What Are the Steps to Install Suspended Plasterboard Ceiling

What Are the Steps to Install Suspended Plasterboard Ceiling?

Most people complain about having damaged ceilings in their home, workspace, or other room. It is a fact that the roof is your fifth wall and significant addition to your space. It is the ceiling that provides coverage over your head. Having a damaged and broken roof is the last thing you want in your home. A damaged roof means troubling yourself whenever it is raining.

Know that damaged ceilings can also participate in mold and other problems.

You have to treat your damaged ceiling as soon as you see any fault in it. It is better to resolve the damage quickly. It will help you minimize the trouble and the cost of repairing.

Nowadays, a suspended ceiling is trending in the architectural world. There are many pros to opting for a drop ceiling in your space. Installing a suspended ceiling is easy and requires no extra effort. All you need is a bit of experience in interior work, and you can install it without any problem. There are many materials that you can use for your drop ceiling. Out of all the materials, plasterboard ceiling cost per square metre is the lowest. The plasterboard is effortless to install. It is better to opt for a drop ceiling because

it is better for decorating purposes. With a drop ceiling, you can get plenty of space to hide the ducts, wires, and other items.

A suspended ceiling is the best to get a clean and finished look in your space.

The hanging wires can destroy the overall look of the area. That is why a suspended ceiling is often a dire need for commercial purposes. Because of the limitless advantages, a suspended ceiling is getting popular and a must-have solution each day. You are on the right page to learn how to install the drop plasterboard ceiling. Below is a step-by-step and effortless guide that can help you understand the entire process.

1. What do you need?

Before you head on to the process, you have to know what you need for installing the suspended ceiling. You need a set of tools and instruments for the plasterboard ceiling. The things you need are as follows: 

Ceiling board



Adhesive



Nails



Screws



Trimming knife



Measuring tape



Pencil



Saw



Hammer



drill

2. Measuring the size of Suspended Plasterboard Ceiling: The first step to installing the drop ceiling in your area is getting the right size of the space. You have to cut the plasterboard according to the size. That is the sole reason you need to measure the size of your area. It is better to measure the suitable width of the ceiling. Any mistake in the measuring can destroy the

entire process. The cutting of your plasterboard will depend upon the measurement of the size.

3. Cutting the plasterboard: After the measurement of suspended plasterboard ceiling, you have to cut the plasterboard. You have to take a sharp knife to trim the plasterboard. You need to try and cut the plasterboard in a clean shape. Any problem in the cutting can destroy the installation of the stop ceiling. It is better to cut the plasterboard by holding the T-Square firmly against the plasterboard. You have to fold the board to separate it from the whole piece for complete cutting.

Know that the tip to a fine cut is measured twice and cut once. When you cut the plasterboard twice, you can cut rough.

4. Cut holes when you need: The next step is to cut the holes in the plasterboard where you need it. You need to measure the place for the wires and other electrical items. Mark the space and cut a fine hole.

5. Ceiling joists: Now is the time to install the ceiling joist. At first, you have to mark the location on the walls. You can use adhesive for the ceiling joists. After that, install the ceiling plasterboard and screw the sheets. You can use the screws to fasten the sheets. You have to make sure that you keep the minimum two to three inches distance between the old ceiling and the plasterboard.

6. Safety tips: 

Wear glasses to protect your eyes from any dust.



You also need to wear gloves while using sharp tools.