Issuu on Google+


Passion Drives Innovation Dedication. Innovation. Performance. These three words sum up our drive to help push our segment of the pool and spa industry to new heights. AquaStar has a history of innovation. Our innovative spirit has driven us to push new ideas and concepts to develop meaningful and useful products, setting a new standard in the industry. In 2013, we are pushing the envelope again by introducing a bold new line of drains and many other specialty products to make life a little easier for designers and pool builders alike. We have streamlined our entire product line to give you a great selection and a multitude of options. As always, on behalf of our incredible team, I want to thank all of our loyal customers for their support. So jump in and take a DIP (dedication, innovation, performance) with AquaStarÂŽ.

Olaf Mjelde BFN Co-Founder

Š 2012 AquaStar Pool Products, Inc.

Passion Drives Innovation


Table of Contents 3 What Makes AquaStar Different

32 Pool Cleaners

5 Fittings

35 Chlorinators

21 AquaThunder Spa Jets

37 AquaStar Terms and Conditions

25 FlowStar Skimmers

The AquaStar VGB Compliance Button AquaStar’s unique trademarked compliance button identifies submerged suction outlets from pool and spa deckside, perfect for Department of Health and building officials’ inspection and verification processes.

“Swimming Man” VGB 2008 Button

NOTE: For compliance with the ANSI/APSP 16 Standard, AquaStar has determined that all covers and screws need to be replaced every 5 years from date of installation. The facility owner should keep records. Make sure frame/sump is structurally sound and screws have at least 3 threads of engagement, or replacement of the frame/sump is also necessary.

2

table of contents


What Makes AquaStar Different

VGB-Compliant AquaStar suction outlets, gravity drains, sumps, frames and retrofit plates are the safest drains available, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (federal mandate).

CPSC-Listed All AquaStar drain covers and sumps are tested at nationally recognized testing labs (NRTL), exceeding ANSI/APSP 16-2011, NSF 50-2008 and G154 UV standards.

Advanced Materials AquaStar’s engineered polymers far exceed the UV and durability standards of other materials. AquaStar has been testing all materials to the G154 UV test standard since 2004, long before it became standard requirement.

Innovative Technology A disciplined approach to research and development, combined with advanced manufacturing methods enables AquaStar to deliver cuttingedge products to the market faster.

Proudly Made in the USA A commitment to American-made materials and processes means AquaStar oversees every aspect of product development, ensuring superior quality while creating valuable jobs for our communities.

the aquastar difference

3


drains 4

aquastar product catalog


drains

fittings

drains

5


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

3-3/8

3

107

Large Extended 2" Return Fitting with Gasket/Nut for Vinyl, Fiberglass or Steel Features

1-7/8

Fits 2" thread or 1½" slip

2

1½" thread in front face Extended wall fitting allows for variations in fiberglass depths

1

Includes gasket and locking nut for vinyl, fiberglass or steel installations

7/8

5

1 1/2" straight pipe thread 1/2 17/32

Includes removable eyeball and nut

2-5/16

Manufactured from UV-resistant ABS material

4 2-31/32

25 per case

2" straight pipe thread

1-15/32

R1/16 min.

Part # 1020Fxxx

1. Body, fiberglass wall fitting 2. Eye ball, fiberglass wall fitting 3. Ring, locking, fiberglass wall fitting 4. Nut, fiberglass wall fitting 5. Gasket, fiberglass wall fitting

1 1/2" socket 1.894 ±.006 1.912 ±.006

fittings

Gasket and Locking Nut for Vinyl, Fiberglass or Steel C

Part # xxgasket

Features

A

Fits 2" or 2½" threaded fittings

dimension A dimension B dimension C THD

Ideal for vinyl, fiberglass and steel installations

B

Manufactured from superior engineered UV-resistant engineered polymers

20nut 3-15/32"

2-5/8"

5/8"

2" NPSC

25nut 3-25/32"

3-1/4"

17/32"

2-1/2" NPSC

THD

Sizes: 20nut101 25nut101

B C

A

dimension A dimension B dimension C

20gasket 25gasket

20gasket

2-3/8"

3-7/16"

1/8"

25gasket

2-7/8"

3-3/4"

1/8"

25 per case

Part # xxnut101

Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits 1" or 1½" Pipe) Features

2

3

1

2-13/32

Slips inside 1½" pipe or outside 1" pipe Integrated water stop to reduce leaks Eyeball available in four orifice sizes (1", ¾", ½", slotted)

2-3/32

1-5/16

1

Manufactured from engineered polymer UV-resistant ABS material 250 per case Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. 301B = white ¾" orifice) 2-11/32

1. Flush mount return fitting, 1"/1.5", body 2. Flush mount return fitting, 1" eyeball 3. Flush mount return fitting, nut

Part # 3xx

Flush-Mount Return Fitting with Water Stop (Fits Outside 1½" Pipe) 2-13/32

Features

3

2

1

Fits outside 1½" pipe 1½" FPT in front face Finishes flush, no protrusion past the surface

2-3/32

Integrated water stop reduces leaks

1/2

1-29/32

Manufactured from engineered polymer UV-resistant ABS material Available in four orifice sizes (1", ¾", ½", slotted) 250 per case Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. JE3101B = white ¾" orifice)

2-11/32

Part # JE31xx 6

aquastar product catalog

1. Flush mount return fitting, 1.5", body 2. Flush mount return fitting, 1/2" eyeball 3. Flush mount return fitting, nut


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Vacuum Fitting with Water Stop (Fits Outside 1½" Pipe) 2-13/32

Features Fits outside 1½" pipe 1½" FPT in front face

2-3/32

1-29/32

Finishes flush, no protrusion past the surface Integrated water stop reduces leaks Manufactured from engineered polymer UV-resistant ABS material 250 per case

2-11/32

Part # 32xx

fittings

Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Inside 2" Pipe) Features 2-3/8

Slips inside 2" pipe

1-1/16

Integrated water stop to reduce leaks Eyeball available in four orifice sizes (1", ¾", ½", slotted)

33xx = 1" 33xxb = 3/4" 33xxc = 1/2" 33xxd = slot

2-1/16

1 2 3

Manufactured from engineered polymer UV-resistant ABS material

2" slip-insider

250 per case

2-3/32

1/16

Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. 3301B = white ¾" orifice) 1. Flush mount return body, fits inside 2" pipe 2. Eyeball, 1", 3/4", 1/2", or slotted orifice 3. Locking ring, flush mount

2-11/32

Part # 33xx

Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Over 2" Pipe) 2-11/32

Features

1-3/16

Slips outside 2" pipe Integrated water stop to reduce leaks Eyeball available in four orifice sizes (1", ¾", ½", slotted)

2-13/32

Manufactured from engineered polymer UV-resistant ABS material 250 per case

1

3/4

Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. 3501B = white ¾" orifice)

2

3

1. Flush mount return w/water barrier, 2" socket 2. 200 series eyeball, .75" orifice 3. Eyeball locking ring

Part # 35xx

Australian Return Fitting with Adjustable Eyeball 1½" Knock-In Features

2-15/32

Knocks into 1½" pipe, no glue necessary Self-leveling for out-of-square pipes Flange camouflages pipe and surface construction variations Adjustable eyeball available in three orifice sizes (1", ¾", ½")

15/16

Manufactured from engineered polymer UV-resistant polypropylene material

3/8

2

500 per case Add’l orifice size suffix: ¾"-B, ½"-C (ie. 401B = white ¾" orifice)

1

1-3/8

1. 1.5" Australian return knock-in fitting 2. 1.5" Australian retrun fitting eye ball

Part # 4xx

1-19/32

fittings

7


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Three-Piece Directional Eyeball Fitting 1½" Knock-In Features

1

Knocks into standard 1½" pipe Self-leveling for pipe and surface construction variations Adjustable eyeball available in four orifice sizes (1", ¾", ½", slotted)

2-11/32 1

Manufactured from engineered polymer UV-resistant ABS material

2

250 per case

3 15/16

Add’l orifice size part #s: ¾"-42xx, ½"-43xx, slotted-44xx (ie. 4201 = white ¾" orifice)

2-5/32

Part # 4xxx

1. 1.5" directional knock-in fitting, body 2. 100 series eyeball, 1" orifice 3. Standard eyeball locking ring

1-5/8

fittings

4" Adjustable Floor Return Fitting with Water Stop Diverter plate fits: Pentair/Sta-Rite

Features

5.983 4 3.727

Diverter plate molded as one piece – no glue joints for longer lasting commercial use

2

Integrated water stop to reduce leaks 2" x 1½" slip pipe adapter included Full 360-degree flow

1

Flow rate up to 80 GPM CAUTION: NOT to be used as a suction outlet Manufactured from engineered polymer UV-resistant ABS material Stainless steel screws 25 per case Also available as return diverter plate only for remodels, repairs, etc. p/n DIV0xxx 25 per case

3 1. Return fitting 2. Return diverter plate 3. 1-1/2 pipe adapter 4. 8x1-14" phillips flat head 316SS screw, qty 1

3

Part # 4DIVxxx, DIV0xxx

1.906 w/adapter 2.375 wo/adapter

Australian Return Fitting with Adjustable Eyeball 1" Knock-In Features

2-15/32

Knocks into 1" pipe, no glue necessary Self-leveling for out-of-square pipes Flange camouflages pipe and surface construction variations Adjustable eyeball available in three orifice sizes (1", ¾", ½")

2

Manufactured from engineered polymer UV-resistant polypropylene material

25/32

1

7/16

500 per case Add’l orifice size suffix: ¾"-B, ½"-C (ie. 501B = white ¾" orifice)

1-7/16

Part # 5xx

1. 1" Australian return knock-in fitting 2. 1" Australian return fitting eye ball

1-1/32

Three-Piece Directional Eyeball Fitting 1" Knock-In with Flange Features Knocks into standard 1" pipe, no glue necessary

1

3-11/16

Self-leveling for out-of-square pipes Adjustable eyeball available in four orifice sizes (1", ¾", ½", slotted) Large flange camouflages pipe and surface construction variations

2

Manufactured from engineered polymer UV-resistant ABS material 250 per case

2-1/8

1. 1" directional eyeball knock-in fitting body 2. 100 series eyeball, 1" orifice 3. Decorative cover eyeball locking ring

1

Add’l orifice size part #s: ¾"-52xx, ½"-53xx, slotted-54xx (ie. 5201 = white ¾" orifice)

1-1/32

Part # 5xxx 8

aquastar product catalog

1

3


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Rope Anchor Features

3-5/32"

Sturdy center pin Manufactured from engineered polymer UV-resistant ABS

2"

200 per case

3/8"

15/32" 1-1/2"

Part # 6xx

fittings

Commercial Rope Anchor with Stainless Steel Pin Features

2-9/32"

Press-fit stainless steel pin Integrated water stop to reduce leaks Manufactured from UV-resistant NSF 50/ABS/ASA Deep well for large hooks 3"

24 per case

2 1 Ø 3/8"

3"

1. Commercial rope anchor 2. 3/8" x 4" stainless steel pin

Part # CM6xx

4"

Three-Piece Directional Eyeball Fitting 2" Knock-In Features

1

2-11/32

Knocks into standard 2" pipe Self-leveling for pipe and surface construction variations Adjustable eyeball available in four orifice sizes (1", ¾", ½", slotted)

1 2

Manufactured from engineered polymer UV-resistant ABS material

3

250 per case Add’l orifice size part #s: ¾"-62xx, ½"-63xx, slotted-64xx (ie. 6201 = white ¾" orifice)

2-5/32 1-11/32

Part # 6xxx

1. 2" directional eyeball knock-in fitting body 2. 100 series eyeball, 1" orifice 3. Standard eyeball locking ring

2-1/16

Pool Wall Step Features

4-15/16"

Non-skid surface on step Manufactured from engineered polymer UV-resistant NSF-rated/ABS/ASA

2-7/32"

Extra large locking feature on outer lid Full 15" length required by many states Set of three 15"

Also available in blue 4 sets per case

6"

Part # 7xx fittings

9


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Three-Piece Directional Eyeball Fitting 1½" MPT Features

3

2-3/8

Screws into 1½" FPT Adjustable eyeball available in four orifice sizes (1", ¾", ½", slotted)

1-27/32

"A"

Manufactured from engineered polymer UV-resistant ABS material

2

250 per case Add’l orifice size p/n: ¾"-82xx, ½"-83xx, slotted84xx (ie. 8201 = white ¾" orifice)

1 11/16

1/2

25/32

1. Directional fitting body 2. Directional fitting eyeball 3. Directional fitting nut

1 1/2" straight pipe thd.

Part # 8xxx

fittings

Three-Piece Directional Eyeball Fitting 1½" Slip Insider Features

1

Slip and glue into standard 1½" pipe Adjustable eyeball available in four orifice sizes (1", ¾", ½", slotted) Manufactured from engineered polymer UV-resistant ABS material

2-11/32

250 per case 1

Add’l orifice size part #s: ¾"-SL82xx, ½"-SL83xx, slotted-SL84xx (ie. SL8201 = white ¾" orifice)

2

15/16 3

2-5/32

Part # SL8xxx

1. 1.5" directional slip insider, body 2. 100 series eyeball, 1" orifice 3. Standard eyeball locking ring

1-19/32

½" Extender with Eyeball and Nut 1½" MPT Ø 2-3/32"

Features Screws into 1½" FPT

U.S. patent 8,250,682

Great for remodels, adds ½" for new finish

Manufactured from engineered polymer UV-resistant ABS material

Finishes flush, no protrusion past the surface Eliminates the need for costly removal of old fittings (just screw in) Stack more than one for longer extension

1-1/4"

250 per case Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. ASD101B = white ¾" orifice)

1 1/16"

2

3

1. 0.5" extender body 2. 0.5" extender eyeball 3. 0.5" extender nut

Eyeball available in four orifice sizes (1", ¾", ½", slotted)

Part # ASDxxx

1-7/8" – 11.5" thread

½" Extender with Eyeball and Nut 1¼" MPT Features U.S. patent 8,250,682

Fits into Swimquip/ Sta-Rite #8428 and 8429 (the part with four brass threaded inserts)

Can be extended by stacking with p/n ASDxxx

Great for remodels, adds ½" for new finish Finishes flush, no protrusion past the surface Eliminates the need for costly removal of old fittings (just screw in)

10

Ø 2-1/4"

Threads into 1¼" FPT

3

3/4" 2

Eyeball available in four orifice sizes (1", ¾", ½", slotted)

1"

Manufactured from engineered polymer UV-resistant ABS material

1

250 per case Add’l orifice size suffix: ¾"-B, ½"-C slotted-D (ie. BSASD101B = ¾" orifice)

aquastar product catalog

2-1/16"

1 7/8" -11.5 THD

Part # BSASDxxx

1. 1/2" extender x 1-1/4" MPT body 2. 100 series eyeball, 1" orifice 3. Eyeball locking ring


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

AquaStop® Pipe Sleeve with Threaded Slurry Seal Cap and O-ring 1½"/ 2"/ 2½"/ 3" Features

2

Similar to original AquaStop® pipe sleeve (see p/n WSxxx) except engineered with additional female thread for polypropylene cap and gasket seal

3

Excess glue will not stick to polypropylene cap Apply with PVC glue to drain pipe prior to pool finish with cap attached to prevent slurry from going into pipes (remove cap after pool finish and acid wash)

1.5" 2" 2.5" 3"

AquaStop® pipe sleeve prevents leaks after start-up

2 15/16" 3 7/16" 3 15/16" 4 9/16" 1.5" 2" 2.5" 3"

Helps avoid costly repairs Available in four sizes Manufactured from engineered PVC and polypropylene materials 250 per case

1

Part # BC2000-x

1.5" 2" 2.5" 3"

27/32" 27/32" 27/32" 1 1/8"

1. Water stop with internal threads 2. Water stop threaded cap 3. Water stop o-ring

1 29/32" 2 3/8" 2 7/8" 3 17/32"

fittings

Bushing to Convert 2" to 1½" Features Ø 2-3/8"

BU101-2x1.5: Converts pipes from 2" to 1½" NSF-approved materials Manufactured from engineered PVC materials 25 per case

1-19/32"

1-1/16"

1-29/32"

Part # BU101-2x1.5

Bushing to Convert 4" to 3" Features BU101-4x3:

Ø 4-7/8"

Converts the BFB101 or other pipes from 4" to 3" NSF-approved materials

3-17/32"

Manufactured from engineered PVC materials 25 per case

3-17/32"

BU101-4x3

3-15/16"

Part # BU101-4x3

1½" Safety Grate Insert (for Use on Fittings Only) 1½" MPT Ø 2.149"

Features Manufactured from UV-resistant ABS material Threads directly into 1½" FPT CAUTION: Not to be used as a suction outlet under any circumstances 250 per case

.535"

.575"

Part # CFMxxx

1 1/2" NPT

fittings

11


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Winterizing Cap with O-ring 1½"/ 2"/ 2½"/ 3" Features Threads into FPT Seals off pipes for winterizing Available in four sizes (1½", 2", 2½", 3") Manufactured from UV-resistant ABS material Silicone O-ring for extra tight seal 250 per case Add’l size suffix: 2"-2, 2½"-2.5, 3"-3 (ie. CS101-2 = white 2" cap)

1

1.5" 2" 2.5" 3"

2

1 29/32" 2 3/8" 2 7/8" 3 17/32"

1. Threaded cap 2. O-ring

Part # CSxxx-x

fittings

Three-Piece Decorative Cover Features Screws into 1½" FPT Great for remodels, quickly changes color of existing 1022s or other fittings Eliminates the need for costly removal of old fittings (just screw in) Large flange camouflages pipe and surface construction variations Eyeball available in four orifice sizes (1", ¾", ½", slotted) Manufactured from engineered polymer UV-resistant ABS material 250 per case Add’l orifice size suffix: ¾"-B, ½"-C, slotted -D (ie. DC101B = white ¾" orifice)

1-15/32"

Ø 1" Ø 3/4" Ø 1/2"

3

Ø 3-11/16"

1-3/32"

1-1/2" MPT thread 2

1

1. 1-1/2" MPT to eyeball body 2. 100 series eyeball, 1" orifice 3. Decorative cover eyeball locking ring

Part # DCxxx

Standard Eyeball and Nut Replacement Features Change the color or size of your eyeball and nut Fits all AquaStar and other brands’ female thread and standard eyeball and nut fittings 50 per case Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. ENB101 = white ¾" orifice)

1-5/8

5/16

1 1

2

27/32

1. Eyeball, 1" orifice 2. Eyeball locking ring

Part # ENxxx

Large Wall Fitting with Threaded O.D. (Fits 1½" Pipe) for Fiberglass/Vinyl Features Standard 1022 fits outside 1½" pipe, threads inside 2" pipe

3-15/32

1½" FPT in front face

1-29/32 2-11/32

1-25/32

Large flange camouflages pipe and surface construction variations See also decorative cover p/n DCxxx to make existing 1022s like new with different colors

5/16

Manufactured from engineered polymer UV-resistant ABS material 250 per case

1-23/32

Part # ES1022xx 13/16

12

aquastar product catalog 3-7/16

Accepts 1-5/8 Eyeball 1-1/2" socket


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Large Wall Fitting with Water Stop (Fits 1½" Pipe) Features

3-15/32

Fits outside 1½" pipe 1½" FPT in front face Similar to standard 1022 but with integrated water stop to reduce leaks Large flange camouflages pipe and surface construction variations See also decorative cover p/n DCxxx to make existing 1022s like new with different colors Manufactured from engineered polymer UV-resistant ABS material 250 per case

1-29/32

3-15/32 5/16

1-29/32 2-11/32

1-25/32 1-23/32

5/16

Part # ES1022WBxx

2-13/32 Hex

fittings

1-23/32

Large Wall Fitting with Threaded O.D. (Fits 1½" Pipe) with Lock Nut and Gasket For Fiberglass/Vinyl Features

13/16

Standard 1022 fits outside 1½" pipe, threads inside 2" pipe

3-7/16

1½" FPT in front face

1-1/2" socket

Large flange camouflages pipe and surface construction variations

1-1/2" straight pipe thd.

See also decorative cover p/n DCxxx to make existing 1022s like new with different colors

3/8

Manufactured from engineered polymer UV-resistant ABS material 250 per case

Accepts 1-5/8 Eyeball

1-5/16

Part # ES1022Vxx

2" straight pipe thd.

Extended Venturi Tee for Gunite with Removable Jet 9-3/4"

Features

8-1/2"

Fits: 1½" x 1½" x 1" Back 1½" I.D., front 1½" O.D., 1"x ¾" S/S venturi tee Universal size for great air and water mix Removable jet has bayonet lock for secure positioning Manufactured from white NSF-rated PVC 17-20 GPM for best venturi action Use p/n VSJW102 (jet wrench) for removal or installation of jet 25 per case

1-29/32"

7/8"

1/2"

1 2

1. Venturi jet 2. Venturi tee

Part # EVT101

2" x 4" Gutter Deck Drain (Fits 2" Pipe) Features Fits over 2" pipe 1½" threaded FPT inside for pressurizing/ winterizing Manufactured from engineered polymer UV-resistant PVC material (p/n GDD101 is manufactured from engineered polymer UV-resistant ABS material) 1½" reducer bushing available p/n BU101-2x1.5

4-3/8"

½" stackable extender available p/n PE20101

3

3-15/16"

2

Stainless steel screws Also available as grate only with two screws

2-7/8"

CAUTION: Not to be used as a suction outlet under any circumstances

2-7/16"

1

2-7/8" 4"

25 per case Grate only p/n GDDLxxx 25 per case

Part # GDDxxx

Ø 2-3/8"

1. 2" x 4" gutter/deck drain body 2. 2" x 4" gutter/deck drain cover 3. #10 flat head phillips screw

fittings

13


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

2" Hydrostatic Relief Valve Features

2" - 11-1/2 MPT

2-5/16

Equalizes pressure for high water tables

2

Fins enable easy twist for installation and removal

1. Hydrostatic relief valve body 2. Hydrostatic relief valve cap 3. Hydrostatic relief valve retainer 4. Spring, hydrostatic relief valve 5. O-ring, hydrostatic relief valve 6. Reducer bushing, 1-1/2 MPT

2-1/32

Fits any AquaStar and most other manufacturers’ 2" threads

5 9/16

Manufactured from superior UV-resistant engineered polymers

1

1-1/2 - 11-1/2 MPT

Includes 2" x 1½" reducer bushing

4

Reducer bushing must be glued into hydrostatic relief valve using ABS glue

3

1-5/16

25 per case White, Black and Dk. Gray colors available

6

Part # HVxxx

fittings

Pump Strainer Cover, Thread Style Features

7-1/16

Universal lid adapts to other brands’ pumps, replaces p/n SPX3100D Manufactured from superior uv-resistant engineered polymers

6

25 per case

6" OD x 4 TPI square thread 1-13/16 31/32

Part # HWPL100

Plaster Cap with Magnet-Finding Metal Insert 1½"/ 2" Features Threads into 1½" or 2"FPT Seals off pipes during pool finish to allow for clean threads Metal insert in cap makes it easy to locate pipes with a magnet after plastering

1

Available in two sizes (1½", 2") Manufactured from engineered polymer UV-resistant ABS material 250 per case

1.5" 2" 2.5" 3"

Add’l size suffix: 2"-2 (ie. JMCP109 = 1½" cap JMCP109-2 = 2" cap)

2

1 29/32" 2 3/8" 2 7/8" 3 17/32"

1. Threaded cap 2. O-ring

Part # JMCP109

½" Extender with Plaster Cap and Three-Piece Decorative Cover Features Screws into 1½" FPT Removable plaster cap prevents slurry from entering pipes during pool finish, keeps threads clean Great for old 1022 fitting remodels, adds ½" for new finish Eliminates the need for costly removal of old fittings (just screw in) Stack more than one for longer extension

14

Ø 1" Ø 1/2" Ø 3/4"

Large flange camouflages pipe and surface construction variations

1-1/2" MPT thread

7

Manufactured from UVresistant ABS material

4

125 per case

aquastar product catalog

7/16"

2 5

Eyeball available in four orifice sizes (1", ¾", ½", slotted)

Add’l orifice size suffix: ¾"-B, ½"-C, slotted-D (ie. MP101B = ¾" orifice)

2-9/32" 1-3/32"

Ø 3-11/16"

6

Part # MPxxx

1. 1-1/2" MPT to eyeball body 2. 100 series eyeball, 1" orifice 3. Decorative cover eyeball locking ring 4. 1/2" extender body

3

1

5. Umbrella stand, cap 6. Oring, float seal 7. Metal cap insert


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Shell Wall Step Features Install into side wall

3-3/4"

Decorative shell look for step Non-skid surface on step Manufactured from UV-resistant ABS/ASA

9-7/16"

Adds special look and feel to interior finish Solid exterior grip on full circumference Set of three 4 sets per case 7"

Part # SSxxx

3-15/32"

fittings

90 Degree Sweep Ells Socket x Spigot Features

1-7/8"

2-3/8"

NSF-approved PVC material Universal fit

2" spigot 1 1/2" spigot

Title 20/24 compliant Available in 1½" and 2" S x Spg

3-9/16"

2-31/32"

50 per case Available in White Ø 2" socket Ø 1 1/2" socket

Part # SWAxxx – 1½" S x Spg, SWCxxx – 2" S x Spg

SWAxxx

SWCxxx

90 Degree Sweep Ells Socket x Socket Features

3-1/16

3-9/16

NSF-approved PVC material Universal fit Title 20/24 compliant Available in 1½" and 2" S x S

2-31/32

3-9/16

50 per case Available in White 1-1/2" socket

2" socket

Part # SWBxxx – 1½" S x S, SWDxxx – 2" S x S

SWBxxx

SWDxxx

Straight Flow Insert 1½" MPT Features

Ø 1-3/4"

Threads directly into 1½" FPT Keeps flow in a straight line eliminating backflow problems due to twisted eyeball, reducing call backs especially with commercial spas

1-7/32"

Great for in-floor footjets Available in three orifice sizes (1", ¾", ½") Manufactured from engineered polymer UV-resistant ABS material 250 per case Add’l orifice size suffix: ¾"-B, ½"-C (ie. TM101B = ¾" orifice)

25/32"

11/16"

Part # TMxxx fittings

15


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Therapeutic Spinner, Fits 1½" Features

Ø2-3/16

1 3

Screws into any existing 1½" fitting

2

Easily converts 1½" return fittings to therapeutic spinner action, great for spas Stainless steel ball bearing race

1-27/32

Manufactured from engineered polymer UV-resistant material 100 per case

1. Therapeutic spinner body 2. Therapeutic spinner bearing 3. Therapeutic spinner spinner

1-13/32 29/32

Part # TSxxx

fittings

7½" Umbrella Stand with Sleeve and Center Cap Features

Ø 2"

Ø 2-15/16"

Great for umbrellas, volleyball poles and tiki torches

2

Install into hole in gunite, apply pool finish to top of stand, install decorative sleeve and center cap after pool finish

2"

Can be installed on floor, step or deck Integrated water stop reduces leaks Manufactured from engineered polymer UV-resistant ABS or material

1 7-3/32"

25 per case

7-13/32"

1. Umbrella stand, 7½", body 2. Umbrella stand, cap

Part # USxxx

5" Umbrella Stand with Sleeve and Center Cap Features

Ø 2"

Ø 2-15/16"

Great for umbrellas, volleyball poles and tiki torches Install into hole in gunite, apply pool finish to top of stand, install decorative sleeve and center cap after pool finish

2

Can be installed on floor, step or deck Integrated water stop reduces leaks Manufactured from engineered polymer UV-resistant ABS material 25 per case

5-9/32"

1

1. Umbrella stand, 5", body 2. Umbrella stand, cap

Part # SMUSxxx

Umbrella Stand Cap with Gasket Seal 1½" MPT Features

Ø 2"

Threads into 1½" FPT Seals off pipes during pool finish to allow for clean threads Decorative option for winterizing pipes Manufactured from engineered polymer UV-resistant ABS material

1

Silicone O-ring for extra tight seal 250 per case 2

Part # USCGxxx 16

aquastar product catalog

1. Umbrella stand, cap 2. O-ring


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

4"S x 4"S x 2½"S x 2½"S Horizontal T with Two 4" x 3" Reducer Bushings Features NSF-approved materials Universal fit for AquaStar skimmer bottom, and "B" 2 port PVC sumps Converts two 2½" spigot to 4" or 3" T Comes complete with two 4" x 3" reducer bushings p/n BU101-4x3 Schedule 40 white PVC

2

12 per case

1

Ø 2-7/8"

3-7/16"

fittings

3-1/8"

1. 2.5" socket to 4" socket adapter bushing, qty 2 2. 4" spc. to 3" socket adapter

5-3/16"

4-17/32"

3-17/32"

w/o 3" adapter

Part # BFB101

Pipe Extenders (1½", 2") Features

2-1/16

PE15101 slips outside 1½" pipe and inside 1½" pipe for easy in-trench pipe extension

2-1/32 2" slip insider

PE20101 slips outside 2" pipe and inside 2" pipe for easy in-trench pipe extension

1/8

NSF 50 approved materials Made from PVC

2-1/2

250/case 1-1/4

2" spigot

1/8

2-3/8

1-19/32 1-19/32 1 1/2" slip insider

1/8

2-1/2 1-1/4

1 1/2" spigot

Part # PE20101 – 2", PE15101 – 1½"

1/8 1-7/8

fittings

17


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Socket and Jet Removal Tool for Most Major Brand Return Fittings Features Perfect for homeowners and pool service professionals to make adjustments to jet or directional eyeball locking ring

Ø 1-3/4"

Ø 15/16"

Manufactured from super strong GF nylon 11-31/32"

Two size hex sockets on end of wrench allow for jet removal or adjustment of most styles

10-1/8"

Fits most adjustable eyeball locking rings

2"

9/16" HEX

25 per case

Part # VSJW102

fittings

AquaStop® Pipe Sleeves (1" / 1.5" / 2" / 2.5"/ 3") The most common cause of leaks in a pool is the surface materials not bonding with the pipes. Our AquaStop® pipe sleeves provide a longer surface area for increased bonding with the pool finish. This creates a barrier around the pipe to prevent water from leaking.

Features Prevents leaks Helps avoid costly repairs

Plaster

Water Stop

Available in five sizes Manufactured from engineered polymer PVC material

Gunite Pipe

250 per case

Part # WSxxx WS801 1" WS901 1½" WS1001 2" WS1101 2½" WS1201 3"

Ø 1" Ø 1.5" Ø 2" Ø 2.5" Ø 3"

18

aquastar product catalog

2-11/32" 2-15/16" 3-7/16" 3-15/16" 4-9/16"

11/16" HEX


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

Wall/Deck Spouts Features

NEW

Creates an adjustable water stream from the tile line or deck Manufactured from UV-resistant ABS material Fiberglass model (p/n WJFxxx) includes face plates, body, gaskets, plug, screws, plumbing adapter, single and dual stream nozzles

fittings

Gunite model (p/n WJxxx) includes face plates, body, plug, plumbing adapter, single and dual stream nozzles 25 per case

Part # WJxxx, WJFxxx

5 2x ~4-7/8

2x 4-1/4

2x ~4-1/2

9

3

2x ~3-3/16

7

2 4 ~3-31/32

6

4-5/8 ~19/32

1

~4-1/32

8

~1-11/32 1" spc.

3/4" soc. 1/2" soc.

1. Body, wall jet 2. Eye ball, 1/2 mpt, wall jet 3. Single nozzle, wall jet 4. Flow insert, wall jet 5. Cover, wall jet 6. *Gasket, wall jet 7. Dual nozzle, wall jet

8. Pipe adapter, wall jet 9. *Screw, wall jet 10. Plug, wall jet *not included with WJxxx

~3-31/32

fittings

19


drains 20

aquastar product catalog


aquathunder spa jets


AquaThunder 速 Therapeutic Spa Jets

NEW

spa jets

AquaThunder spa jets are designed for maximum efficiency. The soothing water/air combination will give your next spa project great therapeutic massage action. The PVC housing makes assembly a breeze and threaded interchangeable jet barrels are available for a variety of combinations. The adjustable jet fitting is made with a flange so it won't interfere with the adjustment ring on the jet barrel. The pool finish can go right up against the outer flange giving it a very clean look.

22

aquastar product catalog


STANDARD COLORS

101

102

103

105

108

OPTIONAL COLORS

104

106

107

AquaThunder Jet Barrel Features

NEW

Ø 25/32

Clean scallop design Adjustable front flange Threaded for easy assembly Ø 3-15/32

Made from ABS engineering grade resin

15/32"

Interchangeable with most popular brands

Ø 2-1/8

3-18/32" 4-5/32"

25 per case

Part # ATBxxx

Ø 1-15/32

AquaThunder Jet Barrel with Therapeutic Spinner Features

NEW

1-11/16

Clean scallop design Adjustable front flange 3-15/32

Threaded for easy assembly Made from ABS engineering grade resin

2-1/8

15/32

Interchangeable with most popular brands Stainless steel ball bearing race for smooth and durable spinning action

spa jets

3-18/32 – 4-5/32

25 per case

Part # ATBTSxxx

1-15/32

AquaThunder Jet Fitting with Flange Features

Ø 4-3/32

NEW

Ø 2-1/8

Threaded design screws to housing Designer outer flange Made from ABS engineering grade resin Interchangeable with most popular brands

3/8"

25 per case

1-9/16" 2" MPT

Part # ATFxxx

1-1/16"

AquaThunder Jet Housing Features

NEW

Made from PVC

Ø 2-27/32

1" soc. (Air)

Separate water and air tubes Interchangeable with most popular brands

1-1/2" soc. (Water) Ø 2-5/32

25 per case

4-3/4 3-15/16

Ø 3-7/32 5-3/32 Ø 1-19/32

Part # ATHxxx spa jets

23


fittings

Part Numbers / Colors

24

aquastar product catalog


flowstar 速 skimmers


Flow Star ® Standard Skimmer with Water Stop Face, Float Assembly, Basket, Lid and Adjustable Collar

Now available with square lid

Features Adjustable collar Weir plate with easy snap in and out locks Self-contained gunite grip, water stop on face plate to prevent water leaks Large self-contained basket with lock-in feature (will not float) Pre-installed O-ring for float assembly Underwater dampers on face plate for noise reduction on weir plate – especially on windy days Super strong engineered polymer upper housing Extra heavy duty PVC lower unit (does not require transitional glue) 2½" outside slip and 2" inside slip (outside skimmer) 2" threads for pressure testing (inside skimmer) Built-in overflow or fill line knock out Upper housing has pre-cut rebar cut outs with pre-drilled holes for tie wire Additional box inside skimmer box for basket, float assembly and weir plate (so assembly does not get lost on job site) Skimmer Lid and Collar G154 UV tested NSF 50 approved for commercial use, 25 GPM min, 55 GPM max. Approved for residential use up to 100 GPM Optional custom name/logo engraved on lid (requires minimum 100 piece lid order) 1 per case

skimmers

Optional vacuum plate with snap-in lug can be glued in under lid for easy storage p/n SK43xx

Part # SKR1xx STANDARD COLORS 101 102

105

15-25/32 10-9/32 6-1/16

108

103

1-5/16

3

12-29/32 10-1/4

2 5

8-11/16 19-25/32 4 8

2-1/2" SP. X 2" SOC. X 2" NPT

Skimmer with square lid: p/n SKR164xx Available without lid and collar: p/n SKR1NL 01 (white only)

SPS 3 and NSF 50 Compliant 26

aquastar product catalog

7

6

1. Skimmer, body, concrete/gunite 2. Collar, skimmer 3. Lid, skimmer 4. Skimmer, float assy.

5. Basket, skimmer 6. Weir assy., skimmer 7. O-ring, #257, float seal 8. 2" NPT port plug

1


Flow Star ® Standard Skimmer with Flush Face, Float Assembly, Basket, Lid and Adjustable Collar

Now available with square lid

Features Adjustable collar Weir plate with easy snap in and out locks Large self-contained basket with lock-in feature (will not float) Pre-installed O-ring for float assembly Underwater dampers on face plate for noise reduction on weir plate – especially on windy days Super strong engineered polymer upper housing Extra heavy duty PVC lower unit (does not require transitional glue) 2½" outside slip and 2" inside slip (outside skimmer) 2" threads for pressure testing (inside skimmer) Built-in overflow or fill line knock out Upper housing has pre-cut rebar cut outs with pre-drilled holes for tie wire Skimmer Lid and Collar G154 UV tested NSF 50 approved for commercial use, 25 GPM min, 55 GPM max. Approved for residential use up to 100 GPM Optional custom name/logo engraved on lid (requires minimum 100 piece lid order) 1 per case

Part # skr2xxx 14-15/16

STANDARD COLORS 101

105

102

108

3

1-1/4

10-7/32

10-3/16

5-1/4

2

5

7-7/16

103

skimmers

Optional vacuum plate with snap-in lug can be glued in under lid for easy storage p/n SK43xx

19-21/32

7 4

Skimmer with square lid: p/n SKR264xx Available without lid and collar: p/n SKR2NL01 (white only)

SPS 3 and NSF 50 Compliant

2-1/2" spigot x 2" socket x 2" NPT

1. 2. 3. 4. 5. 6. 7.

Skimmer, body, concrete/gunite Collar, skimmer Lid, skimmer Skimmer, float assembly Basket, skimmer Weir assembly, skimmer O-ring, #257, float seal

6

1

skimmers

27


Flow Star ® Skimmer with Narrow 9" Deep Throat, Float Assembly, Basket, Lid and Adjustable Collar for Vinyl/Fiberglass

Now available with square lid

Features Adjustable collar Weir plate with easy snap in and out locks Large self-contained basket with lock-in feature (will not float) Pre-installed O-ring for float assembly Underwater dampers on face plate for noise reduction on weir plate – especially on windy days Super strong engineered polymer upper housing Extra heavy duty PVC lower unit (does not require transitional glue) 2½" outside slip and 2" inside slip (outside skimmer) 2" threads for pressure testing (inside skimmer) Built-in overflow or fill line knock out Upper housing has pre-cut rebar cut outs with pre drilled holes for tie wire Additional box inside skimmer box for basket, float assembly and weir plate (so assembly does not get lost on job site) Skimmer Lid and Collar G154 UV tested NSF 50 approved for commercial use, 25 GPM min, 55 GPM max. Approved for residential use up to 100 GPM Optional custom name/logo engraved on lid (requires minimum 100 piece lid order) Designed to work with allSTANDARD existing vinyl liner COLORS steel, polymer or fiberglass pool walls 101 105 1 per case

skimmers

102

108

103

18-11/16

STANDARD COLORS 101

105

102

108

103

Optional vacuum plate with snap-in lug can be glued in under lid for easy storage p/n SK43xxx

Part # skrvfl3Nxxx (vinyl) Part # skrffl3Nxxx (fiberglass)

Decorative cover removed to show screw locations

10-23/32 9-1/16

9 2-15/16

2 8-17/32

6-15/16 19-15/16

5 2-5/16

Skimmer without float assembly p/n SKRV3Nxxx (vinyl) / SKRF3Nxxx (fiberglass). Skimmer with Square Lid p/n SKRFFL3N64xxx (fiberglass with float assy), SKRVFL3N64xxx (vinyl with float assy), SKRF3N64xxx (fiberglass without float assy) SKRV3N64xxx (vinyl without float assy) Available without lid/collar p/n SKRFFL3NNL01 (fiberglass with float assy-white only), SKRVFL3NNL01 (vinyl with float assy-white only), SKRF3NNL01 (fiberglass without float assywhite only), SKRV3NNL01 (vinyl without float assy-white only)

SPS 3 and NSF 50 Compliant 28

aquastar product catalog

3

7 2-1/2" Sp. x 2" Soc. x 2" NPT

1. Skimmer, body, concrete/gunite 12 2. Collar, skimmer 3. Lid, skimmer 4. Skimmer, float assembly 5. Basket, skimmer 6. Weir assembly, skimmer 7. O-ring, #257, float seal 8. 2" NPT port plug 9. Gasket, extender 9" & 12", skimmer 10. Face frame, extender 9" & 12", skimmer 11. #12 x 1-1/4" lg. (vinyl) / #12 x 1-3/4" lg. (fiberglass), flat head phillips, type b, 316 ss

4

11

10

9

8

1 6


Flow Star® Skimmer Options STANDARD COLORS

102

103

105

108

OPTIONAL COLORS

104

106

107

15-25/32

12-29/32 10-1/4

1-5/16

Standard Round Lid

101

10-9/32 6-1/16

SKR1xxx (Standard Skimmer with Waterstop Face Dual Bottom Port 2½" Spigot x 2" Socket)

8-11/16

SKR1xxxD (Single Bottom Port 4" Socket)

19-25/32

SKR1xxxF (Single Bottom Port 6" Socket) Page 84

Standard Round Lid

1-1/4

14-15/16 10-7/32

10-3/16

SKR2xxx (Standard Skimmer with Flush Face Dual Bottom Port 2½" Spigot x 2" Socket)

7-7/16

SKR2xxxD (Single Bottom Port 4" Socket)

19-21/32

SKR2xxxF (Single Bottom Port 6" Socket) 2-1/2" spigot x 2" socket x 2" NPT

Page 85

18-11/16

Narrow 9" Deep Round Lid

5-1/4

9

10-23/32 9-1/16

2-15/16

SKRVFL3Nxxx with Float Assembly and SKRV3Nxxx without Float Assembly (Dual Bottom Port 2½" Spigot x 2" Socket) 8-17/32

6-15/16 19-15/16

SKRVFL3NxxxD and SKRV3NxxxD (Single Bottom Port 4" Socket) 2-5/16 2-1/2" spigot x 2" socket x 2" NPT

Page 86

SKRVFL3NxxxF and SKRV3NxxxF (Single Bottom Port 6" Socket)

12-29/32 6-3/16

10-1/4

8-11/16

SKR164xxx (Standard Skimmer with Waterstop Face Dual Bottom Port 2½" Spigot x 2" Socket) SKR164xxxD (Single Bottom Port 4" Socket)

skimmers

Standard Square Lid

3-27/32

SKR164xxxF (Single Bottom Port 6" Socket) Page 84

2-1/2" spigot x 2" socket x 2" NPT

Standard Square Lid

2-1/8

15-1/32 10-13/32

10-3/16

5-13/32

7-7/16 20-1/2

SKR264xxx (Standard Skimmer with Flush Face Dual Bottom Port 2½" Spigot x 2" Socket) SKR264xxxD (Single Bottom Port 4" Socket) SKR264xxxF (Single Bottom Port 6" Socket)

Narrow 9" Deep Square Lid

Page 85

2-1/2" spigot x 2" socket x 2" NPT

18-25/32 9-5/32

2-15/16 6-15/16

10-23/32 9-1/16

8-17/32

21-5/8

2-5/16

SKRVFL3N64xxx with Float Assembly and SKRV3N64xxx without Float Assembly (Dual Bottom Port 2½" Spigot x 2" Socket) SKRVFL3N64xxxD and SKRV3N64xxxD (Single Bottom Port 4" Socket) SKRVFL3N64xxxF and SKRV3N64xxxF (Single Bottom Port 6" Socket)

Page 86

2-1/2" spigot x 2" socket x 2" NPT

skimmers

29


SKIMMER ACCESSORIES STANDARD COLORS

101

102

103

105

Skimmer Basket

108

OPTIONAL COLORS

50/case

Float Assembly

107

Stack multiple collars to reach desired deck or bond beam height Fits into AquaStar and most standard round skimmer collars (Sta-Rite/Pentair)

Part # SECxxx

20/case

Weir Plate Assembly O-ring gasket seals and locks float to remain at desired level during on and off pump cycles

skimmers

Part # SKFL101

106

3" Skimmer Extension Collar Large self-contained basket locks in to remain in place during on and off pump cycles

Part # SK6

104

24/case

Weir Clips

Weir plate noise is reduced with underwater tabs in front face

Part # SKWDxxx

24/case

Round Skimmer Lid Clips snap in/out for easy replacement

UV tested to latest standard Optional custom name/ logo insert p/n RTxxxA (min 100 pc order) Fits AquaStar and most standard round skimmer collars (Sta-Rite/Pentair)

Part # SK9xxx

30

aquastar product catalog

Set of 2, 50 sets/case

Part # RTxxx

25/case


SKIMMER ACCESSORIES STANDARD COLORS

101

102

103

105

Adjustable Round Skimmer Collar

108

OPTIONAL COLORS

106

107

Vacuum Plate

Adjustable collar levels out uneven surfaces (also fits Sta-Rite/Pentair)

Part # SK5xxx

104

20/case

Round Skimmer Lid and Collar

Snaps under skimmer lid for easy storage

Part # SK43xxx

25/case

Square Skimmer Collar

UV tested to latest standard Optional custom name/logo insert p/n RTxxxA (min 100 pc order) Fits AquaStar and most standard round skimmer collars (Sta-Rite/Pentair)

25/case

Square Skimmer Lid

Part # SK63xxx

Part # SK61xxx

skimmers

Part # SKRTxxx

6/case

Square Skimmer Lid and Collar

24/case

Part # SK64xxx

6/case

skimmers

31


drains

pool cleaners

32

aquastar product catalog


StarzTruck® Automatic Suction Pool Cleaner for Concrete & Vinyl/Fiberglass Pools

Features Programmed movement for better cleaning Efficient, quiet operation Highly engineered for durability Simple installation, no additional tools required Vinyl/fiberglass or concrete Easy grip roll bar handle Private label grill insert available Patent-pending design Kit includes cleaner, nine connector hoses, one leader hose, regulator valve,  skimmer cone, safety vacuum lock wall fitting, flow gauge and owner’s manual Replacement parts and kits available from ProStar™ Replacement Parts, a division of AquaStar Pool Products For more information, visit ProStarReplacementParts.com or call 877-768-2717 1 per case

Part # SZTxxxx-H (concrete) SZTVxxxx-H (vinyl/fiberglass)

Includes flow gauge, hoses, regulator valve, skimmer cone and safety vacuum lock wall fitting

13-27/32 9-17/32

Part Numbers / Colors White/White/White/White* SZT0101-H Concrete SZTV0101-H Vinyl/Fiberglass

Grey/Black/Black/Grey* SZT0302-H Concrete SZTV0302-H Vinyl/Fiberglass Aqua Blue/White/White/White* SZT1601-H Concrete SZTV1601-H Vinyl/Fiberglass

pool cleaners

Black/Black/Black/Black* SZT0202-H Concrete SZTV0202-H Vinyl/Fiberglass 13-21/32 4-31/32

8-7/16

*Top/Bottom/Handle & Grill/Hose Rear flap tension adjustment

pool cleaners

33


StealthStar™ Automatic Pressure Side Pool Cleaner for All Pool Finishes

Features

coming soon!

Double Venturi jets enable quicker cleaning and more vacuum power Brushes and scours the floor and walls of any size pool Works separately from the rest of the pool on its own booster pump Handy filter bag catches debris before it gets trapped in your pump or filter, extending the life of your equipment Highly engineered for durability Simple installation, no additional tools required Works on all pool finishes Replacement parts and kits available from ProStarÂŽ Replacement Parts, a division of AquaStar Pool Products For more information, visit ProStarReplacementParts.com or call 877-768-2717 1 per case

Part # SSCxxxx-H

Part Numbers / Colors White/White/White* SSC0101-H

9-3/32

Aqua Blue/White/White* SSC1601-H

pool cleaners

Grey/White/White* SSC0302-H *Top/Bottom/Hose

13-11/32 9-23/32 7-9/32

16-3/32 59-3/8

34

aquastar product catalog


Chlorinators


CH100 Inline Chlorinator Chlorinators

Features

NEW

For permanent installation in return line on pressure side of pump, downstream of all equipment, in new or existing pools or spas Standard with 2-inch slip PVC fittings and adapters for 1 -1/2 in. Completely enclosed system – no escaping gases, so no special venting is required 50 PSI maximum operating pressure Features an external fine control valve that lets you adjust the feed rate to meet specific pool or spa needs Top-load large or small Trichlor or Bromine slow-dissolving tablets enables an effective, trouble-free way to sanitize your pool or spa 1 per case

Part # CH100 4

STANDARD COLORS White

1. CH1007 CH100 body 2. CH1008 bottom o-ring 3. CH1005 diverter tee 4. CH1004 3" threaded cap 5. CH1009 3" O-ring

5 16

15

6. CH1010 check valve 7. CH1015 1/2" MPT PVC plug 8. CH1016 2" x 1-1/2" S x S bushing, qty 2 9. CH1017 1/2" NPT x tube fitting w/nut, qty 2 10. CH1018 1/2" x short MPT nipple 11. CH1019 1/2" chlorine control valve 12. CH1026 5/8" OD chlorinator tube 13. CH1027 tube support spring 14. CH1029 screen 15. CH1030 standpipe adapter 16. CH1031 5/8" OD 18" tube (optional top feed)

14

7 1

6 2

10 11

8

9

3 9 12 13

36

aquastar product catalog


AquaStar Terms and Conditions General: All sales made by AquaStar® Pool Products, Inc. (AquaStar) are subject to these terms and conditions, unless otherwise agreed to in writing by a duly authorized officer of AquaStar. In all cases of conflict between these terms and conditions and the requirements of any purchase order, these terms and conditions shall prevail. Product Disclaimer: All illustrations, photographs and specifications in this publication are based on product information available at the time of printing. AquaStar reserves the right to make changes at any time without giving prior notice to colors, materials, specifications, part numbers and prices and to discontinue product or product components. Pricing: Prices, discounts, quotations and specifications are subject to change without notice and will be applied as in effect at time of shipment. If prices have increased, AquaStar will notify buyer prior to shipment. All prices are in U.S. dollars. Any sales, excise or similar tax for which AquaStar may be liable on any sale will be charged to and paid by the buyer. If buyer is a reseller, buyer is responsible for furnishing a resale certificate prior to purchase. Minimum Order: All orders must be a minimum of $50.00 (not including freight charges). Ordering: Fax order to 877.276.POOL (7665) or email to sales@aquastarpoolproducts.com. To ensure prompt and proper shipment please order by item #, color and product description. Be sure to include the correct item # (last two digits) for the color desired (i.e. 01=white, etc.). Freight: All shipments are FOB AquaStar warehouse. Routing is subject to AquaStar’s discretion. Free freight is offered for orders of $5,000 or more for shipment to the contiguous United States only. Billing: Unless payment is made by credit card, all new customer accounts are required to complete an AquaStar credit application and receive credit approval prior to shipment. Please pay by invoice per the terms on the sales invoice. This invoice is binding on the parties and their respective directors, officers, employees, agents, subcontractors, successors and permitted assigns. Contact AquaStar Accounting Department within 15 days of receipt if there are questions regarding the invoice or if you think the account is in error. There will be a $20.00 minimum service charge on all NSF or returned checks. If the invoice is not paid within the invoice terms, AquaStar may recover a service charge of 1½% per month (18% annual percentage rate) on the past due amount and any expenses and/or attorney’s fees incurred in connection with attempts to collect the outstanding balance. Claims: All shipments must be inspected for freight damage, concealed or otherwise, at time of receipt. Any damage or product shortage must be both noted on the freight bill and reported to AquaStar Accounting Department within 10 days of receipt. AquaStar is committed to assist with all shortage and damage claims. Returns/Credits: All returns must be authorized and accompanied by a Return Materials Authorization (RMA) number issued by AquaStar, which should be marked clearly on all returned cartons. Unauthorized returns will not be accepted. AquaStar will not accept returned merchandise after 90 days of shipment and/or not in original saleable condition. Saleable returns will be subject to a 45% restocking fee plus return freight charges. All credits for returns or other promotions are to be used towards purchases and will not be given cash refunds. Limited Warranty: AquaStar is committed to and takes pride in the quality products that it manufactures. Accordingly, AquaStar maintains high standards for the materials and workmanship that it invests in its products. AquaStar warrants its products to be free from defects in material and workmanship for a period of three years from the date of original installation. This limited warranty will be applicable only if the product manufactured by AquaStar is the sole and exclusive cause of a defect. Products that fail or become defective during the warranty period, except as a result of color-fading, improper installation, bad water chemistry, accidents or negligence on behalf of the owner, freezing, earthquakes, fire, floods or other acts of nature, shall be repaired or replaced at AquaStar’s option.

aquastar terms and conditions

37



AquaStar Fittings Catalog 10-26-2012