AVP CATALOGUE ENGLISH by lola calero

Mosaic Jackfield Systems

Years

Since 1985

AVP MFG & Supply Inc.

v1.1

AMS25

Mosaic AMS25

AVP Mosaic audio and video patching components provide exceptional functionality and circuit identification standards to simplify system design, installation, operation and maintenance. Key Mosaic Features: • CIS (Circuit Identification System) allows color-coding of every circuit to visually identify each circuit by color • Patented designation design maximizes viewable area • Numbered jack positions for quick and accurate installation, system troubleshooting and operational ease • Front-mount jacks simplify system re-design and maintenance AVP suggests the use of the following color code to indicate various normaling options in Mosaic jackfields and patchbays. You are not limited to this color coding, as indicators are available in 10 colors. Our customers have found they are able to quickly determine the operation of each circuit by using the following standard: Red: Full Normals: Red coding is used for ‘full normals’ (normals strapped) to designate STOP and be sure of your action because patching a full normalled jack will cause you to lose a circuit. Yellow: Half Normals (audio): Yellow coding signifies patching into ‘half normaled’ positions, and CAUTIONS that patching the input (bottom jack) will break the path, while it is safe to patch into the top (output) without breaking the path. Green: No Normals: Green coding indicates a ‘non normaled’ circuit, GO-ahead and patch, nothing to lose!

AVP Circuit Identification System (CIS) Allows Specific Circuit Identification

… see page 41

Full Normals Half Normals No Normals Mosaic jackfields are shipped with normaling type identified by color, but interchangeable Indicators are available in 10 colors so you can color-code your system according to your own system design. (easily identify critical circuits, signal type etc)

www.jackfields.com

BLACK

BROWN

RED

ORANGE

YELLOW

GREEN

BLUE

PURPLE

GRAY

WHITE

Patent information: see inside back cover.

Table of Contents AMS25 AVP Mosaic Video Microsize, Midsize and Standard Size, Features & Benefits Video Jack Specifications Microsize Video Jackfields Midsize Video Jackfields 3x32 Midsize Video Monitor Jackfield Standard Size Video Jackfields Color-Coded RGB; 2RU, 2x24, 8 Normaled Circuits Video Jackfield Designation Layouts AVP Mosaic Audio Rapid Punch Terminal System (RPT) - Common Sense, Unsurpassed Performance Features and Benefits Longframe, Full Enclosure & Umbilical Jackfields Longframe Full Enclosure & Umbilical Designation Layouts Bantam, Full Enclosure & Umbilical Jackfields Bantam Full Enclosure & Umbilical Designation Layouts Rack-Mount Terminal Panels Wall-Mount Punch Block System Morph Audio System with EDAC/ELCO 3Pin Interface Morph Audio Features & Benefits Morph Audio, Longframe Jackfields Morph Audio, Bantam Jackfields Morph Audio, Longframe & Bantam Designation Layouts Audio/Video/Data Combo Panel - HDTV, AES/EBU Audio & RS422 Patching Audio/Video/Data Combo Panel Features & Benefits Audio/Video/Data Combo Panel Designation Layouts Connectorized 90 Pin - AES/EBU Digital & Analog Audio Patching Connectorized 90 Pin Full Enclosure Bantam Connectorized 90 Pin Full Enclosure Longframe Connectorized 90 Pin Bantam Designation Layouts Connectorized 90 Pin Longframe Designation Layouts Jack and Panel Assemblies Bantam, Longframe & Designation Layouts AVP Audio Jack Specifications - Longframe & Bantam Circuit Identification System Datapatch/RS422 Patching System - Durable Polarity Protected Patching Features & Benefits, Designation Layouts Bulkhead Panels BNC-BNC Non & Semi-Recessed; F-F Connectors XLR, TRI-LOC Universal Bulkhead System - Design Your Own Bulkhead; 12 & 16 Positions Universal Bulkhead System Designation Layouts Modular Bulkhead - Split Mounting Plates allow Post-Termination Panel Mounting Switchboard Style Patch System Panel Dimensions & Designation Layouts Hinged Access Bulkhead Frame - Shallow or Space Constricted Rack Solution Patchcords Audio Normaling Video Normaling

2 3 4 5 6 7 6 8-9

Table of Contents

10 - 11 12 15 16 18 - 19 20 21-23 24 - 25 26 27 28 - 29 30 32 33 34 35 28 36 - 40 41 41 42 - 43 44 - 45 46 47 - 49 49 50 - 52 51 52 53 54 55 56

Years

Since 1985

Inside Back Cover Back Cover

Index Contact Information

www.jackfields.com

AVP MFG & Supply Inc.

Patent information: see inside back cover.

Video Jacks & Panels 1 RU

Mosaic Video Jackfields

1.5 RU

• Front-mount 3.0GHz - 3Gb/s Micro Dual Video Jacks meet SMPTE 424M-2006 specifications • Industry Standard DIN 1.0/2.3 rear termination Microsize • Allows 48 channels / 96 patchpoints in a 1RU, 19” rack or 96 channels / 192 patchpoints in a 1.5RU, 19” rack • Design is based on our very successful, market proven midsize & standard size video jacks, with over a half million jacks in the field • Life Cycle rating of 20,000 • Multiple jack configurations available • Made & assembled in Canada/USA

1.5 RU

Jacks

2 RU 1

Microsize Jacks

1 RU

1.5 RU

Featuring: • SuperHD+ 3.0GHz - 3Gb/s Standard or Midsize jacks Midsize • Jacks meet SMPTE 424M-2006 HDTV specifications • Life Cycle rating of 30,000 • Various normaling & terminating combinations for all applications • 1RU, 1.5RU or 2RU Mosaic panels • Made & assembled in Canada/USA Application: • HDTV, Serial Digital, Analog

Jacks

2 RU

Midsize Jacks

Features & Benefits 1 RU

1.5 RU

AVP Mosaic Panel

www.jackfields.com

2 RU

• Front-mount jacks simplify system re-design & maintenance • Numbered jack positions for quick and accurate installation, system troubleshooting & operational ease • Patented designation design maximizes viewable area • CIS (Circuit Identification System), allows color-coding of every circuit

Standard Jacks Standard Jacks

Captive screws stay in the panel, not lost in the rack

Patent information: see inside back cover.

Video 3.0GHz - 3Gb/s SMPTE 424M-2006

3.0GHz - 3Gb/s Microsize Dual Video Jack Specifications Smith Chart

AVP-KMN75

AVP-KM75

AVP-KMN

AVP-KM

3.0GHz Normaled Terminating

3.0GHz Non-Normaled Terminating

3.0GHz Normaled Non-Terminating

3.0GHz Non-Normaled Non-Terminating

Electrical:

Operating Temperature: Storage Temperature: Thermal Shock: Moisture and Humidity: RoHS:

-40°C to 65°C -40°C to 65°C Per MIL-STD-202, Method 107 Per MIL-STD-202, Method 106 RoHS Compliant

Material: Housing: Center Contacts: Switching Contacts: Grounding Contacts: Actuators: Insulators:

Zinc alloy, nickel plated Copper alloy, gold plated Copper alloy, gold plated Copper alloy, gold plated Thermoplastic, UL 94V-0 rated Teflon

(Typical)

0 -5 -10

Good

Vibration: Life cycle:

Stop 3.0 GHz

Insertion Loss

Per MIL-STD-202, Method 213, Test condition I Per MIL-STD-202, Method 201 20,000 minimum

-15 -20

Microsize Video Jacks Configurations and Specifications

-25

AVP-KMN75 AVP-KMN AVP-KM75 AVP-KM 0

600

1200

1800

2400

3000

Frequency (MHz)

Return Loss

(Typical) AVP-KMN75 AVP-KMN AVP-KM75 AVP-KM

0 -5

Good

Environmental:

Start 300 kHz

Mechanical Shock:

Insertion Loss (dB)

Characteristic Impedance: Contact Resistance: Termination Resistance:

Mechanical: 3.0GHz - 3Gb/s: meets HDTV SMPTE 424M-2006 Specification 75 Ohms Less than 50 milliohms 75 Ohms ± 1%

Return Loss (dB)

Rated Bandwidth:

(Typical) AVP-KMN75 AVP-KMN AVP-KM75 AVP-KM

75 Ohms

-10 -15 -20 -25 -30 -35 0

600

1200

1800

2400

3000

Frequency (MHz)

3.0GHz - 3Gb/s Midsize Dual & Single Video Jack Specifications Smith Chart

AVP-AM75 Non-Normaled, Terminating

Electrical:

Mechanical:

-40°C to 65°C -40°C to 65°C Per MIL-STD-202, Method 107 Per MIL-STD-202, Method 106 Compliant

Start 30 kHz

Insertion Loss

-10 -15 -20 -25

AVP-AMN75 AVP-AMN AVP-AM75 AVP-AM 0

Zinc alloy, nickel plated Copper alloy, gold plated Copper alloy, gold plated Copper alloy, gold plated Thermoplastic, UL 94V-0 rated Teflon

(Typical)

0 -5

Material: Housing: Center Contacts: Switching Contacts: Grounding Contacts: Actuators: BNC Insulators:

Stop 3.0 GHz

Good

Per MIL-STD-202, Method 213, Test condition 1 Per MIL-STD-202, Method 201 7 lbs. maximum 3 lb. minimum 30,000 minimum

Mechanical Shock: . Vibration: Insertion Force: Withdrawal Force: Life cycle:

600

1200

1800

2400

3000

Frequency (MHz)

Return Loss

(Typical) AVP-AMN75 AVP-AMN AVP-AM75 AVP-AM

0 -5

Good

3.0GHz - 3Gb/s: meets HDTV SMPTE 424M-2006 Specification 75 Ohms See typical Return Loss chart See typical Insertion Loss chart Less than 50 milliohms 75 Ohms ± 1% Accepts 0.048” pin diameter

Environmental: Operating Temperature: Storage Temperature: Thermal Shock: Moisture and Humidity: RoHS:

AVP-AM Non-Normaled, Non-Terminating

Insertion Loss (dB)

Rated Bandwidth: . Characteristic Impedance: Return Loss: Insertion Loss: Contact Resistance: Termination Resistance: Center Conductor:

AVP-AMN Normaled, Non-Terminating

Return Loss (dB)

AVP-AMN75 Normaled, Terminating

Midsize Video Jacks Configurations and Specifications

(Typical) AVP-AMN75 AVP-AMN AVP-AM75 AVP-AM

75 Ohms

-10 -15 -20 -25 -30 -35 0

600

1200

1800

2400

3000

Frequency (MHz)

AVP-AMSL Non-Normaled, Non-Terminating

AVP-AMSS Non-Normaled, Non-Terminating

AVP-AMSL75 Non-Normaled, Terminating

AVP-AMSS75 Non-Normaled, Terminating

3.0GHz - 3Gb/s Standard Dual Video Jack Specifications Smith Chart

Standard Video Jacks Configurations and Specifications

(Typical)

75 Ohms ASN7511B

AVP-ASN7511 Normaled Terminating

AVP-AS7511 Non-Normaled Terminating

AVP-AS11 Non-Normaled Non-Terminating

AVP-ASN11 Normaled Non-Terminating

Start 30 kHz

Stop 3.0 GHz

Insertion Loss

Environmental: Operating Temperature: Storage Temperature: Thermal Shock: Moisture and Humidity: RoHS:

www.jackfields.com

-40°C to 65°C -40°C to 65°C Per MIL-STD-202, Method 107 Per MIL-STD-202, Method 106 Compliant

Mechanical Shock: Vibration: Insertion Force: Withdrawal Force: Life cycle:

-10

Good

3.0GHz - 3Gb/s: meets HDTV SMPTE 424M-2006 Specification 75 Ohms See typical Return Loss chart See typical Insertion Loss chart Less than 50 milliohms 75 Ohms ± 1% Accepts 0.090” pin diameter

-15 -20 -25

600

1200

1800

Zinc alloy, nickel plated Copper alloy, gold plated Copper alloy, gold plated Copper alloy, gold plated Thermoplastic, UL 94V-0 rated Teflon

2400

3000

Frequency (MHz)

Return Loss

Material: Housing: Center Contacts: Switching Contacts: Grounding Contacts: Actuators: BNC Insulators:

(Typical)

-5

(Typical)

0 -5

Good

Characteristic Impedance: Return Loss: Insertion Loss: Contact Resistance: Termination Resistance: Center Conductor:

Return Loss (dB)

Rated Bandwidth:

Per MIL-STD-202, Method 213, Test condition I Per MIL-STD-202, Method 201 12 lbs. maximum 3 lbs. minimum 30,000 minimum

Insertion Loss (dB)

Mechanical:

Electrical:

-10 -15

Ordering Information (over)

-20 -25 -30 -35 0

600

1200

1800

Frequency (MHz)

2400

3000

Video jack schematics... page 56

Patent information: see inside back cover.

Video Ordering Information

3.0GHz - 3Gb/s Micro Video Jackfield

A V

Panel Configuration 2 2x48 (48 Dual Jacks) 4 4x48 (96 Dual Jacks)

Installed Front-mount Jack Type KMN75 KM75 KMN KM Z

Number of Jacks Across 48 48 Jacks

3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 None (empty panel)

Normaled, Terminating, dual jack Non-Normaled, Terminating, dual jack Normaled, Non-Terminating, dual jack Non-Normaled, Non-Terminating, dual jack

Microsize Video Ordering Information

Panel Height

1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Options, add to end of Model Number -BAR Heavy-duty 7.0” [178mm]Cable Bar

Optional Heavy-duty Cable Bar

Popular Models Model Description Complete Jackfields - 3.0GHz - 3Gb/s normaled terminating (KMN75) 48 KMN75 normaled terminating front-mount jacks 2x48 Panel, 1RU AV-K248E1-KMN75 2x48 Panel, 1.5RU 48 KMN75 normaled terminating front-mount jacks AV-K248E15-KMN75 4x48 Panel, 1.5RU 96 KMN75 normaled terminating front-mount jacks AV-K448E15-KMN75 48 KMN75 normaled terminating front-mount jacks 2x48 Panel, 2RU AV-K248E2-KMN75 Complete Jackfields - 3.0GHz - 3Gb/s non-normaled terminating (KM75) 48 KM75 non-normaled terminating front-mount jacks 2x48 Panel, 1RU AV-K248E1-KM75 2x48 Panel, 1.5RU 48 KM75 non-normaled terminating front-mount jacks AV-K248E15-KM75 4x48 Panel, 1.5RU 96 KM75 non-normaled terminating front-mount jacks AV-K448E15-KM75 48 KM75 non-normaled terminating front-mount jacks 2x48 Panel, 2RU AV-K248E2-KM75 Empty Panels 2x48 Panel, 1RU, empty, for front-mount jacks AV-K248E1-Z 2x48 Panel, 1.5RU, empty, for front-mount jacks AV-K248E15-Z 4x48 Panel, 1.5RU, empty, for front-mount jacks AV-K448E15-Z 2x48 Panel, 2RU, empty, for front-mount jacks AV-K248E2-Z Designation Layouts... page 8 Microsize Video Patchcords 1’ 1.5’ 2’ 3’ 4’ 6’ 10’

300mm 450mm 600mm 900mm 1200mm 1800mm 3.05m

KPC-1-BLACK KPC-1.5-BLACK KPC-2-BLACK KPC-3-BLACK KPC-4-BLACK KPC-6-BLACK KPC-10-BLACK

KPC-1-RED KPC-1.5-RED KPC-2-RED KPC-3-RED KPC-4-RED KPC-6-RED KPC-10-RED

KPC-1-GREEN KPC-1.5-GREEN KPC-2-GREEN KPC-3-GREEN KPC-4-GREEN KPC-6-GREEN KPC-10-GREEN

KPC-1-BLUE KPC-1.5-BLUE KPC-2-BLUE KPC-3-BLUE KPC-4-BLUE KPC-6-BLUE KPC-10-BLUE

KPC-1-YELLOW KPC-1.5-YELLOW KPC-2-YELLOW KPC-3-YELLOW KPC-4-YELLOW KPC-6-YELLOW KPC-10-YELLOW

KPC-1-PURPLE KPC-1.5-PURPLE KPC-2-PURPLE KPC-3-PURPLE KPC-4-PURPLE KPC-6-PURPLE KPC-10-PURPLE

Microsize Video Patchcords 3GHz

*more patchcords available on page 54

www.jackfields.com

Patent information: see inside back cover.

Video Ordering Information

3.0GHz - 3Gb/s Midsize Video Jackfield

D 2

E Installed Jack Type

Series A Mosaic T Mosaic (Black CIS)

AMN75 AM75 AMN AM AMSL75 AMSS75 AMSL AMSS Z

Panel Hole Configuration 32 2 x 32 34 2 x 34 Rack Space 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 None (empty panel)

Normaled, Terminating Non-Normaled, Terminating Normaled, Non-Terminating Non-Normaled, Non-Terminating Terminating, single long Terminating, single short Non-Terminating, single long Non-Terminating, single short

Midsize Video Ordering Information

Options, add to end of Model Number -BAR Heavy-duty Cable Bar - not available on 1RU 2x34 panels

Designation Layouts... page 9

Popular Models Model Description Complete Jackfields - 3.0GHz - 3Gb/s normaled terminating (AMN75) AV-D232E1-AMN75 1RU, 2x32 Captive Screw Panel 32 AMN75 normaled terminating jacks 2RU, 2x32 Captive Screw Panel 32 AMN75 normaled terminating jacks AV-D232E2-AMN75

Complete Jackfields - 3.0GHz - 3Gb/s non-normaled terminating (AM75) 1RU, 2x32 Captive Screw Panel 32 AM75 non-normaled terminating jacks AV-D232E1-AM75 2RU, 2x32 Captive Screw Panel 32 AM75 non-normaled terminating jacks AV-D232E2-AM75 Empty Panels AV-D232E1-Z AV-D232E2-Z

1RU, 2x32 Captive Screw Panel, empty 2RU, 2x32 Captive Screw Panel, empty

Midsize Video Patchcords 1’ 1.5’ 2’ 3’ 4’ 6’ 10’

300mm 450mm 600mm 900mm 1200mm 1800mm 3.05m

MPC-1-BLACK MPC-1.5-BLACK MPC-2-BLACK MPC-3-BLACK MPC-4-BLACK MPC-6-BLACK MPC-10-BLACK

MPC-1-RED MPC-1.5-RED MPC-2-RED MPC-3-RED MPC-4-RED MPC-6-RED MPC-10-RED

MPC-1-GREEN MPC-1.5-GREEN MPC-2-GREEN MPC-3-GREEN MPC-4-GREEN MPC-6-GREEN MPC-10-GREEN

MPC-1-BLUE MPC-1.5-BLUE MPC-2-BLUE MPC-3-BLUE MPC-4-BLUE MPC-6-BLUE MPC-10-BLUE

MPC-1-YELLOW MPC-1.5-YELLOW MPC-2-YELLOW MPC-3-YELLOW MPC-4-YELLOW MPC-6-YELLOW MPC-10-YELLOW

MPC-1-PURPLE MPC-1.5-PURPLE MPC-2-PURPLE MPC-3-PURPLE MPC-4-PURPLE MPC-6-PURPLE MPC-10-PURPLE

Midsize Video Patchcords 3GHz

*more patchcords available on page 54

www.jackfields.com

Patent information: see inside back cover.

Video 3x32 Video Monitor 3.0GHz - 3Gb/s Color-Coded RGB Circuits

Midsize 3x32 Video Monitor 3.0GHz - 3Gb/s Features • Exceptional performance in HDTV, serial digital and analog applications • 3.0GHz - 3Gb/s Midsize dual and single video jacks meet SMPTE 424M-2006 specifications • Life cycle rating of 30,000 • Dual jacks available in normaling and non-normaling configurations • Single jacks available in terminating and non-terminating configurations • Numbered jack positions front and rear for quick and accurate installation, system troubleshooting and operational ease • Patented designation design maximizes viewable height, 0.760” (19.30mm) • Front-mount jacks simplify system re-design & maintenance • Numbered jack positions for quick and accurate installation, system troubleshooting & operational ease • Patented designation design maximizes viewable area • CIS (Circuit Identification System), allows color-coding of every circuit

AVP Mosaic Panel

Captive screws stay in the panel, not lost in the rack

Video Jack Specifications... page 3 Designation Layout... page 8 Patchcords available... page 54

Popular Models Ordering Information Model

Description

AV-D332E2-AMN75/AMS75

2RU, 3x32. - 2x32 3.0GHz - 3Gb/s, 75 Ohm, normaled, terminating midsize video jacks, with 1x32 monitor row of 3.0GHz - 3Gb/s, 75 Ohm, non-normaled, terminating midsize single video jacks 2RU, 3x34. - 2x34 3.0GHz - 3Gb/s, 75 Ohm, normaled, terminating midsize video jacks, with 1x34 monitor row of 3.0GHz - 3Gb/s, 75 Ohm, non-normaled, terminating midsize single video jacks

AV-D334E2-AMN75/AMS75 Options, add to end of model number -BARx

Ordering Information

Heavy-duty Cable Bar; x - specify 1 or 2 Bars; T - at top, B - at bottom, eg; -BART, -BARB, -BAR2

Color-Coded RGB Circuits Color-Coded RGB Circuits • 8 normaled RGB Circuits • 3.0Ghz - 3Gb/s standard size dual video jacks meet SMPTE 424M-2006 specifications • Life cycle rating of 30,000 • 4 different jack configurations available • Exceptional performance in HDTV, Serial Digital & Analog applications Popular Models

VJF-RGB-2 Designation Layouts... page 8

Patchcords

Model

Description

Model

Description

VJF-RGB-2 VPP-24K-RGB-2

2RU, 2x24, RGB Jackfield, 8 Normaled RGB Circuits 2RU, 2x24, RGB Panel, Empty

VPC-RGB-2 VPC-RGB-3 VPC-RGB-4

2’, 600mm RGB Component Patchcord 3’, 900mm RGB Component Patchcord 4’, 1200mm RGB Component Patchcord

www.jackfields.com

Ordering Information

Patent information: see inside back cover.

Video Standard Size Video Jackfields

3.0GHz - 3Gb/s Standard Size Video Jack

Standard Size Video 1 RU

1.5 RU

Mosaic standard size video panels also accept AVP longframe audio jacks using the same captive screw system V

C 2

2 RU

Standard Jacks … see page 41

E Installed Jack Type

Series A Mosaic T Mosaic (Black CIS)

ASN7511 AS7511 ASN11 AS11 Z

Number of Dual Jacks 24 24 Jacks 26 26 Jacks 28 28 Jacks

3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 3.0Ghz - 3Gb/s 75 None (empty panel)

Normaled, Terminating Non-Normaled, Terminating Normaled, Non-Terminating Non-Normaled, Non-Term.

Ordering Information

Options, add to end of Model Number

Rack Space 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

-BAR Heavy-duty Cable Bar, - not available on 1RU 2x28 panels

Designation Layouts... page 9

Popular Models Model Description Complete Jackfields - 3.0GHz - 3Gb/s normaled terminating (ASN7511) AV-C224E1-ASN7511 1RU, 2x24 Captive Screw Panel, 24 ASN7511 normaled terminating jacks 2RU, 2x24 Captive Screw Panel, 24 ASN7511 normaled terminating jacks AV-C224E2-ASN7511 Complete Jackfields - 3.0GHz - 3Gb/s non-normaled terminating (AS7511) 1RU, 2x24 Captive Screw Panel, 24 AS7511 non-normaled terminating jacks AV-C224E1-AS7511 2RU, 2x24 Captive Screw Panel, 24 AS7511 non-normaled terminating jacks AV-C224E2-AS7511 Empty Panels 1RU, 2x24 Captive Screw Panel, empty AV-C224E1-Z 2RU, 2x24 Captive Screw Panel, empty AV-C224E2-Z Standard Size Video Patchcords 1’ 300mm 1.5’ 450mm 2’ 600mm

VPC-1-BLACK VPC-1.5-BLACK VPC-2-BLACK

VPC-1-RED VPC-1.5-RED VPC-2-RED

VPC-1-GREEN VPC-1.5-GREEN VPC-2-GREEN

VPC-1-BLUE VPC-1.5-BLUE VPC-2-BLUE

VPC-1-YELLOW VPC-1.5-YELLOW VPC-2-YELLOW

VPC-1-PURPLE VPC-1.5-PURPLE VPC-2-PURPLE

*more patchcords available on page 54

www.jackfields.com

Patent information: see inside back cover.

Video Designation Layouts

Viewable Size 0.485” [12.32mm]

3.470” [88.14mm] 3.000” [76.20mm]

19.000” [482.60mm] 17.000” [431.80mm]

2.050” [52.07mm] 1.250” [31.75mm] 0.6.25” [15.88mm] 0.700” [17.78mm] 2RU

Paper and Clear Window Size: 17.00” [431.80mm] x 0.568” [14.43mm]

RGB

1.000” [25.40mm] 32 Position AV-D232E2 Series 0.500” [12.70mm] 34 Position AV-D234E2 Series

3x32 Midsize Designation Layout

3.470” [88.14mm]

Viewable Size 0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.50mm] x 0.634” [16.10mm]

0.340” [86.36mm] 0.760” [19.30mm]

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.356” [9.04mm]

19.000” [482.60mm] 17.500” [444.50mm]

RGB Designation Layout

Paper and Clear Window Size: 17.500” [444.5mm] x 0.400” [10.16mm]

Microsize Video Designation Layouts

1 RU

0.340” [86.36mm] 0.760” [19.30mm]

Paper and Clear Window Size: 17.500” [444.5mm] x 0.810” [20.57mm]

1.5 RU

2.125” [53.98mm] 2.600” [66.04mm]

0.375” [9.53mm]

Viewable Size 0.731” [18.57mm]

1.375” [34.93mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.340” [86.36mm] 0.760” [19.30mm]

Top & Bottom Paper and Clear Window Size: 17.500” [444.5mm] x 0.225” [5.72mm] Middle Paper and Clear Window Size: 17.500” [444.5mm] x 0.362” [9.20mm]

1.5 RU

2.125” [53.98mm] 2.600” [66.04mm]

1.375” [34.93mm]

0.375” [9.53mm]

Viewable Size 0.180” [4.57mm] 0.317” [8.05mm]

19.000” [482.60mm] 17.500” [444.50mm]

Viewable Size 0.921” [23.40mm]

0.340” [86.36mm] 0.760” [19.30mm]

3.470” [88.14mm] 3.0” [76.20mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 1.000” [25.40mm]

2 RU www.jackfields.com

Patent information: see inside back cover.

Video Designation Layouts

1.000” [25.40mm] 32 Position AV-D232E1 Series 0.500” [12.70mm] 34 Position AV-D234E1 Series

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.290” [7.37mm]

19.000” [482.60mm] 17.500” [444.50mm]

Midsize Video Designation Layouts

Paper and Clear Window Size: 17.500” [444.5mm] x 0.328” [8.33mm]

1 RU

1.000” [25.40mm] 32 Position AV-D232E15 Series 0.500” [12.70mm] 34 Position AV-D234E15 Series

1.5 RU

Paper and Clear Window Size: 17.500” [444.5mm] x 0.634” [16.10mm]

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size 0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

1.000” [25.40mm] 32 Position AV-D232E2 Series 0.500” [12.70mm] 34 Position AV-D234E2 Series

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size

0.214” [5.44mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AV-C224E1 Series 0.938” [23.83mm] 26 Position AV-C226E1 Series 0.313” [7.95mm] 28 Position AV-C228E1 Series

Paper and Clear Window Size: 17.50” [444.5mm] x 0.264” [6.71mm]

Standard Size Video Designation Layouts

1 RU

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AV-C224E15 Series 0.938” [23.83mm] 26 Position AV-C226E15 Series 0.313” [7.95mm] 28 Position AV-C228E15 Series

1.5 RU

Paper and Clear Window Size: 17.50” [444.5mm] x 0.568” [14.43mm]

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size 0.508” [12.90mm]

19.000” [482.60mm] 17.500” [444.50mm]

1.563” [39.70mm] 24 Position AV-C224E2 Series 0.938” [23.83mm] 26 Position AV-C226E2 Series 0.313” [7.95mm] 28 Position AV-C228E2 Series

3.470” [88.14mm] 3.000” [76.20mm]

Viewable Size

0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.625” [15.88mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU www.jackfields.com

Patent information: see inside back cover.

RPT Rapid Punch Terminal System

AVP Rapid Punch Terminal (RPT) System

1.265”, 32.13mm

0.125”, 3.17mm

Worldwide installations... Unsurpassed performance...

Features and Benefits

Bigger & Stronger Size plus AVP's rigid mounting technique means unparalleled wire retention, no terminal push-through and overall superior strength.

Performance Advantages

Extended Cable Range The larger diameter barrel allows termination of 20-28 gage wire, solid or stranded, and it properly terminates bulkier 110 Ohm Digital Audio Cable.

Multiple Wire Gages The RPT terminal is certified for termination of different wire gages, even on the same half of the terminal. The colored arrows show the four mechanically independent slots.

Longer Life The RPT terminal is certified for 300 punch cycles, using 22 to 26 gage wire, facilitating easy and durable re-configuration at any time.

Faster & Easier The wire gripper locates and retains the wire before the punch enabling quick termination with just one hand.

Lifetime Tip Replacement The AVP heavy-duty punch tip is guaranteed for life (and we’re still waiting for the first claim).

www.jackfields.com

Patent information: see inside back cover.

RPT Rapid Punch Terminal System

Common Sense Easy and unified integration because AVP panels have consistent colorcoding and sequential numbering across the entire product line!

A B

T R S S R T

Confidence Terminate wire with 1 punch. The AVP punch tip makes a clear sound indicating a solid, gas-tight termination. Serviceability Easily replace damaged terminals.

S R T

Installation Advantages

AP-B248S1 Series

T R S

T R S S R T

AP-B248S2 Series 1

AP-A224E1 Series 1

TN RN T R S

A B

TN RN TN RN T R S S R T

AP-A124E1 Series

AP-B248S2 Series with Normals Out

Side View

RPT Pivoting Cable Bar Accessibility is significantly improved with the pivoting cable bar, standard on all rack-mounted RPT product.

Saves Space 2x48 Bantam Normals Out in a 2 Rack Unit Full Enclosure!

AP-B248S2-L-NT-RPT

www.jackfields.com

Patent information: see inside back cover.

RPT Rapid Punch Terminal System

Standard Jackfield Styles All AVP audio jackfields are suitable for AES/EBU digital and analog audio patching.

Full Enclosure

… see page 41

Standard Depth: 15.75”, [400.05mm] Extra Deep Option (XL): 21.75”, [552.45mm] Shallow Depth Option (XS): 10.75”, [273.05mm]

Top View

19.00”/ 483mm

Shallow Depth (XS) Top View

7.00” 177.80mm

Top View

*Easy-Tie Pivoting Cable Bar

10.75” 273.05mm

Extra Deep (XL)

18.30”/ 464.82mm

Standard Depth

12.75” 323.85mm

15.75”/ 400.05mm

*Easy-Tie Pivoting Cable Bar

21.75”/ 552.45mm

*Easy-Tie Pivoting Cable Bar

19.00”/ 483mm

Standard umbilical length is 40”, [1m]

Umbilical

See ordering details for specifying custom lengths

8.50”/ 216mm

*Easy-Tie Pivoting Cable Bar

Top View

Rear Panel (Unwired)

19.00”/ 483mm

Tooling Punch Tool with Tip AT-RPT-PTK Removal Tool Kit AT-RPT-RTK Punch Tip AT-RPT-TIP

www.jackfields.com

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

A 2

RPT

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN FR HN HR NN NT NTS

Number of Jacks per Row 24 2x24 Jacks 26 2x26 Jacks Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Full Normals installed at jacks Normals Out, with Full Normals installed on the Punch Block Half Normals installed at jacks Normals Out, with Half Normals installed on the Punch Block No Normals Normals Out Sleeve Normals Out

Longframe Full Enclosure Ordering Information

Options, add to end of Model Number -XL -XS -BGHJ -SGVJ

Jackfield Depth, Extra Deep, 21.75”, 552.45mm Jackfield Depth, Shallow, 10.75”, 177.80mm Bussed Grounds at jacks, horizontal Strapped Grounds at each vertical jack pair

Designation Layouts... page 15

Popular Models Model

Description

AP-A224E2-L-NT-RPT AP-A224E2-L-FN-RPT AP-A224E2-L-HN-RPT AP-A224E1-L-FN-RPT AP-A224E1-L-HN-RPT

2RU, 2x24 Longframe Jacks, Normals Out, RPT Punch Block 2RU, 2x24 Longframe Jacks, Full Normals, RPT Punch Block 2RU, 2x24 Longframe Jacks, Half Normals, RPT Punch Block 1RU, 2x24 Longframe Jacks, Full Normals, RPT Punch Block 1RU, 2x24 Longframe Jacks, Half Normals, RPT Punch Block

Patchcords

Longframe Patchcords 2’, 600mm 3’, 900mm 4’, 1200mm

LPC-2-BLACK LPC-3-BLACK LPC-4-BLACK

LPC-2-RED LPC-3-RED LPC-4-RED

LPC-2-GREEN LPC-3-GREEN LPC-4-GREEN

LPC-2-YELLOW LPC-3-YELLOW LPC-4-YELLOW

…more patchcords available on page 54

110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

LPC-2-BLUE LPC-3-BLUE LPC-4-BLUE

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

A 2

RPT Normaling

Series A Mosaic T Mosaic (Black CIS)

FN FR HN HR NN NT NTS

Number of Jacks per Row 24 2x24 Jacks 26 2x26 Jacks Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Longframe Umbilical Ordering Information

Options, add to end of Model Number -Uxxx -BGHJ -SGVJ

Where xxx is the total umbilical length in inches Bussed Grounds at jacks, horizontal Strapped Grounds at each vertical jack pair

Designation Layouts... page 15

Popular Models Model

Description

AU-A224E2-L-NT-RPT AU-A224E2-L-FN-RPT AU-A224E2-L-HN-RPT

2RU, 2x24 Longframe, Normals Out, 40”(1m) Umbilical, RPT Punch Block 2RU, 2x24 Longframe, Full Normals, 40”(1m) Umbilical, RPT Punch Block 2RU, 2x24 Longframe, Half Normals, 40”(1m) Umbilical, RPT Punch Block

Patchcords

Longframe Patchcords 2’, 600mm LPC-2-BLACK 3’, 900mm LPC-3-BLACK 4’, 1200mm LPC-4-BLACK 110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

LPC-2-RED LPC-3-RED LPC-4-RED

LPC-2-BLUE LPC-2-YELLOW LPC-2-GREEN LPC-3-BLUE LPC-3-YELLOW LPC-3-GREEN LPC-4-BLUE LPC-4-YELLOW LPC-4-GREEN …more patchcords available on page 54

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.214” [5.44mm]

19.000” [482.60mm] 17.000” [431.80mm]

0.625” [15.88mm]

1.313” [33.35mm] 24 Position AP-A224E1 Series 0.688” [17.48mm] 26 Position AP-A226E1 Series

Paper and Clear Window Size: 17.00” [431.80mm] x 0.262” [6.71mm]

1 RU

Longframe Full Enclosure Designation Layouts

0.625” [15.88mm]

1.313” [33.35mm] 24 Position AP-A224E15 Series 0.688” [17.48mm] 26 Position AP-A226E15 Series

Paper and Clear Window Size: 17.00” [431.8mm] x 0.568” [14.42mm]

1.5 RU

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.508” [12.90mm]

19.000” [482.60mm] 17.000” [431.80mm]

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

0.625” [15.88mm]

1.125” [28.58mm] 24 Position AP-A224E2 Series .500” [12.70mm] 26 Position AP-A226E2 Series

2 RU

Paper and Clear Window Size: 16.624” [422.25mm] x 0.864” [21.95mm]

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.214” [5.44mm]

19.000” [482.60mm] 17.5000” [444.50mm]

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AU-A224E1 Series 0.938” [23.83mm] 26 Position AU-A226E1 Series

Paper and Clear Window Size: 17.50” [444.5mm] x 0.262” [6.71mm]

Longframe Umbilical Designation Layouts

1 RU

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AU-A224E15 Series 0.938” [23.83mm] 26 Position AU-A226E15 Series

Paper and Clear Window Size: 17.50” [431.8mm] x 0.568” [14.42mm]

1.5 RU

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.508” [12.90mm]

19.000” [482.60mm] 17.500” [431.80mm]

2 RU www.jackfields.com

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AU-A224E2 Series 0.938” [23.83mm] 26 Position AU-A226E2 Series

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

B 2

RPT

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN FR HN HR NN NT NTS

Jack Spacing S Stereo Spaced (most common) E Even Spaced

Full Normals installed at jacks Normals Out, with Full Normals installed on the Punch Block* Half Normals installed at jacks Normals Out, with Half Normals installed on the Punch Block* No Normals Normals Out* Sleeve Normals Out** *Not available in 1RU

Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Bantam Full Enclosure Ordering Information

**Not available in 1 & 1.5RU

Options, add to end of Model Number -XL -XS -BGHJ -SGVJ

Jackfield Depth, Extra Deep, 21.75”, 552mm Jackfield Depth, Shallow, 10.75”, 177.80mm Bussed Grounds at jacks, horizontal Strapped Grounds at each vertical jack pair

Designation Layouts... page 17 & 18 Popular Models Model

Description

AP-B248S2-L-NT-RPT AP-B248S1-L-FN-RPT AP-B248S1-L-HN-RPT

2RU, 2x48 Bantam Jacks, Normals Out, RPT Punch Block 1RU, 2x48 Bantam Jacks, Full Normals, RPT Punch Block 1RU, 2x48 Bantam Jacks, Half Normals, RPT Punch Block

Patchcords

Bantam Patchcords 2’, 600mm BPC-2-BLACK 3’, 900mm BPC-3-BLACK 4’, 1200mm BPC-4-BLACK 110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

BPC-2-RED BPC-3-RED BPC-4-RED

BPC-2-BLUE BPC-2-YELLOW BPC-2-GREEN BPC-3-BLUE BPC-3-YELLOW BPC-3-GREEN BPC-4-BLUE BPC-4-YELLOW BPC-4-GREEN …more patchcords available on page 54

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

B 2

RPT

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN FR HN HR NN NT NTS

Jack Spacing S Stereo Spaced (most common) E Even Spaced Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Bantam Umbilical Ordering Information

Options, add to end of Model Number -Uxxx -BGHJ -SGVJ

Where xxx is the total umbilical length in inches Bussed Grounds at jacks, horizontal Strapped Grounds at each vertical jack pair

Designation Layouts... page 17 & 18

Popular Models Model

Description

AU-B248S1-L-NT-RPT AU-B248S2-L-NT-RPT AU-B248S1-L-FN-RPT AU-B248S1-L-HN-RPT

1RU, 2x48 Bantam, Front Panel, Normals Out, 40”, 1m Umbilical, RPT Punch Block 2RU, 2x48 Bantam, Front Panel, Normals Out, 40”, 1m Umbilical, RPT Punch Block 1RU, 2x48 Bantam, Front Panel, Full Normals, 40”, 1m Umbilical, RPT Punch Block 1RU, 2x48 Bantam, Front Panel, Half Normals, 40”, 1m Umbilical, RPT Punch Block

Patchcords

Bantam Patchcords 2’, 600mm BPC-2-BLACK 3’, 900mm BPC-3-BLACK 4’, 1200mm BPC-4-BLACK 110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

BPC-2-RED BPC-3-RED BPC-4-RED

BPC-2-BLUE BPC-2-YELLOW BPC-2-GREEN BPC-3-BLUE BPC-3-YELLOW BPC-3-GREEN BPC-4-BLUE BPC-4-YELLOW BPC-4-GREEN …more patchcords available on page 54

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

0.370” [9.40mm] 0.312” [7.92mm] 0.501” [12.73mm]

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

1.740” [44.20mm]

Viewable Size 0.290” [7.37mm]

1.250” [31.75mm]

19.000” [482.60mm] 17.000” [431.80mm]

0.682” [17.32mm]

Paper and Clear Window Size: 17.00” [34.80mm] x 0.340” [8.64mm]

Bantam Full Enclosure Designation Layouts

1 RU Stereo Spaced

11 12

13 14

15 16

17 18

19 20

21 22

23 24

0.370” [9.40mm] 0.312” [7.92mm] 0.501” [12.73mm]

25 26

27 28

29 30

31 32

33 34

35 36

39 40

37 38

41 42

43 44

45 46

47 48

0.682” [17.32mm]

Paper and Clear Window Size: 17.00” [431.8mm] x 0.634” [16.10mm]

1.5 RU Stereo Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.000” [431.80mm]

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

0.370” [9.40mm] 0.312” [7.92mm] 0.313” [7.95mm]

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

0.682” [17.32mm]

Paper and Clear Window Size: 16.624” [422.25mm] x 0.864” [21.95mm]

2 RU Stereo Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 0.792” [20.12mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size

0.290” [7.37mm]

19.000” [482.60mm] 17.000” [431.80mm]

Paper and Clear Window Size: 17.00” [34.80mm] x 0.340” [8.64mm]

1 RU Even Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 0.792” [20.12mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Paper and Clear Window Size: 17.00” [431.8mm] x 0.634” [16.10mm]

1.5 RU Even Spaced

2.605” [66.17mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.000” [431.80mm]

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 0.604” [15.34mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size

0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

Paper and Clear Window Size: 16.624” [422.25mm] x 0.864” [21.95mm]

2 RU Even Spaced

www.jackfields.com

Patent information: see inside back cover.

Audio Rapid Punch Terminal Jackfields

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

1.740” [44.20mm]

Viewable Size 0.290” [7.37mm]

1.250” [31.75mm]

19.000” [482.60mm] 17.5000” [444.50mm]

0.682” [17.32mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.340” [8.64mm]

Bantam Umbilical Designation Layouts

1 RU Stereo Spaced

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

0.682” [17.32mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.634” [16.10mm]

1.5 RU Stereo Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

11 12

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.5000” [444.50mm]

47 48

0.682” [17.32mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU Stereo Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 1.042” [26.47mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.290” [7.37mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.340” [8.64mm]

1 RU Even Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 1.042” [26.47mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Paper and Clear Window Size: 17.50” [444.5mm] x 0.634” [16.10mm]

1.5 RU Even Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 1.042” [26.47mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU Even Spaced

www.jackfields.com

Patent information: see inside back cover.

Audio Rapid Punch Terminal Panels

Rapid Punch Terminal Panels Color-coded and numbered, front and rear!

Model RPT48

Rapid Punch Terminal Panels

3.50", 88.14mm panel 48 sets of tip, ring, sleeve Terminates one 2x24 patchbay Pivoting cable bar front & rear

Model RPT48N 3.50”, 88.14mm panel 48 sets of tip, ring, sleeve & normals Terminates one 2x24 patchbay with normals brought out Pivoting cable bar front & rear

Model RPT52 3.50”, 88.14mm panel 52 sets of tip, ring, sleeve Terminates one 2x26 patchbay Pivoting cable bar front & rear

Model RPT52N 3.50”, 88.14mm panel 52 sets of tip, ring, sleeve & normals Terminates one 2x26 patchbay with normals brought out Pivoting cable bar front & rear

Model RPT96 3.50”, 88.14mm panel 96 sets of tip, ring, sleeve Terminates one 2x48 bantam patchbay Pivoting cable bar front & rear

Model RPT96N 3.50”, 88.14mm panel 96 sets of tip, ring, sleeve & normals Terminates one 2x48 bantam patchbay with normals brought out Pivoting cable bar front & rear

www.jackfields.com

Patent information: see inside back cover.

Audio RPT Wall-Mount Punch Block

RPT Wall-Mount Punch Block

Features and Benefits

& Integrated Cable Management Systems Frames designed to stack on wall, links provided for shield bussing from block to block • Terminates 2 x 24 (T, R, S) circuits • Terminates 20-28 gage solid or stranded, two wires per terminal, even 1 gage apart • Oversize split cylinder, certified gas tight, heavy-duty rigid mounted terminal • AVP Punch System allows clean one-step wire insertion and trimming • Frames designed to stack on wall, links provided for shield bussing from block to block • Circuit designation strip and title block. Everything at a glance! • Color-coding and numbering makes circuit identification simple

For complete RPT specifications, see pages 9, 10 & 41

Punch Block

Full Cable Management Capabilities

with full cable management capabilities Model RPTW-x Stackable AVP

Run your incoming cabling along the sides

+ - S

7 8

12 13

8.20"/ 208mm

S -

12 13

7.50"/ 190mm

RPTW-D

Only 11.5"/ 292mm (or less) after fully installed

Up to 2.5"/ 65mm Cable Bundle

RPT Punch Terminals

www.jackfields.com

Model: RPTW-x Top Edge View

Designation Strip

Up to 2.5"/ 65mm Cable Bundle

2.68"/ 68mm

7.50"/ 190mm

Please see page 22 for Configuration Options & Order Information

Fanning Tie-wrap guide strip every four circuits

Patent information: see inside back cover.

Audio RPT Wall-Mount Punch Block

Punch Block

Cable Distribution Rings

with cable distribution rings Model RPTW-EXT-x

Stackable 8.20"/ 290mm

RPTW-EXT-D

Please see page 22 for Configuration Options & Order Information

21.240"/ 540mm

Model: RPTW-EXT-x

Heavy Duty Rings

Top Edge View

RPT Punch Terminals

Designation Strip

3.50â&#x20AC;?/ 89mm

21.240"/ 540mm

Fanning Tie-wrap guide strip every four circuits

Punch Block

EDAC/ELCO Interface

with EDAC/ELCO interface Model RPTW-90EL

Model: RPTW-90EL Top Edge View (Front view at top of page)

RPTW-90EL

www.jackfields.com

Patent information: see inside back cover.

Audio RPT Wall-Mount Punch Block

Four configurations to choose from Four Configurations

Type A

Type B

Type C

Type D

Ordering Information Ordering Information

Popular Models Model

Description

RPTW-x & RPTW-EXT-x Series

x is replaced by A, B, C or D

Type A

RPTW-A RPTW-EXT-A

Punch Block with full cable management capabilities Punch Block with cable distribution rings

Type B

RPTW-B RPTW-EXT-B

Punch Block with full cable management capabilities Punch Block with cable distribution rings

Type C

RPTW-C RPTW-EXT-C

Punch Block with full cable management capabilities Punch Block with cable distribution rings

Type D

RPTW-D RPTW-EXT-D

Punch Block with full cable management capabilities Punch Block with cable distribution rings

Connectorized

RPTW-90EL

Punch Block with EDAC/ELCO interface

Accessories

B750 L750 R750 AT-RPT-PTK AT-RPT-TIP

Binding Post Shorting Link Cable Ring Punch Tool with Tip Punch Tip

www.jackfields.com

Patent information: see inside back cover.

Audio Morph the AVP

the AVP

1 RU

1.5 RU

• Advanced Audio Jackfield Concept • Next Generation Flexibility • AES/EBU Digital and Analog Audio Application

2 RU

Bantam Half Normals

Full Normals

Full Normals Switching Grounds

No Normals

Half Normals Switching Grounds

Longframe Half Normals

Full Normals

Full Normals Switching Grounds

No Normals

Half Normals Switching Grounds

2RU Jackfield Frame

Application: AES/EBU, Analog

Captive Screw

• Morph modules can be effortlessly identified, mixed and changed. Entire racks of jackfields can be re-configured anytime • EDAC/ELCO 3 pin interface • Modules are front mounted, providing a simple module interchange method • Maximized designations … see page 41

Features and Benefits

The award-winning Morph Audio System excels in specialty application requirements as found in mobile units and harsh environments. Its EDAC 3-pin terminations can withstand a 50 gravity vibration with no loss of continuity. In addition, the Morph System’s short depth and light weight, allows installation in the tightest spaces. www.jackfields.com

Patent information: see inside back cover.

Audio Morph the AVP

Keep an inventory of Morph Modules and empty Morph frames to allow custom jackfield assembly or re-configuration in minutes! Morph modules fit 1, 1.5 & 2 Rack Unit frames.

Top View 5.25”/ 135mm

10.00”/ 255mm

*Easy-Tie Pivoting Cable Bar

Gold Plated Contact Terminals

19.00”/ 483mm

Mating Connector Kit Included

Assembly Drawing

Assembly Drawing Module slides in and out of the rear of the panel.

Maximized Designations Circuit Indicator Full Normals Half Normals No Normals

Captive Jack Screws are locked in the panel • easy 'front-of-the-rack' assembly and re-arrangement • no more frantic searches for dropped screws. Screw holes are hidden by paper insert and clear window • Use the same 2.5mm hex wrench as used with AVP video panels

Each Morph Jackfield is shipped complete with its crimp-pin mating connector kit and a captive hex driver.

… see page 41

EDAC Hand Crimp Tool AVP Model AT-EHCT

Mating Connector Kit

(See ordering information for more details)

EDAC Insertion Tool AVP Model AT-EIT

EDAC Ejection Tool AVP Model AT-EET

www.jackfields.com

Tooling Ordering Information (over)

Patent information: see inside back cover.

Audio Morph the AVP

A 2

E03

Series

Installed Module Type

A Mosaic T Mosaic (Black CIS)

FN HN NN FNSG HNSG

Number of Dual Modules 24 24 Modules 26 26 Modules

Full Normals Half Normals No Normals Full Normals Switching Grounds Half Normal Switching Grounds

Longframe Ordering Information

Options, add to end of Model Number Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

-KZ No Mating Connector Kit Solder Mating Connector Kit -KS -SGVM Strapped grounds at each vertical jack pair

Designation Layouts... page 28

Popular Models and Components Model Description Complete Jackfields AM-A224E1-L-FN-E03 AM-A224E1-L-HN-E03 AM-A224E1-L-NN-E03

1RU, 2x24 Frame with 24 Dual Full Normal Modules (AM-A-FN-E03) installed, Mating Connector Kit 1RU, 2x24 Frame with 24 Dual Half Normal Modules (AM-A-HN-E03) iInstalled, Mating Connector Kit 1RU, 2x24 Frame with 24 Dual No Normal Modules (AM-A-NN-E03) installed, Mating Connector Kit

Individual Components AM-A-FN-E03 AM-A-HN-E03 AM-A-NN-E03 AM-A224E1-Z MK224P-E03C MK226P-E03C MK224P-E03S MK226P-E03S

Dual Longframe Module, Full Normals, EDAC 3 pin termination Dual Longframe Module, Half Normals, EDAC 3 pin termination Dual Longframe Module, No Normals, EDAC 3 pin termination 1RU, 2x24 Frame, empty EDAC 3Pin Primaries Kit for 2x24 Patchbay, Crimp EDAC 3Pin Primaries Kit for 2x26 Patchbay, Crimp EDAC 3Pin Primaries Kit for 2x24 Patchbay, Solder EDAC 3Pin Primaries Kit for 2x26 Patchbay, Solder

Longframe Patchcords 1’ 300mm LPC-1-BLACK 1.5’ 450mm LPC-1.5-BLACK 2’ 600mm LPC-2-BLACK 3’ 900mm LPC-3-BLACK 4’ 1200mm LPC-4-BLACK 6’ 1800mm LPC-6-BLACK 10’ 3.05m LPC-10-BLACK 110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

LPC-1-RED LPC-1.5-RED LPC-2-RED LPC-3-RED LPC-4-RED LPC-6-RED LPC-10-RED

LPC-1-GREEN LPC-1-BLUE LPC-1-YELLOW LPC-1.5-GREEN LPC-1.5-BLUE LPC-1.5-YELLOW LPC-2-GREEN LPC-2-BLUE LPC-2-YELLOW LPC-3-GREEN LPC-3-BLUE LPC-3-YELLOW LPC-4-GREEN LPC-4-BLUE LPC-4-YELLOW LPC-6-GREEN LPC-6-BLUE LPC-6-YELLOW LPC-10-GREEN LPC-10-BLUE LPC-10-YELLOW ... more patchcords available on page 54

Longframe Audio Patchcords

Patent information: see inside back cover.

Audio Morph the AVP

B 2

E03

Series

Installed Module Type

A Mosaic T Mosaic (Black CIS)

FN HN NN FNSG HNSG

Module Spacing S Stereo Spaced (most common) E Even Spaced

Full Normals Half Normals No Normals Full Normals Switching Grounds Half Normals Switching Grounds

Bantam Ordering Information

Options, add to end of Model Number Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

-KZ No Mating Connector Kit Solder Mating Connector Kit -KS -SGVM Strapped grounds at each vertical jack pair

Designation Layouts... page 28

Popular Models and Components Model Description

Complete Jackfields AM-B248S1-L-FN-E03 AM-B248S1-L-HN-E03 AM-B248S1-L-NN-E03

1RU, 2x48 Frame with 48 Dual Full Normal Modules (AM-B-FN-E03) installed, Mating Connector Kit 1RU, 2x48 Frame with 48 Dual Half Normal Modules (AM-B-HN-E03) installed, Mating Connector Kit 1RU, 2x48 Frame with 48 Dual No Normal Modules (AM-B-NN-E03) installed, Mating Connector Kit

Individual Components AM-B-FN-E03 AM-B-HN-E03 AM-B-NN-E03 AM-B248S1-Z MK248P-E03C MK248P-E03S

Dual Bantam Module, Full Normals, EDAC 3 pin termination Dual Bantam Module, Half Normals, EDAC 3 pin termination Dual Bantam Module, No Normals, EDAC 3 pin termination 1RU, 2x48 Frame, empty EDAC 3Pin Primaries Kit for 2x48 Patchbay, Crimp EDAC 3Pin Primaries Kit for 2x48 Patchbay, Solder

Bantam Patchcords 1’ 300mm BPC-1-BLACK 1.5’ 450mm BPC-1.5-BLACK 2’ 600mm BPC-2-BLACK 3’ 900mm BPC-3-BLACK 4’ 1200mm BPC-4-BLACK 6’ 1800mm BPC-6-BLACK 10’ 3.05m BPC-10-BLACK 110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

BPC-1-RED BPC-1.5-RED BPC-2-RED BPC-3-RED BPC-4-RED BPC-6-RED BPC-10-RED

BPC-1-GREEN BPC-1.5-GREEN BPC-2-GREEN BPC-3-GREEN BPC-4-GREEN BPC-6-GREEN BPC-10-GREEN

BPC-1-BLUE BPC-1.5-BLUE BPC-2-BLUE BPC-3-BLUE BPC-4-BLUE BPC-6-BLUE BPC-10-BLUE

BPC-1-YELLOW BPC-1.5-YELLOW BPC-2-YELLOW BPC-3-YELLOW BPC-4-YELLOW BPC-6-YELLOW BPC-10-YELLOW

Bantam Audio Patchcords

…more patchcords available on page 54

Patent information: see inside back cover.

Audio Morph the AVP

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

1.740” [44.20mm]

1.250” [31.75mm]

0.290” [7.37mm]

Viewable Size

19.000” [482.60mm] 17.500” [444.50mm]

0.682” [17.32mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.340” [8.64mm]

1 RU Stereo Spaced

Bantam Designation Layouts

11 12

13 14

15 16

17 18

19 20

21 22

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

23 24

25 26

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

0.682” [17.32mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.634” [16.10mm]

1.5 RU Stereo Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

11 12

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size

0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

47 48

0.682” [17.32mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU Stereo Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.340” [8.64mm] 0.760” [19.30mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.290” [7.37mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.340” [8.64mm]

1 RU Even Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.340” [8.64mm] 0.760” [19.30mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Paper and Clear Window Size: 17.50” [444.5mm] x 0.634” [16.10mm]

1.5 RU Even Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.340” [8.64mm] 0.760” [19.30mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU Even Spaced www.jackfields.com

Patent information: see inside back cover.

Audio Morph the AVP

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size

0.214” [5.44mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AM-A224E1 Series 0.938” [23.83mm] 26 Position AM-A226E1 Series

Paper and Clear Window Size: 17.50” [444.5mm] x 0.264” [6.71mm]

1 RU

Longframe Designation Layouts

1.563” [39.70mm] 24 Position AM-A224E15 Series 0.938” [23.83mm] 26 Position AM-A226E15 Series

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.508” [12.90mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.625” [15.88mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.568” [14.43mm]

1.5 RU

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size

0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AM-A224E2 Series 0.938” [23.83mm] 26 Position AM-A226E2 Series

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU

Connectorized 90 Pin

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.214” [5.44mm]

19.000” [482.60mm] 17.000” [431.80mm]

0.625” [15.88mm] Paper and Clear Window Size: 17.00” [431.80mm] x 0.264” [6.71mm]

1.313” [33.35mm] 24 Position AP-A224E1 Series 0.688” [17.48mm] 26 Position AP-A226E1 Series

1 RU

Longframe Designation Layouts ...from page 33

0.625” [15.88mm]

1.313” [33.35mm] 24 Position AP-A224E15 Series 0.688” [17.48mm] 26 Position AP-A226E15 Series

Paper and Clear Window Size: 17.00” [431.8mm] x 0.568” [14.42mm]

1.5 RU

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.508” [12.90mm]

19.000” [482.60mm] 17.000” [431.80mm]

1.125” [28.58mm] 24 Position AP-A224E2 Series .500” [12.70mm] 26 Position AP-A226E2 Series

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

0.625” [15.88mm] Paper and Clear Window Size: 16.624” [422.25mm] x 0.864” [21.95mm]

2 RU

www.jackfields.com

Patent information: see inside back cover.

Audio/Video/Data Midsize Video, Bantam Audio & Data Combo

HD Audio/Video/Data Combo

• Cost effective • Order only the circuits you need … see page 41 • Easily expanded at a later date • Enclosure provides neat installation • Capacity: up to 16 Midsize video & up to 24 Bantam audio • Available in 1RU, 1.5RU & 2RU Application: • Video; HDTV, serial digital, analog Audio; AES/EBU digital & analog • Perfect for non-linear edit suites • With the RS422 module, panel functions as a passive edit suite router for video, audio and machine control combined into one jackfield Panel Features: • CIS (Circuit Identification system) allows color-coding of each circuit’s function, available in 10 colors • Video and audio jacks are front mounted, featuring captive screws, simplify system redesign and maintenance • Maximized designations • Heavy-duty pivoting cable bar • Jackfield shipped with crimp-pin mating connector kit and a captive hex driver

AVP Mosaic Panel Captive screws stay in the panel, not lost in the rack

www.jackfields.com

Video Features: • 16 SuperHD+ 3.0GHz - 3Gb/s Midsize video jack positions • Jacks meet SMPTE 424M-2006 specs • Life cycle rating of 30,000 • 4 different jack configurations available

Features and Benefits

Audio Features: • 24 Bantam audio jack positions with stereo spacing • AVP Morph Audio System • Modules available feature Full Normals, Half Normals, No Normals, Full & Half Normals with Switching Grounds and *RS422 Polarity Protected • Modules are terminated with EDAC/ELCO 3 pin interface • Life cycle rating of 30,000 RS422 Features: • rigid 4 layer, 2 board construction, eliminates cross-talk between adjacent channels • keyed jacks and patchcords prevent inadvertent cross-patching

Patent information: see inside back cover.

Audio/Video/Data Midsize Video, Bantam Audio & Data Combo

AVP Midsize 3.0GHz - 3Gb/s Dual Video Jacks

AVP-AMN75 Normaled, Terminating

AVP-AM75 Non-Normaled, Terminating

Video Jacks

AVP-AMN Normaled, Non-Terminating

AVP-AM Non-Normaled, Non-Terminating

Video jack specs... page 3

AVP Morph Bantam Audio Jack Modules

No Normals

Half Normals

Full Normals

Full Normals Switching Grounds

Half Normals Switching Grounds

Audio jack specs... page 41

AVP Datapatch/RS422 Modules

AVP Datacord, polarity protected Full Normals 1 Send/Receive circuit pair

Ordering Information Model Complete Jackfield AM-DBS2-L-AMN75/AM-B-FN-E03

AM-DBS15-L-AMN75/AM-B-FN-E03 AM-DBS1-L-AMN75/AM-B-FN-E03 Individual Components AM-DBS2-Z AM-DBS15-Z AM-DBS1-Z AMN75 AM75 AMN AM AM-B-FN-E03 AM-B-HN-E03 AM-B-NN-E03 AM-B-FNSG-E03 AM-B-HNSG-E03 AM-B-RS422N AM-B-RS422 DAT-2-RED DAT-3-RED

www.jackfields.com

Audio Jack Modules

No Normals 1 Send/Receive circuit pair

RS422 Modules Datacords

... more patchcords available on page 54

Ordering Information

Description

2RU, 2x16 3.0GHz - 3Gb/s AMN75 Normaled, Terminating Dual video jacks, 2x24 Dual Full Normal Morph audio Modules installed, mating connector kit 1.5RU, 2x16 3.0GHz - 3Gb/s AMN75 Normaled, Terminating Dual video jacks, 2x24 Dual Full Normal Morph audio Modules installed, mating connector kit 1RU, 2x16 3.0GHz - 3Gb/s AMN75 Normaled, Terminating Dual video jacks, 2x24 Dual Full Normal Morph audio Modules installed, mating connector kit 2RU, 2x16 Midsize & 2x24 Bantam frame with pivoting cable bar, empty 1.5RU, 2x16 Midsize & 2x24 Bantam frame with pivoting cable bar, empty 1RU, 2x16 Midsize & 2x24 Bantam frame with pivoting cable bar, empty Normaled, Terminating Dual Midsize video jack Non-Normaled,Terminating Dual Midsize video jack Normaled, Non-Terminating Dual Midsize video jack Non-Normaled, Non-Terminating Dual Midsize video jack Dual Bantam Module, Full Normals, EDAC 3 pin termination Dual Bantam Module, Half Normals, EDAC 3 pin termination Dual Bantam Module, No Normals, EDAC 3 pin termination Dual Bantam Module, Full Normals switching grounds, EDAC 3 pin termination Dual Bantam Module, Full Normals switching grounds, EDAC 3 pin termination 1 Send/Receive circuit pair, Full Normals installed at jacks, *Polarity Protected 1 Send/Receive circuit pair, No Normals, *Polarity Protected with AVP Datacord AVP Datacord, 2â&#x20AC;&#x2122; (600mm) Dual Bantam Polarity Protected patchcord AVP Datacord, 3â&#x20AC;&#x2122; (900mm) Dual Bantam Polarity Protected patchcord

Patent information: see inside back cover.

Audio/Video/Data Midsize Video, Bantam Audio & Data Combo Each Morph Jackfield is shipped complete with its crimp-pin mating connector kit and a captive hex driver.

Tools EDAC Ejection Tool AVP Model AT-EET

EDAC Hand Crimp Tool AVP Model AT-EHCT

EDAC Insertion Tool AVP Model AT-EIT

Polarity Protected

Top View

• Reduce the risk of equipment damage! • Keyed jacks and patchcords eliminate inadvertent cross-patches *The jacks and plugs of these modules are polarized for the user’s protection. However, use of patchcords other than the AVP Datacord, or any other pair transposition within the customer’s equipment will circumvent this polarity protection.

19.00”/ 483mm

19.000” [482.60mm] 17.500” [444.50mm]

1 RU

Viewable Size 0.574” [14.58mm]

11 12

13 14

1.5 RU

0.500” [12.70mm] 0.775” [19.68mm]

2 RU

21 22

23 24

0.775” [19.68mm]

11 12

0.370” [9.40mm] 0.312” [7.92mm]

19 20

0.682” [7.92mm] 0.312” [17.32mm]

13 14

15 16

17 18

19 20

21 22

23 24

0.682” [7.92mm] 0.312” [17.32mm]

0.775” [19.68mm]

Paper and Clear Window Size: 17.50” [444.50mm] x 0.634” [16.10mm]

17 18

0.636” [16.15mm]

19.000” [482.60mm] 17.500” [444.50mm]

8.911” [226.33mm]] 8.275” [210.18mm]

15 16

19.000” [482.60mm] 17.500” [444.50mm]

0.500” [12.70mm] 0.775” [19.68mm]

0.794” [20.17mm]

Paper and Clear Window Size: 17.500” [444.50mm] x 0.340” [8.63mm]

www.jackfields.com

0.370” [9.40mm] 0.312” [7.92mm]

0.500” [12.70mm] 0.775” [19.68mm]

8.911” [226.33mm] 8.275” [210.18mm]]

Viewable Size

1.740” [44.20mm]

1.250” [31.75mm]

Combo Panel Designation Layouts

2.125” [53.98mm] 2.600” [66.04mm]

1.375” [34.93mm]

0.636” [16.15mm]

0.375” [9.53mm]

Viewable Size 0.290” [7.37mm]

8.911” [226.33mm] 8.275” [210.18mm]

Polarity Protection

0.636” [16.15mm]

0.370” [9.40mm] 0.312” [7.92mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

11 12

13 14

15 16

17 18

19 20

21 22

23 24

3.470” [88.14mm] 3.0” [76.20mm]

10.00”/ 255mm

*Easy-Tie Pivoting Cable Bar

0.682” [7.92mm] 0.312” [17.32mm]

0.775” [19.68mm]

Patent information: see inside back cover.

Audio Connectorized 90 Pin

A 2

E90

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN HN NN

Full Normals installed at jacks Half Normals installed at jacks No Normals

Number of Jacks per Row 24 2x24 Jacks 26 2x26 Jacks

Options, add to end of Model Number -XS -XL -BGHJ -SGVJ -KZ -KS

Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Full Enclosure Longframe Ordering Information

Jackfield Depth, Extra Short, 7.00”, 177.8mm Jackfield Depth, Extra Deep, 16.00”, 406.4mm Bussed Grounds at jacks, horizontal Strapped Grounds at each vertical jack pair No Mating Connector Kit Solder Mating Connector Kit

Designation Layouts... page 29

Popular Models Model

Description

AP-A224E1-L-FN-E90 AP-A224E1-L-HN-E90 MK224P-E90C MK226P-E90C MK224N-E90C MK226N-E90C MK224P-E90S MK226P-E90S MK224N-E90S MK226N-E90S

1RU, 2x24 Longframe Jacks, Full Normals, EDAC 90 Pin Termination, Mating Connector Kit 1RU, 2x24 Longframe Jacks, Half Normals, EDAC 90 Pin Termination, Mating Connector Kit EDAC 90 pin Primaries Kit for 2x24 patchbay, Crimp EDAC 90 pin Primaries Kit for 2x26 patchbay, Crimp EDAC 90 pin Normals Kit for 2x24 patchbay, Crimp EDAC 90 pin Normals Kit for 2x26 patchbay, Crimp EDAC 90 pin Primaries Kit for 2x24 patchbay, Solder EDAC 90 pin Primaries Kit for 2x26 patchbay, Solder EDAC 90 pin Normals Kit for 2x24 patchbay, Solder EDAC 90 pin Normals Kit for 2x26 patchbay, Solder

Each Connectorized Jackfield is shipped complete with its crimp-pin Mating Connector Kit

Mating Connector Kit

EDAC Hand Crimp Tool AVP Model AT-EHCT

Tooling EDAC Insertion Tool AVP Model AT-EIT 90 Pin Metal Cover (not included in Mating Connector Kit)

AVP Model AP-MCE90

www.jackfields.com

EDAC Ejection Tool AVP Model AT-EET

patchcords available on page 54

Patent information: see inside back cover.

Audio Connectorized 90 Pin

… see page 41

Normaling Descriptions

All AVP audio jackfields are suitable for AES/EBU digital & analog audio patching

Top View

16”

12"

Extra Deep (XL)

Top View

7” Standard

Available Full Enclosure Depths

Extra Short (XS)

B 2 48

E90

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN HN NN

Full Normals installed at jacks Half Normals installed at jacks No Normals

Jack Spacing S Stereo Spaced (most common) E Even Spaced

Options, add to end of Model Number -XS -XL -BGHJ -SGVJ -KZ -KS

Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Full Enclosure Bantam Ordering Information

Designation Layouts... page 35 Popular Models Model

AP-B248S1-L-FN-E90 AP-B248S1-L-HN-E90 MK248P-E90C MK248N-E90C MK248P-E90S MK248N-E90S

Description

1RU, 2x48 Bantam Jacks, Full Normals, EDAC 90 pin termination, Mating Connector Kit 1RU, 2x48 Bantam Jacks, Half Normals, EDAC 90 pin termination, Mating Connector Kit EDAC 90 pin Primaries Kit for 2x48 patchbay, Crimp EDAC 90 pin Normals Kit for 2x48 patchbay, Crimp EDAC 90 pin Primaries Kit for 2x48 patchbay, Solder EDAC 90 pin Normals Kit for 2x48 patchbay, Solder *38 & 56 Pin available upon request

Bantam Patchcords 2’, 600mm BPC-2-BLACK 3’, 900mm BPC-3-BLACK 4’, 1200mm BPC-4-BLACK 110 Ohm AES/EBU Digital and Analog Audio Application

www.jackfields.com

BPC-2-RED BPC-3-RED BPC-4-RED

BPC-2-GREEN BPC-3-GREEN BPC-4-GREEN

BPC-2-BLUE BPC-2-YELLOW BPC-3-BLUE BPC-3-YELLOW BPC-4-BLUE BPC-4-YELLOW ...more patchcords available on page 54

Patent information: see inside back cover.

Audio Connectorized 90 Pin

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

0.370” [9.40mm] 0.312” [7.92mm] 0.501” [12.73mm]

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

1.740” [44.20mm]

Viewable Size 0.290” [7.37mm]

1.250” [31.75mm]

19.000” [482.60mm] 17.000” [431.80mm]

Bantam Designation Layouts

0.682” [17.32mm]

Paper and Clear Window Size: 17.00” [34.80mm] x 0.340” [8.64mm]

1 RU Stereo Spaced

11 12

13 14

15 16

17 18

19 20

21 22

0.370” [9.40mm] 0.312” [7.92mm] 0.501” [12.73mm]

23 24

25 26

27 28

29 30

31 32

33 34

35 36

39 40

37 38

41 42

43 44

45 46

47 48

0.682” [17.32mm]

Paper and Clear Window Size: 17.00” [431.8mm] x 0.634” [16.10mm]

1.5 RU Stereo Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.000” [431.80mm]

11 12

0.370” [9.40mm] 0.312” [7.92mm] 0.313” [7.92mm]

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

47 48

0.682” [17.32mm]

Paper and Clear Window Size: 16.624” [422.25mm] x 0.864” [21.95mm]

2 RU Stereo Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 0.792” [20.11mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size

0.290” [7.37mm]

19.000” [482.60mm] 17.000” [431.80mm]

Paper and Clear Window Size: 17.00” [34.80mm] x 0.340” [8.64mm]

1 RU Even Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 0.792” [20.11mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Paper and Clear Window Size: 17.00” [431.8mm] x 0.634” [16.10mm]

1.5 RU Even Spaced

2.605” [66.17mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.000” [431.80mm]

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 0.604” [15.34mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size

0.794” [20.17mm]

19.000” [482.60mm] 16.624” [422.25mm]

Paper and Clear Window Size: 16.624” [422.25mm] x 0.864” [21.95mm]

2 RU Even Spaced www.jackfields.com

Patent information: see inside back cover.

Audio Jack & Panel Assemblies Bantam & Longframe

Features and Benefits … see page 54

Longframe panels also accept AVP standard size video jacks

Panel Features

• Extensive Selection - Bantam, 2x48 - Longframe, 2x24, 2x26, 2x28 -1RU, 1.5RU or 2RU • Maximized Designations • Front-mounting Jacks • Captive Screws • Heavy Duty Construction • Cable bars secure all terminations (optional)

Audio Jack Features

AVP Longframe and Bantam Jacks • Certified for 30,000 mating cycles • Nickel-plated for corrosion resistance • Self-wiping gold contacts • Solder tail or wire-wrap (full specifications on page 41)

17.50” [444.50mm]

7.00”, [178mm]

Optional sturdy steel Cable Bar protects terminations

Top View 19.00” [482.60mm]

www.jackfields.com

Patent information: see inside back cover.

Audio Jack & Panel Assemblies Ordering Information

A 2

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN HN NN

Full Normal jumpers installed at jacks Half Normal jumpers installed at jacks No Normal jumpers installed at jacks

Number of Jacks per Row

Longframe Ordering Information

Installed Jack Type

24 2x24 Jacks 26 2x26 Jacks 28 2x28 Jacks

A1S Longframe Jacks with solder tails A1W Longframe Jacks with wire-wrap tails None (empty panel) Z

Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62’, 66mm 2 2 Rack Unit 3.50”, 89mm

Options, add to end of Model Number -BAR Heavy-duty Cable Bar, - not available on 1RU 2x28 panels

Designation Layouts... page 40

Popular Models Model

Description

Longframe Jackpanels AJ-A224E1-A1S AJ-A224E2-A1S

1RU, 2x24, 48 Longframe Jacks with solder tails 2RU, 2x24, 48 Longframe Jacks with solder tails

Longframe Jacks

AJ-A1S AJ-A2S-FN AJ-A2S-HN AJ-A1W AJ-A2W-FN AJ-A2W-HN

1 Longframe Jack, solder, front-mount 2 Longframe Jacks, solder, front-mount, Full Normal 2 Longframe Jacks, solder, front-mount, Half Normal 1 Longframe Jack, wire-wrap, front-mount 2 Longframe Jacks, wire-wrap, front-mount, Full Normal 2 Longframe Jacks, wire-wrap, front-mount, Half Normal

www.jackfields.com

LPC-1-RED LPC-1.5-RED LPC-2-RED LPC-3-RED LPC-4-RED LPC-6-RED LPC-10-RED

Longframe Audio Patchcords

Patent information: see inside back cover.

Audio Jack & Panel Assemblies Ordering Information

B 2

Series

Normaling

A Mosaic T Mosaic (Black CIS)

FN Full Normal jumpers installed at jacks HN Half Normal jumpers installed at jacks NN No Normal jumpers installed at jacks

Jack Spacing

Bantam Ordering Information

Installed Jack Type

S Stereo Spaced (most common) E Even Spaced

B1S Bantam Jacks with solder tails B1W Bantam Jacks with wire-wrap tails None (empty panel) Z

Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

Options, add to end of Model Number -BAR Heavy-duty Cable Bar

Designation Layouts... page 39

Popular Models Model Bantam Jackpanels AJ-B248S1-B1S AJ-B248S1-B1S-BAR

Description

1RU, 2x48, 96 Bantam Jacks 1RU, 2x48, 96 Bantam Jacks, Heavy-Duty Cable Bar

Bantam Jacks

AJ-B1S AJ-B2S-FN AJ-B2S-HN AJ-B1W AJ-B2W-FN AJ-B2W-HN

1 Bantam Jack, solder, front-mount 2 Bantam Jacks, solder, front-mount, Full Normal 2 Bantam Jacks, solder, front-mount, Half Normal 1 Bantam Jack, wire-wrap, front-mount 2 Bantam Jacks, wire-wrap, front-mount, Full Normal 2 Bantam Jacks, wire-wrap, front-mount, Half Normal

www.jackfields.com

BPC-1-RED BPC-1.5-RED BPC-2-RED BPC-3-RED BPC-4-RED BPC-6-RED BPC-10-RED

BPC-1-GREEN BPC-1.5-GREEN BPC-2-GREEN BPC-3-GREEN BPC-4-GREEN BPC-6-GREEN BPC-10-GREEN

BPC-1-BLUE BPC-1.5-BLUE BPC-2-BLUE BPC-3-BLUE BPC-4-BLUE BPC-6-BLUE BPC-10-BLUE

BPC-1-YELLOW BPC-1.5-YELLOW BPC-2-YELLOW BPC-3-YELLOW BPC-4-YELLOW BPC-6-YELLOW BPC-10-YELLOW

Bantam Audio Patchcords

…more patchcords available on page 54

Patent information: see inside back cover.

Audio Jack & Panel Assemblies Designation Specifications

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

1.740” [44.20mm]

Viewable Size 0.290” [7.37mm]

1.250” [31.75mm]

19.000” [482.60mm] 17.500” [444.50mm]

Bantam Designation Layouts

0.682” [17.32mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.340” [8.64mm]

1RU Stereo Spaced

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

29 30

31 32

33 34

35 36

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

37 38

39 40

41 42

43 44

45 46

47 48

0.682” [17.32mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.634” [16.10mm]

1.5 RU Stereo Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

11 12

13 14

15 16

17 18

19 20

21 22

23 24

25 26

27 28

0.370” [9.40mm] 0.312” [7.92mm] 0.751” [19.08mm]

29 30

31 32

33 34

35 36

37 38

39 40

41 42

43 44

45 46

47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.682” [17.32mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU Stereo Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 1.042” [26.47mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.290” [7.37mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.340” [8.64mm]

1 RU Even Spaced

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 1.042” [26.47mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Paper and Clear Window Size: 17.50” [444.5mm] x 0.634” [16.10mm]

1.5 RU Even Spaced

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.574” [14.58mm]

19.000” [482.60mm] 17.500” [444.50mm]

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

0.328” [8.33mm] 1.042” [26.47mm]

33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU Even Spaced

www.jackfields.com

Patent information: see inside back cover.

Audio Jack & Panel Assemblies Designation Specifications

1.740” [44.20mm]

1.250” [31.75mm]

Viewable Size 0.214” [5.44mm]

19.000” [482.60mm] 17.500” [444.50mm]

Longframe Designation Layouts

0.625” [15.88mm]

1.563” [39.70mm] 24 Position AJ-A224E1 Series 0.938” [23.83mm] 26 Position AJ-A226E1 Series 0.313” [7.95mm] 28 Position AJ-A228E1 Series

Paper and Clear Window Size: 17.50” [444.5mm] x 0.264” [6.71mm]

1 RU

1.563” [39.70mm] 24 Position AJ-A224E15 Series 0.938” [23.83mm] 26 Position AJ-A226E15 Series 0.313” [7.95mm] 28 Position AJ-A228E15 Series

1.5 RU

0.625” [15.88mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.568” [14.43mm]

2.600” [66.04mm] 2.125” [53.98mm] 1.375” [34.93mm] 0.375” [9.53mm]

Viewable Size

0.508” [12.90mm]

19.000” [482.60mm] 17.500” [444.50mm]

1.563” [39.70mm] 24 Position AJ-A224E2 Series 0.938” [23.83mm] 26 Position AJ-A226E2 Series 0.313” [7.95mm] 28 Position AJ-A228E2 Series

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.794” [20.17mm]

19.000” [482.60mm] 17.500” [444.50mm]

0.625” [15.88mm] Paper and Clear Window Size: 17.50” [444.5mm] x 0.864” [21.95mm]

2 RU

www.jackfields.com

Patent information: see inside back cover.

Specifications AVP Circuit Identification System

Mosaic jackfields are shipped with each jack normaling type identified by color, but interchangeable indicators are available in 10 colors so you can color-code your system according to your own system design. (easily identify critical circuits, source and destination, signal type, etc)

GREEN

BROWN

BLUE

RED

PURPLE

ORANGE

GRAY

YELLOW

WHITE

Full Normals

Half Normals

No Normals

• Bantam: 1 Indicator per circuit • Longframe & Video: 2 Indicators per circuit

Ordering Information

CIS Number of Color Indicators

Color

10 30 60 100

BLACK

GREEN

BROWN

BLUE

RED

PURPLE

ORANGE

GRAY

YELLOW

WHITE

Package of 10 Package of 30 Package of 60 Package of 100

Jackfields with this insignia feature the AVP Circuit Identification System (CIS)

- MULTI of each color

Additional information on inside front cover.

Specifications

Panel Specifications Material: • Arboron thermo-laminate layers • UL94 Flame Class / 94 VO • UL card# E96516(M) June 17, 1986 • Full specification available upon request.

Materials • Frame: Steel, nickel-plated • Bushing: Brass, nickel-plated • Springs: Nickel-plated, solder lugs • Ground Terminal: Nickel-plated, solder lugs • Gold switching contacts • Insulation: Phenolic spacers, rigid PVC tubing through stack • Screws: Steel, nickel-plated Electrical • Contact Resistance: Less than .020 Ohms • Contact Rating: .75 AMP @ 140 VDC • Working Voltage: 140 VDC • Insulation: 500 VAC for 1 minute • Working Temperature Range: -40C to +85C www.jackfields.com

RPT Specifications AVP Rapid Punch Terminal

0.125”, 3.17mm

Audio Jack Specifications Features and Benefits • Certified for 30,000 mating cycles • Nickel-plated for corrosion resistance • Made and assembled in the USA • Self-cleaning Gold Contacts • Steel jack frame for superior jack life • Offset ground terminal for ease in making common ground buss connections • Solder lugs for Tip, Ring, Sleeve, Tip Normal, Ring Normal

1.265”, 32.13mm

BLACK

AVP Circuit Identification System

• Barrel Diameter: 0.125" • Material: Phosphor bronze, bright tin plate, special temper • Wire Gage Capacity: 20 thru 28, stranded or solid • Insulation Dia. Max: 0.086" • Number of Wires per Terminal: 1 or 2 wires per side. For 2 wires, gage of wire can be mixed providing they are 1 gage apart. (i.e. 20 & 22, 24 & 26) • Re-Usability: Minimum 300 terminations 22-26 awg, larger gages reduce terminal life • Bare Wires: Must be sleeved with PVC tubing before termination • Current Rating: 5 amperes / 22 AWG wire • Test Specifications comply with MIL-STD-202, MIL-STD-1344 & EIA RS-364

Patent information: see inside back cover.

Datapatch RS422

Datapatch/RS422

Application • Computer Data Interconnection • RS422 Patching • Universal Machine Control • Editor to VTR Patching

JR-16N

Application & Features

JR-32N

Features

• Patch between any two data paths with reliable audio-type patchcord • Easy interconnection of data ports (9-pin D connectors with screwlocks) • Enclosed steel chassis (19”, 480mm rack-mount x 12”, 300mm deep)

JR-48N

Polarity Protected

• Reduce the risk of equipment damage! • Keyed jacks and patchcords eliminate inadvertent cross-patches

Polarity Protected

The jacks and plugs of this jackfield are polarized for the user’s protection. However, use of patchcords other than the AVP Datacord, or any other pair transposition within the customer’s equipment will circumvent this polarity protection.

• Datapatch Polarity Protected Bantam Patchcords: 2’, [600mm] and 3’, [900mm]. Please see page 54.

www.jackfields.com

Patent information: see inside back cover.

Datapatch RS422

Datapatch Schematic Full Normals

Note 1. Grounds are bussed unless requested otherwise.

No Normals 1 GND 8 (TX-) 3 (TX+)

2 (REC-) 7 (REC+)

REC

1 GND 8 (TX-) 3 (TX+)

Note 2. The jacks and plugs of this jackfield are polarized for the user’s protection. However, use of patch cords other than the AVP Datacord or any other pair transposition within the customer’s equipment will circumvent this polarity protection.

2 (REC-) 7 (REC+)

REC

Upper Row

Upper Row Lower Row

Lower Row

1 GND 2 (REC-) 7 (REC+)

REC

8 (TX-) 3 (TX+)

1 GND 2 (REC-) 7 (REC+)

REC

8 (TX-) 3 (TX+)

Product Listing Model Datapatch / RS422 JR-16N JR-16 JR-32N JR-32 JR-48N JR-48

TX: Transmit REC: Receive

Ordering Information

Description

1RU 1.75”, 45mm Panel, 8 Send/Receive Circuit Pairs, Full Normals installed at jacks 1RU 1.75”, 45mm Panel, 16 Circuits, No Normals 2RU 3.50”, 89mm Panel, 16 Send/Receive Circuit Pairs, Full Normals installed at jacks 2RU 3.50”, 89mm Panel, 32 Circuits, No Normals 2RU 3.50”, 89mm Panel, 24 Send/Receive Circuit Pairs, Full Normals installed at jacks 2RU 3.50”, 89mm Panel, 48 Circuits, No Normals

0.742” [18.84mm] 0.312” [7.92mm] 0.439” [11.15mm]

1.730” [43.94mm]

1.250” [31.75mm]

19.000” [482.60mm] 17.000” [431.80mm]

Viewable Size 0.485” [12.32mm]

Datapatch Schematic

Designation Layouts

1.054” [26.77mm] Paper and Clear Window Size: 17.00” [431.80mm] x 0.568” [14.43mm]

1 RU

0.742” [18.84mm] 0.312” [7.92mm] 0.313” [7.94mm]

3.480” [88.39mm] 3.000” [76.20mm]

Viewable Size 0.722” [18.34mm] 0.890” [22.61mm]

19.000” [482.60mm] 16.624” [422.25mm]

1.046” [26.56mm] Paper and Clear Window Size: 16.624” [422.25mm] x 0.800” [20.32mm]

2 RU

www.jackfields.com

0.370” [9.39mm] 0.312” [7.92mm] 0.313” [7.94mm]

3.470” [88.14mm] 3.0” [76.20mm]

Viewable Size 0.722” [18.34mm] 0.890” [22.61mm] 1.300” [33.02mm] 2.170” [55.12mm]

19.000” [482.60mm] 16.624” [422.25mm]

0.682” [17.32mm] Paper and Clear Window Size: 16.624” [422.25mm] x 0.800” [20.32mm]

2 RU

Patent information: see inside back cover.

Insulated Bulkheads BNC & F Connector Panels

• Heavy-duty Rigid Phenolic Panels • Attractive textured black semi-gloss finish • Hi-Performance BNC-BNC and F-F Connectors • Configurations up to 3x24 available

Features

Side View 2 RU

BNC-BNC Non-Recessed

1 RU

Non-Recessed Connector Panels

• AVP Hi-Performance JJ300 BNC-BNC Connectors, for Analog to Digital Applications up to 3GHz

Semi-Recessed

Model WK-G216E2-JJ300

Side View 2 RU

BNC-BNC Semi-Recessed

1 RU

Semi-Recessed Connector Panels

• AVP Hi-Performance JJ300 BNC-BNC Connectors, for Analog to Digital Applications up to 3GHz

Side View 2 RU

F-F Connector

1 RU

F Connector Panels • AVP Hi-Performance HF310 F-F Connectors

www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads BNC & F Connector Panels

Panel Type

Installed Jacks

F G H

JJ300 JJ300 BNC-BNC Connectors HF310 HF310 F-F Connectors None ( Empty Panel ) Z

BNC, Non-recessed BNC, Semi-recessed F Connector

Number of Rows of Jacks 1 2 3

Ordering Information

Panel Height 1 1 Rack Unit 1.75”, 44mm 15 1.5 Rack Unit 2.62”, 66mm 2 2 Rack Unit 3.50”, 89mm

1 Row of Jacks 2 Rows of Jacks, 1.5 & 2 RU Panels Only 3 Rows of Jacks, 2 RU Panels Only

Number of Jacks per Row

Options, add to end of Model Number

16 16 Jacks per row 20 20 Jacks per row 24 24 Jacks per row*

-BAR Cable Bar

*Semi-recessed not available in 24 position

Popular Models (Configurations up to 3x24 are available ) Model Description

BNC-BNC Non-recessed Connector Panels WK-F116E1-JJ300 WK-F216E2-JJ300 WK-F320E2-JJ300 WK-F216E2-Z

1RU, 1x16 position, BNC-BNC non-recessed panel, 16 JJ300 connectors 2RU, 2x16 position, BNC-BNC non-recessed panel, 32 JJ300 connectors 2RU, 3x20 position, BNC-BNC non-recessed panel, 60 JJ300 connectors 2RU, 2x16 position, BNC-BNC non-recessed panel, empty

BNC-BNC Semi-recessed Connector Panels WK-G116E1-JJ300 WK-G216E2-JJ300 WK-G320E2-JJ300 WK-G216E2-Z

1RU, 1x16 position, BNC-BNC semi-recessed panel,16 JJ300 connectors 2RU, 2x16 position, BNC-BNC semi-recessed panel, 32 JJ300 connectors 2RU, 3x20 position, BNC-BNC semi-recessed panel, 60 JJ300 connectors 2RU, 2x16 position, BNC-BNC semi-recessed panel, empty

F-F Connector Panels WK-H116E1-HF310 WK-H216E2-HF310 WK-H324E2-HF310

1RU, 1x16 position, F connector panel, 16 HF310 connectors 2RU, 2x16 position, F connector panel, 32 HF310 connectors 2RU, 3x24 position, F connector panel, 72 HF310 connectors

Return Loss

High Performance F-81 Barrel Splice 360 Grade Brass, Bright Nickel Plated 1.026” (26.06mm) 0.44” (11.18mm) 0.147” (37.34) Polypropylene Beryllium Copper

(Typical)

F Connector Specifications

The two plots are based on testing from each side, since the unit is not symmetrical in length.

0 -5 -10

Good

Description: Body Material: Overall Length: Hex Size: Nut Width: Insulator Material: Center Pin Material:

Return Loss (dB)

HF310 Specifications

-20 -30 -40

-50 -60 -70 0

0.5

1.0

1.5

2.0

2.5

Frequency (GHz)

www.jackfields.com

75 ohm Double BNC Female Bulkhead Brass, Bright Nickel Plated 1.295” [32.90mm] 0.378” [9.60mm] 0.551” [14.00mm] Teflon, T-02015 Brass, Gold Plated

Return Loss

(Typical)

-5 -10

Good

Description: Body Material: Overall Length: Barrel Diameter: Nut Width: Dielectric: Center Pin:

Return Loss (dB)

JJ300 Specifications

-15 -20 -25

BNC Connector Specifications

-30 -35 -40

0.5

1.0

1.5

2.0

2.5

3.0

Frequency (GHz)

Patent information: see inside back cover.

Insulated Bulkheads XLR / TRI-LOC

XLR Bulkhead WK-N216E2-NX331

XLR Connector Panels

WK-N116E1-NY331

• Male and female may be mixed on the same panel • Tapped mounting holes • 6.0” [152.4mm] Strain relief tie bar is standard Product Listing Model

Description

XLR Panel with standard 6.0” [152.40mm] Cable Bar WK-N116E1-NX331 1RU, 1x16, XLR panel, 16 NX331 Female XLR WK-N216E2-NX331 2RU, 2x16, XLR panel, 32 NX331 Female XLR 1RU, 1x16, XLR panel, 16 NY331 Male XLR WK-N116E1-NY331 2RU, 2x16, XLR panel, 32 NY331 Male XLR WK-N216E2-NY331 1RU, 1x16, XLR panel, empty WK-N116E1-Z 2RU, 2x16, XLR panel, empty WK-N216E2-Z Add -3BAR to end of Model Nº 3.179” [80.75mm] Cable Bar instead of standard6.0” [152.40mm] Cable Bar

2 RU

Ordering Information

Optional -3BAR Cable Bar

Side View

3.179” [80.75mm]

6.00” [15.24]

1 RU

2RU

TRI-LOC Bulkhead

2RU

Side View 30° Angle

TRI-LOC Bulkhead Panels • Panels available for most popular TRI-LOC connectors • Standard or 30° angle WK-Q106E2-Z-30-BAR

Shown with optional Heavy-duty Cable Bar

Product Listing Model

Description

Tri-Loc Panels 2RU, 1x6, Tri-Loc panel for Kings front-mount F-type Tri-Loc connectors, empty WK-Q106E2-Z 2RU, 1x6, Tri-Loc panel for Kings front-mount F-type Tri-Loc connectors, empty, 30 degree angle WK-Q106E2-Z-30 2RU, 1x6, Tri-Loc panel for Kings rear-mount F-type Tri-Loc connectors, empty WK-R106E2-Z 2RU, 1x6, Tri-Loc panel for Kings rear-mount F-type Tri-Loc connectors, empty, 30 degree angle WK-R106E2-Z-30 Add -BAR to part number for optional Heavy-duty Cable Bar

Ordering Information

*Contact AVP for other Tri-Loc Panel Models. Panels with factory-installed connectors also available. www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads Universal Bulkhead System

Universal Bulkhead Panel System Universal Bulkhead System • Design your own bulkhead • Extensive selection of connector modules • 1RU, 2RU & 3RU, 16 & 12 position available • Strain relief cable bar is standard

Model WK-U216E2-Z with optional Connector Kits

Model WK-U116E1-Z 2RU version shown above

Model WK-U212E2-Z

2 RU

Side View Standard Cable Bar supplied with panel

Optional -3BAR Cable Bar

6.00” [152.40mm]

3.179” [80.75mm]

1 RU

Model WK-U112E1-Z

Universal Connector Kits... page 48

Ordering Information Model

Description

Universal Panel - Panel with 6.0” [152.40mm] Cable Bar Only; no Connectors, no Adaptor Plates, no Cover Plates WK-U216E3-Z 3RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U216E2-Z 2RU, 2x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U116E1-Z 1RU, 1x16 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E3-Z 3RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U212E2-Z 2RU, 2x12 Universal Panel, Panel & Cable Bar Only, No Connectors WK-U112E1-Z 1RU, 1x12 Universal Panel, Panel & Cable Bar Only, No Connectors Add -3BAR to end of Model Number 3.179” [80.75mm] Cable Bar instead of standard 6.0” [152.40mm] Cable Bar BUILD2 2 or 3RU Assembly of connectors to panel BUILD1 1 RU Assembly of connectors to panel

Ordering Information

Designation Layouts... page 49

www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads Universal Bulkhead System Ordering Information Model

Description

Connector Kits, kits include all components necessary to mount connector to panel

Audio

Universal Connector Kits

EDAC Receptacle, 3 pin crimp, adaptor plate(s), hardware EDAC Receptacle, 3 pin solder, adaptor plate(s), hardware MIDI Isolated Connector, solder type, hardware Speakon Connector, 2-Pole, solder termination, panel mount, hardware Speakon Connector, 4-Pole, solder termination, panel mount, hardware Speakon Connector, 4-Pole, black/gold contacts, solder, panel mount, h/w XLR, female, 3 pin, silver, solder termination, panel mount, hardware XLR, male, 3 pin, silver, solder termination, panel mount, hardware XLR female, 3 pin, black/gold contacts, solder, panel mount, hardware XLR male, 3 pin, black/gold contacts, solder, panel mount, hardware XLR female, 4 pin, black/gold contacts, solder, panel mount, hardware XLR male, 4 pin, black/gold contacts, solder, panel mount, hardware XLR female, 5 pin, black/gold contacts, solder, panel mount, hardware XLR male, 5 pin, black/gold contacts, solder, panel mount, hardware XLR female, 6 pin, black/gold contacts, solder, panel mount, hardware XLR female, 6 pin, silver, solder, Switchcraft equivalent, panel mount, hardware XLR male, 6 pin, black/gold contacts, solder, panel mount, hardware XLR female, 7 pin, black/gold contacts, solder, panel mount, hardware XLR male, 7 pin, black/gold contacts, solder, panel mount, hardware RCA Feedthru, red, adaptor plate(s), hardware RCA Feedthru, white, adaptor plate(s), hardware RCA Feedthru, yellow, adaptor plate(s), hardware Stereo Mini-Audio Jack 3.5mm, female, solder, adaptor plate(s), hardware 1/4â&#x20AC;? Stereo Phone Jack, solder termination, panel mount, hardware

UE3R-C UE3R-S UMIDI UNL2MP UNL4MP UNL4MP-B UNX331 UNY331 UNX330 UNY330 UNX430 UNY430 UNX530 UNY530 UNX630 UNY631-S UNY630 UNX730 UNY730 URCA-RD URCA-WH URCA-YL US35J USPJ

Universal Bulkhead System

Video UHF310 UHF310R UJJ300 UJJ300R UBNC50-F USMA USVHS-4G USVHS-4N

F Style Feedthru, AVP HF310, adaptor plate(s), hardware F Style Feedthru, recessed, AVP HF310, adaptor plate(s), hardware BNC Coaxial Feedthru, 3 GHz, AVP JJ300, adaptor plate(s), hardware BNC Coaxial Feedthru, 3 GHz, recessed, AVP JJ300, adaptor plate(s), h/w BNC Coaxial Feedthru, 50 Ohm, F-F, adapter plate(s), hardware SMA 50 Ohm Coaxial Connector, feed-thru, f-f, adaptor plate(s), hardware SVHS Feedthru, 4 pin, gold contacts, adaptor plate(s), hardware SVHS Feedthru, 4 pin, nickel contacts, adaptor plate(s), hardware

Data, Network UDB9-CF UDB9-CM UDB9-SF UDB9-SM UDB9-SCF UDB9-SCM UFW-4 UFW-6 UHD15-CF UHD15-CM UHDMI-DFF UMD66FF URJ11-F URJ11 URJ45-F URJ45-5E URJ45-6 URJ45-6A URJ45-6AS URJ45-6F USB-A USB-B USB-AB

DB9 Female, crimp contacts, adaptor plate(s), hardware DB9 Male, crimp pin contacts, adaptor plate(s), hardware DB9 Female, loose solder contacts, adaptor plate(s), hardware DB9 Male, loose solder pin contacts, adaptor plate(s), hardware DB9 Female, pre-loaded solder cup contacts, adaptor plate(s), hardware DB9 Male, pre-loaded solder cup pin contacts, adaptor plate(s), hardware FireWire, 4 pin, IEEE 1394, Feedthru, female-female, adaptor plate(s), hardware FireWire, 6 pin, IEEE 1394, Feedthru, female-female, chassis mount, hardware HD15/VGA 15 pin connector, female, crimp, adaptor plate(s), hardware HD15/VGA 15 pin connector, male, crimp, adaptor plate(s), hardware HDMI feedthru, female-female, chassis mount, hardware Mini Din Feedthru, 6 pin female-female, PS/2, keyboard, adaptor plate(s), hardware RJ11 6 pos/6 con, Feedthru, female-female, adaptor plate(s), hardware RJ11 6 pos/6 con, IDC interface, adaptor plate(s), hardware (tool-less termination) RJ45 CAT5E, Feedthru, female-female, adaptor plate(s), hardware RJ45 CAT5E, 110 interface, no door, adaptor plate(s), hardware (req. 110 punch tool) RJ45 CAT6, 110 interface, no door, adaptor plate(s), hardware (tool-less termination) RJ45 CAT6A, 110 interface, no door, adaptor plate(s), hardware (req. 110 punch tool) RJ45 CAT6A, EMI/RFI Shielding, die-cast housing, adaptor plate(s), h/w (tool-less term.) RJ45 CAT6, Feedthru, female-female, adaptor plate(s), hardware USB Type A Feedthru, female-female, adaptor plate(s), hardware USB Type B Feedthru, female-female, adaptor plate(s), hardware USB Type A front, Type B on rear, female-female, adaptor plate(s), hardware

Fiber Optic UFO-ST ULCD-T ULCD-MM USC-0 USC-1 UTOS

ST fiber optic coupler, feed-thru, female-female, adaptor plate(s), hardware LC Duplex Adaptor suitable for singlemode & multimode applications, adaptor plate(s), h/w LC Duplex Adaptor for Multimode applications, adaptor plate(s), hardware SC Multimode fiber optic connector, feed-thru, female-female, adaptor plate(s), hardware SC Singlemode/Multimode fiber optic connector, feed-thru, f-f, adaptor plate(s), hardware Toslink optical audio coupler, feed-thru, adaptor plate(s), hardware

Miscellaneous UCP UB2-M UB3-M UBP1-S UBP2-S UTNC-F UMTS-L

Blank Cover Plate, black, hardware, covers one position Banana Jacks, 2, red/black, solder, adaptor plate(s), hardware Banana Jacks, 3, red/black/green, solder, adaptor plate(s), hardware Binding Post, single, green, solder, will accept banana jacks, adaptor plate(s), h/w Binding Posts, double, red/black, solder, will accept banana jacks, adaptor plate(s), h/w TNC Coaxial Adapter, Feedthru, F-F, 50 Ohm, adaptor plate(s), hardware Miniature Toggle Switch, DPDT, Locking Handle, 3 Amps, 250VAC, Solder, adaptor plate(s), h/w

*Call if the connector you need is not shown above.

www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads Universal Bulkhead System

1.438” [36.51mm] 0.594” [15.08mm]

1.250” [31.75mm]

1.740” [44.20mm]

Viewable Size

0.374” [9.50mm]

19.000” [482.60mm] 17.000” [431.80mm]

Designation Layouts

Paper and Clear Window Size: 17.00” [431.80mm] x 0.413” [10.49mm]

1RU, 12 Position

3.470” [88.14mm] 3.000” [76.20mm]

0.374” [9.50mm]

Viewable Size

19.000” [482.60mm] 17.000” [431.80mm]

1.438” [36.51mm] 0.594” [15.08mm]

Paper and Clear Window Size: 17.00” [431.80mm] x 0.413” [10.49mm]

2RU, 12 Position

4.750” [120.65mm] 5.220” [132.59mm]

Viewable Size

0.374” [9.50mm]

19.000” [482.60mm] 17.000” [431.80mm]

1.438” [36.51mm] 0.594” [15.08mm]

Paper and Clear Window Size: 17.00” [431.80mm] x 0.413” [10.49mm]

3RU, 12 Position

1.063” [27.00mm] 0.528” [13.40mm]

1.250” [31.75mm]

1.740” [44.20mm]

Viewable Size

0.374” [9.50mm]

19.000” [482.60mm] 17.000” [431.80mm]

Paper and Clear Window Size: 17.00” [431.80mm] x 0.413” [10.49mm]

1RU, 16 Position

3.470” [88.14mm] 3.000” [76.20mm]

0.374” [9.50mm]

Viewable Size

19.000” [482.60mm] 17.000” [431.80mm]

1.063” [27.00mm] 0.528” [13.40mm]

Paper and Clear Window Size: 17.00” [431.80mm] x 0.413” [10.49mm]

2RU, 16 Position

4.750” [120.65mm] 5.220” [132.59mm]

Viewable Size

0.374” [9.50mm]

19.000” [482.60mm] 17.000” [431.80mm]

1.063” [27.00mm] 0.528” [13.40mm]

Paper and Clear Window Size: 17.00” [431.80mm] x 0.413” [10.49mm]

3RU, 16 Position www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads Modular Bulkhead

Modular Bulkhead Modular Bulkhead

30° Modular Bulkhead Features: • 2RU standard 19” NEMA EIA-310 rack spacing • All split mounting plates allow post-termination panel mounting • Adaptor plates available for: ADC®, Canare®, Kings® , Lemo® , Fischer®, Tajimi®, D&H®, DT-12 & more...

Standard Modular Bulkhead Standard Modular Bulkhead

*Adaptor plates shown with connectors for illustration www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads Modular Bulkhead

Switchboard Style Patch System Features:

Features

• 2RU standard 19” NEMA EIA-310 rack spacing • Split patchcord retainer mounting plates allow post-termination panel mounting • Eliminate costly patchcords ® ® • Universal Mounting Plate fits: ADC , Canare , ® ® ® ® ® Kings , Lemo , Fischer , Tajimi , D&H & more...

Switchboard Style Patch System

M3BSWB-R Universal switchboard style patchcord retainer mounting plate

MBCCH

Camera Cable Hanger support panel

WK-M3B106E2-Z 30 degree, 1x6, 2RU, Modular Bulkhead panel

WK-M3B106E2-Z-180 Recessed panel for switchboard style patchcord retainer system, 1x6, 2RU, Modular Bulkhead panel

*Adaptor plates shown with connectors for illustration

www.jackfields.com

Patent information: see inside back cover.

Insulated Bulkheads Modular Bulkhead

Ordering Information

Ordering Information Model Description Standard, 30° & Switchboard Style Modular Bulkhead 30 degree, 2RU, 1x6, Modular Bulkhead panel, empty WK-M3B106E2-Z Standard (non angled), 2RU, 1x6, Modular Bulkhead panel, empty WK-MSB106E2-Z Heavy-Duty Cable Bar HD-BAR-3 to model number for optional installed HD-BAR-3, Heavy-Duty Cable Bar Add -BAR WK-M3B106E2-Z-180 Recessed panel for switchboard style patchcord retainer system; 2RU, 1x6, Modular Bulkhead panel, empty Camera Cable Hanger support panel for the switchboard style patchcord retainer system MBCCH Mounting Plates MBCP MBADC MBCAN-SP MBCAN-FM4SP MBDT12-SP MBKIN-CSP MBKIN-FSP MBLEM-SP MBDSUB3-1 MBWIR-G2SP MBWIR-G3SP MBU2 M3BSWB-R

MBCL-m-c*

Cover Plate, blank, covers one unused position, hardware ADC TCP-B38, TCJ-B38 and ADC TCP-A12, TCJ-A12 ProAx Adaptor Plate, hardware Canare CCM5-PFRC and CCM7-PFRC Split Mounting Plate, hardware Canare CCF4-JKR and CCM4-PKR Split Mounting Plate, hardware DT12 Split Mounting Plate, hardware KINGS Type C TRI-LOC Split Mounting Plate, hardware KINGS Type F TRI-LOC Split Mounting Plate, hardware LEMO Split Mounting Plate, models FMW, FXW, EBW, EDW, PBW, hardware DB25 or HD44 D-Sub Adapter Mounting Plate, single hole, hardware Wireworks G2 Connector Split Mounting Plate, hardware Wireworks G3 Connector Split Mounting Plate, hardware Universal Mounting Plate, holds 2 AVP Universal Modules, hardware Universal Switchboard style patchcord retainer Mounting Plate, recessed type for LEMO, ADC, KINGS, Canare, Fischer, Tajimi, D&H & more, hardware Mounting Plate, adapts any cable mount connector including; LEMO, ADC, KINGS, Canare, Fischer, Tajimi, D&H & more, hardware *maximum connector diameter 1.25” [31.75mm], -m: manufacturer, -c: connector model number

Standard Modular Bulkhead

WK-MSB106E2-Z

Panel & Designation Dimensions

3.000” [76.20mm] 3.470” [88.14mm]

19.000” [482.60mm] 17.226” [437.54mm] 7.000” [177.80mm]

Side View Shown with optional HD-BAR-3 Heavy Duty Cable Bar

Paper & Clear Window Size: 17.226” [437.54mm] x 0.413” [10.49mm] 7.900” [200.66mm] 1.500” [38.10mm] m 80m

19.000” [482.60mm] 17.226” [437.54mm] 3.000” [76.20mm] 3.470” [88.14mm]

Front View

Side View Shown with optional HD-BAR-3 Heavy Duty Cable Bar

Paper & Clear Window Size: 17.226” [437.54mm] x 0.413” [10.49mm]

Switchboard Style Modular Bulkhead

]

7 7. ” [1 000

6.400” [162.56mm]

WK-M3B106E2-Z

30° Modular Bulkhead

2.250” [57.15mm]

WK-M3B106E2-Z-180 2.250” [57.15mm] 3.000” [76.20mm] 3.470” [88.14mm]

19.000” [482.60mm] 17.226” [437.54mm]

Front View

When im p the angle lementing d panels your sy into ste care is re m, design q extreme uired at the to of equip p and bottom ment ra ck.

Side View

Paper & Clear Window Size: 17.226” [437.54mm] x 0.413” [10.49mm]

Designations Viewable Size 0.374” [9.50mm]

www.jackfields.com

17.226” [437.54mm]

3.313” [84.15mm] 0.663” [16.84mm]

2.650” [67.31mm] Paper & Clear Window Size: 17.226” [437.54mm] x 0.413” [10.49mm]

Patent information: see inside back cover.

Hinged Rack Frame Hinged Access Bulkhead Frame

Hinged Access Bulkhead Frame Features: • standard 19” NEMA EIA-310 rack spacing • 305 stainless steel & black anodized T6061 aluminum for maximum corrosion resistance • supplied hardware is stainless steel, compression latches & clip nuts are RoHS compliant

HABF Features

Model HABF-12/10, with 10RU capacity Model HABF-10/8, with 8RU capacity Model HABF-8/6, with 6RU capacity Model HABF-6/4, with 4RU capacity

12RU, 10RU, 8RU, 6RU,

0.600” 1.475”

19.000”

21.000”

17.732”

12RU, Model HABF-12/10 with 10RU capacity

0.600” 1.475”

19.000”

8RU, Model HABF-8/6 0.600” 1.475”

14.000”

17.732”

HABF Series

19.000”

Dimensions

with 6RU capacity

HABF Series

17.732”

0.600” 1.475”

17.500”

19.000”

10RU, Model HABF-10/8

6RU, Model HABF-6/4 with 4RU capacity HABF Series

HABF Series

www.jackfields.com

10.500”

17.732”

with 8RU capacity

Patent information: see inside back cover.

Patchcords Audio / Video / Digital /Data

Video Patchcords

Patchcord Type

Color

K Microsize M Midsize V Standard Size

BLACK RED GREEN BLUE YELLOW PURPLE ORANGE WHITE

BNC Patchcords

Patchcord Length 1 1’ [300mm] 1.5 1.5’ [450mm] 2 2’ [600mm] 3 3’ [900mm] 4 4’ [1200mm] 6 6’ [1800mm] 10 10’ [3.05m]

Video Patchcords

example... MPC-2-RED

BNCPC

Patchcord Length 2 2’ [600mm] 3 3’ [900mm] 5 5’ [1.52m] 10 10’ [3.05m] 25 25’ [7.62m] 50 50’ [15.24m] 100 100’ [30.48m]

Opposite End Termination BN BNC termination K Microsize plug termination M Midsize plug termination V Standard Size plug termination

Color BLACK RED GREEN BLUE YELLOW PURPLE ORANGE WHITE

Audio Patchcords

BNC Patchcords

Patchcord Type

Color

B Bantam L Longframe

BLACK RED GREEN BLUE YELLOW PURPLE ORANGE WHITE

Patchcord Length 1 1’ [300mm] 1.5 1.5’ [450mm] 2 2’ [600mm] 3 3’ [900mm] 4 4’ [1200mm] 6 6’ [1800mm] 10 10’ [3.05m]

Audio Patchcords

For 110 Ohm AES/EBU Digital and Analog Audio Application

example... BPC-2-GREEN

Stereo Bantam Patchcords Polarized Datacords Patchcord Type SBPC Stereo Bantam DATPC Polarized Datapatch

Stereo Bantam Patchcords

RED

Stereo Bantam Patchcord Length 2 2’ [300mm] 3 3’ [450mm] ...see page 32 & 42

www.jackfields.com

Datapatch Polarized Datacords Patent information: see inside back cover.

Audio Audio Normaling

Full Normals

A B Physical: A: T, R, S, wired out to rear termination connector. TN, RN are strapped at the jacks to B: TN, RN respectively. B: T, R, S, wired out to rear termination connector. TN, RN are strapped at the jacks to A: TN, RN respectively. Function: Signal from A is automatically looped to B. If a patchcord is inserted in A or B, the automatic looping is broken. Features and Benefits: Automatic Looping.

Half Normals

No Normals

Normals Out

Normaling Descriptions T: Tip R: Ring S: Sleeve TN: Tip Normal RN: Ring Normal SN: Sleeve Normal

B Physical: A: T, R, S, wired out to rear termination connector. T, R are strapped at the jacks to B: TN, RN respectively. B: T, R, S, wired out to rear termination connector. TN, RN are strapped at the jacks to A: T, R respectively. Function: Signal from A is automatically looped to B. If a patchcord is inserted in A, the signal is still looped to B. However, if a patchcord is inserted in B, the automatic looping is broken. Features and Benefits: Automatic Looping, Signal Monitoring when A is patched.

Physical: A: T, R, S, wired out to rear termination connector. B: T, R, S, wired out to rear termination connector. Function: A circuits are completely independent from B circuits. U-Links or patchcords must be used. Features and Benefits: Simple patching.

Normals Half Normals Block HR Strapped at Punch Block FM FR Strapped atFullPunch

Full Normals with Monitor

B Physical: A: T, R, S, TN, RN wired out to rear termination connector. B: T, R, S, TN, RN wired out to rear termination connector. Function: No Normals, reconfigurable. Benefits: 1. Flexibility: Full or Half Normals can be strapped, per circuit, at the rear termination connector.

Strapping at the Punch Block

Half Normals Out 90 Pin Only HT Connectorized

M A

A B

Physical: A: T, R, S, TN, RN wired out to rear termination connector. B: T, R, S, TN, RN wired out to rear termination connector. Punch Block: Full Normals Function: Full Normals, reconfigurable. Benefits: 1. Saves time at installation. 2. Flexibility: Full or Half Normals can be strapped, per circuit, at the rear termination connector.

Physical: A: T, R, S, TN, RN wired out to rear termination connector B: T, R, S, TN, RN wired out to rear termination connector Punch Block: Half Normals Function: Half Normals, reconfigurable Benefits: 1. Saves time at installation. 2. Flexibility: Full or Half Normals can be strapped, per circuit, at the rear termination connector.

B Physical: A: T, R, S, wired out to rear termination connector. TN, RN are strapped to B: TN, RN respectively. In addition T, R are strapped to M: T, R respectively B: T, R, S, wired out to rear termination connector. TN, RN are strapped to A: TN, RN respectively. M: T, R are strapped to A: T, R respectively Function: Full Normals (A and B). M monitoring of A. Features and Benefits: Automatic Looping from A to B. Monitoring of A is always available in M.

Physical: A: T, R, S, wired out to rear 90 pin connector. T, R also wired out to rear 120 pin connector. B: T, R, S, wired out to rear 90 pin connector. TN, RN wired out to rear 120 pin connector. Function: No Normals, reconfigurable. Benefits: 1. Flexibility: Half Normals or No Normals can be configured, per circuit, at the rear 120 pin connector.

Sleeve Normals

Sleeve Half Normals Sleeve Normals Out Sleeve Half Normals Sleeve Normals at Jacks HNS Strapped at Jacks FRS Strapped at Punch Block HRS Strapped at Punch Block NTS Sleeve Normals Out FNS Strapped S

Physical: A: T, R, S, wired out to rear termination connector. TN, RN, SN are strapped at the jacks to B: TN, RN, SN respectively. B: T, R, S, wired out to rear termination connector. TN, RN, SN are strapped at the jacks to A: TN, RN, SN respectively. Function: Signal from A, (including Sleeve) is automatically looped to B. If a patchcord is inserted in A or B, the automatic looping is broken. Features and Benefits: 1. Automatic Looping of Tip, Ring & Sleeve. 2. Switching Grounds.

B Physical: A: T, R, S, wired out to rear termination connector. T, R, S are strapped at the jacks to B: TN, RN, SN respectively. B: T, R, S, wired out to rear termination connector. TN, RN, SN are strapped at the jacks to A: T, R, S respectively. Function: Signal from A, (including Sleeve) is automatically looped to B. If a patchcord is inserted in A, the signal is still looped to B. However, if a patchcord is inserted in B, the automatic looping is broken. Features and Benefits: 1. Automatic Looping of Tip, Ring & Sleeve. 2. Switching Grounds.

RN SN

SN RN

Physical: A: T, R, S, TN, RN, SN wired out to rear termination connector. B: T, R, S, TN, RN, SN wired out to rear termination connector. Punch Block: Full Normals Function: Full Normals, reconfigurable. Benefits: 1. Flexibility: Full or Half Normals can be strapped, per circuit, at the rear termination connector. 2. Switching Grounds.

RN TN

Physical: A: T, R, S, TN, RN, SN wired out to rear termination connector. B: T, R, S, TN, RN, SN wired out to rear termination connector. Punch Block: Half Normals Function: Half Normals, reconfigurable. Benefits: 1. Flexibility: Full or Half Normals can be strapped, per circuit, at the rear termination connector. 2. Switching Grounds.

Physical: A: T, R, S, TN, RN, SN wired out to rear termination connector. B: T, R, S, TN, RN, SN wired out to rear termination connector. Function: No Normals, reconfigurable. Benefits: 1. Flexibility: Full or Half Normals can be strapped, per circuit, at the rear termination connector. 2. Switching Grounds.

Patent information: see inside back cover.

Video Video Jack Normaling

Video Jack Normaling Series Fullsize, Midsize & Micro 3.0GHz - 3 Gb/s Dual Jacks & Single Jacks Normaled, Terminating

AVP-ASN7511 AVP-AMN75 AVP-KMN75 AVP-AS7511 AVP-AM75 AVP-KM75

Video Jack Normaling

Non-Normaled, Terminating

Normaled, Non-Terminating

AVP-ASN11 AVP-AMN AVP-KMN Non-Normaled, Non-Terminating

AVP-AS11 AVP-AM AVP-KM

AVP-AMSL75 AVP-AMSS75

Terminating, long

Terminating, short

AVP-AMSL AVP-AMSS

Non-Terminating, long

Non-Terminating, short

AS: AM: KM: N: 75: R: :

www.jackfields.com

3.0 GHz Standard Size 3.0 GHz Midsize 3.0 GHz Micro Size Normaled 75 ohm Terminated Rear Mount Video Patch Cord

Patent information: see inside back cover.

Index AMS25 2BNC Series 90 pin connectorized A AES/EBU AJ-A1S AJ-A1W AJ-A224E1 Series AJ-A224E2 Series AJ-A226E1 Series AJ-A226E2 Series AJ-A228E1 Series AJ-A228E2 Series AJ-A2S Series AJ-A2W Series AJ-B1S AJ-B1W AJ-B248S1 Series AJ-B248S2 Series AJ-B2S Series AJ-B2W Series AM-A224E1 Series AM-A224E2 Series AM-A224-SGVK AM-A226E1 Series AM-A226E2 Series AM-A-FN-E03 AM-A-HN-E03 AM-A-NN-E03 AM-B248S1 Series AM-B248S2 Series AM-B-FN-E03 AM-B-HN-E03 AM-B-NN-E03 AMN75, AMN, AM75, AM AP-A224E1 Series AP-A224E2 Series AP-A226E1 Series AP-A226E2 Series AP-B248S1 Series AP-B248S2 Series AP-LPE120 AP-MCE90 AS11 AS7511 ASN11 ASN7511 AT-EET AT-EHCT AT-EIT AT-RPT-PTK AT-RPT-RTK AT-RPT-TIP AU-A224E1 Series AU-A224E2 Series AU-A226E1 Series AU-A226E2 Series AU-B248S1 Series AU-B248S2 Series Audio Jack specifications Audio Normaling Audio/Video/Data Combo Panel AV-C224E1 Series AV-C224E2 Series AV-C226E1 Series AV-C226E2 Series AV-C228E1 Series AV-C228E2 Series AV-K248E1 Series AV-K248E15 Series AV-K448E15 Series AV-K248E2 Series AVP-AS11 AVP-AS7511 AVP-ASN11 AVP-ASN7511 B B750 Bantam Patchcords Bantam, RPT BNC BNC Patchcords

54 32, 33 24, 30 37 37 37 37 37 37 37 37 37 37 38 38 38 38 38 38 26 26 25 25 25 26 26 26 26 26 27 27 27 3 13, 34 13, 34 13, 34 13, 34 16, 33 16, 33 33, 34 34 3 3 3 3 25, 32,33 25,32, 33 25,32, 33 12 12 12 14 14 14 14 17 17 41 55 30-32 7 7 7 7 7 7 4 4 4 4 3 3 3 3 23 54 16-19 44-45 54

AVP Patents for Products in this Catalog

BPC Series 54 Bulkhead 44-53 Bulkhead, Modular 50-52 C Cable Bar 11, 12 Cable Bundle 14, 17 Circuit Identification System 41 41 CIS 6 Component Video 33-35 Connectorized 90 pin D 54 DAT-2-RED 54 DAT-3-RED Datapatch 31, 42, 43 Datapatch Patchcords 31, 54 Designation Layouts: RGB 2RU 8 3x32 Midsize Video 2RU 8 2x32 Midsize Video 1, 1.5, 2RU 8 2x48 Microsize Video 1, 1.5, 2RU 8 4x48 Microsize Video 1.5RU 9 2x34 Midsize Video 1, 1.5, 2RU 9 2x24 Standard Size Video 1, 1.5, 2RU 9 2x26 Standard Size Video 1, 1.5, 2RU 9 2x28 Standard Size Video 1, 1.5, 2RU 9 2x24 Longframe Audio RPT 1, 1.5, 2RU 15 2x26 Longframe Audio RPT 1, 1.5, 2RU 15 2x48 Bantam Audio Stereo-spaced RPT 1, 1.5, 2RU 18 2x48 Bantam Audio Even-spaced RPT 1, 1.5, 2RU 18 2x48 Bantam Audio Stereo-spaced RPT 1, 1.5, 2RU 19 2x48 Bantam Audio Even-spaced RPT 1, 1.5, 2RU 19 2x48 Bantam Audio Stereo-spaced Morph 1, 1.5, 2RU 28 2x48 Bantam Audio Even-spaced Morph 1, 1.5, 2RU 28 2x48 Bantam Audio Stereo-spaced Morph 1, 1.5, 2RU 28 2x48 Bantam Audio Even-spaced Morph 1, 1.5, 2RU 28 2x24 Longframe Audio Morph 1, 1.5, 2RU 29 2x26 Longframe Audio Morph 1, 1.5, 2RU 29 2x40 Audio/Video/Data Combo Panel 1, 1.5, 2RU 32 2x48 Bantam Audio Stereo-spaced 90Pin 1, 1.5, 2RU 35 2x48 Bantam Audio Even-spaced 90Pin 1, 1.5, 2RU 35 2x24 Longframe Audio 90Pin 1, 1.5, 2RU 29 2x26 Longframe Audio 90Pin 1, 1.5, 2RU 29 2x48 Bantam Audio Stereo-spaced Jackpanel 1, 1.5, 2RU 39 2x48 Bantam Audio Even-spaced Jackpanel 1, 1.5, 2RU 39 2x24 Longframe Audio Jackpanel 1, 1.5, 2RU 40 2x26 Longframe Audio Jackpanel 1, 1.5, 2RU 40 2x28 Longframe Audio Jackpanel 1, 1.5, 2RU 40 JR-16, JR-16N 1RU 43 JR-32, JR-32N 2RU 43 JR-48, JR-48N 2RU 43 1x12, 2x12 Universal 1, 2, 3RU 49 1x16, 2x16 Universal 1, 2, 3RU 49 1x6 Modular Bulkhead Standard, 30°, Switchboard 2RU 52 E EDAC 24-35 F F Connectors 44-45 FN Full Normals 55 FR Full Normals Strapped at Punch Block 55 FNS Sleeve Normals Strapped at Jacks 55 FRS Sleeve Normals Out Stapped at Punch Block 55 H HABF 53 HDTV 2-9, 30 HF310 44-46 Hinged Access Bulkhead Frame 53 HN Half Normals 55 HR Half Normals Stapped at Punch Block 55 HT Half Normals Out 90 Pin Only 55 HNS Sleeve Half Normals Strapped at Jacks 55 HRS Sleeve Half Normals Strapped at Punch Block 55 J Jacks, Video and Audio 3, 36, 41 JJ300 44-45 JR-16 42, 43 JR-16N 42, 43 JR-48 42, 43 JR-48N 42, 43 K 3, 56 KMN75, KM75, KMN, KM 4, 56 KPC Microsize Video Patchcord Series

L L750 Longframe Patchcords Longframe, RPT LPC Series M Modular Bulkhead Morph Audio System Mosaic Micro Video Jackfield, 3GHz - 3Gb/s Micro Video Jack Specifications Midsize Video, 3GHz - 3Gb/s Midsize Video Patchcords N NN No Normals Normaling NT Normals Out NTS Sleeve Normals Out NX331 NY331 P Patchcords Pivoting Cable Bar Punch Removal Tool Kit Punch Tip Punch Tool R R750 Rapid Punch Terminal Specifications Rapid Punch Terminal System RGB Jackfields RGB Patchcords RPT Bantam Jackfields RPT Longframe Jackfields RPT Specifications RPT System RPT Terminal Panels RPT Wall-mount Punch Block RPT48 RPT48N RPT52 RPT52N RPT96 RPT96N RPTW Series RS422 RS422 Patchcords S SBPC Series Stereo Bantam Patchcords SuperHD+ Video Switchboard Style Patch System T Tooling TRI-LOC U Umbilical Universal Panel System Universal Connector Kits V Video Jack Specifications Video Jackfields Video Jacks Video Jack Normaling Video Patchcords VJF-RGB-2 VP-24K-RGB-2 VPC Series VPC-RGB Series W Wall-mount Punch Block WK-F Series (BNC) WK-G Series (BNC Semi-recessed) WK-H Series (F connector HF310) WK-M Series (Modular Bulkhead WK-N Series (XLR) WK-Q Series (Tri-Loc Kings F-type) WK-R Series (Tri-Loc Kings F-type rear-mount) WK-U Series (Universal Panel System) X XLR

US Patent: 5,730,618; Rapid Punch Terminal (RPT) System, US Patent 6,540,562: Morph Module Audio System, US Patent: 6,280,238; Full-Face Jackfield Designation Plate In the interest of improved design and performance, AVP reserves the right to make changes in its specifications without prior notice. Copyright © 2004 AVP MFG & Supply Inc. www.jackfields.com

23 54 13-15 54 50-52 24-29 Inside Front Cover 4 3 2-6 54 55 55 55 55 46, 48 46, 48 54 11, 12, 20 11, 12 11, 12 11, 12 23 10 10, 38, 41 10, 38, 41 6 6 16-19 13-15 10-12, 41 10, 11 20 21-23 20 20 20 20 20 20 21-23 30-31, 42-43 30-31, 42-43 54 54 2-9 51, 52 12, 25, 32, 33 46 14-18 47-49 48 3 2-9 3 56 54 6 6 54 6 21-23 44-45 44-45 44-45 50-52 46 46 46 47-49 46