INSTRUCTIONS FOR BROTHER DCP T710W SETUP Brother DCP T710W is an Inktank refill system printer with advanced printing features. This printer supports Wi-Fi for easy wireless printing and an Automatic Document Feeder for multi-page scanning. The Brother DCP T710W setup is quite simple and easy if you go through the instructions given on this page.
UNBOXING & BASIC SETUP •
Start by unpacking your printer from the package.
•
Take out the box contents and keep them aside for later use.
•
Remove the protective tapes and covers from the printer.
•
Next, pull the paper tray out from the printer and open the output tray cover.
•
Load a paper stack into the tray and adjust it with the paper guides.
•
Refix the output tray cover and push the input tray into your printer.
•
Connect your printer to a wall outlet using the supplied power cord and turn it on.
•
Set your basic preferences such as language, country/region, date, and time.
•
Open the ink tank cover and remove the cap from the ink tank you are going to fill.
•
Open the ink bottle and remove the protective film from it.
•
Insert the ink bottle into the nozzle port of the ink tank and close the ink tank cover.
•
Fill the rest of the ink tanks and start installing the printer software on your computer using the Brother installation disc.
•
After installing the printer driver, verify the printer functionality.