Issuu on Google+

INFLATABLE RESCUE TENTS

■ Easy deployment within a few minutes after being connected to air supply ■ Inflatable with pressure air or electrical blower ■ Quick-coupling device to connect the pressure air supply ■ Safety relief valve ■ Inflatable structure with two-chambers ■ High air tightness and strength of the inflatable structure ■ Tent roof made from PVC coated fabric in white, yellow, orange, red, khaki green colours ■ Tent floor made from a high-strength material with antiskid treatment ■ Tent entrance is equipped with zip fasteners, at the floor there are reversible canvas fasteners with rings ■ Ground fastening flaps and guy ropes on support arches of the structure to secure the stability in all weathers, on a hard surface the tent can be anchored by means of weight bags filled with water or any other weight placed on the ground fastening flaps

■ Venting mesh over the entrance to ensure a natural air exchange ■ Side walls contain 2 closable openings with diameter 350 mm to connect heating, air condition ■ Side walls contain 2 closable openings with diameter 150 mm to connect electro installation cables, hoses ■ Anchor and repair set and hand pump are included ■ Packed in a transport bag ■ Ideal base during a rescue action ■ For short-term and long-term use in many areas – in case of events with an immediate need for hinterlands, for accommodation of people, material storage and similar. ■ Long lifetime with only minimum maintenance and repair required ■ Selection from many types, sizes and colours ■ Easy handling and operation ■ Service centre in the manufacturer´s plant

■ On the structure inside the tent, there are fastening straps for lamps, devices and similar

1

2

3

4

5

6

7

8


On request

Material used

■ Three-layers windows – roof material, film, net

■ Floor – PES textile double-sided PVC coating, high-strength, abrasion proof, water-proof, with anti-skid modification, surface weight approx. 520 g/m2

■ Removable floor, i.e. attached by means of Velcro ■ Removable hygiene liner ■ Removable insulation liner

■ Inflatable frame – PAD fabric double-sided rubber mixture coating, high strength, abrasion resistant, air-proof

■ Lengthwise or crosswise partition curtains to divide the inner space

■ Internal partition curtain – PES fabric one-side PUR coating, water-proof

■ Connecting passages for connection of tents into bigger units and combinations, e.g. field hospitals

■ Isolating liner – Quilted material consisting of three layers: PES fabric, PES fleece and PES fabric resp. non-woven, surface weight approx. 250 g/m2

■ Connecting passage for connection between tent and container ■ Front shelter for container

Roof:

■ Side (technical) entrance

■ PES fabric one-sided PVC coating, high-strength, water-proof, surface weight approx. 300 g/m2, or

■ Weight bags to be filled with water for anchoring the tent on a hard surface

■ PES fabric double-sided PVC coating, high-strength, water-proof, surface weight approx. 420 g/m2, or

Additional accessories:

■ PES fabric double-sided PVC coating, high-strength, water-proof, self extinguishing, surface weight approx. 700 g/m2

- heating - air condition - additional solid floor - lamps etc.

■ Internal partition curtain – PES fabric one-side PUR coating, water-proof. ■ Isolating liner – Quilted material consisting of three layers: PES fabric, PES fleece and PES fabric resp. non-woven, surface weight approx. 250 g/m2.

Fastening for lamps

Venting mesh

Opening for heating

Accessories for the tent

BCB International Ltd. Clydesmuir Road, Cardiff CF24 2QS UK Tel: +44 (0)2920 433 700 Fax: +44 (0)2920 433 701 Email: info@bcbin.com

www.bcbin.com


Rescue tents brochure