Mountain bike tires buying advice

Mountain ​bike tires​ buying advice

When mountain biking is important to have the right equipment. Unfortunately you are not there with a good mountain bike: it is also important what kind of tires you mount on your mountain bike. The importance of tire choice should not be underestimated: not only can the tires affect your performance, the right tire choice can also make driving much more comfortable. After reading this blog you know exactly which MTB tire best suits your mountain bike and in particular the surface you are cycling on.

Mountain bike tires For the best results, it is important to tune the tires to the type of surface. So check with yourself on which type of surface you cycle the most.

Wet surface Do you often cycle on a wet surface? Then go for a tire with coarse, tightly packed studs on the tread and the side of the tire. Tires for a wet surface are also specially designed to ensure that the mud does not accumulate on the tire.

Mud There are also bands specifically for mud. This type of tire is very narrow with coarse, open studs. Due to the small width the belt cuts through the mud for more grip on the hard underlying layer. As a result, the belt can only be used to a limited extent on other surfaces. The narrow mud tires must be driven with a higher tire pressure and are not suitable for low tire pressures.

The rolling resistance is therefore higher and you have much less grip on mud-free paths. If you want to ride on mud paths as well as dry paths, choose a slightly wider bubble belt with an open profile.

Dry terrain Are you a lover of dry terrain, such as sand or forest land? Then a semi-slick might be something for you. The side of this tire has low studs, and the thread has very low to no studs. This ensures a good grip in the corners.

Rocky area For the daredevils that often go mountain biking in rocky areas, a wide band with high studs is a good choice. This ensures a good grip, even if you cycle over loose stones or forest land.

Allround MTB tires

Finally, all-round mountain bike tires are also available: perfect for the mountain biker who wants to vary with types of surface and does not want to lay down. Most of the previous types of tires are available in different versions. You can choose between different sizes, or for extra light items and tubeless tires. Characteristic of an all-round tire are the closely spaced studs on the tread. Because of these studs you have sufficient grip and a low rolling resistance.

Note: ​Absolute minimum for a bicycle used even to a small extent, however, We should be b​ ike gear review​ once every year because it’s good for everyone

Mountain bike inner tubes

In addition to the tire, the inner tube must of course not be forgotten! The right mountain bike inner tube can provide more grip and comfort. The standard inner tube is made of butyl, but latex tubes are also available. The latex inner tube has many advantages: it reduces rolling resistance, and reduces the chance that your tire will leak. Despite the low weight of this type of tire, the latex tire is a lot less vulnerable than the standard butyl variant. However, this type of tire also has disadvantages. Not only is latex more sensitive to heat than butyl, it is also a lot more porous. This means that you lose air pressure faster. Some riders are of the opinion that the advantages of a latex band certainly outweigh the disadvantages, but it is of course up to you to make this decision.

Tubeless tires Tubeless tires do not require an inner tube. Not only does this provide a lighter band, there is also a smaller chance of leaks. A lower tire pressure is also required than with a mtb tire with an inner tube: instead of a tension of 2 to 4 bar, it is possible to drive with a tension of 1.5 to 2.5 bar. Tubeless tires are unfortunately not perfect: they are a lot harder to assemble than the standard tires.