Epoxy floors Ohio

Epoxy floors Ohio are commonly used in industrial and commercial flooring. Epoxy Floor Ohio is normally applied on top of concrete creating a high-performance, durable and smooth surface that can withstand heavy loads and last for many years. Many industrial facilities, warehouses, as well as commercial buildings, depend on epoxy floors Ohio because they are easy to clean and are safe for workers, inventory and equipment.

Before you apply the coating, make sure that the concrete surface is clean and semi-porous. It cannot bond on a covered or concrete which is polished. You must make sure that the concrete is fully cured and make sure that you search and repair holes which are on the concrete surface.

Also, you have to remove any available grease and oil.

In case that the concrete is old, conduct testing on the concrete surface to identify any previous layer covering the concrete surface.

Also, you have to make sure that the room temperature as recommended by the manufacturer. The unfavorable temperature will make the coating to bubble and peel.

Epoxy is a mixture of liquid and other chemicals and after the mixture, your time is limited, so you have to apply it quickly before it becomes stiff and hard.

It depends on the type of product that you are using; you might have to use an epoxy primer and finisher coat. You will add the primer just like normal paint, and you have to allow it to dry for several hours before applying the epoxy. In order to apply the primer, you have to cover the floor with a thin layer of water and then spread the primer evenly using a roller pin on a pole evenly on an entire floor.

They create a shiny-gloss floor surface adding more brightness inside your building.

It creates a hard layer that is durable and resistant to tear and wear capable of withstanding heavy loads and continuous traffic.

It is easy and quick to apply, does not require layout, cutting, extra chemicals or special equipment.

It lasts longer, and you can clean it easily.

It is the best option for warehouses and industries.

It is waterproof and stain resistant.

It gives offers you a choice to mix it with paint and colors so as to hide cracks and holes.

It is good for safety when mixed with anti-slip additives which make the floor surface a bit rough to prevent slipperily.

It decreases the maintenance cost since it does not require regular maintenance.