How to Install the micro:bit mainboard in the control box.
Step 1
As shown in the pictures below, press down with your thumbs and slide upward in the direction of the arrow.
With the micro:bit LEDs facing upward (toward you and visible), slide the micro:bit mainboard into the control box slot.
Step 3
Put the upper cover on the control box and slide it back into position.
1 represents turning on the LED HOLDER.
0 represents turning off the LED HOLDER.
The signal shows the degree of rotation. The number can be set in the range 0 to 180°.
0 indicates that something is detected.
1 indicates that nothing is detected.
0 indicates that something is detected.
1 indicates that nothing is detected.
1. The direction of rotation of the motor, where 1 = clockwise & 0 = anti-clockwise.
2. The speed of the motor, where the digital signal reads the lower left corner and the analog signal reads the upper left corner.
