Issuu on Google+

–1 –1– 1


Any Building In Any Place At Any Time Could Be Called Upon to Protect the Contents Within

The turn of the century brought a rash of severe weather events and the promise of a dynamic climate that will continue to produce these natural assaults. Experts around the world agree that we are at the precipice of an extreme weather era. Whether due to global warming or simply following cyclical trends, it seems clear that the frequency and severity of high-velocity wind events will continue to place demands on our structural environment. Some of the more notorious storms of the decade precipitated intensive study of the vulnerability of roofing systems by organizations such as the Roofing Industry Committee on Weather Issues (RICOWI) and Factory Mutual Global (FM). These studies revealed that the vast majority of all weather-related losses (75%) were due to roof failures, and of those, more than half were due to perimeter failure. As a result, building codes and standards have evolved to demand better design and performance of roofing systems. The 2003 and subsequent editions of the International Building Code (IBC) contain provisions requiring edge-metal flashings (copings, fascia, gravel stop) to be designed and installed in accordance with ANSI/ SPRI ES-1, “Wind Design Standard for Edge Systems Used with Low Slope Roof Systems.� 1504.5 Edge securement for low-slope roofs. Low-slope membrane roof system metal edge securement, except gutters, shall be designed and installed for wind loads in accordance with Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1, except the basic wind speed shall be determined from Figure 1609.

Although these studies and the adoption of the ES-1 standard by IBC are most directly attributable to the destruction inflicted by hurricanes, events such as straight-line winds and tornadic activity associated with common seasonal storms inflict wide-spread damage each year. FEMA has divided the United States into four zones that reflect the number and strength of extreme windstorms encountered in each region. The tables to the right clearly illustrate that no area is immune to wind-related roofing damage.

www.imetco.com


That’s Why We Bring You

PerformaEdge A line of performance-inspired Edge Systems from IMETCO

ES-1 Certification Edge Systems from IMETCO have successfully passed the three tests required by the ANSI/SPRI ES-1 standard: 1. RE-1: Roof Edge Termination Test The RE-1 test evaluates the perimeter attachment to a minimum holding power of 100 pounds per foot. The membrane is pulled at a 45-degree angle to the roof deck to simulate a billowing. Failure occurs when the membrane detaches from the edge termination, or the termination detaches from its mounting.

2. RE-2: Pull-off Test for Metal Edge Flashing RE-2 evaluates the strength of the metal edge flashing to ensure that the fascia system meets or exceeds the building’s calculated design wind pressure. An incremental load is applied to the face of the specimen and held for 60 seconds, then removed and increased in increments of 25 psf until 150 psf, then increments of 10 psf are applied thereafter. The results must meet or exceed the calculated design pressure of the building. Failure occurs with securement loss of any component of the roof edge, or deformation that would hinder weather protection at the edge.

3. RE-3: Pull-off Test for Metal Wall Coping RE-3 evaluates the strength of a metal coping cap to ensure that it meets or exceeds the building’s calculated design wind pressure. Incremental loads are applied as with the RE-2 test, where the load is applied to the face and top simultaneously. Failure occurs with the securement loss of any component of the roof edge system, or deformation that would hinder weather protection at the edge.

–3–


ES-FX™ Series Fascia

ES-FX Fascia FASCIA COVER x 10'-0"

IMETCO’s line of Edge Systems includes our strongest and most versatile fascia, the ES-FX. This extruded aluminum fascia is compatible with most of the roof systems marketed today. From the multi-ply builtup roofs to single ply systems to thicker modified bituminous membranes, the ES-FX fascia system can easily adjust to each one.

6" CONCEALED SPLICE PLATE @ EACH JOINT FASTENER @ 18"o.c. (by IMETCO)

1"

VARI-TIGHT FLASHING (by IMETCO) CANT DAM x 10'-0" MEMBRANE FLASHING (by OTHERS)

2 1/2"

1 1/4" ROOFING NAIL @ 12" o.c. MAX. (by OTHERS)

SPECIFY

Face dimensions of the ES-FX fascia system provide coverage for up to three nailers. Engineered with its Vari-tightTM flashing component, ES-FX allows for installation with various roof membrane types and thicknesses without any penetration of the membrane. The Vari-tightTM screws supplied with the system allow for removal and replacement of the fascia cover in retrofit applications, helping to reduce costs and to expedite project completion. The consistent and crisp lines of the extruded cover cannot be matched by a formed product. r ANSI/SPRI ES-1 approved r Tested face dimensions up to 9 inches r Engineered three-piece design allows various roof membrane thicknesses r 20-year Blow-Off / Leak-Tight warranty available r 20-year finish warranty available r 10-foot standard length r 24- and 22-gauge galvanized steel cant dam r Fascia fasteners included r Concealed 6-inch splice plate r Heavy gauge extruded aluminum cover r Post-coated Kynar® standard and custom colors r Mill finish available r Mitered and welded factory fabricated corners & accessories r No penetration of the roof membrane r Fully welded radii available www.imetco.com

1 1/4" ROOFING NAIL @ 18" o.c. MAX. (by OTHERS)

Product:

Face Size:

ES-FX600

6.0 inches

ES-FX750

7.5 inches

ES-FX900

9.0 inches


ES-F™ Series Fascia

ES-F Fascia FASCIA COVER x 10'-0"

The old-school gravel stop and fascia of the past is no longer acceptable for most roof systems of today. Fascia systems must be tested and approved to meet the ANSI/SPRI ES-1 standard as required by the IBC.

FASCIA CANT x 10'-0" 6" CONCEALED SPLICE PLATE @ EACH JOINT MEMBRANE FLASHING (by OTHERS) 1/2"

1 1/4" ROOFING NAIL @ 12" o.c. MAX. (by OTHERS)

1 1/2"

Once again, with its line of fully tested Edge Systems, IMETCO demonstrates its commitment to our customers by providing a full line of performance-inspired fascia and coping systems.

SPECIFY

Features and Benefits: r r r r r r r r r r r r

ANSI/SPRI ES-1 approved Tested face dimensions up to 9½ inches Two-piece design 10-foot standard lengths standard (other lengths available) 24- and 22-gauge galvanized steel cant dams Concealed 6-inch splice plate Factory fabricated corners and accessories Does not penetrate the roof membrane No exposed fasteners Installs securely with various roof membrane thicknesses 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish Warranty available

1 3/4" 1/2"

1 1/4" ROOFING NAIL @ 12" o.c. MAX. (by OTHERS)

Product:

Face Size:

ES-F500

5.0 inches

ES-F650

6.5 inches

ES-F800

8.0 inches

ES-F950

9.5 inches

Materials and Coatings r r r r r

.040, .050 & .063 aluminum 24- and 22-gauge galvanized steel 24- and 22-gauge stainless steel Pre-finished Kynar® coated aluminum and steel standard Post-coated Kynar® custom colors available

–5–


ES-C™ Series Coping

ES-C Sloped Coping COPING COVER x 10'-0"

Edge Systems from IMETCO are engineered for performance. A leader in highly engineered structural standing seam metal roofing, IMETCO understands the need for tested and secure metal Edge Systems. IMETCO tests our coping system based on the “real-life” ANSI/SPRI ES-1 method to meet or exceed your specific project requirements. That’s why our ES-C Series Coping system is one of the strongest in the industry.

6" CONCEALED SPLICE PLATE @ EACH JOINT ANCHOR PLATE @ 5'-0" o.c.

(4) FASTENERS PER ANCHOR PLATE

1 3/8" 3/4"

"B" (4" STD.)

"A"

Features and Benefits: r r r r r r r r r r r r r r

ANSI/SPRI ES-1 approved Tested wall widths up to 24 inches Tested face dimension up to 6 inches Snap on design 10-foot standard lengths (other lengths available) Install on wood nailers, masonry or steel parapet walls Heavy-gauge galvanized steel anchor plates (5’ o.c. standard placement) Anchor plate fasteners included Concealed 6-inch splice plate with butyl sealant tape Mitered and fully welded corners, end caps, transitions, etc. Single slope, peaked & flat profiles Fully welded radii 20-Year Blow-Off/Leak-Tight Warranty available 20-Year Finish Warranty available

(ACTUAL WALL WIDTH)

.040, .050, .063, .080 & .125 aluminum 24- and 22-gauge galvanized steel 24- and 22-gauge stainless steel Pre-finished Kynar® coated aluminum and steel standard Post-coated Kynar® custom colors available

www.imetco.com

1/4" CLEARANCE FOR WALL VARIATIONS

ES-C Peaked Coping COPING COVER x 10'-0" 6" CONCEALED SPLICE PLATE @ EACH JOINT ANCHOR PLATE @ 5'-0" o.c. (4) FASTENERS PER ANCHOR PLATE

5/8" 3/4"

"C"

"B" (4" STD.)

(4" STD.)

Materials and Coatings r r r r r

"C" (4" STD.)

"A" 1/8" (ACTUAL WALL WIDTH)

1/8" CLEARANCE FOR WALL VARIATIONS


EZ Edge™ Formed Line IMETCO’s EZ Edge line combines quality with economy. These products offer proven reliability and pleasing aesthetics at a lower cost than performance-inspired edge systems. All of the EZ Edge products are available with a 20-year Kynar® finish warranty, and the fascia and coping is available with a weather-tight warranty up to 10 years.

EZ Edge Sloped and Peaked Coping

Materials and Coatings r .032, .040, .050, .063, .080 & .125 aluminum r 24- and 22-gauge galvanized steel r 24-gauge stainless steel r Pre-finished Kynar® coated aluminum and steel standard r Post-coated Kynar® custom colors available

5/8" 7/8"

"B" (4" STD.)

"C"

"B"

"C" (4" STD.)

(4" STD.)

(4" STD.)

"A"

"A" (ACTUAL WALL WIDTH)

EZ Edge Formed Fascias and Extender

Features and Benefits: r Factory fabricated and field proven r Standard and project-specific profiles & sizes r Simple, strong design r 10-foot standard lengths (other lengths available) r Concealed 6-inch splice plates r Standard factory-fabricated corners, end caps, etc. r Mitered and fully welded corners, end caps, transitions, etc. available r Fully welded radius coping, fascia & gutter r 20-Year Blow-Off/Leak-Tight Warranty available r 20-Year Finish Warranty available

5/8"

5/8" 7/8"

4"

4"

SPECIFY

(SPECIFY)

1 1/2" EQUAL

(SPECIFY) (SPECIFY) (SPECIFY)

1 1/2"

EQUAL

1 1/2"

EZ Edge “A” and “D” Style Gutter, and Downspout 1"

1"

1"

1"

1"

1"

(SPECIFY) (SPECIFY)

(SPECIFY)

2"

1"

(SPECIFY)

(SPECIFY)

(SPECIFY)

–7–


The Total Solution IMETCO offers a full line of metal roofing, wall, and edge systems and accessories. Be sure to ask your representative for information about other products and solutions from IMETCO, such as:

Series 300 Standing Seam Metal Roofing System • Precision engineering for long-term weather-tight performance • Rigorously tested to be leakproof and to withstand hurricane-force winds • Ideal for structural and/or architectural applications • One-piece clip that facilitates unlimited thermal movement • Features a 2⅜-inch high symmetrical seam with a separate, easy-to-install seam cap • Factory-applied hot-melt sealant that remains isolated from the clip • Can be curved or tapered

IMETCO’s 28 standard, designer and premium colors are all “cool” colors, with SR measurements of .25 or better. Custom colors and specialty finishes are also available. Ask your IMETCO representative for more information, or to request a color chart.

Standard Colors Irish Mist

Almond Suede

Emerald Forest

Blue Sapphire

Tuscan Slate

Epic Bronze

Solar White

Cadet Gray

Sandstone

Chestnut

Georgian Brick

Opal Star

Colonial Red

Silver Cloud

Wedgewood

Weathered Copper

Total Metal Roof and Deck System • Series 300 standing seam metal roofing from IMETCO • Metal deck and insulation system from Martin Fireproofing • Single warranty for complete assembly

Designer Colors Iron Mountain

Cardinal Red

Carolina Coast

Natural Patina

Caribbean Coral

Merlot

DryDek® Underlayment Heat tolerant (260+°f) Engineered for metal and tile roofing Self-adhering, self-sealing 100% SBS-modified, fiberglassreinforced • 150-day exposure resistance • • • •

Premium Colors The IMETCO Advantage For more than a decade, we at IMETCO have enjoyed our reputation as a manufacturer committed to providing products of only the highest quality. Our staff comprises expertise in metal roofing, design, engineering, testing, code compliance, manufacturing, and more. Above all, our staff excels in providing unparalleled customer service.

At IMETCO, your satisfaction is our only measure of success!

Platinum Silver

Roman Copper

Brite Copper

Champagne

Preweathered Galvalume

Galaxy Blue

The colors above are for reference only. To select your final color, please request a metal color sample. Galvalume® is steel pre-treatment and a registered trademark of Biec International Inc. Hylar® is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Ausimont USA Inc. Kynar® is a fluorocarbon paint finish available on our metal products, and is a registered trademark of Elf Atochem North America Inc.

2070 Steel Drive  Tucker, GA 30084 800.646.3826 (p)  770.908.2264 (f) www.imetco.com

www.imetco.com

FM® (Factory Mutual) is a world leader in property loss prevention and control engineering, research, and training. Its research-based recommendations set new standards that reduce the chance of property loss due to fire, weather conditions, and failure of electrical or mechanical equipment. It is a registered trademark of Factory Mutual Global, and must be identified as such whenever referred to in print. Series 300® and all other trademarks are owned by Innovative Metals Company, Inc. (IMETCO).


PerformaEdge Brochure