ES-F™ Series Fascia
ES-F Fascia FASCIA COVER x 10'-0"
The old-school gravel stop and fascia of the past is no longer acceptable for most roof systems of today. Fascia systems must be tested and approved to meet the ANSI/SPRI ES-1 standard as required by the IBC.
FASCIA CANT x 10'-0" 6" CONCEALED SPLICE PLATE @ EACH JOINT MEMBRANE FLASHING (by OTHERS) 1/2"
1 1/4" ROOFING NAIL @ 12" o.c. MAX. (by OTHERS)
1 1/2"
Once again, with its line of fully tested Edge Systems, IMETCO demonstrates its commitment to our customers by providing a full line of performance-inspired fascia and coping systems.
SPECIFY
Features and Benefits: r r r r r r r r r r r r
ANSI/SPRI ES-1 approved Tested face dimensions up to 9½ inches Two-piece design 10-foot standard lengths standard (other lengths available) 24- and 22-gauge galvanized steel cant dams Concealed 6-inch splice plate Factory fabricated corners and accessories Does not penetrate the roof membrane No exposed fasteners Installs securely with various roof membrane thicknesses 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish Warranty available
1 3/4" 1/2"
1 1/4" ROOFING NAIL @ 12" o.c. MAX. (by OTHERS)
Product:
Face Size:
ES-F500
5.0 inches
ES-F650
6.5 inches
ES-F800
8.0 inches
ES-F950
9.5 inches
Materials and Coatings r r r r r
.040, .050 & .063 aluminum 24- and 22-gauge galvanized steel 24- and 22-gauge stainless steel Pre-finished Kynar® coated aluminum and steel standard Post-coated Kynar® custom colors available
–5–