Welcome
GENERAL INFORMATION
Final Program Content
Executive
Wednesday Schedule ............................................................................................... page 13-14
Registration/Information Hours
La Salle Ballroom Foyer, 3rd Floor
Sunday, February 16 Noon – 5:00 p.m.
Monday, February 17 7:00 a.m. – 5:00 p.m. Tuesday, February 18 7:00 a.m. – 5:00 p.m.
EXECUTIVE COMMITTEE
President
Nick Shephard
Dow Chemical Company
Immediate Past President
Joelle Frechette
University of California, Berkeley
Vice President
Kevin Turner
University of Pennsylvania
Secretary
Katharine Jensen
Williams College
Treasurer Chris Campbell
3M Company
Editor
Andrew Croll
North Dakota State University
Please recycle this program when done.
Members at Large
Anne Dussaud, Momentive
Jonathan Pham, University of Cincinnati
Megan Valentine, University of California, Santa Barbara
Bioadhesion Division Chair
Alex Nyarko, Avery Dennison
Structural Adhesives Division Chair
Joann Hilman, Brighton Science
Soft Adhesives Division Chair
Gabrial Sanoja Lopez, University of Texas at Austin
Home Office Manager/Onsite Contact
Malinda Armstrong, CMP, Adhesion Society
2025 Program Chairs
Chelsea Davis, University of Delaware (Chair)
Christopher So, Naval Research Laboratory (Co-Chair)
La Salle Ballroom BC (Sunday during Presidents Reception) Pelican Foyer (Monday-Tuesday)
2025 EXHIBITORS
Sunday, February 16
Daily Program Schedule
Noon to 5:00 p.m. Registration
La Salle Ballroom Foyer, 3rd Floor
Monday, February 17
1:30 to 4:45 p.m.
sponsored by:
2025 Award for Excellence in Adhesion Science Symposium
Honoring Anil Bhowmick, University of Houston
Session Chair: Mousumi De Sarkar, DENKA Corporation
La Salle Ballroom A, 3rd Floor
1:30 p.m. Introductory Remarks
Nick Shephard, Dow Chemical Company & Mousumi De Sarkar, DENKA Corporation
1:40 p.m. Challenges and Opportunities in Engineering Adhesion
Namita Roy Choudhury, RMIT University
2:20 p.m. Intrinsically Non-combustible Elastomeric Benzoxazine Resins with Very High Char Yield for Adhesive and Coating Applications
Hatsuo Ishida, Case Western Reserve University
3:00 p.m. AWARD PRESENTATION: Adhesion Aspects in Rubber and Rubber Products
Anil Bhowmick, University of Houston & 2025 Award of Excellence Recipient
4:00 p.m. BREAK
4:15 p.m. Designing Hydrogen-Bonding Additives and Optimizing Surface Treatments to Improve Underwater Adhesion Durability and Composites
5:00 – 6:15 p.m.
6:30 – 8:30 p.m.
Ngon Tran, DEVCOM Army Research Laboratory & Early Career Scientist Award Recipient
Business Meeting, Daniel R. King Memorial Scholarship
Recipients & Distinguished Paper Award
La Salle Ballroom A, 3rd Floor
Presidents Reception & Exhibition
La Salle Ballroom BC, 3rd Floor
Please take a moment to welcome our exhibitors during the reception.
• ASI Magazine
• Brighton Science
• DataPhysics Instruments USA Corp.
7:00 a.m. – 5:00 p.m. Registration
La Salle Ballroom Foyer, 3rd Floor
7:00 a.m. – 5:00 p.m. Exhibition
La Salle Ballroom Foyer, 3rd Floor
• Part Consulting LLC
• Photron USA, Inc.
• Psylotech Inc.
7:00 – 7:45 a.m.
Networking Continental Breakfast
La Salle Ballroom BC, 3rd Floor
8:00 – 8:45 a.m. Plenary Talk I: The Interphase in Nanostructured Polymers: Coupled Experiment-Computational Approach and Machine Learning for Interphase Design
Catherine Brinson, Duke University
Session Chair: Chelsea Davis, University of Delaware
La Salle Ballroom A, 3rd Floor
Please take a moment to welcome our exhibitors.
• ASI Magazine
• Brighton Science
• DataPhysics Instruments USA Corp.
• Part Consulting LLC
• Photron USA, Inc.
• Psylotech Inc.
Monday AM Session
9:00 to 9:25 a.m.
Underwater and Bio-sourced
Pelican Room I, 3rd Floor
Session Chairs: Mark Kozlowski, DEVCOM Army Research Laboratory & Bruce Lee, Michigan Technological University
Adhesion of Liquid Metal Composites for Nextgeneration Soft Electronics
Brittan Wilcox, Virginia Tech
9:25 to 9:50 a.m.
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
10:45 to 11:10 a.m.
Bap1 Adhesion Peptide Mediates Robust Stickiness in Physiological Environments
Roberto Andresen Eguiluz, University of California Merced
Biopolymers and Biomimetic Protein-based Adhesives for Wet and Dynamic Surfaces
Naba Dutta, RMIT University
11:10 to 11:25 a.m.
Complex Hierarchical Surfaces for Bioinspired Water Capture Using Principles of Photopolymerization
Induced Phase Separation, Interfacial Energy, and Surface Wrinkling
Sabrina Curley, Michigan State University
Controlling the Free-radical Scavenging Effects of Catechol Moieties in the Application of Dental Adhesion
Denghao Fu, Michigan State University
11:25 to 11:40 a.m.
Facile Network Formation and Strong Adhesion of Catechol Functionalized Triblock Copolymers
Fahed Albreiki, University of California, Los Angeles
Fracture Mechanics I
Pelican Room II, 3rd Floor
Session Chairs: Arit Das, Oak Ridge National Laboratory & Gabriela Moreira Lana, University of Massachusetts Amherst
The Poker-chip Experiments of Natural and Synthetic Rubber Explained
Farhad Kamarei, University of Illinois UrbanaChampaign
Steady State Viscoelastic Crack Growth in a Pure Shear Sample
Chung-Yuen Hui, Cornell University
Connecting Time-Temperature Superposition to Nonlinear Viscoelastic Fracture
Alex Arzoumanidis, Psylotech, Inc.
Fractographic Analysis of Soft Cut Surfaces
Srividhya Sridhar, University of Illinois, Urbana Champaign
Why Cutting Elastomers is Easier Than Tearing?
Donghao Zhao, ESPCI Paris, PSL University
How Gel Architecture Controls Ductility and Dissipation in Fibrous Double Networks
Processing-Structure-Property Relationships of Solids-Filled Thermosets for Additive Manufacturing
11:40 to 11:55 a.m.
Rose Tchuenkam, Georgetown University
Ray Peterson, Virginia Tech
Gels, Elastomers, and Hybrids I
Poydras Room, 3rd Floor
Session Chair: Ruobing Bai, Northeastern University
Unraveling the Complex Structure-mechanics Relationships of PEGDA Hydrogels
Megan Valentine, University of California, Santa Barbara
Controlling the Local Compliances of Cruciform Samples to Probe Biaxial Failure of Soft Materials
Christopher Barney, University of Akron
Mechano-chemical Sensing in Hydrogels and the Impact of Polymer Network Heterogeneities
Lidya Gebremeskel, University of California, Berkeley
KEYNOTE
New Insights into an Old Problem: Cavitation and Delamination Near Rigid Spherical Inclusions
Tal Cohen, Massachusetts Institute of Technology
Rheology and Adhesion of Soft Solid/ Liquid Composites
Christophe Poulard, Université Paris-Saclay
Adhesion Chemistry, Additives, and Synthesis
Fulton Room, 3rd Floor
Session Chairs: Tim Fornes, Parker & Tom Bekemeier, Dow Chemical Company
Weaker To Be Tougher: Adding Breakable Bonds to Adhesives for Enhancing Performance
Jonathan Wilker, Purdue University
KEYNOTE
Glassy Gels with Unusual Adhesion
Michael Dickey, North Carolina State University
Toughening Electronic Adhesives by Kinetically Controlled Selective Network Formation
Brad Tuft, Dow Chemical Company
Tools and Methods for Characterization
Acadian Rooms I & II, 3rd Floor
Session Chair: Naomi Deneke, National Institute of Standards and Technology
Direct Measurement of Molecular Contact Area Using Sum Frequency Generation Spectroscopy
Utkarsh Patil, University of Akron
Development and Validation of Full-Field Indentation Microscopy for Anisotropic Materials
Callan Luetkemeyer, University of Illinois Urbana-Champaign
Comparing a Portable Contact Angle Goniometer Vs. a Lab-style Research Goniometer for Wettability and Surface Energy Results on Various Substrates
Paul Simutis, DataPhysics Instruments USA
Analytical Methods for Understanding the Distribution and Reaction of Adhesion Promoters in Silicone Elastomers
Jeremy Beebe, Dow Chemical Company
Voltage Activated Adhesives: Current and Future Prospectives
Terry Steele, Nanyang Technological Society
Contaminant Removal by Applying Strain-Release Cycles Facilitated by Auxetic Skeletal Structure in Transparent Organogel Shield
Hyun-Joong Chung, University of Alberta
Fabrication of Lubricant-Infused Thick Porous Organogels for Transparent and Durable Self-Cleaning Coatings
Zhitong Lin, University of Alberta
UV Curable Silicones
Junying Liu, Dow Chemical Company
Generalized Adhesion Performance of PSA Tapes Independent of Their Thickness
Kosuke Takahashi, Hokkaido University, Japan
Investigation of a Method for Estimating the Durability of Single Lap Joints Using Deep Learning
Kazumasa Shimamoto, National Institute of Advanced Industrial Science and Technology (AIST)
Visualizing Stress of a Confined Elastomer in Contact with a Rigid Body
Angie Rojas Cardenas, University of Delaware
Quantification of Residual Stresses in Sealants
Adrian Rylski, Dow Chemical Company
Noon to 1:15 p.m.
Lunch on Your Own –Enjoy New Orleans!
Bioadhesives
Division Meeting
Pete’s, 1st Floor
Soft Adhesives
Division Meeting
Frenchmen Room I, 2nd Floor
Structural Adhesives
Division Meeting
Frenchmen II, 2nd Floor
Monday PM Session
1:30 to 1:55 p.m.
Peebles Student Award Session
La Salle Ballroom A, 3rd Floor
Session Chair: Nick Shephard, Dow Chemical Company & Eric Silverberg, Henkel
Unraveling the Coupling between Viscoelasticity and Molecular Damage in Soft Adhesives
Anthony Arrowood, University of Texas at Austin
1:55 to 2:20 p.m.
2:20 to 2:45 p.m.
Modulating Adhesion by Patterning Planar Alignment of Liquid Crystalline Elastomers
Paula Pranda, University of Colorado Boulder
Art and Nature Inspire Mechanical Design for Switchable Adhesives
Chanhong Lee, Virginia Tech
2:45 to 3:10 p.m.
Stress Visualization in Fiber Reinforced Polymer Composites via Mechanophores Nazmul Haque, Purdue University
3:10 to 3:35 p.m. BREAK
3:35 to 4:00 p.m.
4:00 to 4:25 p.m.
Quasi-Complex Coacervates As Sustainable Construction Resins
Jialin She, Institut Charles Sadron and Saint-Gobain Recherche
Mechanical Behavior of UV-Cured Composite Stepped Lap Adhesive Joints
Shagata Das, University of Delaware
4:25 to 4:50 p.m.
Peeling an Architected Interface: Roles of Softness and Fractocohesive Length in Adhesion Toughening
Zumrat Usmanova, Northeastern University
5:30 to 8:30 p.m.
Poster Session & Reception
La Salle Ballroom BC, 3rd Floor
Chair: Melika Farzam, Avery Dennison
1. Automated Numerical Experiments for Identifying SelfAssembling Polymers with High Mechanical Strength and Toughness
William Ferguson, Carnegie Mellon University
2. Specimen Preparation Considerations for the Ice Adhesion
Peel Test
Max Friedman, US Army
3. In-Situ Interfacial and Bulk Damages with Mechanochemical Visualization in Composite Materials
Anna Freund, University of Delaware
4. Peeling of Contaminated Tapes
Naomi Deneke, National Institute of Standards and Technology
5. Marangoni-Driven Surface Fracture on Milk-Air Interfaces
Justyn Friedler, Williams College
6. Brightfield Imaging of High-speed Adhesive Contact Dynamics
Jiwoo Han, Williams College
7. Utilizing a Tunable Dual-cross-linked Gel System to Control Surface Topography
Surbhi Punhani-Schillinger, Michigan State University
8. Two-Component Polyurethane Metal Coatings with Silicone Polymer Polyol (SiPP) for Improved Adhesion and Durability
Stephanie Hughes, Dow Chemical Company
9. Remediation of Silicone-based Pressure Sensitive Adhesive Residues
Abigail Blanco, Brighton Science
10. Strong, Reversible, Heat-Activated Adhesion from Liquid Crystal Polymer Networks
Mazin Osman Saad Adlan, Cambridge Smart Plastics
11. Deadhesion of PSA on PET in Caustic Environment
Rebecca Wheeler, University of California Berkeley
12. Electro-adhesive Performance of Double Network Hydrogels based on Acrylamide and Sodium Alginate
Shima Jalali, University of Alberta
13. Unveiling the Role of Compositional Drifts on the Tack of Pressure- Sensitive-Adhesives
Anthony Arrowood, University of Texas at Austin
14. Impact of Interfacial Defects on Bioinspired Adhesive Performance
Luis Vasquez, California State University Northridge
Poster Sessions
15. Characterizing Creep of BEVA-like Adhesives for Assessing Potential Durability in Art Conservation Applications
Aidan Miller, Virginia Tech
16. Ultrasound as a Tool for Modulating Surface Interaction Forces in Lipid Bilayer
Nahid Hassanpour, Université de Montréal
17. Formulation of Catechol-containing Adhesives for Industrial-scale Applications
Cindy Atencio-Martinez, Purdue University
18. The Adhesion of Silicone Elastomer Nanocomposites at Small Scales
Masoumeh Nazem Salimi, North Dakota State University
19. Adhesion of Oil-Filled PDMS Elastomers
Andrew Croll, North Dakota State University
20. Eggless Vegan Food Emulsions
Nadia Nikolova, University of Illinois Chicago
21. Investigating the Role of Phase Segregation and Thermal Conductivity in Polyurethane Thermally Conductive Adhesives
Raymond Quiroz, PPG Industries
22. Fractographic Analysis of Soft Cut Surfaces
Srividhya Sridhar, University of Illinois
23. 3D Characterization of LM-elastomer Composites with Rheologically Tuned Droplet Sizes
Hugh Grennan, Virginia Tech
24. Spreading Dynamics of Transiently Crosslinked Polydimethylsiloxane Drops
Kyujin Ko, University of Cincinnati
25. Soy Protein Derived Hardener for Structural Epoxy Adhesives
Alyssa Kuang, John Cooper School
26. Liquid Metal Thermoplastic Composites as Conductive Adhesives for E-Textiles
John Joyce, Virginia Tech
27. Octopus-inspired Adhesives for Rapidly Switchable Underwater Adhesion
Chang Oh, Virginia Tech
28. Exploring Combined Tension and Torsion for Elastomers: Mapping Failure Stress in the Second Quadrant of Principal Stress Space
Majed Saadawi, University of Akron
29. Liquid Leaks: Dripping Versus Evaporation
Chuck Extrand, University of Minnesota
30. Flame Retardant Hot Melt Adhesives
Boran Zhao, HB Fuller
31. Modulating Adhesion by Patterning Planar Alignment of Liquid Crystalline Elastomers
Paula A. Pranda, University of Colorado Boulder
Sponsors
ANNUAL MEETING SPONSORS
A special “THANK
YOU”
to our generous sponsors:
• Adhesion Society Award for Excellence in Adhesion Science sponsored by 3M Company
• The Robert L. Patrick Fellowship Award sponsored by The Adhesion Society
• Alan Gent Distinguished Student Paper Award sponsored by Henkel Corporation
• Distinguished Paper Award sponsored by Henkel Corporation
• Best Poster Award sponsored by Avery Dennison
• Adhesion Society Early Career Scientist Award sponsored by the Adhesive & Sealant Council
• Adhesion Society Student Travel Award sponsored by Franklin International
• Peebles Awards for Graduate Student Research in Adhesion Science sponsored by The Adhesion Society
• 2024 Media Partner
Daily Program Schedule
Tuesday, February 18 6:00 – 7:00 a.m. 5K Run
Attendees should meet in the lobby at 5:45 a.m. Maps will be provided.
7:00 a.m. – 5:00 p.m. Registration
La Salle Ballroom Foyer, 3rd Floor
7:00 – 7:45 a.m. Networking Continental Breakfast
La Salle Ballroom BC, 3rd Floor
sponsored by:
8:00 – 8:45 a.m. Plenary Talk II: What Does Sustainability Mean in the Era of Plastic Pollution?
Kathryn Beers, National Institute of Standards and Technology
Session Chair: Chelsea Davis, University of Delaware
La Salle Ballroom A, 3rd Floor
8:45 – 9:00 a.m. Larry Peebles Award Presentation
Early Career Scientist Award Presentation
Alan Gent Distinguished Student Paper Award Presentation
Best Poster Award Presentation
La Salle Ballroom A, 3rd Floor
7:00 a.m. – 5:00 p.m. Exhibition
La Salle Ballroom Foyer, 3rd Floor
Please take a moment to welcome our exhibitors.
• ASI Magazine
• Brighton Science
• DataPhysics Instruments USA Corp.
• Part Consulting LLC
• Photron USA, Inc.
• Psylotech Inc.
Tuesday AM Session
Sustainability in Adhesion I
Pelican Room I, 3rd Floor
Session Chairs: Francisco Cedano, Saint Gobain & Alex
Nyarko, Avery Dennison
Understanding Adhesion Mechanism of Packaging
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
Hot Melt Adhesives on Various Paper Substrates
Yue Deng, Dow Chemical Company
Architected Dual-Network Solvent-free Adhesives for Stretchable Fabrics
Gabriela Moreira Lana, University of Massachusetts Amherst
Adhesives in Transportation, E-Vehicles, and Aerospace
Pelican Room II, 3rd Floor
Session Chair: Terry Steele, Nanyang Technological Society
Electro-adhesion Based on Bottlebrush Polymers
Hao Dong, University of California, Santa Barbara
KEYNOTE
Circular Structural Adhesives from Plastic Waste
Tomonori Saito, Oak Ridge National Laboratory
9:50 to 10:15 a.m.
Small-scale Roughness Entraps Water and Controls
Underwater Adhesion
Ali Dhinojwala, University of Akron
10:15 to 10:45 a.m. BREAK
10:45 to 11:10 a.m.
11:10 to 11:25 a.m.
Modeling the Molecular Mechanisms of Self-healing in Precisely Sequenced Thermoplastic Elastomers
Thomas O’Connor, Carnegie Mellon University
Designed Polyurethane Detachable Lamination Adhesives
Amy Song, Dow Chemical Company
KEYNOTE
11:25 to 11:40 a.m.
11:40 to 11:55 a.m.
Noon to 1:30 p.m.
Noon to 1:30 p.m.
Engineering Aliphatic Polyester Block Copolymer Blends for Hydrolytically Degradable Pressure Sensitive Adhesives
Chris Ellison, University of Minnesota
Enhanced Surface Adhesion and Interfacial Bonding of Adherends and Adhesives by Plasma Treatment for the Adhesively Bonded Dissimilar Joints
Yongsoon Shin, Pacific Northwest National Laboratory
BREAK
Pre-bond and Post-bond Humidity on Plasmatreated Metal-composite Dissimilar Adhesive Joints
Yao Qiao, Pacific Northwest National Laboratory
Surface Preparation for Bonding Thermoplastic Composites
Joann Hilman, Brighton Science
The Effect of Accelerators for DICY on the Performance of Low-temperature Cure Structural Adhesives
Ming-Siao Hsiao, Sunstar Engineering Americas
Two-component Fire Retardant Structural Polyurethane Adhesive for Bonding Thermoplastics and Metals for EV Battery Box/Electric Vehicles
James Puthussery, Bostik
Contact Mechanics
Poydras Room, 3rd Floor
Session Chair: Jamie Booth, California State University, Northridge
Decoupling Adhesion and Viscoelasticity on the Human Perception of Stickiness
Charles Dhong, University of Delaware
Design with Adhesives
Fulton Room, 3rd Floor
Session Chairs: Edoardo Nicoli, Dow Chemical Company & Yimin Yao, Virginia Tech
A Novel Approach for Applying 2K Adhesives to Improve Outcomes and Reduce Cost
Michael Bonner, Saint Clair Systems Inc.
Pressure Sensitive Adhesives
Acadian Rooms I & II, 3rd Floor
Session Chair: Dohgyu Hwang, Dow Chemical Company
Rate Dependence in the Fracture of PSAs
Evan Breedlove, 3M Company
Effect of Surface Stress on Roughness and Adhesion of Soft Solids
Preetika Karnal, Lehigh University
Impact of Nanometer-thin Stiff Layer on Adhesion to Rough Surfaces
Shubhendu Kumar, University of Akron
Highly Reliable Adhesion Structure Combination with Epoxy Adhesive and Monolith Sheet
Yoshiyuki Kamo, Mitsubishi Electric Corp.
Mapping Adhesion Promoter Performance with High-Throughput Methodologies
Tom Bekemeier, Dow Chemical Company
Advanced Design and Controlled Debonding of Vitrimer-based PressureSensitive Adhesives: Characterization and Insights into Shear Behaviour
Victoria Aguilar, ESPCI Paris
Interfacial Fatigue Fracture of Pressure Sensitive Adhesives
Yichen Wan, Northeastern University
How Adhesion Contributes to Transition from Elasto‐hydrodynamic Lubrication (EHL) to Mixed Lubrication (ML) Regime
Xuemei Xiao, Cornell University
Analyzing Effects of Interfacial Defects on Strength of Adhesive Contacts
Coby Jones, California State University Northridge
Spontaneous Rolling of Blistered Thin Film Generates Heterogeneous Adhesion on Ultrasoft Solids
Amit Pandey, Syracuse University
Influence of Pre-Stretch on Planar Indentation of Elastomers: Insights from Experiments and Theory
Yue (Luna) Zheng, Drexel University
The Single Edge Notch Fracture Test for Viscoelastic Elastomers
Oscar Lopez-Pamies, University of Illinois at Urbana-Champaign
Linear Viscoelasticity is a Good Assumption for PSAs: A Modeling Validation Study
Evan Breedlove, 3M Company
FEA-assisted Materials Space Mapping for Adhesion
Hyunki Kim, 3M Company
Laponite Mediated 3D Printable Tough Hydrogels with Colorimetric pH Sensitivity
Ozge Akca Zengin, University of Alberta
Tuning High-speed Peel Forces of Silicone Release Coating
Deepti Kannan, University of Minnesota
Twin Cities
The Right Modulus for Viscoelastic Adhesives
Chao Chen, 3M Company
The Great Peel-Off: Unraveling the Mystery of Drying-Induced Fracturing in PEG-based Hydrogels
Samira Khan, University of Chicago
Spontaneous Rolling of Blistered Thin Film Generates Heterogeneous Adhesion on Ultrasoft Solids
Amit Pandey, Syracuse University
1:30 to 2:15 p.m.
Tuesday PM Sessions
CAREER PANEL – La Salle Ballroom A, 3rd Floor • Chair: Christopher So, Naval Research Laboratory
Sustainability in Adhesion II
Pelican Room I, 3rd Floor
Session Chair: Heather Liddell, Purdue University
2:30 to 2:55 p.m.
2:55 to 3:20 p.m.
Enhancing Durability under High Temperature and Humidity by Laser Surface Treatment for Adhesive
Bonding
Shin Horiuchi, AIST
Tough Reversible Adhesive from Plastic Waste
Dr. Anisur Rahman, Oak Ridge National Laboratory
3:20 to 3:45 p.m.
3:45 to 4:10 p.m.
4:10 to 4:35 p.m.
Effect of Novel Compatibilizer on Interfacial Adhesion in Polyolefin Mixtures
Katherine Evans, National Institute of Standards and Technology
Fracture Mechanics II
Pelican Room II, 3rd Floor
Session Chairs: Yao Qiao, Pacific Northwest National Laboratory (PNNL) & Yue (Luna) Zheng, Drexel University
Normal and Shear Interactions Between Bilayer Graphene and Sapphire
Kenneth Liechti, University of Texas at Austin
Dual Actuator Rotation-controlled Loading for Determining Mixedmode Interactions Between Beams
Mohammad Ansari, University of Texas Austin
Biomedical Adhesion
Poydras Room, 3rd Floor
Session Chairs: Denghao Fu, Michigan State University & Zach Lamberty, U. S.Naval Research Laboratory
Catechol-Containing Nanoparticles as a New Hemostatic Agent with Antimicrobial Properties
Bruce Lee, Michigan Technological University
Electrically Sticking Hydrogels to Tissues: A Suture-less Alternative for Surgical Repairs
Morine Nader, University of Maryland College Park
e-GLUE: Electroadhesive Hydrogel Interface for Prolonged Mucosal Theranostics
Binbin Ying, Massachusetts Institute of Technology
4:35 to 5:00 p.m.
Understanding the Tradeoff Between Reprocessability and Mechanical Strength in Silicones
Anisha Sharma, Northwestern University
KEYNOTE
Scalable Design of Sustainable Pressure-Sensitive Adhesives
Christopher Bates, University of California Santa Barbara
Re-bondable Bio-base Structural Adhesive
Evaluating Differences Between Mode I LEFM and J-Integral Methods
Christopher Jackson, Virginia Tech
Atmosphere Activated Bioadhesive Designs
Terry Steele, Nanyang Technological Society
Role of Frictional Instabilities on Fine Touch Perception
Maryanne Derkaloustian, University of Delaware
5:00 to 5:30 p.m.
5:30 to 7:00 p.m.
7:00 to 8:30 p.m.
Nao Terasaki, National Institute of Advanced Industrial Science & Technology (AIST)
Engineering the Toughness of Architected Interfaces Through Disorder
Kevin Turner, University of Pennsylvania
Women’s Networking Reception – Treme & Marigny, 2nd Floor • Chair: Gabriela Moreira Lana, University of Massachusetts
Gels, Elastomers, and Hybrids II
Fulton Room, 3rd Floor
Session Chair: Hyunki Kim, 3M Company
Soft But Tough Single-network Gels Based on Deep Eutectic Solvents
Mehdi Vahdati, CNRS Institut Charles Sadron
The Importance of Shear Waves in Controlling the Impact Mitigation of Thermoplastic Elastomers
Edwin Chan, NIST
How Do RDRPs Impact the Architecture and Fracture Properties of Polymer Networks? Insights from Mechanochemistry
Gabriel Sanoja, University of Texas at Austin
Elastocapillarity and Wetting
Acadian Room I & II, 3rd Floor
Session Chair: Katharine Jensen, Williams College
Surface Tension of Very Small Liquid Drops
Chuck Extrand, University of Minnesota
KEYNOTE
Engineering Stickiness, Stringiness and Yield Stress of Macromolecular Formulations
Vivek Sharma, University of Illinois Chicago
Rheology and Dispensing of Real and Vegan Mayo: The Chickpea or Egg Problem
Nadia Nikolova, University of Illinois Chicago
Reversible Adhesion I
La Salle Ballroom A, 3rd Floor
Session Chair: Evan Breedlove, 3M Company
Soft Shells with Artificial Defects for Robust Manipulation
Yanbing Tang, Syracuse University
Metamaterial Adhesives for Programmable Adhesion
Michael Bartlett, Virginia Tech
Design of Innovative Bio-based Hydrogels: From Itaconic Acid to High-performance Materials
Hiam Abou Khachfe, ESPCI
Designing Photo-switchable Gel Interfaces by Coupling PEG Chemistry with Coumarin Functionality
Alyssa VanZanten, Michigan State University
Enabling Multicycle Adhesion by Selfhealing Polymer Design
Tomonori Saito, Oak Ridge National Laboratory
of Massachusetts Amherst
Capillary Adhesion of a Microparticle on Ultra-thin Liquid Films
Jonathan Pham, University of Cincinnati
Understanding Tunable Dry Adhesion Mechanics in Soft Hollow Structures for Robotic Manipulation
Wanliang Shan, Syracuse University
Dynamic Contact Initiation with Adhesive
Silicone Gels
Meredith Taghon, Williams College
Microscale Friction of Soft and Swollen Elastomers
Dr. Sazzadul Alam Rahat, University of Cincinnati
Adaptive Structural Adhesives: How Do You Design Rapid Response in a Polymer Glass or Composite?
Joseph Dennis, U.S. Army Research Laboratory
Dynamic Temperature Control of Epoxy Frontal Polymerization by Induction
Dung Tran, Nanyang Technological University
Wednesday, February 19 7:00 – 7:45 a.m.
8:00 – 8:45 a.m.
Wed. AM Session
Organismal and Biomimetic
Pelican Room I, 3rd Floor
Session Chairs: Mehdi Vahdati, CNRS, Institut Charles Sadron & Stephanie Hughes, Dow Chemical Company
KEYNOTE
9:00 to 9:25 a.m.
9:25 to 9:50 a.m.
High-throughput Sequence-Function Characterization of Protein-Based Materials
Danielle Tullman-Ercek, Northwestern University
Applying Engineering Principles to Characterize Adhesive Characteristics of Seed Mucilage
Caroline Szczepanski, Michigan State University
9:50 to 10:15 a.m.
10:15 to 10:45 a.m.
10:45 to 11:10 a.m.
Laser-Induced Shockwave Spallation for Versatile 2D Micro Patterning of Colloidal Monolayer Crystals with Sharp Geometries
Joonwoo Park, Pusan National University
11:10 to 11:35 a.m.
Improved High-throughput Screening Methods for Probing Peptide Adhesive Interactions
Mark Kozlowski, DEVCOM Army Research Laboratory
Aqueous Protein Adhesives for Rapidly Bonding to Rough Substrates
Zach Lamberty, U. S. Naval Research Laboratory
11:35 to 11:50 a.m.
11:50 a.m. to 12:05 p.m.
12:05 to 12:20 p.m.
Biomimetic Inspired Catechol Compounds for Improved Solubility, Curing Kinetics, Thermomechanical Properties, and Wet Adhesion in Structural Applications
Jason Lennon, University of Delaware
Stress Sensing and Adhesion Maintenance in Plant Cells
Michael Wilson, Purdue University
Breakfast on Your Own
Plenary Talk III: Receding Contact Lines and the Adhesion of Drops
Hans-Jürgen Butt, Max Planck Institute Mainz • Session Chair: Nick La Salle Ballroom A, 3rd Floor
Adhesion and Fracture in Extreme Environments & Contamination by Ice, Water, and Insects
Pelican Room II, 3rd Floor
Session Chair: Joann Hilman, Brighton Science
Optimizing Structural Adhesives for Reprocessable Polymer Concretes for Lunar Habitats
Broderick Lewis, Northwestern University
KEYNOTE
Strategies Toward Lunar Dust Adhesion and Abrasion Mitigation
Christopher Wohl, NASA Langley Research Center
Investigating Snowflake Dynamics on Superhydrophobic Surfaces for AntiIcing Applications
Ehsan Khoshbakhtnejad, University of Toledo
Soft Robotics
Poydras Room, 3rd Floor
Session Chairs: Andrew Croll, North Dakota State University & Gabriel Sanoja, University of Texas at Austin
BIOSENTER: Bioinspired Soft Enteroscopic Robot for Facilitating Locomotion, Steering, and Intervention in the Deep Small Intestine of a Porcine Model
Binbin Ying, Massachusetts Institute of Technology
The Adhesion in Wrapping Mechanism with an Elastomer Membrane
Yeunhee Kim, Virginia Tech
Damage Tolerant Electronics through Programmed Liquid Metal Microstructures
Ravi Tutika, Virginia Tech
Interfacial Cavitation in Peeling
Rong Long, University of Colorado Boulder
Fracture Mechanics of Osmotic Blisters
Hamed Lakrout, Polymer Physics Consulting
The Experimental J-integral in Ice Adhesion
Kyle Messer, Dartmouth College
Improving Hamaker Constant Estimates of Particle-Solid Systems via a Centrifuge-Based Method
Juan Manuel Vasquez, Purdue University
Anisotropic and Heterogeneous Thermal Conductivity in Programmed Liquid Metal Composites through Direct Ink Writing
Ohnyoung Hur, Virginia Tech
Highly Tunable Dry Adhesion of Soft Shells through Low Pressure
Chenxu Zhao, Syracuse University
Saltwater Resiliency in Liquid Metalpolymer Composites
Ella Williams, Virginia Tech
High Strength and Dynamically Tunable Adhesion via Composite Micropillar Arrays Fabricated by Solvent-Assisted Molding
Kevin Turner, University of Pennsylvania
A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration
Wuzhou Zu, Virginia Tech
Challenges in 3D Printing
Fulton Room, 3rd Floor
Session Chair: Chelsea Davis, University of Delaware
Predicting Printability and Properties of Highly Filled Polymer Suspensions via Vat Photopolymerization
Amy Peterson, University of Massachusetts Lowell
Welding Between Polymer Films Prepared at Different Temperatures - Thermal Equilibration and Polymer Dynamics
Mauro Mugnai, Georgetown University
Interlayer Adhesion in Polymer Composites for Additive Manufacturing
Arit Das, Oak Ridge National Laboratory
Tools and Methods for Characterization
Acadian Rooms I & II, 3rd Floor
Session Chair: Nao Terasaki, National Institute of Advanced Industrial Science & Technology (AIST)
Deciphering Mechanical Damage Signatures in Epoxy Mold Compounds for Microelectronics Packaging
Jamie Kropka, Sandia National Laboratories
The Temperature Hierarchy: The Difference Between Adhesion Success and Failure
Michael Bonner, Saint Clair Systems Inc.
Apply Design of Experiments (DoE) to Optimize Sealant Spray Conditions
Lei Zheng, Henkel Corporation
Reversible/Responsive II
La Salle Ballroom A, 3rd Floor
Session Chair: Anthony Arrowood, University of Texas at Austin
Dynamic Pressure-Sensitive Adhesion from Liquid Crystal Elastomers
Mohand Saed, University of Cambridge
Hard-Soft Electroadhesion: Reversibly Sticking Metals and Graphite to Hydrogels and Tissues
Irene Orueta Ortega, University of Maryland
KEYNOTE
Ionoelastomer Heterojunctions as Lowvoltage Electroadhesives
Ryan Hayward, University of Colorado Boulder
Fracture Toughness of Additively Manufactured Propellants Through Cutting Along Welds
Tyler Roberts, Purdue University
Investigating the Interlayer Adhesion of 3D-printed Water-responsive Cellulosederived Polymer Composites
Yimin Yao, Virginia Tech
Rheology and Direct Ink Write Additive Manufacturing of Sustainable Cellulosebased Nanocomposites
Kevin Ramos Lopez, Virginia Tech
Additive Manufacturing of TiO2-PLA Composites versus PLA Surface treated TiO2: Strategy for Optimizing Photocatalytic Performance
Nadine van Westrenen, Virginia Tech
Electrically Induced Debonding on Different Pretreated Aluminum Alloys
Philip-Marc Barnewitz, Bundeswehr Research Institute for Materials, Fuels and Lubricants
E-Glue: A Universal Way to Glue Soft Aqueous Materials in 3D Using Electric Fields
Morine Nader, University of Maryland College Park
New Method to Measure Contact Angles Indirectly on Superhydrophobic Surfaces with Low Uncertainty
Juan Valentin Escobar, Universidad Nacional Autónoma de México
High-Rate Fracture Dynamics of PMMA with Laser-Induced Membrane Expansion
Jonathan Raybin, National Institute for Standards and Technology
Morphology-Property Relationships of BEVA-like Adhesives for Art Conservation Applications
Erin Crater, Virginia Tech
Osmocapillary Adhesion for Reversible and Robust Gel Adhesion Over Diverse Substrates
Qihan Liu, University of Pittsburgh
Side-chain Nematic Liquid Crystalline Pressure Sensitive Adhesive
Noboru Koshimizu, University of Cambridge
Spreading Dynamics of Transiently Crosslinked Polydimethylsiloxane Drops
Kyujin Ko, University of Cincinnati
Rapid and Transparent Tactile Actuators based on Molecular Ordering for Fine Touch
Charles Dhong, University of Delaware
Deactivating High Strength CatecholBased Adhesive by Electrochemistry
Bruce Lee, Michigan Technological University
First Floor