Automotech Brochure 2022

S R CH EM O AT IT F P L CK IS AL STO TE D IN DIA E M IM

Automotech Services Ltd 

GARAGE EQUIPMENT 

Specialists in vehicle lifts and garage equipment

50 YEARS



E S T 19 7 2 

Issue 02-22

Call now: 01889 579945 www.automotechservices.co.uk

Specialists in vehicle lifts and garage equipment

Two Post Lifts

3T

DELIVERY FROM AS LITTLE AS £50

LIFTING

AUTOMATIC ARM LOCKS

AS-230SP 3T Capacity Short 2 Post Lift This lift has been designed by Automotech Services for customers who require the versatility of a 2 Post Lift but have a low ceiling or roof height. The post height is only 2024mm which is ideal for many workshops and domestic garages.

• • • • • • • • • •



670mm-1010mm



790mm-1185mm

Features 3000Kg Capacity Post height 2024mm Outside post width 3290mm Low profile screw adjustable lift pads at 100mm Lifting height 1500mm Lift pad extensions included Floor bolts included Low maintenance due to hydraulic design Parachute valves inside hydraulic rams Low voltage control system



ONLY

£1,470



+ VAT

LIFT PAD EXTENSIONS INCLUDED



3290mm

50mm





Post height only 2024mm

24V CONTROLS Our lifts are fitted with a low voltage control system





Dimensions

Automotech was established in 1972

2024mm

Call now: 01889 579945

100mm

Call now: 01889 579945 www.automotechservices.co.uk AS-230NSP 3T Capacity Short 2 Post Lift



 Post height only 2024mm Outside post width only 2860mm





2024mm

2860mm

LIFT PAD EXTENSIONS INCLUDED



This lift has been designed by Automotech Services for customers who require the versatility of a 2 Post Lift but have a low ceiling in addition to a narrow workshop space. The post height is only 2024mm and the outside width only 2860mm. This makes the machine ideal for domestic workshops.

• • • • • • • • • •

Features 3000Kg Capacity Post height 2024mm Outside post width 2860mm Low profile screw adjustable lift pads at 100mm Lifting height 1500mm Lift pad extensions included Floor bolts included Low maintenance due to hydraulic design Parachute valves inside hydraulic rams Low voltage control system

ONLY

£1,470

50mm





+ VAT

100mm

Post height only 2024mm

24V CONTROLS Our lifts are fitted with a low voltage control system





670mm - 1010mm



Automatic arm locks 

All our new equipment comes with 12 months’ warranty as standard

Dimensions

Specialists in vehicle lifts and garage equipment

Two Post Lifts

3.5T LIFTING

TELESCOPIC ARMS

AS-235SB Twin Hydraulic Ram, 2 Post Lift This two post lift uses a twin hydraulic ram design for steady raising and lowering operation.

This sturdy proven lift will give you trouble free service for many years.



• • • • • •

DELIVERY FROM AS LITTLE AS £50

800mm-1200mm



Features Lifting capacity 3.5T Lifting height 1900mm Minimum height 110mm Manual safety locks in each post Lift pad extensions optional Single or 3 phase option

Automatic arm locks



ONLY

£1,350

+ VAT

Our lifts are fitted with a low voltage control system





210mm 



800mm-1200mm

110mm

Dimensions

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-235SBA Twin Hydraulic Ram, 2 Post Lift With Single Point Safety Lock Release AUTOMATIC ARM LOCKS

Our automatic arm locks are fully approved, tested and safe.

They automatically disengage when the lift is lowered



24V CONTROLS

Our lifts are fitted with a low voltage control system



This two post lift uses a twin hydraulic ram design and a single point safety lock release system. This sturdy proven lift will give you trouble free service for many years.

• • • • • •

3.5T LIFTING

Features Lifting Capacity 3.5T Lifting height 1900mm Minimum height 110mm Automatic safety locks in each post Lift pad extensions optional Single or 3 phase option

ONLY 

£1,599

+ VAT

Single point safety lock release

110mm 210mm



TELESCOPIC ARMS



800mm - 1200mm



800mm - 1200mm 

All our new equipment comes with 12 months’ warranty as standard

Dimensions

Specialists in vehicle lifts and garage equipment

Two Post Lifts AS-235SBE 3.5 T Capacity 2 Post Lift With “H” Base Plate

TELESCOPIC ARMS

The AS-235SBE with a full “H” style base plate. This machine is ideal for situations when the concrete floor has a minimum depth or imperfections in the surface. The twin hydraulic ram design gives a steady raising and lowering trouble free operation.

Features • 3500Kg capacity • Full “H” style base plate • Low profile double screw adjustable lift pads at 120mm • Lifting height 1900mm • Outside post width 3420mm • Post height 2900mm • Floor bolts included • Manual safety locks in each post • Low maintenance due to hydraulic design • Low voltage control system • Single or 3 phase option

ONLY

£1,690

DELIVERY FROM AS LITTLE AS £50





665mm-1215mm

120mm-210mm

AUTOMATIC ARM LOCKS

Our automatic arm locks are fully approved, tested and safe.

They automatically disengage when the lift is lowered



24V CONTROLS Our lifts are fitted with a low voltage control system



3.5T

+ VAT

LIFTING

“H” STYLE BASE PLATE For situations when the concrete floor has a minimum depth or imperfections in the surface





Dimensions

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-6140A Twin Hydraulic Ram, 2 Post Lift This lift is simple and robust. Uses a twin hydraulic ram design for steady raising and lowering operation. Although 4T capacity you can still lift the smallest cars with this machine.

50mm low clearance base plate





• • • • • •

Automatic arm locks

980mm 1420mm

740mm 1310mm





Now with 2 and 3 stage telescopic arms

Features Lifting capacity 4T Lifting height 1900mm Minimum height 98mm Manual safety locks in each post Lift pad extensions included (for vans / 4X4) Single or 3 phase option

ONLY



£1,499

+ VAT

4T LIFTING



Lift pad extensions for vans / 4x4 included

Extra lifting pad for long arms



150mm extension



75mm extension



50mm extension





Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Two Post Lifts

DELIVERY FROM AS LITTLE AS £50

AS-6240TA Twin Hydraulic Ram, Clear Floor, 2 Post Lift This lift is simple and robust. Uses a twin hydraulic ram design for steady raising and lowering operation.

Although 4T capacity you can still lift the smallest cars with this machine.

Features Lifting capacity 4T Lifting height 1900mm Minimum height 98mm Manual safety locks in each post Safety shut-off bar on the overhead bridge • Lift pad extensions included (for vans / 4X4) • Single or 3 phase option • • • • •

Our lifts are fitted with a low voltage control system



ONLY

£1,699

4T

+ VAT

LIFTING



Lift pad extensions for vans / 4x4 included

Extra lifting pad for long arms



150mm extension

 

Dimensions

Automotech was established in 1972

75mm extension



50mm extension



Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-6246/H1 Twin Hydraulic Ram Clear Floor 2 Post Lift ASYMMETRICAL

This lift uses direct drive hydraulic rams and a single point safety lock release system. This means there are very few moving parts and components within the vehicle lift. The folded column design increase the post strength and also enables the lift to be installed in either Symmetrical or Asymmetrical configuration.

Although 4T capacity the smallest and lowest cars can still be lifted using this machine, with the lift pad lowest height at just 85mm.

SYMMETRICAL

• • • • • • • • •

Can be installed in asymmetrical or symmetrical configuration



80mm lift pad extensions + holder included

Features Lifting capacity 4T Lifting height 1800mm Minimum height 85mm Single point manual safety locks Double screw pad adapters Asymmetrical or Symmetrical configuration Safety shut off bar on the overhead bridge Lift pad extensions included (for vans / 4X4) Single phase or 3 phase option



ONLY

£2,150

+ VAT

Our lifts are fitted with a low voltage control system



100mm



170mm

85-150

1800

C.E. APPROVED LOCKS

4020



1794

25mm

4162



2850

3436

Our automatic arm locks are fully approved, tested and safe. Automatically disengage when the lift is lowered

24V at the buttons

70 14 089



70 -14 890



Dimensions for symmetrical configuration



600 -11 00

All our new equipment comes with 12 months’ warranty as standard

0 10 0-1 60

Specialists in vehicle lifts and garage equipment

Two Post Lifts

DELIVERY FROM AS LITTLE AS £50

AS-6150A Twin Hydraulic Ram, 2 Post Lift

C.E. approved locks automatically disengage when lift is lowered



This lift is ideal for lifting large vans and commercial vehicles, with its huge lifting capacity of 5000Kg. The design of the arms will also allow the machine to be used on cars.

Lift pad extensions included



Features • Lifting capacity 5T • Lift height 1900mm • Minimum height 120mm • 3 stage lifting arms • Safety locks in each post • Lift pad extensions included • 240v single phase or 415v 3 phase

180mm extension



ONLY

£2,450

80mm extension



+ VAT 50mm extension



5T LIFTING



Dimensions



860mm - 1800mm

Automotech was established in 1972



860mm - 1800mm

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk POST HEIGHT OPTIONS 4300mm 4600mm

Model AS-6350A/H

4800mm 5100mm

Model AS-6350A/H1

AS-6350A 5T Twin Hydraulic Ram Clear Floor 2 Post Lift This lift is ideal for lifting large vans and commercial vehicles where a clear floor is required. The lifting capacity of 5000Kg and arms which will extend to 1800mm makes this two post lift very stable when lifting long wheel base vans. The unique design of the arms will also allow the machine to be used on cars as the lift pad minimum height is only 120mm.

24V CONTROLS  Our lifts are fitted with a low voltage control system as standard

• • • • • • • • • •

5T LIFTING

Features Lifting capacity 5000Kg Lift height 1900mm Minimum height 120mm 3 stage lifting arms Safety locks in each post Lift pad extensions included 240v single phase or 415v 3 phase Floor Bolts Included Fully C.E. approved Low voltage control system (as required by regulations)

ONLY

£2,499

+ VAT

C.E. approved locks automatically disengage when lift is lowered





860mm

Includes 2 sets of lift pad extensions



50mm extension



80mm extension



180mm extension



80mm extension





180mm

extension



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Two Post Lifts

Please contact us for information

AS-6255TD 5.5T Capacity 2 Post Lift With Twin Hydraulic Rams The AS-6255TD has a massive lifting capacity of 5500Kg making this vehicle lift ideal for the larger vans and commercial vehicles. The folded column design increases the post strength, this gives minimum post flex.

Includes 2 sets of lift pad extensions and arm extensions



Features • 5500Kg capacity • Single point safety lock release • Lifting height 1950mm • Minimum lift pad height 106mm • 3 stage lift arms • Safety shut off bar on the overhead bridge • Low profile double screw adjustable lift pads • Lift pad extensions included • Arm extensions included • Floor bolts included • Single or 3 phase option



Double thread adjustable lift pads

LIFT PAD EXTENSIONS 



180mm

80mm

ONLY

£2,599

+ VAT ARM EXTENSIONS

POST HEIGHT SETTINGS

2530

2906

This gives a maximum arm length of 1950mm



5200mm 5320mm  5420mm





5200 - 5320 - 5420 5075 - 5195 - 5295

Min 106 - Max 1949

3 STAGE SYMMETRICAL TELESCOPIC ARMS

3500 

250mm





Dimensions 0 95 x1 Ma

n) sio ten ex h it (w



Ma x1 70 0

in M

0 82

Automotech was established in 1972

1700mm



820mm

Call now: 01889 579945

Automatic arm locks

Specialists in vehicle lifts and garage equipment

Single Post Lifts 24V CONTROLS

Our lifts are fitted with a low voltage control system



 Four extendable swivel lifting arms allow easy access and clearance

AS-7251 Single Post Vehicle lift This lift is designed for workshops where space is at a premium. It is totally mobile and can be moved by one person with ease once unloaded.

The lift has the added advantage over other mobile vehicle lifts in that it will lift to a full working height like any conventional two post vehicle lift.

• • • • • •

Features Lifting capacity 2.5T Lifting Height 1755mm Fully Mobile (When unloaded) Four Extendable Swivel Lifting Arms Double Screw Adjustable Lift Pads 12 piece Lift Pad Adaptor Kit Included (For vans / 4×4)

ONLY

£2,350

+ VAT

2.5T LIFTING



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Single Post Lifts

Installation service available Please contact us for information

Extendable swivel lifting arms allow easy access and clearance



AS-7251DC Battery Operated Mobile Single Post Vehicle lift This life is designed for workshops where space is at a premium. It is totally mobile and can be moved by one person with ease once unloaded.

This machine is operated by a powerful 24v DC Battery pack, which gives it the advantage of having no trailing wires during operation.

• • • • • • •

Features 24v D.C. Lifting Capacity 2.5T Lifting Height 1755mm Fully Mobile (When unloaded) Four Extendable Swivel Lifting Arms Double Screw Adjustable Lift Pads 12 piece Lift Pad Adaptor Kit Included (For vans / 4×4)

Lift pad adaptor kit included



ONLY

£2,575



+ VAT

2.5T LIFTING

 24v D.C. Battery operated

50mm

 100mm

 Built in 240v - 24v D.C. charger

 150mm



Dimensions

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk Lift pad adaptor kit included





AS-7251B Single Post Vehicle lift This liftis designed for workshops where space is at a premium. This lift takes up very little space and can be installed where there is no room for a conventional vehicle lift. The four swivel lifting arms are easily adjusted, they will lock automatically and stay in place during operation.

50mm

 100mm

• • • • • • •

Features Lifting capacity 2.5T Lifting Height 1755mm Four Extendable Swivel Lifting Arms Double Screw Adjustable Lift Pads 12 piece Lift Pad Adaptor Kit Included (For vans / 4×4) Floor Bolts Included

 150mm

ONLY

£2,250

+ VAT

2.5T LIFTING



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Four Post Lifts

Please contact us for information

OPTIONAL JACKING BEAM

AS-4T36 Mobile 4 Post Parking Lift

Features Lifting capacity 3.6T Lifting height 1900mm Platform length 4200mm Full Mobile Wheel Kit Included 3pcs Oil Drip Trays Included 1pcs Jack Tray Included

820mm Robust mechanical safety lock system



Dual safety locks at each post



Maximum height 360mm

• • • • • •

2.5T jacking beam 



This lift is the ideal lift for vehicle storage when space is tight. The lift can be moved within minutes with the aid of the mobile wheel kit provided. The perfect lift for Classic car restoration enthusiasts as the lift can also be used as a conventional 4 post lift.





Extendable to 1130mm

ONLY

£2,350

+ VAT

Three piece oil drip tray and jack tray included







Dimensions

Full mobile wheel kit included

3.6T LIFTING

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk OPTIONAL JACKING BEAM 

AS-4T36S Mobile 4 Post Parking Lift

2.5T jacking beam 

820mm

This lift has a bed length of just 3200mm. This makes this four post lift ideal for vehicle storage when space is at a premium. The lift can be moved within minutes with the aid of the mobile wheel kit provided. The perfect lift for Classic car restoration enthusiasts as the lift can also be used as a conventional 4 post lift for servicing.

Robust mechanical safety lock system



Dual safety locks at each post

Full mobile wheel kit included





Maximum height 360mm





Extendable to 1130mm

• • • • • •

Features Lifting capacity 3.6T Lifting height 1900mm Platform length 3200mm Full Mobile Wheel Kit Included 3pcs Oil Drip Trays Included 1pcs Jack Tray Included

ONLY

£2,450

+ VAT

3.6T LIFTING



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Four Post Lifts

Installation service available Please contact us for information

AS-4T36D Mobile 4 Post Double Parking Lift This lift is the perfect solution when vehicle storage space is at a premium. The extra wide lifting bed allows the machine to raise and store two vehicles simultaneously, saving on valuable storage space.

The vehicle lift can be easily moved with the aid of the mobile wheel kit which is provided. 

• • • • • • • • • •

2082mm of clearance

Features Lifting capacity 4.5T Lifting height 2082mm Platform length 4865mm Machine width 5580mm Full Mobile Wheel Kit Included Floor bolts included 6pcs Oil Drip Trays Included 2pcs Jack Trays Included Twin safety locks in each post 240v Single Phase with low voltage control system

6 oil drip trays and 2 jack trays included



ONLY

£3,445

+ VAT Duel safety locks at each post







Removable drive on ramps



Low voltage control system

Dimensions

Automotech was established in 1972

Call now: 01889 579945



Mobile wheel kit included

Call now: 01889 579945 www.automotechservices.co.uk

Figure Figure 3a – LIFT 3aDimensions – LIFT LAYOUT LAYOUT - STANDARD - STANDARD TYPE TYPE 

AS-6745P 4.2T 4 Post Vehicle Lift This lift is capable of lifting vehicles up to 4200Kg. The lift platform has a low profile of 130mm from the ground and is fitted with 970mm long drive on ramps. This means the lift can handle low riding cars as well as light commercial vehicles.

The AS-6745P has a 2500Kg rolling jacking beam fitted as standard to give a wheel free operation.

The platform length of 4800mm makes this lift a great all-round machine.

Figure Figure 3b – 3b LIFT – LIFT LAYOUT LAYOUT – ALIGNMENT – ALIGNMENT TYPE TYPE

Dual safety locks at each post



Features • 4200 Kg capacity • 2500Kg Jacking Beam included (with rubber lifting blocks and extensions) • Extra-long drive up ramps • Mechanically operated safety locks • Hydraulic failure safety devices • Mechanical failure safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system (as required by regulations)

ONLY

£3,450

4.2T



+ VAT

2500Kg Jacking beam included

LIFTING

10 / 3210 / 32 

766mm



428mm

REV. 01 REV. 201401 2014

24V CONTROLS  Our lifts are fitted with a low voltage control system as standard

All our new equipment comes with 12 months’ warranty as standard



1626mm

Specialists in vehicle lifts and garage equipment

Installation service available

Four Post Lifts

Please contact us for information

Figure 3b – LIFT LAYOUT – ALIGNMENT TYPE Figure 3b – LIFT LAYOUT – ALIGNMENT TYPE 

Dimensions

AS-6745 4.2T 4 Post Alignment Vehicle Lift

REV. 01 2014



Features 4200 Kg capacity 2500Kg Jacking Beam included (with rubber lifting blocks) Front turn plates included Rear slip plates Extra-long drive up ramps Mechanical operated safety locks Hydraulic failure safety devices Mechanical failure safety locks Floor bolts included Fully C.E. approved Low voltage control system (as required by regulations)

ONLY

£3,750

+ VAT

TURN PLATES INCLUDED







300mm







1626mm

766mm

4.2T LIFTING

24V CONTROLS  Our lifts are fitted with a low voltage control system as standard

45mm

400mm

400mm

Automotech was established in 1972

Dual safety locks at each post



10 / 32 2500Kg Jacking beam included

428mm

• • • • • • • • • • • •

10 / 32

REV. 01 2014



This 4 post lift is designed for vehicle wheel alignment adjustment and the servicing of vehicles. The AS-6745 Is capable of lifting vehicles up to 4200Kg. The machine is fitted with front removable turn plates and multi-directional lockable rear slip plates on to the 4800mm long lift bed. When the lift is operated for service work the front turn plate recesses can be covered giving the lift platform a uniform flat working area. The lift is fitted with 970mm long drive on ramps, this means the lift can handle low riding cars as well as light commercial vehicles. The AS-6745 has a 2500Kg rolling jacking beam fitted as standard to give a wheel free operation.

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-6764P 6.4T Four Post Lift 

3200Kg Jacking beam included



915mm



1473mm



1800mm

Dual safety locks at each post



This four post lift has the added advantage of being capable of lifting up to 6.4T without compromising its capabilities for lifting normal passenger cars. With its extra-long drive on ramps and 178mm low level lifting bed it is capable to load low riding vehicles with ease. The lift has a bed length of 5216mm to accommodate long wheel base and light commercial vehicles.

Features • Lifting capacity 6.4T • 3200Kg Jacking Beam included (with rubber lifting blocks) • Extra-long drive up ramps • Mechanical Air operated safety locks • Hydraulic failure safety devices • Mechanical failure safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system (as required by regulations)

ONLY

£4,650

VAT

6.4T LIFTING

Our lifts are fitted with a low voltage control system





Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Four Post Lifts 

Please contact us for information

3200Kg Jacking beam included

AS-6764 6.4T Four Post Alignment Vehicle Lift This alignment 4 post lift is designed for vehicle wheel alignment adjustment and the servicing of vehicles. The machine is fitted with front removable turn plates and multi-directional lockable rear slip plates on to the 5216mm long lift bed. The lift has the added advantage of being capable of lifting up to 6.4T without compromising its capabilities for lifting normal passenger cars.

When the lift is operated for service work the front turn plate recesses can be covered giving the lift platform a uniform flat working area.

Features • Lifting capacity 6.4T • 3200Kg Jacking Beam included (with rubber lifting blocks) • Extra-long drive up ramps • Mechanical Air operated safety locks • Hydraulic failure safety devices • Mechanical failure safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system (as required by regulations)





915mm



1473mm



1800mm

3200kg jacking beam included

ONLY

£5,200



+ VAT

Dimensions

Automotech was established in 1972

Call now: 01889 579945

Dual safety locks at each post





Turn plates included

6.4T LIFTING

Specialists in vehicle lifts and garage equipment

Scissor Lifts AS-8240TP 4T Capacity Scissor Lift



This machine has all the advantages of a 4 post lift without the restrictions of the posts taking up valuable workshop space. The scissor lift can be surface mounted or flush fitted. When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles.

80mm

Optional flush mount drive on ramps, for infloor installation

 

180mm

Jacking beam lift pad extensions included





2500kg jacking beam included

ONLY Our lifts are fitted with a low voltage control system



4T

Features • Lifting capacity 4T • 2500Kg Jacking Beam included (includes lift pad extensions) • Can be surface mounted or flush mounted • Extra-long drive up ramps • Hydraulic failure safety devices • Mechanical air operated safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system (as required by regulations)

£4,460



VAT

Dimensions for on-ground installation

LIFTING

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Scissor Lifts

Please contact us for information

AS-8240TX 4T Alignment Scissor Lift This machine is designed for wheel alignment and the servicing of vehicles. The machine is fitted with lockable rear slip plates and front turn plates as standard for wheel alignment operation.

The front turn plate covers can be fitted when the turn plate operation is not required. Also fitted as standard is the 2500Kg rolling jacking beam with screw pad adapters to accommodate all vehicles.

When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles.



80mm



180mm

Optional flush mount drive on ramps, for infloor installation



• • • • • • • • • • •

Features Lifting capacity 4T Lifting height 2160mm Minimum height 290mm Can be surface mounted or flush mounted Front turn plates included Turn plate covers included Extra long rear slip plates Extra long drive up ramps Hydraulic failure safety devices Mechanical safety locks Low voltage control system (as required by regulations)

Jacking beam lift pad extensions included





2500kg jacking beam included



Turn plates included

Our lifts are fitted with a low voltage control system



ONLY

£4,680

+ VAT

Air operated Safety locks



4T LIFTING

Dimensions for on-ground installation



Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-8240T 4T Alignment Scissor Lift The alignment scissor lift has the added advantage of having the built in secondary, wheel free scissor lift. The lift can be surface mounted or flush mounted. When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles. The vehicle lift comes fitted with rear slip plates at a length of 1563mm making the machine able to accommodate small cars and light commercial vehicles for wheel alignment operations.



80mm



180mm

Optional flush mount drive on ramps, for infloor installation



Jacking beam lift pad extensions included





2500kg jacking beam included

Rear multidirectional slip plates





Turn plates included

Built in, wheel free scissor lift



 Front turn plates with covers

Features • Lifting capacity 4T • 4T Capacity secondary wheel free scissor lift • 2500Kg Jacking Beam included (includes lift pad extensions) • Can be surface mounted or flush mounted • Front turn plates included • Turn plate covers included • Rear slip plates • Extra-long drive up ramps • Hydraulic failure safety devices • Mechanical safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system (as required by regulations)

ONLY

£4,950

Our lifts are fitted with a low voltage control system

+ VAT





Dimensions for on-ground installation

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Scissor Lifts AS-8250P 5T Alignment Scissor Lift This machine has all the advantages of a 4 post lift without the restrictions of the posts taking up valuable workshop space. This scissor lift can be surface mounted or flush fitted. When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles. The lift platforms are fabricated from high quality plasma cut steel giving a uniform flat working area.

The lift is also supplied with the 2500Kg Air / hydraulic rolling jacking beam with screw pad adapters to accommodate all vehicles.



80mm

Features • Lifting capacity 5T • 2500Kg Jacking Beam included (includes lift pad extensions) • Can be surface mounted or flush mounted • Extra-long drive up ramps • Hydraulic failure safety devices • Mechanical air operated safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system (as required by regulations)

180mm

Jacking beam lift pad extensions included





2500kg jacking beam included

ONLY

£4,780

+ VAT

Our lifts are fitted with a low voltage control system

 

Dimensions for on-ground installation

Automotech was established in 1972

Optional flush mount drive on ramps, for infloor installation

 

Call now: 01889 579945

5T LIFTING

Call now: 01889 579945 www.automotechservices.co.uk AS-8250N 5T Alignment Scissor Lift



This machine is designed for wheel alignment and the servicing of vehicles. The machine is fitted with lockable rear slip plates and front turn plates as standard for wheel alignment operation.

The front turn plate covers can be fitted when the turn plate operation is not required. Also fitted as standard is the 2500Kg rolling jacking beam with screw pad adapters to accommodate all vehicles.

When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles.

80mm

Optional flush mount drive on ramps, for infloor installation

 

180mm

Jacking beam lift pad extensions included





2500kg jacking beam included



Turn plates included

• • • • • • • • • • •

Features Lifting capacity 5T Lifting height 2160mm Minimum height 290mm Can be surface mounted or flush mounted Front turn plates included Turn plate covers included Extra long rear slip plates Extra long drive up ramps Hydraulic failure safety devices Mechanical safety locks Low voltage control system (as required by regulations)

ONLY

£4,900

+ VAT

5T LIFTING

Our lifts are fitted with a low voltage control system





Dimensions for on-ground installation

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Scissor Lifts

Please contact us for information

AS-8250A1 5T Alignment Scissor Lift The perfect solution for wheel alignment operations and the servicing of vehicles. This alignment scissor lift has the added advantage of having the built in secondary, wheel free scissor lift. The lift can be surface mounted or flush mounted. When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles.



Features • Lifting capacity 5T • 4000 Kg Capacity secondary wheel free scissor lift • 2500Kg Jacking Beam included (includes lift pad extensions) • Can be surface mounted or flush mounted • Front turn plates included • Turn plate covers included • Rear slip plates • Extra-long drive up ramps • Hydraulic failure safety devices • Mechanical safety locks • Floor bolts included • Fully C.E. approved • Low voltage control system

80mm

Optional flush mount drive on ramps, for infloor installation

 

180mm

Jacking beam lift pad extensions included





2500kg jacking beam included

£6,200

+ VAT

Air operated safety locks



5T LIFTING

 

Dimensions for on-ground installation

Automotech was established in 1972

Turn plates included

Removable front turn plate covers



ONLY

Our lifts are fitted with a low voltage control system



Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-7430H 3T Low Entry Full Rise Scissor Lift The AS-7430H Full height scissor lift uses a single scissor action to gain full working height.

This makes the lift very stable during raising and lowering operations. The AS-7430H also has the added advantage over other surface mounted scissor lifts in that it is mounted within its own frame. This allows the extra-long drive up ramps, built into the machine to accommodate low riding vehicles. With the built in lifting blocks and end positioning stop this machine is quick to load and operate.

 Quick

and easy to load vehicles onto the lift platforms can be extended to accommodate longer vehicles  End stops makes positioning the vehicle quick and easy  Lift

 Rubber lift pads mounted to platform

Features 3000Kg capacity Extendable Lift Platforms Rubber Lift blocks Included Low voltage control system Low maintenance due to hydraulic design Safety lock in each platform + Hydraulic anti surge valve.

• Floor Bolts Included • Fully C.E. approved • Low voltage control system (as required by regulations) • • • • • •

ONLY

£2,395

+ VAT

Our lifts are fitted with a low voltage control system



3T LIFTING



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Scissor Lifts AS-7135 3.5T Full Rise Scissor Lift

 Drive

up ramps can be locked in the upright position to extend the platform length

This 3.5T capacity low profile scissor lift is surface mounted, there is no need for expensive ground works. An ideal machine when space is tight and full working height is required.

• • • • • • •

Please contact us for information

 Quick

release lock

Features Lifting capacity 3.5T Lifting height 1900mm Minimum height 115mm Extendable lift platforms Hydraulic failure safety devices Low voltage control system Rubber lift blocks included

ONLY

£2,550

+ VAT

X4 rubber sill mounting blocks included



3.5T LIFTING

Twin hydraulically synchronised rams in each platform means a clear and safe working area between the lift



Our lifts are fitted with a low voltage control system

 

Dimensions

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-7230A Scissor Lift This low profile full rise scissor lift is surface mounted, there is no need for expensive ground works. An ideal unit when space is tight.

• • • • •

Features Lifting capacity 3T Lifting height 1900mm Minimum height 112mm Rubber lift blocks included Single or 3 phase option

ONLY

£2,199

+ VAT

X4 rubber sill mounting blocks included



3T

Figure 2 – LAYOUT Figure 2 – LAYOUT

LIFTING

Machine bolts directly to the floor.

No need for expensive ground works



Drive up ramps can be locked in the upright position to extend the platform length



Our lifts are fitted with a low voltage control system



REV. 01

11 / 29

REV. 01

11 / 29

All our new equipment comes with 12 months’ warranty as standard



Dimensions

Specialists in vehicle lifts and garage equipment

Installation service available

Scissor Lifts

Please contact us for information

AS-7335 In Floor Scissor Vehicle lift This full rise scissor lift gives a flush floor finish when lowered. This means that the minimum height is 0mm and a full working height of 1900mm. The installed lift gives a very professional appearance to any workshop.

High quality powder coat paint finish



Features • Lifting capacity 3500Kg • Lifting height 1900mm • Minimum height 0mm • Platform length 1540mm- 1740mm • Platform width 550mm • Rubber lift blocks included • Floor bolts included • Single or 3 phase option

Every pivot point is fully bushed



Floor bolts included



ONLY

£2,399

+ VAT

24V CONTROLS  Our lifts are fitted with a low voltage control system as is required

Rubber sill mounting blocks included



Powerful hydraulic unit, single or 3 phase



3.5T LIFTING



Dimensions

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk

3T

AS-7330 Three Tonne Scissor Lift

LIFTING

In floor, full rise scissor lift gives a flush floor finish when lowered. This means that the minimum height is 0mm. The installed lift gives a very professional appearance to any workshop.

• • • • • •

Lift platforms can be extended for longer vehicles



Features Lift capacity 3T Lift height 1700mm Minimum height 0mm Rubber lift blocks included Pneumatic safety locks 240v single phase or 415v 3 phase

ONLY

£2,099

+ VAT

Figure 2 - LAYOUT



Full height with a clear working area between platforms X4 rubber sill mounting blocks included



Drive on

REV. 02

Our lifts are fitted with a low voltage control system



All our new equipment comes with 12 months’ warranty as standard

10 / 30



Dimensions

Specialists in vehicle lifts and garage equipment

Scissor Lifts AS-7532B 3.2T Mid Rise Scissor Lift

 Drive

A surface mounted low profile mid-rise scissor lift with a minimum height of just 110mm. Its unique design gives a clear working area between platforms. An ideal lift for busy repair shops and tyre bays.

• • • • • • •

DELIVERY FROM AS LITTLE AS £50

up ramps can be locked in the upright position to extend the platform length

 Quick

release lock

Features Lifting capacity 3.2T Lifting height 1000mm Minimum height 110mm Extendable lift platforms Hydraulic failure safety devices Low voltage control system Rubber lift blocks included  Twin hydraulically synchronised rams in each platform means a clear and safe working area between the lift

ONLY

£1,995

+ VAT

X4 rubber sill mounting blocks included



3.2T LIFTING

1460mm 1994mm

Our lifts are fitted with a low voltage control system

860mm

 

Dimensions

Automotech was established in 1972

490mm

Call now: 01889 579945

110mm

Call now: 01889 579945 www.automotechservices.co.uk AS-7530D Mobile Scissor Lift This scissor lift is ideal for tyre shops / body shops, with the advantage of it being totally mobile.

OPTIONAL EXTRA

X4

• • • • • • • •

AS-7530LPR Low Profile Loading Ramps They simply sit on the floor so the existing loading ramps lower onto them. This gives a much shallower approach preventing the vehicle from grounding during loading.

ONLY

£340+VAT 

Features Fully mobile Lifting capacity 3T Extendable platform Lifting height 1000mm Minimum height 110mm Pneumatic safety locks 240V single phase No installation required

ONLY

£1,699

1420mm - 1990mm

+ VAT



860mm

Mobile Wheel Kit Every machine comes with a full mobile kit as standard





110mm

Figure 2 - LAYOUT



490mm

X4 rubber sill mounting blocks included



3T LIFTING



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Mobile Lifts

DELIVERY FROM AS LITTLE AS £50

AS-7630 Mobile Scissor lift This compact mobile scissor lift is ideal for tyre and body shops. A great favorite with DIY and classic car enthusiasts.

• • • • • •

Features Lifting capacity 2.7T Lifting height 1300mm Minimum height 118mm 240v single phase No installation required No air supply required

ONLY

£1,350

+ VAT 

Our lifts are fitted with a low voltage control system

Dimensions





Fully adjustable arms

2.7T LIFTING





Lift pad extensions as standard

Fully mobile

50mm  100mm  150mm  200mm extension extension extension extension

 

Electro / mechanical safety lock

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-5500 2.5 Tonne Scissor Lift The AS-5500 mobile lift has no electrical connection as it is operated with a powerful air / hydraulic pump. A great favorite with DIY and classic car enthusiasts.

• • • • •

Features Lifting capacity 2.5T Lift height 1025mm Minimum height 123mm Pneumatic safety locks Air operated (compressor required 6-7 bar)

ONLY

£890



+ VAT

1025mm max

2.5T Air operated! No electrical supply required

The lift is supplied with a mobile kit as standard



LIFTING



2554mm

1015mm 123mm MIN 293mm

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Storage Lift

DELIVERY FROM AS LITTLE AS £50

AS-7261 Single post Lawnmower / Quad Bike / Motorcycle Storage Lift The platform is simply driven onto and the Vehicle / Machine raised to the required height.

The lift has the added advantage in that the light weight reinforced aluminium section can be removed to gain access to the underside of the Vehicle / Machine. The lift is operated via a powerful hydraulic unit and can be raised to any height between 0mm and 1515mm.

• • • • • • •

Features Lifting capacity 700Kg Lifting height 1515mmmm Minimum height 70mm Platform depth 1250mm Overall Platform width 1626mm Floor bolts included Single phase 240v

Optional motorcycle clamp ONLY

£85+VAT  1515mm

ONLY

£1,299

+ VAT



Dimensions

24V CONTROLS Our lifts are fitted with a low voltage control system 

Removable aluminium centre section



With adaptor



2144mm





1626mm 

Automotech was established in 1972

Call now: 01889 579945

Powerful 240v motor

Specialists in vehicle lifts and garage equipment

Mobile Lifts AS-0901/1 Portable Tilting Lift This mobile lift is ideal for any workshop, mobile mechanic or DIY enthusiast. Lightweight and very portable, no need for any air or power supply.

1550 1185

1530 800

585

Features Lifting capacity 1.5T Lightweight design 58Kg Vehicle can be tilted forwards or backwards Supplied with manual handle Supplied with bracket so that a drill can be used to raise and lower • Lift can be locked at required angle • Lifting height 585mm • Min height 150mm • • • • •

ONLY

£300

+ VAT

1285 150



Dimensions

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Installation service available

Mobile Lifts

Please contact us for information

AS-0901/3 Adjustable Mobile Tilting Lift



Rubber lift pad

This mobile tilting lift is ideal for any workshop, mobile mechanic or DIY enthusiast. Lightweight and very portable. The machine is rolled under the vehicle and is raised by using the mechanical winding handle, no need for any air or power supply. The vehicle is simply tilted forward or backward to the required position. The width is fully adjustable from 775mm – 1530mm.

Features 1500Kg capacity Lightweight design 58Kg Vehicle can be tilted forwards or backwards Supplied with Adjustable width kit 775mm – 1530mm Supplied with manual handle Supplied with bracket so that a drill can be used to raise and lower • Lift can be locked at required angle • Lifting height 585mm • Min height 150mm • • • • • • •

ONLY



£375

m 1285m

+ VAT

Mechanical safety lock





Automotech was established in 1972

775mm - 1530mm

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-1500SL 1.5T Mobile Side Lift This mobile lift is powered by an air operated hydraulic pump and can be easily controlled to raise or lower the vehicle. The perfect machine for mechanical repairs, bodywork and so much more.

Fitted with air/ hydraulic pump



Features • 1.5T capacity (For max vehicle weight 2500kg) • High quality Air / Hydraulic pump.

(No electrical connection required).

• Includes Four quick fit lifting adapters • Very versatile and easy to move • Hydraulic failure safety devices • Mechanical safety device • Fully C.E. approved

Mechanical safety device



ONLY

£820

+ VAT

Includes four quick fit adaptors to lift via wheel or car body





Dimensions

All our new equipment comes with 12 months’ warranty as standard

Motorcycle Lift

Services Ltd

Optional Bed Width Extensions Specialists in vehicle lifts and garage equipment

Mobile Lifts

DELIVERY FROM AS LITTLE AS £50 150mm extensions either side giving a total bed width of 1100mm

AS-7607D Motorcycle Scissor Lift This high quality motocycle lift is the ideal solution for motorcycle servicing and repairs. Its optional side platforms can be added to turn this versatile lift into a quad bike or mini tractor lift.

• • • • • •

Features Retractable drive up ramp Removable rear platform section Front wheel clamp Tool tray Bike tie down brackets 240V hydraulic version

300mm extensions either side giving a total bed width of 1400mm

Unit 6, Oakhurst Park, The Levels, Brereton, Rugeley, Staffordshire, WS15 1RD

Telephone: 01889 579945 Fax: 01889 579350 Email: info@automotechservices.co.uk

OPTIONL EXTRA

www.automotechservices.co.uk

300mm extensions either side giving a total bed width of 1400mm. Ask for details



ONLY

£1,249

+ VAT

240v hydraulic version



Slide away drive on ramp





Dimensions

Automotech was established in 1972

Call now: 01889 579945

Motorcycle Lift

Services Ltd

Optional Bed Width Extensions

Call now: 01889 579945 www.automotechservices.co.uk 150mm extensions either side giving a total bed width of 1100mm

AS-7607DA Motorcycle Scissor Lift 300mm extensions either side giving a total bed width of 1400mm

Unit 6, Oakhurst Park, The Levels, Brereton, Rugeley, Staffordshire, WS15 1RD

Telephone: 01889 579945 Fax: 01889 579350 Email: info@automotechservices.co.uk

OPTIONL EXTRA

This lift is fitted with automatic front wheel clamping. As the technician rides the motorcycle onto the lift the front wheel touches the rear of the front wheel clamp, the clap then automatically clamps the wheel. www.automotechservices.co.uk

300mm extensions either side giving a total bed width of 1400mm. Ask for details



MECHANICAL SAFETY LOCKS

Features • Automatic front wheel clamp • Removable rear platform section • Tool tray • Bike tie down brackets • Mechanical safety locks • Powerful 240v Single Phase hydraulicly operated

ONLY

£1,399

+ VAT

Automatic front wheel clamp (Air supply required) Powerful 240v single phase hydraulic powerpack  Slidable tie down hooks and tool tray supplied  Slide away drive on ramp  Sliding removable wheel bed  Mechanical safety locks 

AUTOMATIC FRONT WHEEL CLAMP



Max.1200/Min.160

Figure 3 – LAYOUT

1735

480 730 2223



Dimensions

All our new equipment comes with 12 months’ warranty as standard

936

535

Specialists in vehicle lifts and garage equipment

Tyre Machines AS-20SA SEMI AUTOMATIC TYRE CHANGER This compact machine is simple to use, with a turntable that will clamp up to 20”rims.

Features • Swing arm / semi automatic style • 10” - 20” rim clamping • Inflation gauge included • Tyre lever included • 240v single phase

ONLY

£640+VAT DELIVERY FROM AS LITTLE AS £35

AS-24SA SEMI AUTOMATIC TYRE CHANGER This Semi automatic machine is compact, simple to use and will handle rims up to 24”. A great value for money machine.

Features • Swing arm / Semi- Automatic style • 10”- 24” Rim clamping • Inflation gauge included • Tyre lever included • Plastic jaw protectors included • 240v Single phase • Motorcycle adapters available Cost £80

ONLY

£740 +VAT

 Includes aluminium wheel protection kit / tyre lever and inflation gauge

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-24FA FULLY-AUTOMATIC TYRE CHANGER This Automatic machine is a tilting back arm design, with a built in jaw bead blaster for seating tyre’s quickly.

Features • Fully-Automatic style • 12”- 24” Rim clamping • Built-in inflation gauge included • Tyre lever included • Plastic jaw protectors included • 240v Single phase • Motorcycle adapters available Cost £80

Includes aluminium wheel protection kit / Tyre lever / Tyre pressing tool



ONLY

£895 +VAT AS-24XFA AUTOMATIC - TYRE CHANGER WITH POWER ASSIST ARM The automatic machine is the same as the AS-24FA but with the addition of a powerful pneumatic assist arm. The air operated bead lifting and pressing device makes tyre mounting and demounting much easier, especially stiff beaded low profile tyres.

Features • Fully Automatic style • Air operated assist arm • 12”- 24” Rim clamping • Built-in inflation gauge included • Built-in jaw bead blaster • Plastic jaw protectors included • 240v Single phase • Motorcycle adapters available Cost £80

ONLY

£1,250+VAT

Includes aluminium wheel protection kit / Tyre lever / Tyre pressing tool



All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Tyre Machines AS-26XFA FULLY AUTOMATIC TYRE MACHINE This machine is capable of handling 12”- 26” wheels. The three way assist arm fitted to the machine makes tyre mounting and demounting very easy.

Features • Fully automatic tilting column • Built in air booster • Pneumatic operated assist arm • 12” – 26” rim clamping • Tyre inflator included • Plastic wheel protector kit included • 240V single phase

ONLY

£1,650+VAT DELIVERY FROM AS LITTLE AS £35

AS-26LXFA FULLY AUTOMATIC “LEVERLESS” TYRE MACHINE The Leverless System dramatically reduces the risk of damage that can occur to the rim and tyre when using conventional tyre levers.

Features • Fully automatic tilting column • Leverless mount / demount system • Pneumatic operated assist arm • 10” - 26” rim clamping • Tyre inflator included • Plastic wheel protector kit included • 240V single phase

ONLY

£1,950 +VAT



Automotech was established in 1972

Plastic wheel protector kit included

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-24XSA SEMI– AUTOMATIC TYRE CHANGER WITH TWIN ASSIST ARMS This compact machine has the advantage of having the twin air operated bead lifting and pressing rams fitted from above. This makes tyre mounting and demounting much easier.

Features • Swing arm / semi automatic • Twin assist arms • 12”-24” rim clamping • Inflation gauge included • Plastic jaw protection covers included • Tyre lever included • 240v single phase

ONLY

£925+VAT

AS-28XSA SEMI AUTOMATIC TYRE CHANGER WITH TWIN ASSIST ARMS Capable of handling rims up to 28” the twin air operated bead lifting and pressing rams make tyre mounting and demounting much easier.

Features • Swing arm/semi automatic • Style with twin assist arms • Inflation gauge • Plastic jaw protection covers • Tyre lever • Water/oil separators • Single phase 240v supply • Motor power 0.75 - 1.1Kw • Max wheel diameter 1143mm/45” • Inner clamping 14” - 28” • Outer clamping 12” - 25” • Bead break force 2500Kg • Net weight 200Kg • 12 month parts warranty • 240v plug in • Package size 1130 x 900 x 1030mm

ONLY

£1,050+VAT

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Tyre Machines AS-24SA/HW24 COMBO 10” - 24” Semi-Automatic Tyre Machine + Hand Spin Wheel Balancer & Stand

MACHINE DIMENSIONS REQUIRED WORKING DIMENSIONS

• • • • •

Specification Inner rim clamping 12”-24” Outer rim clamping 10”-21” Maximum wheel diameter 1040mm/41” Motor 0.75-1.1KW 240v Bead breaking force 2500KG

•

• • • • • • • •



• • • •

AS-24SA Features High quality machine, with a powder coated painted cabinet • Swing arm Semi-Automatic style Inflation gauge included Tyre lever included Air moisture separator / lubricator fitted 240v Single Phase (13A Plug fitted)

180cm  185cm

Compact Tyre machine / Wheel balancer combination for when space is at a premium. This unique design incorporates both machines as one.

AS-HW24 Features Selectable programs, Standard, Aluminium, Static, Dynamic, Motorcycle Easy to operate touch pad design 12Vdc 1Amp (240Vac – 12Vdc adaptor + 12Vdc cigarette lighter adaptor supplied) Callipers, weight pliers included Set of 4 cones included Quick release speed nut supplied.

10”- 24” Rim diameters 1.5”-20” Rim Width

ONLY

£1,250

+ VAT

 

140cm 170cm

 

Automotech was established in 1972

Call now: 01889 579945

100cm 120cm

Call now: 01889 579945 www.automotechservices.co.uk 

14”-26” Rim clamping

AS-26TC Truck Tyre Changing Machine This truck tyre changing machine makes light work of truck, bus and commercial vehicle tyres.

The quick and easy to operate remote control joystick gives the operator the added advantage to work in any position around the machine during its operation. The hydraulic pick up arm and self-centring chuck eliminates any need to manually lift any tyres or wheels. This heavy duty machine is a must for any serious operator.

Features • Hydraulically operated clamping jaws, pick up arm and demount head.

• Electric drive two speed chuck • Powerful 3 phase motors • Simple joystick operation and foot controls • Rim Clamping 14” – 26” • Maximum Wheel Width 780mm • Maximum Wheel Diameter 1600mm • Maximum Wheel Weight 500Kg • Bead Breaker force 2500Kg • Dimensions 2500mm x 2000mm

ONLY

£3,100

+ VAT

Easy to operate 24v controls



All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Wheel Balancers AS-401FA Fully Automatic Wheel Balancer This fully automatic wheel balancer uses automatic data entry for all 4 wheel parameters making it very simple to use. The 10” colour LED monitor ensures a very high quality image and feeds back user information during every step of the balancing procedure, this makes the machine one of the easiest error free balancing machines to use on the market. Using the “S” Drive technology the machine delivers very smooth operation and is able to position the wheel automatically to where the weight is to be applied. This very advanced machine is user friendly and simple to use.



40mm shaft

Easy to operate LED display standard, alloy, dynamic and split weight functions



Features • Automatic data entry for all 4 parameters with audible instructions • 10” Colour LED monitor ensures high quality image and user information • Very high accuracy of imbalance measurement • Easy to operate user friendly interface • Auto breaking and weight positioning • Weight pliers included • Set of 3 cones included • Haweka Quick release speed nut supplied • 10”- 28” Rim diameters • 1.5”-20” Rim Width

ONLY

£1,250

+ VAT

Included: Set of cones, weight pliers and a Haweka quick release speed nut



Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-401A MOTORISED WHEEL BALANCER The AS-401A Automatic wheel balancer is capable of balancing wheels up to 26” in diameter.

The wheel size is entered automatically making the data entry process very quick and simple. This machine is complete and ready to use and is supplied with a set of cones, measuring callipers and weights pliers.

Features • 10” - 26” rim diameter • 1.5” - 20” rim width • Auto spin once hood is lowered • Auto stop / positioning • Set of 4 cones included • Alloy wheel programs • Calipers, weight pliers included • Counter balanced chassis • 240v single phase

Easy to operate touch pad design.

Standard, aluminium, dynamic and split weight functions



Included: Set of cones, measuring callipers, weight pliers and a Haweka quick release speed nut



ONLY

£650+VAT AS-B24 MOTORISED WHEEL BALANCER The AS-B24 wheel balancer is capable of balancing wheels up to 24” in diameter. This is a user friendly machine and very simple to operate. The machine is complete and ready to use and is supplied with a set of four cones, measuring callipers and weights pliers.

Easy to use, user friendly design.

Selectable programs: Standard, Aluminium, Dynamic and Motorcycle



Included: Set of 4 cones, measuring callipers, quick release speed nut and weight pliers



Features • 10” - 24” rim diameter • 1.5” - 20” rim width • Auto spin once hood is lowered • Set of 4 cones included • Alloy wheel programs • Calipers, weight pliers included • 240v single phase

ONLY

£545 +VAT

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Wheel Balancers AS-HB24 HAND SPIN WHEEL BALANCER This floor mounted hand spin wheel balancer is ideal for a workshop or a van when space is tight. This user friendly machine is capable of balancing wheels up to 24” in diameter. The machine is complete and ready to use in minutes. It is supplied with a set of 4 cones, weight pliers and measuring callipers

The ideal machine for the mobile tyre fitter

Features • 10” - 24” rim diameter • 1.5” - 20” rim width • Set of 4 cones included • Alloy wheel programs • Calipers, weight pliers included • 240v single phase



ONLY

£499+VAT

AS-HW24 BENCH MOUNTED HAND SPIN WHEEL BALANCER (12 VOLT DC) The AS-HW24 Hand spin wheel balancer is ultimate solution when space is at a premium. It can be bolted onto an existing workshop bench or into a vehicle. It is then used in the same manner as a floor mounted wheel balancer.

Easy to operate touch pad design.

Standard, aluminium, dynamic and split weight functions



Included: Set of cones, measuring callipers, weight pliers and a Haweka quick release speed nut



Features • Ideal for Mobile vans and workshops • Selectable programs, Standard, Aluminium, Static, Dynamic, Motorcycle • Easy to operate touch pad design • 12Vdc 1Amp (240Vac - 12Vdc adaptor + 12Vdc cigarette lighter adaptor supplied) • Callipers, weight pliers included • Set of 4 cones included • Quick release speed nut supplied.

• 10”- 24” Rim diameters • 1.5”-20” Rim Width

ONLY

£430 +VAT

Automotech was established in 1972

Call now: 01889 579945

Specialists in vehicle lifts and garage equipment

Garage Equipment

AS-B24LC

AS-B24CLA

AS-B24MCA

The large cone adapter enables the AS-B24 range of balancers to handle wheels with a larger than 140mm centre hole.

The adapter enables centre less wheels (Wheels manufactured without a hole in the centre) to be mounted to the AS-B24 range of balancers.

The adapter enables the AS-B24 range of balancers to balance motorcycle wheels.

ONLY

£70+VAT

ONLY

£160+VAT

ONLY

£140+VAT

AS-24MCJ

AS-18AB

The kit enables motorcycle wheels to be mounted on to all Automotech 24” and above tyre machines.

BEAD SEATER The ideal tool for fitting / seating tyres to rims.

ONLY

ONLY

£80+VAT

£118 +VAT

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Garage Equipment

AS-LWA40 Wheel Alignment Gauge

AS-LWA50 Wheel Alignment Gauge

The AS-LWA40 wheel alignment gauge measures the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use.

The AS-LWA50 wheel alignment gauge measures the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use.

Features • Precision laser to indicate toe-in / toe-out • Tough 2.5mm steel construction • Can be used on vehicle lifts • Will work on vehicles with rim diameters 6” - 23” • Battery powered by 2 x AA batteries (included) • Measuring range +/- 3deg • Laser class II

Features • Precision laser to indicate toe-in / toe-out • Can be used on vehicle lifts • Will work on vehicles with rim diameters 8”-24” • Battery powered by 2x AA batteries (included) • Laser beam height 40mm from floor • Measuring range +/-2deg • Laser class II

ONLY

ONLY

£180+VAT

£266.67+VAT

AS-TU40 These fully ball-raced cast iron turn plates will not bend or buckle under load.

Ideal for use with Wheel Alignment / Tracking Gauges or MOT 4 Post Lifts.

Features • Plates come as a pair • Cast iron upper and lower components • Ball bearings fitted for ease of use and precision • Lock off feature (plates can be lock to stop rotation) • Tough powder coat paint finnish

ONLY

£230+VAT

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk

AS-0601-1 Engine / Gear Box Stand The ideal work station when rebuilding units.

Features • Capacity 350Kg • Fully adjustable cradle to accept a wide varity of engines / gearboxes • Head rotates 360 degrees • Steel casters

AS-0104-2 Engine Support Beam The AS-0104-2 Engine support Beam is the essential tool when removing gear boxes / engine supports etc.

Features • Capacity 500Kg • Fully adjustable width 630mm - 1800mm • Fully adjustable support bracket (left, right, up, down) • Rubber mounted feet

ONLY

AS-0601-2 Engine / Gear Box Stand

£32

The ideal work station when rebuilding units.

+VAT

Features • Capacity 450Kg • Fully adjustable cradle to accept a wide varity of engines / gearboxes • Head rotates 360 degrees • Steel casters

ONLY

AS-0301C 1 Tonne Spring Compressor

£75 +VAT

Makes changing shock absorbers quick and easy.

Features • 1T capacity (1000Kg) • For use on spring length 150mm - 500mm • For use on spring diameter 100mm - 175mm • Ram travel 325mm • High speed foot pump

All our new equipment comes with 12 months’ warranty as standard

ONLY

£50 +VAT

ONLY

£104 +VAT

Specialists in vehicle lifts and garage equipment

Garage Equipment

AS-3004A 20T Floor Mounted Press AS-0901F 20T Floor Mounted Press Features • 20T hydraulic pump • Floor mounted • Movable / lockable. Direct push ram (not bottle jack type) • Ram stroke 145mm

ONLY

£245 +VAT

Automotech was established in 1972

Features • 20T capacity 9 piece quick change pressing tool kit included.

10, 12, 16, 18, 20, 22, 25, 30mm • Pressing plates included • Two speed hydraulic pump • Movable direct push ram.

(Ram moves with ease on roller bearings) • High quality powder coating • Multi position bed 0mm - 1030mm • Bed working width 440mm

Call now: 01889 579945

ONLY

£285 +VAT

Call now: 01889 579945 www.automotechservices.co.uk AS-03019 30T Two Stage Hydraulic Floor Mounted Press

 1840mm

This press is fully adjustable and uses roller bearings for easy lateral movement of the direct push ram. The frame components are plasma cut before being welded to give precision and strength.

The two stage hydraulic pump unit gives speed and precision during operation.

 Adjustable

bed height 0-1135mm

 550mm

Features • 30T capacity • Foot or hand operated two stage hydraulic pump • Welded main structure • Reversible pressing plates / V Blocks included • Movable direct push ram (Ram moves with ease on roller bearings) • High quality powder coating • Multi position bed 0mm - 1135mm • Bed working width 550mm

ONLY

£746

+ VAT

 Two stage foot or hand operated hydraulic pump

 790mm

 Rolling hydraulic ram giving 205mm of lateral travel

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Garage Equipment AS-5030 50T Two Stage Hydraulic Floor Mounted Press This press is fully adjustable and uses roller bearings for easy lateral movement of the direct push ram. The main press bed is adjusted by an easy to operate winch, this means the operator does not have to lift and support the press bed during adjustments. The frame components are plasma cut before being welded to give precision and strength. The two stage hydraulic pump unit gives speed and precision during operation.

 Press

bed adjusted with mechanical winch

Features 50T capacity powerful hydraulic two speed pump Foot or hand operated Welded main structure. (Not bolted) Reversible Pressing plates / V Blocks included Movable direct push ram (Ram moves with easy on roller bearings) • Winch operated, Multi position bed 0mm-920mm • Bed width 710mm • High quality powder coated finish

 Adjustable

bed 0-920mm

ONLY

£952 

 710mm

+ VAT

Supplied with reversible pressing plates “V-Blocks”

 Adjustable hydraulic ram  Giving

150mm of lateral travel

Automotech was established in 1972

Call now: 01889 579945

 1950mm

• • • • •

Call now: 01889 579945 www.automotechservices.co.uk

AS-0701D 2T High Position Jack Stand Features • 2T capacity • 1250mm Minimum Height • 2130mm Maximum Height

ONLY

£70 +VAT

AS-0601B 2.0 Tonne Folding Engine Crane

ONLY

Features • Lift capacity 2.0T • Four lift positions 2000Kg, 1500Kg, 1000Kg, 500Kg • Maximum lift height to hook 2340mm • High speed hydraulic pump • Weight 80Kg

£152 +VAT



AS-0101H 0.5T 2 Stage Transmission Jack

AS-0102A 0.6 Tonne Transmission Jack

The jack has a lifting range from 820mm - 1740mm.

With a fully adjustable cradle and tie down chains.

A robust and useful piece of equipment for any workshop.

Features • 0.5T capacity • Fully adjustable cradle • Min height 820mm • Max height 1740mm • Steel casters • High speed hydraulic foot pump • Precision lowering valve

Features • Lift capacity 0.6T • Minimum height 1140 mm • Maximum height 1950mm

ONLY

£95+VAT

Thread extension 135mm

AS-08039 Vehicle Positioning Jack Features • 680Kg capacity (per jack) • Maximum tyre width 300mm • Maximum roller opening 530mm • Minimum roller opening 280mm • High speed hydraulic foot pump • Sold in pairs

ONLY

£150+VAT

ONLY

£145+VAT

All our new equipment comes with 12 months’ warranty as standard

AS-1102B Hydraulic Pipe Bender Solid steel construction with durable powder coat finish.

Features • 16T Powerful Hydraulic Ram • Includes 8pc cast Iron formers. 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” (15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm)

ONLY

£132+VAT

Specialists in vehicle lifts and garage equipment

Garage Equipment 



Max 400mm

Max 295mm

AS-3812 Air Operated Portable Pneumatic Jack Features • 2T capacity • Lightweight design at only 14Kg • Easy to use operating valve • Safety valve as standard • Minimum height: 115mm • Maximum lifting height: 295mm • Overall width: 250mm • Overall length 400mm • Lifting time 3 seconds • Operating pressure 145Psi / 10Bar

AS-1812 Air Operated Portable Pneumatic Trolley Jack Features • 2T capacity • Lightweight design at only 16Kg • Easy to use operating valve • Safety valve as standard • Minimum height: 115mm • Maximum lifting height: 295mm • Overall width: 250mm • Overall length 1050mm • Lifting time 3 seconds • Operating pressure 145Psi / 10Bar

ONLY

£162 +VAT

ONLY

£182 +VAT

Automotech was established in 1972

AS-3813 Air Operated Portable Pneumatic 3 Stage Jack Features • 2T capacity • Lightweight design at only 16Kg • Easy to use operating valve • Safety valve as standard • Minimum height: 150mm • Maximum lifting height: 400mm • Overall width: 250mm • Overall Length 400mm • Lifting Time 3 seconds • Operating Pressure 145Psi / 10Bar

AS-1813 Air Operated Portable Pneumatic Trolley Jack Features • 2T capacity • Lightweight design at only 16Kg • Easy to use operating valve • Safety valve as standard • Minimum height: 150mm • Maximum lifting height: 400mm • Overall width: 250mm • Overall length 1050mm • Lifting time 3 seconds • Operating pressure 145Psi / 10Bar

Call now: 01889 579945

ONLY

£182 +VAT

ONLY

£192 +VAT

Call now: 01889 579945 www.automotechservices.co.uk AS-2000LTJ 2T ULTRA LOW PROFILE TROLLEY JACK This is a heavy duty low profile jack.

A minimum height of 70mm (55mm with rubber pad removed) and a maximum height of 520mm enables this jack to be used on the lowest of vehicles and still gives an impressive lifting height. Its quick approach foot pedal and “D” shaped handle makes this jack quick and easy to operate.

Features • 2T capacity two speed hydraulic pump • Ultra low profile 70mm (55mm with rubber pad removed) • Easy to operate “D” handle • Nylon wheels • Rubber vehicle protection on handle • Magnetic tool tray • Lift height 520mm • Overall length 1000mm

ONLY

£220 +VAT

AS-3000JB 3T Universal Jacking Beam Features • 3000Kg Capacity • 2 Sets of aluminium blocks included • Mechanical safety lock and telescopic finger guard • Flat and raised lip mounting brackets included • Support arm reach 780mm – 1075mm • Beam lift 95mm – 300mm • Load arm reach 850mm -1600mm

AS-2000JB 2T Universal Jacking Beam Features • 2000Kg Capacity • 2 Sets of aluminium blocks included • Mechanical safety lock and telescopic finger guard • Flat and raised lip mounting brackets included • Support arm reach 780mm – 1075mm • Beam lift 95mm – 300mm • Load arm reach 850mm -1600mm

All our new equipment comes with 12 months’ warranty as standard

ONLY

£575 +VAT

ONLY

£495 +VAT

Specialists in vehicle lifts and garage equipment

Garage Equipment AS-80LP Features • Polyethylene 80L reservoir (you can see the oil clearly.

The unit will not rust) • Rotary pump or gravity drain top • Adjustable height • Bowl diameter 440mm • Mobile with coasters

ONLY

£69.59+VAT

AS-36L Features • Polyethylene 36L reservoir (you can see the oil clearly.

The unit will not rust) • Drain bowl with filter • Adjustable height • Max height 1600mm • Bowl diameter 440mm • Mobile with coasters

ONLY

£45.10+VAT

AS-2285 Waste Oil Drainer / Extractor Features • Height adjustable steel drain bowl with filter grid • Detachable extension funnel for drain bowl • Standard oil drain function or vacuum suction drain through dipstick tube • 6pc Suction probes included • BMW, VW,Mercedes adapters included • Reservoir oil level indicator

ONLY

£240 +VAT

Automotech was established in 1972

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-0212B Workshop Cabinet This nine-piece workshop cabinet set is the perfect solution for any workshop or garage.

The modular design gives a vast storage space, with its six cupboards and nine draws. All lockable with magnetic catches and the draws have smooth action ball bearing runners. The professional Modular cabinet set is fabricated from steel and then powder coated for durability.

The cabinet and draws are fully assembled ready for ease of installation..

Features • Large interior giving a vast storage space • Durable powder coated steel, Lacquered solid wooden work top.

• Precisely manufactured giving a very professional appearance • All cabinets and draws have magnetic shutters and key locks • Three removable shelves are included in the tall cabinets and draws lined with anti-slip bases • Each unit has fully adjustable feet for a perfect installation • Cabinets pre-assembled • Requires minimal installation

ONLY

1925mm

£1,180



+ VAT





47 0m m

mm 3300

CONTENTS 2x High cabinets 2x Four draw cabinets  3x Wall cabinets  1x Draw / cabinet combination  1x Worktop   Adjustable

shelves  Lockable doors and draws  Smooth action draw runners  Solid wooden worktop



All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Garage Equipment 

Tough ABS worktop

AS-220A2 Workshop Cabinet With Tools This is a robust 7 draw workshop roll cabinet which is ideal for any workshop or DIY enthusiast.

The tool cabinet comes with lockable draws which also latch in place when closed. Five of the draws come fully loaded with a wide range of tools. Each draw is fitted with ball bearing runners for smooth operation. The steel and ABS construction make this cabinets a very hard wearing durable unit.

Features • Steel and ABS construction with powder coat paint finish • Lockable smooth running draw slides • Steerable wheels with break • 220pcs Tool kit included Specification • Tool Cabinet 965mm H x 470mm D x 670mm W • 5 Draws 545mm W x 390mm D x 60mm H • 2 Draws 545mm W x 390mm D x 120mm H • 220 Piece tool set



ONLY

£380

+ VAT



Wheel break

Automotech was established in 1972

Call now: 01889 579945

Lockable draws

Call now: 01889 579945 www.automotechservices.co.uk



220 pcs tool set (see detailed tools included list)



Ball bearing drawer runners

All our new equipment comes with 12 months’ warranty as standard

Specialists in vehicle lifts and garage equipment

Garage Equipment AS-530 Piston Air Compressor This Piston Air Compressor is our mobile unit which boasts a large 200 Litre Receiver. It is fitted with a high quality reliable pump unit which uses cast iron cylinders and an oil based sump. This unit is powered via a 240v motor which is fitted with a standard 13A plug. The Receiver is fitted with a pressure regulator as standard and ½” BSP outlets if required.

Features • Manufactured in Europe • 200 Litre Receiver Tank • 13.3cfm (395L/min) Capacity • 3Hp 2.2Kw 240v Single Phase Motor (Fitted with a 13A plug) • Regulator fitted complete with quick release couplings • Maximum Pressure 8 bar (120psi) • Receiver fitted with ½”BSP threaded outlets

ONLY

£510



Cast iron cylinder



Oil lubricated pump



Powerful 3 phase motor

+ VAT

AS-550 Piston Air Compressor This Piston Air Compressor boasts a large 200 Litre Receiver. It is fitted with a high quality reliable pump unit which uses cast iron cylinders and an oil based sump. This unit is powered via a powerful 3 Phase 4Hp motor and the Receiver is fitted with ½” BSP outlets as standard.

Features • Manufactured in Europe • 200 Litre Receiver Tank • 18.0cfm (514L/min) Capacity • 4Hp 3.0Kw - Three Phase Motor • Maximum Pressure 10 bar (145psi) • Receiver fitted with ½”BSP threaded outlets.



Cast iron cylinder



Oil lubricated pump



Powerful 3 phase motor

Automotech was established in 1972

ONLY

£700

+ VAT

Call now: 01889 579945

Call now: 01889 579945 www.automotechservices.co.uk AS-610V Piston Air Compressor This Piston Air Compressor boasts a large 270 Litre Receiver. The receiver is mounted vertically as this gives huge space saving when space is at a premium. The unit is fitted with a high quality reliable pump unit which uses cast iron cylinders and an oil based sump. This unit is powered via a powerful 3 Phase 5.5Hp motor and the Receiver is fitted with 3/4” BSP outlets as standard.

Features • Manufactured in Europe • 270 Litre Receiver Tank • 23cfm (653L/min) Capacity • 5.5Hp 4.0Kw – Three Phase Motor • Maximum Pressure 10 bar (145psi) • Receiver fitted with 3/4”BSP threaded outlets

1680mm

ONLY

£950

+ VAT



Cast iron cylinder 

Oil lubricated pump 

All our new equipment comes with 12 months’ warranty as standard

Powerful 3 phase motor

Vist the website

Automotech Services Ltd Tel: 01889 579945 Fax: 01889 579350 Email: info@automotechservices.co.uk Website: www.automotechservices.co.uk

Unit 6, Oakhurst Park, The Levels, Brereton, Rugeley, Staffordshire, WS15 1RD

Prices effective from 1st February 2022. Prices and products are subject to change without notice. All prices exclude VAT and delivery