RTIRTI 244824482448 24482448-------2460 2460 2460 2460-24x48 610x1219 24602460 2460 24x48 610x1219 2460 2460 2460 30 96HIGHTOP UP UP 9 10 B C D 6 7 9.1 12 11.8 8 PRIVATE DINING 106 BISTRO 104 BAR 1 102 BOCCE LOUNGE 120 MEN'S RESTROOM 113 WOMEN'S RESTROOM 114 HALL 112 CHEF'S OFFICE 111 KITCHEN 110 BAR LOUNGE 101 ENTRY 100 PATIO EX-1 UTILITY CLOSET 103 30' - 0" 18' 9" 21' 3" 1' 0" 30' 0" 38' 0" 6' 6" 30'0" 30'0" 9 10 A B C D 2 4 5 6 7 1 9.1 12 11.8 8 A.9 SERVICE 216 BANQUET A 203 BANQUET B 202 BOWLING ALLEY 205 BOWLING SEATING 204 EVENT OFFICE 212 PREFUNCTION 200 FOH OFFICE 215 CORRIDOR 210 CORRIDOR 206 ELEV. MACHINE RM. 211 37' 0" 30' 0" 30' 0" 30' 0" 30' 0" 18' 9" 21' 3" 1' 0" 30' 0" 38' 0" 6' 6" 29'3 5/8" 5' 2 3/8" 30'0" 30'0" 163' 4 3/4" 33' 1 7/8" BAR 3 221 COVERED PATIO 220 CORRIDOR 222 64' 6 5/8" 16'1 3/4" WOMEN'S RESTROOM 214 MEN'S RESTROOM 213 ELEV. ELV-2 AV CLOSET 218 BAR 2 201 COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SHALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTION WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH TH ESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 3/32" = 1'-0" PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 OVERALL FLOOR PLANS 21096A1.00 N 3/32" = 1'-0" A1.00 1 OVERALL PLAN -LEVEL 01 3/32" = 1'-0" A1.00 2 OVERALL PLAN -LEVEL 02 I S S U E
RTIRTI CO2 BAG-N-BOX H 8 244824482448 24482448-------2460 2460 2460 2460 2460 D C C G D-FLOOR PLAN GENERAL NOTES: 1. REFER TO EQUIPMENT DRAWINGS FOR ROUGH-IN REQUIREMENTS OF KITCHEN EQUIPMENT 2. PROVIDE IN-WALL F.R.T. BLOCKING FOR MILLWORK, SHELVING, PANELS, ETC. REFER TO EQUIPMENT DRAWINGS FOR ADDITIONAL INFORMATION 3. ALL DIMENSIONS ARE NOMINAL AND ARE FROM FACE OF GYP BOARD. 4. ALL WOOD BLOCKING TO BE F.R.T. 5. MOUNT ALL FIXTURES AND ACCESSORIES AT HEIGHTS TO CONFORM TO ALL GOVERNING CODES AND ADA REQUIREMENTS 6. ALL CONTRACTORS TO VERIFY EXISTING SITE CONDITIONS BEFORE ANY WORK IS TO BEGIN. NOTIFY ARCHITECT OF DISCREPANCIES (TYPICAL) 7. COORDINATE OUTLETS AT MILLWORK (POWER,PHONE,ETC), WITH MILLWORKER AND ELECTRICAL DRAWINGS. PROVIDE SHOP DRAWINGS FOR REVIEW. 8. ALL OUTLET LOCATIONS (POWER,PHONE,ETC), TO BE VERIFIED WITH OWNER IN FIELD BEFORE INSTALLATION 9. ALL WORK IS TO BE COMPLETED IN ACCORDANCE WITH ALL GOVERNING STATE AND LOCAL CODES AND ORDINANCES 10. ALL BANQUETTES AND FURNISHINGS N.I.C. 11. REFER TO EQUIPMENT DRAWINGS, PLUMBING DRAWINGS, SEATING, AND FLOOR FINISH PLANS FOR FLOOR DRAINS AND DEPRESSED LOCATIONS 12. FIRE EXTINGUISHERS TO BE SUPPLIED AND INSTALLED BY THE G.C., QUANTITY AND LOCATIONS TO BE COORDINATED WITH FIRE MARSHAL 13. ALL WALLS IN KITCHEN FOOD PREPERATION AND SERVICE AREAS, BARS, AND TOILET ROOMS TO BE MOISTURE & MOLD RESISTANT GYP BOARD, DUROCK CEMENT BOARD (OR EQUAL), TO BE INSTALLED TO 4'-0 A.F.F. (FLUSH WITH GYP BD), WALLS BEHIND HOODS, AT DISHWASHING SCULLERY, AND IN MOP BASIN AREAS TO BE FULL HEIGHT CEMENT BOARD 14. ALL FLOORS IN KITCHEN FOOD PREPERATION AND SERVICE AREAS, BARS, AND TOILET ROOMS TO RECEIVE A WATERPROOF MEMBRANE, INSTALL ON FLOOR AND EXTEND 12" MIN. UP WALLS, CONTINUE 24" PAST ROOM ENTRYWAYS ON FLOOR IN ADJACENT SPACES, GC TO INSTALL THE WATERPROOFING MEMBRANE IN ACCORDANCE WITH THE LANDLORD'S SPECIFICATIONS, ALL FLOOR PIPE PENETRATIONS, CLEANOUTS AND FLOOR DRAINS MUST BE SEALED WATERTIGHT, WITH MEMBRANE AND FLASHING EXTENDING INTO CLAMPING COLLAR, PER MANUFACTURER'S SPECIFICAITONS 15. FIELD VERIFY THE REQUIRED FIRE EXTINGUISHER IS INSTALLED IN THE KITCHEN AND IS COMPATIBLE WITH THE AGENT IN THE FIXED SYSTEM 16. PROVIDE A FUSABLE LINK ABOVE EACH COOKING APPLIANCE OR WITHIN TWELVE INCHES OF THE ENTRANCE TO THE EXHAUST DUCT. 17. PROVIDE CONTAINMENT & CAPTURED TEST ON ALL KITCHEN HOODS 18. CLEAR CORNER GUARDS TO BE APPLIED WITH TAPE, HAVE 2-1/2" WINGS AND RUN FEET HIGH, LOCATIONS TO BE DETERMINED BY C. RAE INTERIORS, GC TO COORDINATE 19. RETURN GYPSUM BOARD ON WINDOW JAMBS, SILLS, AND HEADS TO THE STOREFRONT FRAME 20. ALL FLOORS IN WET AREAS TO BE TESTED DURING CONSTRUCTION DRAWING LEGEND: WALL TYPE, SEE SHEET A8.02 X DOOR NUMBER, SEE SHEET A8.01 1i STENCIL NOTE: FRONT DOOR TO HAVE HOURS INDICATED W/ STENCILS. GC. TO COORDINATE W/ OWNER AND LANDLORD PRIOR TO INSTALLATION BANQUET ROOM & PRIVATE DINING WINDOW TREATMENT NOTE: GC TO PROVIDE DRAPES (WINDOW COVERINGS) FOR ALL WINDOWS WITHIN THE BANQUET ROOMS AND PRIVATE DINING. WINDOW TREATMENTS TO BLOCK MOST LIGHT FROM ROOMS PRODUCT TBD, MANUFACTURER, PRODUCT LINE AND COLOR TO BE SELECTED BY C.RAE INTERIORS. MAINTAIN 12" OF CLEARANCE BETWEEN BOTTOM OF DRAPES AND TOP OF FLOOR MOUNTED HEATERS, GC TO COORDINATE. MAINTAIN CLEARANCE BETWEEN DRAPES AND AV SCREEN LOCATIONS, GC TO COORDINATE. FOOD PREPARATION NOTE: GC TO SEAL ALL GAPS IN EXCESS OF 1/32" IN ALL FOOD PREP AREAS, INCLUDING THE AREAS BEHIND ALL BARS, UNDER COUNTERS, AND THE INTERIOR OF ALL CABINETS BOOTH HEIGHTS, GC TO VERIFY WITH C. RAE INTERIORS PRIOR TO ORDER AND INSTALLATION: LARGE 'C' BOOTH: 36" HIGH 'U' SHAPED BOOTHS: 38" HIGH ISLAND BOOTH: 34" HIGH BAR LOUNGE BOOTHS: 30" HIGH LIBRARY 'L' BOOTH: 38" HIGH LIBRARY STRAIGHT BOOTH: 36" HIGH KEY PLAN N.I.C. LEVEL 01 LEVEL 02 9 10 B C D 6 7 1 A10.01 KITCHEN 110 A4.01 1 MEN'S RESTROOM 113 UTILITY CLOSET 103 CHEF'S OFFICE 111 ELEV. ELV-1 ENTRY STAIR STR-1 MONUMENTAL STAIR 2 STR-3 PATIO EX-1 HALL 112 6' 0" 1' 0" 11' 1/2" ENTRY 100 BAR 1 102 BAR LOUNGE 101 PRIVATE DINING 106 BOCCE LOUNGE 105 BISTRO 104 WOMEN'S RESTROOM 114 70" TV 70" TV 70" TV 70" TV 70" TVs EVENT FLAT SCREEN 9.1 T O C L 4' 1" 10'7" TO C.L. 70" TV 26 12 11.8 8 8' 4 1/2" 3' 0" 3' H. WEATHERING STEEL PLANTER ON PEDESTAL BY IRONWORKER (TYP.) 2' H. POWDER COATED STEEL RAILING (TYP., U.N.O.) 7' H. CUSTOM BLACKENED STEEL & WOOD SCREEN W/ CONTEMPORARY LASER CUT BIRCH TREES 4'-7" H. SCREEN CUSTOM BLACKENED STEEL W/ CONTEMPORARY LASER CUT BIRCH TREES HEATED UMBRELLA (ABOVE) TYP. OF 2 11 3/8" 30' 0" 18' 9" 21' 3" 1' 0" 30' 0" 38' 0" 6' 6" A4 B B B F A8.02 1 A8.06 1 1 1 1 2 9 9 3 3 41 40 MORISCA STONE VENEER 1 1 5 5 14 EXISTING SHELL EIFS A8.07 3 48' 7 3/4" 6 5/8" 6" 2'-6" H. WEATHERING STEEL PLANTER ON PEDESTAL BY IRONWORKER (TYP. OF 3) 2' 0" 2' 0" 8' 11" 2' 0" 4'9" 24' 2 1/4" 2'0" 2'-3" H. WEATHERING STEEL PLANTER ON PEDESTAL BY IRONWORKER (TYP. U.N.O.) 5'0" 23 18 23 18 23 18 23 18 20 19 19 19 19 19 19 14 14 13 13 13 13 13 13 13 13 13 14 14 54 6 2 12 13 14 14 14 3 3 23 18 70" TV 23 18 113 114 111 5 12 17 55 6'6" 12' 0" 1'5 3/8" 6 5/8" 14' 10" 7 1/4" 13' 4 7/8" 7 1/4" 117' 8 1/2" EQ EQ 21 19'11 3/8" 84'5 1/8" 9' 5 7/8" 14'4" 6'3" 10'11 3/8" 7 1/4" 25'4 3/4" 9'11" 7 1/4" 9'10 1/2" 4 7/8" 3' 4" 31' 8" +/4' 6 1/4" 1' 1/8" +/- 20' 7 1/2" 2' - 0" 6' 5 1/4" 7 1/4" 6' - 10 5/8" 7' 11 3/8" 7 1/4" 12'3 1/8" 7 1/4" 26'0 3/4" B B1 B B1 B B B B1 B1 B A5 B A7 B B A A F F F F F2 F2 F2 F1 F2 B1 7' 11 1/2" 1/4" 3' 6 3/8" 30' 3" 5' 9" 34' 0 1/2" 14' 3/8" 3' 1 3/4" A4.1 5' 8" 3'2 3/8" 7' 10 3/4" 9' 8 1/4" 7 1/4" B 12 13 7' 10 3/4" 30' 0" 30' 0" 16' 5 3/8" 37' 4 3/8" 46' 11 3/4" 60 53 53 53 42 48 9' 7 1/2" 5' 1/2" 10' 7 3/8" 4' 0" 22 72 11' 0" A5.02 3 A5.01 2 1 MENU SCREEN 39 58' 7/8" +/ALIGN W/ EDGE OF SOFFIT ABOVE 15' 1/2" +/- 43' 11 1/8" +/A5.02 1 2 A5.01 3 1' 9 5/8" 2'5" 2' 0" A4.01 4 A4.01 3 10' - 10" 3' 6 1/2" 3' 6 1/2" 3' 6 1/2" EQEQ 2" 7' 11"2' 3 3/8" F1.01 1 23 18 A8.03 1 C3 A A8.05 1 WINE CLOSET 107 A11.01 4 7' 11"3' 0"3'9"5'6 1/2" 1' 1 3/4" A 18 7 4 8 4 3 42 3 ALIGN W/ EDGE OF SOFFIT ABOVE 23' 9 1/4" +/2'6" 4'0" EX104 8 3/4" 5' - 0 1/4" 9' 9"14' 0" 103 100 4'4 1/4" 5' 3" 2280b A2 A4.1 3 3'11" 11'0" 2' 3 1/2" 9' 11" 1' 7" 6 1/2" IN GROUND LIGHT FOR CORKSCREW - SEE ELEC. DWGS A8.09 3 1' 1 3/4" PATIO TO BE LEVEL W/ THE EXCEPTION OF SLOPE AWAY FROM THE BUILDING FOR DRAINAGE COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SHALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTION WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH TH ESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 As indicated PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 LEVEL 01 FLOOR PLAN 21096 RDLA A1.01 6027" H. DECORATIVE METAL RAILING BELOW STAIR WHERE < 6'-8" HEADROOM CLEARANCE OCCURS. VERIFY FINAL LOCATION IN FIELD W/ DIAGONAL BRACE. 68GYP. BD. TO BE INSTALLED ON INSIDE FACE OF ALL EXTERIOR WALLS, TYP. 72SEE-THROUGH FIREPLACE ST-60-EH AS MFR. BY FLARE FIREPLACES OR OWNER APPROVED EQUAL, FURNISHED BY PINSTRIPES & INSTALLED BY LL. LL TO PROVIDE GAS LINE. 21LOCATION OF DECORATIVE PEACOCK/FROG/OWL STATUE, OUTLET TO BE PROVIDED BY LL. 22PIZZA OVEN 23OVERHEAD/WALL MTD. TELEVISION BRACKET SUPPORT 25SLIDING PARTITION WALL, REFER TO SPECIFICATIONS 26IRON VINE PANEL LOCATION, SET IN FRONT OF WINDOW, REFER TO INTERIOR ELEVATIONS AND DETAILS 29BAR WALL. REFER TO DETAILS ON A5.06/7. PLAM AND STONE FINISHES OCCUR. GC TO COORDINATE. 30WAIT STATION 39DRINK RAIL, REFER TO MILLWORK DRAWINGS 40EXTERIOR FOUNTAIN. GC TO COORDINATE UTILITIES AS REQUIRED PRIOR TO INSTALLATION. 41CORKSCREW STATUE. REFER TO STRUCTURAL FOR ATTACHMENT. 42EXISTING FIXED STOREFRONT SYSTEM 43AV SCREEN, ABOVE 47NOT USED 48INTERIOR WINDOW SYSTEM W/ TEMPERED GLAZING AND WOOD TRIM. TRIM BY MILLWORKER. 53NOT USED 54FRONT DESK, REFER TO MILLWORK PACKAGE 55STAIR BUFFET, REFER TO MILLWORK PACKAGE 57BANQUET ENTRY, REFER TO MILLWORK PACKAGE 1BOOTH AND TABLE BY OWNER 2FURNITURE BY OWNER 3P.O.S. STATION, GC TO COORDINATE DATA AND ELECTRICAL OUTLETS WITH OWNER 4PRINTER LOCATION 5KITCHEN EQUIPMENT HOODS. REFER TO FSE AND MEP DWGS. 6STONE COUNTER 7ELEVATOR, FINISHES TO BE DETERMINED BY C. RAE INTERIORS 8REFRIGERATED WINE UNIT 9BOCCE COURT GUARDRAILS 11BOWLING PINSETTERS 12BEER AND SODA LINES, SEAL PENETRATIONS, REFER TO PLUMBING DRAWINGS. FUR OUT WALL AS REQUIRED TO FULLY CONCEAL WHEN LOCATED IN WALL 13FLOOR DRAIN, REFER TO KITCHEN & PLUMBING DRAWINGS 14FLOOR SINK, REFER TO KITCHEN AND PLUMBING DRAWINGS 15SCORING PEDESTAL, BALL RACK AND BOWLING FURNITURE 16MASKING UNIT AND CURTAIN WALL 17ADA COUNTER 18DATA AND PHONE OUTLETS, GC TO COORDINATE WITH OWNER AND ELECTRICAL DWGS. 19HAND SINK 20MOP SINK, REFER TO PLUMBING DRAWINGS X FLOOR PLAN KEY NOTES N NOTE: - ALL EXISTING COLUMNS HAVE FIRE PROOF SPRAY - OR INTUMESCENT PAINT. GC TO PROTECT AS REQUIRED DURING CONSTRUCTION. - ALL COLUMNS WITHIN THE SPACE THAT HAVE FIRE PROOF SPRAY ARE TO RECIEVE A GYP. BD. ENCLOSURE. REFER TO NOTES FOR HEIGHTS AND ADDITIONAL CLADDING (TILE). 1/8" = 1'-0" A1.01 1 LEVEL 01 FLOOR PLAN I S S U E
UP WATER HEATER LOCATION 3 24x48 610x1219 DD C TRASH 24602460 2460 24x48 610x1219 2460 4 2460 2460 UP UP FLOOR PLAN GENERAL NOTES: 1. REFER TO EQUIPMENT DRAWINGS FOR ROUGH-IN REQUIREMENTS OF KITCHEN EQUIPMENT 2. PROVIDE IN-WALL F.R.T. BLOCKING FOR MILLWORK, SHELVING, PANELS, ETC. REFER TO EQUIPMENT DRAWINGS FOR ADDITIONAL INFORMATION 3. ALL DIMENSIONS ARE NOMINAL AND ARE FROM FACE OF GYP BOARD. 4. ALL WOOD BLOCKING TO BE F.R.T. 5. MOUNT ALL FIXTURES AND ACCESSORIES AT HEIGHTS TO CONFORM TO ALL GOVERNING CODES AND ADA REQUIREMENTS 6. ALL CONTRACTORS TO VERIFY EXISTING SITE CONDITIONS BEFORE ANY WORK IS TO BEGIN. NOTIFY ARCHITECT OF DISCREPANCIES (TYPICAL) 7. COORDINATE OUTLETS AT MILLWORK (POWER,PHONE,ETC), WITH MILLWORKER AND ELECTRICAL DRAWINGS. PROVIDE SHOP DRAWINGS FOR REVIEW. 8. ALL OUTLET LOCATIONS (POWER,PHONE,ETC), TO BE VERIFIED WITH OWNER IN FIELD BEFORE INSTALLATION 9. ALL WORK IS TO BE COMPLETED IN ACCORDANCE WITH ALL GOVERNING STATE AND LOCAL CODES AND ORDINANCES 10. ALL BANQUETTES AND FURNISHINGS N.I.C. 11. REFER TO EQUIPMENT DRAWINGS, PLUMBING DRAWINGS, SEATING, AND FLOOR FINISH PLANS FOR FLOOR DRAINS AND DEPRESSED LOCATIONS 12. FIRE EXTINGUISHERS TO BE SUPPLIED AND INSTALLED BY THE G.C., QUANTITY AND LOCATIONS TO BE COORDINATED WITH FIRE MARSHAL 13. ALL WALLS IN KITCHEN FOOD PREPERATION AND SERVICE AREAS, BARS, AND TOILET ROOMS TO BE MOISTURE & MOLD RESISTANT GYP BOARD, DUROCK CEMENT BOARD (OR EQUAL), TO BE INSTALLED TO 4'-0 A.F.F. (FLUSH WITH GYP BD), WALLS BEHIND HOODS, AT DISHWASHING SCULLERY, AND IN MOP BASIN AREAS TO BE FULL HEIGHT CEMENT BOARD 14. ALL FLOORS IN KITCHEN FOOD PREPERATION AND SERVICE AREAS, BARS, AND TOILET ROOMS TO RECEIVE A WATERPROOF MEMBRANE, INSTALL ON FLOOR AND EXTEND 12" MIN. UP WALLS, CONTINUE 24" PAST ROOM ENTRYWAYS ON FLOOR IN ADJACENT SPACES, GC TO INSTALL THE WATERPROOFING MEMBRANE IN ACCORDANCE WITH THE LANDLORD'S SPECIFICATIONS, ALL FLOOR PIPE PENETRATIONS, CLEANOUTS AND FLOOR DRAINS MUST BE SEALED WATERTIGHT, WITH MEMBRANE AND FLASHING EXTENDING INTO CLAMPING COLLAR, PER MANUFACTURER'S SPECIFICAITONS 15. FIELD VERIFY THE REQUIRED FIRE EXTINGUISHER IS INSTALLED IN THE KITCHEN AND IS COMPATIBLE WITH THE AGENT IN THE FIXED SYSTEM 16. PROVIDE A FUSABLE LINK ABOVE EACH COOKING APPLIANCE OR WITHIN TWELVE INCHES OF THE ENTRANCE TO THE EXHAUST DUCT. 17. PROVIDE CONTAINMENT & CAPTURED TEST ON ALL KITCHEN HOODS 18. CLEAR CORNER GUARDS TO BE APPLIED WITH TAPE, HAVE 2-1/2" WINGS AND RUN 4 FEET HIGH, LOCATIONS TO BE DETERMINED BY C. RAE INTERIORS, GC TO COORDINATE 19. RETURN GYPSUM BOARD ON WINDOW JAMBS, SILLS, AND HEADS TO THE STOREFRONT FRAME 20. ALL FLOORS IN WET AREAS TO BE TESTED DURING CONSTRUCTION DRAWING LEGEND: WALL TYPE, SEE SHEET A8.02 X DOOR NUMBER, SEE SHEET A8.01 1i STENCIL NOTE: FRONT DOOR TO HAVE HOURS INDICATED W/ STENCILS. GC. TO COORDINATE W/ OWNER AND LANDLORD PRIOR TO INSTALLATION BANQUET ROOM & PRIVATE DINING WINDOW TREATMENT NOTE: GC TO PROVIDE DRAPES (WINDOW COVERINGS) FOR ALL WINDOWS WITHIN THE BANQUET ROOMS AND PRIVATE DINING. WINDOW TREATMENTS TO BLOCK MOST LIGHT FROM ROOMS PRODUCT TBD, MANUFACTURER, PRODUCT LINE AND COLOR TO BE SELECTED BY C.RAE INTERIORS. MAINTAIN 12" OF CLEARANCE BETWEEN BOTTOM OF DRAPES AND TOP OF FLOOR MOUNTED HEATERS, GC TO COORDINATE. MAINTAIN CLEARANCE BETWEEN DRAPES AND AV SCREEN LOCATIONS, GC TO COORDINATE. FOOD PREPARATION NOTE: GC TO SEAL ALL GAPS IN EXCESS OF 1/32" IN ALL FOOD PREP AREAS, INCLUDING THE AREAS BEHIND ALL BARS, UNDER COUNTERS, AND THE INTERIOR OF ALL CABINETS BOOTH HEIGHTS, GC TO VERIFY WITH C. RAE INTERIORS PRIOR TO ORDER AND INSTALLATION: LARGE 'C' BOOTH: 36" HIGH 'U' SHAPED BOOTHS: 38" HIGH ISLAND BOOTH: 34" HIGH BAR LOUNGE BOOTHS: 30" HIGH LIBRARY 'L' BOOTH: 38" HIGH LIBRARY STRAIGHT BOOTH: 36" HIGH KEY PLAN N.I.C. LEVEL 01 LEVEL 02 A B C D 2 4 5 6 7 1 1 A10.01 CORRIDOR 206 BOWLING SEATING 204 BOWLING ALLEY 205 SERVICE 216 15'0" 4' 1 1/4" UP BANQUET B 202 BANQUET A 203 5'5 1/2" OPEN TO BELOW STORAGE 217 PLATFORM LIFTGARAVENTA GENESIS OPAL OP 90 EVENT OFFICE 212 HOLD 4'0" MEN'S RESTROOM 213 ELEV. MACHINE RM. 211 ELEV. ELV-2 MONUMENTAL STAIR STR-4 BAR 2 201 PREFUNCTION 200 70" TV 70" TV 75" TV 75" TV 70" TV CORRIDOR 210 FOH OFFICE 215 4' 0" 5' 1" 7 1/4" 7' - 11 1/2" 20' 6 1/4" 7 1/4" 16' - 10" 7 1/4" 8' - 6" 3 1/8" 61' 0 3/4" WOMEN'S RESTROOM 214 A8.02 1 A8.07 4 A8.07 7 A8.07 8 METAL STAIR, REFER TO STRUCTURAL DWGS. METAL STAIR, REFER TO STRUCTURAL DWGS. 14 20 5 3/8" 37' 0" 30' 0" 30' 0" 30' 0" 30' 0" 5' 10 3/4" A4.01 2 30'0" 30'0" 34'6" 1' 0" 163' - 4 1/8" 95' 9 3/8" 202B EX206 EX200 EX-221 203A 202A 212 203B 210 215 216A 213 A5 A5 B A5 A5 A5 A5 A5 B B1 B F1 B B B A5.1 A5.1 B A5 B B B B B B A B F2 F2 F1 F1 B1 B B B B1 A6P B B1 A6P 17' 3" 7 1/4" 24' 9 1/8" 30' 0 1/8" 7 1/4" 72' 9 3/8" 3'9 1/4" 11 5/8" A5.04 4 1 2 3 A5.05 2 1 A5.03 3 A5.03 2 A5.03 4 A5.03 1 AV CLOSET 218 F1 TYP. TYP. B 217 TYP. TYP. TYP. TYP. TYP. TYP. TYP. TYP. F1 4 3 2 B 2' 0" +/2' 2" +/2' 0" +/2'0" +/7' 0" 15' 1/4"5' 9 1/4"6' 1/2"19' 8 7/8"5' 9 1/4" 3' 9" 6 5/8"9' 1 1/4"5' 6" A11.04 1 42" TV A8.04 3 A8.08 7 A8.09 1 4 4 7 16 3 3 3 A8.08 2 V.I.F. 3'0 1/2" +/V.I.F. 8' 0" +/-2'5" 6" MIN. 2'10" +/1' 10" +/2'10" +/1' 10" +/3' 3/4" EQ EQ 1'1 1/2"7'5 1/8"3'4 1/4"9' 0"4'8 1/4"5'9 1/2"4'6 3/8"11'1"3'3 1/4"11'1"18'1 1/2" 2' 2" 11 11 11 11 11 11 11 11 11 11 11 11 2 3'0" 43 43 57 57 15 15 15 15 15 15 202C 6 18 30 14 14 EQEQ 4' 3 3/8"4'4"7' 0"3' 0"4' 4" 6 6 6 6 25 23 18 23 18 23 18 23 18 23 18 23 18 70" TV 23 18 EQEQEQ EQEQEQ 1' 6" c201g A8.09 2 EXISTING LANDLORD FINISH TO REMAIN LEASE LINE 17 14 19 14 14 68 68 68 8' 11 3/4"38' 9 3/4"7' 0 1/4" R 5 00 6 6 29 48 48 48 48 4' 0" 9' 1 1/4" B1 B1 A2 19 2'8" 1'10" 4' 0" 8' 11"31' 10" 9'4 1/2" 10" 79'5 3/4" STOREFRONT BY LANDLORD S T O R E F R O N T B Y L A N D L O R D 16'10 3/8" +/EXISTING 107' 11 3/4" 7 1/4" 54' 9 3/4" 33'6 7/8"7 1/4"55' 4 7/8" 16'10 1/4" 7 1/4" 72' 8 5/8" A5.1 75 3/4 + /16'10 1/4" 2' 7 1/2" 29' 11 5/8" +/4' 0" CLOSET 219B CLOSET 219A COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SHALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTION WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH TH ESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 As indicated PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 LEVEL 02 FLOOR PLAN - NORTH 21096 Checker A1.02 6027" H. DECORATIVE METAL RAILING BELOW STAIR WHERE < 6'-8" HEADROOM CLEARANCE OCCURS. VERIFY FINAL LOCATION IN FIELD W/ DIAGONAL BRACE. 68GYP. BD. TO BE INSTALLED ON INSIDE FACE OF ALL EXTERIOR WALLS, TYP. 72SEE-THROUGH FIREPLACE ST-60-EH AS MFR. BY FLARE FIREPLACES OR OWNER APPROVED EQUAL, FURNISHED BY PINSTRIPES & INSTALLED BY LL. LL TO PROVIDE GAS LINE. 21LOCATION OF DECORATIVE PEACOCK/FROG/OWL STATUE, OUTLET TO BE PROVIDED BY LL. 22PIZZA OVEN 23OVERHEAD/WALL MTD. TELEVISION BRACKET SUPPORT 25SLIDING PARTITION WALL, REFER TO SPECIFICATIONS 26IRON VINE PANEL LOCATION, SET IN FRONT OF WINDOW, REFER TO INTERIOR ELEVATIONS AND DETAILS 29BAR WALL. REFER TO DETAILS ON A5.06/7. PLAM AND STONE FINISHES OCCUR. GC TO COORDINATE. 30WAIT STATION 39DRINK RAIL, REFER TO MILLWORK DRAWINGS 40EXTERIOR FOUNTAIN. GC TO COORDINATE UTILITIES AS REQUIRED PRIOR TO INSTALLATION. 41CORKSCREW STATUE. REFER TO STRUCTURAL FOR ATTACHMENT. 42EXISTING FIXED STOREFRONT SYSTEM 43AV SCREEN, ABOVE 47NOT USED 48INTERIOR WINDOW SYSTEM W/ TEMPERED GLAZING AND WOOD TRIM. TRIM BY MILLWORKER. 53NOT USED 54FRONT DESK, REFER TO MILLWORK PACKAGE 55STAIR BUFFET, REFER TO MILLWORK PACKAGE 57BANQUET ENTRY, REFER TO MILLWORK PACKAGE 1BOOTH AND TABLE BY OWNER 2FURNITURE BY OWNER 3P.O.S. STATION, GC TO COORDINATE DATA AND ELECTRICAL OUTLETS WITH OWNER 4PRINTER LOCATION 5KITCHEN EQUIPMENT HOODS. REFER TO FSE AND MEP DWGS. 6STONE COUNTER 7ELEVATOR, FINISHES TO BE DETERMINED BY C. RAE INTERIORS 8REFRIGERATED WINE UNIT 9BOCCE COURT GUARDRAILS 11BOWLING PINSETTERS 12BEER AND SODA LINES, SEAL PENETRATIONS, REFER TO PLUMBING DRAWINGS. FUR OUT WALL AS REQUIRED TO FULLY CONCEAL WHEN LOCATED IN WALL 13FLOOR DRAIN, REFER TO KITCHEN & PLUMBING DRAWINGS 14FLOOR SINK, REFER TO KITCHEN AND PLUMBING DRAWINGS 15SCORING PEDESTAL, BALL RACK AND BOWLING FURNITURE 16MASKING UNIT AND CURTAIN WALL 17ADA COUNTER 18DATA AND PHONE OUTLETS, GC TO COORDINATE WITH OWNER AND ELECTRICAL DWGS. 19HAND SINK 20MOP SINK, REFER TO PLUMBING DRAWINGS NOTE: - ALL EXISTING COLUMNS HAVE FIRE PROOF SPRAY. GC TO PROTECT AS REQUIRED DURING CONSTRUCTION. - ALL COLUMNS WITHIN THE SPACE ARE TO RECIEVE A GYP. BD. ENCLOSURE. REFER TO NOTES FOR HEIGHTS AND ADDITIONAL CLADDING (TILE). X FLOOR PLAN KEY NOTES N 1/8" = 1'-0" A1.02 1 LEVEL 02 FLOOR PLAN -NORTH I S S U E
30x96HIGHTOP 9 10 B C 1 A10.01 COVERED PATIO 220 V.I.F. 6' 0" +/V I F 5' 0 1/2" +/CORRIDOR 222 BAR 3 221 ENTRY STAIR STR-2 9.1 75"/80" TV 75"/80" TV 85"+ TV 85"+ TV 12 11.8 A.9 A8.06 2 16'2 3/8" 30'0" 5'2 3/8" 12'10 7/8" 64'3 5/8" 11 3/8" 1' 0" 30' 0" 38' 0" 6' 6" 1' 3 1/4" 5'0" 19' 7 1/2" 10' 10" 2'8 1/2" 13' - 0 5/8" 10' 6" 7' 1/2" V.I.F. 23' 5 3/4" +/V.I.F. 22' 9" +/- 4 3/4" A5.1 F1 F1 F1 F1 F1 F1 F2 F2 F2 F2 F2 F2 F2 F1 V.I.F. 13' 0 5/8" +/V.I.F. 5' - 0 1/8" +/V.I.F. 2' 1/8" +/V.I.F. 10' 8 1/2" +/V.I.F. 5' - 0 1/8" +/V I F 5' 0 1/8" +/V.I.F. 18' 0 3/4" +/V.I.F. 18' 11 1/4" +/V.I.F. 40' 3 7/8" +/45' 9" F2 77' 5/8" 3 3 9 9 12 14 14 23 18 23 18 23 18 39 A5.06 1 2 3 A5.1 A8.04 2 TYP. 1' 10" +/2' 10" +/4' 11 3/4" 9'4 3/4" 15'8 3/4" 7' 11" 3' 4" +/1'6 1/4" +/1250c2 1250c1 TYP. 2' 1 3/4" 2' 1 3/4" 2 29 FLOOR PLAN GENERAL NOTES: 1. REFER TO EQUIPMENT DRAWINGS FOR ROUGH-IN REQUIREMENTS OF KITCHEN EQUIPMENT 2. PROVIDE IN-WALL F.R.T. BLOCKING FOR MILLWORK, SHELVING, PANELS, ETC. REFER TO EQUIPMENT DRAWINGS FOR ADDITIONAL INFORMATION 3. ALL DIMENSIONS ARE NOMINAL AND ARE FROM FACE OF GYP BOARD. 4. ALL WOOD BLOCKING TO BE F.R.T. 5. MOUNT ALL FIXTURES AND ACCESSORIES AT HEIGHTS TO CONFORM TO ALL GOVERNING CODES AND ADA REQUIREMENTS 6. ALL CONTRACTORS TO VERIFY EXISTING SITE CONDITIONS BEFORE ANY WORK IS TO BEGIN. NOTIFY ARCHITECT OF DISCREPANCIES (TYPICAL) 7. COORDINATE OUTLETS AT MILLWORK (POWER,PHONE,ETC), WITH MILLWORKER AND ELECTRICAL DRAWINGS. PROVIDE SHOP DRAWINGS FOR REVIEW. 8. ALL OUTLET LOCATIONS (POWER,PHONE,ETC), TO BE VERIFIED WITH OWNER IN FIELD BEFORE INSTALLATION 9. ALL WORK IS TO BE COMPLETED IN ACCORDANCE WITH ALL GOVERNING STATE AND LOCAL CODES AND ORDINANCES 10. ALL BANQUETTES AND FURNISHINGS N.I.C. 11. REFER TO EQUIPMENT DRAWINGS, PLUMBING DRAWINGS, SEATING, AND FLOOR FINISH PLANS FOR FLOOR DRAINS AND DEPRESSED LOCATIONS 12. FIRE EXTINGUISHERS TO BE SUPPLIED AND INSTALLED BY THE G.C., QUANTITY AND LOCATIONS TO BE COORDINATED WITH FIRE MARSHAL 13. ALL WALLS IN KITCHEN FOOD PREPERATION AND SERVICE AREAS, BARS, AND TOILET ROOMS TO BE MOISTURE & MOLD RESISTANT GYP BOARD, DUROCK CEMENT BOARD (OR EQUAL), TO BE INSTALLED TO 4'A.F.F. (FLUSH WITH GYP BD), WALLS BEHIND HOODS, AT DISHWASHING SCULLERY, AND IN MOP BASIN AREAS TO BE FULL HEIGHT CEMENT BOARD 14. ALL FLOORS IN KITCHEN FOOD PREPERATION AND SERVICE AREAS, BARS, AND TOILET ROOMS TO RECEIVE A WATERPROOF MEMBRANE, INSTALL ON FLOOR AND EXTEND 12" MIN. UP WALLS, CONTINUE 24" PAST ROOM ENTRYWAYS ON FLOOR IN ADJACENT SPACES, GC TO INSTALL THE WATERPROOFING MEMBRANE IN ACCORDANCE WITH THE LANDLORD'S SPECIFICATIONS, ALL FLOOR PIPE PENETRATIONS, CLEANOUTS AND FLOOR DRAINS MUST BE SEALED WATERTIGHT, WITH MEMBRANE AND FLASHING EXTENDING INTO CLAMPING COLLAR, PER MANUFACTURER'S SPECIFICAITONS 15. FIELD VERIFY THE REQUIRED FIRE EXTINGUISHER IS INSTALLED IN THE KITCHEN AND IS COMPATIBLE WITH THE AGENT IN THE FIXED SYSTEM 16. PROVIDE A FUSABLE LINK ABOVE EACH COOKING APPLIANCE OR WITHIN TWELVE INCHES OF THE ENTRANCE TO THE EXHAUST DUCT. 17. PROVIDE CONTAINMENT & CAPTURED TEST ON ALL KITCHEN HOODS 18. CLEAR CORNER GUARDS TO BE APPLIED WITH TAPE, HAVE -1/2" WINGS AND RUN 4 FEET HIGH, LOCATIONS TO BE DETERMINED BY C. RAE INTERIORS, GC TO COORDINATE 19. RETURN GYPSUM BOARD ON WINDOW JAMBS, SILLS, AND HEADS TO THE STOREFRONT FRAME 20. ALL FLOORS IN WET AREAS TO BE TESTED DURING CONSTRUCTION DRAWING LEGEND: WALL TYPE, SEE SHEET A8.02 X DOOR NUMBER, SEE SHEET A8.01 1i STENCIL NOTE: FRONT DOOR TO HAVE HOURS INDICATED W/ STENCILS. GC. TO COORDINATE W/ OWNER AND LANDLORD PRIOR TO INSTALLATION BANQUET ROOM & PRIVATE DINING WINDOW TREATMENT NOTE: GC TO PROVIDE DRAPES (WINDOW COVERINGS) FOR ALL WINDOWS WITHIN THE BANQUET ROOMS AND PRIVATE DINING. WINDOW TREATMENTS TO BLOCK MOST LIGHT FROM ROOMS PRODUCT TBD, MANUFACTURER, PRODUCT LINE AND COLOR TO BE SELECTED BY C.RAE INTERIORS. MAINTAIN 12" OF CLEARANCE BETWEEN BOTTOM OF DRAPES AND TOP OF FLOOR MOUNTED HEATERS, GC TO COORDINATE. MAINTAIN CLEARANCE BETWEEN DRAPES AND AV SCREEN LOCATIONS, GC TO COORDINATE. FOOD PREPARATION NOTE: GC TO SEAL ALL GAPS IN EXCESS OF 1/32" IN ALL FOOD PREP AREAS, INCLUDING THE AREAS BEHIND ALL BARS, UNDER COUNTERS, AND THE INTERIOR OF ALL CABINETS BOOTH HEIGHTS, GC TO VERIFY WITH C. RAE INTERIORS PRIOR TO ORDER AND INSTALLATION: LARGE 'C' BOOTH: 36" HIGH 'U' SHAPED BOOTHS: 38" HIGH ISLAND BOOTH: 34" HIGH BAR LOUNGE BOOTHS: 30" HIGH LIBRARY 'L' BOOTH: 38" HIGH LIBRARY STRAIGHT BOOTH: 36" HIGH KEY PLAN N.I.C. LEVEL 01 LEVEL 02 COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SHALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTION WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH TH ESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 As indicated PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 LEVEL 02 FLOOR PLAN - SOUTH 21096 Checker A1.03 6027" H. DECORATIVE METAL RAILING BELOW STAIR WHERE 6'-8" HEADROOM CLEARANCE OCCURS. VERIFY FINAL LOCATION IN FIELD W/ DIAGONAL BRACE. 68GYP. BD. TO BE INSTALLED ON INSIDE FACE OF ALL EXTERIOR WALLS, TYP. 72SEE-THROUGH FIREPLACE ST-60-EH AS MFR. BY FLARE FIREPLACES OR OWNER APPROVED EQUAL, FURNISHED BY PINSTRIPES & INSTALLED BY LL. LL TO PROVIDE GAS LINE. 21LOCATION OF DECORATIVE PEACOCK/FROG/OWL STATUE, OUTLET TO BE PROVIDED BY LL. 22PIZZA OVEN 23OVERHEAD/WALL MTD. TELEVISION BRACKET SUPPORT 25SLIDING PARTITION WALL, REFER TO SPECIFICATIONS 26IRON VINE PANEL LOCATION, SET IN FRONT OF WINDOW, REFER TO INTERIOR ELEVATIONS AND DETAILS 29BAR WALL. REFER TO DETAILS ON A5.06/7. PLAM AND STONE FINISHES OCCUR. GC TO COORDINATE. 30WAIT STATION 39DRINK RAIL, REFER TO MILLWORK DRAWINGS 40EXTERIOR FOUNTAIN. GC TO COORDINATE UTILITIES AS REQUIRED PRIOR TO INSTALLATION. 41CORKSCREW STATUE. REFER TO STRUCTURAL FOR ATTACHMENT. 42EXISTING FIXED STOREFRONT SYSTEM 43AV SCREEN, ABOVE 47NOT USED 48INTERIOR WINDOW SYSTEM W/ TEMPERED GLAZING AND WOOD TRIM. TRIM BY MILLWORKER. 53NOT USED 54FRONT DESK, REFER TO MILLWORK PACKAGE 55STAIR BUFFET, REFER TO MILLWORK PACKAGE 57BANQUET ENTRY, REFER TO MILLWORK PACKAGE 1BOOTH AND TABLE BY OWNER 2FURNITURE BY OWNER 3P.O.S. STATION, GC TO COORDINATE DATA AND ELECTRICAL OUTLETS WITH OWNER 4PRINTER LOCATION 5KITCHEN EQUIPMENT HOODS. REFER TO FSE AND MEP DWGS. 6STONE COUNTER 7ELEVATOR, FINISHES TO BE DETERMINED BY C. RAE INTERIORS 8REFRIGERATED WINE UNIT 9BOCCE COURT GUARDRAILS 11BOWLING PINSETTERS 12BEER AND SODA LINES, SEAL PENETRATIONS, REFER TO PLUMBING DRAWINGS. FUR OUT WALL AS REQUIRED TO FULLY CONCEAL WHEN LOCATED IN WALL 13FLOOR DRAIN, REFER TO KITCHEN & PLUMBING DRAWINGS 14FLOOR SINK, REFER TO KITCHEN AND PLUMBING DRAWINGS 15SCORING PEDESTAL, BALL RACK AND BOWLING FURNITURE 16MASKING UNIT AND CURTAIN WALL 17ADA COUNTER 18DATA AND PHONE OUTLETS, GC TO COORDINATE WITH OWNER AND ELECTRICAL DWGS. 19HAND SINK 20MOP SINK, REFER TO PLUMBING DRAWINGS NOTE: - ALL EXISTING COLUMNS HAVE FIRE PROOF SPRAY. GC TO PROTECT AS REQUIRED DURING CONSTRUCTION. - ALL COLUMNS WITHIN THE SPACE ARE TO RECEIVE A GYP. BD. ENCLOSURE (U.N.O.). REFER TO NOTES FOR HEIGHTS AND ADDITIONAL CLADDING (TILE). X FLOOR PLAN KEY NOTES 1/8" = 1'-0" A1.03 1 LEVEL 02 FLOOR PLAN -SOUTH N I S S U E
RTIRTI CO2 D 244824482448 24482448 G-------2460 2460 2460 2460 2460 D 24x48 24x48 C-CEILING TYPES: A 1'-0" CEILING TYPE CEILING/SOFFIT HEIGHT TYPE A: 2'-0" X 4'-0" VINYL FACED GYPSUM BOARD CEILING TILE TYPE B: 2'-0" X 2'-0" ACOUSTICAL CEILING TILE. NEC RATING =.75 OR HIGHER REFER TO ITEM B ON FINISH SCHEDULE TYPE B.1: 2'-0" X 4'-0" ACOUSTICAL CEILING TILE. NEC RATING =.75 OR HIGHER TYPE D: OPEN TO STRUCTURE ABOVE, PAINTED, REFER TO NOTE 12GENERAL NOTES TYPE E: 5/8" GYPSUM BOARD CEILING, LEVEL 4 FINISH, PAINTED TYPE F: METAL PANEL, REFER TO FINISH SCHEDULE TYPE G: ACOUSTIC CEILING SYSTEM WITHIN BOWLING - THREE (3) LAYERS OF 5/8" TYPE "C" GYPSUM BOARD OVER DRYWALL FURRING CHANNELS WITH 3-1/2" FIBERGLASS INSULATION HUNG BY ISOLATION HANGERS TYPE J: CEDAR PLANK SECURED TO 3-5/8" MTL. STUD FRAMING TYPE J.1: SAME AS J, EXCEPT THE STAIN IS DIFFERENT, REFER TO FINISH SCHEDULE ALTERNATE FOR TYPE B & B.1: ROCKFON ARTIC 2'-0" X 2'-0" SQUARE TEGULAR TILE. GC TO PROVIDE PRICING ALTERNATE FOR TYPE A: ROCKFON HYGIENIC PLUS 2'-0" X 4'-0" SQUARE LAY IN TILE. GC TO PROVIDE PRICING 1. CENTER ALL FIXTURES IN CEILING TILES & FIELD VERIFY GRID LAYOUT FOR PROPER FIXTURE PLACEMENT (TO MATCH DRAWINGS) 2. CENTER ALL SPRINKLER HEADS IN TILES 3. ALL FIXTURES OVER DOOR TO BE CENTERED ON DOOR OPENING, UNLESS NOTED OTHERWISE 4. REFER TO PLUMBING DRAWINGS FOR SPRINKLER FIRE PROTECTION SYSTEM REQUIREMENTS. PROVIDE FULLY RECESSED SPRINKLER HEADS W/ FLUSH COVER PLATES IN FINISH TO MATCH CEILING IN ALL PUBLIC ACCESSIBLE AREAS 5. ALIGN ALL FIXTURES IN BOTH DIRECTIONS (LAY OUT ALL GRIDS SUCH THAT ALIGNMENT IS CONSISTENT) 6. ALL WIRING ABOVE CEILING IS TO BE IN RIGID CONDUIT - REFER ELECTRICAL DRAWINGS 7. E.C. TO VERIFY ALL LOCATIONS OF WALL MOUNTED -BOXES FOR SCONCES AND CLOCK OUTLETS W/ OWNER PRIOR TO INSTALLATION 8. G.C. TO PAINT ALL VISIBLE SIDES GYP BOARD CEILINGS AND SOFFITS 9. REFER TO ELECTRIC DWGS. FOR LIGHTING FIXTURE SCHEDULE 10. E.C. TO VERIFY ALL EXTERIOR EM LIGHTING AT EACH EXTERIOR EXIT TO BE MIN FOOT-CANDLE AT FLOOR 11. ALL HVAC DUCT DETECTORS LOCATED WITHIN THE CEILING CAVITY ARE TO BE ACCESSIBLE BY REMOVABLE CEILING TILES OR ACCESS PANELS IDENTIFIED BY THREE-DIMENSIONAL SIGNAGE AT THE CEILING LEVEL (GRID-LOC OR EQUAL) 12. GC TO PAINT UNDERSIDE OF ENTIRE EXPOSED CEILING STRUCTURE & ALL COMPONENTS THAT RUN THROUGH, THIS INCLUDES BUT IS NOT LIMITED TO DECKING, BEAMS, COLUMNS ABOVE FINISHED CEILING HEIGHT, EXPOSED DUCTS, DIFFUSERS, HEAT PUMPS, PIPING, CONDUIT, ETC. PAINT COLOR AS SELECTED BY C. RAE INTERIORS 13. DIFFUSERS IN METAL CEILINGS AND CEDAR CEILINGS TO RECEIVE A CUSTOM FINISH, COLOR AS SELECTED BY C. RAE. INTERIORS, GC TO PAINT THE DIFFUSERS IN FIELD IF A PRE-FINISHED COLOR WAS NOT SELECTED. DIFFUSERS PLACED IN WHITE CEILINGS TO HAVE A WHITE FINISH. DIFFUSERS PLACED IN WALLS TO BE PAINTED IN FIELD TO MATCH WALL PAINT COLOR 14. ALL SUSPENDED CEILING GRID SYSTEMS AND LIGHT FIXTURES TO RECEIVE EXTRA BRACING TO MEET THE 2019 CALIFORNIA BUILDING CODE REFER TO THE GENERAL NOTES ON SHEET TS 15. ALL WALL SCONCE, PENDANT, AND CHANDELIER HEIGHTS TO BE DETERMINED BY C. RAE INTERIORS, GC TO COORDINATE 16. PENETRATIONS IN FIRE RATED CEILINGS AND FLOORS TO BE UL LISTED 17. CONTROL JOINTS TO BE INCORPORATED EVERY 30 FEET IN GYPSUM BOARD CEILINGS GENERAL FIXTURE MOUNTING HEIGHTS, GC TO VERIFY WITH C. RAE INTERIORS PRIOR TO ORDER AND INSTALLATION: BOCCE COURTS: 82" TO B.O. FIXTURE, ABOVE WALKING SURFACE. = LED TAPELIGHT, REFER TO ELECTRICAL DRAWINGS REFLECTED CEILING PLAN GENERAL NOTES: CEDAR CEILING INSTALLATION: • GC TO INSTALL A RANDOM PATTERN • BOARD LENGTHS TO BE A MIX OF 4 FEET, 8 FEET, & 12 FEET • BOARD WIDTH TO BE 6 INCHES NOTE: - GENERAL CONTRACTOR TO PROVIDE SERVICE ACCESS PANELS BELOW CLEANOUTS, PULL BOXES AND JUNCTION BOXES THAT SERVE COMMON OR OTHER TENANT SPACES ABOVE. FIELD VERIFY LOCATIONS. METAL CEILING PANEL DESCRIPTION: METAL CEILING PANELS: - MATERIAL: STEEL - THICKNESS: 18 GAUGE - WIDTH: 12 18 24 PANELS - LENGTH: RANDOM, GC TO CUT EDGES IN THE FIELD - EDGE PIECE: L SHAPED, HIGH WITH A ¾ LIP METAL CEILING PACKAGE WILL BE SHIPPED WITH: - METAL CEILING PANELS & EDGE PIECES - HOLE PUNCH - SCREWS - +/-10,000 - DEGREASER - QUARTS - CLEAR COAT SEALER - GALLONS OF AN OIL-BASED POLYURETHANE PRODUCT (SEMI-GLOSS FOR INTERIOR) GC TO SUPPLY: - LACQUER THINNER - GLOVES INTERIOR INSTALLATION FOR GC: FIRST INSTALL THE EDGE PIECES AROUND THE CLOUD PERIMETER. THEN INSTALL PANELS ALONG THE UNDERSIDE OF THE CLOUD. ARRANGE IN A RANDOM PATTERN, IN ROWS OF 12 18 AND 24 CUT THE EDGE OF EACH ROW NEATLY, AT THE EDGE OF THE CLOUD. PANELS ARE TO BE SCREWED TO THE PLYWOOD SUBSTRATE. NO GLUE NECESSARY. HOLES WILL BE PRE-DRILLED IN THE PANELS AT +/-24 O.C. FOR INSTALLATION. EXTRA HOLES WILL NEED TO BE PUNCHED AT CORNERS WHERE THE PANEL WAS CUT, AND ANY OTHER MISC. POINTS WHERE THE METAL IS SAGGING. ALL PANELS ARE SHIPPED WITH AN OIL COATING. THE OIL COATING NEEDS TO REMAIN ON THE PANELS DURING INSTALLATION. THE PANELS ARE STEEL AND ONCE EXPOSED TO AIR OXIDATION CAN BEGIN. THE OIL IS AN AID BUT NOT FOOLPROOF. EXPOSURE TO AIR, ESPECIALLY HUMID OR DAMP AIR IS NOT RECOMMENDED. CLEARCOAT SHOULD BE APPLIED AS SOON AS POSSIBLE AFTER INSTALLATION. WITHIN TWENTY-FOUR (24) HOURS, AFTER PANELS ARE INSTALLED,(THE SOONER THE BETTER) THEY SHALL BE WIPED CLEAN WITH A DEGREASER, FOLLOWED BY A LACQUER THINNER. IMMEDIATELY AFTER, METAL PANELS SHALL BE FINISHED WITH A CLEAR COAT SEALER. INSTALLER SHALL WEAR CLEAN RUBBER OR NITRILE GLOVES DURING INSTALLATION TO PREVENT FINGER PRINTS. THE SWEAT IN YOUR HANDS CAN CAUSE RUST TO FORM RAPIDLY. 9 10 A B C D 4 5 6 7 F 10' - 0" F 10' - 0" D KITCHEN 110 CHEF'S OFFICE 111 BAR 1 102 UTILITY CLOSET 103 ENTRY STAIR STR-1 D 8' 0" 1' 0" 6' - 0" 1' 0" 8' 0" 14'6" 5' 1 1/2" 15' - 8 1/2" 24'5" EXISTING RATED GYP. CLG. 12'-0 3/4" A.A.D. D E 8' - 6" EXISTING SHAFT ABOVE EXISTING BY LANDLORD STEEL CHANNEL EDGED CANOPY W/ WOOD SOFFIT AT 10'-2" A.F.F. COLOR: GRAY COLOR: GRAY E 8' - 0" E 7' - 0" B.1 8' - 4 1/4" B.1 8' - 4 1/4" 14' 8" A 9' - 0" A 7' - 6 7/8" BISTRO 104 BOCCE LOUNGE 105 BAR LOUNGE 101 MEN'S RESTROOM 113 WOMEN'S RESTROOM 114 PRIVATE DINING 106 9.1 70" TV 70" TV 70" TV 70" TVs 70" TV 70" TV 12 11.8 8 A2.03 2 1 1 1 1 1 1 GYPSUM BOARD, PAINTED OVER METAL STUD FASTENED TIGHT TO UNDERSIDE OF MONUMENTAL STAIR, SLOPED 1 15' 0" 3' 7" 2'0" 2' 6" 6' 0" 6'6" 6' 0" 6'0" 5' 5" 15' 1" 9' 4"25' 6" 5' 6" 8' 6" 8' 6" 8' 6" 8' 6" 15' - 0" 5' 10" 2' 7" 12'0" 4'5" 7' - 6" 7' - 6" 7' 6" 5' 10" 12'9" 12' 0" 2'7" 13' 0" 2' 11" 2' 0" 2' - 0" 2'0" EQ EQ EQ EQ 2'0" 2' 0" 2'0" 2'0" 1' 0" 6' 0" 1' 0" 1' 0" 1' 6" 1'5" 1' - 6" 1'6" 1' 6" EQ 6' 0" EQ 11" 6' 7" 1' 6" 1' 9" 3' 2" EQ 12' 0"13' 0" 9' 5" 9' 0" 2' 9" 5' 0" 15' 0" 15' 0"15' 0" 4' 0" 4' 0" 8' 0" 8' - 0" 4' 0" 4' 0" 3' 9" 6' 0" 8' 0" 8' - 0" 5'0" 5'0" 3'3 1/4" EQEQ EQ 2' 0" 2' 0"4' 0"4' 0"2' 0" 1' 3" OPEN TO ABOVE OPEN TO ABOVE 1'8" 4'4" 2'0" 1'9" 4'1" 1' - 6" 5' 5" 10' 7" 8 10 4 A2.03 3 3' 0" 8' 0" 3' 0" 1' 4 3/4" 9' 0" 10'0" 9' 6" 8' 0" 6'6" 1' 6" 7' - 0" 7' 0" 7' 0" 1' 6" 1' 6" 3' 0"3' 0" 1' 6" 10' 3/4" 1' 0" 7' - 0" 7' 0" 1' 0" 2' 0" 4'2" 17' 11" 6' 10" EQEQ 6' 0" 7' 8" 2' 11" 9' 5" 5' 6" 1' 2" 3' 11" 1' 2" 3' 11" 3'2" 4' 6" 4' 6" 2' 10" WINE CLOSET 107 E 9' - 1" EQEQ 70" TV 1'6" 19' 11 3/4"18' 0"6' 0" EXISTING RATED GYP. CLG. ABOVE AT 12'-6" A.A.D. SHOWN DASHED 10'0" 4' 3" 10' 0" EQEQ EQEQ 7' - 6"6' 5"6' 4" 3'3" 13' 11"2' - 1"14' 0"1' 11" 9' 7" EQEQ 2' 4 5/8" 7' 3" 7' 7" 5' 0" 2'0" 4' 11" 1' 1" 2'2" 4' 2" E 11' - 9" F 13' - 10" J 10' - 2" 3' 0" D 14'1 1/2" DROP ACT CEILING UNDER THE MONUMENTAL STAIR OPENING TO 8'-0" AFF, WITHIN THE HATCHED AREA, GYPSUM BOARD OVER METAL STUDS TO OCCUR AT 9'-0", REFER TO SHEET A8.07 8 8 8 EQEQ EQ EQ 2' 2" 9'0" EQEQ EQEQ 1'3" EQ EQ EQ EQ EQ EQ 10 3/4" 5' 1 1/2" 15' - 8 1/2" EQEQ CEILING RETURNS TO DECK ABOVE 5 4 1' 7" 11 1/2" 11 3 PROVIDE 3-1/2" SAFB INSULATION ABOVE RESTROOM CEILING PROVIDE 3-1/2" SAFB INSULATION ABOVE RESTROOM CEILING TYP. PASSAGEWAY C 105a 10 COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SHALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTION WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH TH ESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSIONS ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON THE JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 As indicated PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 LEVEL 01 REFLECTED CEILING PLAN 21096 Checker A2.01 REFLECTED CEILING PLAN KEYNOTES 1TELEVISION: TELEVISION AND MOUNTING BRACKETS PROVIDED AND INSTALLED BY OTHERS. COOORDINATE LOCATION W/ OWNER, LANDLORD AND ARCHITECT PRIOR TO INSTALLATION 2SCORING MONITORS: MONITORS AND MOUNTING BRACKETS PROVIDED AND INSTALLED BY OTHERS 3PIPING TO BE INSTALLED ABOVE EXISTING PASSAGEWAY C105A FIRE-RATED CEILING. FIELD VERIFY EXACT PIPE ROUTING IN FIELD PRIOR TO ANY WORK. M.C. SHALL COORDINATE LOCATIONS FOR FIRE-RATED ACCESS PANELS IN CEILING WITH G.C., K.E.C., P.C AND LANDLORD REPRESENTATIVE IN FIELD PRIOR TO ANY WORK. ACCESS PANEL QUANTITY SPACING SHALL PROVIDE ADEQUATE ACCESS ABOVE CEILING TO INSTALL ALL NEW CONDENSATE DRAIN PIPING, RS/RL PIPING (BY K.E.C.) AND SANITARY PIPING (BY P.C.). ALL ACCESS PANELS SHALL BE FURNISHED INSTALLED BY G.C. SEE MECH. DWGS. 4CENTER FIXTURE IN ROOM/OR UNDERSIDE OF CANOPY 5DRAPES, AS SELECTED BY C. RAE. INTERIORS, TYP. IN PRIVATE DINING AND BANQUET ROOMS, GC TO COORDINATE WITH C. RAE INTERIORS 8KITCHEN HOOD, PROVIDED AND INSTALLED BY KITCHEN TEAM 10GC TO INSTALL CONTINUOUS LED LIGHT IN GUARDRAIL SYSTEM ON BOTH SIDES OF MONUMNTAL STAIR, REFER TO ELECTRICAL DWGS 1124" X 24" ACCESS PANEL, REFER TO MECH. DWGS. COORDINATE LOCATION W/ GC, ARCH AND OWNER PRIOR TO INSTALLATION N X 1/8" = 1'-0" A2.01 1 LEVEL 01 REFLECTED CEILING PLAN NOTE: GENERAL CONTRACTOR TO PROVIDE EXTRA CEILING GRID SUPPORTS THROUGHOUT KITCHEN CEILING WHERE 2X4 FIXTURES ARE ROTATED 90 DEGREES I S S U E
DISPLAY 24 LIQUOR DISPLAY 24 LIQUOR A8.03 D A8.03 E EDGE DETAIL: ROCK FACED OR CHISELED PAINT UNDERSIDE OF COUNTER BLACK, CUSTOMER SIDE ONLY 2X2 STL. ANGLE WELDED TO TUBES, REFER TO STRUCTRUAL DRAWINGS PROVIDE DUROCK CEMENT BOARD, AND RUN WATERPROOFING MIN. 12" UP WALL AT ALL WET AREAS 3'6 7/8" 2' 4" 2 1/2" 3'3 1/2" 7/8" 6" 3'3 1/8" T.O. STUDS 1 1/2" 1' 0" SINGLE TOP PLATE, FIRE TREATED, START AND STOP AROUND TUBES REFER TO STRUCTURAL FOR ATTACHMENT BAR DIEWALL CONSTRUCTION BY JJS: WOOD VENEER OVER 1/2" PLYWOOD SHEATHING, INSTALL BASE AS SCHEDULED, INSTALL -BRACKETS FOR MAIN COUNTER BAR TOP BY GRANITE VENDOR: 1-1/4" SOLID STONE TOP, ON 1" EXTERIOR GRADE MOISTURE RESISTANT PLYWOOD ST-3 10 5/8" T.O. FINISHED FLOORING T.O. CONCRETE SLAB 3' 4 5/8" T.O. TUBE 3'5 1/8" T.O. PLATE 4" 5/8" 1' 8" 3 3/8" 8" 1' 0" FRP ON 5/8" MOISTURE AND MOLD RESISTANT GYP. BD. ON 6" 20 GA. METAL STUDS @ 16" 0.C., CONTINUE UNDER COUNTER EDGE OF STEEL TUBE BEYOND, REF. TO STRUCT. DWGS. 11 3/8" 1 1/2" 1/2" 6" 5/8" 1/2" 3" 7 1/8" 2" A8.03 E BAR TOPS BY GRANITE VENDOR: 1-1/4" SOLID STONE TOP, ON 1" EXTERIOR GRADE MOISTURE RESISTANT PLYWOOD EDGE DETAIL: ROCK FACED OR CHISELED PAINT UNDERSIDE OF COUNTER BLACK, ON CUSTOMER SIDE ONLY BAR DIEWALL CONSTRUCTION BY JJS: WOOD VENEER OVER 1/2" PLYWOOD SHEATHING, INSTALL BASE AS SCHEDULED 1' 10" 1' 4 5/8" 2 1/2" 6" 2 1/2" 2' 7" HSS 2X2 W/ 2X2 ANGLE, WELDED TO HSS POST, REF. STRUCT DWGS. SINGLE TOP PLATE, FIRE TREATED, START AND STOP AROUND TUBES ST-3 1' 0" 8" 6" MAX. 2 3/4" 7/8" 1' 1" 3/8" 3" 10" STEEL 2X2 ANGLE WELDED TO TUBES, REFER TO STRUCTURAL DRAWINGS FRP ON 5/8" MOISTURE AND MOLD RESISTANT GYP. BD. ON 6" 20 GA. METAL STUDS @ 16" 0.C., CONTINUE UNDER COUNTER PROVIDE DUROCK CEMENT BOARD, AND RUN WATERPROOFING MIN. 12" UP WALL AT ALL WET AREAS EDGE OF STEEL TUBE BEYOND, REF. TO STRUCT. DWGS. 6" 3'3 1/8" T.O. STUDS 1 1/2" 1' 0" REFER TO STRUCTURAL FOR ATTACHMENT T.O. FINISHED FLOORING T.O. CONCRETE SLAB 3'6 7/8" 2' 9 1/2" 7/8" 9" MIN. 2'8 1/8" 2'3" MIN. 5/8" 3'5 1/8" T.O. PLATE 3'4 5/8" T.O. TUBE 11 3/8" 1 1/2" EDGE DETAIL: ROCK FACED OR CHISELED 1 1/4" 1/2" 6" 5/8" 1/2" 3" 1/8" 2 1/2" 1 1/4" 1 1/4" 1/8" 1-1/4" SOLID STONE TOP, BY GRANITE VENDOR EDGE DETAIL: CHISELED HONED EDGE 3/4" EXTERIOR GRADE MOISUTE RESISTANT PLYWOOD STEEL PLATE OR STL. ANGLE, REFER TO SECTIONS THIS SHEET 4" STEEL PLATE OR STL. ANGLE, REFER TO SECTIONS THIS SHEET 1 1/4" 1" FINISH UNDERSIDE OF COUNTER W/ FRP 2" 1-1/4" SOLID STONE TOP, BY GRANITE VENDOR EDGE DETAIL: FLAT HONED EDGE 3/4" EXTERIOR GRADE MOISTURE RESISTANT PLYWOOD, FINISH W/ FOOD GRADE/SAFE BLACK LAMINATE 2 1/4" BAR TOP BY GRANITE VENDOR: 1-1/4" SOLID STONE TOP, ON 1" EXTERIOR GRADE MOISTURE RESISTANT PLYWOOD 10 1/8" 2' 0" 1' 0" ST-1 3' 3 1/2" VERIFY WITH KITCHEN EQUIPMENT VENDOR 7/8" 2' 6" 2" 6" 7 7/8" 3'1 1/8" 1 1/8" 1 1/4" 4' 2 1/4" 1 1/4" 1" 4'0" 15"x5"x3/8" STEEL PLATE, BY MILLWORKER, APPROX. 36" O.C. AND AT ALL STONE JOINTS. ATTACH TO WD. BLOCKING IN WALL STONE TOP BY GRANITE VENDOR: TOP-DIRECT ATTACHMENT TO KITCHEN EQUIPMENT -COORDINATE W/ KITCHEN VENDOR EDGE DETAIL: FLAT, HONED FRT BLOCKING, IF REQUIRED. VERIFY W/ KITCHEN SUPPLIER COUNTER WALL CONSTRUCTION: -FRP -5/8" GYPSUM BOARD -6" METAL FRAMING @ 16" O.C. -5/8" PLYWOOD BACKING -FRP PROVIDE DUROCK CEMENT BOARD, AND RUN WATERPROOFING MIN. 12" UP WALL AT ALL WET AREAS FRP TO CONTINUE UNDER COUNTERS & WRAP VERTICAL EDGE BOTH SIDES A8.03 E 5/8" 6" 5/8" 7 1/4" KITCHEN EQUIPMENT, SEE FOOD SERVICE DRAWINGS INTERIOR WALL FINISH TO BE FRP, TYP. HSS POST, REFER TO STRUCTURAL DWGS. FRP TO WRAP IN OPENING OUTSIDE WALL FINISH BY MILLWORKER BAR DIE WALL: ONE (1) LAYER OF 5/8" CEMENT BOARD W/ WATERPROOFING AND FRP ON 6" METAL STUD FRAMING W/ WOOD TOP CAP SET EVEN W/ PLATES OF STRUCTURAL POSTS. REFER TO WALL SECTIONS FOR ADDITIONAL NOTES CEDAR HARDWOOD END CAPS A8.03 7 LINE OF COUNTER, ABOVE A8.03 8 2'1 3/8" 1'1 1/2"11 7/8" 7 1/8"2' 11 1/2"1' 3/4"2' 5/8"1' 5 1/2" 1' 0" 6 3/8"1' 3 3/8" 1'0 1/2" 7 1/8" 10" 5 1/2"1' 1 1/2" 10" 3' 7 1/2" 3'6 3/4" 3'7 1/2" 3' 7 1/2" 3'7 1/2" 1'4 1/2" 1'0 1/2" 3'8 1/8" 2'0" 14'9 1/4" 21'5 7/8" 4 1/2" 2' 0" 2" 2" 3' 1" 7' 5" 1'2" 24" SCUPPER PAN 24" SCUPPER PAN NOTE COLUMN NOTE: GC TO COORDINATE ALL WALL OPENINGS W/ KITCHEN EQUIPMENT, TYP. BOOTH BY MILLWORKER 5 1/4" 2'0" 1'10 3/4" 7 1/8" 11'8 7/8" 4'4" 16' 0 7/8" A8.03 3 A8.03 7 8 3/4" A8.03 8 A8.03 3 2 1/8" 2'1 3/8" 2 1/8" 2'5 5/8" 10 1/2" 2' 9 3/4" 2' 0 1/2" 1' 11 3/4" 2' 7" 10' 3 1/2" 1" 1" 1'0 1/2" 3'8 1/8" 2'0" 14'8 5/8" 4 1/2" 6" 1' 6" 2' 4" FOOT REST 3 1/8" SEATING 1' 8 7/8" COUNTER 9 3/4" 2'10" 11' 9 5/8" 4'4" 1' 3 1/8" 1' 10" 10 3/4" 6 3/4" 10 1/2" 24" SCUPPER PAN, NO GRANITE THIS AREA, MOUNT ON SUBSTRATE, GC TO COORDINATE W/ GRANITE UPPLIER AND KITCHEN EQUIPMENT IN FIELD NOTE COLUMN GRANITE COUNTERTOP @ 42" A.F.F. LINE OF METAL STUDS, BELOW GRANITE COUNTERTOP @ 42" A.F.F. LOWER GRANITE COUNTERTOP @ 34" A.F.F., 20" DEEP GRANITE COUNTERTOP @ 48" A.F.F. 3 1/2" 1'5" 3 1/2" LEVEL 01 DECK (797'-1") 0' - 1" LEVEL 01 FIN FLOOR 0' - 7/8" T.O FOOT REST T.O SEATING T.O BACK REST GRANITE COUNTER TOP @ 42" A.F.F P.LAM FACE PANELS BY MILLWORKER 1 1/4" HARDWOOD WALNUT BASE BY MILLWORKER 1/4" HARDWOOD WALNUT BASE BY MILLWORKER P.LAM FACE PANELS BY MILLWORKER GRANITE COUNTER TOP @ 48" A.F.F GRANITE COUNTER TOP @ 34" A.F.F GRANITE COUNTER TOP @ 42" A.F.F 9" 2'6 1/2" 2 1/2" 3' 6" 1' 0" 1'5 7/8" 11 7/8" 6 1/4" 4' 0" 3' 6" 2'10" LEVEL 01 DECK (797'-1") 0' - 1" LEVEL 01 FIN FLOOR 0' - 1 7/8" P.LAM FACE PANELS BY MILLWORKER 1 1/4" HARDWOOD WALNUT BASE BY MILLWORKER OPEN TO BAR GRANITE COUNTER TOP BY OTHERS OPEN TO BAR SEATING CEDAR CAP, REFER TO MILLWORK DWGS 9" 2'6 1/2" 2 1/2" 3' 6" 1'0" 6 1/4" 4" 7 7/8" 1' 3/8" 11 3/8" 1' 1 3/8" SCUPPER PAN 2" SIDES, BEYOND LEVEL 01 DECK (797'-1") 0' - 1" LEVEL 01 FIN FLOOR 0' - 1 7/8" 9" 2' 6 1/2" 2 1/2" 3'6" 1 1/4" HARDWOOD WALNUT BASE BY MILLWORKER P.LAM FACE PANELS BY MILLWORKER 2 1/2" GRANITE TOP EXISTING COLUMN 4" ELECTRICAL OUTLET, TYP. REFER TO ELEC. DWGS. COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SH ALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTI ON WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH THESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSION S ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON TH E JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 As indicated PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 BAR PLANS 21096 RDLA A8.03 N 1" = 1'-0" A8.03 A BAR SECTION -TYP. 1" = 1'-0" A8.03 B BAR SECTION -ADA 3" = 1'-0" A8.03 D BAR FRONT EDGE DETAIL 3" = 1'-0" A8.03 E BAR EDGE DETAIL 1" = 1'-0" A8.03 C EXPO COUNTER SECTION 1/2" = 1'-0" A8.03 1 BAR 1 ENLARGED DIE WALL PLAN 1/2" = 1'-0" A8.03 2 BAR 1 ENLARGED COUNTER PLAN 1/2" = 1'-0" A8.03 7 BAR #1 ELEVATION "A" 1/2" = 1'-0" A8.03 8 BAR #1 ELEVATION "B" 1/2" = 1'-0" A8.03 3 BAR #1 ELEVATION "C" I S S U E
TS18IC D DISPLAYLIQUOR D D BACKSDBS60 BAR 60" PERLICK DOOR D C H LIQUORDISPLAY D TSD63C D D D DD H C TRASH BACKSDBS60 BAR2 60" PERLICK 3' 0"9 3/4" 3' 3/4" 6" 14' 1 1/8" 1'9 5/8" 16'4 3/4" 6"2' 6"1' 6"4 1/4" 4' 10 1/4" 6" WALL FINISH BY MILLWORKER LINE OF COUNTER, ABOVE INTERIOR WALL FINISH TO BE FRP, TYP. HSS POST, REFER TO STRUCTURAL DWGS. ANGLE IRON 4" X 4" X 1/4"T. NOTCH METAL STUDS TO ALLOW FOR DECORATIVE ANGLE BRACKET ANGLE IRON 4" X 4" X 1/4"T. METAL STUDS TO ALLOW FOR DECORATIVE ANGLE BRACKET BAR DIE WALL: ONE (1) LAYER OF 5/8" CEMENT BOARD W/ WATERPROOFING AND FRP ON 6" METAL STUD FRAMING W/ WOOD TOP CAP SET EVEN W/ PLATES OF STRUCTURAL POSTS. REFER TO WALL SECTIONS FOR ADDITIONAL NOTES CEDAR HARDWOOD END CAPS KITCHEN EQUIPMENT, SEE FOOD SERVICE DRAWINGS 1 3/8" 3/8" 2' 7 1/2"6"8 1/4"1' 0 1/2" 6 3/4" 2' 9 1/8" 4 5/8" A8.04 7 GRANITE COUNTERTOP @ 42" A.F.F. LINE OF WALL BELOW 6 3/4"2' 10 1/2"4 1/2" 3' 9 3/4" 4 5/8" 6" 12' 4 3/8" 2'9 1/8" 4 5/8" 16'4 3/4" 2' 7 1/2"6"8 1/4"1' 0 1/2" 1/2"6"3' 3"6"2 3/4" 4' - 10 1/4" 6 3/4" 2'9 1/8" 4 5/8" 3' 8 1/2" ANGLE IRON 4" X 4" X 1/4"T. METAL STUDS TO ALLOW FOR DECORATIVE ANGLE BRACKET LEVEL 02 DECK (814'-2") 17' - 2" LEVEL 02 FIN FLOOR 17' - 2 7/8" 5 1/2"2' 10" 1 1/4"1 1/4" 3' 6" 2" 1" GRANITE COUNTER TOP BY OTHERS METAL BASE, BY MILLWORKER ANGLE IRON 4"X4" X 1/4" THICK WOOD FINISH BY MILLWORKER 5-1/2" WOOD PLANK BAR FACE LEVEL 2 DECK 814' -2" LEVEL 2 4' 0" 2' - 9 3/8" 7 3/8" 6" 7' 4 3/4" 2" 1' 4" 2' 0" 2'0" 3' 7 3/4" 3' 7 3/4" 7 3/8" 4 1/2" 11 7/8" 3' 1/8" 3" 2' 1" 6 1/2" FLIP TOP 2' 10" 1' 10 1/4" WALL FINISH BY MILLWORKER ANGLE IRON 4" X 4" X 1/4"T. NOTCH METAL STUDS TO ALLOW FOR DECORATIVE ANGLE BRACKET BAR DIE WALL: ONE (1) LAYER OF 5/8" CEMENT BOARD W/ WATERPROOFING AND FRP ON 6" METAL STUD FRAMING W/ WOOD TOP CAP SET EVEN W/ PLATES OF STRUCTURAL POSTS. REFER TO WALL SECTIONS FOR ADDITIONAL NOTES 24" SCUPPER PAN FRP TO WRAP IN OPENING 1 3/4" 3/4" 1 1/4" 7/8" S.S. FLIP TOP W/ HINGE. PROVIDE BLOCKING IN WALL FOR FLIP TOP ANCHORS WRAP FRP ON BAR SIDE OF WALL, REFER TO MILLWORK DWGS. FOR ADDITIONAL NOTES CEDAR HARDWOOD END CAPS 6" 13'0 1/4" 6" KITCHEN EQUIPMENT, SEE FOOD SERVICE DRAWINGS NOTCH GRANITE TOP TO ALLOW FOR S.S. FLIP TOP TO SIT FLUSH W/ GRANITE ANGLE IRON 4" X 4" X 1/4"T. NOTCH METAL STUDS TO ALLOW FOR DECORATIVE ANGLE BRACKET GC TO FIELD VERIFY THIS IS THE INTERIOR EDGE OF THE EXTERIOR WALL, IF A DISCREPANCY IS FOUND IN THE FIELD, THE ARCHITECT IS TO BE NOTIFIED RIGHT AWAY, BAR, POSTS, STUBS AND EQUIPMENT WILL NEED TO SHIFT RESPECTIVELY LINE OF COUNTER, ABOVE A8.04 6 A8.04 5 A8.04 10 3' - 0 3/4" 2' 4" 6' - 5 3/8" 8' 9 3/8" 10 5/8" 6" 11 3/8" 2'4" 13'5 1/2" 5' 0" 10 5/8" 6" 11 3/8" 1' 4 5/8" 2' 4" 3' 6 1/8" 1" 2' 10" 8' 9 1/8" 10 5/8" 6" 11 3/8" 24" SCUPPER PAN, NO GRANITE THIS AREA, MOUNT ON SUBSTRATE, GC TO COORDINATE W/ GRANITE UPPLIER AND KITCHEN EQUIPMENT IN FIELD 34" WIDE HINGED COUNTERTOP LINE OF METAL STUDS, BELOW GRANITE COUNTERTOP @ 42" A.F.F. LOWER GRANITE COUNTERTOP @ 33.5" A.F.F., 20" DEEP LEVEL 02 FIN FLOOR 17' - 2 7/8" GRANITE COUNTER TOP BY OTHERS 5-1/2" WOOD PLANK BAR FACE METAL BASE, BY MILLWORKER ANGLE IRON 4"X4" X 1/4" THICK 5 5/8" 2' 2 7/8" 6 1/2" 3" 3'6" LEVEL 2 DECK 814' -2" 7 LEVEL 2 7 LEVEL 02 FIN FLOOR 17' - 2 7/8" GRANITE COUNTER TOP BY OTHERS METAL BASE, BY MILLWORKER ANGLE IRON 4"X4" X 1/4" THICK GRANITE ADA COUNTER TOP, BY OTHERS WOOD FINISH BY MILLWORKER ANGLE IRON 4"X4" X 1/4" THICK -1/2" WOOD PLANK BAR FACE 5 5/8" 2' 3 1/8" 6 1/4" 3" 3'6" 9 7/8" 2" LEVEL 2 DECK 814' -2" s05 LEVEL 2 LEVEL 02 FIN FLOOR 17' - 2 7/8" 5-1/2" WOOD PLANK BAR FACE, TYP. METAL BASE BY MILLWORKER LOW ADA COUNTER S.S. FLIP DOOR OPEN TO BAR SCUPPER PAN 2" SIDES, BEYOND GRANITE COUNTER TOP BY OTHERS CEDAR CAP, REFER TO MILLWORK DWGS. OPEN TO BAR LEVEL 2 DECK 814' -2" sD 7 LEVEL 2 7 COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SH ALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTI ON WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH THESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSION S ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON TH E JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 1/2" = 1'-0" PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 BAR PLANS 21096 Checker A8.04 N 1/2" = 1'-0" A8.04 1 BAR 3 ENLARGED DIE WALL PLAN 1/2" = 1'-0" A8.04 2 BAR 3 ENLARGED COUNTER PLAN 1/2" = 1'-0" A8.04 7 BAR #3 EAST ELEVATION 1/2" = 1'-0" A8.04 3 BAR 2 DIE WALL ENLARGED PLAN 1/2" = 1'-0" A8.04 4 BAR 2 ENLARGED COUNTER PLAN 1/2" = 1'-0" A8.04 5 BAR #2 EAST ELEVATION 1/2" = 1'-0" A8.04 6 BAR #2 NORTH ELEVATION 1/2" = 1'-0" A8.04 10 BAR #2 WEST ELEVATION I S S U E
G WS-MS-6-RFG WS-MS-6-RFG-IR WS-MS-6-RFG-IR-W WS-MS-6-RFG-W A8.05 4 A8.05 3 A8.05 5 11 1/2" 4'0" 4'0" 4' 0" 5 3/8" 6" 12'10 7/8" 6 3/4" 3' 0" 3' 7 1/4" 3' 7 1/4" 1' 1" 11' 1/4" 6" 2' 8 3/8" 10 1/8" 6' 6 5/8" 5' 7 7/8" LINE OF COUNTER ABOVE KITCHEN EQUIPMENT NOTE: PIZZA OVEN HAS FACADE READY BACKERBOARD FACTORY INSTALLED AT ALL SIDES OF UPPER OVEN. WALL TYPE SHOWN INDICATES WALL AT LOWER OVEN THAT IS INTENDED TO BE A CONTINUATION OF THE FACTORY INSTALLED BACKERBOARD. STUD WALL WILL ALSO BE ABOVE THE UPPER PORTION OF OVEN UNTIL 6" ABOVE CEILING. OUTSIDE FACE OF CEMENT BOARD IS TO ALIGN WITH OUTSIDE FACE OF FACTORY INSTALLED BACKERBOARD OF PIZZA OVEN. V.I.F. ALL DIMENSIONS. G.C. TO PROVIDE TILE AROUND ENTIRE PIZZA OVEN 3/4" FRT BLOCKING TO CAP METAL BAR WALL TO ALLOW FOR THE ATTACHMENT OF WOOD END CAP AND FRP FINISH, TYP. IN SIM. LOCATIONS INTERIOR WALL FINISH TO BE FRP, TYP. HSS POST, REFER TO STRUCTURAL DWGS., TYP. ALL POSTS MUST BE SET PLUMB AND LEVEL FROM A.F.F. B A8.05 A A8.05 A8.05 4 A8.05 3 A8.05 5 1 5/8" 6" 1 5/8" 6'10 1/2" 5' 11 5/8" 1' 8" 9 1/4" 2 7/8" 9 1/4" 9 3/8" 1' 9 1/2" 1 3/8" 6" 1'0 5/8" 2" 2" 11' 8" 1 -63/4 SNEEZE GUARD LINE OF METAL STUDS, BELOW UPPER GRANITE COUNTERTOP @ 42" A.F.F. 4 1/2" 4 1/2" 1' 8" A A8.05 LEVEL 01 DECK (797'-1") 0' - 1" LEVEL 01 FIN FLOOR 0' - 7/8" WOOD WALL PANELING ON WALLS, WRAP ALL EDGES GRANITE COUNTER TOP BY OTHERS SNEEZE GUARD CERAMIC TILE 3'6" 4 1/2" 10' 11 1/2" sC 8 LEVEL 01 FIN FLOOR 0' - 1 7/8" GRANITE COUNTER TOP BY OTHERS SNEEZE GUARD CERAMIC TILE WOOD WALL PANELING ON WALLS, WRAP ALL EDGES BOCCE COURT BASE BOARD 1' 0" 3'5 1/8" C C LEVEL 01 FIN FLOOR 0' - 1 7/8" PIZZA OVEN - SHOWN DASHED BEHIND WALL CERAMIC TILE PIZZA OVEN SHELF EXHAUST HOOD PIZZA PREPARATION TABLE AND REFRIGERATION UNIT BY KITCHEN VENDOR, GC TO COORDINATE INSTALLATION AND ELECTRICAL ROUGH-INS WITH VENDOR 2" DIAMETER STAINLESS STEEL POST WITH FLANGE BAR TOP BY GRANITE VENDOR: 1-1/4" SOLID STONE TOP ON 1" EXTERIOR GRADE MOISTURE RESISTANT PLYWOOD STONE TOP BY GRANITE VENDOR: DIRECT ATTACHMENT TO KITCHEN EQUIPMENT - COORDINATE W/ EQUIPMENT VENDOR NOTE: GRANITE TOPS BY GRANITE SUBCONTRACTOR. SUBTOP SUPPORT BY MILLWORK SUBCONTRACTOR 1' 0 5/8" 1 3/8" 1' 8" 3' 5" VERIFY W/ EQUIP. VENDOR 3'0" A.F.F. 4' 6" A.F.F. MIN. STL. PLATE WELDED TO TUBES, REFER TO STRUCTRUAL DRAWINGS BOTH SIDES SINGLE TOP PLATE, FIRE TREATED, START AND STOP AROUND TUBES 3/8" GLASS PANEL 'SNEEZE GUARD' ST-3 ST-4 2 1/4" 1' 5" 3/4" 1/2" 1 1/4" 1" 6" 5/8" REFER TO STRUCTURAL FOR ATTACHMENT T.O. FINISHED FLOORING T.O. CONCRETE SLAB 1/2" 3" FRP ON 5/8" MOISTURE AND MOLD RESISTANT GYP. BD. ON 6" 20 GA. METAL STUDS @ 16" 0.C., CONTINUE UNDER COUNTER PROVIDE DUROCK CEMENT BOARD, AND RUN WATERPROOFING MIN. 12" UP WALL AT ALL WET AREAS EDGE OF STEEL TUBE BEYOND, REF. TO STRUCT. DWGS. 1' 0" 3'5 1/8" TO STUD 1 1/2" 3' 6 5/8" T.O. TUBE LED LIGHT, REFER TO FOR SIMILAR DETAIL 3' 8 7/8" 7/8" 3'5 3/4" 2 1/4" D A8.03 BAR DIEWALL CONSTRUCTION BY JJS: WOOD VENEER OVER 1/2" PLYWOOD SHEATHING, INSTALL BASE AS SCHEDULED 2" LEVEL 01 FIN FLOOR 0' - 7/8" WALL CAP BY GRANITE VENDOR: 1-1/4" SOLID STONE TOP ON 1" EXTERIOR GRADE MOISTURE RESISTANT PLYWOOD SINGLE TOP PLATE, FIRE TREATED, START AND STOP AROUND TUBES LED LIGHT, REFER TO FOR SIMILAR DETAIL REFER TO STRUCTURAL FOR ATTACHMENT BAR DIEWALL CONSTRUCTION BY JJS: WOOD VENEER OVER 1/2" PLYWOOD SHEATHING, INSTALL BASE AS SCHEDULED 0' 0" LEVEL 01 T.O. FINISHED FLOORING NOTE: GRANITE TOPS BY GRANITE SUBCONTRACTOR. SUBTOP SUPPORT BY MILLWORK SUBCONTRACTOR T.O. CONCRETE SLAB FRP ON 5/8" MOISTURE AND MOLD RESISTANT GYP. BD. ON 6" 20 GA. METAL STUDS @ 16" 0.C., CONTINUE UNDER COUNTER PROVIDE DUROCK CEMENT BOARD, AND RUN WATERPROOFING MIN. 12" UP WALL AT ALL WET AREAS EDGE OF STEEL TUBE BEYOND, REF. TO STRUCT. DWGS. 7/8"8 3/8" 1/4" 1 5/8"6"1 5/8" 1 1/2" 3'5 1/8" TO STUD 3'6 5/8" TO TUBE 3' 5 1/8" LEVEL 1 DECK 797' -0" sC 8 LEVEL 1 COPYRIGHT 2021 ALL RIGHTS RESERVED CHECKED BY PROJECT PLOT DATE FILE NAME DRAWN BY 16102 Chagrin Boulevard, Suite 200 Shaker Heights, Ohio 44120 Phone: (216) 752-4300 Fax: (216) 752 4301 www.RDLarchitects.com THE DRAWINGS, SPECIFICATIONS, IDEAS, DESIGNS AND ARRANGEMENTS REPRESENTED THEREBY ARE AND SHALL REMAIN THE PROPERTY OF THE ARCHITECT. NO PART OF SH ALL BE COPIED, DISCLOSED TO OTHERS OR USED IN CONJUNCTI ON WITH ANY WORK OR PROJECT OTHER THAN THE SPECIFIC PROJECT FOR WHICH THEY HAVE BEEN PREPARED AND DEVELOPED WITHOUT THE WRITTEN CONSENT OF THE ARCHITECT. VISUAL CONTACT WITH THESE DRAWINGS OR SPECIFICATIONS SHALL CONSTITUTE CONCLUSIVE EVIDENCE OF ACCEPTANCE OF THESE RESTRICTIONS. WRITTEN DIMENSION S ON THESE DRAWINGS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. CONTRACTORS SHALL VERIFY AND BE RESPONSIBLE FOR ALL DIMENSIONS AND CONDITIONS ON TH E JOB SITE, AND THIS OFFICE MUST BE NOTIFIED OF ANY VARIATIONS FROM THE DIMENSIONS AND CONDITIONS SHOWN BY THESE DRAWINGS. 11/2/2021 LTE KFC PERMIT SUBMITTAL 10/29/21 As indicated PINSTRIPES @ TOPANGA CENTER EXPANSION 21851 VICTORY BLVD CANOGA PARK, CA 91303 PIZZA OVEN BAR PLANS AND DETAILS 21096 RDLA A8.05 N GENERAL NOTES: 1. ALL GAPS IN EXCESS OF 1/32" ARE TO BE SEALED, THAT INCLUDES THE UNDERSIDE OF COUNTER TOPS AND INTERIOR OF CABINETS. 2. GC TO VERIFY BAR DIMENSIONS AND EQUIPMENT LOCATIONS WITH KITCHEN EQUIPMENT SUPPLIER PRIOR TO INSTALLATION. 3. DIMENSIONS TAKEN FROM GYPSUM BOARD OR CEMENT BOARD WALL FINISH 1/2" = 1'-0" A8.05 1 ENLARGED PLAN -PIZZA OVEN DIE WALL 1/2" = 1'-0" A8.05 2 ENLARGED PLAN -PIZZA OVEN COUNTER 1/2" = 1'-0" A8.05 3 PIZZA ELEVATION 'A' 1/2" = 1'-0" A8.05 4 PIZZA ELEVATION 'B' 1/2" = 1'-0" A8.05 5 PIZZA ELEVATION 'C' 1" = 1'-0" A8.05 B PIZZA OVEN COUNTER SECTION 1" = 1'-0" A8.05 A PIZZA OVEN COUNTER SECTION 'A' I S S U E