Installation Instruction Sheet
2.provided.Mountthe
The Lisbon parcel letterbox receives parcels and general mail. You will need to mount it in a location that is easily accessible to Australia Post and couriers. This will typically be at your front boundary.
LISBON PARCEL LETTERBOX
Installation
Parcels up to 12 x 17 x 22cm can be delivered via the parcel chute. The courier simply lifts the lid up, places the parcel inside and closes the lid. The parcel will fall into the retrieval area at the bottom. A specially designed internal flap stops anyone from reaching into the retrieval area when the lid is opened.
O U T D O O R P R O D U C T S
1. Mark hole locations, drill four 6mm holes and insert wall plugs parcel letterbox onto the brickwork with the screws provided.
Congratulations on purchasing the Lisbon parcel letterbox. We have designed the Lisbon to offer a stylish, efficient and convenient way to have parcels delivered securely to your home. It also receives large A4 envelopes and offers excellent security for your mail and parcels. The front door with keylock offers an easy and convenient means of retrieving your mail and parcels.
1. Mark hole locations, drill four 3mm holes.
2. Mount the parcel letterbox to the fence with the screws provided.
Using your Parcel Letterbox
1.0
Mounting onto a Brick Wall
Mounting onto a Timber Fence
1. Set the lock to the unlocked code (the factory default setting is 0-0-0) or your previously set personal combination. For new users we recommend setting the code one dial at a time until you become familiar with the technique
CAREFUL - DO NOT RELEASE THE RESET BUTTON UNTIL YOU HAVE SET AND MEMORISED YOUR CODE. IF YOU ACCIDENTALLY RELEASE THE RESET BUTTON THE LOCK WILL BE SET TO WHATEVER CODE YOU WERE AT.
3. Using the pin, press and HOLD the reset button down. Set your desired code (new users – set one dial at a time). Release the reset button to store your new code. Your new combination code is now set.
THE LOCATION OF THE RESET MAY DIFFER DEPENDING ON YOUR PRODUCT
00 0
2. There is a small hole on the side of the lock which gives access to the reset button. Push a pin or small nail into the hole.
- If you feel the spring of the reset button you can proceed with step 3.
- If you do not feel the spring of the reset button, rotate the lock (this will be either fully clockwise or anticlockwise depending on your product) and try again.
Resetting the Combination Lock Handy Hint
2.1 O U T D O O R P R O D U C T S
1 x
1 x
Zurich Fence Letterbox
Your carton should contain the parts: Back Box Front Panel Accessories Bag Timber Drill Bits Tape Measure Jigsaw Drill Required Tools
Front Panel
Front Parcel Door
3. Attach the front panel by inserting the 4 x mounting studs through the corresponding holes in the back box. Reach through the back door and secure with the nuts provided. Front Flange
Timber Fence Installation
4. Gently pull the front panel to remove it from the back box
1.0
3. Reach through the front parcel door and unscrew the 2 x top mounting nuts
1 x
1. Measure the back box, mark and cut a slightly larger hole into the fence using a jigsaw.
-
Choosing a Suitable Location
Removing the Front Panel for Installation
251Contents
-
(03)support@milkcan.com.auwww.milkcan.com.au9464696456NorthgateDrive,ThomastownVIC3043
following
Bottom Mounting Stud Centre Mounting Stud
-
2. Open the rear door and unscrew the 4 x mounting nuts
Reach through the front parcel door and secure the 2 x top mounting nuts.
The letterbox can be either mounted into a timber fence, or built into a brick or block wall. You will need to install it in a location that is easily accessible to Australia Post and couriers. The recommended height for the mail slot is 90 to 120cm from the ground.
2. Slide the back box through the front of the fence. Screw it to the fence with the screws provided (for hardwood fences, it is easier to pre-drill the screw holes).
1. Open the front parcel door
Firstly, remove the front panel by unscrewing the 6 x mounting nuts
Top Mounting Stud
Back Box
-
1. Build the brickwork up to the desired level and set the back box in
Renderplace.ed walls - set the back box forward to allow for the render thickness.
1.0
Using
Reach through the front parcel door and secure the 2 x top mounting nuts.
Brick Fence Installation
3. Once the brickwork and any rendering has been completed, attach the front panel by inserting the 4 x mounting studs through the corresponding holes in the back box. Reach through the back door and secure with the nuts provided.
Plain brick walls - the front anges should sit ush with the wall.
Mail and Parcels up to 16 x 32 x 20cm can be delivered via the front door. The courier simply pulls the front door open, places the parcel inside and closes the door. The parcel will fall into the retrieval area at the bottom. A specially designed internal oor stops anyone from reaching into the retrieval area when the chute is opened. This parcel letterbox is specially designed to allow mail and parcel delivery your Zurich
2. Complete the remaining brickwork around the letterbox.
You will need to install it in a location that is easily accessible to Australia Post and couriers.
3. Tap the expansion bolt fully down. If you encounter some resistance, you may need a hammer to tap the bolt further into the concrete.
Installation using the expansion bolt
3. Place the letterbox back over the concrete hole just drilled. To bolt the letterbox to the concrete oor, refer to the steps below
566 - 10mm Masonry Drill Bit Tools Required - Hammer Drill - Spirit Level
Choosing a Suitable Location
6. Place the letterbox back over the concrete hole just drilled. To bolt the letterbox to the concrete oor, refer to the steps below.
Parcel Pal 2 Pillar (03)support@milkcan.com.auwww.milkcan.com.au9464696456NorthgateDrive,ThomastownVIC3043
2. Insert the expansion bolt into the concrete through the hole in the base of the letterbox.
1. Dig a hole approximately 45cm x 45cm x 10cm deep.
Installation onto an existing concrete oor Installation onto ground
2. Fill hole with concrete.
You will need to install a small concrete slab that is suitable for your parcel letterbox to be bolted onto.
2. Drill a hole (10mm diameter x 70mm deep) into the concrete oor for the mounting bolt.
3. Use a spirit level to level the concrete and then leave it to fully dry
1. Check the nut on the expansion bolt has not been tightened, it needs to be loose.
4. Place your letterbox onto the concrete slab and mark the mounting hole with a pencil.
5. Drill a hole (10mm diameter x 70mm deep) into the concrete slab for the mounting bolt.
4. Tighten the nut with the tube spanner provided.
1.0
45cm10cm 45cm
1. Place your letterbox in the chosen location and mark the mounting hole with a pencil.
Resetting the Combination Lock
Push a pin or small nail into the hole.
Set your desired code (new users – set one dial at a time). Release the reset button to store your new code. Your new combination code is now set.
3. Using the pin, press and HOLD the reset button down.
Parcels up to 23 x 28 x 31cm can be delivered via the parcel chute. The courier simply pulls the door down, places the parcel inside and closes the door. The parcel will fall into the retrieval area at the bottom. A specially designed internal ap stops anyone from reaching into the retrieval area when the chute is opened.
THE LOCATION OF THE RESET MAY DIFFER DEPENDING ON YOUR PRODUCT
1. Set the lock to the unlocked code (the factory default setting is 0-0-0) or your previously set personal combination. For new users we recommend setting the code one dial at a time until you become familiar with the technique
CAREFUL - DO NOT RELEASE THE RESET BUTTON UNTIL YOU HAVE SET AND MEMORISED YOUR CODE. IF YOU ACCIDENTALLY RELEASE THE RESET BUTTON THE LOCK WILL BE SET TO WHATEVER CODE YOU WERE AT.
For example, the delivery instruction for your parcel letterbox with the lock code set to 321 could be: “PLACE IN LETTERBOX. USE CODE 321 TO OPEN.”
- If you feel the spring of the reset button you can proceed with step 3.
Using your Parcel Pal 2
Larger parcels (e.g. a box of wine) need to be delivered via the lower door with combination lock. The courier simply enters the allocated combination code to unlock the front door. The courier places the parcel inside, closes the door and re-toggles the combination. Most courier services have the provision for special delivery instructions to be included with a parcel. When you purchase an item to be delivered, let the supplier know the instruction for opening the combination lock.
2. There is a small hole on the side of the lock which gives access to the reset button.
Handy Hint
1.0
- If you do not feel the spring of the reset button, rotate the lock (this will be either fully clockwise or anticlockwise depending on your product) and try again.
LISBON PARCEL LETTERBOX - LEG KIT - Leg Kit
Assembly
3. Stand letterbox upside down on a soft surface and attach brace with 4 x M6 Screws.
1. Lay one of the panels on a smooth surface Place the Lisbon letterbox over the studs as shown. Secure in place using the 4 nuts provided.
791L2-1.1 O U T D O O R P R O D U C T S
2. Repeat Step 1 for the other panel.
791L2
Congratulations on purchasing the Leg Kit to accompany the Lisbon letterbox. This Leg Kit allows the Lisbon to be installed as a stylish and convenient freestanding letterbox that is ideal for receiving large A4 size envelopes and satchels.
4. Fit the base plate into the ends of the side panels. Note the alignment of the base plate as shown in detail. Secure the base plate with the 4 x M6 Screws.
O U T D O O R P R O D U C T S
3. Place the letterbox back in position over the hole. Insert the mounting bolt through the hole in the mounting plate of the letterbox and tap it down into the concrete until the nut is touching the mounting plate Tighten the nut with the tube spanner provided.
3. Use a spirit level to level the concrete and then leave it to fully dry
6. Place the letterbox back in position over the hole Insert the mounting bolt through the hole in the mounting plate of the letterbox and tap it down into the concrete until the nut is touching the mounting plate Tighten the nut with the tube spanner provided.
The Lisbon parcel letterbox receives parcels and general mail. You will need to mount it in a location that is easily accessible to Australia Post and couriers. This will typically be at your front boundary
2 Fill hole with concrete. You will need to install a small concrete slab that is suitable for your parcel letterbox to be bolted onto
Installation
7. Place the cover plate over the base
5. Drill a hole (10mm diameter x 60mm deep) into the concrete slab for the mounting bolt.
2.pencil.Drilla hole (10mm diameter x 60mm deep) into the concrete floor for the mounting bolt.
4. Place the cover plate over the base
Mounting onto an existing concrete floor Mounting onto ground
4. Place your letterbox onto the concrete slab and mark the mounting hole with a pencil.
1. Dig a hole approximately 30cm x 35cm x 10cm deep
10cm 35cm
FRONT
791L2-1.1
1. Place your letterbox in the chosen location and mark the mounting hole with a
30cm
Installation onto an existing concrete oor Installation onto ground
4. Place your letterbox onto the concrete slab, remove the base plug and mark the mounting hole with a pencil.
5. Drill a hole (10mm diameter x 70mm deep) into the concrete slab for the mounting bolt.
1. Place your letterbox in the chosen location, remove the base plug and mark the mounting hole with a pencil.
- Spirit Level - Hammer Drill -
Choosing a Suitable Location
2. Drill a hole (10mm diameter x 70mm deep) into the concrete oor for the mounting bolt.
3. Use a spirit level to level the concrete and then leave it to fully dry
3. Place the letterbox back over the concrete hole just drilled. To bolt the letterbox to the concrete oor, refer to the steps below
2. Insert the expansion bolt into the concrete through the hole in the base of the letterbox.
Required 10mm Masonry Drill (03)support@milkcan.com.auwww.milkcan.com.au9464696456NorthgateDrive,ThomastownVIC3043
Vienna 2 Pillar
6. Place the letterbox back over the concrete hole just drilled. To bolt the letterbox to the concrete oor, refer to the steps below
You will need to install a small concrete slab that is suitable for your parcel letterbox to be bolted onto.
3. Tap the expansion bolt fully down. If you encounter some resistance, you may need a hammer to tap the bolt further into the concrete.
Installation using the expansion bolt
Bit Tools
1. Dig a hole approximately 30cm x 35cm x 10cm deep.
2. Fill hole with concrete.
786
You will need to install it in a location that is easily accessible to Australia Post and couriers.
4. Tighten the nut with the tube spanner provided. Re t the base plug.
1.0 10cm 30cm FRONT35cm
1. Check the nut on the expansion bolt has not been tightened, it needs to be loose.
2. There is a small hole on the side of the lock which gives access to the reset button.
This parcel letterbox is specially designed to allow mail and parcel delivery. Parcels up to 19 x 25 x 34cm can be delivered using the combination lock. The courier simply enters the allocated combination code to unlock the front door. The courier places the parcel inside, closes the door and re-toggles the combination.
For example, the delivery instruction for your parcel letterbox with the lock code set to 321 could be: “PLACE IN LETTERBOX. USE CODE 321 TO OPEN”.
- If you do not feel the spring of the reset button, rotate the lock (this will be either fully clockwise or anticlockwise depending on your product) and try again.
1. Set the lock to the unlocked code (the factory default setting is 0-0-0) or your previously set personal combination. For new users we recommend setting the code one dial at a time until you become familiar with the technique
Push a pin or small nail into the hole.
3. Using the pin, press and HOLD the reset button down.
Most courier services have the provision for special delivery instructions to be included with a parcel. When you purchase an item to be delivered, let the supplier know the instruction for opening the combination lock.
CAREFUL - DO NOT RELEASE THE RESET BUTTON UNTIL YOU HAVE SET AND MEMORISED YOUR CODE. IF YOU ACCIDENTALLY RELEASE THE RESET BUTTON THE LOCK WILL BE SET TO WHATEVER CODE YOU WERE AT.
Set your desired code (new users – set one dial at a time). Release the reset button to store your new code. Your new combination code is now set.
- If you feel the spring of the reset button you can proceed with step 3.
Resetting the Combination Lock
Handy Hint
THE LOCATION OF THE RESET MAY DIFFER DEPENDING ON YOUR PRODUCT
Using your Vienna 2 1.0
Congratulations on purchasing the Camden parcel letterbox. We have designed the Camden to offer a stylish, efficient and convenient way to have parcels delivered securely to your home. It also receives large A4 envelopes and offers excellent security for your mail and parcels. The rear door with keylock offers an easy and convenient means of retrieving your mail and parcels.
Mounting onto an existing concrete floor Mounting onto ground
1. Place your letterbox in the
1. Dig a hole approximately 30cm x 40cm x 10cm deep
Installation
You will need to install a small concrete slab that is suitable for your parcel letterbox to be bolted onto.
3. Use a spirit level to level the concrete and then leave it to fully dry
2. Fill hole with concrete
The Camden parcel letterbox receives parcels and general mail. You will need to mount it in a location that is easily accessible to Australia Post and couriers. This will typically be at your front boundary
6. Bolt the letterbox to the concrete slab with the mounting bolt provided
the concrete floor with the mounting bolt provided
2.withthelocationchosenandmarkmountingholeapencilDrillahole(10mmdiameterx60mmdeep)intotheconcretefloorforthemountingbolt3.Bolttheletterboxto
4. Place your letterbox onto the concrete slab and mark the mounting hole with a pencil
5. Drill a hole (10mm diameter x 60mm deep) into the concrete slab for the mounting bolt
1.0 O U T D O O R P R O D U C T S
Using your Parcel Letterbox
30cm10cm 40cm FRONT
Parcels up to 18 x 24 x 31cm can be delivered via the parcel chute. The courier simply lifts the roof up, places the parcel inside and closes the roof. The parcel will fall into the retrieval area at the bottom. A specially designed internal flap stops anyone from reaching into the retrieval area when the roof is opened.
CAMDEN PARCEL LETTERBOX Installation Instruction Sheet
5. Drill a hole (10mm diameter x 60mm deep) into the concrete slab for the mounting bolt 35cm FRONT
O U T D O O R P R O D U C T S
Congratulations on purchasing the Austin parcel letterbox. We have designed the Austin to offer a stylish, efficient and convenient way to have parcels delivered securely to your home. It also receives large A4 envelopes and offers excellent security for your mail and parcels. The rear door with keylock offers an easy and convenient means of retrieving your mail and parcels.
the concrete floor with the mounting bolt provided.
2. Fill hole with concrete
4. Place your letterbox onto the concrete slab and mark the mounting hole with a pencil
30cm10cm
Parcels up to 15 x 23 x 26cm can be delivered via the parcel chute. The courier simply pulls the door down, places the parcel inside and closes the door. The parcel will fall into the retrieval area at the bottom. A specially designed internal flap stops anyone from reaching into the retrieval area when the chute is opened.
1.0
1. Place your letterbox in the
1. Dig a hole approximately 30cm x 35cm x 10cm deep
AUSTIN PARCEL LETTERBOX
6. Bolt the letterbox to the concrete slab with the mounting bolt provided.
Mounting onto an existing concrete floor Mounting onto ground
Installation Instruction Sheet
3. Use a spirit level to level the concrete and then leave it to fully dry
You will need to install a small concrete slab that is suitable for your parcel letterbox to be bolted onto.
Using your Parcel Letterbox
2.withthelocationchosenandmarkmountingholeapencilDrillahole(10mmdiameterx60mmdeep)intotheconcretefloorforthemountingbolt3.Bolttheletterboxto
Installation
The Austin parcel letterbox receives parcels and general mail. You will need to mount it in a location that is easily accessible to Australia Post and couriers. This will typically be at your front boundary