Adhesion Society 2021 Annual Meeting Final Program

Welcome

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

VIRTUAL HOUSEKEEPING GUIDELINES 1 2 3 4

For the best user experience, we recommend following the below: A device that is connected to the internet, either by ethernet or WiFi (preferably a computer; tablets and mobile devices can be used if necessary).

A stable internet connection (check your internet speed; some slower speeds will result in slower loading times for our web pages).

A platform-supported web browser (we strongly suggest using Google Chrome when navigating the virtual conference - Safari and Firefox can have issues viewing webinars). All Mac laptop users MUST use Google Chrome to join the live webinars.

Update your website settings in your browser to allow pop-ups.

5

Zoom software downloaded to your device (Zoom is only required for Networking Lounges and private meetings with attendees - download the software for free here).

6

A fter registering for the first time and completing the set-up of your account, go back to the home page to bookmark the page. This will make it easier for you to sign-in and access your account throughout the conference.

7

Please use the chat box to enter questions for the speaker. Please be sure you are utilizing Google Chrome as your browser. If the session has started and the video isn’t playing or you’re having trouble with sound, please refresh your browser.

8

For general questions regarding the virtual conference site, please contact virtual@conferencedirect.com.

Annual meeting Sponsors A special “THANK YOU” to our generous sponsors: • Adhesion Society Award for Excellence in Adhesion Science sponsored by 3M Company • The Robert L. Patrick Fellowship Award sponsored by The Adhesion Society • Distinguished

Paper Award sponsored by the Henkel Corporation • Peebles

Awards for Graduate Student Research in Adhesion Science by the Adhesion Society • Alan Gent Distinguished Student Paper Award sponsored by Henkel Corporation • Best Poster Award sponsored by Avery Dennison • Adhesion Society Early Career Scientist Award sponsored by the Adhesive & Sealant Council • Student Support sponsored by 3M Company 1 The Adhesion Society 2021

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Daily Virtual Program Schedule

Monday, February 22 8:00 to 8:15 a.m.

Introduction & Welcome

8:15 to 8:25 a.m.

Remembrance of Mark Robbins

8:30 to 9:15 a.m.

Panel Discussion

Al Crosby, Adhesion Society President Mark Stevens, Sandia National Laboratories

I ntersections of Equity and Sustainability in Science Mark Miodownik, University College London

Rose Mutiso, CEO Mawazo Institute Megan Valentine, University of California Santa Barbara

Al Crosby, Adhesion Society President

9:15 to 9:45 a.m.

Networking (building on the panel discussion) 9:45 to 10:05 a.m. Break 10:05 to 12:30 p.m. 2021 Award for Excellence in Adhesion Society Symposium sponsored by: Honoring Eduard Arzt Session Chair: Taher Saif, University of Illinois at Urbana-Champaign lenary Talk: Adhesive Surface Microstructures P Inspired by Nature – Now Coming of Age? Eduard Arzt, Leibniz Inst. for New Materials 10:50 a.m. BREAK 11:10 a.m. Keynote Characterizing Soft Materials with Microfluidic Tools Anke Lindner, ESPCI 11:35 a.m. Keynote From the Miniature Gecko Foot to the Ear Drum Gentiana Wenzel, Saarland University

Noon Keynote Switchable Adhesives for Multifunctional Interfaces Michael Bartlett (2020 Early Career Scientist Award), Virginia Tech

10:05 a.m.

12:30 to 1:30 p.m.

Break

1:30 to 2:30 p.m.

Poster Session

5. Connecting Morphology to Mechanical Response in Thin Block Copolymer Films Cynthia Bukowski, University of Massachusetts, Amherst 6. Mesoscale Polymer Ribbons as Hierarchical Building Blocks and Dynamically-Bonded Adhesives Demi Moed, University of Massachusetts, Amherst 7. Adhesion Strength Measurement with Pressurization on the Interface of Soft Hydrogels Hongbo Fu, University of Massachusetts, Amherst 8. Soft Adhesive Latches to Control the Kinematic Response of a Recoiling Band Meredith Taghon, University of Massachusetts, Amherst 9. Study of Wetting Properties of Different Solid-liquid Systems by the Centrifugal Adhesion Balance Akash Kumar Jena, Lamar University 10. Transition in the Acid−Base Component of Surface Free Energy of Ice Nathaniel Orndorf, The University of Akron 11. Polymer Ribbons as Hierarchically Ordered Mesoscale Building Blocks Cornelia Meissner, University of Massachusetts, Amherst 12. Fracture Mechanics in Double-Network Elastomers of Bottlebrush Polymer and Linear Polymer Quantified Hyemin Kim, University of Massachusetts Amherst 13. Mechanical Properties Measurement of Giant Vesicles

by Atomic Force Microscopy with Adhesion Ran Ran, Northeastern University 15. Cooperative Hydrogen Bonding - Towards Robust Underwater Adhesion Zach Lamberty, Johns Hopkins University 16. Optical Investigation of Energy-controlled Mode I Crack Propagation in Viscoelastic Adhesive Joints Peer Schrader, Technische Hochschule Mittelhessen 17. In-situ Observation and Machine Learning: Can We Predict Adhesion Performance?

Manar Samri, INM - Leibniz Institute for New Materials 18. An Ionic Liquid Derived Nickel-based Coordination Polymer as a Multifunctional Curing Agent for Epoxy Resins Sainath Jadhav, University of Akron 19. Roughness Tolerant Crumpled Adhesives Theresa Elder, North Dakota State University 20. Polypropylene Blends for Material Extrusion Additive Manufacturing Arit Das, Virginia Tech

Session Chair: Chuck Williams, Avery Dennison 1. Adhesive Behaviour of PDMS and PDMS Mixtures at Various Temperatures Andrew Croll, North Dakota State University 2. Primer Adhesion to Low Energy Roofing Substrates Ann Evans, Dow 3. Machine Learning to Predict Joint Performance in Epoxy Composites Based on Process Parameters Brennen Middleton, NASA Langley Research Center 4. Characterizing the Mixed-Mode Fracture Envelope for a Tough Adhesive Christopher Magnani Jackson, Virginia Tech

2:30 – 3:30 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

44th Annual Meeting Final Program 2

Daily Virtual Program Schedule

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Tuesday, February 23 7:00 to 8:00 a.m.

Poster Session

Session Chair: Chuck Williams, Avery Dennison

12. Fracture Mechanics in Double-Network Elastomers of Bottlebrush Polymer and Linear Polymer Quantified Hyemin Kim, University of Massachusetts Amherst 13. Mechanical Properties Measurement of Giant Vesicles

by Atomic Force Microscopy with Adhesion Ran Ran, Northeastern University

1. Adhesive Behaviour of PDMS and PDMS Mixtures at Various Temperatures Andrew Croll, North Dakota State University

15. Cooperative Hydrogen Bonding - Towards Robust Underwater Adhesion Zach Lamberty, Johns Hopkins University

2. Primer Adhesion to Low Energy Roofing Substrates Ann Evans, Dow

16. Optical Investigation of Energy-controlled Mode I Crack Propagation in Viscoelastic Adhesive Joints Peer Schrader, Technische Hochschule Mittelhessen

3. Machine Learning to Predict Joint Performance in Epoxy Composites Based on Process Parameters Brennen Middleton, NASA Langley Research Center 4. Characterizing the Mixed-Mode Fracture Envelope for a Tough Adhesive Christopher Magnani Jackson, Virginia Tech 5. Connecting Morphology to Mechanical Response in Thin Block Copolymer Films Cynthia Bukowski, University of Massachusetts, Amherst 6. Mesoscale Polymer Ribbons as Hierarchical Building Blocks and Dynamically-Bonded Adhesives Demi Moed, University of Massachusetts, Amherst

17. In-situ Observation and Machine Learning: Can We Predict Adhesion Performance?

Manar Samri, INM - Leibniz Institute for New Materials 18. An Ionic Liquid Derived Nickel-based Coordination Polymer as a Multifunctional Curing Agent for Epoxy Resins Sainath Jadhav, University of Akron 19. Roughness Tolerant Crumpled Adhesives Theresa Elder, North Dakota State University 20. Polypropylene Blends for Material Extrusion Additive Manufacturing Arit Das, Virginia Tech

7. Adhesion Strength Measurement with Pressurization on the Interface of Soft Hydrogels Hongbo Fu, University of Massachusetts, Amherst 8. Soft Adhesive Latches to Control the Kinematic Response of a Recoiling Band Meredith Taghon, University of Massachusetts, Amherst 9. Study of Wetting Properties of Different Solid-liquid Systems by the Centrifugal Adhesion Balance Akash Kumar Jena, Lamar University 10. Transition in the Acid−Base Component of Surface Free Energy of Ice Nathaniel Orndorf, The University of Akron 11. Polymer Ribbons as Hierarchically Ordered Mesoscale Building Blocks Cornelia Meissner, University of Massachusetts, Amherst

3 The Adhesion Society 2021

8:00 to 8:15 a.m.

Break

8:15 to 9:00 a.m. Plenary Talk: Celebrating JKR 50th Anniversary Revealing Adhesion Interface Phenomena Through In Situ Approaches Kathryn Wahl, Naval Research Laboratory

Session Chair: Edwin Chan, NIST

9:00 to 9:30 a.m.

Break

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Tuesday, February 23 Technical Sessions A

Technical Sessions B

Chemistry

Elasticity, Capillarity, and Wetting

Session Chairs: Elizabeth Santos, Dow & Erich Bain, Engineering Systems Inc. Keynote

Session Chairs: Amy Peterson, University of Massachusetts Lowell & Jonathan Pham, University of Kentucky

9:30 to 9:55 a.m.

9:30 to 9:55 a.m.

Single Component Adhesives: Tuning Properties by Network Architecture Sergei Sheiko, University of North Carolina

Elastocapillary Adhesion of Compliant Gel Microspheres Katharine Jensen, Williams College

9:55 to 10:20 a.m.

9:55 to 10:20 a.m.

Catechol-Functionalized Latex Polymers for Adhesion to Polyolefin Substrates

Thomas Kalantar, Dow, inc

10:20 to 10:45 a.m.

Enhancing Interfacial Adhesion between Non-sized Carbon Fiber and Epoxy Matrix via CuAAC Click-modified Silane Coupling Agents

Jaeho Shin, Seoul National University

10:45 to 11:10 a.m.

Switchable and Controllable Pressure Sensitive Adhesive by hoto-responsive Polymer

Tae-hyung Lee, Seoul National University

11:10 a.m. to 12:10 p.m.

Effect of Fluid Fraction and Dwell Time on the Adhesion of Fluid Infused Elastomers

Anushka Jha, Johns Hopkins University

Novel Tools & Methods for Characterization

12:10 to 12:35 p.m.

12:35 to 1:00 p.m.

1:00 to 1:25 p.m.

Pressure-induced Cavitation for Quantifying Performance of Confined Adhesives

Hares Wahdat, University of Massachusetts Amherst

1:25 to 1:50 p.m.

Time-Temperature-Cure Superposition (TTCS) Methods for Determining Viscoelasticity During Curing

Aaron Hedegaard, 3M Company

1:50 to 2:20 p.m.

2:20 to 3:20 p.m.

BREAK

BREAK

Session Chairs: Amy Peterson, University of Massachusetts Lowell & Katherine Jensen, Williams College

Simplified Experimental Evaluation of Dynamic Mechanical Properties of Pressure Sensitive Adhesives

Edoardo Nicoli, Dow Chemical Company Interfacial Reactions Related to Enhanced Adhesion at Polymer/Polymer Interfaces Studied with SFG

John Andre, University of Michigan

11:10 a.m. to 12:10 p.m.

Elasticity, Capillarity, and Wetting

Session Chairs: Ajay Krishnamurthy, National Institute of Standards & Technology & Evan Breedlove, 3M Company

10:45 to 11:10 a.m.

Adhesion and Detachment of Colloidal Microparticles with Different Geometries in ElectrolyteSolution

Ran Ran, Northeastern University

BREAK

10:20 to 10:45 a.m.

Fluid Separation and Network Deformation in Wetting of Soft and Swollen Surfaces

Zhuoyun Cai, University of Kentucky

12:10 to 12:35 p.m.

Delaying Frost Growth Using Jumping and Sweeping Condensate Droplets

Behrouz Mohammadian, University of Toledo

12:35 to 1:00 p.m.

Keynote

Magnetically Directed Adhesion of DNA-Functionalized Colloids

Sibani Biswal, Rice University

1:00 to 1:25 p.m.

Gravity Assisted Super High Flux Microfiltration Polyamide-imide Membranes for Oil/Water Emulsion Separation

Asad Asad, University of Alberta

1:25 to 1:50 p.m.

Connections between Adhesion and Drainage of Water at Contact Interface

Nityanshu Kumar, University of Akron

1:50 to 2:20 p.m.

BREAK

2:20 to 3:20 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd. 44th Annual Meeting Final Program 4

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Tuesday, February 23 Technical Sessions C

Technical Sessions D

Biomedical

JKR 50th Anniversary & Mechanics of Adhesion

Session Chairs: Bruce Lee, Michigan Technological University & Jayant Joshi, Hollister Incorporated

9:30 to 9:55 a.m.

Enhanced Adhesion Properties of Film-Terminated Microstructures on Different Roughness Substrates

Gabriela Moreira Lana, Leibniz Institute for New Materials - INM

Keynote

9:55 to 10:20 a.m.

Techniques for Assessing the Effects of Adhesives on Human Skin in Vivo

Gary Grove, cyberDERM, Inc.

10:20 to 10:45 a.m.

Adhesion in the Specific Targeting of Breast Cancer Cells Using Triptorelin-Conjugated Nanoparticles

Jingjie Hu, Princeton University

10:45 to 11:10 a.m.

Utilization of Hydrogen Peroxide Byproduct in Catechol-Based Adhesive for Dermal Wound Healing

Rattapol Pinnaratip, Michigan Technological University

Session Chairs: Michael Bartlett, Virginia Tech & Nick Shephard, Dow

9:30 to 9:55 a.m.

A Body Force Based FE Solver for General Planar Adhesive Contact Problems Suprateek Roy, Indian Institute of Science, Bengaluru

9:55 to 10:20 a.m.

Analysis of Adhesive Contact with a Pressure Tunable, Patterned Surface Naomi Deneke, Purdue University

10:20 to 10:45 a.m.

Adhesion Enhancement by Small-scale Roughness Induced Contact Instability

Weilin Deng, Saint-Gobain Research North America

10:45 to 11:10 a.m.

Programmable Kirigami-inspired Adhesion Dohgyu Hwang, Virginia Tech

11:10 a.m. to 12:10 p.m.

11:10 a.m. to 12:10 p.m.

Session Chairs: Michael Bartlett, Virginia Tech, & Jonathan Pham, University of Kentucky

Session Chairs: Bruce Lee, Michigan Technological University & Jayant Joshi, Hollister Incorporated 12:10 to 12:35 p.m.

Antimicrobial Property of Biomimetic Halogenated Catechol Adhesive Moiety

Bruce Lee, Michigan Technological University

12:35 to 1:00 p.m.

Multi-functional Bioadhesive Platforms for Translational Tissue Adhesive Technologies

Hyunwoo Yuk, Massachusetts Institute of Technology

1:00 to 1:25 p.m.

Peebles Award

Strain-Programmable Bioadhesive Patch for Accelerated Diabetic Wound Healing

Heejung Roh, Massachusetts Institute of Technology

1:25 to 1:50 p.m.

Peebles Award

Synthetic Liquid Phase Condensates as Underwater Adhesives

Amal Narayanan, University of Akron

1:50 to 2:20 p.m.

BREAK

2:20 to 3:20 p.m.

12:10 to 12:35 p.m.

Exploiting Surface Topography for Adhesion Control

Ranny Zhao, University of Pennsylvania

12:35 to 1:00 p.m.

MContact Line Pinning in Soft Adhesion

Antoine Sanner, Albert-Ludwigs-Universität Freiburg

1:00 to 1:25 p.m.

Contact of Soft Composite Surfaces: Experiments and Simulation

Alison Dunn, University of Illinois at Urbana-Champaign

1:25 to 1:50 p.m.

Influence of a Single Layer Graphene on Adhesion Hysteresis

Saranshu Singla, University of Akron

1:50 to 2:20 p.m.

BREAK

2:20 to 3:20 p.m.

Networking & Exhibition

2021 Exhibitors Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd. 5 The Adhesion Society 2021

BREAK

JKR 50th Anniversary & Mechanical of Adhesion

BREAK

Biomedical

Peebles Award

• Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Tuesday, February 23 Technical Sessions E

Technical Sessions F

Organismal

Fracture – Structural

Session Chairs: Dan Sameoto, University of Alberta & Marleen Kamperman, University of Groningen

9:30 to 9:55 a.m.

Session Chairs: Aaron Forster, National Institute of Standards & Technology & Ken Shull, Northwestern University

9:30 to 9:55 a.m.

Bioinspired Complex Coacervate-based Adhesives

Marleen Kamperman, University of Groningen

Reflections on Steering Cracks (and Herding Cats)

David Dillard, Virginia Tech

9:55 to 10:20 a.m.

Gelatin-based Model Surfaces and Hydrogels for Studying Bioadhesion

Zuxiang Xu, ESPCI Paris

10:20 to 10:45 a.m.

Mussel Longitudinal Ducts – A Micro-channel System for Production of a Vanadium-cured Wet Adhesive

Tobias Priemel, McGill University

10:45 to 11:10 a.m.

Adhesion of Fully Transient, Mussel-Inspired Hydrogels with Different Network Bonding Modalities

Daniel Darby, University of Kentucky

11:10 a.m. to 12:10 p.m.

12:10 to 12:35 p.m.

12:35 to 1:00 p.m.

Durable Passive Anti-Icing Coatings for Rotorcraft

Jill Seebergh, Boeing Company

1:00 to 1:25 p.m.

Enhanced Ice-Friction Using Damage Induced Surface Texturing of Nanocomposites

Navid Namdari, University of Toledo

1:25 to 1:50 p.m.

Impact of Surface Properties on Snow Adhesion and Shedding Mechanisms

Behrouz Mohammadian, University of Toledo

1:50 to 2:20 p.m.

BREAK

2:20 to 3:20 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

10:45 to 11:10 a.m.

11:10 a.m. to 12:10 p.m.

BREAK

Fracture – Extreme Conditions and Surface Prep

Session Chairs: Mike Bortner, Virginia Tech & Hossein Sojoudi, University of Toledo Durable, Icephobic Coatings from Dual Component Polyurethanes with 3D Micron Scale Structure

Andrew Nowak, HRL Laboratories

Peebles Award

A Comparative Study Between Paris’ Approach and Beam Theory Data Reduction Methods

Douglas Hartley, Virginia Tech

Ice, Insects, Marine & Other Contamination

10:20 to 10:45 a.m.

Characterizing Friction in Carbon Fiber Thermoset Composites During Curing

Arit Das, Virginia Tech

BREAK

9:55 to 10:20 a.m.

Fracture Mechanical Mixed-mode I+III Tests Controlled on Contributions of J-integral Applied to Adhesively Bonded Joints

Lukas Loh, TH Mittelhessen

Session Chairs: Joe Dennis, ARL & Shruti Rattan, DuPont

12:10 to 12:35 p.m.

Keynote

Rate-Dependent Fracture Behavior of Additively Manufactured Polymers for Military Needs

Leslie Lamberson, Colorado School of Mines

12:35 to 1:00 p.m.

Mechanochemistry as a Tool to Study Cavitation in Multiple-Network Elastomers

Xavier Morelle, ESPCI CNRS

1:00 to 1:25 p.m.

Topographical and Surface Free Energy Measurement of Plastics and Relation to Adhesive Peel Strength

William Gabler, Shimadzu Scientific Instruments

1:25 to 1:50 p.m.

Mechanical Polishing of AA6061-T6 Alloy for the Application of Adhesive Bonding

Mani Mohan Tiwari, UQAC

1:50 to 2:20 p.m.

BREAK

2:20 to 3:20 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

6

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Daily Virtual Program Schedule

Wednesday, February 24

Technical Sessions A Machine Learning and High Throughput Experimentation

7:00 to 8:00 a.m. General Networking and Women’s Networking Session 8:00 to 8:45 a.m. Plenary Talk: Hierarchy and Architecture - Tailoring Physical Associations Toward Functional Networks

LaShanda Korley, University of Delaware Session Chair: Niels Holten-Andersen, MIT

8:45 to 9:15 a.m.

Break

Session Chairs: Sarah Fischer, Fraunhofer IZFP, Jamie Booth, California State University, Northridge & Anand Jagota, Lehigh University

9:15 to 10:05 a.m.

Tutorial Keynote

Multiscale Machine Learning Modeling of Bioinspired Mechanics, Adhesion and Attachment

Markus Buehler, Massachusetts Institute of Technology

10:05 to 10:30 a.m.

Learning to Predict Single-Wall Carbon Nanotube-Recognition DNA Sequences

Anand Jagota, Lehigh University

10:30 to 10:55 a.m.

Automated High Throughput Tack & Friction Development and its Applications in Soft Polymer Gels Tack

Grace Wan, Dow Chemical Company

10:55 to 11:55 a.m.

BREAK

Machine Learning and High Throughput Experimentation

Session Chairs: Sarah Fischer, Fraunhofer IZFP, Jamie Booth, California State University, Northridge & Anand Jagota, Lehigh University

11:55 to 12:20 p.m.

Machine Learning as Powerful Tool to Push the Boundaries in Classical Material Evaluation: An Introduction to Machine Learning from an Applied Science Perspective

Simon Herter, Fraunhofer IZFP

12:20 to 12:45 p.m.

A Deep Learning Approach to the Inverse Problem of Modulus Identification in Elasticity

Bo Ni, Brown University

12:45 to 1:10 p.m.

AI-infused Experimentation: A New Framework to Accelerate Material Characterization

Christos Athanasiou, Brown University

1:10 to 2:05 p.m.

2:05 to 3:05 p.m.

BREAK

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

7 The Adhesion Society 2021

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Wednesday, February 24 Technical Sessions B

Technical Sessions C

PSAs and Viscoelasticity

Bioinspired

Session Chairs: Chelsea Davis, Purdue University & Dohgyu Hwang, Virginia Tech

9:15 to 9:40 a.m.

Session Chairs: Dan Sameoto, University of Alberta & Marleen Kamperman, University of Groningen

9:15 to 9:40 a.m.

Improving the Strength and Toughness of Macroscale Double Networks via Poisson’s Ratio Mismatch

Daniel King, Hokkaido University

An Optimization Strategy for Microfibrils Terminated by Mushroom Cap with Dry Adhesion Behavior

Xuan Zhang, Leibniz Institute for New Materials

9:40 to 10:05 a.m.

The Internal Adhesion of Crumpled Matter Andrew Croll, North Dakota State University

10:05 to 10:30 a.m.

Mechanically and Spatially Variable Gecko-inspired Fibers for Multi-Mechanism Adhesion

Dan Sameoto, University of Alberta

Quantifying Error and the Potentially Misleading Conclusions of the Cox-Merz Approximation

Evan Breedlove, 3M Company

10:30 to 11:55 a.m.

BREAK

Session Chairs: Chelsea Davis, Purdue University & Chuck Paul, Henkel Corporation

Keynote

Gecko-inspired Fibrillar Adhesion: A Perspective on 20 Years of Progress

Ronald S. Fearing, University of California, Berkeley

10:30 to 10:55 a.m.

BREAK

Session Chairs: Dan Sameoto, University of Alberta & Dylan Matthew Barber, University of Massachusetts Amherst

11:55 a.m. to 12:20 p.m.

12:20 to 12:45 p.m.

10:55 to 11:55 a.m.

Bioinspired

Surface Characterization of Arylic Acid Content in Pressure Sensitive Adhesives

Raymond Sanedrin, KRUSS USA

10:05 to 10:30 a.m.

Gecko-inspired Hybrid Tapes

Vasav Sahni, 3M Company

PSAs and Viscoelasticity

9:40 to 10:05 a.m.

11:55 a.m. to 12:20 p.m.

The Tape Drape Test – A Practical and Nondestructive Way to Assess Elastic Moduli of Pavement Marking

Mitchell Rencheck, Purdue University

Programmable Adhesion of Mesoscale Ribbons at a Liquid-Liquid Interface

Dylan Matthew Barber, University of Massachusetts Amherst

12:20 to 12:45 p.m.

Mechanics of Structural Toughening in Sutured Composites Amir Darabi, Montana State University

12:45 to 1:10 p.m.

12:45 to 1:10 p.m.

Supramolecular Movable Cross-linker in Pressure Sensitive Adhesives: Movable Cross-linking Effects

Mo-Beom Yi, Seoul National University

1:10 to 1:35 p.m.

Peebles Award

Fingering Instability During Debonding Between Two Soft Materials

Preetika Karnal, Johns Hopkins University

1:35 to 2:05 p.m.

Mechanical-Chemical Surface Modification of PDMSe for AF/FR Marine Vessel Coatings

Yi Wei, University of Florida

1:10 to 1:35 p.m.

Functional Grading and Misalignment for Fibrillar Adhesive Control

Albert Kong, University of British Columbia

BREAK

2:05 to 3:05 p.m.

Peebles Award

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

1:35 to 2:05 p.m.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd. 44th Annual Meeting Final Program 8

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Wednesday, February 24 Technical Sessions D

Technical Sessions E

Soft Tribology

Ice, Insects, Marine, Other Contamination

Session Chairs: Rong Long, University of Colorado Boulder & Daniel Maksuta, University of Akron

9:15 to 9:40 a.m.

Unsteady State Friction of Rubber Under Curvilinear Sliding Motions

Antoine Chateauminois, ESPCI

9:40 to 10:05 a.m.

Transient Frictional Response of Poroelastic Contacts with Thin Hydrogel Films

Lola Ciapa, SIMM

10:05 to 10:30 a.m.

Transition from Adhesion to Slip at a Fluid-solid Interface

Marion Grzelka, University of Amsterdam

10:30 to 10:55 a.m.

Static Friction at a Soft and Adhesive Microscale Interface

Justin Glover, University of Kentucky

Session Chairs: Chris Wohl, NASA Langley Research Center & Hossein Sojoudi, University of Toldeo

10:55 to 11:55 a.m.

BREAK

9:40 to 10:05 a.m.

Preventing Snow Accumulation on Cameras of Autonomous Vehicles Behrouz Mohammadian, University of Toledo

10:05 to 10:30 a.m.

Transparent Hydrophobic Sensor Coatings: Insect Impact and Cleaning

Sabrina Peczonczyk, Ford Motor Company

Session Chairs: Rong Long, University of Colorado Boulder & Daniel Maksuta, University of Akron

12:20 to 12:45 p.m.

Lateral Contact Governs the Shear Response Between Micropatterned Surfaces and Hydrogel Substrates

Kristin Calahan, University of Colorado, Boulder

12:45 to 1:10 p.m.

Tribology of CMP Pad Conditioning Process

Shruti Rattan, DuPont

1:10 to 1:35 p.m.

Role of Divalent Cations in Enhancing the Adhesion of Anionic Polyacrylamide on Montmorillonite

Wenyuan Sun, University of Alberta

1:35 to 2:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

9 The Adhesion Society 2021

BREAK

Session Chairs: Chris Wohl, NASA Langley Research Center & Kevin Golovin, University of British Columbia

11:55 a.m. to 12:20 p.m.

Keynote

NASA’s Dust Mitigation Strategy

Michael Johansen, NASA Langley Research Center

12:20 to 12:45 p.m.

An Overview of LO-DuSST (Lunar Occupancy Dust Surface Separation Technologies) Objectives

Christopher Wohl, NASA Langley Research Center

12:45 to 1:10 p.m.

Bio-inspired Surface Structures to Mitigate Interfacial Particle Adhesion: A Review

Lopamudra Das, NASA Langley Research Center

1:10 to 1:35 p.m.

Developing Wear-Resistant Coatings for Lunar Dust Tolerant Applications

Valerie Wiesner, NASA Langley Research Center

BREAK

2:05 to 3:05 p.m.

10:55 to 11:55 a.m.

Ice, Insects, Marine & Other Contamination

11:55 a.m. to 12:20 p.m.

Materials and Mechanics for Engineering Human Touch

Charles Dhong, University of Delaware

10:30 to 10:55 a.m.

Contamination, Cleaning, and Durability Tests of a Vertical Tail Plane with Microperforation

Elmar Bonaccurso, Airbus Group Innovations

Soft Tribology

9:15 to 9:40 a.m.

Physico-Chemical and Computational Investigation of Non-isocyanate Urethane-based Amphiphilic Gels

Vishal Vignesh, University of Florida

1:35 to 2:05 p.m.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Wednesday, February 24 Technical Sessions F Fracture – Soft

Session Chairs: Andrew Croll, North Dakota State University & Amy Peterson, University of Massachusetts Lowell

9:15 to 9:40 a.m.

Role of Sacrificial Bonds on Durability and Toughness of Unfilled Elastomers

Gabriel Sanoja, ESPCI Paris

9:40 to 10:05 a.m.

Morphological Origins of Temperature and Rate Dependent Mechanical Properties of Model Soft-TPEs

Simone Sbrescia, DSM

10:05 to 10:30 a.m.

Detection of Early-Stage Damage and Strain Rate Heterogeneity During the Fracture of Elastomer

Jianzhu Ju, ESPCI

10:30 to 10:55 a.m.

Peebles Award

Puncture Mechanics of Ultra-soft Hydrogels at Electrocapillary Length Scale

Yuanyuan Wei, ESPCI

10:55 to 11:55 a.m.

BREAK

Session Chairs: Ray Pearson, Lehigh University, Edwin Chan, NIST & Kevin Turner, University of Pennsylvania 11:55 a.m. to 12:20 p.m.

Mechanical and Fracture Properties in Composites and Material Extrusion Additive Manufacturing

Aaron Forster, National Institute of Standards & Technology

12:20 to 12:45 p.m.

Fractured Infill for Optimized Stacking Prints and Jamming Actuators Dan Sameoto, University of Alberta

12:45 to 1:10 p.m.

Low Volatility Unsaturated Polyester Resins for 3D Printing Structural Adhesives

Cody Weyhrich, Virginia Tech

1:10 to 1:35 p.m.

Fused Filament Fabrication of Flexible Hot Melt Adhesives

Masoumeh Pourali, University of Massachusetts Lowell

1:35 to 2:05 p.m.

President Al Crosby University of Massachusetts

Immediate Past President Tim Long Arizona State University

Vice President Joelle Frechette Johns Hopkins University

Secretary Aaron Forster NIST

Treasurer Chris Campbell Editor Shantanu Ranade Apple

Members at Large Rong Long, Colorado University Marleen Kamperman, University of Groningen Andrew Croll, North Dakota State University Bioadhesion Division Chair Dan Sameoto, University of Alberta Structural Adhesives Division Chair & Vice-Chair Michael Bortner, Virginia Tech Alejandra Alvarez Albarran, Tesla Soft Adhesives Division Chair Amy Peterson, University of Massachusetts Lowell Home Office Manager/Logistics Chair Malinda Armstrong, The Adhesion Society

BREAK

2:05 to 3:05 p.m.

Executive Committee

3M Company

Adhesion and Fracture of Complex Additively Manufactured Structures

AS 2021 Virtual Annual Meeting

Networking & Exhibition

2021 Exhibitors

2021 Program Chairs Michelle Seitz, DSM Niels Holten-Andersen, Massachusetts Institute of Technology

• Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd. 44th Annual Meeting Final Program 10

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Daily Virtual Program Schedule

Thursday, February 25 7:00 to 7:45 a.m.

Sustainability & Tuneable Adhesion

Networking

7:45 to 8:00 a.m. Announcement of 2021 Patrick Fellow, 2021 Peebles and Alan Gent Awards, 2021 Best Poster and the 2020 Distinguished Paper Award 8:00 – 8:45 a.m. Plenary Talk: Thoughts on the Future of Adhesive Technologies and Science from an Industry Insider

Chuck Paul, Henkel Corporation Session Chair: Eric Silverberg, Henkel Corporation

8:45 to 9:15 a.m.

Technical Sessions A

Break

Session Chairs: Grace Wan, Dow Chemical Company & Mitchell Rencheck, Purdue University

9:15 to 9:40 a.m.

Keynote

Sustainable Advances in Dow Adhesion Technology

Melinda Keefe, Dow

9:40 to 10:05 a.m.

Recyclable Lamination Film for Flexible Food Packaging

Yinzhong Guo, Dow Chemical Company

10:05 to 10:30 a.m.

Non-isocyanate Polyurethanes for Adhesives and Sealants

Jose Sintas, Arizona State University

10:30 to 10:55 a.m.

Adhesion and Bonding Improvements for 3D Printing of 100% Recycled Polyolefins

Dan Sameoto, University of Alberta

10:55 to 11:55 a.m.

BREAK

Sustainability & Tuneable Adhesion

Session Chair: Grace Wan, Dow Chemical Company

11:55 to 12:20 p.m.

Reversibly Assembled Microparticles for Sustained Applications on the Moon and Mars

Christopher Wohl, NASA Langley Research Center

12:20 to 12:45 p.m.

Decoupling the Mechanical and Electronic Contributions to Electroadhesion Using Ionoelastomers

Elayne Thomas, University of Massachusetts, Amherst

12:45 to 1:10 p.m.

Bridging Steady-State and Stick-Slip Fracture Propagation in Glassy Polymers Matteo Ciccotti, ESPCI Paris

1:10 to 2:05 p.m.

2:05 to 3:05 p.m.

BREAK

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

11 The Adhesion Society 2021

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Thursday, February 25 Technical Sessions B

Technical Sessions C

Formulation, Processing & Selection

Session Chairs: Ngon Tran, Army Research Laboratory & Anne Dussaud, Momentive

9:15 to 9:40 a.m.

Achieving Reliable Adhesion of Thermoplastic Non-Reactive Polymer to Glass

Indrani Bhattacharyya, Corning Research & Development Corporation

9:40 to 10:05 a.m.

Self-Adhesion at the Interface Between Two Polytetrafluoroethylene (PTFE) Films

Agathe Mocellin, Ecole Normale Supérieure Paris-Saclay

10:05 to 10:30 a.m.

Mechanical Properties and Decomposition Performance of Peelable Coatings

Kyung-Min Kim, Seoul National University

10:30 to 10:55 a.m.

OCA and Lamination Process for 3D Display Applications

Ryan Eismin, 3M Company

10:55 to 11:55 a.m.

Adhesion of Cells, Microorganisms and Viruses Session Chair: Mattia Bacca, University of British Columbia

11:55 a.m. to 12:20 p.m.

Keynote

10:05 to 10:30 a.m.

Receptor Dynamics During Adhesion and Spreading of Endothelial Cells

Matteo Arricca, DIMI, Università degli Studi di Brescia

10:30 to 10:55 a.m.

Quantifying the Adhesive Strength Between the SARS-CoV-2 S-Proteins and Human Receptor

Mauricio Ponga, University of British Columbia

10:55 to 11:55 a.m.

BREAK

Organismal

Form, Processing, Selection

Session Chair: Chris Campbell, 3M Company

9:40 to 10:05 a.m.

Contact Guidance of Adherent Cells

Vikram Deshpande, Cambridge University

BREAK

9:15 to 9:40 a.m.

Mechanism Study of Adhesion and Hemifusion of Liposomes

Tingting Zhu, Northeastern University

Session Chair: Mattia Bacca, University of British Columbia

11:55 a.m. to 12:20 p.m.

Effects of Filler and Adhesion Catalyst on Silicone Elastomer Interfacial Structure and Adhesion

Ting Lin, University of Michigan

A Theory for the Mechanical Control of SARS-CoV-2 Virus Endocytosis in the Presence of Capping Molecules – the Competition Between Membrane Rigidity and Caps Size

Mattia Bacca, University of British Columbia

12:20 to 12:45 p.m.

12:20 to 12:45 p.m.

Composition Adjustments to Drive Polymers – Wax Interactions In Hot Melt Adhesive Applications

Juan Tuberquia, Dow

Mussels Fabricate Hard and Flexible Composite Coatings from Immiscible Multiprotein Coacervates

Matthew James Harrington, McGill University

12:45 to 1:10 p.m.

Changes in Physical Properties of Adhesives in Environmental Tests

Yoshiyuki Kamo, Mitsubishi Electric Corp.

1:10 to 1:35 p.m.

12:45 to 1:10 p.m.

Adhesive Byssus Fibres of Freshwater Mussels Formed via Shear-induced Alpha to Beta Transition

Mimi Simmons, McGill University

Residual Stress Development During Curing of Structural Adhesives: Experimental Characterization and Modeling

Dave Lindeman & Sam Carpenter, 3M Company

1:10 to 1:35 p.m.

Comparative Analyses of Binary Patterning across Barnacle Cement Proteins Michael Wilson, U.S. Naval Research Laboratory

1:35 to 2:05 p.m.

1:35 to 2:05 p.m.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd. 44th Annual Meeting Final Program 12

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Thursday, February 25 Technical Sessions D

Technical Sessions E

Soft Technology (Robotics and Devices)

Adhesives in Transportation

Session Chairs: Keren Zhang, Facebook

9:15 to 9:40 a.m.

Aqueous Synthesis of Multiple Network Elastomers: Challenges and Perspectives

Victoria Waltz, ESPCI Paris, Université PSL

9:40 to 10:05 a.m.

Highly Conductive and Stretchable Liquid Metal Elastomer Thin Films for Multifunctional Electronics

A B M Tahidul Haque, Virginia Tech

10:05 to 10:30 a.m.

Switching Adhesion with Origami Mechanisms

Timothy Twohig, North Dakota State University

10:30 to 10:55 a.m.

UV Pattern Curing of Optically Clear Pressure-sensitive Adhesive for Flexible Display

Ji-soo Kim, Seoul National University

Session Chairs: Don Paquet, L&L Products & Frank Palmieri, NASA-LARC

10:55 to 11:55 a.m.

BREAK

Soft Technology (Robotics and Devices)

Keynote

Optoelectronic Sensing of the Deformation of Soft Robots, and their Electrohydraulic Power

Robert Shepherd, Cornell

Keynote

The Bonding System Approach - Characterizing and Controlling the System for Successful Structural Bonding

William Grace, Boeing Research and Technology

10:30 to 10:55 a.m.

Influence of Lap Shear Specimen Geometry on Environmental Aging of Adhesive Joints with Aluminum Adherends

Silke Golob, Universität der Bundeswehr München

10:55 to 11:55 a.m.

BREAK

Adhesives in Transportation

11:55 a.m. to 12:20 p.m.

12:20 to 12:45 p.m.

10:05 to 10:30 a.m.

Session Chairs: Keren Zhang, Facebook & Doug Hartley, Virginia Tech

Lightweight, Liquid Metal Elastomer Composite

Ethan Krings, University of Nebraska-Lincoln

9:40 to 10:05 a.m.

Secondary-Bonded Composite Structures with Co-Cure Reliability Using Epoxy Resins with Offset Stoichiometry

Frank Palmieri, NASA-LARC

Session Chairs: Hyun-Joong Chung, University of Alberta & Wanlian Shan, Syracuse Biomaterials Institute

9:15 to 9:40 a.m.

Role of Hyperbranched Polyethyleneimine in Affecting Properties of an Aerospace Resin System Used in Composite Applications

Ajay Krishnamurthy, National Institute of Standards & Technology

12:45 to 1:10 p.m.

Regenerative Electronics through Liquid Metal

Ravi Tej Anand Tutika, Iowa State University

11:55 a.m. to 12:20 p.m.

Development of Adhesion Tests on Asphalt for Permanent Pavement Marking (PPM) Paints

Hyungyung Jo, Purdue University

12:20 to 12:45 p.m.

A Novel Modular Test Configuration for 90º Peel Tests on Immovable Substrates

Jared Alexander Gohl, Purdue University

12:45 to 1:10 p.m.

Multi-phase Magnetic Elastomer Soft Composites

Edward Barron, Virginia Tech

Toughness and Elastic Improvement of Epoxy Composites by introducing Urethane-Modified Epoxy

Sim KyengBo, Seoul National University

1:10 to 1:35 p.m.

1:35 to 2:05 p.m.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd. 13 The Adhesion Society 2021

1:10 to 1:35 p.m.

Evaluating Temperature Dependence of CSR Toughened Epoxy Adhesive

Dooyoung Baek, Seoul National University

1:35 to 2:05 p.m.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

ALL TIMES LISTED IN THE PROGRAM ARE SHOWN IN CENTRAL TIME ZONE (GMT -6)

Thurs., Feb. 25 & Fri., Feb. 26 Technical Sessions F Fracture – Soft

Session Chairs: Amy Peterson, University of Massachusetts Lowell & Dan King, Hokkaido University

9:15 to 9:40 a.m.

From Dewetting to Adhesion Rupture - How Material Dissipation and Heterogeneities Affect Moving Line

Etienne Barthel, CNRS/Saint Gobain

9:40 to 10:05 a.m.

Mechano-fluorescent Insights on Elastomer Yielding

Jean Comtet, ESPCI

10:05 to 10:30 a.m.

Debonding Mechanisms of Unvulcanized Elastomers

Nassim Pujol, ESPCI

10:30 to 10:55 a.m.

Fast-healing Double-network Polydimethylsiloxane with Low Stiffness and High Toughness

Chao Chen, University of Massachusetts Amherst

Friday, February 26 Society Business 7:00 to 7:30 a.m. Adhesion Society Business Meeting 7:30 to 7:45 a.m.

Break

7:45 to 8:45 a.m. Division Meetings

• Bioadhesives Division • Soft Adhesives Division • Structural Adhesives Division

8:45 to 9:00 a.m.

Break

9:00 to 10:00 a.m. 2022 Planning Meeting

10:55 to 11:55 a.m.

BREAK

Fracture – Soft

Session Chairs: Amy Peterson, University of Massachusetts Lowell & Dan King, Hokkaido University

11:55 a.m. to 12:20 p.m.

Measuring the Elasticity and Fracture of Soft Gels via Cutting

Edwin Chan, NIST

12:20 to 12:45 p.m.

Piercing Soft Solids: A Mechanical Theory for Surface Rupture Stefano Fregonese, University of British Columbia

12:45 to 1:10 p.m.

Failure in Inhomogeneous Polymer Networks

Robert Riggleman, University of Pennsylvania

1:10 to 1:35 p.m.

Influence of Porosity on Mechanics at Different Physical Size Scales Christopher Barney, University of California Santa Barbara

1:35 to 2:05 p.m.

BREAK

2:05 to 3:05 p.m.

Networking & Exhibition

2021 Exhibitors • Anton Paar USA, Inc. • ASI Magazine • Kyowa Interface Science Co., Ltd.

44th Annual Meeting Final Program 14

Join Your Peers in

San Diego, California!

Adhesion Science & Technology

Adhesion Science & Technology

February 20-23, 2022

February 18-19, 2022

Exhibition

Short Course

For more information visit www.adhesionsociety.org