WellMate WM-6, 20 Gallon, Fiberglass, Bladder Pressure Tank

WellMate WM-6, 20 Gallon, Fiberglass, Bladder Pressure Tank

https://www.aquascience.net/

WellMate Pressure Tanks WellMate's tanks feature corrosion-proof composite construction that requires little or no maintenance, plus their light weight makes them easier and less costly to install. All materials meet stringent U.S. Requirements for water components and are NSF and/or FDA listed materials. WellMate continues its tradition of excellence by offering features and benefits steel tanks cannot match.

These rustproof WellMate pressure tanks are made with blow-molded, fiberglass wrapped, seamless construction. They won't rust, dent, or come apart at the seams because there are no seams, and a rugged base is included. Full fiveyear limited warranty with a one-year replacement labor allowance.

This tank now features the quick connector that snaps securely into place and is retained by an H-clip. See the photos below.

Note: All tanks are pre-pressurized at 38 PSI, and should always be set 2 PSI below the cut-in of your pressure switch. It is recommended to check tank pressure before installation. Pressure switch settings should not exceed a 20 PSI differential between cut in and cut out.

Fiberglass Tanks

Product Features nner liner: blow-molded polyethylene.

Outer shell: Filament wound with fiberglass tanks roving and epoxy resin.

Bladder: Heavy-gauge polyurethane (Separates air and water).

Bottom inlet/outlet assembly: high-impact PVC Air connection: Standard tire valve.

Pre-charge: 40 PSI Maximum operating pressure: 125 PSI Maximum temperature: 120 degrees Fahrenheit Connection: 1" MNPT (Male pipe thread) Quick Connect - see photos below

Contact US Aqua Science 301 Nooseneck Hill Rd Wyoming, RI (Rhode Island) 02898 Store Hours (EST) 7:00am - 5:00pm (Monday – Friday) 8:00am - 12:00pm Saturday Toll Free: 800-767-8731 Local: 401-539-0500 Fax: 401-539-8778 Email: info@aquascience.net https://www.aquascience.net/