity

Bracket*

Bolts*

8550036

18128

3"

Oily

12K

Yes

Yes

Adjustable Pintle Eye with 4-hole Brkt

8550037

18128XL

3"

Oily

12K

Yes

Yes

Adjustable Pintle Eye with 6-hole Brkt

8550027

16137

3"

Oily

14K

No

No

Adjustable Pintle Ring / Drawbar

8850001

E-66

3"

Oily

20K

No

No

Adjustable Pintle Ring / Drawbar

Part#

Ref #

Pin Hole

Finish

Capacity

Bracket*

Bolts*

8550050

CL20XL8

1"

Oily

20K

Yes

Yes

Adjustable Clevis with 6-hole Brkt

Description

Description

8550052

9095

3/4"

Oily

12K

Yes

Yes

Adjustable Clevis with 4-hole Brkt

8550053

9095XL

3/4"

Oily

12K

Yes

Yes

Adjustable Clevis with 6-hole Brkt

8550013

1807800

1"

Oily

20K

No

No

Adjustable Clevis

8550051

0897900

3/4"

Oily

12K

No

No

Adjustable Clevis

* Included with Part Number

WWW.TEXTRAIL.COM

D-4

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

Adjustable Couplers, Clevises & Pintle Eyes


J AC K S , CO U P L E R S & W I N C H E S GOOSENECK COUPLERS

6750051

6750039

6750050

6750037

Ref #

Capacity

Type

6750035 6750005 6750531 6750016 6750532 6750039 6750037 6750534 6750036 6750535 6750192 6750002 6750533 6750208 6750536 6750051 6750050 6750017 6750124 6750118

287620300 GCPN-20000 GC-20000 287740300 GC-24000 LL2516ST GN24 GCPN-25000 289600300 GCSQ-25000 289500300 GCPN-30000 GC-30000 28900

20K 20K 20K 20K 24K 25k 24K 25K 25K 25K 30K 30K 30K 30K 30K 30K 30K -

Round Round Round Round Square Round Square Square Round Round Round Square Square Square -

No Pin Set Screws Set Screws Pin Pin Pin Pin Pin Pin Set Screws Pin Pin Pin -

GCSQTW-30000

GN2516 LL2516BH SM2516M36 23108 K1-P

6750536

6750035

6750208

Gooseneck Couplers O.D. Adjust Extended Height Description 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4-1/2" 4" -

8" 8" 8" 10" 8" 8" 8" 8" 8" 8" 7" 7" 10" -

37-1/4" 38" 38" 38" 37-1/4" 40" 40" 37-1/4" 37-1/4" 38" 39" 39" 38" -

Bulldog Gooseneck with Cap Pacific Rim Gooseneck 0.215" Thick with Pin Pacific Rim Gooseneck 0.215" Thick with Set Screws Bulldog Gooseneck Head Kit Pacific Rim Gooseneck 0.240" Thick with Set Screws TEMCO Gooseneck Autolock Top Wind with Pin Bulldog Gooseneck Head Kit Pacific Rim Gooseneck 0.240" Thick with Pin Bulldog Gooseneck with Pin Pacific Rim Gooseneck 0.240" Thick with Pin Bulldog Gooseneck with Pin Pacific Rim Gooseneck 0.300" Thick with Pin Pacific Rim Gooseneck 0.300" Thick with Set Screws Bulldog Gooseneck Top Wind with Pin Pacific Rim Gooseneck 0.275" Thick with Pin TEMCO Gooseneck Head Kit with K1 Manual Pin Lock TEMCO Gooseneck Top Wind TEMCO Gooseneck Jamb Nut Bulldog Gooseneck Set Screw TEMCO 1/2" Pin for Gooseneck Head

Gooseneck King Pin Adapters 7150033

Part#

Ref #

Size

Type

With Skid Plate

7350486 7150033 6750137 7150057

GN5 15085 15086 15087

4" 4" 4" 4"

Square Round Round Round

Yes Yes Yes Yes

Description Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter w/ 3/4” pin Gooseneck King Pin Adapter w/ 3/4” pin

Gooseneck Extender Part#

Ref #

I.D.

Type

6750206

4200

4"

Round

Capacity Description 24K

10” Gooseneck Extender

Gooseneck King Pins Part#

Ref #

Size

Type

7150016 7150018

KP20038 KP20050

2" 2"

Weld-On Weld-On

Description

Part#

Ref #

Ball

6750040

75074

2-5/16"

25K

Atwood Flat Mount Coupler

2-5/16”

20K

Bulldog Flat Mount Coupler

King Pin with 3/8" Bolster Plate King Pin with 1/2" Bolster Plate

Flat Mount Couplers

6750040

6750009

6750009 44200-0317

WWW.TEXTRAIL.COM

Capacity Description

D-5

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

Part#

Pin / Screw

6750532


J AC K S , CO U P L E R S & W I N C H E S

JACKS, COUPLERS & WINCHES

DRAW BARS & NOSE PLATES

Draw Bars & Nose Plates Part#

Ref #

Capacity

Section

Holes

I.D.

Mounting Hole Size

Finish

8550004

BDB125015

42K

1-1/2"

4

2-1/2"

-

Blk Pwdr Coat

Forged Drawbar

8550006

BDB1385

60K

1-5/8"

4

3"

25/32"

Blk Pwdr Coat

Heavy Duty Forged Drawbar

8550047

BDB1394

90K

1-5/8"

4

3"

57/64"

Blk Pwdr Coat

Heavy Duty Forged Drawbar

8550008

BDB12503

15K

1-1/2"

-

2-1/2"

-

Plain

Forged Alloy Steel Drawbar with Washer, Nut & Pin

8550038 BDB12492H

45K

1-5/8"

-

3"

-

Plain

Forged Alloy Steel Drawbar with Washer, Nut & Pin

8550007

LW10

10K

1"

-

2-1/2"

-

Plain

C1020 Steel Forged Drawbar

8550045

TNP716750

-

-

8

-

21/32"

Blk Pwdr Coat

3/4" Thick Trailer Nose Plate for 8550004

8550046

TNP716100

-

-

8

-

25/32"

Blk Pwdr Coat

1" Thick Trailer Nose Plate for 8550006 & 8550047

Description

Coupler Repair Parts Part# 6750098

Ref #

Description

CT-3000-RK Pacific Rim 2" Straight Coupler Latch Repair Kit

6750097 CA-5100-RK Pacific Rim 2" A-Frame Coupler Latch Repair Kit 7030047

24200

Bulldog 2" & 2-5/16" Hi-Profile Coupler Repair Kit (includes handle, pin & retainer)

6750114

560801

Fulton Hand Wheel Coupler Repair Kit

6750111

600801

Fulton Fas-Lok® 5K Coupler Repair Kit

6750015

15775

Atwood 2" Yoke Style Coupler Repair Kit

6250123

88551

Atwood 2" Coupler Repair Kit

6750221

15774

Atwood 2-5/16" Coupler Repair Kit

6750112

-

3750118

GN-2516

Coupler Pin K-1 Lock. Replacment for 6750051 (See page D-5)

3750119

025230

Coupler Safety Pin Fas-Lok® w/pull ring

6750120

0252010201

Coupler Snapper Pin 5/16 x 2-3/4” for Low-Pro Coupler w/ Chain

6750186

0233060301

Coupler Pin Gooseneck Pull Pin Assembly 3/4 load bearing pin

6750210

1542S01

6750112

Coupler Latch Kit Fas-Lok®. for Class II Coupler

Coupler Latch Kit GN24 Gooseneck Coupler Head

6750118

WWW.TEXTRAIL.COM

6750120 D-6

6750210

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S MARINE JACKS

7950231

7950519

7950232

7950266

7950038

7950084

7950228

7950518

Bolt-On Side Wind Marine Jacks Ref #

7950229 141005 7950515 MJ1200B 7950516 MJ1200BBX 7950038 XP10 7950084 XP15 7950228 XPD15L 7950266 MJ1500B 7950518 MJ1500BDWL 7950231 141302 7950232 141304 7950089 TJ503 7950083 87535

Travel

10" 10" 10" 10" 12" 10" 12" 10" 10" 10" 10"

Retracted Height 14.5" 12.7" 12.7" 12.75" 12.75" 12.75" 12.7" 12.5" 12.75" 7.80"

Extended Height 23.25" 23.25" 22.75" 22.75" 24.75" 25.25" 25.25" 22.75" 18.10"

Clearance

4.5" 10.5" 12.5" 10.50" 8.70"

Pull Pin 3/8" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 9/16" 9/16" 3/8"

Caster

Capacity

Mounting

1 - 6" 1 - 6" 1 - 6" 1 - 6" 1 - 8" 2- 6" 1 - 8" 2 - 6" 1 - 7" 1 - 7" 1 - 6" 1 - 6"

0.4K 1.2K 1.2K 1.2K 1.5K 1.5K 1.5K 1.5K 1.6K 1.6K 0.8K 0.8K

Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" 3" x 3" or 4" 3" x 3" or 4" Up to 3" x 5" Up to 3" x 5"

Description

Fulton Swivel Trailer Stand Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack - Boxed Fulton Swing Away Jack Fulton HP Swivel Swing Away Jack Fulton HP Swivel Swing Away Jack Pacific Rim Swing Away Jack Pacific Rim Swing Away Jack Fulton F2 Series Jack Twin Track Fulton F2 Series Jack Wide Track Fulton S Series Marine Zinc Jack Atwood Zinc Jack less mounting bracket

Weld-On Side Wind Marine Jacks

7950556

Part#

Ref #

7950235 TJ1222 7950265 MJ-1500W 7950556 HD2500 7950539 MJSQ-2500B

Travel

15" 10" 28"

Retracted Height 11" 12.7" 7" 7"

Extended Height 26" 25.25" 35.5" 25.25"

7950539

Clearance

19.25" 19" -

Pull Pin 1/2" 9/16" 1/2"

Caster

Capacity

Mounting

1 - 6" 1 - 8" Foot Foot

1K 1.5K 2.5K 2.5K

Up to 3" x 5" Up to 3" x 5" Up to 3" x 5" Up to 3" x 5"

Description

Fulton Fixed Mount Jack No Hardware Pacific Rim Swing Away Jack Fulton Fixed Mount Heavy Duty Square Jack Pacific Rim Heavy Duty Square

Flip-Up Jack Part# Ref # Description 7950300 88-00-6500 Fastway Flip Jack Foot (Fits 2-1/4� Jack)

WWW.TEXTRAIL.COM

D-7

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

Part#


J AC K S , CO U P L E R S & W I N C H E S

JACKS, COUPLERS & WINCHES

A-FRAME JACKS

Atwood’s Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning.

7950159

7950019

7950056

7950210

7950061

7950501

7950497

7950503

Atwood's Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning. Part# Ref # Capacity A B C D Handle Finish Description 155300 Top Wind Primed Bulldog with removable steel wheel* 7950055 1K 27” 12” 17” 15” 7950039

80511

2.5K

36.38”***

10.12”

26.25”***

10” per minute

-

Poly Cover / Paint

Atwood Standard 12V Power Jack

7950040

80515

2.5K

36.38”***

10.12”

26.25”***

10” per minute

Override Side

Poly Cover / Paint

Atwood Deluxe 12V Power Jack

7950045

87510

2K

24.90”

8.40”

16.50”

14”

Side Wind

Painted Poly Cover / Paint

Atwood less foot / caster

7950159

80530

3.5K

36.38”***

10.12”

26.25”***

15” per minute

Override Side

7950061 7950057 7950043 7950054 7950056 7950188 7950195

80391

21.60” 22.20” 22.40” 22.50” 23.80” 20.40” 23.20”

10.90” 9” 8.40” 7.5” 8.80” 5.40” 8.20”

10.70” 13.20” 13” 17” 12.20” 16” 12.20”

14” 15” 14” 15” 15” 15” 15”

Top Wind

Painted

Atwood less foot / wheel

Top Wind

Painted

Atwood less foot / wheel

Top Wind

Zinc

Top Wind

Primed

Bulldog with welded disc foot

Top Wind

Primed

Bulldog less base / wheel*

Top Wind

Primed

Bulldog less base / wheel*

155042**

5K 2K 2K 2K 2K 2K 2K

Top Wind

Primed

Bulldog less base / wheel* **

7950222

155154**

2K

26.90”

11.90”

19”

15”

Side Wind

Primed

Bulldog with removable poly wheel* **

7950019 7950193 7950210

175000

5K 5K 2K

27.60” 25.30” 22.50”

12.60” 10.30” 8.50”

12.40” 10.20” 14”

15” 15” 15”

Top Wind

Painted

Eclipse less foot base

Top Wind

Primed

Bulldog less base / wheel*

80401 155028 155100 155022 155033

155032 5792Z

Atwood Heavy Duty 12V Power Jack

Fulton with wheel

Side Wind

Zinc

Shelby less base / wheel Pacific Rim less base / wheel

7950497

TJA2000B

2K

20”

8”

12”

14”

Top Wind

Powder Coated

7950501

TJA2000Z

2K

20”

8”

12”

14”

Top Wind

Zinc

Pacific Rim less base / wheel

7950502

TJA2001B

2K

20”

5”

15”

14”

Top Wind

Powder Coated

Pacific Rim less base / wheel

7950503

TJA2000S

2K

25”

9”

16”

14.5”

Side Wind

Powder Coated

Pacific Rim less base / wheel

7950504

TJA2002B

2K

23”

9”

14”

15”

Top Wind

Powder Coated

Pacific Rim less base / wheel

7950505

TJA5000B

5K

20”

10.50”

9.50”

14”

Top Wind

Powder Coated

Pacific Rim less base / wheel

7950239

TJA2000HD

Top Wind Crank for up to 5K Jacks black

* Equipped with brackets for weld-on or bolt-on application.

** Obsolete. Available until inventory is exhausted.

***Note: 11-1/2” motor height is added to Power Jack Heights. WWW.TEXTRAIL.COM

D-8

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S ROUND TUBE PIPE MOUNT SWIVEL JACKS

7950067

Ref # Capacity TJP2001SB 2K 158151 2K 158110 2K 158451 2K TJP2001B 2K 158452 2K TJP2002B 2K 178201 5K TJP5001SB 5K 178203 5K TJP5002SB 5K 178101 5K TJP5001B 5K 82471 5K 178151 5K TJP5002B 5K 198150 7K TJP7001SB 7K TJP7001SZ 7K 198250 7K 198100 7K 198200 7K

7950016-01

7950090

7950242

7950532

7950535

7950269

7950525

Round Tube Pipe Mount Swivel Jacks A B C D Handle Finish Pin Description 17.50” 11.25” 6.25” 10” Side Wind Painted 9/16" With pipe end, foot plate & handle 26.70” 14.50” 12.20” 15” Side Wind Primed 9/16" With pipe end, foot plate & handle 17.20” 10.80” 6.40” 15” Side Wind Primed 9/16" With pipe end, foot plate & handle 15” 11” 4” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 15.25” 11.25” 4” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 24.50” 14.50” 10” 15” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 20.258” 15” 5.25” 15” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 17.50” 10.40” 6.40” 10” Side Wind Primed 5/8" With pipe end, foot plate & handle 17.50” 11.25” 6.25” 10” Side Wind Painted 5/8" With pipe end, foot plate & handle 21.80” 15.40” 6.40” 15” Side Wind Primed 5/8" With pipe end, foot plate & handle 23.25” 16.25” 7” 15” Side Wind Painted 5/8" With pipe end, foot plate & handle 15.25” 11.25” 4” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 15.25” 11.25” 4” 10” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 25.50” 11” 14.50” 14.70” Top Wind Painted 7/8" Less pipe end. With foot plate & handle 24.70” 14.70” 10” 15” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 20.25” 15” 5.25” 15” Top Wind Painted 9/16" With pipe end & red knob fold-away handle 17.40” 11” 6.40” 10” Side Wind Primed 5/8" With pipe end, foot plate & handle 18.50” 11.50” 7” 10” Side Wind Painted 5/8" With pipe end, foot plate & handle 18.50” 11.50” 7” 10” Side Wind Zinc 5/8" With pipe end, foot plate & handle 22.40” 16” 6.40” 15” Side Wind Primed 5/8" With pipe end, foot plate & handle 15.30” 10.80” 4.50” 10” Top Wind Primed 9/16" With pipe end & red knob fold-away handle 20.05” 15.80” 4.25” 15” Top Wind Primed 9/16" With pipe end & red knob fold-away handle * Bracket height provided. In some cases height bracket differs from clearance height. Replacement Parts Part# Ref # Description 7950129-7950131

7950162-01

7950069

7950239

7950102

WWW.TEXTRAIL.COM

7950105

7950248

7950108

D-9

7950242

TJPB-HD

Bulldog 150-160-170/RAM Red Top Wind Handle

7950108

500148

Bulldog 190 Black Top Wind Jack Handle

7950102

500171

Bulldog 190 Black Side Wind Jack Handle 0.85" RAD

7950097

500256

Bulldog Side Wind Handle & Gear Kit 0.8K, 1K & 5K

7950096

500105

Bulldog Black Side Wind Handle 0.8K - 5K 0.65" RAD

7950105

500244

Bulldog Detachable 5K Jack Foot

7950090

500245

Bulldog Detachable 0.8K Poly Jack Caster

7950512

JC101

Pacific Rim Detachable 1.2K Poly Jack Caster

7950013

017125

Bulldog Detachable 1K Steel Jack Caster

7950129

500238

5/8" Pin Weld-On Female Pipe Jack Mount

7950131

500239

9/16" Pin Weld-On Male Pipe Jack Mount

7950130

500240

5/8" Pin Weld-On Male Pipe Jack Mount

7950021

82500

7/8" Pin Weld-On Male Pipe Jack Mount

7950239

TJA2000HD

Pacific Rim Black Top Wind Jack Handle

7950242

TJPD-HD

Pacific Rim Red Top Wind Jack Knob

7950248

PLGPIN-12

Pacific Rim 1/2" Swivel Jack Pin Kit

7950162-01

Jack Foot Pin 9/16” x 3-1/2” w/Chain for HB & RAM

7950016-01

Jack Pin 9/16” x 3-1/2” w/Chain for Swivel HB & RAM

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

Part# 7950540 7950044 7950048 7950046 7950525 7950050 7950527 7950066 7950532 7950065 7950535 7950064 7950530 7950067 7950069 7950533 7950079 7950541 7950269 7950080 7950081 7950078

7950046


J AC K S , CO U P L E R S & W I N C H E S

JACKS, COUPLERS & WINCHES

SQUARE TUBE SWIVEL JACKS

7950253

7950077

7950271

7950236

7950237

7950181

Square Tube Round Pipe Mount Swivel Jacks Part#

Ref #

Capacity

Travel

Retracted Height

Extended Height

Clearance *

Handle

Finish

Description

7950249

195306

5K

15"

15.20"

30.20"

7"

Top Wind

Primed

Round Mount Fixed Leg Jack with pipe end, foot plate & handle

7950236

TJDP-5000FLB

5K

15"

24"

39"

*15.20"

Top Wind

Painted

Round Mount Fixed Leg Jack with pipe end, foot plate & handle

7950253

195356

5K

15"

15.10"

30.10"

9.25"

Side Wind

Primed

Round Mount Fixed Leg Jack with pipe end, foot plate & handle

7950237

TJDP-5000SFLB

5K

15"

24"

39"

*15.20"

Side Wind Painted

Round Mount Fixed Leg Jack with pipe end, foot plate & handle

7950271

190705

8K

10"

11.41"

21.41"

4.25"

Top Wind

Primed

Round Mount Fixed Leg Jack with pipe end, foot plate & handle

Extended Height

Clearance *

Handle

Finish

Description

Square Tube Square Pipe Mount Swivel Jacks Part#

Ref #

Capacity

Travel

Retracted Height

7950254

195312

5K

15"

15.20"

30.20"

7"

Top Wind

Primed

Square Mount Fixed Leg Jack with pipe end, foot plate & handle

7950258

195362

5K

15"

15.10"

30.10"

9.25"

Side Wind

Primed

Square Mount Fixed Leg Jack with pipe end, foot plate & handle

Direct Weld - Square Tube Square Pipe Mount Jacks Part#

Ref #

Capacity

Travel

Retracted Height

Extended Height

Clearance *

Handle

Finish

Description

7950077

SWL190DL

8K

15"

25.06"

53.56"

-

Side Wind

Primed

Square Mount Drop Leg Jack with pipe end, foot plate & handle

7950076

TWL190DL

8K

15"

22.66"

51.41"

-

Top Wind

Primed

Square Mount Drop Leg Jack with pipe end, foot plate & handle

7950238

TJD5000

5K

15"

24.50"

39.50"

-

Top Wind

Painted

Square Mount Drop Leg Jack with pipe end, foot plate & handle

7950543

TJD5000S

5K

15"

24.50"

39.50"

-

Side Wind Painted

Square Mount Drop Leg Jack with pipe end, foot plate & handle

7950181

TJD7000

8K

15"

23.50"

38.50"

-

Top Wind

Painted

Square Mount Drop Leg Jack with pipe end, foot plate & handle

7950182

TJD7000S

8K

15"

23.50"

38.50"

-

Side Wind Painted

Square Mount Drop Leg Jack with pipe end, foot plate & handle

* Bracket height provided. In some cases height bracket differs from clearance height.

WWW.TEXTRAIL.COM

D-10

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S JACKS CONTINUED Weld-On Retaining Ring Swivel Jacks

7950047

Part#

Ref #

Capacity

Travel

Retracted Height

Extended Height

Clearance

Handle

Finish

Pin

Description

7950047

151401

2K

10"

11"

21"

4"

Top Wind

Primed

1/2"

Weld-On Swivel Jack

7950049

151101

2K

10"

11"

21"

6.40"

Side Wind

Primed

1/2"

Weld-On Swivel Jack

7950051

151421

2K

15"

14.50"

29.50"

10"

Top Wind

Primed

1/2"

Weld-On Swivel Jack

7950062

171401

5K

10"

11.25"

21.25"

4"

Top Wind

Primed

1/2"

Weld-On Swivel Jack

7950063

171412

5K

15"

14.50"

29.50"

10"

Top Wind

Primed

1/2"

Weld-On Swivel Jack

Electric Jacks Ref #

Capacity

Travel

Retracted Height

Extended Height

Clearance

Handle

Finish

7950158

80236

1.5K

10" per minute

24.88"

39.25"

14.75"

-

Poly Cover / Paint

Atwood Lightweight 12V Power Jack

7950039

80511

2.5K

10" per minute

24.88"

39.25"

14.75"

-

Poly Cover / Paint

Atwood Standard 12V Power Jack

7950040

80515

2.5K

10" per minute

24.88"

39.25"

14.75"

Override Side

Poly Cover / Paint

Atwood Deluxe 12V Power Jack

7950159

80530

3.5K

15" per minute

24.88"

39.25"

14.75"

Override Side

Poly Cover / Paint

Atwood Heavy Duty 12V Power Jack

Description

Atwood's Heavy Duty Power Jack features a Ball Screw with recirculating ball bearing technology for more efficient and precise positioning.

Retaining Ring and Bolt-On Side Wind Swivel Jacks - Up to 3" x 5" Mounting

7950228

Part#

Ref #

Travel

Retracted Height

Extended Height

Clearance

Pin

Caster

Capacity

7950229

141005

-

14.5"

-

4.5"

3/8"

1 - 6"

0.4K

Fulton Swivel Trailer Stand

7950089

TJ503

10"

12.75"

22.75"

10.50"

3/8"

1 - 6"

0.8K

Fulton S Series Marine Zinc Jack

7950083

87535

10"

7.80"

18.10"

8.70"

1 - 6"

0.8K

Atwood Zinc Jack less mounting bracket

7950515

MJ1200B

10"

12.7"

23.25"

-

1/2"

1 - 6"

1.2K

Pacific Rim Swing Away Jack

7950516 MJ1200BBX

10"

12.7"

23.25"

-

1/2"

1 - 6"

1.2K

Pacific Rim Swing Away Jack - Boxed

7950038

XP10

10"

12.75"

22.75"

10.5"

1/2"

1 - 6"

1.2K

Fulton Swing Away Jack

7950084

XP15

10"

12.75"

22.75"

12.5"

1/2"

1 - 8"

1.5K

Fulton HP Swivel Swing Away Jack

7950266

MJ1500B

10"

12.7"

25.25"

-

1/2"

1 - 8"

1.5K

Pacific Rim Swing Away Jack

7950228

XPD15L

12"

12.75"

24.75"

-

1/2"

2- 6"

1.5K

Fulton HP Swivel Swing Away Jack

7950518

MJ1500BDWL

12"

12.5"

25.25"

-

1/2"

2 - 6"

1.5K

Pacific Rim Swing Away Jack

7950231

141302

10"

-

-

-

9/16"

1 - 7"

1.6K

Fulton F2 Series Jack Twin Track*

7950232

141304

10"

-

-

-

9/16"

1 - 7"

1.6K

Fulton F2 Series Jack Wide Track*

7950519

MJ1001B

10"

12.7"

23.25"

-

1/2"

1 - 6"

1K

Description

Pacific Rim Swing Away Jack

* Mounting options for this jack is 3" X 3" or 3" X 4" only.

Leveling Scissor Jack

7950800 7950801

Part#

Ref #

Travel

Retracted Height

Extended Height

Capacity

7950800

20036

-

-

-

-

7950801

24009

21"

4"

24"

5K

Description Hex Drive Forged Socket End Zinc Crank Black Rubber Grip Handle Weldable E-Coated RV Leveling Scissor Jack

This RV Leveling Scissor Jack provides a sandwich construction bearing design to assist in screw operation. Tooth gear design of the scissor arms ensures straight line vertical extension and retraction. Double lead thread drive engineering enables quick deployment of this jack.

WWW.TEXTRAIL.COM

D-11

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

7950159

Part#


J AC K S , CO U P L E R S & W I N C H E S HEAVY DUTY JACKS

7950562

7950148

7950030

7950022

7950255

7950256

7950250

7950209

JACKS, COUPLERS & WINCHES

Heavy Duty Direct Weld Drop Leg Jacks - Non Spring Return Ref #

Capacity

Lift

Retracted Height

Extended Height

Handle

Handle Included

Pin

Description

7950250

LG8700-31

12K

13.50"

24.38"

49.87"

Side Wind

No

Side

Non-Spring Return Jack

7950255

LGD700-21

20K

12"

24.38"

50.38"

Side Wind

No

Side

Non-Spring Return Jack

7950030

182415

12K

12.25"

28.60"

54.60"

Side Wind

No

Front

Non-Spring Return Jack

7950147

TJD-12000-FG2

12K

12.25"

28.60"

54.60"

Side Wind

Yes

Front

Non-Spring Return Jack

7950031

182400

12K

12.25"

27.40"

43.30"

Top Wind

No

Side

Non-Spring Return Jack

7950145

TJD-12000-RG2

12K

12.25"

27.40"

43.30"

Side Wind

Yes

Side

Non-Spring Return Jack

7950562

TJD-12000TW-R

12K

12.25"

23.50"

49"

Top Wind

Yes

Side

Non-Spring Return Jack

7950026

182301

12K

12.25"

23.40"

49.40"

Top Wind

Yes

7950223

182415H

12K

12.25"

28.60"

54.60"

Side Wind

Yes

Front

Non-Spring Return Jack Kit

7950034

182400H

12K

12.25"

27.40"

43.30"

Side Wind

Yes

Side

Non-Spring Return Jack Kit

Part#

Non-Spring Return Jack

Heavy Duty Direct Weld Drop Leg Jacks - Spring Return Part#

Ref #

Capacity

Lift

Retracted Height

Extended Height

Handle

Handle Included

Pin

Description

7950209

DLPN20045SP-FG2

12K

12.25"

26.50"

38.75"

Side Wind

Yes

Dual

Spring Return Jack

7950251

LG8700-31SL

12K

13.50"

24.38"

49.87"

Side Wind

No

Side

Spring Return Jack

7950256

LGD700-21SL

20K

12"

24.38"

50.38"

Side Wind

No

Dual

Spring Return Jack

7950170

182815

12K

12.25"

28.60"

54.60"

Side Wind

No

Front

Spring Return Jack

7950148

TDJ-12000SP-FG2

12K

12.50"

28.50"

54"

Side Wind

Yes

Front

Spring Return Jack

7950022

182800

12K

12.50"

27.40"

56.60"

Side Wind

No

Side

Spring Return Jack

7950146

TDJ-12000SP-RG2

12K

12.50"

28.50"

54"

Side Wind

Yes

Side

Spring Return Jack

7950118

182815H

12K

12.25"

28.60"

54.60"

Side Wind

Yes

Front

Spring Return Jack Kit

7950224

182800H

12K

12.50"

27.40"

56.60"

Side Wind

Yes

Side

Spring Return Jack Kit

Stabilizer Jack

7950023

Part#

Ref #

Capacity

Lift

Retracted Height

Extended Height

7950023

82301

0.65K

6"

11.50"

17.75"

7950098

80480

Description Single Stabilizer Jack Stabilizer Handle

Wheel Chocks

7040013

Part#

Ref #

Size

Eye

Handle

Description

7040013

4121-8

8"

Yes

No

Rumber Wheel Chock

7040014

4121-8-HD

8"

No

Yes

Rumber Wheel Chock

EZ Jack 9750001

Part#

Ref #

Capacity

Finish

9750001

EZ-JACK

20K

Aluminum

Description Heavy Duty Cast EZ Jack

See Page C-8 for Tandem Wheel Chocks

WWW.TEXTRAIL.COM

D-12

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S HEAVY DUTY JACKS CONTINUED

7950213

7950241

Heavy Duty Direct Weld Drop Leg Jacks Part#

Ref #

Static Load

Lift Travel / Drop Capacity

Retracted Height

Handle Included

7950212

LG4700-30

50K

25K

13.50" / 12"

29.87"

Yes

7950042

LG4700-31

25K

7950041

LG4700-32

25K

6.5K

13.50" / 12"

26.75"

No

25K

13.50" / 12"

26.75"

No

7950213

LG4001-70

7950240

LG4001-71

140K

50K

17"

31.18"

Yes

70K

50K

17"

31.18"

No

7950241

LG4001-72

70K

50K

17"

31.18"

No

Speed Description Set

51000 Landing Gear w/ Drop Section & Cross Pipe

Single LH 51000 Landing Gear with Drop Section Two

RH 51000 Landing Gear with Drop Section

Set

51000 Landing Gear with Cross Pipe

Single LH 51000 Landing Gear Two

RH 51000 Landing Gear

Equalizer Systems

Stop cranking and let Equalizer Systems do the work for you. Equalizer Systems is #1 in the Horse Trailer industry, providing the most advanced lifting systems around. 7950132

EL-PAC1

5K

Single Power Lift System

The El-Pac 1 is capable of lifting 5,000 lbs. of jack weight and is used on living quarter trailers up to 28' on the floor. This system lifts 8 inches per minute under full load. 7950133 7950132

7950133

EL-PAC2

6.5K

Two

Power Lift System

Requires 5 inches of width clearance to mount. Capable of lifting 6,500 lbs. of jack weight, and used on living quarter trailers up to 32' on the floor. This system lifts 8 inches per minute under full load. Hydraulic Jack 7950318

7950318

SJX-1200

Fastest hydraulic jack for nearly any trailer design and environment. 10,000 lbs lift weight. Fully extends in 8 seconds. Large base w/handle ensures solid footing. Pull pin cam for easy operation. All Stillwell jacks feature a 2-year warranty!

SJP-102

Features a heavy duty, customized design. lift to 10,000 lbs in 15 seconds -all w/ease of 2 button remote pendant (included). 3,200 PSI single acting pump. 12V heavy duty start solenoid. 12V heavy duty 4.5” DC electric motor. 3QT reservoir w/120-mesh inlet strainer. Weight: 27lbs.

7950319

7950319

7950325

20K Tandem Hudraulic Jack Set-Single Action Pump Square 25” Ext. 12v power up and power dwn. 7950338 TNDM APPLICATION HOSE ASSY IS REQUIRED (WOULD BE BOX 4 OF 4) WHEN SOLD WITH 7950325. CUSTOMER MAY OPT TO PURCHASE HOSE ASSY LOCALLY. *** 7950325 IS A THREE BOX SHIP ***

7950338

20k Tandem Hydraulic Jack Set HOSE ASSEMBLY CONSIST OF THE FOLLOWING: * (2-EA) 6’ HYDRUALIC HOSES (7950335), * (2-EA) 3/8” L-FITTINGS (7950337) *(1-EA) 3/8” T-FITTING (7950336)

Dropleg Jack & Landing Gear Accessories

7950260

7950168

7950092

WWW.TEXTRAIL.COM

7950091

D-13

Part#

Ref #

5350132

CP42

Description Crosspipe 1"ID x 46"L x SC40

7950260

LG0094

7950092

LG0083-03

Jack Crank 18"L 13.5 Radius

7950168

TJD1200C

Crank Hanger Clip

7950091

TJD1200H

Jack Crank 6” L 13.5 Radius

Crosspipe 1"OD x 68"L

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

7950042

7950041


J AC K S , CO U P L E R S & W I N C H E S

JACKS, COUPLERS & WINCHES

7950261

Part# 7950070 7950163 7950074 7950072 7950071 7950119 7950261 7950018

Ref # 161 162 165 167 169 18006 18007 18520

7950157

7950114

7950105

7950108

7950242

7950239

7950092

7950119

Capacity 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K 0.75K Part# 7950129 7950130 7950021 7950131 7950226 7950102 7950108 7950096 7950090 7950013 7950157 7950097 7950168 5350132 7950260 7950092 7950091 7950244 7950509 7950508 7950510 7950075 7950247 7950248 7950243 7950239 7950513 7950512 7950248 7950242 7950113 7950114 7950016 7950514

7950018

7950070

7950163

7950074

7950071

Rack Posts and Gearboxes Application Description Weld-On Gear Box Bolt-On Gear Box Weld / Bolt Gear Box Weld / Bolt Gear Box T Swivel Bolt-On Gear Box for Rectangular Tongue Rack Post with 6" Steel Wheel Rack Post with 6" Poly Wheel Rack Post with Disc Foot Jack Accessories Ref # Description 500238 5/8" Pin Weld-On Female Pipe Jack Mount 500240 5/8" Pin Weld-On Male Pipe Jack Mount 82500 7/8" Pin Weld-On Male Pipe Jack Mount 500239 9/16" Pin Weld-On Male Pipe Jack Mount TJD-7000-HD Bulldog & Pacific Rim Up to 8K Red Top Wind Jack Knob 500171 Bulldog 190 Black Side Wind Jack Handle 0.85" RAD 500148 Bulldog 190 Black Top Wind Jack Handle 500105 Bulldog Black Side Wind Handle 0.8K - 5K 0.65" RAD 500245 Bulldog Detachable 0.8K Poly Jack Caster 017125 Bulldog Detachable 1K Steel Jack Caster 500178 Bulldog Pin Kit 1/2" for 150-160-170 Series Jacks 500256 Bulldog Side Wind Handle & Gear Kit 0.8K, 1K & 5K TJD1200C Crank Hanger Clip CP42 Crosspipe 1"ID x 46"L x SC40 LG0094 Crosspipe 1"OD x 68"L LG0083-03 Jack Crank 12"L TJD1200H Jack Crank 13-1/2" JF-99 Jack Foot Bolt-On for 2" Jacks JF-100-B Jack Foot with Hardware for 2" Jacks 1.7" Tall JF-100-Z Jack Foot with Hardware for 2" Jacks 1.7" Tall Zinc JF-101 Jack Foot with Hardware for 2" Jacks 8.5" Tall TJD-7000-FT Jack Leg for 7K Jacks MJ-1000B-MBB Marine Jack Mounting Kit PLGPIN-12 Pacific Rim 1/2" Swivel Jack Pin Kit MJ-1000B-WL Pacific Rim Black 6" Poly Wheel with Nut, Bolt & Spacer TJA2000HD Pacific Rim Black Top Wind Jack Handle JC-102 Pacific Rim Detachable 1.2K Poly Jack Caster JC101 Pacific Rim Detachable 1.2K Poly Jack Caster PLGPIN-12 Pacific Rim Pin Kit 1/2" for Swivel Jacks TJPD-HD Pacific Rim Red Top Wind Jack Knob 500231 Pull Pin 5/8" x 3.5" with Chain for Bulldog 170 Series Side Wind Jacks 500232 Pull Pin 5/8" x 4.25" with Chain for Bulldog 190 Series Jacks Pull Pin 9/16" X 3.5" with Chain for Pacific Rim Pipe Mount and Bulldog 150 & 170 Series Top Wind Jacks 500243 JSP-100 Support Plate for 2K & 5K Jacks 2.29" Hole Type L-Bracket L-Bracket A-Frame L-Bracket Up To 3x5 -

WWW.TEXTRAIL.COM

D-14

2010 Copyright by TexTrail, Inc.


J AC K S , CO U P L E R S & W I N C H E S WINCHES

Single Speed Strap / Rope Winches Drum Capacity

Part#

Ref #

Capacity

Gear

Ratchet

9850015 9850017 9850014

T600

0.6K 1.5K 1.8K

Ratio 3.1:1 4.1:1 5.1:1

Style Rope Two-Way 36' x 1/4" Two-Way 30' x 5/16" Two-Way 20' x 7/16"

T1500 T1801

Handle

Description

Included No No No

Length 6" 8" Fulton

Fulton S Series Hand Winch Fulton S Series Hand Winch Fulton S Series Hand Winch

Strap / Rope /

Handle

Description

Strap 15' x 2" 20' x 2" 20' x 2"

Two Speed Strap / Rope / Cable Winches Part#

Ref #

Capacity

Gear

Ratchet

Drum Capacity

Ratio

Style

Rope

Strap

Cable

Cable Included

Length

9850019

T2005 0101

2K

4.1:1 & 9.8:1

Two-Way with Neutral

20' x 7/16"

N/A

N/A

No

10"

9850063

K1550 0301

1.5K

5.1:1

Auto Brake

N/A

N/A

70' x 1/4"

No

11"

9850032

T2605 0101

2.6K

9850020

T3205B

3.2K

9850056

T3205 0101

3.2K

9250015 9850018

WSP12 0100

1.8K 2.6K

WS20 0200

5.1:1 & Two-Way N/A No N/A 12.2:1 with Neutral 24' x 7/16" 5.1:1 & 100' x Two-Way No N/A N/A 7/32" 12.2:1 with Neutral 5.1:1 & 100' x Two-Way No N/A N/A 7/32" 12.2:1 with Neutral 2" x 12' Winch Strap with Hook and Loop Nylon Fulton (Pkg 6-each) 2" x 20' Winch Strap and Hook Nylon Web Fulton

10" 10" 10"

Fulton High Performance Series Hand Winch Fulton High Performance Series Hand Winch with Auto Brake Fulton High Performance Series Hand Winch Fulton High Performance Series Hand Winch with Hand Brake Fulton High Performance Series Hand Winch

Marine U-Bolts

8270007

Part #

Stainless Steel, Galvanized & Yellow Zinc Plated Marine U-Bolts Ref # DIA Length Use with Description

Part #

Double U-Bolt Brackets Ref # Description

9000507

US1201405S

1/2"

4-5/16"

2"

Stainless Steel Square U-Bolt

8270007

10190G

9000508

US1201505S

1/2"

5-5/16"

2"

Stainless Steel Square U-Bolt

8270008

10191G

9000509 9000501

US1201605S US1201405G

1/2" 1/2"

6-5/16" 4-5/16"

2" 2"

Stainless Steel Square U-Bolt Galvanized Square U-Bolt

1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"

5-5/16" 6-5/16" 4-5/16 4-1/2" 5-5/16" 5-5/16" 6-5/16" 3-7/8" 4-5/16"

2" 2" 2" 3" 3" 3" 3" 3" 3"

Galvanized Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Stainless Steel Square U-Bolt Stainless Steel Square U-Bolt Galvanized Square U-Bolt Galvanized Square U-Bolt Yellow Zinc Square U-Bolt Yellow Zinc Square U-Bolt

9000502 9000503 9000504 9000289 9000510 9000505 9000506 9000511 9000500

US1201505G US1201605G US1301405G UB345120SS US1301505S US1301505G US1301605G UB337812SS US1301405Y

WWW.TEXTRAIL.COM

D-15

Galvanized Double U-Bolt Bracket 8-3/4"H x 4" W Galvanized Double U-Bolt Bracket 9-3/4"H x 4" W

Marine Nuts & Washers Part #

Ref #

7030202 7030199 7030203 7030204 7030069 7030062

12CHN188SS 12LW188SS 12CHNG 12LWHDG 12CHNYZ 12LWYZ

Description 1/2" Stainless Steel Hex Nut 1/2" Stainless Steel Lock Washer 1/2" Galvanized Hex Nut 1/2" Galvanized Lock Washer 1/2" Yellow Zinc Hex Nut 1/2" Yellow Zinc Lock Washer

2010 Copyright by TexTrail, Inc.

JACKS, COUPLERS & WINCHES

Strap / Rope


J AC K S , CO U P L E R S & W I N C H E S

JACKS, COUPLERS & WINCHES

ELECTRIC WINCHES 9850113 T-MAX ATV SERIES 3000 3K WINCH 12V, 1.1hp OUTPUT Rated Line Pull: 3,000 lbs Single-Line Motor: Permanent Magnet DC 12V with 1.1hp Output Gear Train: Differential Planetary Gear Ratio: 153:01:00 Drum Size: 1.61” Diameter Wire Rope: 31” Length, 1/4” Galvanized Aircraft Cable Fairlead: 4-Way Roller Fairlead Included Winch Tray: Pre-Welded Bolt Pattern Mounting Tray Included Pulley Block: Included Control: Remote Switch, 11.5" lead Finish: Black w/ Yellow Ends Battery: Recommended 12amp (Includes 6mm Leads) Weight: 29 lbs (12 kgs) Overall Dimensions: (L x W x H) 12.35” x 7” x 4.2” 9850114 T-MAX ATV SERIES 4500 4.5K WINCH 12V, 1.3hp OUTPUT Rated Line Pull: 4,500 lbs Single-Line Motor: Permanent Magnet DC 12V with 1.3hp Output 120 degree clutch w/ EBT brake Gear Train: 3-Stage Planetary Gear Ratio: 148:01:00 Drum Size: 2” Diameter x 4.75” Length Wire Rope: 50' Length, .25" Diameter (6.3 mm) Fairlead: 4-Way Roller Fairlead & Pulley Block Included Winch Tray: Pre-Welded Bolt Pattern Mounting Tray Included Control: Remote Switch, 11.5" lead Finish: Black w/ Yellow Ends Weight: 37 lbs Overall Dimensions: (L x W x H) 14.6” x 4.7” x 5.1” Recommended 650CCA, Includes 25mm Cables 9850119 T-MAX ATV SERIES 9000 11K 12V, 5.5hp OUTPUT Rated Line Pull: 11,000 lbs Single-Line Motor: 5.5hp 12V DV Series Wound Auto In-Drum Brake Gear Train: 3-Stage Planetary Gear Ratio: 265:01:00 Drum Size: 2.5” Diameter x 8.75” Length Wire Rope: 94' Length, 5/16" Galvanized Aircraft Cable Fairlead: 4-Way Roller Fairlead Control: Remote Switch, 11.5" lead Finish: Silver Battery: Recommended 650CCA, Includes 25mm Cables Weight: 84 lbs Overall Dimensions:

(L x W x H) 22” x 6.3” x 8.1”

9850121 T-MAX ATV SERIES 12,500 12.5K WINCH 12V, 5.5hp OUTPUT Rated Line Pull: 12,500 lbs Single-Line Motor: 5.5hp 12V DV Series Wound Gear Train: Differential Planetary Gear Ratio: 172:08:01 Drum Size: 2.5” Diameter x 8.75" Length Wire Rope: 94' Length, 5/16" Galvanized Aircraft Cable Fairlead: 4-Way Roller Fairlead Included Winch Tray: Pre-Welded Bolt Pattern Mounting Tray Included Pulley Block: Included Control: Remote Switch, 11.5" lead Finish: Silver Battery: Recommended 650CCA, Includes 25mm Cables Weight: 103 lbs Overall Dimensions: (L x W x H) 22” x 6.3” x 8.6”

WWW.TEXTRAIL.COM

D-16

2010 Copyright by TexTrail, Inc.


TO W I N G

TOWING

Table Of Contents - Towing Aluminum Ball Mounts Adjustable Clevis Adjustable Tow Bar Adapter Sleeves Adapter for Receiver Tube Back-Up Assist Camera Balls Ball Mounts B&W Gooseneck Hitches B&W Adjustable Receiver / Pintle Hitch B&W RV 5th Wheel B&W Tow & Stow Receiver Hitches Bolt-On Receiver Hitches Brackets (Channel & Adjustable) Bumper Receiver Hitches Cargo Carrier Platforms Combination Pintle Hitch Convert-A-Ball速 Cushioned Ball Mounts Double Ball Mount Drop Hitches Extender for Receiver Tube Fifth Wheel Hitches Folding Gooseneck Hitch Balls Gooseneck Channels Gooseneck Hitch Plates Gooseneck Hitches Heavy Duty Ball Mounts Hitch Balls Holland Mini Fifth Wheel Interchangeable Hitch Balls King Pins Mounting Rails (Folding Ball) Mounting Rails (5th Wheels) Pintle Hooks Pintle Mounts Rapid Hitch Ball Mounts Receiver Accessories Receiver Ball Mounts Receiver Locks Receiver Tubes Receiver Tube Cover RV 5th Wheels RV Towing Hitch Smooth Shank Hitch Balls Specialty Ball Mounts TexTrail Packaged Towing Products Triple Ball Mount Weight Distribution Hitches WWW.TEXTRAIL.COM

E-6 E-6 E-9 E-4 E-4 E-7 E-7 E-4 E-12 E-6 E-12 E-5 E-2 E-6 E-3 E-8 E-7 E-5 E-5 E-4 E-3 E-4 E-10 E-11 E-9 E-9 E-11 E-4 E-7 E-9 E-5 E-9 & 12 E-11 E-10 E-7 E-6 E-6 E-5 thru E-7 E-4 E-7 E-3 & E-8 E-6 E-10 E-3 E-8 E-4 E-13 E-4 E-8 E-1

2010 Copyright by TexTrail, Inc.


TO W I N G RECEIVER HITCHES

Ref # T13301 T14301 T15301 T13332 T15006 T14332 T15208 T14108 T14008 T13008 T15008 T13208 T14208 T13042 T14081 T13270 T13336

Year 07-11 07-11 07-11 99-07 99-07 99-07 01-10 01-07 01-07 01-10 01-07 01-08 01-08 88-00 88-00 06-09 05-08

Class 3 4 5 3 5 4 5 4 4 3 5 3 4 3 4 3 3

Capacity 6-10K 10-12K 12-14K 6-10K 12-14K 10-12K 12-14K 10-12K 10-12K 6-10K 12-14K 6-10K 10-12K 6-10K 6-10K 5-5.5K 3.5K

Part# 7350005 7357163 7356353 7357148 7356995 7356992 7357037 7357040 7356902 7357349 7357142 7357484 7357511 7357076 7357436 7357052 7357406 7356869 7357184 7357016 7356839 7357010 7357199 7357178

Ref # T13072 T13389 T12094 T13364 T13230 T13228 T13280 T13297 T13097 T13590 T13361 T14361 T15061 T13326 T14070 T13310 T14001 T13084 T13414 T13251 T13051 T13245 T13432 T13408

Year 04-09 04-07 96-07 08-11 05-11 05-09 87-04 04-06 98-03 97-04 02-09 02-10 03-11 2002 07-11 67-02 67-02 84-01 06-09 05-09 99-04 08-09 07-09 97-06

Class 3 3 2 3 3 3 3 3 3 3 3 4 5 3 4 3 4 3 3 3 3 3 3 3

Capacity 6-9K 3.5-4K 3.5K 0.8K 5-8K 5-7.5K 5-8K 5-6K 5-8K 5-8K 6-10K 10-12K 12-14K 5-10K 10-12K 6-10K 10-12K 5-6K 5-7.5K 5-5.5K 5-6K 5-7.5K 3.5-4K 4K

Part# 7357313 7357160 7356992 7357343

Ref # T13561 T13385 T13228 T13581

Year 99-09 05-09 05-09 07-09

Class 3 3 3 3

Capacity 3.5-5K 5-6K 5-7.5K 4K

Part# 7357397 7357394 7357004 7357241 7356953 7356968 7356956

Ref # T13842 T13841 T13244 T13514 T13183 T13199 T13185

Year 03-04 00-04 05-09 05-08 00-04 03-09 08-09

Class 3 3 3 3 3 3 3

Capacity 5-6K 5-6K 5-8K 4-6K 4-6K 6-10K 3.5-4K

GM Receiver Hitches Make Notes Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 New Body Style Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty Chevy / GMC Silverado / Sierra 1500 & 2500 Light Duty 6' & 8' BED Chevy / GMC Silverado / Sierra 2500 & 3500 Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 & 3500 8’ Bed Chevy / GMC Silverado / Sierra 2500 Heavy Duty & 3500 ALL Chevy / GMC Silverado / Sierra 2500 Heavy Duty & 3500 ALL Chevy / GMC Trucks Chevy / GMC Trucks 6' Bed & 8' Bed GMC Hummer H3 GM SUV (Buick, Chevy, GMC, Pontiac, Saturn) Chrysler / Dodge Jeep Receiver Hitches Make Notes Chrysler / Dodge Aspen & Durango Chrysler / Dodge Caravan, Grand Caravan & Town&Country (including Stow-N-Go) Chrysler / Dodge / Plymouth Caravan, Voyager & Town&Country (less Stow-N-Go) Chrysler / Dodge / Volkswagon Grand Caravan, Town&Country & Routan (including Stow-N-Go) Dodge Dakota Dodge Dakota Dodge Dakota Dodge Durango Dodge Durango Dodge Full Size Van (except with Factory Step Bumper) Dodge Ram Dodge Ram Dodge Ram Dodge Ram Dodge 1 Ton Truck Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Jeep Cherokee Jeep Commander Jeep Grand Cherokee Jeep Grand Cherokee Jeep Liberty Jeep Wrangler Jeep Wrangler Honda / Mitsubishi Hitches Make Notes Honda Odyssey Honda Ridgeline Mitsubishi Raider Mitsubishi Outlander Nissan Hitches Make Notes Nissan Frontier Long Bed Nissan Frontier Short Bed Nissan Frontier Nissan Xterra Nissan Xterra Nissan Titan Nissan Rogue

WWW.TEXTRAIL.COM

E-2

2010 Copyright by TexTrail, Inc.

TOWING

Part# 7357049 7357463 7357520 7357085 7357493 7357469 7357496 7356758 7357409 7357454 7357516 7356971 7357457 7356821 7357442 7357031 7357091


TO W I N G

TOWING

RECEIVER HITCHES CONTINUED Part# 7357367 7356833 7356917 7357295 7357280 7356779 7350648 7350574 7350300 7357052 7357406 7357481 7357127 7357136 7357424 7357139 7357151 7357133 7356764 7357421 7357490 7357475

Ref # T13650 T13049 T13112 T13550 T13540 T13019 T13085 T13053 T13055 T13310 T14001 T14360 T13352 T13357 T14044 T13360 T13365 T13355 T13014 T14041 T15004 T14355

Year 05-11 97-03 06-08 02-05 91-03 83-09 94-04 75-07 00-09 67-02 67-02 06-08 04-05 04-05 97-03 06-08 06-08 97-11 99-09 1199-09 99-09 99-11

Part# 7357208 7357232 7357025 7357070 7356761 7356965 7356950

Ref # T13445 T13509 T13256 T13323 T13013 T13198 T13180

Year 03-09 06-08 04-09 05-10 95-04 07-09 00-06

Part# 7357403 7357400 7356755 7357052 7357406

Ref # T13950 T13895 T12923 T13310 T14001

Year 62-07 97-08 62-03 67-02 67-02

Part# 7357373 7357379

Ref # T13701 T13702

Class 3 3

Part# 7350156 7350167 7350168

Ref # SBH2 E-1 E-2

GTW 3.5K 5K 5K

Ford / Lincoln / Mercury Receiver Hitches Make Notes Ford / Mercury / Mazda Escape, Tribute & Mariner Ford / Lincoln Expedition & Navigator Ford Explorer Ford / Mercury Explorer & Mountaineer Ford / Mercury / Mazda Explorer, Mountaineer & Navajo Ford Ranger Ford Winstar Ford Full Size Van All (except with step bumper) Ford Full Size Van All (except with step bumper) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Dodge / Ford Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) Ford / Lincoln F150 & Mark LT Trucks Ford F150 All Ford F150 with Damper Ford F150 & F250 Light Duty Ford / Lincoln F150 & Mark LT Trucks (Tube) Ford / Lincoln F150 & Mark LT Trucks (Round) Ford F150, F250 & F350 Ford F250 & F350 Super Duty Ford F250 & F350 Super Duty Ford F250 & F350 Super Duty Ford F150, F250 & F350 Toyota Hitches Class Capacity Make Notes 3 5-5.5K Toyota 4Runner 3 3.5-4K Toyota Rav4 3 5K Toyota Sienna 3 5-5.5K Toyota Tacoma 3 5-6K Toyota Tacoma 3 6-10K Toyota Tundra 3 6-10K Toyota Tundra Multi-Fit Hitches Class Capacity Notes 3 5K Ford, Chevy, GMC, Toyota, Dodge & Plymouth 2" Multi-fit 3 6K Ford, Chevy & GMC Trucks 2" Multi-fit 2 3.5K Ford, Chevy, GMC, Toyota, Dodge, Chrysler, Nissan, Jeep, Plymouth, Oldsmobile & Pontiac 1-1/4" Multi-fit 3 6-10K Dodge / Ford - Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) 4 10-12K Dodge / Ford - Dodge Full Size Trucks (less Ram 1500); Ford Bronco & F-Series (less Crew) RV Towing Hitch Capacity Notes 5-6K 2" Drop Adjustable Up To 51" Frame RV Receiver Hitch 5-6K Adjustable Up To 51" Frame RV Receiver Hitch Bumper Receiver Hitches TW Description 350 lb 2" Square Step Bumper Hitch Black Powder Coated 500 lb 4" Drop Step Bumper Hitch 3/8" Steel Plate 8-1/2" Bolt Pattern Width on Center 500 lb 6" Drop Step Bumper Hitch 3/8" Steel Plate 8-1/2" Bolt Pattern Width on Center Class 3 3 3 3 3 3 3 3 3 3 4 5 3 3 4 3 3 3 3 4 5 4

Capacity 3.5K 6-10K 5-8K 5-6K 4-6K 4-6K 4-6K 5-7.5K 5-7.5K 6-10K 10-12K 10-12K 6-10K 6-10K 10-12K 6-10K 6-10K 6-10K 6-10K 10-12K 12-14K 6-10K

7350156

7350167

7350319

Part# 7350319 7350320 7350321 7350316 7350317 7350318 7350111

Ref # E-9 E-88 E-89 E-11 E-12 E-13 E-14

GTW 2" 2" 2" 2" 2" 2" 2"

WWW.TEXTRAIL.COM

Long 6" 8" 10" 12" 18" 24" 36"

Receiver Tubes Description Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube Ball Mount Receiver Tube

E-3

2010 Copyright by TexTrail, Inc.


TO W I N G BALL MOUNTS Ball Mounts Part# 7350029 7350080 7350038 7350036 7350037

Ref # D-3 D-4 D-5 D-7 D-9

Finish Black Powder Black Powder Black Powder Black Powder Black Powder

GTW / TW 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs 5K / 500 lbs

Drop 2" 2" 4" 6" 8"

Rise 3/4" 3/4" 2" 4" 6"

Length 8-1/4" 10-1/4" 8-1/4" 8-1/4" 8-1/4"

Hole Size 1" 1" 1" 1" 1"

Description Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube Ball Mount for 2" x 2" Receiver Tube

Dual Length Ball Mounts Part#

Ref #

Finish

GTW / TW

Drop

Rise

Length

7350512

D-24

Black Powder

6K / 600 lbs

6"

4"

8-1/4" & 10-1/4"

Hole Size 1"

Ball Mount for 2" x 2" Receiver Tube

Ball 2" 2" 2"

Description Ball Mount Assembly for 2" x 2" Receiver Tube Ball Mount Assembly for 2" x 2" Receiver Tube Ball Mount Assembly for 2" x 2" Receiver Tube

Description

7350512

Ball Mount Assemblies (with Pin & Clip) Ref # D-534 D-4554 D-554

Finish Black Powder Chrome Black Powder

GTW / TW 6K / 600 lbs 6K / 600 lbs 6K / 600 lbs

Drop 2" 2" 4"

Rise 3/4" 3/4" 2"

Length 8-1/4" 8-1/4" 8-1/4"

Hole Size 1" 1" 1"

7350583

7350658

One Piece Forged Ball Mounts Part# 7350024 7350025 7350026

Ref # D-122 D-124 D-126

Finish Black Powder Black Powder Black Powder

GTW / TW 12K / 1.2K 12K / 1.2K 12K / 1.2K

Drop 2" 4" 6"

Rise 3/4" 2" 4"

Length 6” 6” 6”

Hole Size 1-1/4" 1-1/4" 1-1/4"

Description Heavy Duty Forged Ball Mount for 2" x 2" Receiver Tube Heavy Duty Forged Ball Mount for 2" x 2" Receiver Tube Heavy Duty Forged Ball Mount for 2" x 2" Receiver Tube

7350024

Heavy Duty Ball Mounts

2-1/2” Receiver Tube Ball Mounts Part# 7350689 7350028 7350690

Ref # D-2525 D-2526 D-2527

Finish Black Powder Black Powder Black Powder

Part#

Ref #

Finish

7350604

D-2505

Black Powder

Part# 7350279 7350188

Ref # D-150 D-160

Finish Black Powder Black Powder

GTW / TW 10K / 1K 10K / 1K 12K 1.2K

Drop 3" 5" 8"

Rise 1-1/2" 3-1/2" 6-1/4"

Length 9-3/4" 10" 10-1/2"

Hole Size 1-1/4" 1-1/4" 1-1/4"

Description Heavy Duty Ball Mount for 2-1/2" x 2-1/2" Receiver Tube Heavy Duty Ball Mount for 2-1/2" x 2-1/2" Receiver Tube Heavy Duty Ball Mount for 2-1/2" x 2-1/2" Receiver Tube

Adapter Sleeve Description

7350604

Converts 2-1/2" receiver tube to fit a standard 2" ball mount

Double & Triple Ball Mounts GTW / TW 10K / 1K 10K / 1K

Length 7" & 8-1/2" 8-1/2"

Ball Size 1-7/8", 2" & 2-5/16" 2" & 2-5/16"

7350279

Description Triple Ball Mount for 2" x 2" Receiver Tube Double Ball Mount for 2" x 2" Receiver Tube

7350188

Receiver Tube Adapters & Extenders Part#

Ref #

Finish

Adapts From

7350516 7350517 7350518 7350519 7350520 7350521

D-170 D-180 D-185 D-190 D-195 D-205

Black Powder Black Powder Black Powder Black Powder Black Powder Black Powder

2" 2" 1-1/4" 1-1/4" 2" 2"

Adapts To 1-1/4” 1-1/4” 2” 2” 2” 2”

WWW.TEXTRAIL.COM

Extends 4” 15” 6-1/4” 10” 14” 18”

Description Receiver Adapter Receiver Adapter Receiver Adapter Receiver Adapter Receiver Extender Receiver Extender

E-4

7350518 7350520

7350516

2010 Copyright by TexTrail, Inc.

TOWING

Part# 7350583 7350658 7350584


TO W I N G

TOWING ACCESSORIES

6300088

6300018

6300023

6300017 6300130

7350021

6300099

Ref # 900B 901B 102B 105B 300B 400B 600B 004B 005B

Finish Chrome Chrome Chrome Chrome Chrome Chrome Chrome Plastic Black

Capacity 10K 10K 10K 10K 2K 5K 10K -

Part# 7350021 7350023

Ref # AMSC2 AMSC4

Finish Black Black

Capacity 10K 10K

Part# 7350209 7350315 7350062 7350264 8200354 7350314

Ref# F-4 F-5 F-6 211HP

Finish Zinc Zinc Zinc Zinc Chrome Zinc

Part# 7350153 9990036 7350254 7350253 7350280 7350255 7350256 7350388 7350249 7350251 7350379 7350374

2866DAT

F-500 Ref # 10033B 10033BB 10047B 10047BB 10033C 10037B 10037BB 10048B 10048BB 10040B 10049B 10050B

Model 6 6 6 6 6 8 8 8 8 10 10 12

Size 1/2" 5/8" 5/32" Retaining Clip 2-5/8" Long for 1/2" - 5/8" Hitch Pins 1/8" 1/2 - 5/8" Receiver Lock Bent Pin Class III-IV 3-5/8”L 1/2 or 5/8” Chrome 105° Bent Receiver Pin with Retaining Clip for 2-1/2" Receiver Tubes 5/8" 10K Multi-Ball Adjustable Tow & Stow Receiver Hitches Description B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Chrome B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Browning Logo B&W Magnum Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls B&W Adjustable Dual Ball Mount with 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls B&W Adjustable Tri-Ball Mount with 1-7/8", 2" & 2-5/16" Balls Model

A

B

C

Drop

Rise

Total Vertical Adjustment

3"

3-1/2"

6-1/2"

5"

5-1/2"

10-1/2"

7"

7-1/2"

14-1/2"

9"

9-1/2"

18-1/2"

6 8 10 12

7350254

WWW.TEXTRAIL.COM

7350253

E-5

Adjust to multiple heights, choose ball configuration, & stow away after use.

7350280

2010 Copyright by TexTrail, Inc.

TOWING

Part# 6300099 6300098 6300130 6300127 6300017 6300023 6300018 6300088 6300132

6300132

CONVERT-A-BALL Shank Dia Length Description 1" 2-1/4" Convert-A-Ball® Set with interchangeable 1-7/8", 2" & 2-5/16" balls. 1" 2-1/4" Convert-A-Ball® Set with interchangeable 1-7/8" & 2" balls. 1" 2-1/4" Replacement Convert-A-Ball® Shank 1" 3" Replacement Convert-A-Ball® X-Long Shank Replacement 1-7/8" Convert-A-Ball® Replacement 2" Convert-A-Ball® Replacement 2-5/16" Convert-A-Ball® Convert-A-Ball® Storage Case for 3-balls Convert-A-Ball® Shank Cover Cushioned Ball Mounts Hole Drop Description 1" 2" Convert-A-Ball® Cushioned Ball Mount 1" 4" Convert-A-Ball® Cushioned Ball Mount Hitch Pins Description 105° Bent Receiver Pin with Retaining Clip 105° Bent Receiver Pin with Retaining Clip Retaining Clip 3" Long for 1/2" - 5/8" Hitch Pins 7350314


TO W I N G TOWING ACCESSORIES CONTINUED Part# 7350659 7350660

TOWING

7350268 7350267 Part# 8200170 8200221 7350266 7350377 7350375 7350376 7350277 7350446

10K Adjustable Tow & Stow Receiver Hitch / Pintle Hitch Ref # Description TS10055 B&W Adjustable Pintle Hitch with 2" Ball B&W Adjustable Pintle Hitch with 2-5/16" TS10056 Ball 10051 2" Chrome Pintle Ball 10052 2-5/16" Chrome Pintle Ball Receiver Accessories Ref # Description 50796 5/8" Chrome Receiver Deadbolt Lock T3 5/8" Chrome Receiver Deadbolt Lock TS35010 5/8" x 4-1/2" Stainless Steel Hitch Pin 35014 BW Hitch Plate Cover 10" Chrome 7350266 7350375 7350377 35012 BW Hitch Plate Cover 6" Chrome 35013 BW Hitch Plate Cover 8" Chrome 50943 BW Receiver Hitch Silencer Pad F-10 Tube Cover Formed Steel Chrome Finish 8550036

Part#

Ref #

8550020

Eye

Finish

8550036 E-63 8550037 E-64 8550027 16137 8850001 E-66 8550050 CL20XL8 8550052 9095 8550053 9095XL 8550013 1807800 8550051 0897900

3" 3" 3" 3" 1" 3/4" 3/4" 1" 3/4"

Oily Oily Oily Oily Oily Oily Oily Oily Oily

Part# Ref # 6750131 PS-AC01F 6750132 PS-AC02F E-23 8550020 E-24 8550030 E-241 8550021 Part# Ref # 7030001 B9020 8550026 E-230

Holes 4 6 4 4 7 Size 5/8"-11 1/2"-13

Length 7-1/2" 11-1/2" 7" 7" 13" Length 4/12"

Part# 7350622 7350623 7350624 7350625 7350629

8550027

7350277

8200170

8550050

Bracket & Description Bolts* 12K Yes Adjustable Pintle Eye with 4-hole Brkt 12K Yes Adjustable Pintle Eye with 6-hole Brkt 14K No Adjustable Pintle Ring / Drawbar 20K No Adjustable Pintle Ring / Drawbar 20K Yes Adjustable Clevis with 6-hole Brkt 12K Yes Adjustable Clevis with 4-hole Brkt 12K Yes Adjustable Clevis with 6-hole Brkt 20K No Adjustable Clevis 12K No Adjustable Clevis * Included with Part Number Capacity Shank Type Description 24K Weld-On 3-Position Channel Bracket for Adjustable Couplers 24K Weld-On 5-Position Channel Bracket for Adjustable Couplers 10K 8-1/2" Bolt-On 3-Position Adjustable Pintle Mount 20K 10-1/2" Bolt-On 3-Position Adjustable Pintle Mount 30K 12-1/2" Bolt-On 5-Position Adjustable Pintle Mount Grade Description 8 Hardware Kit for Adjustable Mounts 2ea Nuts & Bolts 8 Hardware Kit for Adjustable Mounts 4ea Nuts, Washers & Bolts 10K Aluminum Rapid Hitches Part# Ref # Rise / Drop Description 7350634 DT-ALBM6400 5-1/2" 2" & 2-5/16" Dual Ball 2" Receiver Ball Mount 7350635 DT-LBM6600 4" to 10" 2" & 2-5/16" Dual Ball 2" Receiver Ball Mount 7350636 3424 Replacement 2" & 2-5/16" Balls 14K Aluminum Ball Mounts Ref # Rise / Drop Hole Description DT-BM4200 2” 1” 2” Receiver Aluminum Stinger 14K DT-BM4400 4” 1” 2” Receiver Aluminum Stinger 14K DT-BM4600 6” 1” 2” Receiver Aluminum Stinger 14K DT-BM5200 8” 1” 2” Receiver Aluminum Stinger 14K DT-LBM8400 10” 1” 2” Receiver Aluminum Stinger

WWW.TEXTRAIL.COM

Capacity

E-6

2010 Copyright by TexTrail, Inc.


TO W I N G Ref # A-15 A-16 A-2 A-18 A-19 A-4 A-38 A-33 A-34 A-20 A-90 A-5 A-7 A-39 A-21 A-6 A-35 A-36 A-43 A-41 94006 A-91 A-92

Part# 6300031-01 6300079-01 6300082-01

Ref # TTB2517 TTB2516 TTB2016

7350784 7350783

SG-22 UTK-32

Part# 7350109

Ref # 4843

Bulk Trailer Balls Rise Finish Capacity Description Chrome 2K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 2K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 3.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 12K Coarse Thread Heat Treated Nickel Chrome Trailer Ball 1" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball 2" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 10K Coarse Thread Heat Treated Nickel Chrome Trailer Ball Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 12K Coarse Thread Heat Treated Nickel Chrome Trailer Ball Chrome Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 1" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 1" Raw 25K Fine Thread Raw Finish Trailer Ball Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball 2” Raw 30K Raw Finish Trailer Ball Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball Raw 30K Coarse Thread Heat Treated Raw Finish Trailer Ball Packaged Trailer Balls Ball Shank Length Rise Finish Capacity Description 2-5/16" 1-1/4" 2-5/8" Chrome 10K Fine Thread Nickel Chrome Plated Trailer Ball 2-5/16" 1" 2-1/8" Chrome 7.5K Fine Thread Nickel Chrome Plated Trailer Ball 2" 1" 2-1/8" Chrome 6K Fine Thread Nickel Chrome Plated Trailer Ball Trailer Ball Accessories Description: Ball Mount Ball Protector Cover Universal for 1-7/8”-2-7/8” (See picture below) Description: Receiver Combination Lock. Weatherproof, set your own combination. Back-Up / Hitch Assist Camera Power: Monitor Camera Transmits Description Auxiliary/ Lighter Plug 4-Way Flat 50+ Feet Wireless 3-1/2" Color Monitor with Magnetic Base & Camera Ball 1-7/8" 1-7/8" 1-7/8" 2" 2" 2" 2" 2" 2" 2" 2" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16" 2-5/16” 2-5/16" 3"

Shank 3/4" 3/4" 1" 3/4" 3/4" 1" 1" 1" 1" 1" 1-1/4" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/4" 1-1/2” 2" 2"

Length 2-1/8" 3" 2-1/8" 2-1/8" 3" 2-1/8" 2-1/4" 2-1/8" 2-1/8" 3" 2-5/8" 2-1/8" 2-1/4" 2-1/4" 3" 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-5/8" 2-3/4” 3-1/2" 3-1/2"

Wireless! Part# 8550015 8550044 8550031 8550042 8550024 8550029 8550011 6300025 6300022

Ref # E-21 E-210 S15T E-19 E-20 BH82000 BH2516 E-19R E-20R

Eye / Ball 2" - 3" 2" - 3" 2-3/8" - 3"

2" 2-5/16" 2” 2-5/16” 2" 2-5/16"

Bolts 4 4 2 4 4 4 4 -

Pintle Hooks & Combination Pintle Hitches Capacity Description Rigid Forged Steel Pintle Hook with Linch Style Safety Pin with Mounting Hardware 10K Rigid Forged Steel Pintle Hook with Linch Style Safety Pin with Mounting Hardware 30K Swivel Forged Steel Pintle Hook with Spring Cushion 30K 16K Combination Pintle Hook / 2" Chrome Ball Black Powder Coated 10K Rated Ball Combination Pintle Hook / 2-5/16" Chrome Ball Black Powder Coated 12K Rated Ball 16K Combination Pintle Hook 2” Ball 2-3 Eye 4 Bolt Flng Mount 16K Combination Pintle Hook 2-5/16” Ball 2.5-3 Eye 4 Bolt Flng Mount 16K 10K Pintle Ball Combination Replacement Ball 12K Pintle Ball Combination Replacement Ball

7350784

7350783

8550011

8550029

8550031 8550042

WWW.TEXTRAIL.COM

E-7

8550015

2010 Copyright by TexTrail, Inc.

TOWING

Part# 6300045 6300047 6300026 6300068 6300070 6300082 6300015 6300078 6300067 6300076 6300086 6300079 6300191 7350396 6300081 6300031 6300085 6300074 6300193 6300063 6300065 6300061 6300062


TO W I N G

TOWING

Part# 6300145 6300060 7350115 6300106 6300110

Ref # 3434 TTBK2516 A-93 94011 94012

Part# 7358108 7358107 7350319 7350316 7350317 7350318 7350111 7350213

Ref # E-911 E-912 E-9 E-11 E-12 E-13 E-14 E-2510

Part# 7350718

Ref # E-17

Size 4" 2-5/16"

Size 1-1/4" x 1-1/4" 1-1/4" x 1-1/4" 2" x 2" 2" x 2" 2" x 2" 2" x 2" 2" x 2" 2-1/2" x 2-1/2"

Capacity 5K

Specialty Balls Description Smooth Shank Eye Ball 30K Ball Kit with Collar consisting of 6300106 & 6300110 5/8" x 1-1/4" Sway Control Replacement Hitch Ball 30K 2-3/16" Drop-In Machined Ball 30K 2-3/16" Ball Collar Hitchin Rods Part#

Ref #

7350274

HR01C

Description Magnetic Hitchin Rod Set 48"

Receiver Tubing - Raw Finish Description 6" Receiver Tube 12" Receiver Tube 6" Receiver Tube 12" Receiver Tube 18" Receiver Tube with 1/2" Reinforcing Collar 24" Receiver Tube with 1/2" Reinforcing Collar 36" Receiver Tube with 1/2" Reinforcing Collar 10" Receiver Tube

7350318

7350319

7350718

Weld-On Hitch Box Description 2"ID Square Raw Finish Weld-On Hitch Box

7350683

7350684

60" x 20" Bolt-Together Cargo Carriers for 2" Receiver Hitches Part# Ref # Capacity Depth Finish Description Powder Coated Carrier with Fixed Shank 7350683 18130 0.5K 2-3/4" Powder Coated Carrier with Folding Shank 7350684 18131 0.5K 6" Note: Both Carriers include a 5/8" Hitch Pin Note: Carriers may interfere with rear-mounted spare tires. Part# 6300108 6300107

Ref # F-1 F-2

Part# 7350717 7350449 7350387 7350389 7350158 7350115

Ref # 17000 17002 17301 17302 17200 A-93

Reduce From 1" 1-1/4" Max TW 0.6K 1K 0.8K 1K -

Max GTW 10K 10K 10K 10K -

7350449

Hitch Ball Reducers Reduce To Description 3/4" Hitch Ball Reducer Bushing 1" Hitch Ball Reducer Bushing Weight Distribution Hitches Description Round Bar Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Round Bar Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Trunnion Style Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar Trunnion Style Bolt-Together Weight Distribution Kit with Shank Included 12" Hitch Bar

Sway Control Kit to reduce lateral movements of trailer caused by wind 5/8" x 1-1/4" Sway Control Replacement Hitch Ball 7350158 - Sway Control Kit

7350387

7350115

WWW.TEXTRAIL.COM

E-8

2010 Copyright by TexTrail, Inc.


TO W I N G 5TH WHEEL TO GOOSENECK ADAPTER

6750137

7150033

7350486

7150057

Gooseneck King Pin Adapters Part#

Ref #

Size

Type

7350486 7150033 6750137 7150057

GN5 15085 15086 15087

4" 4" 4" 4"

Square Round Square Round

Part#

Ref #

I.D.

Type

6750206

4200

4"

Round

Part# 7150016 7150018

Ref # KP20038 KP20050

Size 2" 2"

Type Weld-On Weld-On

With Skid Plate Description

Yes Yes Yes Yes

Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter-No Holes Gooseneck King Pin Adapter w/ 3/4” pin Gooseneck King Pin Adapter w/ 3/4” pin Gooseneck Extender Description

24K

10" Gooseneck Extender

TOWING

Capacity

Gooseneck King Pins Description King Pin with 3/8" Bolster Plate King Pin with 1/2" Bolster Plate Fifth Wheel

Part# Ref # Capacity King Pin Description 7150005 FW0001 32K 2" 12" Diameter Holland Mini-Fifth Wheel Invert On Trailer for a single pivot Fifth Wheel with Safety Lock Handle. 8K Max Vertical Load Capacity. Accepts 2" SAE King Pins. 7150005

Part# 7350434 7350720 7350315

Ref # T-745 J-74511 F-5

Capacity 5K 5K -

Adjustable Tow Bar Description Adjustable Tow Bar. Adjust from 26" to 41" wide. 2" Coupler and Universal Bumper Brackets 2-each 1/4" X 60" Coated Safety Chain Assemblies with Safety Latch Hooks 5/8" x 3" Zinc Pin and Clip 7350434

7350720

7350315

Gooseneck Hitch Plates & Fixed Ball Hitch Part# 7350370 7350719 6300117 6300119 6300189 6300063 7350671 6300200

Ref # 16055 16085 C-54 C-53 C-113 A-41 C-10 C-55

Capacity 25K 25K 25K 25K 30K 30K 30K

Description Gooseneck Bent Plate 2-5/16" Ball. Pin & Clip Included. 4-Point fully mountable/demountable function. Carbide Finish* Gooseneck Spyder 2-5/16” Ball. Pin & Clip Included. 4-Point fully mountable/demountable function. Carbide Finish* Gooseneck Bent Hitch Plate 2-1/2" Tall X 18-1/4" x 48" x 1/4" Thick Carbide Finish. Safety Chain and Ball sold separately. Gooseneck Bent Hitch Plate 2-1/2" Tall X 18-1/4" x 48" x 1/4" Thick Raw Finish. Safety Chain and Ball sold separately. Safety Chain U-Bolt Kit 2-5/16" Coarse Thread Heat Treated Raw Finish Trailer Ball 1-1/4" Dia Shank x 2-5/8" Long Gooseneck Fixed Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately. Gooseneck Flat Plate 2-5/16" Chrome Ball. Two 1/2" Welded Forged D-Rings. 13" x 46" Carbide Finish Flat Plate.

* Fits Standard Fifth Wheel Rails. 6300200

6300117

7350671

7350719

7350370

WWW.TEXTRAIL.COM

E-9

2010 Copyright by TexTrail, Inc.


TO W I N G Fifth Wheel Hitches Part#

Ref #

Capacity

Height

7358100

16115

16K

13-1/4"-17"

7358103

16516

16K

14"-17"

7358104

16616

16K

14"-17"

Description E5 Auto-Locking Dual Pivot Head Fifth Wheel Hitch E5 Fifth Wheel with Roller E5 Fifth Wheel with Roller & Base Rails

7358100

Color Indicator locations

7358101

16125

20K

13"-17"

7358109

16526

20K

17-1/2"-21-1/2"

Q5 Fifth Wheel with Roller

7358102

16626

20K

17-1/2"-21-1/2"

Q5 Fifth Wheel with Roller & Base Rails

7358105

16500

20K

-

R5 Self-Locking Fifth Wheel Roller 12" Travel

7358106

16200

-

-

Universal Fifth Wheel Base Rail Kit*

7350732

16204

-

-

Carbide Universal Base Rails Only

Q5 Locking Jaw System - Self Aligning Spherical Axial Bearing Fifth Wheel Hitch with 3 Point Indicator

7358100

* Includes rails, brackets, and hardware. Custom vehicle brackets also available.

TOWING

Custom Fifth Wheel Bracket Kits* Custom Fifth Wheel Brackets cut install time by 50% Reduces or eliminates the need for drilling

7358105

Eliminates need for universal brackets and hardware To be used in combination with 16204 Carbide Universal Base Rails

Make

Model

Style

Year

Part#

Ref #

Notes

Chevy / GMC

1500 / 2500 LD Silverado / Sierra

New Body Style Only

2007-2009

7350710

16412

No Drill

Classic Body Style Only

1999-2007

7350723

16418

Drill

2500HD / 3500 Silverado / Sierra

New & Classic Body Style

2001-2009

7350723

16418

Drill

Ram 1500

Including Mega & Crew Cabs

2009

7350735

16422

Drill

Except Mega & Crew Cabs

2009

7350736

16421

Drill

6' & 8' Beds, Including Mega Cab

2006-2008

7350737

16420

No Drill

Dodge

Ford

All

2002-2005

7350725

16419

No Drill

Ram 2500 & 3500

6' & 8' Beds, Including Mega Cab

2003-2009

7350737

16420

No Drill

F-150 & F-250 LD

6' 5" & 8' Beds Only

2004-2010

7350726

16441

No Drill

All

1997-2003

7350727

16437

No Drill

F-150 Heritage

Heritage Edition Only

2004

7350727

16437

No Drill

F-250 & F350 Super Duty

All

2005-2010

7350728

16447

Drill

1999-2004

7350729

16443

Drill

F-450 Super Duty

All, Except Cab & Chassis

2008-2010

7350728

16447

Drill

Nissan

Titan

All

2004-2009

7350738

16470

Drill

Toyota

Tundra

6' 5" Bed Only. Will not fit Crew Max

2007-2010

7350730

16468

Drill

Standard Cab, Long Box Only

2000-2006

7350731

16465

No Drill

7350732

7358106

Custom Fifth Wheel Bracket Kit

16420

16421

7350726

* 16204 Base Rail Required for Installation. X-5 Fifth Wheel Adapter Plate Part#

Ref #

Capacity

Finish

7350721

16310

20K

Carbide

Description Adapts Square Turnover Ball goosenecks to 5th wheel *

* Fits Standard Fifth Wheel Rails.

7350721

Fifth Wheel / Gooseneck Hitch Adapter Harness Part#

Ref #

Makes

Description

7000003

56070

Chevy / GMC / Ford

7' Hitch Adapter Harness

7000004

56071

Dodge

7' Hitch Adapter Harness

7150019

Fifth Wheel Lube Plate Part#

Ref #

Description

7150019

16721

10" 5th Wheel Lube Plate for reduced wear and tear when towing

7000003

7000004

WWW.TEXTRAIL.COM

E-10

2010 Copyright by TexTrail, Inc.


TO W I N G GOOSENECK HITCHES

Folding Ball Gooseneck Hitch Part#

Ref #

Capacity

6300138

C-52

30K

Description Gooseneck Folding Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately.

7350671

6300200 TOWING

Fixed Ball Gooseneck Hitch Part#

Ref #

Capacity

Description

7350671

C-10

30K

Gooseneck Fixed Ball Hitch 2-5/16" Ball. 12" x 12" Carbide Finish Flat Plate. Safety Chain sold separately.

6300200

C-55

30K

Gooseneck Flat Plate 2-5/16" Chrome Ball. Two 1/2" Welded Forged D-Rings. 13" x 46" Carbide Finish Flat Plate. 30K Folding / Fixed Ball Gooseneck Hitch Installation Kits* Universal Gooseneck Hitch Installation Kit

Part#

Ref #

Capacity

6300160

C-502

30K

Description 6300160

Universal Rail Kit. Raw Finish. Drill. 30K Custom Gooseneck Hitch Installation Kits Laser cut for precise fit Grade 5 mounting hardware Easy to follow installation instructions

Make

Model

Style

Year

Part#

Ref #

Notes

Chevy / GMC

1500

New Body Style - All Beds

2007-2009

6300142

C-331

Drill

1500/2500LD

Classic Body Style - All Beds

1999-2007

6300156

C-341

No Drill

2500HD /3500

New & Classic Body Styles

2001-2009

6300156

C-341

No Drill

Ram 1500

All

1994-2001

6300157

C-509

Drill

2002

6300144

C-319

No Drill

1994-2002

6300157

C-509

Drill

2003-2008

6300143

C-520

Drill

2004-2008

6300158

C-321

No Drill

1997-2003

6300141

C-506

Drill

Dodge

Ram 2500 & 3500 Ford

All Beds, Including Mega Cab

F-150

All

6300140

F-150

Heritage Edition Only

2004

6300141

C-506

Drill

F-250 & F-350

All Super Duty

1999-2009

6300140

C-322

No Drill

F-450

All Super Duty Except Cab & Chassis

2008-2010

6300140

C-322

Drill

* Universal and Custom Gooseneck Hitch Installation Kits are for use with Fixed and Folding Ball Gooseneck Hitches 7350671, 6300200 & 6300160. Gooseneck Accessories Part#

Ref #

Description

6300189

C-113

Safety Chain U-Bolt Kit

6300203

C-150

Folding Ball Steel Cutting Template

7350676

1900-2-1600

6300189

6300203

Safety Chin U-Bolt Kit (for B&W turn-over-ball) see page E-12

WWW.TEXTRAIL.COM

E-11

2010 Copyright by TexTrail, Inc.


TO W I N G GOOSENECK HITCHES CONTINUED

7350667

Make Chevy/ GMC

TOWING

Ford

Dodge

Nissan Toyota

Part# 7350902 7350576 7350901 7350899 7350564 7350595 6750206 Part# 7350721

Turnover Ball™ Gooseneck Hitch Style Year Part# Ref # New Body Style Short Bed Only 2007-2011 7350666 1057 New Body Style Long Bed Only 2007-2011 7350565 1007 Classic Body Style Light Duty 2001-2010 7350639 1059 3/4 Ton New Body Style Heavy Duty 2001-2010 7350667 1067 Classic Body Style Light Duty 1999-2007 7350639 1059 1 Ton New Body Style 2007-2009 7350667 1067 Classic Body Style 2001-2007 7350560 1062 1/2 Ton All 2004-2011 7350577 1104 All 1997-2003 7350641 1197 Heritage 2004 7350641 1197 3/4 Ton Light Duty 1997-2003 7350641 1197 Super Duty 1999-2010 7350672 1108 1 Ton Super Duty 1999-2010 7350672 1108 F-450 with Factory Installed Beds 2008-2010 7350672 1108 1/2 Ton All 2009-2011 7351309 1309 All except Mega-Cab 2002-2008 7350561 1316 Mega-Cab Short Bed 2003-2011 7350617 1306 All 1994-2001 7350594 1394 3/4 Ton All 2003-2009 7350617 1306 All 1994-2001 7350594 1394 1 Ton All 2003-2009 7350617 1306 All 1994-2002 7350594 1394 All 2004-2011 7350891 1208 2007-2011 7350893 1257 All 2000-2006 7350892 1251 * The ball cannot be stored in the receiver of this hitch. B&W Accessories will NOT work with this model. Turnover Ball™ Gooseneck Hitch Accessories Ref # Description 6750206 1900 Latch Pin Pull Handle 2000 Turnover Ball™ 30K Machined 2-5/16" 7350595 2025 Turnover Ball™ 3" Ball 2050 Turnover Ball™ 20k High-Rise 2-5/16" 7350576 7350899 4000 Turnover Ball™ 2" King Pin 4085 Turnover Ball™ 4" Gooseneck Extender 2-5/16" 4200 Turnover Ball™ 10" Gooseneck Extender 24K 4"ID X-5 Fifth Wheel Adapter Plate Ref # Capacity Finish Description 16310 20K Carbide Adapts Square Turnover Ball goosenecks to 5th wheel * * Fits Standard Fifth Wheel Rails. Model 1/2 Ton

Notes

7350564

7350721 Part# 7350563 7350897 7350894

Ref # 3000 3050 1500

Capacity 18K 18K

Companion Fifth Wheel RV Hitch Description Turnover Ball™ Companion Fifth Wheel RV Hitch Turnover Ball™ Companion Fifth Wheel RV Hitch for Flat Bed Trucks Installation Kit for Flat Bed Companion Fifth Wheel Hitch (welding required)

7350563

WWW.TEXTRAIL.COM

E-12

2010 Copyright by TexTrail, Inc.


TO W I N G TEXTRAIL PACKAGED PRODUCTS

Packaged Trailer Balls Length Rise Finish Capacity Description

Part#

Ref #

Ball

Shank

6300031-01

TTB2517

2-5/16"

1-1/4"

2-5/8"

-

Chrome

10K

Fine Thread Nickel Chrome Plated Trailer Ball

6300079-01

TTB2516

2-5/16"

1"

2-1/8"

-

Chrome

7.5K

Fine Thread Nickel Chrome Plated Trailer Ball

6300082-01

TTB2016

2"

1"

2-1/8"

-

Chrome

6K

Fine Thread Nickel Chrome Plated Trailer Ball

Ref #

Finish

Size

7350209-01

TTRP120

Zinc

1/2"

7350315-01

TTRP583

Zinc

5/8"

6300031-01

7350315-01

6300082-01

TOWING

Part#

Packaged Receiver Pins Description 105째 Bent Receiver Pin with Retaining Clip 105째 Bent Receiver Pin with Retaining Clip

7350209-01

Need help finding your correct parts? Call any of our 6 locations today!

East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568

West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725

Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519

Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134

Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143

Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955

WWW.TEXTRAIL.COM

E-13

2010 Copyright by TexTrail, Inc.


TOWING

TO W I N G

WWW.TEXTRAIL.COM

E-14

2010 Copyright by TexTrail, Inc.


C A R G O CO N T R O L

CARGO CONTROL

Table Of Contents - Cargo Control Tie Loops Grab Handles D-Rings Rings Rope Rings Load Binder Chain Hooks Quick Links Links E-Track Cargo Management System Load Locker™ Winch Ratchets Ratchet Straps Winch Bar Corner Protectors Web Winder Ratchet Straps Axle Straps Rubber Straps Wheel Nets Wheel Chock Motorcycle Wheel Chock Gas / Water Cooler Holder Racks RACK'EM™ Trailer Dolly Bins WWW.TEXTRAIL.COM

F-2 F-2 F-2 F-2 F-2 F-3 F-3 F-3 F-3 F-3 F-3 F-4 F-4 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-5 F-6 F-6 F-6 F-6 F-6 F-6 F-6 F-1

2010 Copyright by TexTrail, Inc.


C A R G O CO N T R O L Tie Loops Part#

Ref #

Description

Diameter

I.D.

Style

Application

7500157

TLA122

Tie Loop - Aluminum

1/2"

2"

Round

Bolt-On

8850009

TLM122

Tie Loop - Metal

1/2"

2"

Round

Weld-On

5350715

TLM3812

Tie Loop - Metal

3/8"

1/2"

Bent

Weld-On

5350147

TLM7161

Tie Loop - Metal

7/16"

1"

Bent

Weld-On

5350146

TLM121

Tie Loop - Metal

1/2"

1-1/2"

Bent

Weld-On

5350716

TLM3821

Tie Loop - Metal

3/8"

2-1/4"

Square

Weld-On

5350222

TLM3811

Tie Loop - Motor Cycle Tie Down

3/8"

1-1/4"

Bent

Weld-On

8850109

TLM382

Tie Loop - Metal

3/8"

2"

Bent

Weld-On

5350719

GHM385

Grab Handle - Metal

3/8"

5"

Square

Weld-On

5350605

GHM7165 Grab Handle - Metal

7/16"

5"

Square

Weld-On

5350605

5350719

5350716

8850009

CARGO CONTROL

8850109 5350715

7500157

5350147

5350146

5350222

D-Rings & Rope Ring Part#

Ref #

Description

7500158

R716

Rope Ring - 7/16" dia. Aluminum bolt-on with bracket

1000 LB

9250089

R14

Rope Ring - 1/4" dia. steel zinc.

800 LB

9250088

R38

Rope Ring - 3/8" dia. steel zinc. Recessed 3" hole

850 LB

9250087

R14B

Rope Ring - 1/4" dia. steel zinc w/bazel

500 LB

9250019

DR12S

D-Ring - 1/2" dia. steel w/ weld-on bracket 12K UBS*

4080 LB

9250035

DR12Z

D-Ring - 1/2" dia. zinc w/ bolt-on bracket 12K UBS*

4080 LB

9250036

DR58S

D-Ring - 5/8" dia. steel w/ weld-on bracket 19K UBS*

6K LB

9250016-02

B50

D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* USA

15.5K LB

9250016

B50A

D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS*

2K LB

9250034

B801

Rope Ring - Recessed Zinc 3-5/8" hole 6K USB*

2K LB

9250033

B901

Rope Ring - Recessed Zinc 360째 Rotating 6K USB*

2K LB

Safe Working Load 7500158 9250089

9250088

9250087

9250034

*Ultimate Breaking Strength 9250035

9250036

9250019

9250016-02 9250033

WWW.TEXTRAIL.COM

F-2

2010 Copyright by TexTrail, Inc.


C A R G O CO N T R O L Load Binders and Chain Part #

Ref #

Description

9250059 LBLR Load Binder - 5/16" w/lever accepts 5/16" - 3/8" chain 9250060 LBRT Load Binder - 5/16" Ratchet accepts 5/16" - 3/8" chain 9250024 TRC516 Transport Chain - 5/16" x 20' w/ 5/16" Forged Hooks See Section J for more Chain.

CARGO CONTROL

Grab & Slip Hooks Part#

Ref #

8850072 8850073 8850074 8850097 8850017 8850016

GH14 GH516 GH38 SH14 SH516 SH38

Part# 8850090 8850091 8850092 7300045 9250401 9250012 9250403 9250368 9250369 8850018 8850019 8200146

Ref # 162S 225 231 316QL 516QL 38QL 12QL 516SL 38SL 716S 716SC 1270

Description

Safe Working Load 5,400 LB 5,400 LB 4,700 KB

Grade 70

Safe Working

Grade

Load

1/4" Grab Hook 7,800 UBS* 5/16" Grab Hook 11,700 UBS* 3/8" Grab Hook 16,200 LB UBS* 1/4" Slip Hook w/ Latch 7,800 UBS* 5/16" Slip Hook w/ Latch 11,700 UBS* 3/8" Slip Hook w/ Latch 16,200 LB UBS* *Ultimate Breaking Strength Hooks & Links Description Snap Hook - Double-End 3-1/2" x 5/8" Snap Hook - Swivel 3-1/2" x 5/8" Snap Hook - Open End 3-1/2" x 3/8" Quick Link - 3/16" 616 LB UBS* Quick Link - 5/16" 1540 LB UBS* Quick Link - 3/8" 1900 LB UBS* Quick Link - 1/2" 2650 LB UBS* Spring Link - 5/16” 350lb WLL Zinc Spring Link - 3/8” 425lb WLL Zinc S Hook - 7-16" 5K S Hook - 7-16" 5K w/ Catch Spring Link - Bulk 100 pk

2,600 LB 3,900 LB 16,200 LB 7,800 LB 11,700 LB 16,200 LB

8850090

G43 G43 G43 G43 G43 G43

8850091

SPRING

GRAB

SLIP

8850092

QUICK

*Ultimate Breaking Strength *DO NOT EXCEED ULTIMATE BREAKING STRENGTH. NOT DESIGNED FOR OVERHEAD LIFTING.*

Part # 9250049

Ref # 48117-25

E-Track Systems Description E-Track Horizontal 10' Green Primer

9250071

48117-21

E-Track Horizontal 10' Galvanized

9250136

40838-10

E-Track Vertical 10' Green Primer

9250053

40921-10

Standard Beam Socket for 2X4 lumber

9250046

49542-10

D-Ring 1K

9250047

47772-12

Tie Off 1K

9250048

40386-11

Rope Tie Off. Spring Actuated 1K

9250045

48672-13

Ratchet Buckle Strap 12' 6k webbing 1K load limit

WWW.TEXTRAIL.COM

9250071

9250049

9250136

9250045

F-3

9250046 9250053

9250047

9250103

2010 Copyright by TexTrail, Inc.


C A R G O CO N T R O L Part #

Cargo Management System Ref # Description

9250500

Rail - 97" x 2" Alum for floor or wall. Cut to size

9250504

Mount - LEFT Side Mount for 2x4 - Each

9250537

Mount - RIGHT Side Mount for 2x4 - Each

9250505

Mount - Pair 1 ea, 9250504 & 9250537

9250506

Tie Down - Anchor Tie Down - Each

9250507

Tie Down - Anchor Tie Down - Pair in Clam Pkg

9250533

Holding Brace for 9250530 - Each

9250512

Holding Brace for 9250530 - Pair in Clam Pkg

9250514

Lug Wrench Holder - Universal - Each

9250513

Lug Wrench Holder - Universal - Each Clam Pkg

9250516

Spare Tire Mount - Each

9250515

Spare Tire Mount - Each Clam Pkg

Tie downs give an anchor anywhere on your track. They hold cargo steady with your material of choice. Works with a tie down strap, rope, bungee cord or anything that can hang on. 9250506 EACH 9250507 PR - CLAM PKG

Keep your lug wrench out of the way. The lug wrench mount can mount anywhere. 9250514 - BULK 9250513 - EACH CLAM PKG

Aluminum load brace gives your system a finished look. Dove tails are extruded on both sides of brace for side to side locking. Comes 99� and is cut to size with 2 end caps. 9250530 99� Piece 9250531 Plastic End Cap Mount these in your trailer to hold your Load Brace or wooden 2x4 to store safely when not in use. 9250533 EACH 9250512 PR - CLAM PKG

Keep that spare tire out of the way. Tire mount comes with its own mini-track to mount independently. Existing track can be cut down any length and placed in any area it can be mounted. Can be used with any size tire. 9250516 EACH 9250515 EACH CLAM PKG

3 Easy Steps! Open Trailer Tire Mount also keep that spare tire out of the way. Tire mount comes with its own mini-track to mount independently. Can be used with any size tire. TexTrail Part # 9250538

WWW.TEXTRAIL.COM

F-4

2010 Copyright by TexTrail, Inc.

CARGO CONTROL

Side rails are the start of a load management system with slide mounts or tie downs. They are installed on the side of the trailer and /or the floor. They can easily be cut to adapt to trailer size. 9250500

2x4 slide mounts allow you to lock in your load with an aluminum load brace or wooden 2x4. 9250504 LH, 9250537 RH 9250505 PR - CLAM PKG


C A R G O CO N T R O L Cargo Control Part #

Ref #

Description

9250157

APS15

Ratchet Strap - 1" x 15' with S-Hooks

9250159

49368-10

Ratchet Strap - 1" x 15' with S-Hooks 4-Pack

43877-10 15’

9250111

43887-10

Ratchet Strap - 1" x 16' with Wire Hooks

9250108

43887-11

Ratchet Strap - 1" x 20' with Wire Hooks

43887-10 20’

9250371

SL82

Ratchet Strap - 1.25" x 16' with S-Hooks 700lb WLL*

9250372

SL32

Ratchet Strap - 1.5" x 15' with J-Hooks 400lb WLL*

9250130

557xx

Ratchet Strap - 2" x 15' with Flat Hooks 10K 3333 WLL*

9250115

45982-10

Ratchet Strap - 2" x 27' with Flat Hooks 10K 3333 WLL*

9250065

49347-10

Ratchet - Replacement for 9250115 and 9250130 with Flat Hook

9250102

41659-10-27

Strap - Replacement for 9250115 and 9250130 27' with Flat Hook

9250142

47640-30

Lashing Winch - 2" with Hex Drive 4.4K WLL*

9250109

43795-10-20

Strap - 4" x 27' with flat Hook 18K 5,400 WLL*

9250110

9250156

9250130

43795-10-30YAS Strap - 4" x 30' with flat Hook 18K 5,400 WLL* 43563-10

Winch - Use with 4" Straps Weld-On

9250150

43564-14

Winch - Use with 4" Straps Bolt-On

9250140

43565-12

Winch - Use with 4" Straps Storable Slider

9250153

42357-11

Winch Track - for use with 9250150

9250151

42313-10

Winch Bar - Standard Painted Black

9250152

42313-12

Winch Bar - Combination Box End Chrome

9250373

45801-10

Web Winder - use with 2" & 4" Straps Steel Painted

9250357

43986-10

Corner Protector - High Density Polymer Straps up to 4"

9250115 9250065 - ratchet 9250142 - strap

9250142

9250109-27’

9250149

9250150

9250140

9250357

9250153 9250373

9250151 9250152

Axle Straps and Wheel Nets Part #

Ref #

9250105

42101-31

Axle Strap - 2" Turned Snap Hook / Ratchet with Flat Hook BL5

9250106

49020-20

Axle Strap - 2" x 8' Flat Snap Hooks with Ratchet BL1

9250104

30AS21

Axle Strap - 2" x 21" with Protective Sleeve BL4

9250116

45982-42

Ratchet Strap - 2” x 27’ with J-Hooks 10K 3333 WLL*

9250393

12-10456

Ratchet - WITH Snap Hook 2”x15”

9250162

Description 9250106

9250142

40985-05-12 Sleeve - Replacement Protective Sleeve

9250156

2615SH

9250137

45143-22

9250138

30ATB

Wheel Net - Use with 13" - 17" Adjustable

9250139

30RT

Wheel Net - Use with 10" - 22" Tires with Ratchet

9250321

RTS9

Rubber Tie - 9" rubber

9250322

RTS15

Rubber Tie - 15" rubber

9250323

RTS21

Rubber Tie - 21" rubber

9250324

RTS31

Rubber Tie - 31" rubber

Soft Tie - 18" Motorcycle Extension 2-PACK Wheel Net - Use with 14" - 15" Non-Adjustable

WWW.TEXTRAIL.COM

F-5

Assorted Rubber Straps

2010 Copyright by TexTrail, Inc.

CARGO CONTROL

9250149


C A R G O CO N T R O L Motorcycle Wheel Chocks Part #

Ref #

9750014

9750016

Description

9750007

WC35

Wheel Chock - 3-1/2" Removable Chrome

9750008

WC55

Wheel Chock - 5-1/2" Removable Chrome

9750009

WC65

Wheel Chock - 6-1/2" Removable Chrome

9750016

WOTO

Wheel Chock - T-Bolt

9750017

MD010T

Wheel Chock - Mounting Hardware

9750022

SPWC3BT

Wheel Chock - 6-1/2" Removable Chrome

9750014

SPFKW

Wheel Chock Mounting (Wood Floor) Kit

Part #

Ref #

Description

6650612

RA-1L

5 Gal. Gas Can/Cooler Rack

6650625

RA-4

Back Pack Blower Rack

6650534

CARGO CONTROL

Cargo Solutions

6650626

RA-5

Trimmer Rack

6650628

RA-6

Trimmer Rack - For open trailer (pad locks sold separately)

6650635

RA-7

6-Hook Multi-Tool Rack

6650636

RA-10AB

Lubrication Rack & Bin

6650637

RA-10B

Lubrication Bin Only (Must be used with 6650636)

6650638

RA-10C

Lubrication Bin - Large Capacity (Must be used with 6650636)

6650639

RA-15

Shovel Rack

6650640

RA-18

Beverage Cooler Rack

6650641

RA-19

Blower Rack - For open trailer (pad locks sold separately)

9420022

RA-20

Trailer Dolly

9250170

6650636

6650637

6650638 6-Hook Multi-Tool Rack

Retracatable Cargo Buckle Strap S-Hook 2”x6’ ea 3.5k

Holds rakes, hoses, cords

9250171

2”x6’ Flush Cargo Buckle S-hool 3.5k

9250175

2”x6’ Cargo Buckle S-hool Adapter (use w/9250170)

9250172

2”x6’ Cargo Buckle 3.5k S-hook pair of marine buckles

almost anything.

9250176

Cargo Buckle e-track adapter O-ring (use w/9250170)

6650635

9250178

Cargo Buckle Mounting Brackets Universal Mount

and more; it can hold

See Section H for more Cargo Storage Solutions. This rack will securely hold 3

6650612

trimmers and has a built-in locking

6650639

mechanism.

8850641

6650628

The 3 or 5-gallon beverage cooler rack is designed for either an open or an enclosed trailer. 6650640

9250170

6650625 9250172 6650626 9250171

9250176

9420022

WWW.TEXTRAIL.COM

F-6

2010 Copyright by TexTrail, Inc.


C H E M I C A L S & CO AT I N G S

CHEMICALS & COATINGS

Table Of Contents - Chemicals & Coatings All Purpose Stain Remover Brake Cleaner Brake Fluid Chemicals Cleaner Gear Oil Grease Hardener Lubricants Metal Surface Cleaner Penetrating Oil Pin Stripers Primer Reducer Respirators & Scotch Brite™ Sealants Hand Towels TexTrail Value Finishes Transmission Fluid Valspar Finishes VHB Tape Warning & Specification Decals

WWW.TEXTRAIL.COM

G-5 G-3 G-3 G-3 G-5 G-3 G-3 G-6 G-3 G-5 G-3 G-2 G-6 G-6 G-2 G-4 G-5 G-6 G-3 G-6 G-2 G-2

G-1

2010 Copyright by TexTrail, Inc.


C H E M I C A L S & CO AT I N G S Craftsman

Deluxe

Pin Stripers Part# 8500079 8500123 8500124

Ref # CRAFTSMAN1 CRAFTSMAN2 DELUXE

Wheel Heads #95 (7/64") #115 (1/8") #16 (1/64") #57 (1/16") #25 (1/32”) #73 (3/32”) #93 (7/64”)

Description Beugler Craftsman Striping Tool Kit with 2-wheel heads, 1-cleaning brush and 2-guide arms Beugler Craftsman Striping Tool Kit with 2-wheel heads, 1-cleaning brush and 2-guide arms Beugler Deluxe Striping Tool Kit with 3-wheel heads, 1-cleaning brush and 3-guide arms

VHB™ Tape

Legend:

Ref #

Foam Type

4611

Firm

4611

Firm

4622

Conformable

4622

Conformable

4622

Conformable

4622

Conformable

4624

Conformable

4624

Conformable

4941F

Conformable

4941F

Conformable

4941F

Conformable

4941F

Conformable

Color White Dark Gray White White White White White White Gray Gray Gray Gray

Width 1" 1" 0.75" 1" 1" 1" 0.75" 1" 0.75" 0.75" 1" 1"

Thickness 0.045" 0.045" 0.045" 0.045" 0.045" 0.045" 0.062" 0.062" 0.045" 0.045" 0.045" 0.045"

Adhesive General Purpose General Purpose General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr General / Multi-Pupr Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose

Length 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS 36 YDS

Unit of Measure

9-Rolls 9-Rolls 1-Roll 1-Roll 2-Rolls 9-Rolls 1-Roll 1-Roll 12-Rolls 3-Rolls 2-Rolls 9-Rolls

Description 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape 3M VHB High Bond Tape

+ General Purpose Acrylic Adhesive: Bonds to most higher surface energy substrates including metal, glass and high surface energy plastics. + Multi-Purpose Acrylic Adhesive: Bonds to a wide range of materials including metals, glass, and high and medium surface energy plastics and paints. This unique adhesive also has the ability to resist the migration of plasticizers in vinyl substrates. + Conformable Foam Type: Provides high strength with the capability while maintaining high internal strength. + Firm Foam Type: Provides the highest level of foam strength in the 3M™ VHB™ Tape Family.

8500145

8500146

8500140

8500139

8500143

8500142

Respirators & Scotch Brite™ NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL).

Medium Large Ref# Description Welding Half Face piece Respirator Assembly with Particulate Filters 8500144 8500145 7182 2097 Particulate Filter with Nuisance Level Organic Vapor Relief for Welding Half Facepiece Respirator Assembly 100-count 8500146 7184 3M recommended for spray paint applications, with maintenance free design for convenience. Designed to be a truly maintenance free style respirator which is discarded when the organic vapor cartridges are spent. The packout includes the Maintenance Free Half Facepiece Respirator 07192 with permanently attached organic vapor cartridges, 1 pair of filter retainers 7054, and 1 pair of P95 filters 7194. Medium Large Ref# Description Spray Painting Half Facepiece Respirator Assembly with Particulate Filters 8500141 8500142 7192 5P71 Particulate Filter for Spray Painting Half Facepiece Respirator Assembly 100-count 8500143 7194 Designed to help provide comfortable, reliable worker protection for applications such as welding, soldering, cutting, grinding, and sanding. It features the 3M™ Cool Flow™ Exhalation Valve, adjustable M-noseclip, and braided headband to help provide a custom fit and secure seal. Per Box Part# Ref# Description Particulate Welding Respirator with Cool Flow™ Exhalation Valve 80-each 8500139 7189 Scotch-Brite™ General Purpose Hand Pad 6" x 9" Aluminum Oxide Abrasive Mineral Type 20-each 8500140 7447 Informational & Warning Decals Ref # Part# Type Description Warning 6800079 Safety Chain Warning 6800083 Danger / Caution Notice Warning 6800084 Cylinder Shock Pressure Can Cause Injury Warning 6800100 Danger to Hands & Feet Informational 6800098 Tire & Loading Information Warning 6800002 Do Not Go Under Raised Body

WWW.TEXTRAIL.COM

G-2

2010 Copyright by TexTrail, Inc.

CHEMICALS & COATINGS

Part# 6850007 6850008 6850006 6850001 6850002 6850003 6850005 6850004 6850009 6850010 6850011 6850012

3M™ VHB™ Tapes provide the convenience and simplicity of a tape fastener and are ideal for use in many interior and exterior applications.


C H E M I C A L S & CO AT I N G S

CHEMICALS & COATINGS

CHEMICALS AND LUBRICANTS DOT 3 Brake Fluid "DOT 3 Brake Fluid is a fully approved, DOT 3 type motor vehicle brake fluid suitable for use in all vehicles where DOT 3 fluids are recommended. It is suitable for both disc and drum brake systems. Meets or exceeds standards #116 SAE J1703 and ISO 4925." Part# Ref # Type Size Description 6700056 SUS 32 DOT-3 1-QT Brake Fluid 6700055 SUS 33 DOT-3 1-GL Brake Fluid Hi-Temp Red EP Lithium Grease Hi-Temp Red EP Lithium Grease Super S Hi-Temp Red Grease is a NLGI 2, lithium based premium quality, multi-functional grease with outstanding high temperature and extreme pressure characteristics. It provides excellent lubrication over a wide range of operation temperatures and services. Its dropping point exceeds 500째F. It also has outstanding lubrication qualities that extend over a wide range of Heavy-Duty/ Fleet applications including wheel bearings (disc and drum), vehicle chassis, boat trailers, universal joints, ball and roller bearings and many others. Super S Hi-Temp Red Grease is well suited for automotive, farm and industrial applications. Part# Ref # Type Size Description 6700047 SUS 67 #2 14-OZ Hi-Temp Red Grease 6700003 SUS 77 #2 1-LB Hi-Temp Red Grease 6700057 SUS 71 #2 35-LB Hi-Temp Red Grease Multi-Purpose (MP2) Lithium Grease Multi-Purpose (MP2) Grease is a NLGI 2, lithium based, water resistant grease for automotive and light to medium trucks, farm and industrial applications. It is recommended for automotive chassis lubrication points, ball joints and universal joints and resists softening at high operating temperatures. It seals out dirt and moisture contamination and protects against rust and corrosion. Part# Ref # Type Size Description 6700048 SUS 66 #2 14-OZ Multi-Purpose Blue Grease Multi-Purpose High Performance GL-5 Gear Oil Formulated for the most severe service conditions and environments in cars, trucks and heavy equipment. It provides excellent load carrying capability, wear resistance, oxidation stability, anti-rust, anticorrosion and anti-foam properties. GL-5 Gear Oil contain sulfur and phosphorus additive materials, but no zinc. Meets Military Specification MIL-L-2105C. Part# Ref # Type Size Description 6700054 SUS 17 80W90 1-QT High Performance GL-5 Gear Oil Multipurpose Dextron / Mercon (D/M) Automatic Transmission Fluid (ATF) Multipurpose D/M ATF is a multipurpose ATF designed for new generation, electronically controlled transmissions. It meets the latest GM Dexron III H Specification. It may also be used in previous transmissions built by General Motors, Daimler Chrysler, Ford (except where Type F required), and most foreign manufacturers, where a Dexron III G, Dexron IIE, Dexron II, Dexron, Mercon, or Type A Suffix A transmission fluid is specified. Part# Ref # Type Size Description 6700060 SUS 126 D/M 1-GL Multi-Purpose Automatic Transmission Fluid Brake Parts Cleaner & Penetrating Oil Non-Flammable Brake Parts Cleaner is a powerful solvent blend that easily removes brake fluid, grease, oil and dirt from brake parts. Penetrating Oil is a multipurpose product formulated to lubricate, penetrate, displace moisture and prevent corrosion. Loosens and frees rusty parts. Part# Ref # Size Description SUS 18-OZ 6700078 Non-Flammable Brake Parts Cleaner S107 Penetrating Oil 6700079

SUS S104

11-OZ

WWW.TEXTRAIL.COM

G-3

2010 Copyright by TexTrail, Inc.


C H E M I C A L S & CO AT I N G S CHEMICALS AND LUBRICANTS CONTINUED East Texas 2424 W Ferguson Rd. Mt. Pleasant, TX 75455 888-756-0547 Fax(903)575-0568

West Texas 12506 West I-20 East Odessa, TX 79765 800-333-1745 Fax(432)563-1725

Florida 5181 North US Hwy 441 Ocala, FL 34475 800-259-8712 Fax(352)629-7134

Oklahoma 300 Industrial Road Madill, OK 73446 877-795-3138 Fax(580)795-3143

Georgia 502 Midway Road Cordele, GA 31015 877-224-1520 Fax(229)273-0955

Houston 8404 N Freeway Houston, TX 77037 281-405-0825 Fax(281)405-0519

6700046

9420030

9420031

Tube Lube Grease Gun & Refill Cartridges Ref #

Size

Description

9420030

96-30132

3600 PSI

Mini Grease Gun Kit with one 3-OZ Cartridge

9420031

96-30192

4500 PSI

Mini Grease Gun Kit with one 3-OZ Cartridge

6700046

11300

3-OZ

4-Pack Multi-Purpose Lube Grease

CHEMICALS & COATINGS

Part#

Bearing Packer Part#

Ref #

Description

9420028

70-025

Deluxe Threaded Steel Post with Zerk Bearing Packer

9420028

Silicone Sealant TremPro 644 RTV is a one-part, acetoxy silicone sealant. TremPro 644 RTV cures to a flexible rubber when exposed to moisture present in the air. It is specially designed for sealant joints between most non-porous materials such as glass, aluminum, metal and metal alloys. It is easily gunnable over a wide range of temperatures and has excellent adhesion to most common substrates without the use of a primer. It has excellent handling characteristics and tools to a smooth, attractive finish. TremPro 644's superior skin time makes it ideal for OEM and production line uses. Do not use on galvanized steel, lead or copper.

Part#

Ref #

Size

Color

Description

6700200

TR644A

10.1-OZ

Aluminum

TremPro 644 RTV Silicone

6700201

TR644W

10.1-OZ

White

TremPro 644 RTV Silicone

6700202

TR644C

10.1-OZ

Clear

TremPro 644 RTV Silicone

6700203

TR644I

10.1-OZ

Ivory

TremPro 644 RTV Silicone Mat Spray Glue

Part#

Ref #

Size

Description

6700027

C012

15-OZ

Mat Spray Glue (Red)

WWW.TEXTRAIL.COM

G-4

2010 Copyright by TexTrail, Inc.


C H E M I C A L S & CO AT I N G S CHEMICALS AND LUBRICANTS CONTINUED Aluminum Cleaner And Brightener Streak Master Aluminum Cleaner And Brightener is the acid brightener of the future and the future is now. It has been developed to improve the safety of those cleaning with traditional aluminum cleaner and brightener (Hydrofluoric Acid Brightener); yet, still have a product that removes road film, grime, algae, scum, lime deposits, water line stains, oxidation, and brightens bare aluminum. Works just like the traditional aluminum cleaner and brightener (Hydrofluoric Acid Brightener) WITHOUT the negative hazards associated with that product. Forget the toxic and poisonous concerns and step up to new technology. Part#

Ref #

Size

Description

6700052

SMAB1

1-GL

Streak Master Aluminum Cleaner & Brightener Black Streak Remover

Removes black streaks that have set deep into the paint finish over time on campers, trailers and other equipment. Black Streak Remover is recommend when the stains have gone extremely deep into the paint and have been impossible to remove. After using the black streak remover, you can apply Ultra Guard product to protect the finish and stop streaks from setting in again. Part#

Ref #

Size

Description

6700051

SMKT1

1-GL

Streak Master Black Streak Remover Kit (includes 1-qt spray bottle)

6700050

SMBR1

1-GL

Streak Master Black Streak Remover Ultra Guard Wet or Dry Wash

Use Streak Master Ultra Guard as Wet Wash or Dry Wash. Dilute Ultra Guard to the desired dilution for any given job. Spray directly to the surface to be cleaned and wipe away grime and stains. With a dry towel, lightly buff to a brilliant clean and shine. Part#

Ref #

Size

Description

6700053

SMUG1

1-GL

Streak Master Ultra Guard Wet or Dry Wash

Part#

Ref #

Count

Description

6700010

1485412

72

Scrubs In-A-Bucket® Hand Towels

Hand Towels - Scrubs In-A-Bucket®

Supreme Reducers Fast Reducer

Medium Reducer

Slow Reducer

TexTrail Part Number

8500094

8500117

8500116

Temperature Range

Under 50° thru 75° F

65° thru 95° F

88° to over 100° F

Valspar's Acrylic/Urethane Hardener is specifically formulated to be used in Valspar's Supreme acrylic finishes. The hardener increases the gloss retention, chip, mar, and chemical resistance of the coating. The urethane hardener improves the production time by significantly improving the properties of the paint in tack free times, water spotting, and recoat times. The hardener is used at an 8 to 1 ratio (1-pint per 1-gallon or 2-quarts hardener to 5-gallons finish). Once the hardener is added to unreduced paint, reduce according to the recommendations using HAP Series Reducers. All mixed material should be used within four hours after mixing. Any material sprayed after four hours may be lower in gloss and will result in poor adhesion to the primer. Clean all equipment immediately after use.

WWW.TEXTRAIL.COM

G-5

2010 Copyright by TexTrail, Inc.

CHEMICALS & COATINGS

Supreme Acrylic Finishes Information

Valspar's 750 Series Supreme Acrylic Finishes are premium quality acrylics featuring exceptional gloss, distinctness of image (DOI), and weathering resistance. The 760 Series is also a low HAPS product when used with the HAP Series Reducers. The 760 Series is available in some finishes. The Supreme acrylic series features fast dry times allowing faster production rates. Supreme is supplied in a full-bodied viscosity allowing the painter to reduce the material with the appropriate temperature range reducer for the ambient application temperature. The Reducers and Hardeners are compatible with both the 750 and 760 Series Supreme Acrylic Finishes. Surface Preparation Why Prime? Primer adheres better to metal than a finish would; Primer give the metal better protection; and Primer provides a better surface for the finish to adhere to. Coating performance is affected by proper surface preparation. Coating integrity and service life will be reduced because of improperly prepared surfaces. As high as 70% of all coating failures can be directly attributed to inadequate surface preparation that affects coating adhesion. Selection and implementation of proper surface preparation techniques ensures coating adhesion to the substrate and prolongs the service life of the coating system. Use Valspar's Grey Hi-Build Non-Lifting Primer (8500040) 1-gallon (8500085) 5 gallons for your surface preparation. Use 1-part Reducer to 4-parts Primer Reduction For conventional spray, reduce 33-50 percent with reducer. For air less and air assist application, reduce 10-20 percent with reducer. The reducer and paint must be mixed well for proper application. For best results, use only Valspar's HAP Series Reducers for Supreme acrylic topcoats.


C H E M I C A L S & CO AT I N G S

CHEMICALS & COATINGS

PAINT

Ref#

Color

Description

SPRAY

1-GAL

5-GAL

750N939

Beige

Arizona Beige Pearl Metallic Acrylic Finish

8500008

8500084

8500118

750B989

Black

Black Acrylic Finish

8500006

8500045

8500115

750A939

Blue

Indigo Blue Metallic Acrylic Finish

8500028

8500041

-

750A022

Blue

Safety Blue Acrylic Finish

8500035

8500052

-

750X914

Gray

Storm Gray Pearl Metallic Acrylic Finish

8500036

8500070

8500083

750X902

Gray

Gray Metallic Acrylic Finish

-

8500049

-

750G118

Green

Olive Drab Acrylic Finish

8500034

-

-

750G945

Green

Amazon Green Metallic Acrylic Finish

8500005

8500004

-

750G040

Green

Implement Green Acrylic Finish

8500022

8500135

-

750A454

Orange

Equipment Orange Acrylic Finish

8500073

-

8500136

750N912

Pewter

Pewter Metallic Acrylic Finish

-

8500138

-

750R948

Red

Dark Red Acrylic Finish

8500018

8500068

-

750R974

Red

Victory Red Acrylic Finish

8500037

8500071

8500096

750R927

Red

Standard Red Acrylic Finish

8500007

8500112

-

750S926

Silver

Silver Metallic Acrylic Finish

8500017

8500044

-

750W959

White

Linen White Acrylic Finish

8500031

8500042

-

750Y902

Yellow

Caterpillar Yellow Acrylic Finish

-

-

8500082

750Y002

Yellow

Medium Yellow Acrylic Finish

8500033

8500047

-

750Y004

Yellow

Safety Yellow Acrylic Finish

8500016

8500053

-

Ref#

Color

Description

GAL

5-GAL

DRUM

-

-

8500094

8500002

-

8500117

-

-

8500116

HAP4575

Fast Acting Reducer for Cold Weather

HAP6590

Medium Acting Reducer for Warm Weather

HAP85100

Slow Acting Reducer for Hot Weather

341X017

Gray Hi-Build Non-Lifting Primer

8500040

8500085

-

699C900

Acrylic Finish Hardener

8500092

-

-

Value Finishes Ref#

Color

Description

1-PINT

1-GAL

TT-105

Black

TexTrail

Industrial High Gloss Finish

-

8500056

TT-114

Red

TexTrail

Industrial High Gloss Finish

-

8500059

TT-139

Gray

TexTrail

Industrial High Gloss Finish

-

8500060

TT-212

Blue

TexTrail

Industrial High Gloss Finish

-

8500062

TT-109

Red

TexTrail

Industrial High Gloss Finish

-

8500063

TT-108

Yellow

TexTrail

Industrial High Gloss Finish

-

8500064

TT-106

White

TexTrail

Industrial High Gloss Finish

-

8500065

TT-323

Green

TexTrail

Industrial High Gloss Finish

-

8500067

TT-1002

Gray

TexTrail

Industrial Primer

-

8500066

TexTrail

Industrial Catalyst Hardener

8500072

8500061

TT-1501

WWW.TEXTRAIL.COM

G-6

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E

BODY & FRAME

Table Of Contents - Body & Frame Air Conditioning Aluminum Box (Underbody, Tongue & Specialty) Aluminum Trim Ball Corners Box (Aluminum & Powder Coated Underbody & Tongue, Specialty) Caps for Gate Ramp Assemblies Ceiling Heat & Air Units Chrome Edge Trim "D" Bumpers Drill Bits Dump Tarp Kits Edge Guard Electric Fan Fenders Floor Screws Gate Lift Assist Generators Gravel Guard Gussets Heating Units Hydraulic Hoist Systems Light Protectors & Brackets Liquid Storage Tanks Mud Flaps Nose Bows Nose Caps Pipe Bows Powder Coated Box (Underbody, Tongue & Specialty) RACK-EM Double Barrel Gate Lift Assist Ramps Ramp Gate Assemblies Ramp Springs Rivets & Rivet Tools Rockshield Roof Bows (Round Pipe) Roof Bows (Square Tube) Roof Caps Rubber Mats Rumber速 Products RV Generators Self Tapping Torx速 Head Floor Screws Single Axle Fenders & Fender Backs Slats Specialty Box Springs for Ramps Stake Pocket Straps Tandem Axle Fenders & Fender Backs Tarp Kits Tongue Box Torx速 Head Self Tapping Floor Screws Torx速 Screw Bits & Holder Tradesman Boxes Trim Truck-Tack Boxes Triple Axle Fenders & Fender Backs Underbody Box Vents Water Caddy Water Cooler Rack Wedge Caps

WWW.TEXTRAIL.COM

H-1

H-7 H-17 H-8 & H-9 H-5 H-17 H-15 H-7 H-8 & H-9 H-12 H-16 H-19 H-6 H-7 H-2 H-10 H-14 H-8 H-6 H-6 H-7 H-19 H-7 H-18 H-12 H-5 H-5 H-6 H-17 H-14 H-14 H-15 H-16 H-10 H-6 H-6 H-5 H-5 H-12 H-11 H-8 H-10 H-2 H-5 H-18 H-15 H-16 H-19 H-3 H-19 H-17 H-10 H-10 H-18 H-8 & H-9 H-17 H-4 H-16 H-8 H-13 H-13 H-5

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E SINGLE FENDERS

Ref # 10166 11378 10136 10145 11128 10570 10164 10149 10151 10155 10157

Part# 7050008 7050347 7050018 7050019 7050020 7050028

Ref # 10200 67473 10189 10191 10193 10198

Part# 7050014 7050021

Ref # 10171 20114

Part# 7050013 7050016 7050024

Ref # 10166 10169 10143

Part# 7050058 7050005 7050087 7050003 7050065

Ref # 10013 10009 10016 11111 10012

Width 7" 7" 8" 9" 9" 9" 9" 9" 9" 10-3/4" 10-3/4"

Single Axle 1" Radius Fenders With 90째 Lip Length Height Material Wheel Size Fender Back 21" 6" 16-GA 7050005 28" 10-3/4" 16-GA 13" 7050005 28" 10" 16-GA 13" 7050005 32" 15" 16-GA 15" 7050058 32" 15" 0.100 ATP 15" Included 32" 15" 0.100 ATP 15" 7050058 32" 15" 14-GA TP 15" 7050058 32" 16" 16-GA 16" Included 36" 18" 16-GA 16" 7050087 32" 16" 16-GA 15" 7050058 36" 18" 16-GA 15" 7050087

Single Axle 1/2" Radius Both Sides - Square Broke Fender Width Length Height Flat Material 10" 33" 16-1/2" 20" 16-GA 10" 32" 13" 8" 23" 9" 15" 16-GA 8" 26" 10" 17" 16-GA 8" 28" 9" 20" 16-GA 9" 32" 13" 22" 16-GA Single Axle 1" Radius Both Sides Fender Width Length Height Material Wheel Size 7" 28" 10" 16-GA 12" 8" 28" 10" 16-GA 12" Single Axle 1-1/2" Radius Both Sides Fender Width Length Height Material Wheel Size 7" 21" 6" 16-GA 8" 7-1/2" 23-1/2" 6-1/2" 14-GA 12" 9" 29" 8-1/2" 16-GA 13" Single Axle Fender Backs Width Length Material Notes 12" 31" 16-GA 8-1/2" 27" 18-GA 12" 34-1/2" 18-GA Rectangular 6-1/2" 21-3/4" 18-GA 10-1/2" 29-3/4" 18-GA Square Broke

Notes

Welded Back

Welded Back

Wheel Size 16"

Fender Back 7050087

8" 13" 13" 15"

7050087 7050087 7050087 7050065

Notes

Notes

GA = Gauge ATP = Aluminum Tread Plate

WWW.TEXTRAIL.COM

H-2

2010 Copyright by TexTrail, Inc.

BODY & FRAME

Part# 7050013 7050017 7050022 7050026 7050025 7050103 7050075 7050006 7050029 7050009 7050010


B O DY & F R A M E TANDEM FENDERS

Part# 7050030 7050002 7050032 7050034 7050041

Tandem Axle 1" Radius Fenders With 90° Lip Length Height Material Wheel Size 66" 19-1/2" 16-GA 14" 72" 21" 16-GA 15" 72" 20" 14-GA TP 15" 72" 20-1/2" 16-GA 15" 72" 20-1/2" 16-GA 16"

Ref # 10002 10238 10250 10236 10242

Width 9" 9" 9" 9" 10-3/4"

Ref # 10670 10336

Tandem Axle 1" Radius Both Sides Fender With 90° Lip Square Broke Width Length Height Material Fender Back Notes 10-3/4" 72" 21-1/2" 16-GA 7050059 10” 72” 17” 14-GA 7050059

Part# 7050085

Ref # 10330

Tandem Axle 1" Radius Both Sides Fender With 90° Lip Double Square Broke Width Length Height Material Fender Back Notes 9" 72" 17" 14-GA TP 7050064

Part# 7050035 7050036 7050039 7050042

Tandem Axle 1" Radius Both Sides Tear Drop Fender With 90° Lip Double Square Broke Ref # Width Length Height Material Fender Back Notes 10333 9" 72" 16-1/2" 16-GA 7050067 10335 9" 72" 17" 14-GA TP 7050143 21550 10" 72" 17" 16-GA 7050067 10693 10-3/4" 72" 17" 14-GA TP 7050143 GA = Gauge ATP = Aluminum Tread Plate

Notes Welded Back

BODY & FRAME

Part# 7050011 7050038

Fender Back 7050088 Included 7050062 7050060 7050060

WWW.TEXTRAIL.COM

H-3

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E TANDEM FENDERS CONTINUED

Ref # 10257 10291 10297 11073 10262 10268 10294 10276 10388

Width 9" 9" 9" 9" 9" 9" 10-3/4" 10-3/4" 13"

Part# 7050015

Ref # 11472

Width 12"

Part# 7050088 7050059 7050061 7050063 7050067 7050060 7050062 7050068 7050064

Ref # 10027 10026 10036 10037 10010 11046 10039 13150 11132

Width 12" 12" 12" 12" 12" 12" 12" 12" 14"

Part# 7050070

Ref # 10342

Width 9"

Part# 7050049 7050040 7050050 7050038

Ref # 10345 10344 10056 10349

Width 9" 10-3/4" 9" 10"

Part# 7050089

Ref # 10054

Width 12"

Tandem Axle 1" Radius Tear Drop Fender With 90째 Lip Length Height Material Wheel Size Fender Back 66" 19-1/2" 16-GA 14" 7050088 72" 20" 14-GA TP 16" 7050062 72" 20-1/2" 0.100 ATP 16" 72" 20-1/2" 0.100 ATP 15" Included 72" 21" 16-GA 15" 7050060 72" 21" 16-GA 15" Included 72" 20-1/2" 14-GA TP 16" 7050062 72" 21" 16-GA 16" 7050060 72" 20-1/2" 16-GA 16" 7050060 Tandem Axle 1-1/2" Radius Tear Drop Fender With 90째 Lip Length Height Material Wheel Size Fender Back 72" 20" 0.090 Smooth Alum Tandem Axle Fender Backs Length Material Notes 63" 18-GA 66-1/4" 18-GA Square Broke 69" 18-GA 69" 18-GA Square Broke Smooth Aluminum 71-3/4" 18-GA Double Square Broke 69" 16-GA 69" 14-GA TP 69" 14-GA TP Rectangle 72" 14-GA TP Double Square Broke GA = Gauge ATP = Aluminum Tread Plate Triple Fenders

Length 108"

Triple Axle 1" Radius Fenders With 90째 Lip Height Material 21" 16-GA

Wheel Size

Triple Axle 1" Radius Tear Drop Fenders With 90째 Lip Length Height Material Wheel Size 108" 21" 16-GA 108" 16-GA 108" 21" 14-GA TP 108" 21" 14-GA TP Triple Axle Fender Backs Length Material Notes 105" 18-GA

WWW.TEXTRAIL.COM

H-4

Notes

Welded Back Welded Back

Notes

BODY & FRAME

Part# 7050052 7050054 7050076 7050033 7050055 7050001 7050044 7050045 7050047

Fender Back 7050089

Notes

Fender Back 7050089 7050089 7050089 7050064

Notes

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E FENDER COMPONENTS Part#

Ref #

Size

Ball Corners Material

Description

7500007

6311

6" x 6"

19-GA

Steel Ball Corner

7500006

6310

12" x 12"

19-GA

Steel Ball Corner

Part# 7500030 7500031 7500206

Ref # 5012 5000 5323

Steel Nose / Roof / Wedge Caps Width Height Depth 60" 15" 37" 72" 15" 37" 80" 12" 30"

Part# 7500043 7500044

Ref # 5079 12921

Width 5-1/2" 6"

Radius 12" 12" 6"

Material 19-GA 19-GA 19-GA

Metal Slats Length 16' 20'

Material 19-GA 18-GA

Description Grooved Slat Pre-Formed Slat

Straight Roof Bows Width 48" 60" 72" 80" 84" 96" 60" 72" 80" 84" 96" 60" 72" 80" 84"

Radius 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 6" 12" 12" 12" 12"

Tube 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square 1" Square

Material 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA 16-GA

Radius 12" 12" 12"

Tube 1" Square 1" Square 1" Square

Material 16-GA 16-GA 16-GA

Most Roof Bows are also available “Cambered”

Ref # 64177 64127 64137 64087 64097 64157 6412 6413 6408 6409 6415 6410 6411 6407 6416

Height 7" 7" 7" 7" 7" 7" 8" 8" 8" 8" 8" 14" 14" 14" 14"

Aerodynamic

Part# 7500208 7500209 7500210

Ref # 5302-72 5302-80 5302-96

Length 30" 30" 30"

WWW.TEXTRAIL.COM

Nose Bows Width 72" 80" 96" H-5

2010 Copyright by TexTrail, Inc.

BODY & FRAME

Part# 7500081 7500072 7500073 7500070 7500071 7500074 7500034 7500036 7500075 7500076 7500077 7500033 7500035 7500078 7500080


B O DY & F R A M E

Part# 7500024 7500017 7500018 7500020 7500193 7500022 7500025 7500023

Ref # 9AE 12AE 14AE 18AE 7NS 9NS 12NS 18NS

Width 9" 12" 14" 18" 7" 9" 12" 18"

7500015

Aluminum & Non-Skid Gravel Guard Material Pattern Aluminum Diamond Aluminum Diamond Aluminum Diamond Aluminum Diamond Non-Skid Plain Black Non-Skid Plain Black Non-Skid Plain Black Non-Skid Plain Black

Description Gravel Guard Gravel Guard Gravel Guard Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard Self Adhesive Gravel Guard

5350247

5350245

BODY & FRAME

Back View=

Part# 5350245 5350244 5350384 5350247 7500180 7500015 7500008 7500182

Ref # 11189 78127 11197 11196 22130 22140 22150 22170

Length 83" 83" 83" 83" Per Foot Per Foot Per Foot Per Foot

Part# 7500090 7500085 7500091

Ref # 64172 64315 64496

Tall 78" 80" 84"

Part# 5350179 5350180 5300008 5300004 5300005 5350170 5350171 5300001 5300002 5350023 5350024 5300003

Ref # 71610RH 71610LH 11701LR 11324LH 11324RH 111810LH 111810RH 1534GL 1534GR 2034LH 2034RH 2430G

Rockshield & Edge Guard Height Material 34" 0.10 Alum 34" 12-GA Smooth 43-1/2" 0.100 Alum 43-1/2" 12-GA Smooth 3/32" Flexible PVC 1/8" Flexible PVC 1/8" Flexible PVC 3/16" Flexible PVC Pipe Roof Bows Width Radius 72" 6" 80" 6" 84" 6" Gussets

Descriptions 7" x 16-1/16" 10-Gauge Right Hand 7" x 16-1/16" 10-Gauge Left Hand 8-3/4" x 8-3/4" with 1" Lip Left or Right Hand 12-Gauge 10" x 8" with 1-1/2" Lip Left Hand 14-Gauge Tread Plate 10" x 8" with 1-1/2" Lip Right Hand 14-Gauge Tread Plate 11-1/4" x 18-1/2" 10-Gauge Left Hand 11-1/4" x 18-1/2" 10-Gauge Right Hand 15" x 34-3/16" with 1" Lip Left Hand 15" x 34-3/16" with 1" Lip Right Hand 20" x 34" x 3/16" Left Hand 20" x 34" x 3/16" Right Hand 24" x 30" x 1/4" Flat without Lip

WWW.TEXTRAIL.COM

H-6

Description Aluminum Diamond Plate Rockshield Steel Rockshield Aluminum Diamond Plate Rockshield Steel Rockshield Durable Clip-on Black Edge Trim Durable Clip-on Black Edge Trim Durable Clip-on Chrome Edge Trim Durable Clip-on Black Edge Trim Pipe 1-5/8" 1-5/8" 1-5/8"

Material 16-GA 16-GA 16-GA

Pipe Roof Bows

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E

8100148

8100149

5350211

5350085

Part# 8100148 8100149 5350210 5350211 5350082 5350371 5350392 5350085

Ref # 10499 10522 8128L 8128R 8147 8101 113LTBS 8122

5350082

5350371

5350210

5350392

Light Mounting Brackets / Protectors Description Left Hand Stop, Tail & Turn Light Protector Bracket Steel without License Light Right Hand Stop, Tail & Turn Light Protector Bracket Steel with License Light Left Hand Oval Stop, Tail & Turn Light Protector Bracket Steel with 2" Side Marker Hole Right Hand Oval Stop, Tail & Turn Light Protector Bracket Steel with 2" Side Marker Hole Stop, Tail & Turn Light / License Plate Bracket 5-3/4" x 7-3/4" Stop, Tail & Turn Light Protector Bracket Clearance Marker Light Bracket 5" Clearance Marker Stud Mounted Light Bracket Heavy Duty 12V 2-Speed Chrome Fan

Part#

Ref #

Description

8720010

850

Heavy Duty 12V 2-Speed Chrome Fan with Swivel Base

7330003

Ref #

7330031

468-4

Air Conditioning / Heat Pump Units & Ceiling Units Description Dometic Brisk Air Conditioning Unit Heating Kit for Non-Ducted Models. Use with 13,500 BTU Brisk Air Unit (7330003). White Color.

7330003

468

13,500 BTU Air Conditioning Outside Roof Unit with Slinger features that minimize condensation run-off. White Color.

7330004

468-8

15,000 BTU Air Conditioning Outside Roof Unit with Slinger features that minimize condensation run-off. White Color.

7330032

469-11

Dometic Brisk Air Conditioning Unit Heating Kit for Ducted Models. Use with 15,000 BTU Brisk Air Unit (7330004).

7330005

469-2

Air Conditioning Ceiling Unit with 5,600 BTU Heat Strip. Features Air Sweep*/Air Shower**. Compatible only with the 7330003 and 7330004 Outside Roof Units.

AIR V Air Conditioner Dometic Cold or Hot Conditioning Air Distribution Box (ADB) Kit for Recreational Vehicles, campers, horse trailers, living quarters, etc. Use this Ceiling unit with Brisk Air Model Capable 13.5K (7330003) and 15K (7330004) BTU Roof Units. May also be used with 5.6K BTU Heat Kits 7330031 and 73300032. Brisk Air Model features Easy-to-reach controls, fully adjustable louvers, reusable filter and three-speed blower make it a breeze to deliver just the right amount of air with this traditional style ADB.

7330005

WWW.TEXTRAIL.COM

H-7

2010 Copyright by TexTrail, Inc.

BODY & FRAME

Part#


BODY & FRAME

B O DY & F R A M E

Part# 7500057

Ref # 6501

Part# 7500055 7500061 7500215

Ref # 6265 6260 626T

Part# 8290002 8290003 8290004 8290005 8290006 8290098 8290097

Ref # 2051 2158 1647 1646 2185 1659 1660

Part# 7500008

Ref # 18ET

Part# 7500013

Ref # 118V

Part# 7500050 7500052 7500131

Ref # 1923 1924 2625

7500057

7500055

Round Butterfly Vent Size Finish Description 7-1/2" Aluminum Round Butterfly Vent Pop-Up 2-Way Trailer Vents Type Finish Description Pop-Up Black Steel Vent with Gasket & Screen Pop-Up Aluminum Steel Vent with Gasket & Screen Plastic Black Trim Ring for 7500055 & 7500061 Dome Style Vents Type Finish Description Dome Vent 14x14 without Garnish Dome Vent 14x14 without Garnish with 12-Volt Fan Vent Cover Galvanized 14x14 Dome Vent Vent Cover White Plastic 14x14 Dome Vent Vent Garnish 1-7/8" to 3" Roof Dome Vent 14x14 White Crank Top with Screen Dome Vent 14x14 Metal Crank Top with Screen White Chrome Edge Trim - Durable & Flexible PVC Fits Description 1/8" Self-Adhesive Chrome Edge Trim Aluminum V-Trim Width Length Description 1-1/8" 12' Aluminum "V" Trim Chrome Trim with Lip Width Length Description 1" Per Foot Chrome Trim with Lip* 1-1/4" Per Foot Chrome Trim with Lip 1-5/8" Per Foot Chrome Trim with Lip * Same measurements except width as 7500052.

8290004

WWW.TEXTRAIL.COM

7500008

H-8

7500052

7500131

7500013

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E

Part# 7500049 7500194 Part# 7500053 Part# 7500038 7500039

Part# 7500048 Part# 7500204 Part# 7500180 7500015 7500008 7500182

Ref # 22130 22140 22150 22170

Height 3/32" 1/8" 1/8" 3/16"

Edge Guard Material Description Flexible PVC Durable Clip-on Black Edge Trim Flexible PVC Durable Clip-on Black Edge Trim Flexible PVC Durable Clip-on Chrome Edge Trim Flexible PVC Durable Clip-on Black Edge Trim

WWW.TEXTRAIL.COM

H-9

7500049

7500053

7500194

7500038

7500039

7500045

7500051

7500014

INSERTS

7500048

7500204

7500015

2010 Copyright by TexTrail, Inc.

BODY & FRAME

Part# 7500045 7500051 7500014 7500028 7500065 7500054 7500064 7500027 7500026

Chrome Flat Trim Ref # Width Length Description 6439 1-3/8" Per Foot Flat Aluminum Chrome Trim 4681 1" Per Foot Flat Aluminum Chrome Trim with Lip Polished Gravel Plate Trim Ref # Width Length Description 213 3/4" Per Foot Aluminum Gravel Plate Trim Polished Drip Rail Trim Ref # Width Length Description 688 3/4" Per Foot Aluminum Drip Rail Trim 788 1-1/4" Per Foot Aluminum Drip Rail Trim Polished Slot Series Insert Trim & Vinyl Inserts Ref # Width Length Description 1904 1-1/4" Per Foot Aluminum Uneven Lip Insert Trim 2605 1-1/4" Per Foot Aluminum Even Lip Insert Trim 3590 1-1/4" Per Foot Aluminum Uneven Lip Insert Trim 17BK 1" Per Foot Black Vinyl Trim Insert 17CB 1" Per Foot Brown Vinyl Trim Insert 17CW 1" Per Foot White Vinyl Trim Insert 17DB 1" Per Foot Blue Vinyl Trim Insert 17RD 1" Per Foot Red Vinyl Trim Insert 17SG 1" Per Foot Silver Grey Vinyl Trim Insert Inserts available in 750' Rolls Mill Finished Wall Board Trim Ref # Width Length Description 14287 0.800" Per Foot Wall Board Mill Finished Trim Mill Finished Floor / Wall Trim Ref # Width Length Description 9144 3/4" Per Foot Floor / Wall Trim - Aluminum Angle


BODY & FRAME

B O DY & F R A M E Torx® Screwdriver Bit and Holder Part# Ref # Size Description 9420055 T14 Screw Bit Holder for Torx® Driver 1/4" Drive 9420053 T25 1/4" Torx® Hex Screw Bit for 3/16" Drive 7030163 T30 1/4" Torx® Hex Screw Bit for 1/4" Drive 9420054 T40 5/16" Torx® Hex Screw Bit for 1/4" Drive Torx® Head Floor Screws Part# Ref # Size Length Description 7030063 1420100 1/4"-20 1" Self Tapping Torx® Head Screw 7030057 1420150 1/4"-20 1-1/2" Self Tapping Torx® Head Screw 7030053 1420200 1/4"-20 2" Self Tapping Torx® Head Screw 7030058 1420225 1/4"-20 2-1/4" Self Tapping Torx® Head Screw 7030170 1420250 1/4"-20 2-1/2" Self Tapping Torx® Head Screw 7030059 1420300 1/4"-20 3" Self Tapping Torx® Head Screw 7030060 5160250 5/16"-18 2-1/2" Self Tapping Torx® Head Screw 7030061 5160300 5/16"-18 3" Self Tapping Torx® Head Screw Rivets and Rivet Guns For use on copper, brass, tin, lead, steel, aluminum, pewter and zinc—virtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 speciallyhardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. Easy-to-handle gun weighs less than 1-1/2 lbs Part# Ref # Diameter Hole Size Drill Hole Length Grip 7030316 AA42D 1/8" .129-.133 9/64" 0.265 .032-.125 7030315 AA44D 1/8" .129-.133 9/64" 0.390 .188-.250 7030314 AA45D 1/8" .129-.133 9/64" 0.515 .251-.312 7030313 AA46D 1/8" .129-.133 9/64" 0.515 .313-.375 7030312 AA48D 1/8" .129-.133 9/64" 0.640 .376-.500 7030311 AA54D 5/32" .160-.164 11/64" 0.465 .188-.250 7030310 AA56D 5/32" .160-.164 11/64" 0.540 .251-.375 7030309 AA64D 3/16" .192-.196 13/64" 0.440 .126-.250 7030308 AA64LF 3/16"x5/8" .192-.196 13/64" 0.440 .126-.250 7030307 AA68 3/16" .192-.196 13/64" 0.565 .251-.375 7030306 SS66D 3/16" SS .192-.196 13/64" 0.565 .251-.375 7030305 AA66LF 3/16"x5/8" .192-.196 13/64" 0.565 .251-.375 7030300 AA68D 3/16" .192-.196 13/64" 0.690 .376-.500 7030301 AA610 3/16" .192-.196 13/64" 0.815 .501-.625 7030302 AA610LF 3/16"x5/8" .192-.196 13/64" 0.815 .501-.625 7030303 AA612 3/16" .192-.196 13/64" 0.940 .626-.750 7030304 AA612LF 3/16"x5/8" .192-.196 13/64" 0.940 .626-.750 Part# Ref # Description 9420052 8550 Heavy Duty Manual Rivet Tool

WWW.TEXTRAIL.COM

H-10

9420055

Torx® Bit

9420052

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E FLOORING

Rumber® is a extremely tough and durable material that is easy to clean and is perfect for trailer flooring and extreme conditions. It is stronger than other composites, is impervious to water, and is UV resistant. Rumber boards will not crack, rot, or split making your investment last longer. Rumber is environmentally friendly material, a natural choice for a number of specialized projects. It is the most cost-effective option to flooring.

Rumber® Trailer Flooring Part# 7040030-06 7040030-07 7040030-08 7040030-10 7040030-16 7040030-20 7040030-24 7040033-06 7040033-07 7040033-16 7040033-20

Ref # 9102 9102 9102 9102 9102 9102 9102 9501 9501 9501 9501

Actual Dimensions Length Description

1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 7" 1.5" x 5.5" 1.5" x 5.5" 1.5" x 5.5" 1.5" x 5.5"

6' 7' 8' 10' 16' 20' 24' 6' 7' 16' 20'

Rumber® is available in various sizes and textures. Contact your TexTrail Sales representative for complete installation requirements.

WWW.TEXTRAIL.COM

H-11

2010 Copyright by TexTrail, Inc.

BODY & FRAME

2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 8" Tongue & Groove Traction Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring 2" x 6" Tongue & Groove Board Surface Rumber Flooring Rumber® Wall Liner 7040010 200 48" x 96" x 0.200 4' x 8' x 3/16" Textured Black Rumber Wall Liner Sheet 7040011 250 48" x 96" x 0.250 4' x 8' x 1/4" Textured Black Rumber Wall Liner Sheet 7040012 350 48" x 96" x 0.350 4' x 8' x 11/32" Textured Black Rumber Wall Liner Sheet Rumber® Wheel Chocks 7040013 4121-8 8" Wheel Chock with Eye 7040014 4121-8H 8" Wheel Chock with Handle Rumber® Horse Trailer Accessories 7040015 9901-0 Black Textured Saddle Rack - No Holes 7040016 44618 4"W 29-1/2" Black Bridle Hook Rack 8-Hooks 7040017 20021 7"H x 6"D 17" Black Brush Tray 7040018 20022 7"H x 6"D 27" Black Brush Tray Rumber® Materials Installation Guidelines Application Rumber® Part Number Centers Screws Miscellaneous Truck / Platform Beds 9102, 9302 & 9502 Maximum 12” 2 Tongue & Groove must be tightly engaged. Livestock / Horse Trailers 9102, 9302 & 9502 Maximum 15” 2 Tongue & Groove must be tightly engaged. Trailer Ramps 9806 & 9808 Maximum 12” 2 Tongue & Groove must be tightly engaged. Shiplap must be engaged Cargo Van / ATVs 9805, 9807 & 9808 Maximum 12" 2 Utility Under 14,000 GVW 9102, 9302 & 9502 Maximum 12" 2 Tongue & Groove must be tightly engaged. Utility Over 14,000 GVW 9102, 9302 & 9502 Maximum 9" 2 Tongue & Groove must be tightly engaged.


B O DY & F R A M E RUBBER MATTING

Ribbed Pattern

BODY & FRAME

Diamond Plate

Part# 8700018 8700011 8700001 8700002 8700003 8700004 8700015 8700016 8700010 8700013 8700007

Ref # 9148 9147 9020 9035 9040 3640 9045 4871 4712 4812 5712

Part# 8700021 8700019 8700020 8700009

Ref # 106196 31628 31631 4850

Part# 8700028

Ref # 121641

Part# 6700027

Ref # CO12

Part# 7500237 7500009 7040009

Ref # 100578 100579 200096

Rubber Floor & Wall Mats Length Description 60" Diamond Plate Pattern Rubber Floor Mat 84" Diamond Plate Pattern Rubber Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Ribbed 1"W Tapered Rib with 3/4"W Valleys Floor Mat Per Foot Diamond Plate Pattern Rubber Floor Mat 71" Flat Rubber Floor Mat 84" Flat Rubber Floor Mat 96" Flat Rubber Floor Mat 84" Flat Rubber Floor Mat Rubber Wall Mats Thickness Width Length Description 3/16" 53-1/4" 72" Rubber Wall Mat 3/16" 28" Per Foot Textured Rubber Wall Mat 3/16" 31" Per Foot Textured Rubber Wall Mat 3/16" 48" Per Foot Textured Rubber Wall Mat Rubber Ramp Mat Thickness Width Length Description 1/4" 48" Per Foot Ribbed Rubber Ramp Mat Rubber Mat Glue Size Description 15-OZ Red Spray Mat Glue Pre-Drilled Rubber Bumpers F* Bolt Size Description A B C D E* 2" 96" 2" 11-1/2" 5/8" 8 3/8" Rubber "D" Bumper 3" 96" 4" 11" 1-1/8" 8 9/16" Rubber "D" Bumper 3" 96" 4" 11" 1-1/8" 9 9/16" Rumber速 Grooved Surface "D" Bumper Thickness 1/2" 1/2" 5/16" 5/16" 5/16" 5/16" 5/16" 1/2" 1/2" 1/2" 1/2"

Width 48" 48" 24" 30 34" 36" 36" 48" 48" 48" 60"

*E = Hole Size F = Number of Holes

Part# 8300008 8300009 8300011 8300010 8300004 8300001 8300005 5350063

Ref # 118519 115341 121061 121062 161019 24303 2430 82123

Flat Mat

Size 7-1/8" x 1" 7-1/8" x 1" 7-1/8" x 1" 7-1/8" x 1" 19" x 24" 24" x 30" 24" x 30" 1/4" X 3"

7500009

Mud Flaps Description Dual Powder Coated Mud Flap Bracket Set 19" Single Powder Coated Mud Flap Bracket Set 12-1/4" Single Powder Coated Mud Flap Strap 12-1/4" Dual Powder Coated Mud Flap Strap 19" Rubber Mud Flap Rubber Mud Flap 3/16" Rubber Mud Flap 23" Mud Flap Mounting Bracket

WWW.TEXTRAIL.COM

H-12

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E FRAME AND BODY COMPONENTS The 7500059 fits conveniently in the corner of your walk-in-tack room utilizing the “dead space”. It features a fill hole with a vent at the top of the tank for easy filling. Located at the bottom the tank is a shut off valve to hook your hose to for filling water buckets. The optional stand (7500058) will place the tank higher for easier access to the shut off valve and compartment for out-of-the-way storage of your hose. Part# 7500059 7500058 Part# 7180002 7180003 7180004

Ref # 444 451 712

Height 6' 6' 7'

Width 44" 51" 1'

BODY & FRAME

Part# 8600011 8600012 8600013

Water Caddy Ref # Thickness Width Length Description SL-25 1/2" 48" 60" 25-Gallon Corner Water Caddy 14.5" x 56" 3-Sided SL-STD 1/2" 48" 84" 11-1/2" Water Caddy Stand with Storage Compartment Landscape Boxes Ref # Height Depth Length Description 242464 24" 24" 64-1/2" Painted Landscape Box for 5' Wide Trailers 242481 24" 24" 81-1/2" Painted Landscape Box for 6-1/2' Wide Trailers 242487 24" 24" 87-1/2" Painted Landscape Box for 7' Wide Trailers See Cargo Control Section for more Landscape & Trailer Accessories (Hooks, Racks, etc).

Aluminum Portable Ramps Capacity Description 1.5K Aluminum Bi-Fold Ramp 1K Aluminum Tri-Fold Ramp 1.5K Arched Pair Aluminum Ramps

Water Cooler Rack Part#

Ref #

Description

6080003

8500

Weldable Water Cooler Rack

WWW.TEXTRAIL.COM

H-13

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E RAMPS AND LIFT ASSISTS 7180005

7180030

BODY & FRAME

7180007

Part# 7180005 7180006 8600008 7180022 7180014 7180007 7180013 7180012 7180010 7180011 7180009 7180030

Ref # RA1548 RF1148 RF1160 RF2060 RF2096 RCH1587 RCH1596 RC1587 RT1472 RT1584 RFU1860 RFU1560

Width 15" 11" 11" 20" 20" 15" 15" 15" 14-1/2" 15" 18" 15"

Depth 3" 2" 2" 2" 2" 3" 3" 3" 2" 17"@Heel 3"

7180006

7180009

Length 48" 48" 60" 60" 96" 87" 96" 87" 72" 84" 60" 60"

Description Black Painted Angle Ramp with 1-1/2" Lip Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Formed Ramp Diamond Plate w/ Stiffeners Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Formed Ramp 1/8" Diamond Plate Black Painted Channel Ramp with Hooks Black Painted Channel Ramp with Hooks Black Painted Channel Ramp with Plate 1-1/2" Lip Black Painted Tube Ramp with 1-3/4" Lip Black Painted Tube Ramp with Plate Black Painted Heavy Duty Fold-Up Ramp Black Painted Fold-Up Channel Ramp with Adjustable Leg Double Barrel “Chain Driven” Trailer Gate Assist has a unique two spring design for extra power. Raise and lower your trailer tail gate with just one finger!! Shortest unit on the market, takes the least amount of railspace. Lowest price tail gate assist in its class. Reduces 134 pound gate to less then 5 pounds. 7180120

Part# 7180120

Ref # RA-27

Rail Space Description 10" - 15" Chain Driven Double Barrel Trailer Gate Assist

WWW.TEXTRAIL.COM

H-14

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E RAMP GATE ASSEMBLIES 7180019

7180018

Part# 7180015 7180056 7180018 7180019 7180017 7180023 7180055

Ref # Width RGA5038 50" RGA6039 60" RGA6051 60" RGA7751 77" RGA8351 83" RGA8351 83" RGA8365 83" Ref # 2134 8807 7818 66010 83910 781 771 14001 1808 5357 2595 CP1211 CP1251 CP2381 CP2382 CP2781 CP2116 CP2018 CP3316 RS375 RS437

Part# 7180020 7180059 7180118 7180060 7180019-02 7180119 7180019-03 7180054 7180016 7180061 7180038 7180117

Ref # RG5451 RG6027 RG6051 RG7727 RG7736 RG7751 RG7760 RG7765 RG7839 RG8327 RG8351 RG8351

Rampgate Pipe Hinge 6"L x 3/4"ID Round Bar 3/4" OD x 10" Long Rampgate Latch Bracket 3/16" x 2-1/2" x 2-1/2" Linch Pin 7/16" x 1-3/4" Long Yellow Zinc Plated Linch Pin 7/16" x 1-3/4" Long with 10" Lanyard Rampgate Pin with Threaded Shank 7/8" x 1-1/8" 9/16" x 1-1/2" Rubber Washer Gasket 1-3/8" OD x 1/8" Rampgate Brass Hinge 25/65" Pin 4" Long Rampgate Butt Hinge 0.207 x 2-1/2" x 2-1/2" 0.089 Gauge Rampgate Handle 3/16" x 1" x 8" Long Latch Assembly 1/2" Spring 3-7/8" Handle Length Zinc Plated Poly Cap Plug 1" X 2" Rectangular 1/16" Poly Cap Plug 1-1/4" x 1-3/4" Rectangular Poly Cap Plug 2-3/8" Round 1/16" Steel Cap Plug 2-3/8" Round 1/8" Poly Cap Plug 2-7/8" Round 1/16" Poly Cap Plug 2" Square x 1/16" Poly Cap Plug 2" Square x 1/8" Poly Cap Plug 3" Square x 3/16" Ramp Spring 3/8" Diam 14-1/4" Long Ramp Spring 7/16" Diam 15-1/2" Long

Width 54" 60" 60" 77" 77" 77" 77" 77" 78" 83" 83" 83"

Height 51" 27" 51" 27" 36" 51" 60" 65" 39" 27" 51" 51"

8530005

5350061

8530003

8530002

5350253

8600006

Replacement Ramp Gates Description Painted Rampgate Primed Rampgate Hinges Loose Primed Rampgate Hinges Loose Primed Rampgate Hinges Loose Painted Rampgate Primed Rampgate Hinges Loose Painted Rampgate Painted Rampgate Painted Rampgate Primed Rampgate Hinges Loose Painted Rampgate Primed Rampgate Hinges Loose

WWW.TEXTRAIL.COM

H-15

2010 Copyright by TexTrail, Inc.

BODY & FRAME

Part# 3670021 4000002 5350061 7300029 7300030 7300031 7300043 7400001 7400008 5350260 8200027 8530001 8530002 8530003 5350253 8530004 8530005 8530006 8530007 8600006 8600007

Height Description 38" Painted Rampgate Assembly 36" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly 51" Painted Rampgate Assembly with Integrated Ramps 65" Painted Rampgate Assembly Ramp & Ramp Gate Assembly Installation Components Description


B O DY & F R A M E Part# 7180025

Ref # TTFURK

Quantity 1

3700001 5350092 5350216 5350219 5350253 5350345 5350346 7030091 8600006

2111 42125 81625 38678 CP2382 11195 11325 64315 RS375

1 1 2 2 2 1 1 2 1

8200034

Part# 8200034 8200033 8200003 8200004 8200005 8200027 8200001 8200099

BODY & FRAME

Part# 9250097 9250096 Part# 7180085 7180086 7180150 7180151 7180152 7180153 Part# 7030171 7030172 7030173 7030174 7030175 7030176 7030177 7030178 7030180 7030181 7030179 7030191 7030192 7030193 7030194 7030195 7030196 7030197

8200033

Ramp & Ramp Gate Assembly Installation Components Description Fold-Up Ramp Hardware Kit Consisting of the following items: Rotator Pipe 1-1/2" Diam x 14-1/4" Long Tailboard Center Link 3/8" x 2-1/8" x 4" Long Tailboard Fixed Link 3/8" x 3" x 8" Long Tailboard Rotating Link 3/8" x 6-7/8" x 9" Long Cap Plug 2-3/8" Round 1/8" Ramp Rod 19-1/2" Long Ramp Rod 32-1/2" Long Roll Pin 3/8" x 2" Long Zinc Plated Ramp Spring 3/8" Diam 14-1/4" Long 8200003

8200004

8200005

8200099

Latches & Stake Components Description Paddle Handle Tipper Latch Assembly Zinc Plated Weldable Spring Loaded Center Pop-Up Latch 4-Piece Stake Corner Security Latch Set 4-Piece Straight Security Latch Set 4-Piece Rack Corner Connector Set 1/2" Spring Latch Assembly 3-7/8" Handle Length Zinc Plated 1/2" Spring Latch Assembly with Keeper 1/2" Spring Latch Assembly without Keeper 6-1/2" X 1-9/16"Wide Zinc Plated 1-1/2" x 3" Load Plate Stake Pocket Ref # Width Depth Height Gauge Description STK02 3-1/2" 1-1/2" 3" 4 Stake Pocket STK01 3-1/2" 1-1/2" 3" 8 Stake Pocket Ramp Springs - 90° Leg Position Ref # Description SB0230 1-1/2" Max Shaft LH Ramp Spring 0.375 Wire SB0230R 1-1/2” Max Shaft RH Ramp Spring 0.375 Wire 7180085 7180153 Ramp Springs - 180° Leg Position RS112L 1-1/2" Max Shaft LH Ramp Spring 0.468 Wire RS112R 1-1/2" Max Shaft RH Ramp Spring 0.468 Wire RS200L 2" Max Shaft LH Ramp Spring 0.500 Wire 7180150 7180152 RS200R 2" Max Shaft RH Ramp Spring 0.500 Wire Drill Bits Ref # Type Diam. Length Twist Description 18JDB Jobber 1/8" 2-3/4" 1-5/8" Drill Bit 532JDB Jobber 5/32" 3-1/8" 2" Drill Bit 1164JDB Jobber 11/64" 3-1/4" 2-1/8" Drill Bit 316JDB Jobber 3/16" 3-1/2" 2-5/16" Drill Bit 1364JDB Jobber 13/64" 3-5/8" 2-7/16" Drill Bit 732JDB Jobber 7/32" 3-3/4" 2-1/2" Drill Bit 14JDB Jobber 1/4" 4" 2-3/4" Drill Bit 38JDB Jobber 3/8" 5" 3-5/8" Drill Bit 532NDB Nitro 5/32" 2-1/16" 1" Drill Bit 316NDB Nitro 3/16" 2-3/16" 1-1/8" Drill Bit 38NDB Nitro 3/8" 3-1/8" 1-13/16" Drill Bit 18SDB Stubby 1/8" 1-7/8" 7/8" Drill Bit 964SDB Stubby 9/64" 1-15/16" 15/16" Drill Bit 532SDB Stubby 5/32" 2-3/16" 1" Drill Bit 1164SDB Stubby 11/64" 2-1/8" 1-1/16" Drill Bit 316SDB Stubby 3/16" 2-3/16" 1-1/8" Drill Bit 1364SDB Stubby 13/64 2-1/4" 1-3/16" Drill Bit 732SDB Stubby 7/32" 2-3/8" 1-1/4" Drill Bit Ref # 5240 2598 2589 2588 2591 2595 2595 2575

WWW.TEXTRAIL.COM

H-16

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E TRAILER/TRUCK BOXES

9450500

Part# 9450580 9450581 9450582 9450583 9450585 9450586 9450587 9450588

Ref # UB151015R UB151024R UB151515R UB151524R UB151530R UB151536R UB151548R UB181824R UB181830R UB181836R UB181848R UB151015T UB151024T UB151515T UB151524T UB151530T UB151536T UB151548T UB181824T UBW181824T UB181830T UB181836T UBW181836T UB181848T UBW181848T UBDD151573T

Ref #

Type Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody

ALUB181836T

Type Underbody Underbody Underbody Underbody Underbody Underbody Underbody Underbody

Part#

Ref #

Description

9450650

UBB15

15" Underbody Box Bracket

9450651

UBB18

18" Underbody Box Bracket

Part# 9450603 9450704

Ref #

ALUB181818R ALUB181824R ALUB181830R ALUB181836R ALUB181818T ALUB181824T ALUB181830T

ALTGBX PCTGBX

Type Tongue Tongue

Handle SS Paddle SS Paddle

WWW.TEXTRAIL.COM

9450565

Width 15" 24" 15" 24" 30" 36" 48" 24" 30" 36" 48" 15" 24" 15" 24" 30" 36" 48" 24" 24" 30" 36" 36" 48" 48" 73"

Description Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box Black Truck Tack Box White Truck Tack Box Black Truck Tack Box Black Truck Tack Box White Truck Tack Box Black Truck Tack Box White Truck Tack Box White Truck Tack Double Door Box

Width 18" 24" 30" 36" 18" 24" 30" 36"

Description Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box Flush Lid Mill Finished Aluminum Box

Width 20" 20"

Description Tongue Box Aluminum 33"W in Back Tongue Box Black Steel 33"W in Back

9450603

14-Gauge Tongue Boxes Finish Height Depth Aluminum 21" 16" Powder Coat 20" 16"

H-17

2010 Copyright by TexTrail, Inc.

BODY & FRAME

Part# 9450500 9450501 9450502 9450503 9450504 9450505 9450506 9450507 9450508 9450509 9450510 9450550 9450551 9450552 9450553 9450554 9450555 9450556 9450557 9450558 9450559 9450560 9450561 9450562 9450563 9450565

9450501

14-Gauge Steel Underbody Box Handle Finish Height Depth SS Rotary Powder Coat 15" 10" SS Rotary Powder Coat 15" 10" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 15" 15" SS Rotary Powder Coat 18" 18" SS Rotary Powder Coat 18" 18" SS Rotary Powder Coat 18" 18" SS Rotary Powder Coat 18" 18" SS T-Handle Powder Coat 15" 10" SS T-Handle Powder Coat 15" 10" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 15" 15" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 18" 18" SS T-Handle Powder Coat 15" 15" Aluminum Underbody Box Handle Finish Height Depth SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS Rotary Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" SS T-Handle Aluminum 18" 18" Underbody Box Mounting Brackets


B O DY & F R A M E TRAILER/TRUCK BOXES CONTINUED

9450700

Part# 9450700 9450701 9450702 9450703

Ref # PCACRSB PCTMSB PCGBX PCGBX

Type Across Bed Specialty Specialty Specialty

Handle SS Paddle SS Paddle SS Paddle SS Paddle

9450600

Part# 9450600 9450601 9450602

Ref # STOW RKMTAB

Type Specialty Specialty Specialty

14-Gauge Steel Specialty Boxes Finish Height Depth Width Powder Coat 18" 25-1/2" 68-1/2" Powder Coat 8" 20" 60" Powder Coat 13" 14-1/2" 36" Powder Coat 13" 14-1/2" 48"

9450703

Description Black Steel Across The Bed Box Black Steel Top Mount Shovel Box Black Steel Lightweight Gear Box Black Steel Lightweight Gear Box

9450602

Handle SS Paddle SS Paddle SS Paddle

6450601

Aluminum Specialty Boxes Finish Height Depth Width Description Aluminum 17" 20" 48" Stowaway Box Aluminum 13" 12" 36" Rack Mount Aluminum All Terrain Box Aluminum 8" 12" 36" Rack Mount Aluminum All Terrain Box

BODY & FRAME

RKMTAB

9450702

9450701

9450098

Part# 9450098 9450097 9450099 9450096

Ref # TST21TTB TST21TTBBK TST16TTB TST16TTBBK

Type Tongue Tongue Tongue Tongue

Handle SS Paddle SS Paddle SS Paddle SS Paddle

22-Gauge Steel Tongue Boxes Finish Height Depth Powder Coat 23" 15" Powder Coat 23" 15" Powder Coat 18-3/4" 19" Powder Coat 18-3/4" 19"

9450160

Part# 9450160 9450161

9450096

9450099

Width 21" 21" 16" 16"

Description White Tradesman Tongue Box 34"W in Back Black Tradesman Tongue Box 34"W in Back White Tradesman Tongue Box 34"W in Back Black Tradesman Tongue Box 34"W in Back

9450161

Ref # TALVST50 TALVST50BK

Type Vertical Vertical

Handle 50 Gallon 50 Gallon

WWW.TEXTRAIL.COM

Liquid Storage Tanks Finish Height Depth Aluminum 19" 14" Aluminum 19" 14" H-18

Width Description 64" Brite Finish Tradesman Liquid Storage Tank 64" Black Tradesman Liquid Storage Tank 2010 Copyright by TexTrail, Inc.


B O DY & F R A M E Ref # DTR5012 DTR7018 DTR6518 DTR7518 DTR6014 DTR6515 DTR7012 DTR7015 DTR7515 DTR8022

Type Mesh Mesh Mesh Mesh Mesh Mesh Mesh Mesh Mesh Mesh

Width 5' 7’ 6.5’ 7.5’ 6' 6-1/2' 7' 7' 7-1/2' 8'

Part# 6900206 6900164 6900142 6900138 6900204 6900207 6900205

Ref # 3011034 n/a 3008210 3009456 3009455 3011036 3009892

Type Mesh Mesh Mesh Mesh Mesh Mesh Mesh

Width 5' 6.5’ 7’ 7’ 6' 7' 8'

Part# 9250321 9250322 9250323 9250118 9250324 9250119

Ref # RTS9 RTS15 RTS21 RTS21H RTS31 RTS31H

Type Rubber Rubber Rubber Rubber Rubber Rubber

Length 9" 15" 21" 21" 31" 31"

Please Call Your Local TexTrail Trailer Parts Representative For Hoist Replacement Parts

6900078

Part# 6900078 6900075 6900072 6900069 6900061 6900137

Ref # PH-310 PH-416 PH-516 PH-625 PH-630 PH-520

Part#

Ref #

6900153 6900154 6900155

BODY & FRAME

Part# 6900203 6900143 6900144 6900134 6900201 6900210 6900202 6900209 6900211 6900200

Dump Tarp Kits Length Hardware Description 12' Included Dump Tarp & Hardware Kit 18’ Included Dump Tarp & Hardware Kit 18’ Included Dump Tarp & Hardware Kit 18’ Included Dump Tarp & Hardware Kit 14' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 12' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 15' Included Dump Tarp & Hardware Kit 22' Included Dump Tarp & Hardware Kit Replacement Dump Tarps Length Description 12' Dump Tarp Only 15’ Dump Tarp Only 15’ Dump Tarp Only 18’ Dump Tarp Only 14' Dump Tarp Only 12' Dump Tarp Only 22' Dump Tarp Only Dump Tarp Straps Description Tarp Strap Tarp Strap Tarp Strap Heavy Duty Tarp Strap Tarp Strap Heavy Duty Tarp Strap

Hydraulic Hoist Kits Description Hoist Kit with Hinges & Prop Assy - TB-8 Hoist Kit with Hinges & Prop Assy - TB-10 Hoist Kit with Scissor Lift, Hinges & Prop Assy - TB-12 Hoist Kit with Hinges & Prop Assy - TB-18 Hoist Kit with Scissor Lift, Hinges & Prop Assy - TB20 Hoist Kit with Scissor Lift, Hinges & Prop Assy T- B14 Hydraulic Hoist Power Units Use With Description

DC-4675

TB-8,TB-10,TB12,TB-16

DC-4679

TB-16,TB18,TB-20

dc4676

TB-8,TB-10,TB12,TB-16,TB16,18,TB-20

6900155

PSI

Pump

Reservoir

Hydraulic Single Acting 12VDC Dump Trailer Pump

3200

Single

8-QT Poly Offset

Hydraulic Single Acting 12VDC Dump Trailer Pump

3200

Single

16-QT Poly Offset

Hydraulic DoubleActing 12VDC Dump Trailer Pump

3200

Double

8-QT Poly Offset

WWW.TEXTRAIL.COM

H-19

2010 Copyright by TexTrail, Inc.


B O DY & F R A M E

Trailer Tarp Kits

BODY & FRAME

• Heavy-duty double stitch hem. • All hems reinforced with nylon webbing • Full perimeter brass grommets • Cast bearings and zinc plated hardware • Extruded aluminum cross bars telescope exact bed width of dumps & trailers up to 102” wide. • Folding crank handle with detent latch. • 22’ pull rope included

6900153

Call TexTrail for your hydraulic pumps or a full line of replacement dump parts.

6900154

6900155

WWW.TEXTRAIL.COM

H-20

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S

HARDWARE & LOCKS

Table Of Contents - Hardware & Locks Back-Up Assist Camera Bar Lock Assembly Bumpers Butt Hinge Butterfly Latch Cab Lock Handles Cab Slam Locks Cam Lock Assembly Cap Plugs Catch / Pull Latch Chains Continuous Hinges Dead Bolt Flush Latch Door Holdbacks Door Holders Drill Bits D-Rings "D" Bumpers Flush Latches Flush Mount Hinges Handles (Cab Lock) Handles (Grab) Hasp Hinge Pin Hinges Hitch Pins Hood Latch Hooks Latches Linch Pins Links Locks Paddle Latches Pins (Hitch, Linch & Snapper) Receiver Hitch Pins Receiver Locks Rivets & Rivet Tools Rope Rings Rubber Bumpers Safety Chains Slam Locks Snapper Pins Spare Tire Carrier / Mount Spring Loaded Latches Stake Components Stake Pocket Steps (Folding & Weld-On) Strap Hinges Suitcase Latch T-Handle Latches Tie Loops Tipper Latch Torx速 Head Self Tapping Floor Screws Torx速 Screw Bits & Holder Towing Mirror WWW.TEXTRAIL.COM

J-1

J-12 J-5 J-11 J-3 J-9 J-5 J-5 J-5 J-11 J-9 J-17 J-3 J-4 J-6 J-6 J-11 J-7 J-11 J-4 J-3 J-5 J-2 J-5 J-3 J-2 J-8 J-4 J-8 J-4 & J-9 J-9 J-8 J-12 J-4 J-8 & J-9 J-8 J-12 J-10 J-7 J-11 J-18 J-5 J-9 J-2 J-9 J-11 J-10 J-2 J-3 J-9 J-4 J-9 J-9 J-10 J-10 J-2 2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S Towing Mirror Part#

Ref #

Description

8850200

3096

X-Large Clip-On Towing Mirror Grab Handles & Steps

Part# 7300208 7300205 5350719 5350605 5430095

Ref # 875SS GHC213 GHM385 GHM7165 27818

Description Stainless Steel Folding Step Pad 2-3/16" x 4-3/8" Bolt-On Steel Chrome Plated Grab Handle 1/2" Dia. x 13" Weld-On Metal Grab Handle 3/8" Dia. x 5" Weld-On Metal Grab Handle 7/16" Dia. x 5" Weld-On Painted Steel Trailer Bed Step 12"W x 18"H x 5"D

7300208

5430095

7300205

Spare Tire Carriers Part# 8900009-01 8900010-01 8900003 8900002 8900004

Ref # 6220 6280 HDSTC STC100 TTSTC100

Description Spare Tire Carrier Kit 4 & 5 Hole Wheels without Bracket Padlock Spare Tire Carrier Kit 4 & 5 Hole Wheels with Bracket Padlock Spare Tire Carrier Kit 3 x 5 Tongue 4-3/4" Lift 7" Offset with Hardware Spare Tire Carrier Kit 3 x 4 Tongue 4-3/4" Lift 7" Offset Spare Tire Carrier Kit Weld-On 4& 5 Hole Wheels

Finish Zinc Zinc Zinc Zinc Painted

Hardware Included Included Included Included Included

HARDWARE & LOCKS

8900009-01

890010-01

8900002

8900003

8900004

Locks Part# 8200158 8200177-01 8200185 8200141 8200096

Ref # UMAX50 TTRL583 DL-80 3DAT TL-45

Description Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers 5/8" x 4-1/2" Locking Hitch & Coupler Pin Set - Keyed Alike Cam Lockrod Door Lock & Keeper - Keyed Alike Laminated Steel Master lock Padlock 1-9/16" Wide Heavy Duty Shielded Padlock 2-3/4" Diameter * More locks on page J-12 *

8200173

8200177-01 8200185

8200141

WWW.TEXTRAIL.COM

J-2

8200096

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S Strap & Flush Mount Hinges Part# 7400028 7400147 7400021 7402212 7402512 7402008 7404022

Ref # 104 1002 1003 2212 2512 2008 4022

7400028

Part# 7400051

Description Chrome Cast Flush Mount Hinge with 5/16" Stainless Steel Pin 3-1/4"W x 6" L Chrome Cast Flush Mount Hinge with 1/2" Zinc Steel Pin 3-1/4"W x 4-9/16" L Removable Pin - Left Hand Chrome Cast Flush Mount Hinge with 1/2" Zinc Steel Pin 3-1/4"W x 4-9/16" L Removable Pin - Right Hand Zinc Plated Strap Hinge with 1/2" Stainless Steel Pin 12" L over Gasket 270째 Zinc Plated Strap Hinge with 1/2" Stainless Steel Pin 12" L over Gasket 180째 Zinc Plated Strap Hinge with 8-31/32" L from Pin to End with 3-Hole Bracket 10-1/4" Overall Length Zinc Plated Flush Mount Strap Hinge with 1-3/4" W Strap x 12" L over Gasket 270째

7400147

Ref # A1808

OAW 2-1/4"

7402008

7402212

Strap Hinge with Grease Fitting OAL OAH Gauge 3-9/32" 2-1/2" 0.307"

7402512

7404022

Description Heavy Duty Strap Hinge

HARDWARE & LOCKS

7400011

Part# 7400007 7400008 7400014 7400016 7400018

Ref # A1808 B1808 C1808 E1808 124

Size

Pin

Gauge

2" x 2"

3/16" 3/16" 7/32" 9/32" 1/8"

0.082" 0.089" 0.092" 0.130"

2-1/2" x 2-1/2"

3" x 3" 4" x 4" 4" x 4"

Cold-Rolled Steel Cold-Rolled Steel Cold-Rolled Steel Cold-Rolled Steel Stainless Steel

Description Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes Butt Hinge - No Holes

Fixed Steel Hinge Pin with Grease Zerk Part# 7300003

Part# 7400033 7400002 7400005 7400009 7400017 7400015

Ref # W400

Ref #

Description 2-Piece Weld-On Steel Pin with Brass Grease Fitting 4-1/2" Overall Length x 3/4" Dia Body x 1/2" Dia Pin

Finish

SS51515 Stainless Steel S41 14-GA Steel A473 11-GA Steel S43 14-GA Steel S50 14-GA Steel A317-1 14-GA Steel

6' Continuous Hinge - No Holes Open Width Pin Gauge 1-1/2" 1-1/2" 2" 2-1/2" 3" 3-1/2"

WWW.TEXTRAIL.COM

1/8" 3/16" 3/8" 3/16" 1/4" 1/4"

J-3

Knuckle

0.050" 0.075"

0.500 1.000

0.075" 0.075"

1.000 1.000 1.000

Description Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge Continuous Hinge

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S

8200136

Part# 8200038 8200037 8200239 8200036 8200240 8200136 8200245 8200264 8200265 8200030 8200031 8200242 8200025 8200243 8200064

8200038

8200036

Ref # L9015 N9015 R9015 S9015 T9015 T2600 T1100 T600 T2800 L9018 N9018 K510 K545 L625 39LC

Finish Plain Plain Plain Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel

Plain Plain

Type Junior Junior Junior Junior Junior T-Handle T-Handle T-Handle T-Handle Large Large

Flush Latches Hole Size 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-5/8" x 3-11/16" 2-7/8" x 3-5/8" 2-7/8" x 3-5/8" 2-3/8" x 3-1/8" 3-1/8" x 4-7/16" 3-1/8" x 4-7/16" 3-1/8" x 4-7/16"

8200243

7500140

8200042

7500142

Chrome Flush Mount Dead Bolt & Locking Paddle Latch Part# Ref # Description 7500140 13631 Outer Dead Bolt / Paddle Latch 7500142 14901 Outer Locking Paddle Latch 7500141 11706 Inner Dead Bolt for 7500140 7500143 10953 Inner Latch Flat Plate Hood Latches Part# Ref # Description 8200002 WJ96 Spring Loaded Pivot Hood Latch - Black Finish 8200035 WJ94 Spring Loaded Pivot Hood Latch - Chrome Plated 8200016 WJ91 Straight Hood Latch - Stainless Steel 8200182 WJ99 Catch Plate - Black Finish 7300073 WJ93 Catch Plate - Chrome Plated 8200015 WJ90 Catch Plate - Stainless Steel 8200042 35R Rubber Hood Latch with Zinc Hardware

WWW.TEXTRAIL.COM

J-4

2010 Copyright by TexTrail, Inc.

HARDWARE & LOCKS

8200016

8200265

Description Locking Paddle Latch Non-Locking Paddle Latch Locking Inside Release Paddle Latch Locking Paddle Latch Locking Inside Release Paddle Latch Locking T-Handle Latch Single Point Folding Locking T-Handle Latch Double Point Folding Locking T-Handle Latch Truck Bed / Tool Box Locking T-Handle Latch Truck Bed / Tool Box Locking Paddle Latch Non-Locking Paddle Latch Replacement Key Only for 510 Lock Replacement Key Only for 545 Lock Replacement K545 Key & Tumbler for Jr Paddle Latch Replacement LL71 Key & Tumbler for Jr Paddle Latch

7500141

7500140

8200002

8200030


H A R D WA R E & LO C K S

Side Door Bar Lock Assembly Part# 7300004

Ref # 15736

Description 36" x 18" Bar Lock Assembly (includes Welded Bar Lock Assembly, Hasp Keeper, & PVC Handle Grip) Universal Cam-Door Lock Assembly

Part# 8200068 8200061 8200129 8200188 8200108 8200022 8200183 8200128 7300075

Ref # 470 401 158202 158207 100 101 158202 158203 100C

Description Cam Door Lock Kit 3/4"ID Aluminum Shaft (excludes pipe) Cam Door Lock Kit 3/4"ID Zinc Shaft (excludes pipe) Replacement Top Keeper Zinc Replacement Top Lug Zinc Replacement Handle for Cam Door Lock Kit* Zinc Replacement Riveted Hasp Assembly 1-Piece Zinc Replacement Bottom Lug Zinc Replacement Bottom Keeper Zinc Replacement Rubber Grip for Handle

8200061

8200068

8200007

58LH

Left Hand Cab Slam Latch

Zinc

2”

3-3/8”

8200006

58RH

Right Hand Cab Slam Latch

Zinc

2”

3-3/8”

Cab Locks can be used with the 1/4”‘L’ or ‘T’ handles.

Hasp Part# 8200066 8200021 8200022 8200029 8200215

Ref # 30314 32 101 295 8025

Description Hasp & Staple Riveted Pin 3-1/4" x 1-1/2" Zinc Hasp & Swivel Staple 3" Zinc CAM Lock Hasp 1-Piece Riveted Zinc Hasp & Staple Kit 7-Piece Zinc Hockey Puck Internal Shackle Hasp 2-Piece Chrome WWW.TEXTRAIL.COM

J-5

8200066 8200029

8200022 8200021

8200215

2010 Copyright by TexTrail, Inc.

HARDWARE & LOCKS

*Includes Rubber Grip To order replacement parts for the 8200068 Aluminum CAM Lock please notify your sales representative. Cab Lock Handles Part# Ref # Description 8200130 276 Locking Handle 1/4" "L" Shaft with Lock & Keys 8200135 277 Non-Locking Handle 1/4" "L" Shaft 8200133 777 Locking Handle 1/4" "T" Shaft with Lock & Keys 8200133 8200135 8200130 7500148 7500148 11369 Locking Cargo Handle 1/2" "L" Shaft with Lock & Keys 8200266 81820 Door Handle Cam Surface Mounted Cab / Slam Locks Part# Ref # Description Finish Width Height These surface-mounted


H A R D WA R E & LO C K S

7500155-02

7500154

7500153

7500156

7500146

7500190

7500145

7300085 / 7300078

7300201

7300206

7500203

7500155

7500144

7300200 / 7500029

7500150 7300005 7500149

7300038

HARDWARE & LOCKS

Door Holders & Hold-Backs Part# 7500144 7300201 7300202 7300203 7300204 7300085 7300078 7300206 7300207 7500155-02 7500153 7500154 7500155 7500156 7500145 7500146 7500190 7300005 7300038 7500149 7300200 7500029 7500150

Ref # 38R DHS DH1 39R DH2 ADH2 ADH4 DH100 DH101 ADHR2 600 604SS 605SS 606SS 294 296 2910 602 60202 603SS 603 PH8ZN P1016

Size 1" 1" 2" 2" 2" 4" 2-9/16" 2-1/2" 1-11/32" 1-1/2" 2-1/2" 3-1/2" 4" 6" 10" 2" 4" 4" 4" 6"

WWW.TEXTRAIL.COM

Door Holder Plastic Stem with Rubber Socket Door Holder Rubber Socket for 1" or 2" Long Plastic Door Stem Door Holder Plastic Stem Only for 7300201 Door Holder Plastic Stem with Rubber Socket Door Holder Plastic Stem Only for 7300201 Spring Loaded Catch & Door Holder 2-Piece Aluminum Spring Loaded Catch & Door Holder 2-Piece Aluminum Door Holder with Rubber Insert Socket Zinc Rubber Insert Only For 7300206 Socket Door Holder Stem Aluminum with Rubber Cap Door Holder White Nylon Socket White 0.090" Thick Door Holder Stem Only Stainless Steel Door Holder Stem Only Stainless Steel Door Holder Stem Only Stainless Steel Door Holder Plastic Stem with Female Receiver Door Holder Plastic Stem with Female Receiver Door Holder Plastic Stem with Female Receiver 90째 Wire Door Holder with Female Receiver Zinc 45째 Wire Door Holder with Female Receiver Zinc T-Wire Door Holder with Spring Loaded Female Receiver Stainless Steel T-Wire Door Holder with Female Receiver Zinc T-Wire Door Holder with Female Receiver Zinc Base for Wire Door Holders & Receivers J-6

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S Tie Loops Part#

Ref #

Description

Diameter

I.D.

Style

Application

7500157

TLA122

Tie Loop - Aluminum

1/2"

2"

Round

Bolt-On

8850009

TL12R

Tie Loop - Metal

1/2"

2"

Round

Weld-On

5350715

TLM3812

Tie Loop - Metal

3/8"

1/2"

Bent

Weld-On

5350147

TLM7161

Tie Loop - Metal

7/16"

1"

Bent

Weld-On

5350146

TLM121

Tie Loop - Metal

1/2"

1-1/2"

Bent

Weld-On

5350716

TLM3821

Tie Loop - Metal

3/8"

2-1/4"

Square

Weld-On

5350222

TLM3811

Tie Loop - Motor Cycle Tie Down

3/8"

1-1/4"

Bent

Weld-On

8850109

TLM382

Tie Loop - Metal

3/8"

2"

Bent

Weld-On

5350719

GHM385

Grab Handle - Metal

3/8"

5"

Square

Weld-On

5350605

GHM7165 Grab Handle - Metal

7/16"

5"

Square

Weld-On

5350605

5350719

5350716

8850009

8850109 5350715

7500157

5350147

5350146

5350222

D-Rings & Rope Ring Ref #

Description

7500158

TL178AB

9250089

B20

Rope Ring - 1/4" dia. steel zinc.

800 LB

9250088

B601

Rope Ring - 3/8" dia. steel zinc. Recessed 3" hole

285 LB

9250087

B703

Rope Ring - 1/4" dia. steel zinc w/bazel

800 LB

9250019

DR-12W

D-Ring - 1/2" dia. steel w/ weld-on bracket 12K UBS*

4080 LB

9250035

DR-12B

D-Ring - 1/2" dia. zinc w/ bolt-on bracket 12K UBS*

4080 LB

9250036

DR-58W

D-Ring - 5/8" dia. steel w/ weld-on bracket 19K UBS*

6K

9250016-02

J707

D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS* USA

15.5K

9250016

B48

D-Ring - 1" dia. steel weld-on 3x4 46,760K UBS*

2K

9250034

B801A

Rope Ring - Recessed Zinc 3-5/8" hole 6K USB*

2K

9250033

B901

Rope Ring - Recessed Zinc 360째 Rotating 6K USB*

2K

Safe Working Load

Rope Ring - 7/16" dia. Aluminum bolt-on with bracket

1K

7500158 9250089

9250088

9250087

9250034

*Ultimate Breaking Strength 9250035

9250036

9250019

9250016-02 9250033

WWW.TEXTRAIL.COM

J-7

2010 Copyright by TexTrail, Inc.

HARDWARE & LOCKS

Part#


H A R D WA R E & LO C K S Grab & Slip Hooks Part# Ref # Description 8850072 GH14 1/4" Grab Hook 7,800 UBS* 8850073 GH516 5/16" Grab Hook 11,700 UBS* 8850074 GH38 3/8" Grab Hook 16,200 LB UBS* 8850097 SH14 1/4" Slip Hook w/ Latch 7,800 UBS* 8850017 SH516 5/16" Slip Hook w/ Latch 11,700 UBS* 8850016 SH38 3/8" Slip Hook w/ Latch 16,200 LB UBS* *Ultimate Breaking Strength Hooks & Links Part# Ref # Description 8850090 162S Snap Hook - Double-End 3-1/2" x 5/8" 8850091 225 Snap Hook - Swivel 3-1/2" x 5/8" 8850092 231 Snap Hook - Open End 3-1/2" x 3/8" 7300045 316QL Quick Link - 3/16" 616 LB UBS* 9250401 516QL Quick Link - 5/16" 1540 LB UBS* 9250012 38QL Quick Link - 3/8" 1900 LB UBS* 9250403 12QL Quick Link - 1/2" 2650 LB UBS* 9250400 14QL Quick Link - 1/4” 3500 LB UBS* 9250368 516SL Chain Spring Link 5/16” Zinc 350LBS WWL 9250369 38SL Chain Spring Link 3/8” Zinc 425LBS WWL 8850105 316S S Hook 3/16” 350LB Zinc 8850106 14S S Hook 1/4” 567LB Zinc 8850018 716S S Hook - 7-16" 5K 8850019 716SC S Hook - 7-16" 5K w/ Catch 8200146 1270 Spring Link - Bulk 100 pk *Ultimate Breaking Strength

Safe Working Load 2,600 LB 3,900 LB 16,200 LB 7,800 LB 11,700 LB 16,200 LB

Grade G43 G43 G43 G43 G43 G43 GRAB

8850090

8850091

SLIP

8850092

SPRING

QUICK

Hitch Pins

HARDWARE & LOCKS

Part#

Ref #

Finish

Size

Description

7350209

F-4

Zinc

1/2"

105° Bent Receiver Pin 2-5/8" Long with Retaining Clip

7350315

F-5

Zinc

5/8"

105° Bent Receiver Pin 3" Long with Retaining Clip

7350062

F-6

Zinc

5/32"

Retaining Clip 3" Long for 1/2" - 5/8" Hitch Pins

7350264

211HP

Zinc

1/8"

Retaining Clip 2-5/8" Long for 1/2" - 5/8" Hitch Pins

8200354

2866DAT

Chrome

1/2” or5/8"

7350314

F-500

Zinc

5/8"

105° Bent Receiver Pin with Retaining Clip for 2-1/2" Receiver Tubes

7300002

66100

Zinc

1/2"

Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 4-1/4" Long with Retaining Clip

1/2” or 5/8” Receiver Lock Chrome Bent Pin Class III-V 3-5/8”L

7300013

66105

Zinc

5/8"

Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip

7300066

66110

Zinc

3/4"

Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 4-1/4" Long with Retaining Clip

7300014

66115

Zinc

3/4"

Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip

7300015

66125

Zinc

1"

Forged Steel Yellow Zinc Plated Spring Wire Handle Hitch Pin 6-1/4" Long with Retaining Clip

7350314

7300002

8200354

Packaged Hitch Pins Part#

Ref #

Finish

Size

Description

7350209-01

TTRP120

Zinc

1/2"

105° Bent Receiver Pin with Retaining Clip

7350315-01

TTRP583

Zinc

5/8"

105° Bent Receiver Pin with Retaining Clip

7350315-01

WWW.TEXTRAIL.COM

7350209-01

J-8

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S

Part# 6750144 6750141 6750148 6750143 6750142 6750140 6750120 6750145 6750139

Ref # 66045 66050 66063 66066 66070 66053 25201 66056 66060

Part# 7300034 7300036 7300022 7300023 7300037 7300029 7300035 7300030

Ref # 66003 66000 66007 66008 66006 66010 66015 66017

Part# 8200289

Part# 5553

8200033

A 1-13/16" 2" 2-3/4" 3-1/4" 3-3/4" 2-3/4" 2-3/4" 1-5/8" 2-1/2"

B 1-5/8" 1-13/16" 2-1/2" 3" 3-5/8" 2-7/16" 2-1/2" 1-1/2" 2-5/16"

C 1-9/16" 1-1/2" 2-1/2" 1-1/2" 1-1/2" 1-3/4" 2" 1-1/2" 2-5/16"

Length 30”

8200099

8200330

Spring & Tipper Latches Part# 8200034 8200033 8200099 Part# 8200111 Width 1” Part# 8200008

Ref # 5240 2598 2575

Description Paddle Handle Tipper Latch Assembly Zinc 5/8" Spring Loaded Center Pop-Up Latch Assembly 1/2” Spring Loaded Latch Assembly Zinc 1-1/2” x 3” Load Plate 6-1/2” Overall Length x 1-9/16” Wide

“Suitcase” Latch Ref# Description 207 Catch/Pull Down Latch Kit - Zinc Length Catch Width 3-13/16” 1/2” Toggle Action “Suitcase” Latch Ref# Description 801 Catch/Pull Down Toggle Action Latch Zinc - No Striker / Catch WWW.TEXTRAIL.COM

J-9

8200008

8200111

2010 Copyright by TexTrail, Inc.

HARDWARE & LOCKS

8200034

Snapper Pins Description Square 3/16" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" Yellow Zinc Snapper Pin Square 1/4" x 3-3/4" Snapper Pin Square 5/16" x 2-25/32" Snapper Pin Round 5/16" x 2-3/4" Snapper Pin with Chain Square 3/8" x 1-5/8" Snapper Pin Square 3/8" x 2-1/2" Snapper Pin Linch Pins Description 3/16" x 1-3/8" Yellow Zinc Linch Pin 1/4" x 1-3/4" Yellow Zinc Linch Pin 5/16" x 1-3/4" Yellow Zinc Linch Pin 5/16" x 3" Yellow Zinc Linch Pin with Chain 3/8" x 2-11/32" Yellow Zinc Linch Pin 7/16" x 1-3/4" Yellow Zinc Linch Pin 7/16" x 2" Yellow Zinc Linch Pin 7/16" x 1-3/4" Yellow Zinc Linch Pin with 10" Lanyard Butterfly Latch Description 1/4” x 1-1/2” Steel Butterfly Strap with Grips


H A R D WA R E & LO C K S Torx® Screwdriver Bit and Holder Size Description Screw Bit Holder for Torx® Driver 1/4" Drive 1/4" Torx® Hex Screw Bit for 3/16" Drive 1/4" Torx® Hex Screw Bit for 1/4" Drive 5/16" Torx® Hex Screw Bit for 1/4" Drive Torx® Head Floor Screws Part# Ref # Size Length Description 7030063 1420100 1/4"-20 1" Self Tapping Torx® Head Screw 7030057 1420150 1/4"-20 1-1/2" Self Tapping Torx® Head Screw 7030053 1420200 1/4"-20 2" Self Tapping Torx® Head Screw 7030058 1420225 1/4"-20 2-1/4" Self Tapping Torx® Head Screw 7030170 1420250 1/4"-20 2-1/2" Self Tapping Torx® Head Screw 7030059 1420300 1/4"-20 3" Self Tapping Torx® Head Screw 7030060 5160250 5/16"-18 2-1/2" Self Tapping Torx® Head Screw 7030061 5160300 5/16"-18 3" Self Tapping Torx® Head Screw Rivets and Rivet Guns For use on copper, brass, tin, lead, steel, aluminum, pewter and zinc—virtually any material! Rivets won't easily rust or corrode or come loose. Kit includes heavy-duty rivet gun, powerful enough to do jobs fast. Gun has non-rust zinc alloy die-cast body with strong drop-forged handles and rubberized grips. Chain lock keeps handles closed. Durable fulcrum pin. Also included are 4 speciallyhardened nosepieces for 3/32", 1/8", 5/32" and 3/16" diameter rivets. Nosepieces store in gun. Easy-to-handle gun weighs less than 1-1/2 lbs Part# Ref # Diameter Hole Size Drill Hole Length Grip 7030316 AA42D 1/8" .129-.133 9/64" 0.265 .032-.125 7030315 AA44D 1/8" .129-.133 9/64" 0.390 .188-.250 7030314 AA45D 1/8" .129-.133 9/64" 0.515 .251-.312 7030313 AA46D 1/8" .129-.133 9/64" 0.515 .313-.375 7030312 AA48D 1/8" .129-.133 9/64" 0.640 .376-.500 7030311 AA54D 5/32" .160-.164 11/64" 0.465 .188-.250 7030310 AA56D 5/32" .160-.164 11/64" 0.540 .251-.375 7030309 AA64D 3/16" .192-.196 13/64" 0.440 .126-.250 7030308 AA64LF 3/16"x5/8" .192-.196 13/64" 0.440 .126-.250 7030307 AA68 3/16" .192-.196 13/64" 0.565 .251-.375 7030306 SS66D 3/16" SS .192-.196 13/64" 0.565 .251-.375 7030305 AA66LF 3/16"x5/8" .192-.196 13/64" 0.565 .251-.375 7030300 AA68D 3/16" .192-.196 13/64" 0.690 .376-.500 7030301 AA610 3/16" .192-.196 13/64" 0.815 .501-.625 7030302 AA610LF 3/16"x5/8" .192-.196 13/64" 0.815 .501-.625 7030303 AA612 3/16" .192-.196 13/64" 0.940 .626-.750 7030304 AA612LF 3/16"x5/8" .192-.196 13/64" 0.940 .626-.750 Part# Ref # Description 9420052 8550 Heavy Duty Manual Rivet Tool

HARDWARE & LOCKS

Part# 9420055 9420053 7030163 9420054

Ref # T14 T25 T30 T40

9420055

Torx® Bit

9420052

Stake Pocket Part#

Ref #

Width

Depth

Height

Gauge

Description

9250097

STK02

3-1/2"

1-1/2"

3"

4

Stake Pocket

9250096

STK01

3-1/2"

1-1/2"

3"

8

Stake Pocket

WWW.TEXTRAIL.COM

J-10

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S Part# 8200003 8200004 8200005 8200105

Ref # 2589 2588 2591 2585

Part# 7030171 7030172 7030173 7030174 7030175 7030176 7030177 7030178 7030180 7030181 7030179 7030191 7030192 7030193 7030194 7030195 7030196 7030197

Ref # 18JDB 532JDB 1164JDB 316JDB 1364JDB 732JDB 14JDB 38JDB 532NDB 316NDB 38NDB 18SDB 964SDB 532SDB 1164SDB 316SDB 1364SDB 732SDB

Part# 7500237 7500009 7040009

Ref # 100578 100579 200096

Stake Components Description 4-Piece Stake Corner Security Latch Set 4-Piece Straight Security Latch Set 4-Piece Rack Corner Connector Set 4-Piece Rack Straight Connector Set Drill Bits Type Diam. Length Jobber 1/8" 2-3/4" Jobber 5/32" 3-1/8" Jobber 11/64" 3-1/4" Jobber 3/16" 3-1/2" Jobber 13/64" 3-5/8" Jobber 7/32" 3-3/4" Jobber 1/4" 4" Jobber 3/8" 5" Nitro 5/32" 2-1/16" Nitro 3/16" 2-3/16" Nitro 3/8" 3-1/8" Stubby 1/8" 1-7/8" Stubby 9/64" 1-15/16" Stubby 5/32" 2-3/16" Stubby 11/64" 2-1/8" Stubby 3/16" 2-3/16" Stubby 13/64 2-1/4" Stubby 7/32" 2-3/8" A 2" 3" 3"

B 96" 96" 96"

Twist 1-5/8" 2" 2-1/8" 2-5/16" 2-7/16" 2-1/2" 2-3/4" 3-5/8" 1" 1-1/8" 1-13/16" 7/8" 15/16" 1" 1-1/16" 1-1/8" 1-3/16" 1-1/4"

Description Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit Drill Bit

8200004

8200005

Description Rubber "D" Bumper Rubber "D" Bumper Rumber速 Grooved Surface "D" Bumper HARDWARE & LOCKS

Pre-Drilled Rubber Bumpers C D E* F* Bolt Size 2" 11-1/2" 5/8" 8 3/8" 4" 11" 1-1/8" 8 9/16" 4" 11" 1-1/8" 9 9/16" *E = Hole Size F = Number of Holes

8200003

7500040

7500162

Part# 7500162 7500047 7500041 7500040

Ref # RB78 RB11 RB212 RB112

Part# 8530001 8530002 8530003 5350253 8530004 8530005 8530006 8530007

Ref # CP1211 CP1251 CP2381 CP2382 CP2781 CP2116 CP2018 CP3316

Rubber Bumpers Diam. Height Hole Description 7/8" 1/2" 3/16" Rubber Bumper with Washer 1" 1" 1/8" Rubber Bumper with Washer 2-1/2" 1" 3/8" Rubber Bumper 1-1/2" 3/4" 1/4" Rubber Bumper with Washer Cap Plug Description Poly Cap Plug 1" X 2" Rectangular 1/16" Poly Cap Plug 1-1/4" x 1-3/4" Rectangular Poly Cap Plug 2-3/8" Round 1/16" Steel Cap Plug 2-3/8" Round 1/8" Poly Cap Plug 2-7/8" Round 1/16" Poly Cap Plug 2" Square x 1/16" Poly Cap Plug 2" Square x 1/8" Poly Cap Plug 3" Square x 3/16"

WWW.TEXTRAIL.COM

J-11

7500041

7500047

8530002

8530003

5350253

8530005

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S Packaged Locks Part# 8200356 8200357

Ref # 2848DAT 1481DAT

8200352

Description 1/2”-5/8” Receiver Lock Set Includes 8200354 & 8200362 5/8” Lock Set Stainless Steel Includes 8200352 & 8200362 8200357

8200356

8200350

8200353

8200231

8200354

8200351

HARDWARE & LOCKS

Receiver Hitch Locks Part# 8200353 8200221 8200351 8200354 8200103 8200352 8200350 8200197 8200216 8200217 8200218

Part# 7350109

Ref # 1472DAT T3 1479DAT 2866DAT TBB4 1480DAT 1469DAT TR200 T3B T3U T3R

Ref # 4843

Description Receiver Lock 1/2” Chrome 2-5/8”L for Class II 5/8" Steel Triple Plated Chrome Receiver Deadbolt Lock 5/8" Chrome Receiver Lock 2-3/4”L for Class III/IVChrome 1/2” or 5/8” Receiver Lock Chrome Bent Pin Class III-V 3-5/8”L 5/8" x 4-3/8" Locking Hitch Pin Barbell Heads 5/8" x 2-3/4”L Receiver Lock Stainless Steel 5/8" x 3/1/4" Pin Stainless Steel Receiver Lock 5/8" Chrome Receiver Deadbolt Lock 5/8" Black Epoxy Powder Coated Receiver Deadbolt Lock 5/8" Blue Epoxy Powder Coated Receiver Deadbolt Lock 5/8" Red Epoxy Powder Coated Receiver Deadbolt Lock

Wireless Back-Up / Hitch Assist Camera Monitor Power Camera Power Description Auxiliary/Lighter 4-Way Flat 3-1/2" Color Monitor with Magnetic Base & Camera

!

Wireless WWW.TEXTRAIL.COM

J-12

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S 8200141

8200047

8200058-02

Padlocks Part# 8200096

Ref # TL-45 8200058-02 40KA 8200208 TRP170 8200181 THPXL 8200184 THPXLKA 8200047 37D 8200141 3DAT 8200211 TLM4100 8200209 TPC125 8200210 TPC225 8200043 BL50 8200228 TLM87

Part# 8200047 8200365 8200367 8200179 8200043 8200361 8200361 8200363 8200364 8200366 8200059 8200362 8200360

8200047

Ref # 37D RC4 1471DAT SXTC2 F22 1475DAT 1475DAT RC2 RC3 RC5 1471DAT 2847DAT 2878DAT

8200059

8200367

8200360

Description Laminated Steel Masterlock Shielded Coupler Latch Lock 1-9/16" Wide Chrome Plated Steel 2-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Chrome Plated Steel 3-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Stainless Steel 2-1/2" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Brass 5/8" Span Coupler Latch Lock Chrome Plated Steel 7/8" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Stainless Steel 7/8" Span Coupler Latch Lock 1/4" Pin with Covered Key Slot Black Finished Coupler Latch Lock 1/2" Span with Covered Key Slot Black Finished Coupler Latch Lock 2" Span with Covered Key Slot Black Finished Coupler Latch Lock 2-3/8" Span with Covered Key Slot Chrome Plated Steel 3-3/8" Span Coupler Latch Lock 9/32" Pin with Covered Key Slot 9/16 - 2-3/4� Stainless Steel Coupler Latch Lock Multi Key Slot 7/8 Coupler Latch Lock with 3 keys

WWW.TEXTRAIL.COM

J-13

2010 Copyright by TexTrail, Inc.

HARDWARE & LOCKS

8200043

Description Heavy Duty Plated Steel Shielded Padlock 2-3/4" Diameter Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter - Keyed Alike Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable Heavy Duty "Hockey Puck" Internal Shackle Door Lock - Rekeyable - Keyed Alike Laminated Steel Masterlock Shielded Padlock 1-9/16" Wide Laminated Steel Masterlock Padlock 1-9/16" Wide 4-Pack Keyed Alike 40MM 1" X 1/4" Diameter Shackle Padlocks Brass Combination Resettable 2" Body 1-1/4" x 5/16" Diameter Shackle Padlock Set Brass Combination Resettable 2" Body 2-1/4" x 5/16" Diameter Shackle Padlock Set Deluxe Door Latch Lock Flat Keys 5/8" Span & Covered Key Slot solid Brass Solid Steel Laminated 1-3/16" Body 7/8" x 3/16" Diameter Dual Locking Shackle Padlock Coupler Latch Locks


H A R D WA R E & LO C K S

8200158

8200090 Position #1

8200140

8200090 Position #2

8200053

8200113

8200090 Position #3

8200368

Coupler Locks

HARDWARE & LOCKS

Part# Ref # Description 8200158 DT-25013 Coupler Lock for 1-7/8” to 2-5/16” w/ keys - locks both sides 8200113 379DAT Universal Die Cast Coupler Lock fits 1-7/8", 2" & 2-5/16" Couplers 8200102 377DAT Universal Coupler Lock fits 1-7/8" & 2" Couplers. Chrome. 8200053 TL-20* Aluminum Coupler Lock fits Bulldog 1-7/8", 2" & 2-5/16" Couplers. Aluminum Coupler Lock fits 2" & 2-5/16" 2K thru 10K Trigger Style Couplers 8200090 TL-33* Aluminum Coupler Lock fits 2" 5K Latch Style Couplers Aluminum Coupler Lock fits 2" & 2-5/16" 8K thru 10K Large Couplers * Excludes Padlock and Keys

WWW.TEXTRAIL.COM

J-14

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S LOCKS CONTINUED

8200141

8200096

8200047

8200185

Trailer Door Locks Ref #

Description

8200047

37D

Laminated Steel Masterlock Shielded Padlock 1-9/16" Wide

8200185

DL80

Lockrod Cam & Keeper Lock for Trailer Door with Butterfly / Cam Latch

8200141

3DAT

Laminated Steel Masterlock Padlock 1-9/16" Wide

8200215

8025

Hockey Puck Internal Shackle Hasp 2-Piece Chrome

8200096

D70

Heavy Duty Stainless Steel Shielded Padlock 2-3/4" Diameter Keyed Alike

See Master Lock products in advertisement in front of Catalog

WWW.TEXTRAIL.COM

J-15

2010 Copyright by TexTrail, Inc.

HARDWARE & LOCKS

Part#


H A R D WA R E & LO C K S LOCKS CONTINUED

8200168

8200051

8200096

8200070 Pintle Coupler Lock

King Pin Coupler Lock

8200069

8200057

GOOSENECK COUPLER LOCKS

HARDWARE & LOCKS

Part#

Ref #

Description Gooseneck 2-5/16" Coupler Lock - Aluminum 3/4" Heavy Duty Steel 8200051 TL-50* Locking Pin. Recommend to use with 8200168. Gooseneck Lock fits Round and Square Tubes. Secures Adjustable 8200168 TL-51* Top of Coupler. Use with 8200051. 8200096 TL-45 Heavy Duty Plated Steel Shielded Padlock 2-3/4" Diameter Deluxe Gooseneck Combo Lock Kit. Includes 8200051, 8200168 & 8200070 TL-53 8200096. Pintle Coupler Lock 2-1/2" to 3" Eye - Aluminum 3/4" Heavy Duty 8200057 TL-60* Steel Locking Pin. King Pin Coupler Lock - Aluminium 3/4" Heavy Duty Steel Locking 8200069 TL-70* Pin. * Excludes Padlock & Keys

WWW.TEXTRAIL.COM

J-16

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S LOCKS CONTINUED

8200023

8200248

8200165

Wheel Locks Ref # Description TCL75 Wheel Lock RA25 Wheel Lock RA25K Wheel Lock Keyed Alike EZ300 Wheel Lock Up To 15" TK100 Wheel Lock Up To 15"

Part# 8200248 8200023 8200024 8200165 8200076

8200076

Spare Tire Locks Part# 8200171 8200224 8200232

Ref # 262DAT F-562 ST30

Description Spare Tire Lock Lug Nut Style - Chrome Plated Spare Tire Lock Lug Nut Style - Chrome Plated for Side Mounted Spares Spare Tire Cable Lock 36" x 12MM (7/16") HARDWARE & LOCKS

8200224

8200171

Chain Part# 8850061 8850063 8850064 8850065 8850066 8850067 8850068

Ref # C316P C14P C516P C38P C1423 C1426 C1419

Description 3/16" Galvanized Proof Chain 3.2K 1/4" Galvanized Proof Chain 5.2K 5/16" Galvanized Proof Chain 7.6K 3/8" Galvanized Proof Chain 10.6K 5/16" Shot Blast High Test Chain 3/8" Shot Blast High Test Chain 1/4" Zinc High Test Chain

WWW.TEXTRAIL.COM

J-17

High Test Chain

Galvanized Proof Chain

2010 Copyright by TexTrail, Inc.


H A R D WA R E & LO C K S CHAINS CONTINUED

HARDWARE & LOCKS

Safety Chain Part#

Ref #

Size

Length Capacity Grade Description S-Hooks with Safety Latch on 8850026 6800031P 3/16" 48" 2K 30 Each End Zinc S-Hooks with Safety Latch on 8850030 6800032P 1/4" 48" 5K 30 Each End Zinc S-Hooks with Safety Latch on 8850031 6800033P 1/4" 60" 5K 30 Each End Zinc 7/16" Hook with Safety Latch 8850029 6840215P 1/4" 30" 5.2K 30 Zinc 1/4" Clevis Slip Hood with Safety 8850080 6800028P 1/4" 36" 12.6K 70 Latch 1/4" Clevis Slip Hook with Safety 8850024 6800025P 1/4" 28" 12.6K 70 Latch 3/8" Clevis Slip Hook with Safety 8850025 6800026P 3/8" 36" 26.4K 70 Latch 8850101

8605734

3/8"

36"

16.2K

8850028 8610004P

1/2"

40"

48K

WWW.TEXTRAIL.COM

J-18

Clevis Hook with Safety Latch 80

Clevis Sling Hook with Safety Latch 2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S

Table Of Contents - Actuating Systems ABS Trailer Kit

K-14

Actuating Couplers

K-6

Batteries & Chargers

K-2

Brake Control & Actuator Replacement Parts

K-8

Brake Control & Actuators

K-6

ACTUATING SYSTEMS

Brake Controllers

K-3 thru K-5

Breakaway Kits

K-2

Breakaway Switch & Pin

K-2

Chargers & Batteries

K-2

Electro/Hydraulic Actuators

K-9

Hydraulic Line Kit (Flexible)

K-12

Hydraulic Line Kit (Tandem Dual)

K-13

Hydraulic Line Kit

K-10

Truck Control Kit

K-14

Vacuum / Hydraulic Brake System

K-14

Vacuum Pump Kit

K-14

WWW.TEXTRAIL.COM

K-1

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S BREAK AWAY KITS Breakaway kits are designed to apply the trailers electric brakes in the event that the trailer becomes disconnected from the hitch while in motion and hold for 15 minutes. TexTrail offers kits that vary depending on mounting options and the number of axles on the trailer. All kits meet or exceed D.O.T regulations and include a 5 amp sealed rechargeable battery. Break Away Kits Part #

Ref #

6550020 6550036 6550021 6550037 6550028 6550038

86113 50-85312 86171 50-85-303 34-285 5085314

Description

6550021

Charger Included

Switch Included

LED

# of Axles

Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes

No No Yes Yes No

1-2 1-3 1-2 1-3 1-4

Breakaway Kit - clamshell box Breakaway Kit 5amp battery Breakaway Kit 5amp battery Breakaway Kit 5amp battery Breakaway Kit 9amp battery Post Mount Bracket for 6550037

6550037

These complete systems incorporate the highest quality components in trailer breakaway systems. Meet or exceed Department of Transportation (DOT) specifications regarding trailer breakaway and holding requirements. If a breakaway occurs between your tow vehicle and your trailer, the breakaway systems will automatically apply consistent braking power to your trailer brakes for a minimum of 15 minutes when installed according to manufactures instructions.

6550028

Break Away Switches & Replacement Pins Part # Ref # Description 6550019 20225 Breakaway Switch 6550039 80-01-2140 Breakaway Pin Zip CableD 6550010 2010 Breakaway Switch Tekonsha 6550011 2010A Replacement Pin/Cable 6550016 20012 Pin/Cable for 6550007 Switch

6550039 6550019

Chargers & Battery Ref # Description 20011 12 volt ABCD Charger 1024 12 volt ABCD Charger 2024 12 volt Continuous Charger 2023 Battery 12 volt 5 amp

6500027 6250007

6550003

Check your breakaway kit periodically to insure that wiring and connections are secure. A short or an open circuit can result in a no-brake condition. For optimal performance, IT IS RECOMMENDED THAT BREAKAWAY DEVICES BE REPLACED EVERY 3 - 5 YEARS.

ABCD Charger Accelerated Battery Charging Device - Minimal Charging Capacity for Partially depleted Battery - Not Effective for Batteries Under 7 Volts Remaining WWW.TEXTRAIL.COM

V S K-2

Full Capacity or Integrated Charger - Temperature Compensated DC to DC - Maximum Charging Capacity Even if Battery Is Almost Depleted - Effective With Batteries Down To 1 Volt Remaining Charge 2010 Copyright by TexTrail, Inc.

ACTUATING SYSTEMS

Part # 6550003 6250007 6500027 6250009

6550020


AC T UAT I N G S YS T E M S TIME BASED BRAKE CONTROLLER

Pod® for 1 and 2 Axle Trailers - Solid state electronics - Power-on LED for a positive tow vehicle-to-trailer connection - “Up- front” manual over-ride control - Rugged, easy mount chassis - Mounting hardware included - Smooth and simple installation • 5 year limited warranty

Pilot® for 1 to 3 Axle Trailers

- Large easy to read dual digital display shows: - Properly wired control - Voltage output to brakes (vs. a percentage) - Connection to trailer - Dark smoke lens ideal for direct light applications; performs better than red lens - Protection against short circuit/loss of ground - Can be mounted upside down and still have a readable display - Standard mounting bracket included with optional ball mount available - For use on any 12 volt negative ground system - Limited lifetime warranty

ACTUATING SYSTEMS

Synchronizer® for 1 to 4 Axle Trailers - New Quik-Connect feature - Provides automatic and manual braking - For use on all trailers with 2 or 4 electric brakes - Red L.E.D. indicator monitors controller performance and trailer wiring integrity - Operates stoplights on tow vehicle and trailer during automatic and manual operations for added safety and awareness - Manual operation is independent of power setting to allow full 12-volt output - Built-in automatic current limiter protection from trailer brake wiring shorts - Multiple mounting holes and bracket - For use on all 12-volt negative ground vehicles - Three year limited warranty

POD (Power on Demand) is your best choice for 1 or 2 axle trailers ... especially when your installation options are limited. POD can be mounted in any direction, and features “up-front-easyaccess” adjustment controls, even when mounted upside down. POD is the perfect choice with almost vertical dash mounting surfaces.

Part# 6500001 Model 80500

Pilot has a dark, smoke lens that is ideal for direct light applications, creating optimum visibility to read the large, two-digit display. Pilot has flexible mounting options and can be installed in any direction. Our microprocessor allows you the ability to read the display even when mounted upside down. The Pilot’s digital display shows voltage output to the brakes. Part# 6500013 Model 80550

Part# 6500022 Pivot Bracket-Sold Separately

The Synchronizer® is a brake controller for single and tandem axle trailers equipped with electric brakes. It modulates and controls current from the battery to the trailer brakes. The longer the brake pedal is depressed the greater the current delivered to the trailer brakes until the preset brake power setting is reached.

Part# 6500011 Model 81725

Discovery® for 1 to 4 Axle Trailers - Digital display provides detailed brake force information - Quick -plug connector easily connect to vehicle using a CURT quickplug harness. - Controls any trailer with 2 to 8 electric brakes - Fully adjustable power and ramp time - Manual control lever - Thumb wheel output control lever - Electronic activation ensures smooth stops - Provides automatic and manual trailer braking - Limited lifetime warranty WWW.TEXTRAIL.COM

The Discovery® is a brake controller for single and tandem axle trailers equipped with electric brakes. It is compatible with anti-lock brakes and cruise control. It has a self diagnostic system that continually monitors connection and checks for shorts. Works with electric over hysraulic systems. K-3

Part# 6500064 Model 51120

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S INERTIA BRAKE CONTROLLER

Part# 6500009 Model 81741B

Energize III® for 1 and 2 Axle Trailers - Quik-Connect feature - Smooth, proportional trailer braking - For all single and tandem axle trailers equipped with electric brakes - Designed for use on any 12-volt negative ground vehicles - Full 12-volt output provided with manual lever activation - Superior responsiveness - Fully adjustable gain setting wheel - Compatible with all electronic systems (ABS, cruise, etc.) - Wide range of mounting positions; perfect for steep dash surface mounting

- Easy adjustment and standard four-wire hookup - Trailer/Tow vehicle stoplights operate when trailer brakes are applied automatically or with manual lever - Red L.E.D. indicator displays braking intensity and warns of short circuit - Five year limited warranty Energize III® all electronic brake controller features a patented sensing device that automatically monitors and measures tow vehicle deceleration and applies the trailer brakes in direct proportion. It reacts instantly to any change in brake pedal pressure and ensures controlled, smooth stops. Trailer and tow vehicle stoplights operate automatically when the

manual lever or trailer brakes are applied.

DX2 Electric Brake Controller

Part# 6500012 Model 58-008-00

- Digital LED that displays voltage output & assists with leveling setup - Power window that provides a numeric visual indication of gain setting - Independent manual slide level that overrides the gain setting for full power - Manual slide override that provides braking power at which ever setting is greater - Short circuit protection - Seven year limited warranty

Inertia-activated electric brake controller. For use on single and tandem axle trailers. Includes DX2 electric brake controller, mounting hardware, instruction manual, and quick reference card.

PROPORTIONAL BRAKE CONTROLLER

Voyager® Electronic Brake Control, for 1 to 4 Axle Trailers

Part# 6500017 Model 9030

Primus®IQ Electronic Brake Control, for 1 to 3 Axle Trailers - Utilizes “Plug-N-Play” port for 2-plug adapters - Self-diagnostics features will illuminate LED readout when issues occur - Includes a “Boost” feature - Works proportionally in reverse - Snap-in dash mounting clip and hardware included - Digital LED readout - Limited 15 Year warranty

WWW.TEXTRAIL.COM

Part# 6500045 Model 90160

K-4

The Voyager® incorporates Tekonsha’s patented braking sensor and is the best value you’ll find for smooth and secure trailer braking. It’s compact size and features, like a bicolored LED brake monitor (to assure a complete connection to trailer brakes and give an indication of relative braking power being applied) make the Voyager® extremely versatile. Voyager® minimizes interference with tow vehicle electrical systems, uses a four wire hook up, has a broad setting range and is compatible with most any vehicle. The Voyager® has all the extra power you’ll need for trailers with 6 or 8 brake systems.

A totally proportional electric trailer brake control, the new Primus®IQ is self-leveling so no level adjustment is necessary. Utilizing the primary sensor technology from Prodigy®, the Primus®IQ now includes the “Boost” feature that gives users the ability to apply more initial trailer braking when towing heavier trailers. It works proportionally in reverse for backing into tough spots and includes a snap-in dash mounting clip and removable electrical connector that allows the unit to be quickly stored when not in use. You will appreciate the digital readout depicting a secure electrical connection, amount of voltage delivery to the trailer brakes and diagnostic features incorporated in the LED display. 2010 Copyright by TexTrail, Inc.

ACTUATING SYSTEMS

- True Proportional Braking Power: Inertia Activated Sensor - Two Control System: Controls power output to brakes and braking response - Manual Override: Aids in setting controls and allows manual application of brakes - LED Light Display indicates a completed electrical circuit and changes from green to red indicating relative braking power - Instals conveniently under vehicle dash - Five year limited warranty


AC T UAT I N G S YS T E M S PROPORTIONAL BRAKE CONTROLLER CONTINUED

Prodigy® Electronic Brake Control, for 1 to 4 Axle Trailers - Meets National Highway Traffic Safety Administration (NHTSA) regulations regarding tow vehicle/trailer light activation - Includes a 3 ft. pigtail connector for ease of connection when using a vehicle’s brake control wire harness - Digital LED readout - Limited lifetime warranty

Part# 6500004 Model 90185

Prodigy® is the most intelligent brake control. This powerful control features new motion sensor technology similar to what is used in the aerospace industry. With Prodigy® no manual level adjustment is necessary, it adjusts itself to varying terrains as you drive. It is equipped with a sensor that detects the tow vehicle’s rate of deceleration, applies proportional braking to the trailer and features an exclusive “BoostSM” feature that gives users the ability to apply more initial trailer braking power (especially when towing heavier trailers). For backing into tough spots this is the only inertia control that works proportionally in reverse. A digital display depicts voltage delivery to the trailer during braking and displays continual diagnostics check for proper connection, shorted magnet condition, open ground and much more. A unique pocket mount allows for flexible mounting options (standard mounting bracket included). A quick and easy disconnect feature allows users to remove the control when not in use and store in a supplied protective pouch.

P3® Electronic Brake Control, for 1 to 4 Axle Trailers - Distinct, easy to see LCD display with multiple color and contrast options - User can customize to choose English, French or Spanish display - Allows the user to switch between Electric and Hydraulic brakes - Highly advanced, easy-to-understand, roadside diagnostics - Easy access, “Up-Front’ controls - The original “Boost” feature allows for different levels of customized braking - Compact, dash-hugging design - Unique, easy-to-use, clip-mounting systems - Quick disconnect for easy storage; convenient storage pouch included - Limited lifetime warranty

Part# 6500052 Model 90195

There has never been a more advanced, yet user friendly, proportional system offered for trailer braking than the Tekonsha P3®. In addition to multiple color and contrast options, the LCD display features highly advanced, easy-to-understand roadside diagnostics. P3’s convenient features include a dash-hugging design, unique easy-to-use clip-mounting system, quick disconnect for safe storage when not in use and the original “Boost” feature that allows the driver to increase the initial power delivered to the trailer brakes.

Prodigy® RF Electric Trailer Mounted Brake Control, for 1-3 Axle

Brake Control Harness

Brake Control Harness (Continued)

Packaged

Bulk

Part #

Ref #

Year

Make

Description

6500049-01

TTBCG49

05-09

Ford

Brake Control Harness

6500039-01

TTBCH39

99-06

GM

Brake Control Harness

7000003

56070

Chevy/GMC/Ford

7’ Hitch Adapter Harness

7000004

56071

Dodge

7’ Hitch Adapter Harness

7000004

7000003

WWW.TEXTRAIL.COM

Part #

Ref #

Year

Make

6500041

47745

97-11

Dodge/Chrysler/Jeep

Description Brake Control Harness

6500049

47725

05-09

Ford

Brake Control Harness

6500040

47705

94-11

Ford/Mercury/Landrover/Lincoln

Brake Control Harness

6500061

3036

09-11

Ford F-150

Brake Control Harness

6500051

3034

08-11

Ford Econoline/F-250 thru F-550

Brake Control Harness

6500062

3026

09-11

GM-Chevy/Buick/GMC

Brake Control Harness

6500062

3026

07-11

GM-Saturn Only

Brake Control Harness Brake Control Harness

7000089

3015

03-07

GM

6500039

47775

99-07

GM

Brake Control Harness

7000332

47635

04-11

Nissan/Infiniti

Brake Control Harness

6500053

3040

03-11

Toyota/Lexus

Brake Control Harness

K-5

2010 Copyright by TexTrail, Inc.

ACTUATING SYSTEMS

Prodigy® RF Electronic Brake Control, for 1 to 3 Axle Trailers, Trailer Mounted, Proportional. Utilize for rental businesses, fleet ownerships or multiple - Remote Hand Held Unit tow vehicles. Requires no leveling. - No under dash wiring necessary – utilizes wireless communication - The original “Boost” feature allows for different levels of customized braking Part# 6500060 Model 90250 - System runs continual diagnostics and displays fault codes in unit’s display - Plugs into standard 12-volt power accessory adapter - Trailer Mount (Power Module) Unit - 5 year limited warranty - Utilizes standard sealed 8’ blade style 7-way connector - Multiple mounting positions on tongue or front of trailer - 15 year limited warranty on power module - 1 year limited warranty on cord


AC T UAT I N G S YS T E M S DICO / TITAN Model 60 Item #

Ref #

Solenoid Tongue Ball Size Installed Size

Type

Finish

Capacity

Tongue Weight

9050055 4332900

No

2"

3"

Drum - Weld /Bolt-On

Zinc

6,000

600

9050056 4175420

Yes

2"

3"

Disc - Weld / Bolt-On

Zinc

6,000

600

Type

Finish

Capacity

Tongue Weight

DICO / TITAN Model 6 Item #

Ref #

Solenoid Tongue Ball Size Installed Size

9050050 4079220

Yes

2-5/16"

3"

Drum - Weld /Bolt-On

Zinc

7,500

600

9050052 4747220

Yes

2-5/16"

3"

Disc - Weld / Bolt-On

Zinc

7,500

600

Type

Finish

Capacity

Tongue Weight

Disc - Weld /Bolt-On

Zinc

8,000

800

Type

Finish

Capacity

Tongue Weight

Drum - Weld /Bolt-On

Zinc

12,500

1,250

Type

Finish

Capacity

Tongue Weight

Drum - Weld

Painted

12,500

1,250

Type

Finish

Capacity

Tongue Weight

DEMCO Model DA91 (with “Auto-Lock” Coupler) Item #

Ref #

9050083 8750311

Tongue Solenoid Ball Size Size Installed Yes*

2-5/16"

3"

*Recirculating / Bypass solenoid

DICO / TITAN Model 10 Item #

Ref #

9050071 4750800

Solenoid Tongue Ball Size Installed Size No

2-5/16"

3"

DEMCO Model DA10 ACTUATING SYSTEMS

Item #

Ref #

9050084 8101222

Solenoid Tongue Ball Size Installed Size No

-

3"

DICO / TITAN Model 10 Item #

Ref #

Tongue Solenoid Ball Size Size Installed

9050085 2478100

No

2-5/16"

3"

Drum - Weld /Bolt-On

Zinc

12,500

1,250

9050070 4750600

No

2-5/16"

3"

Disc - Weld / Bolt-On

Zinc

12,500

1,250

WWW.TEXTRAIL.COM

K-6

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S DEMCO Model DA20 Item #

Ref #

Solenoid Tongue Ball Size Installed Size

Type

Finish

Capacity

Tongue Weight

9050087 8202802

No

2-5/16"

3"

Drum - Weld /Bolt-On Painted

20,000

2,000

9050088 8203602

Yes

2-5/16"

3"

Disc - Weld / Bolt-On

Painted

20,000

2,000

Type

Finish

Capacity

Tongue Weight

DICO / TITAN Model 20 Item #

Ref #

Solenoid Tongue Ball Size Installed Size

9050074 4042700

No

2-5/16"

3"

Drum - Weld /Bolt-On

Zinc

20,000

2,000

9050067 4750400

No

2-5/16"

3"

Disc - Weld / Bolt-On

Zinc

20,000

2,000

Type

Finish

Capacity

Tongue Weight

Drum - Weld

Zinc

20,000

2,000

Type

Finish

Capacity

Tongue Weight

DEMCO Model DA20 Item #

Ref # 8204011

Solenoid Tongue Ball Size Installed Size No

2-5/16"

3"

DEMCO Model DA91 Item #

Ref #

9050090 8759522

Solenoid Tongue Ball Size Installed Size -

A-Frame

Drum - Weld

Painted

8,000

800

Yes

-

A-Frame

Disc - Weld

Painted

8,000

800

Type

Finish

Capacity

Tongue Weight

A-Frame

Weld

Painted

7,000

700

2-5/16" A-Frame

Weld

Painted

7,000

700

Solenoid Tongue Ball Size Installed Size

Item #

Ref #

9050044

16100

No

9050011

16039

No

Item #

Ref #

2"

Description

6450624 4748800 Back-up solenoid valve (normally open); inlet 1/8" NPTM and outlet 3/16" F.I.F.

WWW.TEXTRAIL.COM

K-7

2010 Copyright by TexTrail, Inc.

ACTUATING SYSTEMS

No


AC T UAT I N G S YS T E M S Replacement Parts

ACTUATING SYSTEMS

16500

1844-2

16014

Item #

Ref #

Description

9050030

10614

Toledo Actuator Replacement Master Cylinder Kit

9050022

16500

Toledo Actuator Replacement Cap for Master Cylinder

9050041

1844-2

Toledo Actuator – Replacement Shock Absorber

Item #

Ref #

Description

9050031

5650

Demco Actuator Replacement Master Cylinder All Drum Models

9050091

5672

Demco Actuator Replacement Master Cylinder All Disc DA66, DA91 & DA10

7950007

3876

Demco Actuator Replacement Cap for Master Cylinder

9050092

5692

Demco Actuator Replacement Shock for DA66

9050019

12426

Demco Actuator Replacement Shock. Fits DA91, DA10 & DA20

Item #

Ref #

Description

9050021

23362

Titan Actuator Replacement Shock Model 60

9050093

44807

Titan Actuator Replacement Filler Cap Model 60

9050094

43951

Titan Actuator Replacement Master Cylinder - Drum Model 60

9050062

48200

Titan Actuator Replacement Master Cylinder - Disc Model 60

9050019

12426

Titan Actuator Replacement Shock Model 6

9050095

17556

Titan Actuator Replacement Filler Cap Model 6

9050096

10271

Titan Actuator Replacement Master Cylinder - Drum Model 6

9050061

47470

Titan Actuator Replacement Master Cylinder - Disc Model 6

9050019

12426

Titan Actuator Replacement Shock Model 10

9050095

12503

Titan Actuator Replacement Filler Cap Model 10

9050032

23744

Titan Actuator Replacement Master Cylinder - Drum Model 10

9050063

47471

Titan Actuator Replacement Master Cylinder - Disc Model 10

9050065

7784

Titan Actuator Replacement Shock Model 20

9050097

12503

Titan Actuator Replacement Filler Cap Model 20

9050032

23744

Titan Actuator Replacement Master Cylinder - Drum Model 20

N/A

47470

Titan Actuator Replacement Master Cylinder - Disc Model 20

9050075

40454

Titan Actuator Replacement Multi Fit Coupler Repair Kit Model 6 and 60

9050082

43584

Titan Actuator Replacement 2-5/16" Coupler Repair Kit Model 6

9050098

18487

Titan Actuator Replacement 2-5/16" Coupler Repair Kit Model 20

WWW.TEXTRAIL.COM

K-8

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S Electro/Hydraulic Brake Actuator Electro/Hydraulic brake actuator provides pressure for 1-3 axles. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed housing provides a weather tight seal. Two year limited warranty. Item #

Ref #

Description

7010004

K71-650 Dexter Drum Brake Actuator 1000psi

7010005

K71-651 Dexter Disc Brake Actuator 1600psi

*Requires use of breakaway kit 6550028 See Page K-2

Electro/Hydraulic Brake Actuator Item #

Ref #

Description

7010001

HBA-10

Carlisle Hydrastar Drum Brake Actuator 1000psi

7010002

HBA-16

Carlisle Hydrastar Disc Brake Actuator 1600psi

7010006

HBA-BC

Carlisle Hydrastar Actuator Replacement Cap

Actuating System Parts Ref # 18018MF 18018SF 302X3 100X3

Description

ACTUATING SYSTEMS

Item # 9500018 9050128 9500063 9500066

Hydraulic Brake Hose 3/8-24 Male/Female 18” long Hydraulic Brake Hose Torsion 90 ° Male: 3/8-24 (90 ° ) Female: 3/8-24 18”Long Hydraulic Fitting Union Line 3/16” for 3/16” OD Steel Line Brass Hydraulic Fitting Tube Nut 3/16” OD Line Nut inverted Flare

9500063

9500018

WWW.TEXTRAIL.COM

9050128

K-9

9500066

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S Hydraulic Line Kits Hydraulic Line Kits come complete with all fittings needed to connect hydraulic brake axles. Kits begin with a basic single line kit and with the additional “add-on” kit you can plumb more brakes. Choose from Steel (with Alum Galfan Finish), Stainless Steel, Torsion or DOT approved “Flex” line kits. The standard hydraulic brake line kits listed below are designed to be used on trailers using either surge brake actuators or power brake actuators and are manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527.

Item # 9500038 9500040

Item #

Ref #

Description

AG-100SA Line Kit - Single Axle DRUM 3/16" x 15' S-100SA

Ref #

Line Kit - Single Axle DRUM Stainless Stl 3/16" x 15'

Ref #

QTY

Description

1

1 ea

3/16" x 15' Brake Line

2

1 ea

3/16" x 72" Brake Line

3

1 ea

3/16" x 17.5" Brake Line

4

1 ea

18" Flex Brake Line ML/FML

5

1 ea

Hose Bracket

6

3 ea

Hose Clip

7

3 ea

3/16" IF Union Tee w/ Brkt

8

3 ea

Tube Clamp

9

3 ea

Self Tab Screw

10

3 ea

Axle Strap

11

1 ea

1/8 MPT x 3/16 IF Adapter

Description

9500039 AG-130SA Line Kit - Add-On for AG-100SA 9500041

S-130SA

Line Kit - Add-On for Stainless Stl S-100SA

ACTUATING SYSTEMS

* USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE Ref #

QTY

Desc

1

1 ea

3/16" x 30' Brake Line

2

1 ea

3/16" x 72" Brake Line

3

1 ea

3/16" x 17.5" Brake Line

4

1 ea

18" Flex Brake Line ML/FML

5

1 ea

Hose Bracket

6

1 ea

Hose Clip

7

1 ea

3/16" IF Union Tee w/ Brkt

8

1 ea

3/16" IF Adapter Tee

9

1 ea

Tube Clamp

10

1 ea

Self Tab Screw

11

3 ea

Axle Strap WWW.TEXTRAIL.COM

K-10

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S Description

Item #

Ref #

9500042

AG-300-TR

Line Kit - Single Axle Torflex (DISC) 3/16" x 15'

9500044

AG-701-TR

Line Kit - Single Axle Torflex (DISC) Deluxe 3/16" x 15'

QTY

Description

1

1 ea

3/16" x 72' Brake Line

2

1 ea

3/16" x 30" Brake Line

3

2 ea

3/16" x 5" Brake Line

4

2 ea

13" Flex Brake Line ML/FML

5

2 ea

Hose Brkt

6

2 ea

Hose Clip

7

2 ea

3/16" IF Street Tee

8

2 ea

Tube Clamp

9

2 ea

Self Tab Screw

WWW.TEXTRAIL.COM

QTY

Desc

1

1 ea

3/16” x 15’ Brake Line

2

1 ea

3/16” x 72” Brake Line

3

2 ea

3/16” x 5” Brake Line

4

1 ea

3/16” IF Street Tee

5

2 ea

13” Flex Brake Line ML/FML

6

2 ea

Hose Brkt

7

2 ea

Hose Clip

8

4 ea

Tube Clamp

9

4 ea

Self Tab Screw

10

1 ea

1/8 MPT x 3/16 IF Adapter

Item #

Ref #

9500043

AG-600-AK

Description Line Kit - Add-On for AG-300-TR

9500045

AG-700-AK

Line Kit - Add-On for AG-701-TR

* USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE

ACTUATING SYSTEMS

Ref #

Ref #

K-11

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S FLEXIBLE Hydraulic Line Kits

ACTUATING SYSTEMS

Designed to be used on trailers with either surge brake actuators or powered brake actuators, such as the electric over hydraulic. Can be used with drum or disc brakes. Brake lines are DOT flexible hoses approved for use on all trailers. All fittings are brass for ultimate corrosion resistance. Do not exceed 3,000 psi. Item #

Ref #

9500046

F-100-SA

Description Line Kit - Single Axle "DOT Flex Line"

Ref #

QTY

Desc

1

1 ea

72' FLEX Brake Line

2

1 ea

48" FLEX Brake Line

3

1 ea

18" FLEX Brake Line

7

1 ea

3/16" IF Union Tee w/ Brkt

8

1 ea

3/16" IF Adapter Tee

9

3 ea

Tube Clamp

10

3 ea

Self-Tap Screw

11

3 ea

Tie Strap

Item #

Ref #

Description

Ref #

QTY

Description

1

1 ea

72' FLEX Brake Line

9500047

2

1 ea

48" FLEX Brake Line

* USE WITH SINGLE LINE KIT FOR EACH ADDITIONAL AXLE

3

1 ea

18" FLEX Brake Line

7

1 ea

3/16" IF Union Tee w/ Brkt

8

3 ea

Tube Clamp

9

3 ea

Self-Tap Screw

10

3 ea

Tie Strap

11

1 ea

1/8 MPT x 3/16 IF Adapter

WWW.TEXTRAIL.COM

K-12

F-130-SA Line Kit - Add-On for F-100-SA

2010 Copyright by TexTrail, Inc.


AC T UAT I N G S YS T E M S Tandem Dual Hydraulic Line Kits Designed to be used on longer trailers. Includes 25 feet of main line verses 15 feet in the standard kit. Disc kit includes hoses designed to be used with disc brake calipers with 7/16-20 male ends avoiding the use of additional fittings. Item #

Ref #

9500015

T-1002

Description Line Kit - Tandem Dual For Drum

Ref #

QTY

Description

1

1 ea

3/16" x 25' Brake Line

2

3 ea

3/16" x 51" Brake Line

3

2 ea

3/16" x 60" Brake Line

4

2 ea

18" Flex Brake Line ML/ FML

5

2 ea

Hose Brkt

6

2 ea

Hose Clip

7

2 ea

3/16" IF Union Tee w/ Brkt

8

1 ea

3/16" IF Street Tee

9

8 ea

Tube Clamp

10

8 ea

Self-Tap Screw

Item #

Ref #

9500014 T-1002D

QTY

Description

Description

1

1 ea

3/16" x 25' Brake Line

Line Kit - Tandem Dual w/ Deluxe Hoses

2

1 ea

3/16" x 51" Brake Line

3

2 ea

3/16" x 60" Brake Line

4

4 ea

18" x 7/16-20 Flex Line ML/FML

5

4 ea

Hose Brkt

6

4 ea

Hose Clip

7

3 ea

3/16" IF Street Tee

8

8 ea

Tube Clamp

9

8 ea

Self-Tap Screw

WWW.TEXTRAIL.COM

K-13

2010 Copyright by TexTrail, Inc.

ACTUATING SYSTEMS

Ref #


AC T UAT I N G S YS T E M S ABS TRAILER KITS Meritor WABCO has been a trailer ABS technology leader since 1993 with ABS offered as standard equipment at all major trailer OEM’s. Enhanced Easy-Stop™ ABS provides unparalleled trailer monitoring and control capabilities to fleet and owner-operators with system configurations to meet virtually any trailer application – basic, standard, and premium. These kits provide increased directional stability while meeting FMVSS-121 requirements for ABS air brake systems and offer the benefits of reduced tire flat spotting and trailer swing. Part #

Ref #

Description

6050017-02

2S/1M

Tandem Axle ABS kit - One Axle ABS

6050018-02

4S/2M

Tandem Axle ABS kit - Two Axles ABS

6050008

Air Tubing - 3/8" Blue sold per foot

6050009

Air Tubing - 3/8" Red sold per foot

TRUCK CONTROL KITS The TK Series of vacuum / hydraulic truck control kits are designed to provide trailer braking actuation by synchronizing the trailer brakes to the truck brake system. Part #

Ref #

Description

REPLACEMENT PARTS

9500052

TK-3000 Up to 1 ton w/ 30' Vac. Hose

Part #

Ref #

Description

9500053

TK-3050 Up to 1 ton w/ 50' Vac. Hose

9500056

SV-2950

Truck Sync Valve

9500054

TK-3100 Over 1 ton w/ 30' Vac. Hose

9500057

SV-2951

Truck Sync Valve (2-ton pre 1986)

9500055

TK-3150 Over 1 ton w/ 50' Vac. Hose

9500058

RV-9200

Relay Valve

9500051

TK-4050 Air / Hydraulic Truck Booster Kit

ACTUATING SYSTEMS

TRUCK CONTROL KITS Part #

Ref #

Description

9500003

VP-2100

Vacuum Pump Kit - Complete

9500049

VP-2101

Vacuum Pump Controller Kit

9500050

40011

Replacement Vac Pump - Electric

Then UNIVERSAL ELECTRIC vacuum pump kit provides a vacuum source for the diesel and EFI engine trucks with vacuum / hydraulic brake trailer. This is a direct drive 12V pump that requires NO pulleys or belts. WWW.TEXTRAIL.COM

K-14

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL

LIGHTS & ELECTRICAL

Table Of Contents - Lights & Electrical Adapters Back-Up Lights Bracket for Electrical Connectors Brackets for Lighting Bulbs Cable Ties Certificate / Permit Holder Clearance & Side Marker Lights Connectors Conspicuity Tape Decorative Brackets Electrical Accessories Flashing & Revolving Lights Fleet Count Grommets Identification Light Bars Incandescent Lighting Interior & Dome Lights LED Light Kits LED Lighting LED Micro-Flex™ Lighting Lenses for All Lighting License Lights Light Plugs, Pigtails & Lead Wires Micro-Flex™ LED Lighting Mounting Accessories Quick Splices Reflective Tape Reflectors Specialty Lighting Stop / Turn / Tail Lights Terminal Connectors Terminal Pliers Tractor, Halogen & Tow Lights Trailer Connectors Turn Signal Lights Utility Lights Wire & Cable Wiring Harnesses WWW.TEXTRAIL.COM

L-1

L-28 L-20 L-30 L-23 thru L-24 L-35 L-31 L-26 L-2, L-7 & L-13 L-28 L-38 L-24 thru L-25 L-28 thru L-34 L-22 L-2 L-25 thru L-26 L-2, L-9 & L-17 L-13 L-22 L-13 L-2 & L-7 L-2 L-38 L-13 & L-20 L-26 L-2 L-23 thru L-24 L-30 L-38 L-38 L-22 L-2, L-10 & L-18 L-30 thru L-31 L-31 L-22 L-28 L-11 & L-19 L-12 & L-22 L-35 thruL-37 L-28 2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL 8100651 8100644 8100594

8100645

8100593

8100646

8100628

8100627

LED Lighting Part# 8100594 8100593 8100628 8100644 8100645 8100646 8100625 8100626 8100641 8100640 8100627 8100651 8100648

8100535

Ref # Diode AL-90AB 1 AL-90RB 1 MCL-83RB 1 MCL-61AB 2 MCL-61RB 2 MCL-61ARB 2 MCL-56AB 1 MCL-56RB 1 MCL-527AB 2 MCL-527RB 2 STL-12RB 6 STL-73RB 6 STL-13RB 7

8100603

8100638

8100639

Type Mini Mini Mini Thinline Thinline Thinline 2" Round 2" Round 2-1/2" Round 2-1/2" Round 6" Oval 6" Oval 4" Round

8100602

Hole Size Clearance / Marker Clearance / Marker Identification Light Bar Clearance / Marker Clearance / Marker Fender Light Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Stop, Tail & Turn Stop, Tail & Turn Stop, Tail & Turn

8100534

8100557

8100563

WWW.TEXTRAIL.COM

Hole Size Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Clearance / Marker Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Park & Turn Signal Stop, Turn & Tail Stop, Turn & Tail Stop, Turn & Tail Park & Turn Signal L-2

8100626

8100641 8100640

8100600

8100636

8100601

8100637

8100650 8100604 8100605

Description Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Surface Mount Sealed Amber LED Light Micro-Flex™ Surface Mount Sealed Red LED Light Micro-Flex™ Surface Mount Sealed Amber LED Light Micro-Flex™ Surface Mount Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Sealed Amber LED Light Kit Micro-Flex™ Sealed Red LED Light Kit Micro-Flex™ Sealed Amber LED Light Micro-Flex™ Sealed Red LED Light Micro-Flex™ Flush Mount Amber LED Light Micro-Flex™ Flush Mount Red LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Kit Micro-Flex™ Sealed Flush Mount Amber LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Micro-Flex™ Sealed Flush Mount Red LED Light Straight Kit Micro-Flex™ Sealed Flush Mount Red LED Light Right Kit Micro-Flex™ Sealed Flush Mount Amber LED Light

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

Part# Ref # Diode Type 8100535 MCL-50AB 9 2" Round 8100603 MCL-50RB 8 2" Round 8100638 MCL-502AB 3 2" Round 8100639 MCL-502RB 3 2" Round 8100602 MCL-51AB 3 2-1/2" Round 8100488 MCL-51RB 3 2-1/2" Round 8100600 MCL-17AB 3 4-3/16" Oblong 8100601 MCL-17RB 3 4-3/16" Oblong 8100636 MCL-19AB 4 5-3/4" Oblong 8100637 MCL-19RB 4 5-3/4" Oblong 8100604 MCL-63AB 4 Thinline 8100605 MCL-63RB 4 Thinline 8100615 MCL-63AK 4 Thinline 8100616 MCL-63RK 4 Thinline 8100608 AL-191AB 3 Mini Thinline 8100609 AL-191RB 3 Mini Thinline 8100534 STL-35AB 16 Rectangular 8100563 STL-35RB 16 Rectangular 8100557 STL-22RB 12 6" Oval 8100654 STL-22RK 12 6" Oval 8100649 STL-22AB 12 6" Oval 12 4" Round 8100610 STL-23RB 8100611 STL-23RK 12 4" Round 8100612 STL-23RK 12 4" Round 8100650 STL-23AB 16 4" Round

8100625

8100610

8100649

8100488

8100608

8100609

Description Amber LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Amber & Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Amber LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light Red LED Fleet Count Light


LIGHTS & ELECTRICAL IMPORTANT NOTE: Every lamp, reflex reflector, and conspicuity treatment (device) must be permanently attached in the location specified below and must comply with all applicable requirements prescribed for it by FMVSS/CMVSS 108. The face of any device on the front/rear and sides should be, respectively perpendicular and parallel to vehicle center line, unless it is photometrically certified at installation angle. No part of the vehicle shall prevent any device from meeting its prescribed requirements unless an auxiliary device meeting all prescribed requirements is installed. In Canada: Manufacturers and importers of vehicles must have the proper certification test records demonstrating compliance of lighting components with all prescribed requirements.

BASIC EQUIPMENT REQUIRED FOR ALL TRAILTRAILER WIDTH UNDER 80” DESCRIPTION AREA

1

2

3

EQUIPMENT

(SAE LENS CODING)

FUNCTIONAL PURPOSE

MIN QNTY

COLOR

LOCATION

HEIGHT mm (in.) FROM GROUND

Tail Lamps

(T)

Indicates vehicle’s presence and width

2

Red

On the rear - symmetrical-as far apart as practicable

380-1830 (15-72)

Stop Lamps

(S)

Indicate braking

2

Red

On the rear - symmetrical-as far apart as practicable

380-1830 (15-72)

Rear Turn Signal Lamps

(I)

Indicate direction of turn

2

Red or Yellow

On the rear - symmetrical-as far apart as practicable

380-2110 (15-83)

Rear Reflex Reflectors

(A)

Indicate vehicles presence and width

2

Red

On the rear - symmetrical-as far apart as practicable facing rearward

380-1530 (15-60)

License Plate Lamps

(L)

Illuminates license plate

1

White

On the rear - above or at the sides of license plate

No requirement

Front and rear side marker lamps / side reflectors indicate vehicle’s presence and length

2

Red

Each side at rear - as far back as practicable

380-1530 (15-60) no max.

2

Red

Each side at rear - as far back as practicable

380-1530 (15-60)

2

Yellow

Each side at front - as far forward as practicable

380 (15) min.

2

Yellow

Each side at front - as far forward as practicable - facing sideward

380-1530 (15-60)

Rear Side Marker Lamps Rear Side Reflex Reflectors

LIGHTS & ELECTRICAL

MANDATORY REQUIREMENTS

4a

Front Side Marker Lamps

4b

Front Side Reflex Reflectors

(P2,PC* OR P3, PC2) *photometrically certified at installation angle

(A)

(P2,PC* OR P3, PC2) *photometrically certified at installation angle

(A)

Front and rear side marker lamps / side reflectors indicate vehicle’s presence and length

ADDITIONAL EQUIPMENT FOR TRAILERS EXCEEDING THE FOLLOWING PARAMETERS LENGTH 9.1M (30FT) OR LONGER DESCRIPTION

MANDATORY REQUIREMENTS

AREA

EQUIPMENT

(SAE LENS CODING)

FUNCTIONAL PURPOSE

MIN QNTY

COLOR

LOCATION

HEIGHT mm (in.) FROM GROUND

5a

Intermediate Side Marker Lamps

(P2 or P3)

Indicate presence of a long vehicle

2

Yellow

Each side near center - facing sideward

380(15) minimum

5b

Intermediate Side Reflex Reflectors

(A)

Indicate presence of a long vehicle

2

Yellow

Each side near center - facing sideward

380-1530 (15-60)

WWW.TEXTRAIL.COM

L-3

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL WIDTH 80” (2.032m) or WIDER DESCRIPTION AREA

EQUIPMENT

6

Rear Clearance Lamps

MANDATORY REQUIREMENTS

(SAE LENS CODING)

FUNCTIONAL PURPOSE

MIN QNTY

COLOR

LOCATION

HEIGHT mm (in.) FROM GROUND

(P2,PC* OR P3, PC2) *photometri-

Show vehicle’s width - MAY NOT be combined with tail lights

2

Red

At widest point-symmetrical-on the rear or near the rear facing rearward

As high as practicablemay be lower only if ID lamps are at the top

cally certified at installation angle

7

Rear Identification Lamps

8

Front Clearance Lamps

(P2 or P3)

(P2,PC* OR P3, PC2) *photometrically certified at installation angle

Indicate presence of a wide vehicle

3 (Exact)

Red

On the rear-center facing rearward-horizontally spaced 150mm (6in) to 300mm (12in) apart

In Canada: at the top - may be lower if door header narrower than 25mm. In USA: as high as practicable

Show vehicle’s width

2

Yellow

At widest point-symmetrical - as far forward as practicable - facing forward

As high as practicable

WIDTH 2.032M (80IN) OR WIDER AND GVWR 4536kg (10,000LB) OR MORE DESCRIPTION FUNCTIONAL PURPOSE

COLOR

LOCATION

HEIGHT mm (in.) FROM GROUND

Rear Upper Body Marking

Exactly 2 pairs of 300mm long strips

White

On the rear upper corner-facing rearward

At the top

Bumper Bar Marking

Continuous

Red & White

On the rear bumper bar’s horizontal

No requirement

AREA

EQUIPMENT

9

10

(SAE LENS CODING)

MANDATORY REQUIREMENTS

DOT-C, DOTC2, DOT-C3, or DOT-C4 11

Rear Lower Marking

Continuous

Red & White see options

On the rear - full width of the vehicle - facing rearward

As horizontal as practicable and as close as practicable to the range of 375 to 1525mm from the ground

12

Side Marking

See location

Red & White see options

Each side - facing

As horizontal as practicable to the range of 375 to 18525mm from the ground

OPTIONS

Reflectors may not be required if they are replaced, in their required location. OPTIONAL IN CANADA

Rear lower body and side conspicuity treatment may also be solid white, solid yellow, or white & yellow

See diagrams on page L-5 & L-6

WWW.TEXTRAIL.COM

L-4

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

NOTE: This information is provided as guidance only. Tex Trail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada).


LIGHTS & ELECTRICAL NOTE: This information is provided as guidance only. Tex Trail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada).

LIGHTS & ELECTRICAL

See chart on page L-3

WWW.TEXTRAIL.COM

L-5

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL

LIGHTS & ELECTRICAL

NOTE: This information is provided as guidance only. Tex Trail encourages all of our customers to check with your local and federal governing agencies for changes to this guidance. State or Provincial regulations, where they may apply, have not been included. This table summarizes lighting equipment requirements contained in Federal/Canada Motor Vehicle Safety Standard 108. For complete compliance requirements consult Title 49 - Code of Federal Regulations-Section 571.108 (USA) or Section 108 of the Motor Vehicle Safety Regulations (Canada).

See chart on page L-4

WWW.TEXTRAIL.COM

L-6

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL LED - CLEARANCE & SIDE MARKER LIGHTS Part # Ref # 6-DIODE / 0.058A / 12.8V LIGHTS

Description

8100359

MCL-36AB

Square LED Marker/Clearance Light with Reflective Lens. Black stud mount base. Includes lead and ground wires. Screw-on replaceable lens. Color: Amber

8100484

MCL-36RB

Square LED Marker/Clearance Light with Reflective Lens. Black stud mount base. Includes lead and ground wires. Screw-on replaceable lens. Color: Red

6-DIODE / 0.087A / 12.8V LIGHTS 8100485

8100486

MCL-45AB

Bulls eye LED Marker / Clearance Light. Snap-on replaceable lens. Includes a single wire design that grounds through mounting hardware on 3” centers to a white base. Color: Amber

MCL-45RB

Bulls eye LED Marker / Clearance Light. Snap-on replaceable lens. Includes a single wire design that grounds through mounting hardware on 3” centers to a white base. Color: Red

15-DIODE / 0.109A / 12.8V LIGHTS 8100494

CBL-22AB

Sealed LED Triangular Cab Light. Includes lead and ground wires. Color: Amber

2-DIODE / 0.46A / 12.8V LIGHTS 8100278

MCL-13A2B

Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Amber

8100277

MCL-13R2B

Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Red

8100510

MCL-CA2B

Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Clear with Amber Diodes

8100511

MCL-13CR2B

Mini Sealed LED Marker/Clearance Light. Includes lead and ground wires. Color: Clear with Red Diodes

8100512

UCL-13C2PG

Mini Sealed LED Utility Light. Includes lead and ground wires. Color: Clear with Clear Diodes

8-DIODE / 0.61A / 12.8V LIGHTS MCL-21AB

2” Beehive Sealed LED Marker/Clearance or Rear Tracking Light. Requires 2-prong plug. Color: Amber

8100487

MCL-21RB

2” Beehive Sealed LED Marker/Clearance or Rear Tracking Light. Requires 2-prong plug. Color: Red

LIGHTS & ELECTRICAL

8100427

6-DIODE / 0.054A / 12.8V LIGHTS 8100375

MCL-31AB

Oval LED Marker/Clearance Light with Reflective Lens. Includes lead and ground wires, and white mounting base. Color: Amber

8100376

MCL-31RB

Oval LED Marker/Clearance Light with Reflective Lens. Includes lead and ground wires, and white mounting base. Color: Red

WWW.TEXTRAIL.COM

L-7

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL LED - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part #

Description

MCL-55AB

2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 4-diode 0.97A / 12.8V Color: Amber

MCL-55RB

2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 3-diode 0.108A/12.8V Color: Red

MCL-57AB

2-1/2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 4-diode 0.96A / 12.8V Color: Amber

8100513

MCL-57RB

2-1/2” Round Sealed Multiple Diode LED Marker / Clearance Light. Requires mounting grommet and industry standard 2-prong plug. 3-diode 0.108A/12.8V Color: Red

8100454

MCL-65ARB

Thin Line Sealed LED Fender Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V.

8100473

MCL-67ARB

Thin Line Sealed LED Fender Light. Includes mounting bracket and plug. 6-diode 0.048A / 12.8V.

Part #

Ref #

8100011

MCL-75AB

Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 4-diode 0.048A / 12.8V Color: Amber

8100013

MCL-75RB

Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 4-diode 0.048A / 12.8V Color: Red

8100452

MCL-65AB

Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Amber

8100453

MCL-65RB

Thin Line Sealed LED Marker/Clearance Light. Requires mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Red

8100377

81000378

8100514

LIGHTS & ELECTRICAL

Ref #

Description

8100004

Thin Line Sealed LED Marker/Clearance Light. Requires MCL-65CAB mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Clear with Amber Diodes

8100005

Thin Line Sealed LED Marker/Clearance Light. Requires MCL-65CRB mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Clear with Red Diodes

8100474

MCL-67AB

Thin Line Sealed LED Marker/Clearance Light. Includes mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Amber

8100472

MCL-67RB

Thin Line Sealed LED Marker/Clearance Light. Includes mounting bracket and plug. 6-diode 0.048A / 12.8V Color: Red

WWW.TEXTRAIL.COM

L-8

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL LED - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part #

Ref #

Description

8100530

MCL-86AB

Armored Die Cast LED Marker/Clearance Light. Includes gasket and lead and ground wires. 6-diode 0.160A / 12.8V Color: Amber

8100529

MCL-86RB

Armored Die Cast LED Marker/Clearance Light. Includes gasket and lead and ground wires. 6-diode 0.160A / 12.8V Color: Red

8100460

AL-91AB

Mini Thin Line Sealed LED Marker/Clearance Light. Requires industry standard 2-prong plug and mounting bracket. 3-diode 0.051A / 12.8V Color: Amber

8100461

AL-91RB

Mini Thin Line Sealed LED Marker/Clearance Light. Requires industry standard 2-prong plug and mounting bracket. 3-diode 0.051A / 12.8V Color: Red

Part #

Ref #

8100524

MCL-91AB

Mini Thin Line Sealed LED Marker/Clearance Light. Includes chrome self-grounding mounting base, gasket and 12” single lead wire. 3-diode 0.051A / 12.8V Color: Amber

8100392

MCL-91RB

Mini Thin Line Sealed LED Marker/Clearance Light. Includes chrome self-grounding mounting base, gasket and 12” single lead wire. 3-diode 0.051A / 12.8V Color: Red

8100431

MCL-96AB

Mini Thin Line Sealed LED Marker/Clearance Light. Includes black self-grounding hard wired mounting base with gasket. 3-diode 0.051A / 12.8V Color: Amber

8100362

MCL-96RB

Mini Thin Line Sealed LED Marker/Clearance Light. Includes black self-grounding hard wired mounting base with gasket. 3-diode 0.051A / 12.8V Color: Red

Description

LED - LIGHT BARS Ref #

Description

8100371

STL-76RB

Thin Line Dual Lens Sealed LED Stop / Turn / Tail Light with replaceable red snap-on lens. Clear polycarbonate inner lens is sonic welded to housing. Requires ground wire. 11-diode 0.275/0.022A / 12.8V Color: Red

8100490

MCL-78RB

Thin Line LED Identification Light Bar for over 80” applications. Includes lead and ground wire. 3-diode 0.022A / 12.8V Color: Red

8100491

MCL-88RCB

Thin Line LED Identification Light Bar for over 80” applications. Includes lead and ground wire. 3-diode 0.022A / 12.8V Color: Clear with Red Diodes

8100490

8100491

WWW.TEXTRAIL.COM

L-9

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

Part #


LIGHTS & ELECTRICAL LED - LIGHT BARS (Continued) Part #

Ref #

Description

8100363

MCL-93RB

Sealed LED Identification Light Bar with three (3) replaceable Mini Thin Line Sealed LED Marker/ Clearance Lights (8100461) on a black molded housing for over 80” applications. Includes ground wire and 50” lead wire. 9-diode 0.051A / 12.8V Color: Red

8100489

MCL-84RB

Sealed LED Identification Light Bar with three (3) replaceable Mini Thin Line Sealed LED Marker/ Clearance Lights (8100461) on a polished, stainless steel housing for over 80” applications. Includes ground wire and 50” lead wire. 9-diode 0.051A / 12.8V Color: Red 8100363

8100489

8100428

MCL-97RB

Sealed LED Identification Light Bar with three (3) sealed LED marker/clearance lights on a stainless steel housing for over 80” applications. Single wire design grounds through mounting hardware. 9-diode 0.058A / 12.8V Color: Red

LED - STOP / TURN & TAIL LIGHTS

LIGHTS & ELECTRICAL

Part # Ref # TRAILERS OVER 80”

Description

8100365

STL-2RB

Universal stud-mounted stop/turn/tail LED light for over 80” applications. 7-function: stop, turn, tail, rear reflex, side marker, rear clearance and side reflex. Includes screw-on replaceable lens with gasket. Mounts on 2” centers and grounds through mounting studs. 18-diode 0.268/0.059A / 12.8V Color: Red

8100366

STL-3RB

Same as 8100365 plus 8th function is a license illuminator. 23-diode 0.268/0.114A / 12.8V Color: Red

Part # Ref # TRAILERS UNDER 80”

Description

8100368

STL-8RB

Universal stud-mounted stop/turn/tail LED light for under 80” applications. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens. Mounts on 2” centers and includes grounds wire. 16-diode 0.259/0.062A / 12.8V Color: Red

8100369

STL-9RB

Same as 8100368 plus 7th function is a license illuminator. 21-diode 0.254/0.112A / 12.8V Color: Red

WWW.TEXTRAIL.COM

L-10

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL LED - STOP / TURN & TAIL LIGHTS (Continued) Part # Ref # TRAILERS OVER 80”

Description

8100517

STL-16RB

Waterproof universal mount 3-wire LED stop/turn/tail light for over 80” applications. 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens and separate ground wire. 18-diode 0.279/0.070A / 12.8V Color: Red

8100518

STL-17RB

Same as 8100517 plus 8th function is a license illuminator. 22-diode 0.279/0.121A / 12.8V Color: Red

8100519

STL-33RB

Rectangular Sealed LED Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and 3-prong plug. 12-diode 0.405/0.038A / 12.8V Color: Red

8100522

STL-34RB

Rectangular Sealed LED Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. 12-diode 0.405/0.038A / 12.8V Color: Red

Part #

Ref #

Description

8100482

STL-72AB

6” Oval Sealed LED Parking/Rear Turn Signal Light for flush mount application. Requires industry standard 3-prong plug and mounting grommet. 10-diode 0.275/0.042A / 12.8V Color: Amber+

8100367

STL-72RB

6” Oval Sealed LED Stop/Turn/Tail Light for flush mount application. Requires industry standard 3-prong plug and mounting grommet. 10-diode 0.243/0.046A / 12.8V Color: Red

8100482

8100367

STL-78AB

6” Oval Sealed LED Parking/Rear Turn Signal Light for flange mount application. Does not require panel cutout. Includes 3-wires for installation. 10-diode 0.275/0.042A / 12.8V Color: Amber

8100372

STL-78RB

6” Oval Sealed LED Stop/Turn/Tail Light for flange mount application. Does not require panel cutout. Includes 3-wires for installation. 10-diode 0.243/0.046A / 12.8V Color: Red

8100526

WWW.TEXTRAIL.COM

8100372 L-11

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

8100526


LIGHTS & ELECTRICAL LED - STOP / TURN & TAIL LIGHTS (Continued) Part # 8100483

8100496

8100276

8100370

8100329

8100271

Ref #

Description

STL-42AB

4” Round Sealed LED Parking/Rear Turn Signal Light for flange mount application. Requires industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber

STL-42RB

4” Round Sealed LED Stop/Turn/Tail Light for flange mount application. Requires industry standard 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red

STL-43AB

4” Round Sealed LED Parking/Rear Turn Signal Light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber

STL-43RB

4” Round Sealed LED Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red

STL-43AKB

4” Round Sealed LED Parking/Rear Turn Signal Light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. 10-diode 0.310/0.046A / 12.8V Color: Amber

STL-43RKB

4” Round Sealed LED Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. 10-diode 0.413/0.026A / 12.8V Color: Red

LED - LICENSE, BACK-UP & UTILITY LIGHTS Part #

LIGHTS & ELECTRICAL

8100374

8100373

8100020

Ref #

Description

BUL-72CB

6” Oval Sealed LED Clear Utility Light for flush mount application. Requires industry standard 2-prong plug and mounting grommet. Not certified for backup light function. 10-diode 0.080A / 12.8V

BUL-78CB

6” Oval Sealed LED Clear Utility Light for flange mount application. Includes 3-wires for installation. Does not require panel cutout. Not certified for backup light function. 10-diode 0.080A / 12.8V

BUL-43CB

4” Round Sealed LED Clear Utility Light for flush mount application. Requires industry standard 2-prong plug and mounting grommet. Not certified for backup light function. 10-diode 0.080A / 12.8V

WWW.TEXTRAIL.COM

L-12

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL LED - LICENSE, BACK-UP & UTILITY LIGHTS (Continued) Part #

Ref #

Description

8100364

LPL-31CB

Mini LED Polished Chrome-plated License Plate Light. Includes lead and ground wires. 2-diode 0.027A / 12.8V

8100495

LPL-41CB

Armored LED Polished Chrome-plated License Plate Light. Includes lead and ground wires. 5-diode 0.054A / 12.8V

LED - LIGHT & PIGTAIL Part #

Ref #

Description

LED Kit includes one (1) 6” Oval Sealed LED Stop/Turn/Tail Light for flush mount application, the industry standard 3-prong right angle 90° plug, and a mounting grommet. 8100367-2 STL-74RBK Pictured in lit and unlit mode for demonstration purposes. 10-diode 0.243/0.046A / 12.8V Call for pricing. LED Kit includes one (1) 6” Oval Sealed LED Stop/Turn/Tail Light for flush mount application, the industry standard 3-prong right angle 90° plug, and a mounting grommet. 8100367-3 STL-74RKB Pictured in lit and unlit mode for demonstration purposes. 10-diode 0.243/0.046A / 12.8V Call for pricing.

LIGHTS & ELECTRICAL

INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS Part #

Ref #

8100139

MC-11AB

8100138

MC-11RB

Description Mini Rectangular Marker/Clearance Light. Features snap-on lens, a durable plastic base and single wire design that grounds through mounting hardware. Color: Amber Mini Rectangular Marker/Clearance Light. Features snap-on lens, a durable plastic base and single wire design that grounds through mounting hardware. Color: Red

WWW.TEXTRAIL.COM

L-13

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part # 8100443

8100444

8100092

MC-36AB

MC-36RB

MC-35AB

Color

Description

Amber

Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Black plastic molded housing. Screw-on replaceable lens. Color: Amber

Red

Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Black plastic molded housing. Screw-on replaceable lens. Color: Red

Amber

Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Ear-mount black plastic molded housing. Screw-on replaceable lens. Color: Amber

8100094

MC-35RB

Red

Square Marker/Clearance Light with Reflective Lens. Single wire design grounds through mounting stud. Ear-mount black plastic molded housing. Screw-on replaceable lens. Color: Red

8100379

MC-37AB

Amber

Square Marker/Clearance Light with Reflective Lens and Side Reflex. Single wire design grounds through mounting stud. Color: Amber

Amber

Oval Marker/Clearance Light with Reflective Lens. Includes a replaceable snap-on lens and a single wire design that grounds through the mounting hardware. Mounts on 3” centers.

Red

Oval Marker/Clearance Light with Reflective Lens. Includes a replaceable snap-on lens and a single wire design that grounds through the mounting hardware. Mounts on 3” centers.

8100497

8100498

8100499

LIGHTS & ELECTRICAL

Ref #

8100500

8100437

8100436

MC-38AB

MC-38RB

MC-42AB

MC-42RB

MC-44AB

MC-44RB

Amber

Double Bulls eye Marker/Clearance Light with black base. Includes a two-bulb design with a replaceable, snap-on lens. Grounds through mounting hardware on 3” centers. Color: Amber

Red

Double Bulls eye Marker/Clearance Light with black base. Includes a two-bulb design with a replaceable, snap-on lens. Grounds through mounting hardware on 3” centers. Color: Red

Amber

4” Rectangular Marker/Clearance Light with Reflective Lens. Includes a replaceable, snap-on lens and the lead wire and grounding wire. Mounts on 3” centers. Color: Amber

Red

4” Rectangular Marker/Clearance Light with Reflective Lens. Includes a replaceable, snap-on lens and the lead wire and grounding wire. Mounts on 3” centers. Color: Red

WWW.TEXTRAIL.COM

L-14

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part #

Ref #

Color

8100432

MC-66AB

Amber

4” Oval Two-Bulb Marker/Clearance Light. Includes a replaceable, snap-on lens, and the lead and ground wire. Color: Amber

8100433

MC-66RB

Red

4” Oval Two-Bulb Marker/Clearance Light. Includes a replaceable, snap-on lens, and the lead and ground wire. Color: Red

Amber

3-1/2” Thinline Oblong Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through hardware. Color: Amber 3-1/2” Thinline Oblong Marker/Clearance Light. Includes a replaceable, snap-on lens, a gasket, and a single wire design that mounts through hardware. Color: Red

8100292

MC-68AB

Description

MC-68RB

Red

8100290

MC-52AB

Amber

2” Sealed Flange Mount Round Marker / Clearance Light. Requires industry standard 2-prong plug.

8100291

MC-52RB

Red

2” Sealed Flange Mount Round Marker / Clearance Light. Requires industry standard 2-prong plug.

8100380

MC-53AB

Amber

2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug.

8100381

MC-53RB

Red

2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug.

8100501

MC-55AB

Amber

2-1/2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug.

8100502

MC-55RB

Red

2-1/2” Sealed Round Marker/Clearance Light. Requires mounting grommet and industry standard 2-prong plug.

8100458

MC-57AB

Amber

2-1/2” Sealed Round Marker/Clearance Light with Reflective Lens. Requires mounting grommet and industry standard 2-prong plug.

8100459

MC-57RB

Red

2-1/2” Sealed Round Marker/Clearance Light with Reflective Lens. Requires mounting grommet and industry standard 2-prong plug.

WWW.TEXTRAIL.COM

L-15

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

8100293


LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part #

Ref #

Color

8100102

MC-58AB

Amber

8100103

MC-58RB

Red

2-1/2” Round Marker/Clearance Light. Single wire design grounds through mounting hardware. Includes a replaceable, snap-on lens. Color: Amber 2-1/2” Round Marker/Clearance Light. Single wire design grounds through mounting hardware. Includes a replaceable, snap-on lens. Color: Red Sealed Dual-Bulb Rectangular Fender Light that functions as an amber front clearance light and a red rear clearance light for over 80” applications. Mounts on 3” centers. Requires mounting bracket and plug. Color: Amber/Red

8100157

MC-65ARB

Amber/Red

8100175

MC-65AB

Amber

Sealed Double-Bulb Marker/Clearance Light. Requires mounting bracket and plug assembly. Color: Amber

8100174

MC-65RB

Red

Sealed Double-Bulb Marker/Clearance Light. Requires mounting bracket and plug assembly. Color: Red

8100038

MC-67AB

Amber

Sealed Double-Bulb Marker/Clearance Light. Includes mounting bracket and plug assembly. Color: Amber

8100039

MC-67RB

Red

Sealed Double-Bulb Marker/Clearance Light. Includes mounting bracket and plug assembly. Color: Red

8100228

8100229 LIGHTS & ELECTRICAL

Description

BA-65ARLB

BA-65ARRB

Amber/Red

Pre-wired Fender Light Assembly that functions as a amber front clearance light and a red rear clearance light for over 80” applications. Mounts on top or side of most fenders to mark the widest point on the trailer. Assembly includes (1) 8100175, (1) 8100174, and a fender mount assembly. Left side assembly.

Red/Amber

Pre-wired Fender Light Assembly that functions as a amber front clearance light and a red rear clearance light for over 80” applications. Mounts on top or side of most fenders to mark the widest point on the trailer. Assembly includes (1) 8100175, (1) 8100174, and a fender mount assembly. Right side assembly.

WWW.TEXTRAIL.COM

L-16

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - CLEARANCE & SIDE MARKER LIGHTS (Continued) Part #

Ref #

Description

8100104

A-91AB

Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Amber

8100105

A-91RB

Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Red

8100391

MC-92AB

Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Amber

8100448

MC-92RB

Mini Thin Line Sealed Marker/Clearance Light. Includes single-wire male plug and black mounting bracket. Color: Red

8100098

MC-81AB

Chrome Plated Marker/Clearance Light. Includes a replaceable, snap-on lens and a single wire design that mounts through mounting hardware. Color: Amber

8100099

MC-81RB

Chrome Plated Marker/Clearance Light. Includes a replaceable, snap-on lens and a single wire design that mounts through mounting hardware. Color: Red

8100081

J-550-A

Sealed Steel Armored Marker/Clearance Light. Requires a replaceable, snap-on lens, a gasket, and a single wire design that mounts through mounting hardware. Color: Amber

81000153

J-550-R

Sealed Steel Armored Marker/Clearance Light. Requires a replaceable, snap-on lens, a gasket, and a single wire design that mounts through mounting hardware. Color: Red

INCANDESCENT LIGHTING - LIGHT BARS Ref #

Description

8100294

MC-93RB

Sealed Identification Light Bar with three (3) replaceable Mini Thin Line Sealed Marker/Clearance Lights (8100105) on a black molded housing for over 80” applications. Includes ground wire and 50” lead wire. Color: Red

8100396

MC-77RB

Identification Light Bar with three (3) replaceable, snap-on Thin Line Oblong Marker/ Clearance Lights (8100293) on a white metal housing for over 80” applications. Includes ground wire and 50” lead wire. Color: Red

WWW.TEXTRAIL.COM

L-17

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

Part #


LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - LIGHT BARS (Continued) Part #

Ref #

Description

8100134

MC-99AB

Identification Light Bar with three (3) replaceable, snap-on Mini Marker/ Clearance Lights (8100139) on a white metal base. Single wire design grounds through mounting hardware. Includes 50” lead wire. Color: Amber

8100135

MC-99RB

Identification Light Bar with three (3) replaceable, snap-on Mini Marker/ Clearance Lights (8100139) on a white metal base. Single wire design grounds through mounting hardware. Includes 50” lead wire. Color: Red

INCANDESCENT LIGHTING - STOP / TURN & TAIL LIGHTS Part # Ref # TRAILERS OVER 80”

Description

8100389

ST-2RB

Universal stud-mounted stop/turn/tail light for over 80” applications. 7-function: stop, turn, tail, rear reflex, side marker, rear clearance and side reflex. Includes screw-on replaceable lens with gasket. Mounts on 2” centers and grounds through mounting studs. Color: Red

8100390

ST-3RB

Same as 8100389 plus 8th function is a license illuminator. Color: Red

8100170

ST-4RB

Same as 8100389 plus submersible.

8100191

ST-5RB

Same as 8100390 plus submersible.

LIGHTS & ELECTRICAL

Part # Ref # TRAILERS UNDER 80”

Description

8100477

ST-8RB

Universal stud-mounted stop/turn/tail light for under 80” applications. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens. Mounts on 2” centers and includes grounds wire. Color: Red

8100478

ST-9RB

Same as 8100477 plus 7th function is a license illuminator. Color: Red

TRAILERS OVER 80” 8100196

ST-16RB

Waterproof universal mount 3-wire stop/turn/tail light for over 80” applications. 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex. Includes screw-on replaceable lens and separate ground wire. Color: Red

8100195

ST-17RB

Same as 8100196 plus 8th function is a license illuminator. Color: Red

WWW.TEXTRAIL.COM

L-18

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL INCANDESCENT LIGHTING - STOP / TURN & TAIL LIGHTS (Continued) Part # 8100525

8100533

8100402

Ref#

Color

ST-33AB

ST-33RB

ST-34RB

Description

Amber

Rectangular Sealed Parking / Rear Turn Signal for flush mount application. Requires mounting grommet and 3-prong plug. Color: Amber

Red

Rectangular Sealed Stop/Turn/Tail Light for flush mount application. Requires mounting grommet and 3-prong plug. Color: Red

Red

Rectangular Sealed Stop/Turn/Tail Light for flush mount application. Includes mounting grommet and 3-prong plug. Color: Red

8100520

ST-24RB

Red

4-3/8” Round stud-mounted, black polymer housed light. 6-function: stop, turn, tail, rear reflex, side marker, and side reflex. Includes snap-on replaceable lens. Mounts on 2” centers and grounds through two 1/4” studs.

8100509

ST-25RB

Red

Same as 8100520 plus 7th function is a license illuminator.

Part #

Ref #

Description

ST-60RB

8100108

ST-60RS

Same as 8100418 except Clam Packaged. Color: Red

8100187

ST-40RB

4.5” Round flush mount stop/turn/tail light with acrylic lens, durable black steel housing and snap-in lens ring. Includes 2 wire leads and grounds through mounting hardware. Color: Red

8100314

A-40SRB

Snap Ring for mounting 4.5” round lights. Snap-in bracket.

8100080

ST-44AB

4” Sealed round flush mount parking and rear turn Signal light. Includes mounting grommet and industry standard 3-prong plug. Color: Amber

8100521

ST-44RB

4” Sealed round flush mount stop/turn/tail light. Includes mounting grommet and industry standard 3-prong plug. Color: Red

8100165

ST-45RB

4” Sealed round flush mount stop/turn/tail light. Requires mounting grommet and industry standard 3-prong plug. Color: Red

8100471

ST-46RB

4” Sealed round flush mount stop/turn/tail light with reflex lens. Requires mounting grommet and industry standard 3-prong plug. Color: Red

WWW.TEXTRAIL.COM

L-19

LIGHTS & ELECTRICAL

8100546

Universal stud-mounted stop/turn/tail light for surface mount application. Functions: stop, turn, tail, back-up and license light. Grounds through mounting studs. Includes screw-on replaceable lens. Mounts on three 1/4” studs. Color: Red

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL INCANDESCENT - STOP / TURN & TAIL LIGHTS (Continued) Part #

Ref #

Description

8100145

ST-51RS

Part #

Ref #

8100386

ST-70RB

6” Sealed Oval stop/turn/tail light for flush mount application. Requires mounting grommet and industry standard 3-prong plug. Color: Red

8100445

ST-74RB

6” Sealed Oval stop/turn/tail light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. Color: Red

8100176

ST-74AB

6” Sealed Oval parking / rear turning Signal light for flush mount application. Includes mounting grommet and industry standard 3-prong plug. Color: Amber

Pedestal mount 3-function stop/turn/tail light. Includes snap-on, replaceable lens on single face plastic housing. Grounds through mounting post. Color: Red

Description

INCANDESCENT - TURN LIGHTS Part #

Ref #

Description

8100183

ST-75AB

6” Sealed Oval mid-ship turn Signal and side marker with reflex lens. Requires mounting grommet and industry standard 3-prong plug. Color: Amber

8100182

ST-77AB

6” Sealed Oval mid-ship turn Signal and side marker with reflex lens. Includes mounting grommet and industry standard 3-prong plug. Color: Amber

INCANDESCENT - LICENSE, BACK-UP & UTILITY LIGHTS

LIGHTS & ELECTRICAL

Part #

Ref #

Description

8100185

LP-11CB

Chrome Plated Snap-in License Plate / Utility / Dash Light with replaceable bulb. Mounts in 1-1/4” diameter hole. Single wire design grounds through mounting hardware. Two units required for legal license illumination.

8100090

LP-21CB

Chrome Plated Armored Steel License Plate Light with replaceable bulb. Mounts on 2” centers. Single wire design grounds through mounting hardware.

8100385

LP-31CB

Chrome Plated License Plate Light with replaceable bulb. Mounting ears for surface mounting on 2” centers. Includes a water resistance gasket, and lead and ground wires.

8100506

LP-51CB

License Plate Light with gray poly coated housing and replaceable bulb. Mounting ears for surface mount on 3-1/4” centers. Includes weather-tight gasket seal and a single wire design that grounds through mounting hardware. Hardware separate.

8100132

LP-52CB

Same as 8100506 plus with a black steel license plate bracket.

WWW.TEXTRAIL.COM

L-20

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL INCANDESCENT - LICENSE, BACK-UP & UTILITY LIGHTS Part #

Ref #

Description

8100527

BU-33CB

Sealed Flush Mount Rectangular Back-Up Light. Requires industry standard 2-prong plug and mounting grommet.

8100255

BU-45CB

Sealed 4” Round Flush Mount Back-Up Light. Requires industry standard 2-prong plug and mounting grommet.

8100256

BU-44CB

Sealed 4” Round Flush Mount Back-Up Light. Includes industry standard 2-prong plug and mounting grommet.

8100465

BU-70CB

Sealed 6” Oval Flush Mount Back-Up Light. Requires industry standard 2-prong plug and mounting grommet.

8100136

BU-74CB

Sealed 6” Oval Flush Mount Back-Up Light. Includes industry standard 2-prong plug and mounting grommet.

INCANDESCENT - LIGHT KITS Part #

Ref #

Description

8100118

TL-27BK

Light Kit includes (1) 8100477 universal stud-mounted red stop/turn/tail 6-function light, (1) 8100478 universal studmounted red stop/turn/tail 7-function light, (2) 8100443 square amber marker/clearance lights with reflective lenses, a rust proof angled license plate bracket and a 20’ wiring harness.

8100118-01

TL-270

Same as 8100118 in

8100119

TL-28RK

Same as 8100118 in clam package.

8100120

TL-29BK

Same as 8100118 except with a 25’ wiring harness.

8100592

TL-9RK

Same as 8100120 in clam package.

TL-21RK

Towing Light Kit includes (2) Magnetic mount round red stop/turn/tail lights and 25-feet of wiring harness with a 4-flat plug.

WWW.TEXTRAIL.COM

L-21

LIGHTS & ELECTRICAL

8100197

Packaging

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL SPECIALITY LIGHTING - DOME LIGHTS Part #

Ref #

Color

Description

8100116

IL-21CB

Clear

Rectangular Weatherproof Interior / Exterior Surface Mount Dome Light with a replaceable, snap-on polycarbonate lens. Mounts on 3.5” centers. Includes ground and lead wires and an on/off switch.

8100226

IL-61CB

Clear

Round Surface Mount Interior Dome Light with On-Off Switch. Aluminum base with translucent lens. Single wire design grounds through mounting base.

8100253

RV-PL1C

Clear

Rectangular Surface Mount Utility / Porch Light. White housing with separate ground wire. Includes a replaceable, snap-on lens.

8100037

RV-PL3C

Clear

Rectangular Surface Mount Utility / Porch Light with On-Off Switch. White housing with separate ground wire. Includes a replaceable, snap-on lens.

8100257

RV-PL7C

Clear

Oval Surface Mount Utility / Porch Light with On-Off Switch. White housing with separate ground wire. Includes a replaceable, snap-on lens.

LIGHTS & ELECTRICAL

SPECIALITY LIGHTING - TRACTOR, HALOGEN & TOW LIGHTS Part #

Ref #

Description

8100198

TL-35FS

Clear

3” x 5” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light.

8100260

TL-35TB

Clear

3” x 5” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. Clam Package.

8100251

TL-46FS

Clear

4” x 6” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light.

8100652

TL-46TS

Clear

4” x 6” Utility / Tractor Flood Beam Heavy-duty Light. Polycarbonate black housing including mounting hardware and a 55-watt halogen light. Clam Package.

8100281

TL-10CB

Clear

5” Round Utility / Tractor Flood Beam Heavy-duty Light. Shock proof rubber housing with sealed beam bulb. 6” lead and ground wires. Adjustable plated steel bracket. Universal 5/16” mounting post.

8100012

RB-10A

Amber

Amber Rotary Beacon / Warning Light. Includes 12-Volt plug with coil cord.

WWW.TEXTRAIL.COM

L-22

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - LIGHT BRACKETS Part #

Ref #

Finish

Description

8100148

1049R

Raw

Steel Light Protector Right Hand. For Stop/Turn/Tail

8100149

1052L

Raw

Steel Light Protector Left Hand with license light cutout. For Stop/Turn/Tail Light.

5350210

8128L

Raw

Steel Light Protector Left Hand. For Stop/Turn/Tail Light. Cut-out for 2” Side Marker.

5350211

8128R

Raw

Steel Light Protector Right Hand. For Stop/Turn/Tail Light. Cut-out for 2” Side Marker.

8147

Raw

5350371

8101

Raw

Steel Z-Style Light Bracket. For Big Tex Dump Trailers.

5350392

1131

Raw

Steel 5” Clearance / Marker Light Bracket.

5350085

8122

Raw

Steel Light Bracket. 12 GA. For stud mount clearance / marker light.

5350077

8217

Raw

Steel Weld-On Oval Light Bracket. 4” tall x 8-1/2” long.

8100143

BK-70BB

Black

Black Powder Coated Steel Oval Light Bracket. For 6” oval lights. Requires grommet part number 8100387 for installation. Color: Black

8100142

BK-45BB

Black

Black Powder Coated Steel Round Light Bracket. For 4” round lights. Requires grommet part number 8100430 for installation. Color: Black

WWW.TEXTRAIL.COM

L-23

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

5350082

Steel Weld-On Light Plus License Plate Bracket. For Standard Stop/Turn/Tail Light. Bracket is 5-3/4” tall x 14 Gauge x 7-3/4” long inverted “L”. Elongated slot for stud mount lights. Two holes for standard dimension license plate and bolts.


LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - LIGHT BRACKETS Part #

Ref #

Color

8100231

LP-5SB

Black

Description Rust Proof Straight Polymer License Plate Bracket. For use with stud mount license lights.

8100384

LP-15SB

Zinc

Zinc Plated Heavy Duty Steel License Plate Bracket. For use with stud mount license lights.

8100019

BK-57BB

Gray

Molded all weather plastic adapter allows 2-1/2” sealed lights to be surface mounted. Requires grommet part number 8100249 for installation.

8100314

A-40SRB

Gray

Snap Ring for mounting 4.5” round lights. Snap-in bracket.

8100015

A-65PB

Black

Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire.

8100014

A-66PB

Gray

Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire.

8100285

A-67CB

Chrome

Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, plug and molded lead wire.

8100031

A-65PBPG

Black

Molded bracket and plug surface mount kits. Single wire design grounds through mounting hardware. Includes bracket, 180 male molded connector and molded lead wire.

8100463

A-91BB

Black

Molded all weather black plastic surface mount light bracket. Intended for single wire molded plug part number 8100001. Includes gasket for weather-tight seal.

8100018

A-91CB

Chrome

Molded all weather black plastic surface mount light bracket. Intended for single wire molded plug part number 8100001. Includes gasket for weather-tight seal.

Chrome

Molded all weather black plastic surface mount light bracket. Intended for two wire molded plug part numbers 8100383 (straight) or 8100404 (right angle). Includes gasket for weather-tight seal.

LIGHTS & ELECTRICAL

8100017

A-91OB

MOUNTING ACCESSORIES - DECORATIVE LIGHT BRACKETS Part #

Ref #

Color

Description

8100107

A-45CGB

Chrome

Chrome Cover Ring for 4” Grommets Mount Lights. Includes two screws for installation.

8100106

A-42FCB

Chrome

Chrome Cover Ring Flange for 4” Round Flange Mount Lights. Includes three screws for installation.

WWW.TEXTRAIL.COM

L-24

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - DECORATIVE LIGHT BRACKETS Part #

Ref #

Color

Description

8100030

A-13C2B

Chrome

Snap-on Chrome Ring for enhancing appearance of Mini Sealed LED Marker/ Clearance Lights. Features polished, chromeplated finish.

8100451

A-78CB

Chrome

Snap-on Chrome Ring for enhancing appearance of 6” Oval Sealed LED Lights.

8100091

BK-42CB

Chrome

Chrome Bracket for Oblong Marker / Clearance Lights. Polished, chrome-plated finished steel guard for added protection of lights.

MOUNTING ACCESSORIES - GROMMETS Part #

Ref #

Description

8100382

A-54GB

2” Open Back Flush Mount Black PVC Grommet. Requires industry standard 2-prong plug for electrical connection (8100383 or 8100404) and grounding screws. 2-5/16” mounting hole required.

8100049

A-54GK

2” Open Back Flush Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 2-5/16” mounting hole required.

8100457

A-55GB

2-1/2” Open Back Flush Mount Black PVC Grommet. Requires industry standard 2-prong plug for electrical connection (8100383 or 8100404) and grounding screws. 3” mounting hole required.

8100204

A-55GK

2-1/2” Open Back Flush Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 3” mounting hole required.

8100249

A-57GK

2-1/2” Open Back Recessed Mount Black PVC Grommet. Includes industry standard 2-prong straight plug (8100383) for electrical connection and grounding screws. 2-25/32” mounting hole required.

Part #

Ref #

8100048

J-573-GM

Black PVC Grommet allows lights to be flush mounted. Provides shock mount to lengthen lamp life. Requires industry standard 2-prong plug (8100383 or 8100404) for electrical connection.

8100280

A-13G2B

Gasket provides weather tight seal for lights.

8100523

A-33GB

Black PVC Grommet allows flush mounting of the ST/STL-33 & 34 Stop, Tail & Turn lights. Provides shock mount to lengthen bulb life.

Description

L-25

LIGHTS & ELECTRICAL

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL MOUNTING ACCESSORIES - GROMMETS (Continued) Part #

Ref #

Description

8100387

A-70GB

Black PVC Grommet for 6” Oval Lights to be flush mounted. Provides shock mount to lengthen bulb life.

8100430

A-45GB

Black PVC Grommet for 4” Round Lights to be flush mounted in 4-1/2” cut-out. Provides shock mount to lengthen bulb life.

MOUNTING ACCESSORIES - PERMIT / CERTIFICATE HOLDER Part # 8400525

Ref # 46

Description Round Certificate / Permit Holder. Keeps permits or license clean and dry in any weather. Cam-on translucent cover has gasket seal. High impact plastic. Tension spring holds documents in place with cover removed.

LIGHTS & ELECTRICAL

PLUGS, PIGTAILS & LEAD WIRES Part # Ref #

Description

8100001

A-91LW

Single Wire Plug with 12” lead.

8100383

A-46PB

Two-Prong Straight Molded Plug with 6” leads for sealed clearance/marker lights. Includes #10 ring terminal on ground wire; hot wire is bare.

8100404

A-49PB

Two-Prong Right Angle Molded Plug with 6” leads for sealed clearance/ marker lights. Includes #10 ring terminal on ground wire; hot wire is bare.

8100403

A-45CB

Two-Prong Straight Molded Plug with 6” leads for single contact sealed lights. Ideal for use with back-up lights. Includes #10 ring terminal on ground wire; hot wire is bare.

8100388

A-45PB

Three-Prong Straight Molded Plug with 6” leads for double contact sealed lights. Ideal for use with stop/turn/tail lights. Includes #10 ring terminal on ground wire; hot wire is bare.

8100532

A-47PB

Three-Prong Right Angle Molded Plug with 6” leads for double contact sealed lights. Ideal for use with stop/turn/tail lights. Includes #10 ring terminal on ground wire; hot wire is bare.

WWW.TEXTRAIL.COM

L-26

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL - ADAPTER, PLUGS & SOCKETS WIRING GUIDE GREEN Right Turn & Brake

WIRING IDENTIFICATION BY COLOR: YELLOW BROWN WHITE RED

BLUE

PURPLE

Left Turn & Brake

Electric Brakes

Back-Up Lights

Tail/Marker Lights

Ground

Auxiliary Power

Tow Vehicle Side

Trailer Side

Tow Vehicle Side

Trailer Side

LIGHTS & ELECTRICAL

NOTE: ILLUSTRATIONS REPRESENT A REAR VIEW OF CONNECTORS. NOTE: IDENTIFY THE WIRES ON YOUR VEHICLE AND TRAILER BY FUNCTION ONLY. COLOR IS NOT STANDARD AMONG ALL MANUFACTURERS. THIS DIAGRAM IS INTENDED AS GUIDANCE ONLY. WWW.TEXTRAIL.COM

L-27

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL - ROUND ELECTRICAL CONNECTORS

LIGHTS & ELECTRICAL

Part# 7000080 7000081 7000326 7000324 7000304 7000303 9900078 7000344 7000347 9900086 7000348 7000345 7000084 7000087 7000088 7000156 7000175 7000174 9900137 9900076 7000349 9900055 7000350 7000013 7000351

Part# 9900077 9900090 7000039 7000077 7000102 7000330 7000309 7000310 Part# 7000360 9900064 7000355 9900071 7000356 7000353 7000359

Ref # 11-402 11-404 48385 48365 48445 48435 20032 50-61-104 50-86-004 20034 50-86-007 50-61-108 701P 710P 710S 11-702 11-720 12-703 20042 20043 50-87-004 20044 50-87-007 20047 50-67-004

Round Electrical Connectors Description 4-Pole Round Metal Plug - Trailer Side 4-Pole Round Metal Socket - Vehicle Side 5-Pole Round Metal Plug - Trailer Side 5-Pole Round Metal Socket - Vehicle Side 6-Pole Round Die-Cast Plug - Trailer Side 6-Pole Round Die-Cast Socket - Vehicle Side 6-Pole Round Molded Plug - Vehicle Side 36" Long 6-Pole Round Molded Plug - Trailer Side 48" Long 6-Pole Round Molded Plug - Vehicle Side 48" Long 6-Pole Round Molded Plug - Trailer Side 72" Long 6-Pole Round Molded Plug - Vehicle Side 84" Long 6-Pole Round Molded Plug - Trailer Side 96" Long 7-Blade RV Metal Plug - Trailer Side 7-Blade RV Plastic Plug - Trailer Side 7-Blade RV Plastic Socket - Vehicle Side 7-Pole Round Metal Plug with Spring - Trailer Side 7-Pole Round Metal Socket - Vehicle Side 7-Pole RV Round Zinc Socket - Vehicle Side 7-Blade RV Round Molded Plug - Trailer Side 36" Long 7-Blade RV Round Molded Plug - Trailer Side 48" Long 7-Blade RV Round Molded Plug - Vehicle Side 48" Long 7-Blade RV Round Molded Plug - Trailer Side 72" Long 7-Blade RV Round Molded Plug - Vehicle Side 84" Long 7-Blade RV Round Molded Plug - Trailer Side 96" Long 7-Blade RV Round Molded Plug - Trailer Side 108" Long

Ref # 41836 48035 48115 41812 47115 47915 47905 48053

Flat Electrical Connectors Description 4-Flat Molded Plug - Trailer Side 36" Long 4-Flat Molded Socket - Vehicle Side 36" Long 4-Flat Molded Plug - Trailer Side 12" Long 4-Flat Molded Plug & Socket 12" Lead 4-Flat Molded Extension 48" 5-Flat Molded Plug - Trailer Side 18" Long 5-Flat Molded Socket - Vehicle Side 48" Long 5-Flat Molded Socket - Vehicle Side 60" Long

Ref # A15WB A18WB A20WB A25WB A30WB A35WB A40WB

Wiring Harness Description 4-Flat Molded Wishbone Harness 15' 4-Flat Molded Wishbone Harness 18' 4-Flat Molded Wishbone Harness 20' 4-Flat Molded Wishbone Harness 25' 4-Flat Molded Wishbone Harness 30' 4-Flat Molded Wishbone Harness 35' 4-Flat Molded Wishbone Harness 40'

WWW.TEXTRAIL.COM

L-28

7000080

7000081

7000326

7000324

7000304

7000303-02

7000304-02

7000303

7000084

7000088

7000087

7000156

7000175

7000174

7000344

9900137

9900076

9900078

9900077

9900090

7000330

7000309

7000310

7000077

9900064

9900071

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL ADAPTERS Part #

Ref #

Description

37565

Adapter, 7 to 6 & 4 Center pin auxiliary. Adapts a 7-RV blade to both a 6-round and a 4-wire flat. Universal - Center pin can be switched to auxiliary or electric brake.

7000045

37545

Adapter, 7 to 6 Center pin auxiliary. Adapts a 7-RV blade to 6-round. Universal - Center pin can be switched to electric brake. Includes dust cover.

7000041

37355

Adapter, 7-RV blade to 4 wire flat with dust cover.

7000046

18142

Adapter, 7-RV pin to 4 wire flat.

7000038

37305

Adapter, 6-round to 4 wire flat with dust cover.

7000043

47205

Adapter, 4 wire flat to 7-RV blade.

7000035

47185

Adapter, 4 wire flat to both a 4 wire flat and a 7 RV blade. Weatherproof.

7000037

47165

Adapter, 4 wire flat to 6-round pin connector.

7000051

7000051

7000045

7000046

7000041

7000038

7000043

7000035

7000037

7000048

7000049

MULTI-FIT TRAILER CONNECTORS Part #

Ref #

Description

7000048

40965

Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 6 round. Weatherproof. Fits the vehicles listed below:

7000049

40955

Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 7 RV blade. Weatherproof. Fits •20002004 GM •1999-2004 Ford •2004 Nissan Armada & Titan

Mounting bracket included with connector.

WWW.TEXTRAIL.COM

LIGHTS & ELECTRICAL

Vehicle Year(s) Ford F-Series Trucks 1999-2011 Ford Expedition 1999-2011 Ford Excursion 2000-2005 Ford Explorer 2002-2011 Ford Explorer Sport Trac 2007-2010 Ford Flex 2009-2010 Ford E-Series Vans 2004-2010 Lincoln Aviator 2003-2006 Lincoln Navigator 1999-2011 Lincoln Mark LT 2006-2008 Mercury Mountaineer 2002-2010 Nissan Armada 2004-2010 Nissan Titan 2004-2011 Infiniti QX-56 2004-2010 Kia Borrego 2009 Audi Q7 2007-2010 L-29

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL MULTI-FIT TRAILER CONNECTORS (Continued) Part# 7000335

Chrysler / Dodge / Jeep / Mitsubishi

Ref #

Description

42145

Trailer connector. Replaces factory 7-way socket with a 4 wire flat and 7 blade RV round. Weatherproof. Fits the vehicles listed here: Mounting bracket included with connector.

ELECTRICAL CONNECTION BRACKETS Part #

Ref #

7000055

I-23

7000063

48595

Durable Plastic Bracket for mounting 4 wire flat plug.

7000325

38605

Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 4, 5, or 6 way round connectors.

7000054

I-21

Aspen

Early 2007

Pacifica

2003-2008

Ram 1500

2000-2008

Ram 2500/3500

2000-2009

Dakota

2000-2009

Durango

2000-Early07

Commander

2006-2009

Grand Cherokee

2000-2009

Liberty

2005-2007

Wrangler

2004-2009

Sprinter

2002-2008

Mitsubishi Raider

2006-2008

Description Heavy-Duty Steel Zinc Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 7 or 9 pole connectors.

Heavy-Duty Steel Zinc Bracket for mounting vehicle end of trailer electrical connector to the vehicle. Bracket for vehicle end steel or plastic 4 or 6 way round connectors.

ELECTRICAL ACCESSORIES

LIGHTS & ELECTRICAL

Quick Splices Part#

Ref #

7000076

QSNSNG

Description

7000075

QSSNG

7000804

804

7000219

QSNS

Quick Splice Without Stop 18-14 AWG

7000044

QSSSG

Quick Splice Self-Strip 22-14 AWG with Silicone Gel

7000286

QSS

Quick Splice Strip 18-14 AWG White Without Stop Non-Gel Quick Splice With Stop Blue 18-14 AWG. Blue Non-Gel 3M Quick Splice 804 Scotchlok 18-16 AWG Auto-Elec with Gel Blue With Stop

Quick Splice With Stop Yellow 12-10 AWG 7000076

7000075

7000804

700044

Terminal Connectors Part#

Ref #

Description

7000267

TR14

Vinyl Funnel Terminal Ring 1/4" Eye 16-14 Gauge Blue

7000271

TR516

Vinyl Funnel Terminal Ring 5/16" Eye 16-14 Gauge Blue

7000033

TR38

Vinyl Funnel Terminal Ring 3/8" Eye 16-14 Gauge Blue

7000274

TR10

Vinyl Funnel Terminal Ring #10 Eye 16-14 Gauge Blue

WWW.TEXTRAIL.COM

L-30

Terminal Connectors also available insulated with nylon

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES (Continued) Coupler Terminal Connectors Part#

Ref #

Description

7000270

CTF

Nylon Insulated Coupler Terminal 16-14 Gauge Blue Female

7000034

CTM

Nylon Insulated Coupler Terminal 16-14 Gauge Blue Male

7000034

7000270

Butt Connectors Part#

Ref #

Description

7000268

BCVR22

Butt Connection Vinyl Insulated 22-18 Gauge Red

7000272

BCVY12

Butt Connection Vinyl Insulated 12-10 Gauge Yellow

7000273

BCVB16

Butt Connection Vinyl Insulated 16-14 Gauge Blue

Butt Connectors also available insulated with Nylon

Fork Terminal Connectors Part#

Ref #

Description

7000061

FC10Y

Nylon Insulated Fork Terminal #10 10-12 Gauge Yellow 10-32 Terminal

7000060

FC10B

Nylon Insulated Fork Terminal #10 16-14 Gauge Blue 10-32 Terminal

7000060

7000061

Bullet Terminal Connectors Part#

Ref #

Description

7000019

BLTCBM

Nylon Insulated Bullet Terminal 16-14 Gauge Blue 0.157 Male

7000020

BLTCBF

Nylon Insulated Bullet Terminal 16-14 Gauge Blue 0.157 Female

7000017

BLTCRM

Nylon Insulated Bullet Terminal 22-16 Gauge Red 0.157 Male

7000018

BLTCRF

Nylon Insulated Bullet Terminal 22-16 Gauge Red 0.157 Female

7000017 7000018

7000019 7000020

Terminal Pliers Part#

Ref #

Description

7000163

TPE

Terminal Pliers Economy 10 Gauge - 22 Gauge Rubber Grip Handle

7000166

TPHD

Terminal Pliers Heavy Duty 8 Gauge - 22 Gauge Rubber Grip Handle

7000163

7000166

Cable Ties Ref #

Description

7000287

CT75

Cable Tie 50 Tensile Black 7-1/2" Overall Length

7000071

CT85

Cable Tie 40 Tensile Natural 8-1/2" Overall Length

7000311

CT15B

Cable Tie 120 Tensile Black 15" Overall Length

7000068

CT15N

Cable Tie 120 Tensile Natural 15" Overall Length

7000069

CT21N

Cable Tie 120 Tensile Natural 21" Overall Length

7000028

CTMB

Cable Tie 1" 4-Way #10 screw hole / Adhesive Square Mount Black

7000027

CTMN

Cable Tie 1" 4-Way #10 screw hole / Adhesive Square Mount Natural

7000287

Circuit Breakers Part#

Ref #

Description

6500056

CBMB5

Circuit Breaker 5AMP with Mounting Bracket

6500003

CBMB15

Circuit Breaker 15AMP with Mounting Bracket

6500028

CBMB20

Circuit Breaker 20AMP with Mounting Bracket

6500029

CBMB30

Circuit Breaker 30AMP with Mounting Bracket

6500047

CBMB40

Circuit Breaker 40AMP with Mounting Bracket

6500048

CBMB50

Circuit Breaker 50AMP with Mounting Bracket

WWW.TEXTRAIL.COM

L-31

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

Part#


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES (Continued) Chrome Toggle Switches Part#

Ref #

Description

7000300

TS123

Toggle Switch 12-Volt 3-Terminals Mon-On-Off-Mon-On 50-Amp 1" Handle Screw Term Type Sngl Pole/Dbl Throw

7000321

TS126

Toggle Switch 12-Volt 6-Terminals On-Off 20-Amp 11/16" Handle Screw Term Type Dbl Pole/Dbl Throw

7000352

TS624

Toggle Switch 6-24-Volt 2-Terminals On-Off 50-Amp 1" Handle Screw Term Type Sngl Pole/Sngl Throw

7000426 TS62444

Toggle Switch 6-24 Volt 2-Terminals On-Off 50-Amp 1" Handle Screw Term Type Sngl Pole/Sngl Throw 44" Wires

7000151

TSR122

Toggle Switch Mounted in Recessed Plate 12-Volt 2-Position 20-Amp 11/16" Handle Screw Term Type Dbl Pole/Dbl Throw

7000464

TSRP

Aluminum Recessed Plate for Toggle Switch

7000151

7000464

Brass Push-Pull Switch Part#

Ref #

Description

7000152

PPS

Push-Pull 15A/25A On-Off 1-1/4" x 3/8" Stem Sngl Pole / Sngl Throw Wire Nuts

Part#

Ref #

Description

7000022

WNY

Hard Wire Nut Min(2) 18 Gauge Max (3) 16 Gauge Yellow

7000021

WNO

Hard Wire Nut Min(2) 18 Gauge Max (3) 10 Gauge Orange

7000022

7000021

Terminal Kits Part#

Ref #

Description

7000053

TK360N

7000052

TK360

Terminal Kit Insulated 360 Piece with Storage Box - No Pliers

7000014

TK430N

Terminal Kit Nylon 430 Piece with Steel Storage Box & Pliers

7000015

TK430

Terminal Kit Nylon 360 Piece with Storage Box - No Pliers

7000015

Terminal Kit 430 Piece with Steel Storage Box & Pliers

LIGHTS & ELECTRICAL

Electrical Tape Part#

Ref #

Description

7000265

PT60

Black Electrical Tape 3/4" x 60'

7000265

Flashers Part#

Ref #

Description

7000098

7098

Flasher Elec 2-Blade 12V XHD

7000150

1206

Flasher Elec-Mech 2-Term 12V

7000107

7107

Flasher Elec 2-Blade 12V XHD Circuit Testers

Part#

Ref #

Description

7000364

8901

6-Volt & 12-Volt System Circuit Tester

7000275

6392

12-Volt System Grabber Circuit Tester WWW.TEXTRAIL.COM

7000364

L-32

7000275

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES LED Connector Tester Part#

Ref #

Description

7000008

I-25

LED Connect Tester 4-Flat. Analyzes tail light, turn signal and ground

7000009

I-27

LED Connect Tester 7-Blade. Analyzes tail light, turn signal and ground

7000009

7000008

Tow Doctor Test Units Part#

Ref #

Description

7000305

50918

Tow Doctor Vehicle Test Unit with a 20-foot cord allowing one person to check a vehicle’s wire harness. Features test ground, auxiliary power, brake controller, brake, tail, directional and back-up lights. Adapts to 4-way flat, 6-way round or 7-RV blade round. Includes a heavy-duty carrying case to protect your Tow Doctor Test Unit.

7000306

50928

Tow Doctor Trailer Test Unit which enables one person to check a trailer’s wire harness. Features test for all trailer functions including left turn, brake, tail and backup lights; electric brake and auxiliary power. Trailer lights will illuminate as well as LED lights on tester to show function operation. Adapts to 4-way flat and 6 or 7-RV blade round. Includes battery terminal clips. Can be used with any 12-volt battery. Amperage meter shows actual amperage draw. For electric brakes, magnets are activated to determine correction operation. Includes a heavy-duty carrying case to protect your Tow Doctor Test Unit.

7000305

7000306

4-Flat Quick Fix Connector Part#

Ref #

Description

7000333

48195

4-Flat Quick Fix Connector. Includes Vehicle & Trailer Ends. 7000333

Converter Part#

Ref #

Description

8100110

48919

Tail light converter. Converts 5-wire system down to a 4-wire system. Utilizes turn signal separate from stop / tail lamp.

8100110

Module Part#

Ref #

7000148

118187

Description Module - Light Power 4-Amp maximum per circuit.

7000148

Junction Box Part#

Ref #

7000142

JJB

Description

7000142

6 or 7-Terminal Junction Box

LIGHTS & ELECTRICAL

Magnetic Strap & Bracket Part#

Ref #

Description

7000328

48095

Magnetic Bracket that keeps 4-Flat out of harms way

7000329

48585

Heavy Duty Magnetic Strap that protects dangling wires and allows you to store loose wires out of harms way

7000329

7000328

Convoluted Wire Loom Part#

Ref #

Description

9900053

PCT0375 3/8" Convoluted Split Poly Wire Loom

9900052

PCT0500 1/2" Convoluted Split Poly Wire Loom

9900145

PCT0750 3/4" Convoluted Split Poly Wire Loom WWW.TEXTRAIL.COM

Wire Loom L-33

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Part# 7000161 7000162 7000157

Ref # NAC4 NAC6 AC4

7000158

AC6

7000159

AC8

7000160

AC12

7000182

AC16

7000183

AC24

Part# 9900004 9900005 9900204

Ref # FC316 FC14 FC38

Wire Loom Clamps Description 1/4" Nylon Wire Loom Clamp 0.167" Mounting Hole 3/8" Nylon Wire Loom Clamp 0.167" Mounting Hole 1/4" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 3/8" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 1/2" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 3/4" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 1" Metal Wire Loom Clamp with Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel 1-1/2" Metal Wire Loom Clamp w/ Neoprene Cushion 0.265" Mounting Hole 1/2" Wide Plated Steel

7000160

7000161

Wire Frame Clips Description 3/16"ID Slip-On Steel Wire Frame / Panel Clip 1/4"ID Slip-On Steel Wire Frame / Panel Clip 3/8"ID Slip-On Steel Wire Frame / Panel Clip

9900004

Fuse Holders Part# 7000132 7000133 7000134 7000135

Ref # 11039 11040 11044 11045

Description In-Line Glass AGC Fuseholder with 30-Amp Fuse 12 Gauge Wire In-Line Max Blade ATC/ATO Fuseholder Waterproof 8 Gauge Wire In-Line Mini Blade ATC/ATO Fuseholder 30-Amp 14 Gauge Wire In-line Standard Blade ATC/ATO Fuseholder 20-Amp 12 Gauge Wire

7000132

7000133

7000134

LIGHTS & ELECTRICAL

Fuses Part# 7000317 7000318 7000126 7000114 7000116 7000119 7000121 7000124 7000125 7000113 7000115 7000117 7000120 7000122 7000073 7000118 7000123 7000169 7000168 7000167

Ref # AGC20A AGC25A ATCM5A ATCM10A ATCM15A ATCM20A ATCM25A ATCM30A ATC5A ATC10A ATC15A ATC20A ATC25A ATC30A ATC40A ATCMAX20 ATCMAX30 ATCMAX40 ATCMAX50 ATCMAX60

Description Fuse 20 Amp Glass AGC Fuse 25 Amp Glass AGC Fuse 5 Amp Mini Blade Tan ATC Fuse 10 Amp Mini Blade Red ATC Fuse 15 Amp Mini Blade Blue ATC Fuse 20 Amp Mini Blade Yellow ATC Fuse 25 Amp Mini Blade Clear ATC Fuse 30 Amp Mini Blade Green ATC Fuse 5 Amp Standard Blade Tan ATC/ATO Fuse 10 Amp Standard Blade Red ATC/ATO Fuse 15 Amp Standard Blade Blue ATC/ATO Fuse 20 Amp Standard Blade Yellow ATC/ATO Fuse 25 Amp Standard Blade Clear ATC/ATO Fuse 30 Amp Standard Blade Green ATC/ATO Fuse 40 Amp Standard Blade Orange ATC/ATO Fuse 20 Amp Maxi Blade Yellow ATC Fuse 30 Amp Maxi Blade Green ATC Fuse 40 Amp Maxi Blade Orange ATC Fuse 50 Amp Maxi Blade Red ATC Fuse 60 Amp Maxi Blade Blue ATC

WWW.TEXTRAIL.COM

L-34

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Replacement Bulbs Service Description

Part #

Ref #

Bulb Type

Design Volts

8100025 8100409 8100029 8100026 8100022 8100023 8100411 8100412 8100021 8100024 8100201 8100027 8100028 8100410

194

1157 1073 1003 1141 93 TL1004 1893 1895 89 97 57

Wedge Wedge S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet S.C. Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet Mini Bayonet

12 12 12.8 12.8 12.8 12.8 12.8 12.8 12.8 14 14 13 13.5 14

0.27 0.24 2.10 2.10 1.80 0.94 1.44 1.04 0.94 0.33 0.27 0.58 0.69 0.24

2 2 32 32 32 15 21 15 15 2 2 6 4 2

2500 500 1200 1200 200 100 1000 1000 100 7500 2000 750 5000 500

Heavy Duty Clearance/Marker Clearance/Marker/Instrument Back-up/Clearance Stop/Park/Tail/Signal Back-up Dome/RV Interior Dome/RV Back-up Porch Dome/RV Interior Instrument Indicator Instrument Interior Heavy Duty License Clearance/Marker/Instrument

8100413 8100247

67 471

Mini Bayonet Mini Bayonet

13.5 14.4

0.59 12

4 1

5000 1000

License Auto Instrument

168

1156

Design Volts Candle Power Life Hours Service Design

Watts/Amps Candle Power Life Hours

The voltage at which the lamp is designed for rated amperes, candle power and life characteristics. The average value of total light output of miniature lamps at design volts. The rated average life to be expected when operating at design volts. Actual service can vary. The major applications are listed. In most cases, bulbs can serve other applications.

14-Gauge Single Strand Primary Wire Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.117. Available in 20’, 100’, 500’ and 1000’ spools.

Wire Length on Spool

Ref #

Description

9900083

00483

Primary Wire 14-Gauge Single Strand Black

20’

9900085

00481

Primary Wire 14-Gauge Single Strand Blue

20’

9900084

00484

Primary Wire 14-Gauge Single Strand Brown

20’

9900088 9900081

00479 00482

Primary Wire 14-Gauge Single Strand Green Primary Wire 14-Gauge Single Strand Red

20’ 20’

9900087

00480

Primary Wire 14-Gauge Single Strand White

20’

9900082

00478

Primary Wire 14-Gauge Single Strand Yellow

20’

9900022

02410

Primary Wire 14-Gauge Single Strand Black

100’

9900023

02414

Primary Wire 14-Gauge Single Strand Blue

100’

9900024

02413

Primary Wire 14-Gauge Single Strand Brown

100’

9900025

02411

Primary Wire 14-Gauge Single Strand Green

100’

9900026

02408

Primary Wire 14-Gauge Single Strand Red

100’

9900027

02409

Primary Wire 14-Gauge Single Strand White

100’

WWW.TEXTRAIL.COM

L-35

Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.117 Available in 20’, 100’, 500’ and 1000’ spools.

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

Part #


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES

LIGHTS & ELECTRICAL

Part #

14-Gauge Single Strand Primary Wire (Continued) Wire Length on Ref # Description Spool

9900039

02424

Primary Wire 14-Gauge Single Strand Black

500’

9900040

02428

Primary Wire 14-Gauge Single Strand Blue

500’

9900041

02427

Primary Wire 14-Gauge Single Strand Brown

500’

9900042

02425

Primary Wire 14-Gauge Single Strand Green

500’

9900035

02422

Primary Wire 14-Gauge Single Strand Red

500’

9900043

02423

Primary Wire 14-Gauge Single Strand White

500’

9900044

02426

Primary Wire 14-Gauge Single Strand Yellow

500’

9900046

02438

Primary Wire 14-Gauge Single Strand Black

1000’

9900030

02442

Primary Wire 14-Gauge Single Strand Blue

1000’

9900031

02436

Primary Wire 14-Gauge Single Strand Red

1000’

Part#

Ref #

16-Gauge Single Strand Primary Wire Description

9900092 9900098 9900095 9900093 9900089 9900091 9900094 9900099 9900128 9900132 9900131 9900129 9900126 9900127 9900130 9900133

02360 02364 02363 02361 02358 02359 02362 02365 02374 02378 02377 02375 02372 02373 02376 02379

Primary Wire 16-Gauge Single Strand Black Primary Wire 16-Gauge Single Strand Blue Primary Wire 16-Gauge Single Strand Brown Primary Wire 16-Gauge Single Strand Green Primary Wire 16-Gauge Single Strand Red Primary Wire 16-Gauge Single Strand White Primary Wire 16-Gauge Single Strand Yellow Primary Wire 16-Gauge Single Strand Orange Primary Wire 16-Gauge Single Strand Black Primary Wire 16-Gauge Single Strand Blue Primary Wire 16-Gauge Single Strand Brown Primary Wire 16-Gauge Single Strand Green Primary Wire 16-Gauge Single Strand Red Primary Wire 16-Gauge Single Strand White Primary Wire 16-Gauge Single Strand Yellow Primary Wire 16-Gauge Single Strand Orange

Part#

Ref #

18-Gauge Single Strand Primary Wire Description

9900118 9900051 9900117 9900115 9900116

02308 02309 02311 02312 02313

Primary Wire 18-Gauge Single Strand Red Primary Wire 18-Gauge Single Strand White Primary Wire 18-Gauge Single Strand Green Primary Wire 18-Gauge Single Strand Yellow Primary Wire 18-Gauge Single Strand Brown

Wire Length on Spool 100’ 100’ 100’ 100’ 100’ 100’ 100’ 100’ 500’ 500’ 500’ 500’ 500’ 500’ 500’ 500’

Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 16 Gauge Stranding 19/29 Nominal OD 0.102 Available in 100’ and 500’ spools.

100’ 100’ 100’ 100’ 100’

Stranded annealed, single conductor copper wire with general purpose thermoplastic (GPT) insulation. Meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). 18 Gauge Stranding 16/30 Nominal OD 0.095 Available in 100’ spools.

WWW.TEXTRAIL.COM

L-36

2010 Copyright by TexTrail, Inc.


LIGHTS & ELECTRICAL ELECTRICAL ACCESSORIES Part # 9900034

Ref #

14-Gauge Jacketed Duplex Wire Description Jacketed Duplex Wire 14-Gauge Two Strand Grey Jacket with Black & White Conductors. Heavy-duty PVC jacketed wire meets SAE J1128 specifications and is RoHS compliant. Temperature rating of 221 degrees Fahrenheit (105 degrees Celsius). Nominal cold temperature rating of –22 degrees Fahrenheit (-30 degrees Celsius). 14 Gauge Stranding 19/27 Nominal OD 0.200 x 0.320 (1000’ wire length on spool)

03208

Trailer Cable Wire PVC Insulated, meets SAE J1128 specifications and is RoHS compliant. Nominal cold temperature rating of -7.6 degrees Fahrenheit (-22 degrees Celsius). Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). Available in 100’ and 500’ spools.

Part # 9900097

Ref #

Wire Length on Spool

Description

04914

Trailer Cable Wire 12/6-10/1 Gauge Stranding 19/25-19/23 Nominal OD 0.600 Yellow/Brown/Red/Black/Blue/Green/White with Black Jacket.

100’

9900038

04905

Trailer Cable Wire 14/4 Gauge Stranding 19/27 Nominal OD 0.410 Black/Red/Brown and White Rotation.

500’

9900003

04922

Trailer Cable Wire 16/6 Gauge Stranding 19/29 Nominal OD 0.425 Green/Blue/Yellow/Black/Red and Brown Rotation.

500’

04926

Trailer Cable Wire 14/6 Gauge Stranding 19/27 Nominal OD 0.500 Red/Blue/Green/ Yellow/Brown and Black Rotation.

500’

9900045

Bonded Parallel Wire All copper strand core wire meets SAE J1128 specifications and is RoHS compliant. Designed especially for RVs, and boat and utility trailers. Nominal cold temperature rating of -22 degrees Fahrenheit (-30 degrees Celsius). Temperature rating of 176 degrees Fahrenheit (80 degrees Celsius). Available in 100’, 500’ and 2500’ spools.

Ref #

Description

Wire Length on Spool

9900010

02925

Bonded Parallel Wire 18/4 Gauge Stranding 16/30 Nominal OD 0.095 x 0.380 White/ Brown/Yellow and Green Wires.

500’

9900021

98634

Bonded Parallel Wire 18/4 Gauge Stranding 16/30 Nominal OD 0.095 x 0.380 White/ Brown/Yellow and Green Wires.

2500’

9900120

02921

Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires.

100’

9900050

02922

Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires.

500’

9900020

99945

Bonded Parallel Wire 18/3 Gauge Stranding 16/30 Nominal OD 0.095 x 0.285 Brown/ Yellow and Green Wires.

2500’

9900049

02916

Bonded Parallel Wire 16/4 Gauge Stranding 19/29 Nominal OD 0.102 x 0.408 White/ Brown/Yellow and Green Wires.

500’

9900075

99604

Bonded Parallel Wire 16/4 Gauge Stranding 19/29 Nominal OD 0.102 x 0.408 White/ Brown/Yellow and Green Wires.

2500’

9900119

02912

Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires.

100’

9900048

02913

Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires.

500’

9900074

99944

Bonded Parallel Wire 16/3 Gauge Stranding 19/29 Nominal OD 0.102 x 0.306 Brown/ Yellow and Green Wires.

2500’

WWW.TEXTRAIL.COM

L-37

2010 Copyright by TexTrail, Inc.

LIGHTS & ELECTRICAL

Part #


LIGHTS & ELECTRICAL CONSPICUITY, LENSES & REFLECTORS Part #

Ref #

8100299

KCT6R6W

Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inches. 6-inches of Red and 6-inches of White. 2-inches wide. 3M

150’ Roll

8100456

KCT11R7W

Reflective Conspicuity Tape. Adhesive backed tape kiss cut at 18-inch strips. Strips are 11-inches of Red and 7-inches of White. 2-inches wide. Sold by foot.

150’ Roll

8100307

CT6R6W

Reflective Conspicuity Tape. Adhesive backed tape is 6-inches of Red and 6-inches of White. 2-inches wide.

150’ Roll

Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inch strips. 6-inches of Red and 6-inches of White. 2-inches wide. Avery Dennison

150’ Roll 150’ Roll

8100306 8100303

KCT12W

Reflective Conspicuity Tape. Adhesive backed tape is kiss cut at 12-inches. 2-inch wide White tape.

8100300

CTS12W

Reflective Conspicuity Tape. Adhesive backed White 12” strips. 2-inches wide.

12” Strips

CTS18RW

Reflective Conspicuity Tape. Adhesive backed tape in 18” strips. Strips are 11-inches of Red and 7-inches of White and are 2-inches wide.

18” Strips

RE-11AB

Oblong Acrylic Reflector for surface mount. Mounts with adhesive back or with screws on 3-15/16” centers. Amber.

RE-11RB

Oblong Acrylic Reflector for surface mount. Mounts with adhesive back or with screws on 3-15/16” centers. Red.

8100206

RE-13AB

3-3/16” Round Reflector for surface mount on a single screw. Amber.

8100207

RE-13RB

3-3/16” Round Reflector for surface mount on a single screw. Red.

8100222

RE-21AB

3-3/16” Round Acrylic Reflector for surface mount. Self-adhesive Amber.

8100223

RE-21RB

3-3/16” Round Acrylic Reflector for surface mount. Self-adhesive Red.

8100160

RE-31AS

3” Armored Reflector. Housed in rust-proof aluminum housing that mounts with screws.

8100301

8100225 8100224

LIGHTS & ELECTRICAL

KCT6R6WA

Description

Part# 8100481 8100063 8100151 8100156 8100130 8100122 8100128 8100154 8100140 8100141 8100167 8100168 8100100 8100101 8100164 8100074 8100425 8100401 8100121 8100127 8100126 8100082 8100227

Ref # AL-8RB A-2RB A-8RB A-9RB A-16RB A-24RB A-40RB A-43RB A-11AB A-11RB A-38AB A-38RB A-42AB A-42RB A-58AB A-58RB A-68AB A-68RB A-71AB A-81AB A-81RB A-82AB A-82RB

8100299

8100456

8100307

8100306

8100303

8100300

8100301

8100160 8100225

8100206 8100207

8100224

8100222 8100223

Lenses Description LED Tail Light Red Lens for 8100365, 8100366, 8100368, and 8100369 LED lights. LED Side Marker Red Lens for 8100365 and 8100366 LED lights. Tail Light Red Lens for 8100389, 8100390, 8100170 and 8100191 lights. Side Marker Red Lens for 8100477 and 8100478 lights. Lens Set: Red Tail and Side Marker Lens for 8100196 and 8100197 lights. Red Lens for 8100520 and 8100509 lights. Red Lens for 8100187 lights. Safety Triangle Reflector Kit Red Reflector Optics Lens for 8100187 lights. Part# Ref # Description Amber Lens for 8100139 lights. Triangle Safety Reflector Kit. Includes three safety 8850045 TRI Red Lens for 8100138 lights. warning reflector triangles with a plastic storage box Amber Lens for 8100497 lights. Red Lens for 8100498 lights. Amber Lens for 8100499 lights. Red Lens for 8100500 lights. Amber Lens for 8100102 lights. Red Lens for 8100103 lights. Safety Flares Amber Lens for 8100432 lights. Part# Ref # Description Red Lens for 8100433 lights. 8850013 FLARE Safety Flare. Burns for 20-minutes Amber Lens for 8100034 lights. Amber Lens for 8100098 lights. Red Lens for 8100099 lights. Amber Lens for 8100081 lights. Red Lens for 8100153 lights.

WWW.TEXTRAIL.COM

L-38

2010 Copyright by TexTrail, Inc.


T E X T R A I L PAC K AG E P R O D -

ELECTRICAL PART # DESCRIPTION 7000038-01 ADAPTER 6-WAY ROUND TO 4-WAY FLAT 7000041-01 ADAPTER 7-WAY RV TO 4-WAY FLAT 7000045-01 ADAPTER 7-WAY RV TO 6-WAY ROUND 7000051-01 ADAPTER 7-WAY RV TO 6-WAY ROUND & 4-WAY FLAT 7000313-01 ADAPTER 6-WAY ROUND TO 7-WAY RV (flexible) 6500039-01 BRAKE HARNESS-GM 99-07 6500049-01 BRAKE HARNESS-FORD 05-08 SUPER DUTY 8100118-01 LIGHT KIT COMPLETE W/Stop-Turn-Tail-Clearance 6500002-01 BRK CONTROL ENGAGE HAYES 1-3 AXLE DIGITAL TIMED 6500009-01 BRK CONTROL ENERGIZE III 1-2 AXLE PROPORTIONAL 6500011-01 BRK CONTROL SYNCHRONIZER HAYES 1-2 AXLE TIMED DELAY 6450172-01 MAGNET 10"x 1.5" 2.8K OVAL, DEXTER 6450165-01 MAGNET 10"x 2.25" 3.5K OVAL, DEXTER 6450159-01 MAGNET 12"x 2" ROUND, PRE-1988 HAYES 6450158-01 MAGNET 10"x 2.25" OVAL, HAYES-DEXTER 6450166-01 MAGNET 12"x 2" 5.2-6K OVAL, DEXTER 6450174-01 MAGNET 12.25"x 3.375" & 4" DEXTER 6450169-01 MAGNET 12.25"x 5" 12K OVAL, DEXTER 6450157-01 MAGNET 10"x 2.25" ROUND HAYES PKG RED WIRES (PRE-1988) 6450160-01 MAGNET 12.25"x 2.5" 7.2K OVAL, DEXTER RED WIRE 6450161-01 MAGNET 12"x 2" 7K OVAL, DEXTER BLK WIRE 6450162-01 MAGNET VENT 12"x 3.25" & 12.25"x 3.5" 8-12K HAYES 6450168-01 MAGNET 12.25"x3.5" 10K WARNER 6450170-01 MAGNET 7" x 1.25" 2K ROUND, DEXTER POST-04/1990 6450171-01 MAGNET 7" x 1.25" 2K ROUND DX PRE 4-90 YW WIRES TEXTRAIL 6450173-01 MAGNET 12.25"x 3.375" 7.2-8K OVAL DEXTER WHITE WIRE 6450183-01 MAGNET 12.25"x 5" 15K OVAL DEXTER BLUE WIRE

TOW-

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.

TEXTRAIL PACKAGE LINE

PART # DESCRIPTION 7350209-01 RECEIVER HITCH PIN 1/2" x 2-5/8" W/KEEPER 7350315-01 RECEIVER HITCH PIN 5/8" x 3" W/KEEPER 8200150-01 RECEIVER LOCK FITS 2"REC 5/8"PIN W/ KEYS 8200221-01 RECEIVER LOCK FITS 2"REC 5/8"PIN W/ KEYS (T3/DB-3)) 8200176-01 RECEIVER LOCK SET 5/8"-7/8"SPAN COUPLER KEY'D ALIKE (TM31) 8200177-01 RECEIVER LOCK SET RECEIVER 5/8" 2-1/2" KEY'D ALIKE (TM32) 8200220-01 LOCKING LUG NUT W/ KEY 1/2"NUT 3/4"SOCKET 6300082-01 HITCH BALL 2" X 1" X 2-1/4"SHANK 6K CHROME 6300079-01 HITCH BALL 2-5/16" X 1" X 2-1/4"SHANK 7.5K CHROME 6300031-01 HITCH BALL 2-5/16" X 1-1/4"" X 2-1/4"SHANK 10K CHROME


T E X T R A I L PAC K AG E P R O D -

TEXTRAIL PACKAGE LINE

RUNNING GEAR PART # DESCRIPTION 7800037-01 BEARING KIT 1" BT8 SPINDLE L44643 BEARING (1 Wheel) 7800038-01 BEARING KIT 1.125" BT16 SPINDLE (1 Wheel) 7800059-01 BEARING KIT #84 SPINDLE (1 Wheel) 7800070-01 BEARING KIT #42 15123/25580 BEARINGS (1 Wheel) 7800071-01 BEARING KIT #42 14125A/25580 BEARINGS (1 Wheel) 7700025-01 GREASE CAP 1.99"OD EZ-LUBE W/PLUG (Qty.2) 7700027-01 GREASE CAP 2.45"OD DRIVE-IN (Qty.2) 7700016-01 GREASE CAP 2.45"OD EZ-LUBE W/PLUG, 5.2-6K (Qty.2) 7700186-01 GREASE CAP 2.72"OD DRIVE-IN (Qty.2) 7700018-01 GREASE CAP 2.72" EZ-LUBE W/PLUG, 5.2-8K (Qty.2) 7700029-01 OIL CAP KIT W/O-RING & PLUG 6-8K&9K(PRE-10/89) DEXTER 7700030-01 OIL CAP KIT W/O-RING & CAP 9K(POST-10/89)-15K DEXTER 7700008-01 WHEEL BOLT 60 DEG 1/2"-20 x 0.88 (Qty.4) 7700120-01 WHEEL BOLT 90 DEG 9/16"-18 x1.12 (Qty.4) 9000030-01 SHACKLE BOLT & NUT KIT 9/16"-18 X 3" (Qty.4) 9000031-01 SHACKLE BOLT & NUT KIT 9/16"-18 X 3-1/2" (Qty.4) 7700107-01 PRESS-IN STUD 5/8" X 3.16" 9-12K (Qty.4) 7700109-01 PRESS-IN STUD 1/2" X 1.84" 3.5-7K (Qty.4) 7700045-01 WHEEL NUT CONE 60 DEG 1/2"-20 (Qty.6) 7700036-01 WHEEL NUT CONE 60 DEG 9/16"-18 (Qty.4) 7700048-01 WHEEL NUT CONE 90 DEG 5/8"-18 (Qty.4) 7700058-01 RIM CLAMP MOBILE HOME & UTILITY 14.5" RIMS (Qty.5) 9000163-01 SHACKLE STRAP KIT 2-1/4" HOLE CTR 1-1/4"W X 3-1/2"L (Qty.4) 9000223-01 SHACKLE STRAP KIT 2-5/8" HOLE CTR 1-1/4"W X 4"L (Qty.4) 9000164-01 SHACKLE STRAP KIT 3 1/8" HOLE CTR 1-1/4"W X 4-1/2" (Qty.4) 9000039-01 NYLON BUSHING KIT 9/16" ID X 11/16"OD X 2"L (Qty.8) 9000054-01 NYLON BUSHING KIT 9/16"ID X 3/4"OD X 1-3/4"L (Qty.6) 9000038-01 NYLON BUSHING KIT 9/16"ID x 11/16"OD X 1-3/4"L (Qty.8) 8750100-01 SPINDLE NUT 1"-14 TONGUE WASHER, NUT, COTTER PIN (Qty.2) 8750102-01 SPINDLE NUT 1"-14 D-WASHER, NUT & COTTER PIN (Qty.2) 8750103-01 SPINDLE NUT 1"-14 TANG WASHER, NUT & COTTER PIN (Qty.2) 8750101-01 SPINDLE NUT 1"-14 PLAIN WASHER, NUT & COTTER PIN (Qty.2) 9000244-01 U-BOLT PKG ROUND 1/2"DIA X 2-3/8"W X 5.5"L, 3.5K (Qty.2) 9000225-01 U-BOLT PKG ROUND 1/2"DIA x 3" W x 7"L, 5.2-6K (Qty.2) 9000239-01 U-BOLT PKG SQUARE 9/16"DIA X 1-3/4W X 5"L, 2K (Qty.2) 9000245-01 U-BOLT PKG ROUND 9/16" DIA X 3"W X 7.5"L, 5.2-6K (Qty.2) 9000242-01 U-BOLT PKG SQUARE 9/16"DIA X 2"W X 5-1/2"L, 2-3.5K (Qty. 2) 9100052-01 U-BOLT KIT ROUND 3/8"DIA X 1-3/4"W x 4"L, 2K (APUBR10) 9100048-01 U-BOLT KIT ROUND 9/16"DIA X 3"W X 7.5"L, 5.2-6K (APUBR9) 9100045-01 U-BOLT KIT ROUND 1/2"DIA X 2-3/8"W X 5-1/2"L, 3.5K (APUBR1) 9100047-01 U-BOLT KIT ROUND 1/2"DIA X 3"W X 7"L, 5.2-6K (APUBR2) 9100013-01 HANGER KIT SNGL AXLE 1.75"DIA DBL-EYE SPG 2-7K (APS1-TT) 9100014-01 HANGER KIT TNDM AXLE 1.75"DIA DBL-EYE SPG 2-7K (APT3) 9100015-01 HANGER KIT TNDM AXLE 1.75"DIA DBL-EYE SPG 2-7K (APT5) WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


INDEX 2,000 lb - 7,000 lb 1.75" Double Eye Springs

B-2

10,000 lb General Duty TORFLEX®

2,000 lb - 7,000 lb 1.75" Double Eye Springs

B-4

10,000 lb Heavy Duty - 15,000 lb 3" Slipper Springs

B-16

2,000 lb - 7,000 lb 1.75" Double Eye Springs

B-8

10,000 lb Heavy Duty Brakes

A-72

2,000 lb - 8,000 lb 1.75" & 2" Slipper Springs

B-3

10,000 lb Heavy Duty D100HD Leaf Spring Axle

A-67

2,000 lb Brakes

A-13

10,000 lb Heavy Duty Hub Group

A-70

2,000 lb Disc Brakes

A-14

10,000 lb Heavy Duty Suspension

A-67

2,000 lb Hub Group

A-12

10,000 lb Heavy Duty TORFLEX®

A-66

2,000 lb TORFLEX® / D20 Leaf Spring Axle

A-0

12,000 lb Brakes

A-72

3,500 lb - 8,000 lb 2" Slipper Springs

B-6

12,000 lb D120 Leaf Spring Axle.

A-67

3,500 lb - 8,000 lb 2" Slipper Springs

B-7

12,000 lb Hub Group

A-70

3,500 lb - 8,000 lb 2" Slipper Springs

B-9

15,000 lb Brakes

A-72

3,500 lb - 8,000 lb 2" Slipper Springs

B-6

15,000 lb D150 Leaf Spring Axle

A-67

3,500 lb Brakes

A-20

15,000 lb Hub Group

A-70

3,500 lb Disc

A-26

22,500 lb -25,000 lb Brakes

A-81

3,500 lb Electric Brakes

A-20

22,500 lb -25,000 lb D200 Leaf Spring Axle

A-76

3,500 lb Hub Group

A-18

22,500 lb -25,000 lb Hub Group

A-76

3,500 lb TORFLEX® / D35 Leaf Spring Axle

A-16

ABS Trailer Kit

K-14

4,400 lb Brakes

A-30

Actuating Couplers

K-6

4,400 lb D44 Leaf Spring Axle

A-28

Adapter for Receiver Tube

E-4

4,400 lb Hub Group

A-29

Adapter Sleeves

E-4

6,000 lb Brakes

A-44

Adapters

L-28

6,000 lb D60 Leaf Spring Axle

A-31

Adjustable Clevis

D-4

6,000 lb Disc Brakes

A-51

Adjustable Clevis

E-6

6,000 lb Electric Brakes

A-44

Adjustable Pintle Eye

D-4

6,000 lb Hub Group

A-37

Adjustable Tongue Coupler

D-4

6,000 lb Suspension

A-36

Adjustable Tow Bar

E-9

6,000 lb TORFLEX®

A-33

A-Frame Coupler

D-3

7,000 lb Brakes

A-44

A-Frame Jack

D-8

7,000 lb D70 Leaf Spring Axle

A-32

Agricultural & Industrial Winches

D-15

7,000 lb Disc Brakes

A-53

Agricultural Hubs and Components

A-85

7,000 lb Electric Brakes

A-44

Air Conditioning

H-7

7,000 lb Hub Group

A-39

Air Suspension System

B-29

7,000 lb Suspension

A-36

All Purpose Stain Remover

G-5

7,000 lb TORFLEX®

A-34

Aluminum Ball Mounts

7,200 lb Brakes

A-55

Aluminum Box (Underbody, Tongue & Specialty)

7,200 lb D72 Leaf Spring Axle

A-32

Aluminum Trim

7,200 lb Disc Brakes

A-56

Axle Straps

F-5

7,200 lb Hub Group

A-41

B&W Adjustable Receiver / Pintle Hitch

E-6

7,200 lb Suspension

A-36

B&W Gooseneck Hitches

E-12

7,200 lb TORFLEX®

A-35

B&W RV 5th Wheel

E-12

8,000 lb Brakes

A-58

B&W Tow & Stow Receiver Hitches

E-5

8,000 lb D80 Leaf Spring Axle

A-32

Back-Up Assist Camera

E-7

8,000 lb Disc Brakes

A-63

Back-Up Assist Camera

J-12

8,000 lb Electric Brakes

A-58

Back-Up Lights

L-20

8,000 lb Hub Group

A-42

Ball Corners

H-5

8,000 lb Suspension

A-36

Ball Mounts

E-4

8,000 lb TORFLEX®

A-35

Balls

E-7

9,000 lb 2" Slipper Springs

B-11

Bar Lock Assembly

J-5

9,000 lb 2" Slipper Springs

B-11

Batteries & Chargers

K-2

9,000 lb Brakes

A-72

Bearing Kits

A-90

9,000 lb D90 Leaf Spring Axle

A-66

Bearing Protectors

A-94

9,000 lb Disc Brakes

A-71

Bearings

A-89

9,000 lb Hub Group

A-69

Bins

F-6

9,000 lb Suspension

A-66

Bolt-On Receiver Hitches

E-2

10,000 lb General Duty 2-1/2" Slipper Spring 7/8" Eye

B-13

Bolt-On Swivel Jack

D-11

10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Dry)

B-15

Box (Aluminum & Powder Coated Underbody & Tongue, Specialty)

H-17

10,000 lb General Duty 2-1/2" Slipper Springs 3/4" Eye (Wet)

B-14

Bracket for Electrical Connectors

L-30

10,000 lb General Duty 2-1/2" Slipper Springs 7/8" Eye

B-13

Brackets (Channel & Adjustable)

E-6

10,000 lb General Duty Brakes

A-72

Brackets for Lighting

L-23

10,000 lb General Duty D100GD Leaf Spring Axle

A-66

Brake Cleaner

G-3

10,000 lb General Duty Disc Brakes

A-71

Brake Control & Actuator Replacement Parts

K-8

10,000 lb General Duty Hub Group

A-69

Brake Control & Actuators

10,000 lb General Duty Suspension

A-66

Brake Controllers

E-6 H-17 H-7 thru H-8

K-6 K-3 thru K-5

2010 Copyright by TexTrail, Inc.

INDEX

WWW.TEXTRAIL.COM

A-66


INDEX Brake Fluid

G-3

Double Eye Springs 2,000 lb - 7,000 lb 1.75"

Brake Mounting Flanges

A-87

Draw Bar

D-6

Brake Mounting Hardware

A-87

Drill Bits

H-16 & J-11 F-2 & J-7

Breakaway Kits

K-2

D-Rings

Breakaway Switch & Pin

K-2

Drop Hitches

E-3

Bulbs

L-35

Dropleg Jack

D-12

Bumper Receiver Hitches

E-3

Dropleg Jack & Landing Gear Accessories

D-13

Bumpers

J-11

Dump Tarp Kits

H-19

Bushings

B-20

Edge Guard

H-6

Butt Hinge

J-3

Electric Fan

H-7

Butterfly Latch

J-9

Electric Winches

Cab Lock Handles

J-5

Electrical Accessories

Cab Slam Locks Cable Ties

J-5 L-31

D-16 L-28 - L-34

Electro/Hydraulic Actuators

K-9

Equalizers

B-25

Cam Lock Assembly

J-5

E-Track

F-3

Cap Plugs

J-11

Extender for Receiver Tube

E-4

Caps for Gate Ramp Assemblies

H-15

EZ Jack

D-12

Cargo Carrier Platforms

E-8

Fenders

H-2 thru H-4

Cargo Management System

F-4

Fifth Wheel Hitches

E-10

Catch / Pull Latch

J-9

Flashing & Revolving Lights

L-22

Ceiling Heat & Air Units

H-7

Flat Mount Coupler

D-5

Center Caps

A-91

Fleet Count

L-2

Center Caps

C-6

Floor Screws

H-10

Certificate / Permit Holder

L-26

Flush Latches

J-4

Chain

F-3

Flush Mount Hinges

J-3

Chains

J-17

Folding Gooseneck Hitch Balls

Chargers & Batteries

K-2

Gas / Water Cooler Holder

Chemicals

G-3

Gate Lift Assist

Chrome Edge Trim Chrome Wheel Nuts Cleaner Clearance & Side Marker Lights

H-7 thru H-8 C-5 G-5 L-2, L-7 & L-13

E-11 F-6 H-14

Gear Oil

G-3

Generators

H-8

Gooseneck Channels

E-9

Gooseneck Coupler

D-5

Clevis

D-3

Gooseneck Hitch Plates

E-9

Combination Hanger Kits

B-7

Gooseneck Hitches

E-11

Combination Pintle Hitch

E-7

Grab Handles

F-1, J-2 &J-7

Connectors

L-28

Gravel Guard

H-6

Conspicuity Tape

L-38

Grease

G-3

Grease & Oil Seals

A-88

Continuous Hinges

J-3

Convert-A-Ball速

E-5

Grease Caps

Corner Protectors

F-5

Grommets

A-91 L-25 - L-26

Coupler Hardware Kit

D-3

Gussets

H-6

Coupler Latch Repair Kit

D-6

Hand Towels

G-5

Cushioned Ball Mounts

E-5

Handles (Cab Lock)

D20 Leaf Spring Axle

A-10

Handles (Grab)

J-5 F-2, J-2 & J-7

D35 Leaf Spring Axle

A-16

Hangers

B-24

D44 Leaf Spring Axle

A-28

Hardener

G-6

D60 Leaf Spring Axle

A-31

Hasp

J-5

D70 Leaf Spring Axle

A-32

Heating Units

H-7

D72 Leaf Spring Axle

A-32

Heavy Duty Ball Mounts

D80 Leaf Spring Axle

A-32

Heavy Duty Jack

E-4 D-12

D90 Leaf Spring Axle

A-66

Heavy Duty Suspension System

B-27

D100GD Leaf Spring Axle

A-66

Heavy Duty Wheel Mounting Hardware

A-93

D100HD Leaf Spring Axle

A-67

Hinge Pin

J-3

D120 Leaf Spring Axle.

A-67

Hinges

J-3 E-7

D150 Leaf Spring Axle

A-67

Hitch Balls

D200 Leaf Spring Axle

A-76

Hitch Pins

J-8

"D" Bumpers

H-12

Holland Mini Fifth Wheel

E-9

Dead Bolt Flush Latch Decorative Brackets Direct Weld Swivel Jacks

INDEX

B-2, B-4 & B-8

Door Holdbacks

J-4 L-24 & L-25 D-10 J-6

Hood Latch Hooks

J-4 F-3 & J-8

Hub Caps

C-5

Hub Covers

C-6

Door Holders

J-6

Hydraulic Hoist Systems

H-19

Double Ball Mount

E-4

Hydraulic Line Kit

K-10

Double Eye Springs

B-19

Hydraulic Line Kit (Flexible)

K-12

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


INDEX Hydraulic Line Kit (Tandem Dual) Identification Light Bars

K-13 L-2, L-9 & L-17

Ratchet

F-5

Ratchet Straps

F-5

Incandescent Lighting

L-13

Receiver Accessories

E-5 thru E-7

Interchangeable Hitch Balls

E-5

Receiver Ball Mounts

E-4

Interior & Dome Lights

L-22

Receiver Hitch Pins

J-8

Jack Foot and Caster

D-14

Receiver Locks

E-7

D-9

Receiver Locks

J-12

Jack Repair Parts King Pins Landing Gear Landing Gear & Dropleg Jack Accessories Latches

D-5, E-9 & J-11 D-13 D-13 J-4 & J-9

Receiver Tube Cover

E-6

Receiver Tubes

E-3 & E-8

Reducer

G-6

Reflective Tape

L-38

Reflectors

L-38

LED Light Kits

L-13

LED Lighting

L-2 & L-7

Respirators & Scotch Brite™

G-2

L-2

Retaining Ring Swivel Jack

D-11

LED Micro-Flex™ Lighting Lenses for All Lighting License Lights

L-38 L-13 & L-20

Retaining Rings

A-94

Rim Clamps

A-94

Light Plugs, Pigtails & Lead Wires

L-26

Rings

Light Protectors & Brackets

H-7

Rivets & Rivet Tools

H-10 & J-10

Linch Pins

J-9

Rivets & Rivet Tools

H-10 & J-10

Links

F-3

Rockshield

Links

J-8

Roof Bows (Round Pipe)

H-6

H-18

Roof Bows (Square Tube)

H-5

Liquid Storage Tanks

F-2 & J-7

H-6

Load Binder

F-3

Roof Caps

H-5

Load Locker™

F-4

Rope Rings

F-2 & J-7

Locking Lug Nuts

C-5

Round Tube Swivel Jack

D-9

Locks

J-12

Round U-Bolts

B-22

Lubricants

G-3

Rubber Bumpers

J-11

Lug Wrench

C-5

Rubber Mats

H-12

Marine Jack

D-7

Rubber Straps

Marine U-Bolts

B-23

Rumber® Products

H-11

Metal Surface Cleaner

G-5

RV 5th Wheels

E-10

Micro-Flex™ LED Lighting

L-2

RV Generators

H-8

Motorcycle Wheel Chock

F-6

RV Towing Hitch

E-3

Safety Chains

J-18 D-11

Mounting Accessories

L-23 & L-24

F-5 & H-19

Mounting Rails (5th Wheels)

E-11

Scissor Jack

Mounting Rails (Folding Ball)

E-10

Sealants

Mud Flaps

H-12

Self Tapping Torx® Head Floor Screws

Nose Bows

H-5

Shackle Straps

Nose Caps

H-5

Simulators

C-6

Nose Plate

D-6

Single Axle Fenders & Fender Backs

H-2

Oil Caps

A-91

Single Axle Hanger Kits

B-2

Packaged U-Bolts

B-23

Single Speed Winches

D-15

G-4 H-10 & J-10 B-20

Paddle Latches

J-4

Slam Locks

J-5

Penetrating Oil

G-3

Slats

H-5

Pin Stripers

Slipper Spring 7/8" Eye 10,000 lb General Duty 2-1/2"

B-13

J-8 & J-9

Slipper Springs

B-19

Pintle Hooks

E-7

Slipper Springs

B-19

Pintle Mounts

E-6

Slipper Springs 10,000 lb Heavy Duty - 15,000 lb 3"

B-16

Pipe Bows

H-6

Slipper Springs 2,000 lb - 8,000 lb 1.75" & 2"

Pipe Mount Swivel Jack

D-9

Slipper Springs 3,500 lb - 8,000 lb 2"

Pins (Hitch, Linch & Snapper)

G-2

B-3 B-6 thru B-9

Powder Coated Box (Underbody, Tongue & Specialty)

H-17

Slipper Springs 3/4" Eye (Dry) 10,000 lb General Duty 2-1/2"

B-15

Power Jack

D-11

Slipper Springs 3/4" Eye (Wet) 10,000 lb General Duty 2-1/2"

B-14

G-6

Primer

Slipper Springs 7/8" Eye 10,000 lb General Duty 2-1/2"

B-13

F-3 & J-8

Slipper Springs 9,000 lb 2"

B-11

Quick Splices

L-30

Smooth Shank Hitch Balls

Races

A-89

Snap Ring Swivel Jack

Rack Post & Gearbox

D-14

Snapper Pins

J-9

RACK-EM Double Barrel Gate Lift Assist

H-17

Spare Tire Carrier / Mount

J-2

Quick Links

RACK'EM™

F-6

Specialty Ball Mounts

Racks

F-6

Specialty Box

E-8 D-11

E-4 H-18

H-15

Specialty Lighting

L-22

Ramp Springs

H-16

Spindle Parts (Washers, Nuts & Cotter Pins)

A-84

Ramps

H-14

Spindles

A-83

Spring and U-Bolt Kits

B-18

Rapid Hitch Ball Mounts

E-6

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.

INDEX

Ramp Gate Assemblies


INDEX Spring Loaded Latches

J-9

Tradesman Boxes

H-18

Spring Seats

A-87

Trailer Connectors

L-28

Springs

B-18

Trailer Dolly

F-6

Springs and Accessories - AIR LIFT

B-30

Transmission Fluid

Springs for Ramps

H-15

Trim

Square Tube Swivel Jack

D-10

Triple Axle Fenders & Fender Backs

H-4

Square U-Bolts

B-23

Triple Axle Hanger Kits

B-8

Stabilizer Jack

D-12

Triple Ball Mount

E-4

Stake Components

J-11

Truck Control Kit

K-14

H-16 & J-10

Truck-Tack Boxes

H-17

J-2 & J-7

Turn Signal Lights

L-11 & L-19

Stake Pocket Steps (Folding & Weld-On) Stop / Turn / Tail Lights

L-2, L-10 & L-18

Two Speed Winches

G-3 H-8 & H-9

D-15

Straight Tongue Coupler

D-2

U-Bolt Hardware

B-22

Strap Hinges

J-3

U-Bolt Kits

B-18

Straps Suitcase Latch

F-5 & H-19 J-9

U-Bolts

B-20

Underbody Box

H-17

Superwinch Electric Winches

D-16

Utility Lights

Suspension Hardware

B-26

Vacuum / Hydraulic Brake System

K-14

Tandem Axle Fenders & Fender Backs

H-3

Vacuum Pump Kit

K-14

Tandem Axle Hanger Kits

B-4

Valspar Finishes

G-6

Tarp Kits

H-19

Valve Stems

C-5

Vents

H-8

Terminal Connectors

L-30 thru L-31

L-12 & L-22

Terminal Pliers

L-31

VHB Tape

G-2

TexTrail Packaged Towing Products

E-13

Warn Electric Winches

D-16

TexTrail Value Finishes

G-6

Warning & Specification Decals

G-2

J-4

Water Caddy

H-13

Water Cooler Rack

H-13

T-Handle Latches Tie Bolts

B-21

Tie Loops

F-2 & J-7

Web Winder

F-5

Tie Plates

B-21

Wedge Caps

H-5

Tipper Latch

J-9

Weight Distribution Hitches

E-8

Tire & Wheel Assemblies

C-8

Wheel & Tire Assemblies

C-8

Tires

C-8

Wheel Bolts

A-92

Tongue Box

H-17

Wheel Chock

D-12 & F-6

TORFLEX® 09 2,000 lb

A-10

Wheel Covers

C-6

TORFLEX® 10 3,500 lb

A-16

Wheel Mounting Hardware

A-91

TORFLEX® 11 6,000 lb

A-33

Wheel Nets

F-5

TORFLEX® 12 7,000 lb

A-34

Wheel Nuts

A-92 & C-5

TORFLEX® 12V 7,200 lb

A-35

Wheel Simulators

C-6

TORFLEX® 13 8,000 lb

A-35

Wheel Studs

A-92

TORFLEX® 13D 10,000 lb Heavy Duty

A-69

Wheels

C-7

TORFLEX® 13G 10,000 lb General Duty

A-68

Winch Bar

F-5

Torx® Head Self Tapping Floor Screws

H-10 & J-10

Winch Ratchets

Torx® Screw Bits & Holder

H-10 & J-10

Winch Strap

D-15

Towing Mirror

J-2

Wire & Cable

L-35 - L37

Tractor, Halogen & Tow Lights

L-22

Wiring Harnesses

F-5

INDEX

L-28

WWW.TEXTRAIL.COM

2010 Copyright by TexTrail, Inc.


TexTrail Trailer Parts  

A complete line of trailer parts. The only part your business is missing.

Read more
Read more
Similar to
Popular now
Just for you