Concrete Info Generic Drawings

Concrete Info Generic Engineered Drawings

30 Wide and Under 14ft tall and under.

This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

Remember. Before doing any foundation work you should first pull your permit. The resources below can help with getting an estimate on the concrete project. The building’s foundation must follow local building codes.

Once you receive a permit, you can give the contractor the drawings & this resources page to help with the construction of the foundation. Site work and permitting is the customers responsibility.

Your project will come with generic engineered drawings stamped for your state upon request. The drawings will contain detailed information for your concrete. Be sure to review the drawings. ●

●

●

●

●

Before doing foundation work, first pull your permit to make sure the building project will be accepted.

The fondation must follow the drawings and local code requirements.

Once permit is approved, give drawings to whoever is doing foundation work.

When your foundation is finished, call your scheduling to get on the schedule Final step is your building is delivered and installed.

This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

Example Purpose of Generic Drawings

Notch Slab Benefits The notch slab helps keep water out of your building by having the siding run between the fondation.

This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

Disclaimer - Customer is responsible for the foundation meeting local code and following engineered drawings.

Concrete Dimension Notch Total Width Base rail+7in

Center Section of pad.

Exact size of base rail.

Exact Size of Baserail

Extra 3.5 inches This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

Extra 3.5 inches

Extra 3.5 inches

Total Length+7in

Extra 3.5 inches

Extra 3.5 Inches Wide 1 ½ inch Tall Notch

Concrete Slab Details Notch Design

Minimum 4in Monolithic Slab Extra 3.5 Inches wide 1 ½ inches Tall Notch

2 Pieces of ½ in Rebar This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

12in Perimeter Footing For footer depth consult with local building department

How to create Notch Design

Use two by four to create notch Design.

This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

Advantages Concrete Slab Details Notch Design Siding of the building will overlap the notch to keep water out.

Baserail

This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.

Example of Notch Design

This is just recommendation on fondation you must follow local codes and engineered drawings specs.

Customer is responsible for land work.