NEW: Stock program Type 110 Single flute gundrill with brazed carbide tip
Delivery time: 1 - 3 working days Version: Gundrill Type 110, according to customer – please see table Carbide grade: K15 Guide form: G Standard nose grind: SA-0001 (40º/30º) for drills Ø 3.0 mm and 4.0 mm SA-0002 (30º/20º) for drills Ø 5.0 mm up to 20.0 mm SA-0003 (20º/15º) for drills from Ø 22.0 mm
Drill-Ø 3.00 4.00 5.00 6.00 6.50 7.00 8.00 8.50 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 18.00 19.00 20.00 22.00 25.00
Flute length (mm) 155 240
440
540 1140
240
440
540
1440 1140
740 340 940
440
1140
1240
1440 1440
540
1240 740
1140
1440 1410
510
910 1410
The following standard drivers are available: Dimensions [mm] Ø 10 x 40 Ø 25 x 56 Ø 10 x 40 Ø 25 x 56 Ø 10 x 40 Ø 25 x 56
DIN DIN 6535 HA, cylindrical DIN 1835 B, Weldon DIN 1835 E, Whistle Notch
botek driver ZH10-40 ZH25-11 ZH10-11 ZH25-22 ZH10-20 ZH25-36
Please note: Over all length = Flute length + 5 mm + total length driver 21