Legacy%20product%20catalog

Legacyâ„¢ System

simplyfixed SMART PACK

simplyLegacy Mount-Free

Legacy4

Legacy3

Legacy2

Legacy1

All-in-1 Packaging

INTERNAL HEX

Table of Contents Page # Implant Design & Surface

1

2-9 simplyLegacy Mount-Free Implants

10-12

13-17

Concave Profile: Healing Collars, Transfers & Temporary Abutments

*Multi-Unit formerly Screw Receiving or Screw Retained

simplyfixed SMART PACK, Ball Abutments & Components

27

28-31

Surgical Tray

Gold, Plastic & Titanium Engaging & Non-Engaging Abutments

25

26

Multi-Unit* Abutments & Components

Scan Adapters, Straight Abutments & Ancillary Components

23 24

LOCATORÂŽ Abutments & Components

Concave Profile: simplycrown & bridge SMART PACK & Analogs

21 22

Straight & Angled Contoured, Titanium & Zirconia Abutments

Labeling Definitions, Descriptions & Implant Dimensions

18-19

20

Cover Screws, Healing Collars, & Transfers

All-in-1 Packaging Implants

32-33

Surgical, Prosthetic & Drill Instruments

Implant Design & Surface Mini-threads with Double-lead Threads for Faster Insertion The bodies of the Legacy1, Legacy2, Legacy3 and Legacy4 implants are tapered to facilitate insertion in an undersized socket (stop at intermediate drill) for expansion in soft bone. This increases initial stability (G. Niznick: Clinical Oral Health 2000 “Achieving Success in Soft Bone”). The SBM textured surface extends over the entire endosseous portion of the Legacy system implants. Mini-threads start 1mm below the crest of the bone and extend for 2.0-2.5mm before transitioning into double-lead threads to the apex of the implant.

The mini-threads are half the depth and half the distance between adjacent peaks compared to the double-lead threads that extend to the apex of the implant. Mini-threads reduce stress in the critical crestal bone region while double-lead threads reduce the number of turns required to seat the implant. Vertical cutting grooves extend up the implant from the apex for self-tapping insertion.

Standard “V” Thread

Quadruple Lead MiniThreads

Buttress Thread

0.3mm

Buttress Thread All Legacy implants have mini-threads for reduced stress near the crest of bone and double-lead threads on the body for 2X faster insertion

0.4mm

The 1.5o taper to the OD of the Legacy1, 2, 3 & 4 implants facilitate soft bone expansion for increased stability.

0.8mm

0.6mm

Double Lead Threads

0.8mm

1.5 Deg. OD Taper

1.5 Deg. OD Taper Legacy1 threads provide the same 1.5o taper to the inside (ID) and outside thread (OD) diameters

0.4mm

5.0 Deg. ID Taper

1.5 Deg. OD Taper

3.0 Deg. ID Taper­­

Legacy2 and Legacy4 Implants

Legacy2, 3 & 4 provide more thread engagement by tapering the inside thread diameter (ID) at 3o & 5­­­o while the outside thread diameter (OD) tapers at 1.5o

SBM™ and HA Coated Surface Options

SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough texture.

Animal Studies Bone Response to SBM Surface

SEM’s of Our Surfaces Mini-threads textured by blasting with SBM: Blasted with Soluble HA Particles HA Coating: High Crystalline 40u layer SBM Surface 20X

SBM Surface 50X Brazilian Study* Shows SBM

% Provides Superior Bone Contact

80

80

Mean Percentage of Bone Contact

70 60 50

70 62.75

60 48.91

30

HA Surface 50X

41.70

20 10 TPS

Machined

52.7

30

10 HA

57.6

40

20

SBM

63.8

50

58.89

40

HA Surface 20X

LSU Study* Shows SBM

% Provides Superior Bone Contact

36

SBM

HA

TPS

Machined

1

Legacy4

Legacy4 Packaging

Legacy Implant System Features & Benefits

• Revolutionary new, two-piece fixture-mount. Top includes torque-safety feature and detaches in impression for metal-to-metal transfer accuracy • Fixture-mount may be shortened at the line to function as a final preparable abutment • 2mm extender retained by cover screw for use as a healing collar for one-stage surgery features a concave transgingival profile which matches the fixture-mount • Internal connection with 1.5mm long hex & internal lead-in bevel • Body is straight for top 1/3rd with bottom 2/3rds tapered for bone expansion. Surgically-compatible with Tapered Screw-Vent® drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill) • Double-lead buttress threads for improved insertion and quadruple lead threads near top for increased thread engagement & reduced stress • Surface options: SBM (Soluble Blast Media) textured or HA-coated • Three aggressive self-tapping grooves extend 2/3rds length up the implant • Surgical flexibility with multiple insertion options: choose between implant level insertion with hex driver or fixture-mount insertion with either 2.5mm hex driver or ratchet

Extender Cover Screw

3.0mmD Platform

3.5mmD Platform

3.5mmD Platform

4.5mmD Platform

4.5mmD Platform

5.7mmD Platform

5.7mmD Platform

3.2mmD Implant

3.7mmD Implant

4.2mmD Implant

4.7mmD Implant

5.2mmD Implant

5.7mmD Implant

7.0mmD Implant

2

Legacy4 SBM & HA Surface Implants | Includes Cover Screw, Extender & Carrier/Transfer. Extender not supplied with 6mmL implant

3.2mmD

Requires 2.0 Hex | Driver for Implant-Level Insertion

SBM Code 873208 873210 873211 873213 873216

HA Code 883208 883210 883211 883213 883216

Diameter 3.2mmD 3.2mmD 3.2mmD 3.2mmD 3.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

873208 883208

873210 883210

873211 883211

873213 883213

873216 883216

3.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 873706 873708 873710 873711 873713 873716

HA Code 883706 883708 883710 883711 883713 883716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

873706 883706

873708 883708

873710 883710

873711 883711

873713 883713

873716 883716

874206 884206

874208 884208

874210 884210

874211 884211

874213 884213

874216 884216

874706 884706

874708 884708

874710 884710

874711 884711

874713 884713

874716 884716

875206 885206

875208 885208

875210 885210

875211 885211

875213 885213

875216 885216

875706 885706

875708 885708

875710 885710

875711 885711

875713 885713

875716 885716

4.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 874206 874208 874210 874211 874213 874216

HA Code 884206 884208 884210 884211 884213 884216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

4.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 874706 874708 874710 874711 874713 874716

HA Code 884706 884708 884710 884711 884713 884716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

5.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 875206 875208 875210 875211 875213 875216

HA Code 885206 885208 885210 885211 885213 885216

Diameter 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD

5.7mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 875706 875708 875710 875711 875713 875716

HA Code 885706 885708 885710 885711 885713 885716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

7.0mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 877006 877008 877010 877011 877013

HA Code 887006 887008 887010 887011 887013

Diameter 7.0mmD 7.0mmD 7.0mmD 7.0mmD 7.0mmD

877006 887006

877008 887008

877010 887010

877011 887011

877013 887013

3

Legacy3

Legacy3 Packaging

Legacy Implant System Features & Benefits

• Internal connection with 1.5mm long hex & internal lead-in bevel • Tapered body allows insertion using Tapered Screw-Vent® drills for 3.7mmD, 4.2mmD & 4.7mmD implants only Surface options: SBM (Soluble Blast Media) textured or HA-coated • Double-lead buttress threads for improved insertion & initial stability, quadruple-lead threads near top for increased thread engagement & reduced stress • 2mm extender retained by cover screw for use as a healing collar or for one or two-stage surgery • Color-coded carrier usable as a closed-tray transfer and/or final full-contour abutment • Two self-tapping grooves, extending halfway up implant • Surgical flexibility with multiple insertion options: choose between implant level insertion with hex driver or fixturemount insertion with either 2.5mm hex driver or ratchet Extender Cover Screw

3.0mmD Platform

3.5mmD Platform

3.5mmD Platform

4.5mmD Platform

4.5mmD Platform

5.7mmD Platform

5.7mmD Platform

3.2mmD Implant

3.7mmD Implant

4.2mmD Implant

4.7mmD Implant

5.2mmD Implant

5.7mmD Implant

7.0mmD Implant

4

Legacy3 SBM & HA Surface Implants | Includes Cover Screw, Extender & Carrier/Transfer. Extender not supplied with 6mmL implant

3.2mmD

Requires 2.0 Hex | Driver for Implant-Level Insertion

SBM Code 853208 853210 853211 853213 853216

HA Code 863208 863210 863211 863213 863216

Diameter 3.2mmD 3.2mmD 3.2mmD 3.2mmD 3.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

853208 863208

853210 863210

853211 863211

853213 863213

853216 863216

3.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 853706 853708 853710 853711 853713 853716

HA Code 863706 863708 863710 863711 863713 863716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

4.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 854206 854208 854210 854211 854213 854216

HA Code 864206 864208 864210 864211 864213 864216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

853706 863706

853708 863708

853710 863710

853711 863711

853713 863713

853716 863716

854206 864206

854208 864208

854210 864210

854211 864211

854213 864213

854216 864216

854706 864706

854708 864708

854710 864710

854711 864711

854713 864713

854716 864716

855206 865206

855208 865208

855210 865210

855211 865211

855213 865213

855216 865216

855706 865706

855708 865708

855710 865710

855711 865711

855713 865713

855716 865716

4.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 854706 854708 854710 854711 854713 854716

HA Code 864706 864708 864710 864711 864713 864716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

5.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 855206 855208 855210 855211 855213 855216

HA Code 865206 865208 865210 865211 865213 865216

Diameter 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD

5.7mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 855706 855708 855710 855711 855713 855716

HA Code 865706 865708 865710 865711 865713 865716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

7.0mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 857006 857008 857010 857011 857013

HA Code 867006 867008 867010 867011 867013

Diameter 7.0mmD 7.0mmD 7.0mmD 7.0mmD 7.0mmD

857006 867006

857008 867008

857010 867010

857011 867011

857013 867013

5

Legacy2

Legacy2 Packaging

Legacy Implant System Features & Benefits

• Internal connection with 1.5mm long hex & internal lead-in bevel • Body is straight for top 1/3rd with bottom 2/3rds tapered for bone expansion. Surgically compatible with Tapered Screw-Vent® drills (except the 5.7mmD Implant uses 5.4/4.8mmD Step Drill) • Surface options: SBM (Soluble Blast Media) textured or HA-coated • Double-lead buttress threads for improved insertion & quadruple lead threads near top for increased thread engagement & reduced stress • 2mm extender retained by cover screw for use as a healing collar for one stage surgeryColor-coded carrier usable as a closed-tray transfer & temporary abutment­­­ • Three aggressive self-tapping grooves extending 2/3rds length up the implant • Surgical flexibility with multiple insertion options: choose between implant level insertion with hex driver or fixture-mount insertion with either 2.5mm hex driver or ratchet

Extender Cover Screw

3.0mmD Platform

3.5mmD Platform

3.5mmD Platform

4.5mmD Platform

4.5mmD Platform

5.7mmD Platform

5.7mmD Platform

3.2mmD Implant

3.7mmD Implant

4.2mmD Implant

4.7mmD Implant

5.2mmD Implant

5.7mmD Implant

7.0mmD Implant

6

Legacy2 SBM & HA Surface Implants | Includes Cover Screw, Extender & Carrier/Transfer. Extender not supplied with 6mmL implant

3.2mmD

Requires 2.0 Hex | Driver for Implant-Level Insertion

SBM Code 823208 823210 823211 823213 823216

HA Code 833208 833210 833211 833213 833216

Diameter 3.2mmD 3.2mmD 3.2mmD 3.2mmD 3.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

823208 833208

823210 833210

823211 833211

823213 833213

823216 833216

3.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 823706 823708 823710 823711 823713 823716

HA Code 833706 833708 833710 833711 833713 833716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

823706 833706

823708 833708

823710 833710

823711 833711

823713 833713

823716 833716

824206 834206

824208 834208

824210 834210

824211 834211

824213 834213

824216 834216

824706 834706

824708 834708

824710 834710

824711 834711

824713 834713

824716 834716

825206 835206

825208 835208

825210 835210

825211 835211

825213 835213

825216 835216

825706 835706

825708 835708

825710 835710

825711 835711

825713 835713

825716 835716

4.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 824206 824208 824210 824211 824213 824216

HA Code 834206 834208 834210 834211 834213 834216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

SBM Code 824706 824708 824710 824711 824713 824716

HA Code 834706 834708 834710 834711 834713 834716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

4.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

5.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 825206 825208 825210 825211 825213 825216

HA Code 835206 835208 835210 835211 835213 835216

Diameter 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD

5.7mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 825706 825708 825710 825711 825713 825716

HA Code 835706 835708 835710 835711 835713 835716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

7.0mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 827006 827008 827010 827011 827013

HA Code 837006 837008 837010 837011 837013

Diameter 7.0mmD 7.0mmD 7.0mmD 7.0mmD 7.0mmD

827006 837006

827008 837008

827010 837010

827011 837011

827013 837013

7

Legacy1

Legacy1 Packaging

Legacy Implant System Features & Benefits

• Internal connection with 1.5mm long hex & internal bevel • Tapered body allows insertion using Tapered Screw-Vent® drills (except the 5.7mmD implant uses 5.4/4.8mmD Step Drill) • Double-lead “V” threads for improved insertion & quadruplelead threads near top for increased thread engagement & reduced stress • 2mm extender retained by cover screw for use as a healing collar for one stage surgery • Two self-tapping grooves, extending halfway up implant • Surgical flexibility with multiple insertion options: choose between implant level insertion with hex driver or fixturemount insertion with either 2.5mm hex driver or ratchet

3.5mmD Platform

3.5mmD Platform

4.5mmD Platform

5.7mmD Platform Extender Cover Screw

3.7mmD Implant

8

4.2mmD Implant

4.7mmD Implant

5.7mmD Platform

Placing Implant with Carrier

Color coded titanium carrier

Use indents on carrier to align implant hex

Attach cover screw and extender to implant

Suture soft tissue around extender

Legacy1 SBM & HA Surface Implants | Includes Cover Screw, Extender & Carrier/Transfer

3.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 803708 803710 803711 803713 803716

HA Code 813708 813710 813711 813713 813716

Diameter 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

803708 813708

803710 813710

803711 813711

803713 813713

803716 813716

804208 814208

804210 814210

804211 814211

804213 814213

804216 814216

804708 814708

804710 814710

804711 814711

804713 814713

804716 814716

805708 815708

805710 815710

805711 815711

805713 815713

805716 815716

4.2mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 804208 804210 804211 804213 804216

HA Code 814208 814210 814211 814213 814216

Diameter 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

4.7mmD

Requires 2.5 Hex | Driver for Implant-Level Insertion

SBM Code 804708 804710 804711 804713 804716

HA Code 814708 814710 814711 814713 814716

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

5.7mmD

Requires 3.0 Hex | Driver for Implant-Level Insertion

SBM Code 805708 805710 805711 805713 805716

HA Code 815708 815710 815711 815713 815716

Diameter 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

9

simplyLegacy Mount-Free Implants

simplyLegacy System Features With cover screw and 3mm healing collar included, our mount-free implants allow you to streamline your surgical procedures while still having the necessary, compatible components readily accessible.

Please turn to page 20 & 26 for SMART PACK details

Greater Range of Dimensional Options Short 6mm length for areas with limited bone height Wide 5.2, 5.7 & 7.0 diameters for more molar replacement options 16

7 Diameters (mm) 3.2

3.7

4.2

4.7

5.2

5.7

7.0 10

11.5

13

8 6

3.0

3.5

4.5

5.7

4 Platforms (mm)

6 Lengths (mm)

Flat indicates flat of hex for indexing Tissue height measuring guides in 2mm intervals

Color-coded to prosthetic platform

cover screw

Color-coded to prosthetic platform

Durable metal retentive spring

3mm healing collar Axial alignment feature to prevent tool from tilting

10

simplyLegacy Implants Diameter 3.2mmD 3.2mmD 3.2mmD 3.2mmD 3.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

3.7mmD

823706U 823708U 823710U 823711U 823713U 823716U

3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

824206U 824208U 824210U 824211U 824213U 824216U

4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

3.2mmD

Code 823208U 823210U 823211U 823213U 823216U

4.2mmD

simplyLegacy2 Implants

Diameter 3.2mmD 3.2mmD 3.2mmD 3.2mmD 3.2mmD

Length 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

3.7mmD

853706U 853708U 853710U 853711U 853713U 853716U

3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD 3.7mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

854206U 854208U 854210U 854211U 854213U 854216U

4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD 4.2mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

3.2mmD

Code 853208U 853210U 853211U 853213U 853216U

4.2mmD

simplyLegacy3 Implants

Drivers

Cover Screw Healing Collar

The use of simplyLegacy drivers is required for simplyLegacy implants

Code HD2.0SG HT2.0SG HT2.0LG

Platform(s) Used With 3.0mmD 3.0mmD 3.0mmD

Type Handpiece Wrench Wrench

Length 25mm 18.1mm 29.5mm

Code HD2.5SG HT2.5SG HT2.5LG

Platform(s) Used With 3.5mmD & 4.5mmD 3.5mmD & 4.5mmD 3.5mmD & 4.5mmD

Type Handpiece Wrench Wrench

Length 25mm 18.1mm 29.5mm

HD2.0SG

HT2.0SG

HT2.0LG

HD2.5SG

HT2.5SG

HT2.5LG

11

simplyLegacy Mount-Free Implants simplyLegacy2 Implants

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Code 854706U 854708U 854710U 854711U 854713U 854716U

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

Length 6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

5.2mmD

825206U 825208U 825210U 825211U 825213U 825216U

5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

855206U 855208U 855210U 855211U 855213U 855216U

5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD 5.2mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

5.7mmD

825706U 825708U 825710U 825711U 825713U 825716U

5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

855706U 855708U 855710U 855711U 855713U 855716U

5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL 16mmL

5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

827006U 827008U 827010U 827011U 827013U

7.0mmD 7.0mmD 7.0mmD 7.0mmD 7.0mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL

5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

857006U 857008U 857010U 857011U 857013U

7.0mmD 7.0mmD 7.0mmD 7.0mmD 7.0mmD

6mmL 8mmL 10mmL 11.5mmL 13mmL

5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

4.7mmD

Diameter 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD 4.7mmD

7.0mmD

simplyLegacy3 Implants

Code 824706U 824708U 824710U 824711U 824713U 824716U

Drivers

The use of simplyLegacy drivers is required for simplyLegacy implants

Code HD2.5SG HT2.5SG HT2.5LG

Code HD3.0SG HT3.0SG HT3.0LG

12

Platform(s) Used With 3.5 & 4.5mmD 3.5 & 4.5mmD 3.5 & 4.5mmD

Platform(s) Used With 5.7mmD 5.7mmD 5.7mmD

Type Handpiece Wrench Wrench

Type Handpiece Wrench Wrench

Length 25mm 18.1mm 29.5mm

Length 25mm 18.1mm 29.5mm

HD2.5SG

HT2.5SG

HT2.5LG

HD3.0SG

HT3.0SG

HT3.0LG

Legacy Labeling: Definitions & Descriptions

2

803713 Legacy™1 Implant

3 4

SBM®

5

Size: 3.7mmD x 13mmL,

6

Qty: 1

3.5mmD Platform

Use by date XXXX-XX-XX Do not open Do not re-use if damaged Consult instructions for use

7 8 9

16

803713 Legacy™1 Implant XXXXX

80 = Legacy1 SBM 37 = 3.7mmD body diameter 13 = 13mmL body length

803713 Legacy™1 Implant XXXXX

1

(XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXX

Legacy Implant Vial and Cap Label

Made in USA

17

10

15

11 13

12

14

2

3 4 5 6

8035-47 Legacy™ Plastic Engaging Temporary Abutment

Includes: Fixation Screw [1000-06] Size: Platform: 3.5mm Qty: 1 Do not re-use

18 8 9

Do not open if damaged Consult instructions for use

8035-47 Legacy™ Abutment XXXXX

80 = Legacy prosthetics 35 = 3.5mmD platform diameter -47= prosthetic specific code

8035-47 Legacy™ Abutment XXXXX

1

(XX)XXXXXXXXXXXXXX(XX)XXXXXX(XX)XXXXX

Legacy Prosthetic Vial and Cap Label 16

8035-47

Made in USA

17 15

10

12

14

13

1) Our products carry the CE mark and fulfill the

10) Do not re-use symbol

requirements of the Medical Device Directive 93/42 EEC

11) Sterilized using gamma irradiation symbol

2) Manufacturer Symbol 3) Product code or reference number

12) Caution: US law restricts the sale of these devices by or on the order of a dentist or physician

4) Product description 5) Item quantity 6) Product dimensions 7) Use by date (XXXX-XX) 8) Tamper proof symbol 9) Refer to Instructions For Use (IFU)

13) Country of origin 14) Unique Device Identification (UDI) barcode and text 15) Lot number (XXXXXX) 16) Implant prosthetic platform diameter (written and color-coded) 17) Implant body diameter color reference on surgical tray 18) Non-sterile symbol

13

Legacy1 Implant Dimensions

0.25mmL Bevel Taper starts at 1mm

2.0mmL Zone Mini-threads 1-72UNF Internal Thread

Length + 0.25mm

Double-lead “V” Threads

­HA

3.7mmD Body

0.25mmL Bevel

3.5mmD Platform with a 2.5mmD Internal Hex

1-72UNF Internal Thread Length + 0.25mm

Double-lead “V” Threads

SBM Texture

3.7mmD Legacy1 3.1mmD Apex Diameter

Taper starts at 1mm

2.0mmL Zone Mini-threads

HA

4.2mmD Body

1.5mm Hex Depth

SBM Texture

4.2mmD Legacy1 3.6mmD Apex Diameter

0.25mmL Bevel Taper starts at 1mm

2.0mmL Zone Mini-threads

4.5mmD Platform 1.5mm Hex Depth

1-72UNF Internal Thread Length + 0.25mm

Double-lead “V” Threads

HA

SBM Texture

4.7mmD Body 4.5mmD Platform with a 2.5mmD Internal Hex

4.7mmD Legacy1 4.1mmD Apex Diameter

Taper starts at 1mm

2.0mmL Zone Mini-threads

5.7mmD Platform

1-72UNF Internal Thread

1.5mm Hex Depth

Length + 0.25mm

Double-lead “V” Threads

SBM Texture

­­­­HA

5.7mmD Body 5.7mmD Platform with a 3.0mmD Internal Hex

5.7mmD Legacy1 5.1mmD Apex Diameter

14

Legacy2 and Legacy4 Implant Dimensions

0.25mmL Bevel

3.0mmD Platform

2.0mmL Zone Mini-threads

0.6mm Hex Depth 1.2mm Hex Depth

Taper starts at 3mm

1.6 UNM Internal Thread Length + 0.25mm

Double-lead Buttress Threads

HA

3.2mmD Body

SBM Texture 3.0mmD Platform with a Double Internal Hex

3.2mmD Legacy2 and Legacy4 2.3mmD Apex Diameter

3.7mmD Body

0.25mmL Bevel

2.0mmL Zone Mini-threads

Taper starts at 4.5mm

HA

0.25mmL Bevel

2.0mmL Zone Mini-threads

1-72UNF Internal Thread Double-lead Buttress Threads

2.25mmD (upper) and 2.0mmD (lower)

Length + 0.25mm

3.5mmD Platform with a 2.5mmD Internal Hex

1-72UNF Internal Thread Taper starts at 4.5mm

Double-lead Buttress Threads

HA

SBM Texture

3.7mmD Legacy2 and Legacy4 3.1mmD Apex Diameter

4.2mmD Body

4.7mmD Body

0.25mmL Bevel

1.5mm Hex Depth

Length + 0.25mm SBM Texture

4.2mmD Legacy2 and Legacy4 3.6mmD Apex Diameter

0.25mmL Bevel

2.0mmL Zone Mini-threads

2.0mmL Zone Mini-threads 1-72UNF Internal Thread

Taper starts at 4.5mm

Double-lead Buttress Threads

Length + 0.25mm

4.5mmD Platform with a 2.5mmD Internal Hex

Taper starts at 3mm

1-72UNF Internal Thread

Length + 0.25mm

Double-lead Buttress Threads HA

HA

SBM Texture

SBM Texture 4.7mmD Legacy2 and Legacy4 4.1mmD Apex Diameter

5.2mmD Body

1.5mm Hex Depth

5.2mmD Legacy2 and Legacy4 4.6mmD Apex Diameter

15

Legacy2 and Legacy4 Implant Dimensions continued

5.7mmD Body 0.25mmL Bevel

2.0mmL Zone Mini-threads

2.0mmL Zone Mini-threads

1-72UNF Internal Thread

Taper starts at 4.5mm

Double-lead Buttress Threads

Length + 0.25mm

1-72UNF Internal Thread 5.7mmD Platform with a 3.0mmD Internal Hex

Double-lead Buttress Threads

SBM Texture

HA

Taper starts at 4.3­­mm

Length + 0.25mm SBM Texture

HA

5.7mmD Legacy2 and Legacy4 5.1mmD Apex Diameter

1.5mm Hex Depth

7.0mmD Legacy2 and Legacy4 5.1mmD Apex Diameter

7.0mmD Body

Legacy3 Implant Dimensions

0.25mmL Bevel Taper starts at 1.25mm

2.0mmL Zone Mini-threads

3.0mmD Platform

0.6mm Hex Depth 1.2mm Hex Depth

1.6 UNM Internal Thread Length + 0.25mm

Double-lead Buttress Threads

HA

SBM Texture

3.2mmD Legacy3 2.6mmD Apex Diameter

16

3.2mmD Body

3.0mmD Platform with a Double Internal Hex 2.25mmD (upper) and 2.0mmD (lower)

Legacy3 Implant Dimensions continued

0.25mmL Bevel Taper starts at 1.25mm

2.0mmL Zone Mini-threads 1-72UNF Internal Thread

Length + 0.25mm

Double-lead Buttress Threads

HA

3.7mmD Body

0.25mmL Bevel

3.5mmD Platform with a 2.5mmD Internal Hex

1-72UNF Internal Thread

4.7mmD Body Taper starts at 1.25mm

2.0mmL Zone Mini-threads

SBM Texture

HA

4.2mmD Body

0.25mmL Bevel

Length + 0.25mm

Double-lead Buttress Threads

SBM Texture

3.7mmD Legacy3 3.1mmD Apex Diameter

Taper starts at 1.25mm

2.0mmL Zone Mini-threads

1.5mm Hex Depth

4.2mmD Legacy3 3.6mmD Apex Diameter

0.25mmL Bevel Taper starts at 1.25mm

2.0mmL Zone Mini-threads 1-72UNF Internal Thread

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

HA

4.5mmD Platform with a 2.5mmD Internal Hex

HA

SBM Texture 4.7mmD Legacy3 4.1mmD Apex Diameter

5.2mmD Body

5.7mmD Body Taper starts at 1.25mm

2.0mmL Zone Mini-threads

Length + 0.25mm

Double-lead Buttress Threads

1.5mm Hex Depth

SBM Texture

5.2mmD Legacy3 4.6mmD Apex Diameter

0.25mmL Bevel

2.0mmL Zone Mini-threads

Taper starts at 3­­mm

1-72UNF Internal Thread

1-72UNF Internal Thread Length + 0.25mm

Double-lead Buttress Threads

5.7mmD Platform with a 3.0mmD Internal Hex

Double-lead Buttress Threads

SBM Texture

HA

Length + 0.25mm SBM Texture

HA

5.7mmD Legacy3 5.1mmD Apex Diameter 7.0mmD Body

1.5mm Hex Depth

7.0mmD Legacy3 5.1mmD Apex Diameter

17

Concave Profile: Healing Collars & Transfers

Healing Collars-Concave Profile

Code 8730-12 8730-13 8730-15 8730-17 8735-12 8735-13 8735-15 8745-12 8745-13 8745-15 8757-12 8757-13 8757-15

8735-12

8745-12

8757-12

8730-13

8735-13

8745-13

8757-13

8730-15

8735-15

8745-15

8757-15

Requires 1.25mmD Hex Tools

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD 5.7mmD

Narrow Healing Collars-Concave Profile

Code 8735-12N 8735-13N 8735-15N 8735-17N 8745-12N 8745-13N 8745-15N 8745-17N 8757-12N 8757-13N 8757-15N 8757-17N

8730-12

Width 3.8mmD 3.8mmD 3.8mmD 3.8mmD 4.8mmD 4.8mmD 4.8mmD­­ 5.8mmD 5.8mmD 5.8mmD 6.6mmD 6.6mmD 6.6mmD­­

Length 2mmL 3mmL 5mmL 7mmL 2mmL 3mmL 5mmL 2mmL 3mmL 5mmL 2mmL 3mmL 5mmL

8730-17

8735-12N

8745-12N

8757-12N

8735-13N

8745-13N

8757-13N

8735-15N

8745-15N

8757-15N

8735-17N

8745-17N

8757-17N

Requires 1.25mmD Hex Tools

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Width 3.8mmD 3.8mmD 3.8mmD­­ 3.8mmD 4.8mmD 4.8mmD 4.8mmD 4.8mmD 5.8mmD 5.8mmD 5.8mmD 5.8mmD

Length 2mmL 3mmL 5mmL 7mmL 2mmL 3mmL 5mmL 7mmL 2mmL 3mmL 5mmL 7mmL

Open-Tray Implant Transfers-Concave Profile

Includes Fixation Screw with 1.25mmD Hex

Code 8730-08 8735-08 8745-08 8757-08

18

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-26 1000-10 1000-10 1000-10

1000-26

8730-08

1000-10

8735-08

8745-08

8757-08

Concave Profile: Transfers & Temporary Abutments

Narrow Open-Tray Implant Transfers-Concave Profile Includes Fixation Screw with 1.25mmD Hex

Code 8735-08N 8745-08N 8757-08N

Platform 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-10 1000-10 1000-10

1000-10

8735-08N

8745-08N

8757-08N

Non-Engaging Open-Tray Implant Transfers-Concave Profile Includes Fixation Screw with 1.25mmD Hex

Code 8730-08NE 8735-08NE 8745-08NE 8757-08NE

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-26 1000-10 1000-10 1000-10

1000-26

8730-08NE

1000-10

8735-08NE

8745-08NE

8757-08NE

Narrow Non-Engaging Open-Tray Implant Transfers-Concave Profile

Includes Fixation Screw with 1.25mmD Hex

Code 8735-08NNE 8745-08NNE 8757-08NNE

Platform 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-10 1000-10 1000-10

8735-08NNE

1000-10

8757-08NNE

8745-08NNE

Closed-Tray Implant Transfers-Concave Profile

Includes Fixation Screw with 1.25mmD Hex

Code 8730-05 8735-05 8745-05 8757-05

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-41 1000-06 1000-06 1000-06

1000-41

1000-06

8730-05

8735-05

8745-05

8757-05

Narrow Closed-Tray Implant Transfers-Concave Profile

Includes Fixation Screw with 1.25mmD Hex

Code 8735-05N 8745-05N 8757-05N

Platform 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-06 1000-06 1000-06

Plastic Engaging Temporary Abutments-Concave Profile

Code 8730-47 8735-47 8745-47 8757-47

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

1000-06

8735-05N

8745-05N

8757-05N

Includes Fixation Screw with 1.25mmD Hex

Collar Heights 2.0mm 2.0mm 2.0mm 2.0mm

Replacement Screw 1000-41 1000-06 1000-06 1000-06

8730-47

8735-47

8745-47

8757-47

19

Concave Profile: simplycrown & bridge SMART PACK & Analogs

simplycrown & bridge SMART PACK INCLUDES: Straight Abutment with concave profile Transfer Analog Castable Coping Comfort Cap Fixation Screw with 1.25mmL Hex

simplycrown & bridge SMART PACKS-Concave Profile

Code足 8730-21 8730-22 8730-23 8735-21 8735-21N 8735-22 8735-22N 8735-23 8735-23N 8745-21 8745-21N 8745-22 8745-22N 8745-23 8745-23N 8757-21 8757-21N 8757-22 8757-22N 8757-23 8757-23N

Platform 3.0mmD 3.0mmD 3.0mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD 5.7mmD

Abutment Height 5.5mm 5.5mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm 4.0mm 5.5mm

Collar Heights 1.0mm 2.0mm 3.0mm 1.0mm 1.0mm 2.0mm 2.0mm 3.0mm 3.0mm 1.0mm 1.0mm 2.0mm 2.0mm 3.0mm 3.0mm 1.0mm 1.0mm 2.0mm 2.0mm 3.0mm 3.0mm

Use Analog 8537 8537 8537 8747S 8537 8747S 8537 8747S 8537 8757S 3047 8757S 3047 8757S 3047 8765S 3057 8765S 3057 8765S 3057

8730-21

8735-21

8745-21

8757-21

8730-22

8735-21N

8745-21N

8757-21N

8730-23足足足

8735-22

8745-22

8757-22

8735-22N

8745-22N

8757-22N

8735-23

8745-23

8757-23

8735-23N

8745-23N

8757-23N

Straight Abutment Analogs-Short For use with 4mm height Straight Abutments

Code 8747S 8757S 8765S Straight Abutment Transfers-Short

Abutment Width 4.7mmD 5.7mmD 6.5mmD

8747S

8757S

8765S

8747-02

8757-02

8765-02

For use with 4mm height Straight Abutments

Code 8747-02 8757-02 8765-02

Abutment Width 4.7mmD 5.7mmD 6.5mmD

Straight Abutment Analogs-Legacy4

Code 8730 8735 8745 8757

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD 8730

20

8735

8745

8757

Cover Screws, Healing Collars & Transfers Surgical Cover Screws

Requires 1.25mmD Hex Tools

Code 8530-01 8035-01 8045-01 8057-01

Code [*for 6mmL Only] 8035-01S 8045-01S 8057-01S

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

8530-01

8035-01 *8035-01S

8045-01 *8045-01S

8057-01 *8057-01S

8530-13

8035-13

8045-13

8057-13

8530-15

8035-15

8045-15

8057-15

Healing Collars Requires 1.25mmD Hex Tools

Code 8530-13 8530-15 8035-13 8035-15 8045-13 8045-15 8057-13 8057-15

Platform 3.0mmD 3.0mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Width 3.8mmD 3.8mmD 4.8mmD 4.8mmD 5.8mmD 5.8mmD 6.6mmD­­ 6.6mmD

Length 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL 3mmL 5mmL

Closed-Tray Implant Transfers Includes Fixation Screw with 1.25mmD Hex

Code 8530-05 8035-05 8045-05 8057-05

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-41 1000-06 1000-06 1000-06

1000-41

8530-05

1000-06

8035-05

8045-05

8057-05

1000-26

8530-08

1000-10

8035-08

8045-08

8057-08

Open-Tray Implant Transfers Includes Fixation Screw with 1.25mmD Hex

Code 8530-08 8035-08 8045-08 8057-08

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-26 1000-10 1000-10 1000-10

Implant Analogs

Code 8530-06 8035-06 8045-06 8057-06

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

8530-06

Replacement Fixation Screws Requires 1.25mmD Hex

Code 1000-20S 1000-20 1000-41 1000-26 1000-26XL 1000-01S 1000-01 1000-06 1000-10 1000-10XL

Platform For 3.0mmD hexagon For 3.0mmD hexagon For 3.0mmD hexagon For 3.0mmD hexagon For 3.0mmD hexagon For 3.5, 4.5 & 5.7mmD hexagon For 3.5, 4.5 & 5.7mmD hexagon For 3.5, 4.5 & 5.7mmD hexagon For 3.5, 4.5 & 5.7mmD hexagon For 3.5, 4.5 & 5.7mmD hexagon

8035-06

8045-06

8057-06

Waxing Screw

Waxing Screw

Open-Tray Transfer & Waxing Screw Closed-Tray Transfer & Temporary Abutment

Short Angled Screw-Receiving Abutments Abutments

Open-Tray Transfer & Waxing Screw Closed-Tray Transfer & Temporary Abutment

Short Angled Screw-Receiving Abutments Abutments

1000-20S 1000-20 1000-41 1000-26 1000-26XL 1000-01S 1000-01 1000-06 1000-10 1000-10XL 3.0mmD Hex Platform

3.5, 4.5 & 5.7mmD Hex Platform

21

Straight Abutments & Ancillary Components

Scan Adapters

Code 8530-09P 8035-09P 8045-09P 8057-09P

Includes Fixation Screw {For use with Implant Direct design library}

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Straight Abutments

Code足 8530-21 8530-22 8530-23 8035-21 8035-22 8035-23 8045-21 8045-22 8045-23 8057-21 8057-22 8057-23

Collar Heights -

Replacement Screw 1000-20 1000-01 1000-01 1000-01

8530-09P

8035-09P

8045-09P

8057-09P

8530-21

8035-21

8045-21

8057-21

8530-22

8035-22

8045-22

8057-22

8530-23足足足

8035-23

8045-23

8057-23

Includes Transfer, Comfort Cap & Fixation Screw with 1.25mmD Hex

Platform 3.0mmD 3.0mmD 3.0mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD 5.7mmD

Collar Heights 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm

Use Analog 8537 8537 8537 3047 3047 3047 3057 3057 3057 3065 3065 3065

Straight Abutment Transfers

Code 8537-02 3047-02 3057-02 3065-02

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

8537-02

3047-02

3057-02

3065-02

3037-26

3047-26

3057-26

3065-26

8537

3047

3057

3065

3037-28

3047-28

3057-28

3065-28

Straight Abutment Comfort Caps

Code 3037-26 3047-26 3057-26 3065-26

Straight Abutment Analog

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Includes Castable Coping

Code 8537 3047 3057 3065

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Straight Abutment Castable Coping

Code 3037-28 3047-28 3057-28 3065-28

22

Abutment Width 3.7mmD 4.7mmD 5.7mmD 6.5mmD

Straight & Angled Contoured, Titanium & Zirconia Abutments

Straight Titanium Contoured Abutments

Code 8530-31 8530-32 8035-31 8035-32 8045-31 8045-32 8057-31 8057-32

Platform 3.0mmD 3.0mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm 1mm 2mm

Angled Titanium Contoured Abutments

Code 8530-51 8530-52 8035-51 8035-52 8045-51 8045-52 8057-51 8057-52

Includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-20 1000-20 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

8530-31

8035-31

8045-31

8057-31

8530-32

8035-32

8045-32

8057-32

8530-51

8035-51

8045-51

8057-51

8530-52

8035-52

8045-52

8057-52

Includes Fixation Screw with 1.25mmD Hex

Platform 3.0mmD 3.0mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Collar Heights .75mm 2mm .75mm 2mm .75mm 2mm .75mm 2mm

0°, 8° & 15° Zirconia Contoured Abutments

Replacement Screw 1000-20 1000-20 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

Includes Fixation Screw with 1.25mmD Hex

Code 8530-31C 8530-32C 8530-51-08C 8530-52-08C 8530-51-15C 8530-52-15C 8530-30CB

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm .5mm

Replacement Screw 1000-20 1000-20 1000-20 1000-20 1000-20 1000-20 1000-20

Code 8035-31C 8035-32C 8035-51-08C 8035-52-08C 8035-51-15C 8035-52-15C 8035-30CB

Platform 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm .5mm

Replacement Screw 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

Code 8045-31C 8045-32C 8045-51-08C 8045-52-08C 8045-51-15C 8045-52-15C 8045-30CB

Platform 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Angulation 0° 0° 8° 8° 15° 15° -

Collar Heights 1mm 2mm 1mm 2mm 1mm 2mm .5mm

Replacement Screw 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

8530-31C

8530-51-08C 8530-51-15C

8530-30CB

8530-32C

8530-52-08C 8530-52-15C

8035-31C

8035-51-08C 8035-51-15C

8035-30CB 8035-32C

8035-52-08C 8035-52-15C

8045-31C

8045-51-08C 8045-51-15C

8045-30CB

8045-32C

8045-52-08C 8045-52-15C

23

Engaging & Non-Engaging, Gold, Plastic & Titanium Abutments

Zirconia Preparation Kit

Burr block for easy customization of zirconia abutments.

Includes items for both shaping and polishing

Code ZRPREP

­­Straight Full-Contoured (HLA) Abutments

Code HLA3-4 HLA3-5 HLA4-5 HLA4-6 HLA5-6 HLA5-7

Platform 3.5mmD 3.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Gold Engaging Cast-to Abutments

Code 8530-40 8035-40 8045-40 8057-40

Collar Heights Collar Heights 1.0mm 1.0mm 1.0mm 1.0mm Collar Heights 1.0mm 1.0mm 1.0mm

Platform 3.5mmD 4.5mmD 5.7mmD Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Plastic Engaging Temporary Abutments

Code 8530-47 8035-47 8045-47 8057-47

Collar Heights -

24

HLA5-6

HLA3-5

HLA4-6

HLA5-7

Collar Heights -

8530-40

8035-40

8045-40

8057-40

Replacement Screw 1000-20 1000-01 1000-01

8530-41

8035-41

8045-41

Replacement Screw 1000-01 1000-01 1000-01

8035-44

8045-44

8057-44

Replacement Screw 1000-20 1000-01 1000-01 1000-01

8530-46

8035-46

8045-46

8057-46

8530-47

8035-47

8045-47

8057-47

8530-49

8035-49

8045-49

8057-49

Includes Fixation Screw with 1.25mmD Hex

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Replacement Screw 1000-20 1000-01 1000-01 1000-01

Includes Fixation Screw with 1.25mmD Hex

Collar Heights 1.0mm 1.0mm 1.0mm 1.0mm

Titanium Non-Engaging Temporary Abutments

Code 8530-49 8035-49 8045-49 8057-49

HLA4-5

Includes Fixation Screw with 1.25mmD Hex

Plastic Non-Engaging Castable Abutments

Code 8530-46 8035-46 8045-46 8057-46

HLA3-4

Includes Fixation Screw with 1.25mmD Hex

Platform 3.0mmD 3.5mmD 4.5mmD

Plastic Engaging Castable Abutments

Code 8035-44 8045-44 8057-44

Replacement Screw 1000-01 1000-01 1000-01 1000-01 1000-01 1000-01

Includes Fixation Screw with 1.25mmD Hex

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Gold Non-Engaging Cast-to Abutments

Code 8530-41 8035-41 8045-41

Includes Fixation Screw with 1.25mmD Hex

Replacement Screw 1000-41 1000-06 1000-06 1000-06

Includes Fixation Screw with 1.25mmD Hex

Collar Heights 1.0mm 1.0mm 1.0mm 1.0mm

Replacement Screw 1000-20 1000-01 1000-01 1000-01

LOCATOR® Abutments & Components

LOCATOR® Abutments

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

0mmL 8035-90-L 8045-90-L -

Requires LOCATOR Driver or Core Tool

1mmL 8530-91-L 8035-91-L 8045-91-L 8057-91-L

2mmL 8530-92-L 8035-92-L 8045-92-L 8057-92-L

3mmL 8530-93-L 8035-93-L 8045-93-L 8057-93-L

4mmL 8530-94-L 8035-94-L 8045-94-L 8057-94-L

5mmL 8530-95-L 8035-95-L 8045-95-L 8057-95-L

8035-90-L 8035-91-L 8035-92-L 8035-93-L 8035-94-L 8035-95-L

8530-91-L 8530-92-L 8530-93-L 8530-94-L 8530-95-L

8045-90-L 8045-91-L 8045-92-L 8045-93-L 8045-94-L 8045-95-L

8057-91-L 8057-92-L 8057-93-L 8057-94-L 8057-95-L

LOCATOR® Abutment Components

Retention 1.5 lbs 3.0lbs 5.0lbs 0 lbs 1.0 lb 2.0lbs 4.0lbs -

Description Xtra Light Ret Male Blue Xtra Light Ret Male Pink Male Clear Ext Range Male Gray Ext Range Male Red Ext Range Male Orange Ext Range Male Green Black Processing Male

4 Pack 1000-92B-L4 1000-92P-L4 1000-92C-L4 1000-92Z-L4 1000-92R-L4 1000-92E-L4 1000-92G-L4 1000-93-L4

20 Pack 1000-92B-L20 1000-92P-L20 1000-92C-L20 1000-92Z-L20 1000-92R-L20 1000-92E-L20 1000-92G-L20 1000-93-L20

Retention -

Description Processing Spacer

4 Pack 1000-100-L4

20 Pack 1000-100-L20

Retention -

Description Repl Dent Cap Male Assembly

4 Pack 1000-91-L4

10 Pack 1000-91-L10

Retention Assorted Assorted

Description Male Processing Pkg Ext Range Male Processing Pkg

1000-92B-L4 1000-92B-L20

1000-92R-L4 1000-92R-L20

1000-92P-L4 1000-92P-L20

1000-92E-L4 1000-92E-L20

1000-92C-L4 1000-92C-L20

1000-92G-L4 1000-92G-L20

1000-92Z-L4 1000-92Z-L20

1000-91-L4 1000-91-L10

1000-98SI-L1 1000-98SI-L2 1000-98SI-L10

1000-93-L4 1000-93-L20

10 Pack 2 Pack 1 Pack 1000-98SI-L1 1000-98SI-L2 1000-98SI-L10 1000-98S-L2 1000-98S-L10

1000-100-L4 1000-100-L20

1000-98S-L2 1000-98S-L10

LOCATOR® Abutment Transfer, Analogs and Alignment Tools

Code 1000-94-L4 1000-94-L20 1000-95-L4 1000-95-L20 1000-97-L4 4500-26 1000-99-L LDD LDDS LDT LDTS 1000-96-L 1000-96-LEA 1000-96-LCTD

Description Impression Coping 4 Pack Impression Coping 20 Pack Abutment Analog 4mmD 4 Pack Abutment Analog 4mmD 20 Pack Abutment Parallel Post 4 Pack Comfort Cap - 2ea Angle Measure Guide LOCATOR® Driver 29mm Handpiece LOCATOR® Driver 23mm Handpiece LOCATOR® Square Driver 21mm Wrench LOCATOR® Square Driver 15mm Wrench LOCATOR® Core Tool LOCATOR® Core Tool (End) Assembly (not shown) Denture Cap Removal Trephine Drill (not shown)

1000-99-L

1000-94-L4 1000-94-L20

1000-97-L4

4500-26

LDD LDDS

1000-95-L4 1000-95-L20

LDT LDTS

1000-96-L

25

simplyfixed SMART PACK, Ball Abutments & Components

Ball Abutments Includes Transfer & Comfort Cap-requires 1.25mmD Hex Tool

Platform 3.5mmD 4.5mmD 5.7mmD

2mmL 8035-72 8045-72 8057-72

4mmL 8035-74 8045-74 8057-74

8035-72 8035-74

8045-72 8045-74

8057-72 8057-74

Ball Abutment Components

Code 1000-81 1000-82 1000-83 1000-84 1000-85 1000-86 1000-87 1000-88

Description Ball Abutment Housing - 2ea Nylon Liner - 2ea Nylon Liner Transfer - 2ea Ball Abutment Transfer - 2ea Ball Abutment Analog Ball Abutment Tools Ball Abutment Comfort Cap - 2ea Ball Abutment Housing & Nylon Liner

simplyfixed SMART PACK

Code 8530-62K 8530-64K 8530-62-15SK 8530-63-15SK 8530-63-30SK 8035-61K 8035-62K 8035-62-15SK 8035-64-15SK 8035-63-30SK 8035-64-30SK 8045-61K 8045-62K 8045-62-15SK 8045-64-15SK 8045-63-30SK 8045-64-30SK 8057-61K 8057-62K

26

1000-81

1000-82

1000-83

1000-84

1000-85

1000-86

1000-87

1000-88

Includes Multi-Unit* Abutment, Abutment Analog, Transfer, Titanium Temporary Abutment, Comfort Cap, Fixation Screw

Collar Heights 2mm 4mm 2.5mm 3.5mm 3.5mm 1mm 2mm 2mm 4mm 3mm 4mm 1mm 2mm 2mm 4mm 3mm 4mm 1mm 2mm

Platform 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.0mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD 5.7mmD 5.7mmD

Angle 0° 0° 15° 15° 30° 0° 0° 15° 15° 30° 30° 0° 0° 15° 15° 30° 30° 0° 0°

Choose the convenience of a SMART PACK or select individual components à la carte

*Multi-Unit formerly Screw Receiving or Screw Retained

Multi-Unit Abutments & Components Multi-Unit* Abutments

Platform 3.0mmD 3.5mmD 4.5mmD 5.7mmD

Includes Transfer & Comfort Cap-requires 1.25mmD Hex Tool­­­

1mmL 8530-61 8035-61 8045-61 8057-61

2mmL 8530-62 8035-62 8045-62 8057-62

4mmL 8530-64 8035-64 8045-64 8057-64

8530-61 8530-62 8530-64

­­8035-61 ­­8035-62 ­­8035-64

8045-61 8045-62 8045-64

8057-61 8057-62 8057-64

Angled Multi-Unit* Abutments Includes Transfer & Comfort Cap-requires 1.25mmD Hex Tool­­­

Platform 3.0mmD 3.0mmD 3.0mmD 3.5mmD 3.5mmD 3.5mmD 3.5mmD 4.5mmD 4.5mmD 4.5mmD 4.5mmD

Collar Height 2.5mm 3.5mm 4.5mm 2mm 3mm 4mm 5mm 2mm 3mm 4mm 5mm

15º Angled 8530-62-15S 8530-63-15S 8035-62-15S 8035-63-15S 8035-64-15S 8045-62-15S 8045-63-15S 8045-64-15S -

Replacement Tops for Angled Abutments

Code 1000-70S

30º Angled 8530-63-30S 8530-64-30S 8035-63-30S 8035-64-30S 8035-65-30S 8045-63-30S 8045-64-30S 8045-65-30S

8530-62-15S 8530-63-15S

8035-62-15S 8035-63-15S 8035-64-15S

8045-62-15S 8045-63-15S 8045-64-15S

8530-63-30S 8530-64-30S

8035-63-30S 8035-64-30S 8035-65-30S

8045-63-30S 8045-64-30S 8045-65-30S

Includes Transfer & Comfort Cap

Description Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool] 1000-70S

Multi-Unit* Abutment Comfort Cap, Transfers & Analog Screws require 1.25mmD Hex Tool­­­

Code 1000-61 1000-62 1000-63 1000-09P 1000-68 4000-13 1000-14 1000-15

Prosthetic Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD -

Description Aluminum Analog Open-Tray Transfer plus Fixation Screw Closed-Tray Transfer plus Fixation Screw Multi-Unit Abutment Scan Adapter plus Fixation Screw Plastic Abutment Transfer - 2ea Plastic Comfort Cap - 2ea Replacement Open-Tray Fixation Screw - 2ea Replacement Closed-Tray Fixation Screw - 2ea

1000-61 1000-62

1000-63

1000-05

1000-65

1000-09P 1000-68 4000-13

Multi-Unit* Abutment Components Includes Fixation Screw [1000-05] with 1.25mmD Hex

Code 1000-05 1000-64 1000-65 1000-66 1000-67 1000-69

Prosthetic Platform 5.0mmD 5.0mmD 5.0mmD 5.0mmD 5.0mmD

Description Coping Replacement Fixation Screw - 2ea Gold Coping Titanium Coping Plastic Coping Gold & Plastic Coping Titanium Temporary Coping

*Multi-Unit formerly Screw Receiving or Screw Retained

Price $39.00 $80.00 $40.00 $35.00 $80.00 $35.00

1000-64

1000-66

1000-67 1000-69

27

Surgical & Prosthetic Instruments Surgical Trays

Code ST BST CST

Description Empty Surgical Kit for Legacy System Implants Basic Surgical Kit for Legacy System Implants Complete Surgical Kit for Legacy System Implants

ST

BST

CST

Guided Surgery Handle Kit & Accessories

Code G-HK DGDE SD2.3L SD2.8L G-Sleeve G-Sleeve-L

Handle Kit (Includes: guide handles, spacers & spacer tool) Drill Guide Drill Extender Pilot Drill with depth markings of 22, 25 and 28mm Pilot Drill with depth markings of 22, 25 and 28mm Guided Template Sleeve (small) Guided Template Sleeve (large)

Tapered Hex Tools

Code THT1.25 THT1.25S

Description 1.25mmD Tapered Hex Tool Long 1.25mmD Tapered Hex Tool Short

THT1.25

THT1.25S

Straight Hex Tools1 Square connection for use with Ratchet or Torque Wrench

Code HT1.25L HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S

28

Description 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Long (For use with Torque Wrench) 1.25mmD Straight Hex Tool Short (For use with Torque Wrench) 2.0mmD Hex Tool Long 2.0mmD Hex Tool Short 2.5mmD Hex Tool Long (with retentive O-ring) 2.5mmD Hex Tool Short (with retentive O-ring) 3.0mmD Hex Tool Long 3.0mmD Hex Tool Short

HT1.25

HT2.0

HT2.5

HT3.0

HT1.25S

HT2.0S

HT2.5S

HT3.0S

HT1.25L

1Refer to the simplyLegacy section (pages 10-12) for the simplyLegacy drivers. The simplyLegacy drivers are required for simplyLegacy implants.

Surgical & Prosthetic Instruments Hex Drills1 Latch head connection for use with Surgical Motor

Code HD1.25 HD2.0 HD2.5 HD3.0

Description 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill (with retentive O-ring) 3.0mmD Hex Drill

HD1.25

HD2.0

HD2.5

HD3.0

Ancillary Instruments

Code R TW30 TW35 SSH2.5 FMD PAR LDRILL DE TWM ABH LDD LDDS LDT LDTS 1000-96-L 1000-96-LEA 1000-96-LCTD

Motors

Description Ratchet 30Ncm Torque Wrench 35Ncm Torque Wrench 2.5mmD Stainless Steel Handle (with retentive O-ring) Fixture Mount Drill Paralleling Tool 2.8/2.3 Locator Drill Drill Extender Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm) Analog Holder LOCATOR Driver 29mm Handpiece LOCATOR Driver 23mm Handpiece LOCATOR Square Driver 21mm Wrench LOCATOR Square Driver 15mm Wrench LOCATOR Core Tool LOCATOR Core Tool (End) Assembly (not shown) Denture Cap Removal Trephine Drill (not shown)

R

TW30

TW35

SSH2.5

TWM

FMD

PAR

LDRILL

DE

ABH

LDD LDDS

LDT LDTS

1000-96-L

Accessories are sold separately

Code 2027 2016

Description 40’000rpm surgical, single motor system incl. 20:1 CA 50’000rpm surgical, dual motor system incl. 32:1 CA

MD11

1Refer to the simplyLegacy section (pages 10-12) for the simplyLegacy drivers. The simplyLegacy drivers are required for simplyLegacy implants.

MD30

29

Surgical Drills SD2.3

SD2.3S

SD2.8

SD2.8S

SD3.4

SD3.4S

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

­­­SD4.8S

CBD5.2

CBD3.2

3.2mmD Implants

Code SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2

Description 2.3/2.0mmD Step Drill with 6-16 markings 2.3/2.0mmD Step Drill with 6-10 markings 2.8/2.3mmD Step Drill with 6-16 markings 2.8/2.3mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.0 and 3.2mmD Implants

3.7mmD Implants

Code SD3.4 SD3.4S CBD3.7

Description 3.4/2.8mmD Step Drill with 6-16 markings 3.4/2.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 3.7mmD Implants

4.2mmD Implants

Code SD3.8 SD3.8S CBD4.2

Description 3.8/3.4mmD Step Drill with 6-16 markings 3.8/3.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.2mmD Implants

4.7mmD Implants

Code SD4.4 SD4.4S CBD4.7

Description 4.4/3.8mmD Step Drill with 6-16 markings 4.4/3.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 4.7mmD Implants

5.2mmD Implants

Code SD4.8 SD4.8S CBD5.2

Description 4.8/4.4mmD Step Drill with 6-16 markings 4.8/4.4mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.2mmD Implants D5.1

5.7 & 7.0mmD Implants

Code D5.1 D5.1S SD5.4 SD5.4S CBD5.7 CBD7.0

30

Description 5.1mmD Straight Drill with 6-16 markings 5.1mmD Straight Drill with 6-10 markings 5.4/4.8mmD Step Drill with 6-16 markings 5.4/4.8mmD Step Drill with 6-10 markings Cortical Bone Drill for 5.7mmD Implants Cortical Bone Drill for 7.0mmD Implants

D5.1S

SD5.4

SD5.4S

CBD5.7

CBD7.0

Drill Sequence 3.2mm Diameter Soft Bone Final

Dense Bone Final

Optional Bone Contour

3.0/3.2

SD2.8

CBD3.2

2.3/2.0mmD

2.8/2.3mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD2.3

3.7mm Diameter 3.5/3.7

SD2.3

SD3.4

CBD3.7

2.8/2.3mmD

3.4/2.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD2.8

2.3/2.0mmD

4.2mm Diameter Optional

3.5/4.2

SD2.3

2.3/2.0mmD

3.4/2.8mmD

SD3.8

CBD4.2

2.8/2.3mmD

3.8/3.4mmD

Optional

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD2.8

SD3.4

4.7mm Diameter 4.5/4.7

SD2.3

2.3/2.0mmD

SD2.8

2.8/2.3mmD

SD4.4

CBD4.7

3.8/3.4mmD

4.4/3.8mmD

Soft Bone Final

Dense Bone Final

Optional Bone Contour

SD4.8

CBD5.2

Dense Bone Final

Optional Bone Contour for 5.7mmD

Optional Bone Contour for 7.0mmD

SD5.4

CBD5.7

CBD7.0

SD3.8

SD3.4

3.4/2.8mmD

5.2mm Diameter Optional

Optional

4.5/5.2

SD2.3

2.3/2.0mmD

SD2.8

2.8/2.3mmD

SD3.4

3.4/2.8mmD

SD4.4

SD3.8

4.4/3.8mmD

3.8/3.4mmD

4.8/4.4mmD

5.7 & 7.0mm Diameter Optional

5.7/5.7

Optional

Optional

Soft Bone Final

5.7/7.0

SD2.3

2.3/2.0mmD

SD2.8

2.8/2.3mmD

SD3.4

3.4/2.8mmD

SD3.8

3.8/3.4mmD

SD4.4

4.4/3.8mmD

SD4.8

4.8/4.4mmD

D5.1

5.1mmD

5.4/4.8mmD

31

Surgical Trays

Lid

Code ST SD2.3 SD2.3S SD2.8 SD2.8S CBD3.2 SD3.4 SD3.4S CBD3.7 SD3.8 SD3.8S CBD4.2 SD4.4 SD4.4S CBD4.7 SD4.8 SD4.8S CBD5.2 D5.1 D5.1S SD5.4 SD5.4S CBD5.7 THT1.25 THT1.25S HT1.25 HT1.25S HT2.0 HT2.0S HT2.5 HT2.5S HT3.0 HT3.0S HD1.25 HD2.0 HD2.5 HD3.0 FMD LDRILL DE R PAR (x4) SSH2.5

32

Empty Tray

Inside

Surgical Tray Contents Description Empty Surgical Tray 2.3/2.0mmD Step Drill-Long 2.3/2.0mmD Step Drill-Short 2.8/2.3mmD Step Drill-Long 2.8/2.3mmD Step Drill-Short 3.2mmD Cortical Drill 3.4/2.8mmD Step Drill-Long 3.4/2.8mmD Step Drill-Short 3.7mmD Cortical Drill 3.8/3.4mmD Step Drill-Long 3.8/3.4mmD Step Drill-Short 4.2mmD Cortical Drill 4.4/3.8mmD Step Drill-Long 4.4/3.8mmD Step Drill-Short 4.7mmD Cortical Drill 4.8/4.4mmD Step Drill-Long 4.8/4.4mmD Step Drill-Short 5.2mmD Cortical Drill 5.1mmD Straight Drill-Long 5.1mmD Straight Drill-Short 5.4/4.8mmD Step Drill-Long 5.4/4.8mmD Step Drill-Short 5.7mmD Cortical Drill Hex Tools 1.25mmD Tapered Hex Tool-Long 1.25mmD Tapered Hex Tool-Short 1.25mmD Straight Hex Tool-Long 1.25mmD Straight Hex Tool-Short 2.0mmD Straight Hex Tool-Long 2.0mmD Straight Hex Tool-Short 2.5mmD Straight Hex Tool-Long 2.5mmD Straight Hex Tool-Short 3.0mmD Straight Hex Tool-Long 3.0mmD Straight Hex Tool-Short 1.25mmD Hex Drill 2.0mmD Hex Drill 2.5mmD Hex Drill 3.0mmD Hex Drill Ancillary Instrumentation Fixture Mount Drill Locator Drill Drill Extender Ratchet Paralleling Tool 2.8/2.3 2.5mmD Stainless Steel Handle

Complete Kit

Basic Kit

X X X X X X X X X X X X X X X X X X X X X X X

X X

X X X X X X X X X X X X X X

X

X X X X X X

X X X X X X X

X X X X X X

X X X X

Complete Surgical Tray Contents

SD2.8

SD2.8S

CBD3.2

SD3.4

SD3.4S

CBD3.7

SD3.8

SD3.8S

CBD4.2

SD4.4

SD4.4S

CBD4.7

SD4.8

SD4.8S

CBD5.2

D5.1

D5.1S

SD5.4

SD5.4S

SD2.3 SD2.3S

CBD5.7

THT1.25

THT1.25S

HT1.25

HT1.25S

HT2.0

HT2.0S

HT2.5

HT2.5S

HT3.0

lower level of surgical tray

HT3.0S

LDRILL

DE

R

FMD

HD1.25

HD2.0

HD2.5

HD3.0

PAR (4) SSH2.5

33

Your Trusted Biomaterial Provider

CytoPlast® TXT

Kontour™ Adapt

DirectGen™ Vilet™ Suture

...and more.

Sales and Technical Support (USA & Canada) www.implantdirect.com | 888-649-6425

*12.5-02-17-0041* 12.5K-02-17-0041 Rev. 10

Printed in the U.S.A. Copyright © 2017 Implant Direct Sybron International. All Rights Reserved

All trademarks are property of their respective companies. Not all products shown are available in all countries and product availability is subject to change without notice.