RO Water Purifier Installation: A Step-By-Step Guide
Having a Reverse Osmosis (RO) water purifier is a great way to have safe, pure water. In addition to the filter, a RO water purifier includes other parts to make sure that you have clean, fresh water. The first step in installing a RO water purifier is to connect the water supply line. This line connects to your home's cold water supply and then connects to your RO filter. The next step is to connect the drain line. A drain line is used to dispose of water that is not purified. It is routed through plumbing under a sink and then out through a drain. The drain line is usually lined with a plastic material. There are a variety of Parts of ro water purifier that are used. Some types of valves include: Inlet Saddle Valves, Shut-Off Valves, and RO Tank Valves. There are also a variety of fittings that are used. Some types of fittings include: Filter and Membrane Mounting Brackets, Quick-Connect fittings, Drain Saddle Valves, and John Guest and Jaco Fittings. A sediment filter is used to remove large debris and dirt. This filter may need to be replaced every year or two. A sediment pre-filter is used to remove large particles and dust. A carbon block filter removes chlorine and other dissolved compounds. A post carbon filter removes colour, odour, and organic particles. These filters are used in the final polish to make sure that your water has a fresh taste.