A Complete Guide To Way Wipers

A Complete Guide To Way Wipers Way Wipers are used to wipe away oils and chips as the machine is operating.

Machine way wipers or way wipers act like a seal between a machine slide.

They work the same as the car windshield wipers, as they remove rain and snow for better result. Similarly, Machine Way Wipers are curated to protect the machines from debris, excess oils and dust. Machine Tool Wipers also provide the close tolerance machine tool slide- which saves the machine from cooling agents and bleaching agents. Dust and oil can impact the machine’s performance. The sturdy polyurethane blade is specially made to seal the blades against the agents that cause wear. In a nutshell, way wipers offer complete protection to your equipment.

Way wipers are created based on criteria such as resistance to microorganisms, hydrolysis, operating temperature, gasoline, bleaches, gasoline and many more.

TYPES OF WAY WIPERS: There are various types of way wipers depending upon the need. We have listed down the basic ones so that they can select the right one for you.

1. Custom Way Wipers: the Custom Way Wipers are made as per the specifications set by the customer. Further custom way wipers are divided into two types:

I.

Custom Fabricated Way Wipers: These way wipers are ideal for low to moderate volumes and are used in repair and maintenance.

They are usually fabricated from the corners and have straight lengths. Further, they are divide into two basic styles Type A for heavy coolants and chip loads, whereas Type B for tremendous wiping edge for heavy coolant applications.

II.

Custom Molded Way Wipers: These are made from high-quality polyurethane for unusual resistance. They are ideal for high volumes as metal chips offer the heavy chip load applications.

These wipers include pre-drilled mounting holes and moulded-in steel insert plates for easy and fast easy installation.

2. Stock Way Wipers: These way wipers save the costly maintenance, increase the service life and reduce the downtime of the machine tool.

They are usually moulded from oil-resistant Buna-N elastomer and abrasion. They are further divided into four types of steel.

3. Telescopic Way Wipers: These way wipers are used for space applications and telescopic cover steel. Keep the way wipers clean and prevent the dirt from entering. These way wipers are welded, screwed to the cover boxes and these way wipers come with protective corrosion oil and are made in individual moulds.