An 8 bit serial in parallel out (sipo) shift register is initially loaded with 00110101

An 8-bit Serial-in/Parallel-out (SIPO) shift register is initially loaded with 00110101. After two clock pulses, what data will the shift register contain if the serial input is HIGH? To Purchase This Material Click below Link http://www.tutorialoutlet.com/all-miscellaneous/an-8-bit-serial-in-parallel-outsipo-shift-register-is-initially-loaded-with-00110101-after-two-clock-pulses-whatdata-will-the-shift-register-contain-if-the-serial-input-is-high FOR MORE CLASSES VISIT www.tutorialoutlet.com

Connect Q' on one stage to K on the next stage.

Page 1 of 4 Module 3: Laboratory 2B: Shift Registers • • Clock all flip flops at the same time.

The J and K inputs on the first flip flop should always be different. 5. Compare the way data is clocked into the D-type shift register with that of the JK flip flop shift register.

6. Load the circuit E6B-2.MS7, shown in Figure 6B.2. Figure 6B.2: 74195 parallelload shift register 7. Simulate the circuit. The shift register should eventually fill with 1s. When this happens, press ‘L’ once. Does the output instantly change to a new pattern? After a few seconds, press ‘L’ again. Now what happens? Examine the help information for the 74195 to see how the shift/load input operates.

8. Load the circuit E6B-3.MS7, shown in Figure 6B.3. Page 2 of 4 Module 3: Laboratory 2B: Shift Registers Figure 6B.3: Pseudorandom pattern generator 9. Simulate the circuit. Record the output patterns in Table 6B.1.

Pattern ABCD Pattern 0 8 1 9 2 10 3 11 4 12 5 13 6 14 7 ABCD 15 Table 6B.1: Pattern generator output patterns 10. Experiment with different feedback inputs for the XNOR gate. What do you find?

Discussion: While reviewing your data and results, provide detailed answers to each of the following: Page 3 of 4 Module 3: Laboratory 2B: Shift Registers 1.

2.

3.

4. Why does the pattern in a shift register shift only one bit position each time it is clocked?

What pattern is not output by the pseudorandom pattern generator?

Which shift registers covered in this experiment require a clock pulse to load data?

Explain how to build a 20-bit shift register.

A Parallel-in/Serial-out (PISO) shift register is loaded initially with 1100. What will the register contain after two clock pulses if the serial input is low?

Question 2: What is the Modulus of a 4-bit Johnson Counter?

Question 3: What is the Modulus of a 5-bit Ring Counter?

Question 4: An 8-bit Serial-in/Parallel-out (SIPO) shift register is initially loaded with 00110101.

What data will the shift register have after five clock pulses if the serial input is HIGH? Question 5: A 74194 Universal shift register has a HIGH on the shift left data input, a LOW on the shift right data input, and it is loaded with 0101. What data will the shift register have after one clock pulse in the shift left mode?

Question 6: What function is performed by a 74194 Universal shift register if the select inputs are S1 = 1 and S0 = 0?

Question 1: A Parallel-in/Serial-out shift register is loaded initially with 1010. What will the register contain after two clock pulses if the serial input is LOW? Question 2: What is the Modulus of a 5-bit Johnson Counter?

Question 3: An 8-bit Serial-in/Parallel-out (SIPO) shift register is initially loaded with 00110101.

After two clock pulses, what data will the shift register contain if the serial input is HIGH? Question 4: A 74194 Universal shift register has a LOW on the shift left data input, a HIGH on the shift right data input, and it is loaded with 0110. What data will the shift register contain after two clock pulses in the shift right mode?

Question 5: What function is performed by a 74194 Universal shift register if the select inputs are S1 = 0 and S0 = 1? ate.