Xbox 360 Repair - Three Thermal Paste Application Tips

Xbox 360 Repair - Three Thermal Paste Application Tips

Bad thermal adhesive is among the most frequent causes of cpu thermal paste overheating and the red ring of passing. This sometimes happens if the glue is applied during fabrication of this console. Bad paste may also lead to exposure to heat over lengthy time intervals. Since the glue gradually breaks down, you will begin to encounter an overheating issue that gradually dissipates over time. If the glue fails fast, this will lead to an almost instantaneous two reddish light mistake within minutes of turning in your Xbox.

Whether you should make an effort to replace the thermal paste in your own is dependent upon whether you want to create use of your guarantee. If you have never opened your games console earlier, then using your guarantee to have the problem fixed by Microsoft is the very best alternative.

Just do not forget that after you do start the console, your guarantee will be voided.

It always helps if you comprehend why you're doing something, so bit of concept will be discussed.

When the glue breaks , it functions as a barrier to heat as opposed to a bridge. In other words, the heat sink won't have the ability to perform the task of drawing heat out of the GPU.

1.) Implementing new paste along with this older does not do anything since the old glue will still block appropriate heat transfer. The old glue can be removed by employing rubbing alcohol with a sterile cloth. The surface ought to be shiny once you're finished. It's pointless to wash only one of both mating surfaces. After cleansing, never touch the surfaces together with your fingers since this may leave oil in the shape of a finger printing.

2.) Always apply the glue in a thin coating. The thinner it's, the better it will operate. Just be certain that the whole surface is coated. You will learn this when you cannot observe any of those shiny metal. A fantastic guideline would be to use a dab of glue concerning the size of a BB.

3.) This also provides you more control than attempting to do this using a stick.