A Complete Guide of Bored Piles You Don't Know Yet

A Complete Guide of Bored Piles You Don't Know Yet https://aprictc.com.ph/

Core Benefits of Bored Piles Piles of varying lengths can be extended into suitable bearing material through soft, compressible, or swelling soils.

Pile depths can be increased by allowing for frost penetration and seasonal moisture variation.

Large excavations and subsequent backfill are kept to a minimum.

There is less disruption to adjacent soil.

The vibration is low, which reduces disturbance to adjacent piles or structures.

Bored piles have higher capacities and potentially better economics than driven piles in many design situations.

Core Advantages of Driven piles Piles can be precast to precise dimensions.

Piles of any size, length, or shape can be built ahead of time and used on the job site. As a result, the work will be completed quickly.

A pile driven into granular soil compacts the adjacent soil mass, increasing the pile's bearing capacity.

The work is tidy and tidy. On-site supervision can be reduced to a bare minimum. The amount of storage space required is significantly reduced.

Driven piles can be used in places where drilling holes is not recommended due to the risk of encountering groundwater under pressure.

Bored Pilling Process A temporary steel cylinder, or sleeve, may be driven into the soil during the drilling process. This will remain in the upper portion of the hole until the pile is poured.

After drilling the hole, a structure of reinforcing steel rebar is built and lowered into the hole, and the hole is then filled with concrete.

Bored piling work must be performed by a bored piling contractor, such as APRICTC (the best construction company in the Philippines).

Drilling a vertical hole into the soil with a bored piling machine is the first step in implementing a bored pile.

Major Challenges to Bored Pile Foundation Bored piles, like any other deep foundation system, are current hurdles to the contractor. Because the drilling method is used to determine the type of soil, the contractor must conduct an extensive soil investigation and report.

The piling contractor uses the soil report and previous experience to determine the best drilling method that will cause the least amount of disturbance to the surrounding soil.

When the soil is cohesion less, such as sand, gravel, and silt, or the hole extends below the water table, steel cages or stabilizing mud.

This solution can be a very messy process that adds a significant amount of complexity to the project

Difference between Bored and Driven Piles A driven pile is built off-site under factory-controlled conditions, whereas a bored pile is built on-site and in place.

Material Bored Piles are concrete piles that are cast in place on the construction site.

Drilled Shafts, Mini Piles, Micro Piles, Drilled Displacement, Sectional Flight Auger (SFA), and Continuous Flight Auger (CFA) piles are examples.

Equipment A crane, hammer, piling rig, power pack (hydraulic or air-hammer and Bored Piles typically use a Drill Rig, Helper Crane, Spoil Handling (loader, skip pan, etc.), casing, slurry handling, cage erection template, concrete truck, and concrete pump vehicle.

Contact Us APRICTC Construction Multinational Avenue, Parañaque, Metro Manila, Philippines +639178076464 +63288262343